CVE-20XX-?
agent?

CVEs of 2025.

Every CVE published in 2025 that we hold, ranked by exploit odds.

322 CVEs · updated 2026-11-20 17:36 UTC

Reset all
  1. CVE-2025-66516

    Critical XXE in Apache Tika tika-core (1.13-3.2.1), tika-pdf-module (2.0.0-3.2.1) and tika-parsers (1.13-1.28.5) modules on all platforms allows an attacker to carry out XML External Entity injection via a crafted XFA file inside of a PDF. This CVE covers the same vulnerability as in CVE-2025-54988. However, this CVE expands the scope of affected packages in two ways. First, while the entrypoint for the vulnerability was the tika-parser-pdf-module as reported in CVE-2025-54988, the vulnerability and its fix were in tika-core. Users who upgraded the tika-parser-pdf-module but did not upgrade tika-core to >= 3.2.2 would still be vulnerable. Second, the original report failed to mention that in the 1.x Tika releases, the PDFParser was in the "org.apache.tika:tika-parsers" module.

    Other Library Apache Tika

    8.4 HIGH 89% exploit odds Fix listed
  2. CVE-2025-41646

    An unauthorized remote attacker can bypass the authentication of the affected software package by misusing an incorrect type conversion. This leads to full compromise of the device

    Drop everything Other Library Kunbus Revpi Status

    9.8 CRITICAL 51% exploit odds Fix listed
  3. CVE-2025-30220

    GeoServer is an open source server that allows users to share and edit geospatial data. GeoTools Schema class use of Eclipse XSD library to represent schema data structure is vulnerable to XML External Entity (XXE) exploit. This impacts whoever exposes XML processing with gt-xsd-core involved in parsing, when the documents carry a reference to an external XML schema. The gt-xsd-core Schemas class is not using the EntityResolver provided by the ParserHandler (if any was configured). This also impacts users of gt-wfs-ng DataStore where the ENTITY_RESOLVER connection parameter was not being used as intended. This vulnerability is fixed in GeoTools 33.1, 32.3, 31.7, and 28.6.1, GeoServer 2.27.1, 2.26.3, and 2.25.7, and GeoNetwork 4.4.8 and 4.2.13.

    Drop everything Other Library Geotools

    9.9 CRITICAL 44% exploit odds Fix listed
  4. CVE-2025-54988

    Critical XXE in Apache Tika (tika-parser-pdf-module) in Apache Tika 1.13 through and including 3.2.1 on all platforms allows an attacker to carry out XML External Entity injection via a crafted XFA file inside of a PDF. An attacker may be able to read sensitive data or trigger malicious requests to internal resources or third-party servers. Note that the tika-parser-pdf-module is used as a dependency in several Tika packages including at least: tika-parsers-standard-modules, tika-parsers-standard-package, tika-app, tika-grpc and tika-server-standard. Users are recommended to upgrade to version 3.2.2, which fixes this issue.

    Other Library Apache Tika

    8.4 HIGH 36% exploit odds Fix listed
  5. CVE-2025-53366

    The MCP Python SDK, called `mcp` on PyPI, is a Python implementation of the Model Context Protocol (MCP). Prior to version 1.9.4, a validation error in the MCP SDK can cause an unhandled exception when processing malformed requests, resulting in service unavailability (500 errors) until manually restarted. Impact may vary depending on the deployment conditions, and presence of infrastructure-level resilience measures. Version 1.9.4 contains a patch for the issue.

    Other Library

    8.7 HIGH 10% exploit odds Fix listed
  6. CVE-2024-45431

    OpenSynergy BlueSDK (aka Blue SDK) through 6.x has Improper Input Validation. The specific flaw exists within the BlueSDK Bluetooth stack. The issue results from the lack of proper validation of remote L2CAP channel ID (CID). An attacker can leverage this to create an L2CAP channel with the null identifier assigned as a remote CID.

    Other Library Opensynergy Blue Sdk

    5.3 MEDIUM 6% exploit odds No fix listed
  7. CVE-2025-1716

    picklescan before 0.0.21 does not treat 'pip' as an unsafe global. An attacker could craft a malicious model that uses Pickle to pull in a malicious PyPI package (hosted, for example, on pypi.org or GitHub) via `pip.main()`. Because pip is not a restricted global, the model, when scanned with picklescan, would pass security checks and appear to be safe, when it could instead prove to be problematic.

    Other Library mmaitre314 Picklescan

    5.3 MEDIUM 2% exploit odds Fix listed
  8. CVE-2025-0938

    The Python standard library functions `urllib.parse.urlsplit` and `urlparse` accepted domain names that included square brackets which isn't valid according to RFC 3986. Square brackets are only meant to be used as delimiters for specifying IPv6 and IPvFuture hosts in URLs. This could result in differential parsing across the Python URL parser and other specification-compliant URL parsers.

    Other Library

    6.3 MEDIUM 2% exploit odds Fix listed
  9. CVE-2025-2905

    Due to the improper configuration of XML parser, user-supplied XML is parsed without applying sufficient restrictions, enabling XML External Entity (XXE) resolution in multiple WSO2 Products. A successful XXE attack could allow a remote, unauthenticated attacker to: * Read sensitive files from the server’s filesystem. * Perform denial-of-service (DoS) attacks, which can render the affected service unavailable.

    Other Library wso2 Api Manager

    9.1 CRITICAL 1% exploit odds Fix listed
  10. CVE-2025-21613

    go-git is a highly extensible git implementation library written in pure Go. An argument injection vulnerability was discovered in go-git versions prior to v5.13. Successful exploitation of this vulnerability could allow an attacker to set arbitrary values to git-upload-pack flags. This only happens when the file transport protocol is being used, as that is the only protocol that shells out to git binaries. This vulnerability is fixed in 5.13.0.

    Other Library go-git Project go-git

    9.2 CRITICAL 1% exploit odds Fix listed
  11. CVE-2024-47081

    Requests is a HTTP library. Due to a URL parsing issue, Requests releases prior to 2.32.4 may leak .netrc credentials to third parties for specific maliciously-crafted URLs. Users should upgrade to version 2.32.4 to receive a fix. For older versions of Requests, use of the .netrc file can be disabled with `trust_env=False` on one's Requests Session.

    Other Library

    5.3 MEDIUM 1% exploit odds Fix listed
  12. CVE-2024-53995

    SickChill is an automatic video library manager for TV shows. A user-controlled `login` endpoint's `next_` parameter takes arbitrary content. Prior to commit c7128a8946c3701df95c285810eb75b2de18bf82, an authenticated attacker may use this to redirect the user to arbitrary destinations, leading to open redirect. Commit c7128a8946c3701df95c285810eb75b2de18bf82 changes the login page to redirect to `settings.DEFAULT_PAGE` instead of to the `next` parameter.

    Other Library

    1.9 LOW 1% exploit odds Fix listed
  13. CVE-2025-4318

    The AWS Amplify Studio UI component property expressions in the aws-amplify/amplify-codegen-ui package lack input validation. This could potentially allow an authenticated user who has access to create or modify components to run arbitrary JavaScript code during the component rendering and build process.

    Other Library

    9.0 CRITICAL 1.0% exploit odds Fix listed
  14. CVE-2025-34142

    An XML External Entity (XXE) injection vulnerability exists in ETQ Reliance on the CG (legacy) platform within the `/resources/sessions/sso` endpoint. The SAML authentication handler processes XML input without disabling external entity resolution, allowing crafted SAML responses to invoke external entity references. This could enable attackers to retrieve sensitive files or perform server-side request forgery (SSRF). The issue was addressed by disabling external entity processing for the affected XML parser in versions SE.2025.1 and 2025.1.2.

    Other Library

    6.9 MEDIUM 1.0% exploit odds Fix listed
  15. CVE-2025-32965

    xrpl.js is a JavaScript/TypeScript API for interacting with the XRP Ledger in Node.js and the browser. Versions 4.2.1, 4.2.2, 4.2.3, and 4.2.4 of xrpl.js were compromised and contained malicious code designed to exfiltrate private keys. Version 2.14.2 is also malicious, though it is less likely to lead to exploitation as it is not compatible with other 2.x versions. Anyone who used one of these versions should stop immediately and rotate any private keys or secrets used with affected systems. Users of xrpl.js should pgrade to version 4.2.5 or 2.14.3 to receive a patch. To secure funds, think carefully about whether any keys may have been compromised by this supply chain attack, and mitigate by sending funds to secure wallets, and/or rotating keys. If any account's master key is potentially compromised, disable the key.

    Other Library

    9.3 CRITICAL 0.9% exploit odds Fix listed
  16. CVE-2025-59532

    Codex CLI is a coding agent from OpenAI that runs locally. In versions 0.2.0 to 0.38.0, due to a bug in the sandbox configuration logic, Codex CLI could treat a model-generated cwd as the sandbox’s writable root, including paths outside of the folder where the user started their session. This logic bypassed the intended workspace boundary and enables arbitrary file writes and command execution where the Codex process has permissions - this did not impact the network-disabled sandbox restriction. This issue has been patched in Codex CLI 0.39.0 that canonicalizes and validates that the boundary used for sandbox policy is based on where the user started the session, and not the one generated by the model. Users running 0.38.0 or earlier should update immediately via their package manager or by reinstalling the latest Codex CLI to ensure sandbox boundaries are enforced. If using the Codex IDE extension, users should immediately update to 0.4.12 for a fix of the sandbox issue.

    Other Library

    8.6 HIGH 0.9% exploit odds Fix listed
  17. CVE-2021-27289

    A replay attack vulnerability was discovered in a Zigbee smart home kit manufactured by Ksix (Zigbee Gateway Module = v1.0.3, Door Sensor = v1.0.7, Motion Sensor = v1.0.12), where the Zigbee anti-replay mechanism - based on the frame counter field - is improperly implemented. As a result, an attacker within wireless range can resend captured packets with a higher sequence number, which the devices incorrectly accept as legitimate messages. This allows spoofed commands to be injected without authentication, triggering false alerts and misleading the user through notifications in the mobile application used to monitor the network.

    Other Library

    9.1 CRITICAL 0.9% exploit odds No fix listed
  18. CVE-2025-54365

    fastapi-guard is a security library for FastAPI that provides middleware to control IPs, log requests, detect penetration attempts and more. In version 3.0.1, the regular expression patched to mitigate the ReDoS vulnerability by limiting the length of string fails to catch inputs that exceed this limit. This type of patch fails to detect cases in which the string representing the attributes of a <script> tag exceeds 100 characters. As a result, most of the regex patterns present in version 3.0.1 can be bypassed. This is fixed in version 3.0.2.

    Other Library fastapi-guard Fastapi Guard

    7.8 HIGH 0.9% exploit odds Fix listed
  19. CVE-2025-22868

    An attacker can pass a malicious malformed token which causes unexpected memory to be consumed during parsing.

    Other Library Go Jws

    7.5 HIGH 0.9% exploit odds Fix listed
  20. CVE-2025-1686

    Versions of the package io.pebbletemplates:pebble from 0 and before 4.1.0 are vulnerable to External Control of File Name or Path via the include tag. A high privileged attacker can access sensitive local files by crafting malicious notification templates that leverage this tag to include files like /etc/passwd or /proc/1/environ. Workaround This vulnerability can be mitigated by disabling the include macro in Pebble Templates: java new PebbleEngine.Builder() .registerExtensionCustomizer(new DisallowExtensionCustomizerBuilder() .disallowedTokenParserTags(List.of("include")) .build()) .build();

    Other Library Pebbletemplates Pebble Templates

    4.8 MEDIUM 0.8% exploit odds Fix listed
  21. CVE-2025-22871

    The net/http package improperly accepts a bare LF as a line terminator in chunked data chunk-size lines. This can permit request smuggling if a net/http server is used in conjunction with a server that incorrectly accepts a bare LF as part of a chunk-ext.

    Other Library

    9.1 CRITICAL 0.8% exploit odds No fix listed
  22. CVE-2025-30204

    golang-jwt is a Go implementation of JSON Web Tokens. Starting in version 3.2.0 and prior to versions 5.2.2 and 4.5.2, the function parse.ParseUnverified splits (via a call to strings.Split) its argument (which is untrusted data) on periods. As a result, in the face of a malicious request whose Authorization header consists of Bearer followed by many period characters, a call to that function incurs allocations to the tune of O(n) bytes (where n stands for the length of the function's argument), with a constant factor of about 16. This issue is fixed in 5.2.2 and 4.5.2.

    Other Library

    7.5 HIGH 0.8% exploit odds Fix listed
  23. CVE-2025-10157

    A Protection Mechanism Failure vulnerability in mmaitre314 picklescan versions up to and including 0.0.30 allows a remote attacker to bypass the unsafe globals check. This is possible because the scanner performs an exact match for module names, allowing malicious payloads to be loaded via submodules of dangerous packages (e.g., 'asyncio.unix_events' instead of 'asyncio'). When the incorrectly considered safe file is loaded after scan, it can lead to the execution of malicious code.

    Other Library mmaitre314 Picklescan

    9.3 CRITICAL 0.8% exploit odds Fix listed
  24. CVE-2025-29923

    go-redis is the official Redis client library for the Go programming language. Prior to 9.5.5, 9.6.3, and 9.7.2, go-redis potentially responds out of order when `CLIENT SETINFO` times out during connection establishment. This can happen when the client is configured to transmit its identity, there are network connectivity issues, or the client was configured with aggressive timeouts. The problem occurs for multiple use cases. For sticky connections, you receive persistent out-of-order responses for the lifetime of the connection. All commands in the pipeline receive incorrect responses. When used with the default ConnPool once a connection is returned after use with ConnPool#Put the read buffer will be checked and the connection will be marked as bad due to the unread data. This means that at most one out-of-order response before the connection is discarded. This issue is fixed in 9.5.5, 9.6.3, and 9.7.2; however, 9.7.2 has been yanked and 9.7.3 is the lowest available patched version on the 9.7.x branch. As a workaround, set the flag `DisableIndentity` to `true` when constructing the client instance.

    Other Library

    3.7 LOW 0.8% exploit odds Fix listed
  25. CVE-2025-66471

    urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.0 and prior to 2.6.0, the Streaming API improperly handles highly compressed data. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. When streaming a compressed response, urllib3 can perform decoding or decompression based on the HTTP Content-Encoding header (e.g., gzip, deflate, br, or zstd). The library must read compressed data from the network and decompress it until the requested chunk size is met. Any resulting decompressed data that exceeds the requested amount is held in an internal buffer for the next read operation. The decompression logic could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This can result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data.

    Other Library Python urllib3

    8.9 HIGH 0.7% exploit odds Fix listed
  26. CVE-2025-4546

    A vulnerability was found in 1Panel-dev MaxKB up to 1.10.7. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Knowledge Base Module. The manipulation leads to csv injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.10.8 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early about this disclosure.

    Other Library Maxkb

    5.1 MEDIUM 0.7% exploit odds No fix listed
  27. CVE-2025-54126

    The WebAssembly Micro Runtime's (WAMR) iwasm package is the executable binary built with WAMR VMcore which supports WebAssembly System Interface (WASI) and command line interface. In versions 2.4.0 and below, iwasm uses --addr-pool with an IPv4 address that lacks a subnet mask, allowing the system to accept all IP addresses. This can unintentionally expose the service to all incoming connections and bypass intended access restrictions. Services relying on --addr-pool for restricting access by IP may unintentionally become open to all external connections. This may lead to unauthorized access in production deployments, especially when users assume that specifying an IP without a subnet mask implies a default secure configuration. This is fixed in version 2.4.1.

    Other Library Bytecodealliance Webassembly Micro Runtime

    6.9 MEDIUM 0.7% exploit odds Fix listed
  28. CVE-2025-62518

    astral-tokio-tar is a tar archive reading/writing library for async Rust. Versions of astral-tokio-tar prior to 0.5.6 contain a boundary parsing vulnerability that allows attackers to smuggle additional archive entries by exploiting inconsistent PAX/ustar header handling. When processing archives with PAX-extended headers containing size overrides, the parser incorrectly advances stream position based on ustar header size (often zero) instead of the PAX-specified size, causing it to interpret file content as legitimate tar headers. This issue has been patched in version 0.5.6. There are no workarounds.

    Other Library

    8.1 HIGH 0.7% exploit odds Fix listed
  29. CVE-2025-9556

    Langchaingo supports the use of jinja2 syntax when parsing prompts, which is in turn parsed using the gonja library v1.5.3. Gonja supports include and extends syntax to read files, which leads to a server side template injection vulnerability within langchaingo, allowing an attacker to insert a statement into a prompt to read the "etc/passwd" file.

    Other Library

    9.8 CRITICAL 0.7% exploit odds Fix listed
  30. CVE-2025-0377

    HashiCorp’s go-slug library is vulnerable to a zip-slip style attack when a non-existing user-provided path is extracted from the tar entry.

    Other Library Hashicorp go-slug

    7.5 HIGH 0.7% exploit odds Fix listed
  31. CVE-2025-32800

    Conda-build contains commands and tools to build conda packages. Prior to version 25.3.0, the pyproject.toml lists conda-index as a Python dependency. This package is not published in PyPI. An attacker could claim this namespace and upload arbitrary (malicious) code to the package, and then exploit pip install commands by injecting the malicious dependency in the solve. This issue has been fixed in version 25.3.0. A workaround involves using --no-deps for pip install-ing the project from the repository.

    Other Library Anaconda conda-build

    7.2 HIGH 0.7% exploit odds Fix listed
  32. CVE-2025-2591

    A vulnerability classified as problematic was found in Open Asset Import Library Assimp 5.4.3. This vulnerability affects the function MDLImporter::InternReadFile_Quake1 of the file code/AssetLib/MDL/MDLLoader.cpp. The manipulation of the argument skinwidth/skinheight leads to divide by zero. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The patch is identified as ab66a1674fcfac87aaba4c8b900b315ebc3e7dbd. It is recommended to apply a patch to fix this issue.

    Other Library Assimp

    5.3 MEDIUM 0.7% exploit odds Fix listed
  33. CVE-2025-14954

    A vulnerability has been found in Open5GS up to 2.7.6. Affected is the function ogs_pfcp_pdr_find_or_add/ogs_pfcp_far_find_or_add/ogs_pfcp_urr_find_or_add/ogs_pfcp_qer_find_or_add in the library lib/pfcp/context.c of the component QER/FAR/URR/PDR. The manipulation leads to reachable assertion. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is 442369dcd964f03d95429a6a01a57ed21f7779b7. Applying a patch is the recommended action to fix this issue.

    Other Library open5gs

    2.9 LOW 0.6% exploit odds Fix listed
  34. CVE-2025-47928

    Spotipy is a Python library for the Spotify Web API. As of commit 4f5759dbfb4506c7b6280572a4db1aabc1ac778d, using `pull_request_target` on `.github/workflows/integration_tests.yml` followed by the checking out the head.sha of a forked PR can be exploited by attackers, since untrusted code can be executed having full access to secrets (from the base repo). By exploiting the vulnerability is possible to exfiltrate `GITHUB_TOKEN` and secrets `SPOTIPY_CLIENT_ID`, `SPOTIPY_CLIENT_SECRET`. In particular `GITHUB_TOKEN` which can be used to completely overtake the repo since the token has content write privileges. The `pull_request_target` in GitHub Actions is a major security concern—especially in public repositories—because it executes untrusted code from a PR, but with the context of the base repository, including access to its secrets. Commit 9dfb7177b8d7bb98a5a6014f8e6436812a47576f reverted the change that caused the issue.

    Other Library

    9.1 CRITICAL 0.6% exploit odds Fix listed
  35. CVE-2025-5514

    Improper Handling of Length Parameter Inconsistency vulnerability in web server function on Mitsubishi Electric Corporation MELSEC iQ-F Series CPU module allows a remote unauthenticated attacker to delay the processing of the web server function and prevent legitimate users from utilizing the web server function, by sending a specially crafted HTTP request.

    Other Library

    5.3 MEDIUM 0.6% exploit odds No fix listed
  36. CVE-2025-55247

    Improper link resolution before file access ('link following') in .NET allows an authorized attacker to elevate privileges locally.

    Other Library Microsoft .net

    7.3 HIGH 0.6% exploit odds Fix listed
  37. CVE-2025-30153

    kin-openapi is a Go project for handling OpenAPI files. Prior to 0.131.0, when validating a request with a multipart/form-data schema, if the OpenAPI schema allows it, an attacker can upload a crafted ZIP file (e.g., a ZIP bomb), causing the server to consume all available system memory. The root cause comes from the ZipFileBodyDecoder, which is registered automatically by the module (contrary to what the documentation says). This vulnerability is fixed in 0.131.0.

    Other Library

    7.5 HIGH 0.6% exploit odds Fix listed
  38. CVE-2025-33108

    IBM Backup, Recovery and Media Services for i 7.4 and 7.5 could allow a user with the capability to compile or restore a program to gain elevated privileges due to a library unqualified call made by a BRMS program. A malicious actor could cause user-controlled code to run with component access to the host operating system.

    Other Library IBM I

    8.5 HIGH 0.6% exploit odds Fix listed
  39. CVE-2025-22376

    In Net::OAuth::Client in the Net::OAuth package before 0.29 for Perl, the default nonce is a 32-bit integer generated from the built-in rand() function, which is not cryptographically strong.

    Other Library

    5.3 MEDIUM 0.6% exploit odds Fix listed
  40. CVE-2025-43859

    h11 is a Python implementation of HTTP/1.1. Prior to version 0.16.0, a leniency in h11's parsing of line terminators in chunked-coding message bodies can lead to request smuggling vulnerabilities under certain conditions. This issue has been patched in version 0.16.0. Since exploitation requires the combination of buggy h11 with a buggy (reverse) proxy, fixing either component is sufficient to mitigate this issue.

    Other Library

    9.1 CRITICAL 0.6% exploit odds Fix listed
  41. CVE-2025-14955

    A vulnerability was found in Open5GS up to 2.7.5. Affected by this vulnerability is the function ogs_pfcp_handle_create_pdr in the library lib/pfcp/handler.c of the component PFCP. The manipulation results in improper initialization. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitation appears to be difficult. The exploit has been made public and could be used. The patch is identified as 773117aa5472af26fc9f80e608d3386504c3bdb7. It is best practice to apply a patch to resolve this issue.

    Other Library open5gs

    2.9 LOW 0.6% exploit odds Fix listed
  42. CVE-2025-30144

    fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6.

    Other Library

    6.5 MEDIUM 0.6% exploit odds Fix listed
  43. CVE-2024-54015

    A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.90), SIPROTEC 5 6MD85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 6MD86 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 6MD89 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 6MD89 (CP300) V9.6x (All versions < V9.68), SIPROTEC 5 6MU85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7KE85 (CP300) (All versions >= V8.80 < V10.0), SIPROTEC 5 7SA82 (CP150) (All versions < V9.90), SIPROTEC 5 7SA86 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SA87 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.90), SIPROTEC 5 7SD86 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SD87 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.90), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.90), SIPROTEC 5 7SJ85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SJ86 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SK82 (CP150) (All versions < V9.90), SIPROTEC 5 7SK85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.90), SIPROTEC 5 7SL86 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SL87 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SS85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7ST85 (CP300) (All versions >= V8.80 < V10.0), SIPROTEC 5 7ST85 (CP300) V9.6x (All versions < V9.68), SIPROTEC 5 7ST86 (CP300) (All versions < V10.0), SIPROTEC 5 7ST86 (CP300) V9.8x (All versions < V9.83), SIPROTEC 5 7SX82 (CP150) (All versions < V9.90), SIPROTEC 5 7SX85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7SY82 (CP150) (All versions < V9.90), SIPROTEC 5 7UM85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.90), SIPROTEC 5 7UT85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7UT86 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7UT87 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7VE85 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7VK87 (CP300) (All versions >= V8.80 < V9.90), SIPROTEC 5 7VU85 (CP300) (All versions < V9.90), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.2) (All versions < V9.90), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.2) V9.6 (All versions < V9.68), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.2) V9.8 (All versions < V9.83), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 2) (All versions < V9.90), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 2) V9.6 (All versions < V9.68), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 2) V9.8 (All versions < V9.83), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions >= V8.80 < V9.90), SIPROTEC 5 Communication Module ETH-BD-2FO V9.6 (All versions < V9.68), SIPROTEC 5 Communication Module ETH-BD-2FO V9.8 (All versions < V9.83), SIPROTEC 5 Compact 7SX800 (CP050) (All versions >= V9.50 < V9.90). Affected devices do not properly validate SNMP GET requests. This could allow an unauthenticated, remote attacker to retrieve sensitive information of the affected devices with SNMPv2 GET requests using default credentials.

    Other Library

    8.7 HIGH 0.6% exploit odds No fix listed
  44. CVE-2025-32949

    This vulnerability allows any authenticated user to cause the server to consume very large amounts of disk space when extracting a Zip Bomb. If user import is enabled (which is the default setting), any registered user can upload an archive for importing. The code uses the yauzl library for reading the archive. The yauzl library does not contain any mechanism to detect or prevent extraction of a Zip Bomb https://en.wikipedia.org/wiki/Zip_bomb . Therefore, when using the User Import functionality with a Zip Bomb, PeerTube will try extracting the archive which will cause a disk space resource exhaustion.

    Other Library Framasoft Peertube

    6.5 MEDIUM 0.6% exploit odds Fix listed
  45. CVE-2025-29926

    XWiki Platform is a generic wiki platform. Prior to 15.10.15, 16.4.6, and 16.10.0, any user can exploit the WikiManager REST API to create a new wiki, where the user could become an administrator and so performs other attacks on the farm. Note that this REST API is not bundled in XWiki Standard by default: it needs to be installed manually through the extension manager. The problem has been patched in versions 15.10.15, 16.4.6 and 16.10.0 of the REST module.

    Other Library Xwiki

    7.9 HIGH 0.6% exploit odds Fix listed
  46. CVE-2025-13033

    A vulnerability was identified in the email parsing library due to improper handling of specially formatted recipient email addresses. An attacker can exploit this flaw by crafting a recipient address that embeds an external address within quotes. This causes the application to misdirect the email to the attacker's external address instead of the intended internal recipient. This could lead to a significant data leak of sensitive information and allow an attacker to bypass security filters and access controls.

    Other Library

    7.5 HIGH 0.6% exploit odds Fix listed
  47. CVE-2025-22978

    eladmin <=2.7 is vulnerable to CSV Injection in the exception log download module.

    Other Library Eladmin

    9.8 CRITICAL 0.6% exploit odds Fix listed
  48. CVE-2025-54584

    GitProxy is an application that stands between developers and a Git remote endpoint (e.g., github.com). In versions 1.19.1 and below, an attacker can craft a malicious Git packfile to exploit the PACK signature detection in the parsePush.ts file. By embedding a misleading PACK signature within commit content and carefully constructing the packet structure, the attacker can trick the parser into treating invalid or unintended data as the packfile. Potentially, this would allow bypassing approval or hiding commits. This issue is fixed in version 1.19.2.

    Other Library Finos Gitproxy

    7.0 HIGH 0.6% exploit odds Fix listed
  49. CVE-2025-54803

    js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. In versions below 1.0.2, a prototype pollution vulnerability in js-toml allows a remote attacker to add or modify properties of the global Object.prototype by parsing a maliciously crafted TOML input. This is fixed in version 1.0.2.

    Other Library Sunnyadn js-toml

    7.9 HIGH 0.6% exploit odds Fix listed
  50. CVE-2025-10816

    A security flaw has been discovered in Jinher OA 2.0. This affects an unknown part of the file /c6/Jhsoft.Web.module/ToolBar/GetWordFileName.aspx/?text=GetUrl&style=add of the component XML Handler. Performing manipulation results in xml external entity reference. The attack may be initiated remotely. The exploit has been released to the public and may be exploited.

    Other Library Jinher Oa

    5.5 MEDIUM 0.6% exploit odds No fix listed

CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.