Just published.
The newest CVEs, straight from CVE.org and NVD.
-
CVE-2026-116232
A weakness has been identified in Oray Pugongying X5 Pro 7.6.1. This affects the function snmp_set of the component SNMP Handler. Executing a manipulation of the argument info.community can lead to crlf injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-116223
A flaw has been found in icret EasyImage up to 2.8.7. The impacted element is an unknown function of the file app/del.php. Executing a manipulation of the argument hash can lead to improper privilege management. The attack can be launched remotely. The exploit has been published and may be used. This patch is called b12cb67d447bcbb67e21c8f011d0f5638229760c. A patch should be applied to remediate this issue.
-
CVE-2026-111974
The GiveWP WordPress plugin before 4.19.0.1 does not restrict the currency of a donation to the one the site or form accepts, while comparing its amount limits as bare numbers, allowing unauthenticated users to make donations below a form's configured minimum or fixed amount.
-
CVE-2026-116121
A vulnerability was identified in NocoDB up to 2026.08.0. This issue affects some unknown processing of the file users.service.ts of the component Registration. Such manipulation leads to race condition. The attack may be performed from remote. The attack requires a high level of complexity. The exploitability is assessed as difficult. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way.
-
CVE-2026-116119
A vulnerability was found in NocoDB up to 2026.08.0. This affects an unknown part of the file packages/nocodb/src/services/users/users.service.ts of the component Password-Reset Flow. The manipulation results in race condition. The attack can be executed remotely. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way.
-
CVE-2026-116115
A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-116106
A security vulnerability has been detected in HeyCyan App 1.0.103 on Android. Affected by this vulnerability is an unknown functionality of the component FileProvider. The manipulation leads to improper access controls. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-116108
A flaw has been found in openbq-org OpenBB up to 4.7.2/5.0.0. This affects an unknown part of the file openbb_platform/core/openbb_core/app/model/api_settings.py of the component Local API Server. This manipulation causes improper access controls. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-115823
Starman versions before 0.4019 for Perl send response bodies for HEAD requests, desynchronizing responses on keep-alive connections. For a HEAD request Starman omits chunked framing but still writes the body returned by the application, on both the array and streaming response paths. Responses with a 1xx, 204 or 304 status also carry the body. On a keep-alive or pipelined connection the client reads those bytes as the start of the next response. A front-end proxy that reuses upstream connections may then pair responses with the wrong requests.
-
CVE-2026-116196
Rclone before v1.75.2 contains a credential exposure vulnerability in the b2 backend that leaks the live account Authorization token and SSE-C keys on HTTP redirects from --b2-download-url hosts. Attackers can observe a same-host HTTPS-to-HTTP downgrade redirect to capture the cleartext B2 token, or receive cross-host redirects disclosing SSE-C customer encryption keys.
-
CVE-2026-116197
Edgeless Systems Contrast from 1.21.0 before 1.25.0 contains a non-deterministic registry selection flaw in imagepuller that can prefer wildcard configuration entries over concrete domain matches. When a pull configuration lists both a concrete domain and its parent wildcard, registry credentials, CA bundles, or mirror settings intended for the wildcard may be applied to the concrete registry, leaking credentials or pull metadata.
-
CVE-2026-116198
Snipe-IT before 8.7.0 contains a missing encryption vulnerability in Api\AssetsController::store that writes plaintext into encrypted-flagged custom-field columns when callers lack assets.view.encrypted_custom_fields. Authenticated API users without that permission can create assets whose sensitive custom-field values persist unencrypted in the database, exposing them through backups, replicas, or direct database access.
-
CVE-2026-116200
Snipe-IT before 8.6.3 ignores the ldap_start_tls() return value in Ldap::connectToLdap(), allowing on-path attackers to force cleartext LDAP binds. Attackers can answer the StartTLS request with a protocol error to capture service-account credentials and end-user login passwords.
-
CVE-2026-116201
Snipe-IT before 8.5.0 contains a SAML assertion replay vulnerability that allows attackers to reuse captured assertions by exploiting a non-atomic nonce check in the SAML acs handler. Attackers can send concurrent POST requests to /saml/acs with one captured assertion to obtain multiple authenticated victim sessions that evade IdP-driven revocation.
-
CVE-2026-116172
vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC converter that allows remote attackers to bypass max_logprobs limits via CandidateTokens.top_n. Attackers can send Generate or GenerateStream requests with oversized or integer-wrapping top_n values to trigger torch.topk failures that terminate EngineCore.
-
CVE-2026-116174
vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC Generate and GenerateStream service that forwards unchecked prompt token IDs to EngineCore. Attackers can submit requests with out-of-vocabulary prompt.token_ids values to trigger a fatal embedding lookup failure that terminates EngineCore and leaves the server unhealthy.
-
CVE-2026-116164
Parse Server before 8.6.100 and 9.0.0 before 9.10.4-alpha.3 does not reject reserved internal field names in client object writes, allowing clients to store or clear internal fields. Attackers can write a reserved field that makes reads of an object fail on MongoDB, disrupting queries on that class for all users, or clear their own account lockout state and password history to bypass lockout and password policies.
-
CVE-2026-116166
SiYuan 3.6.0 before 3.8.7 accepts and persists the networkServeTLS setting but never enforces it, so the kernel port keeps serving full API access over plain HTTP alongside HTTPS. Network-adjacent attackers can sniff the cleartext login flow and session cookie, which lacks the Secure attribute while responses omit HSTS, to hijack kernel API sessions.
-
CVE-2026-116145
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-32 contains a security policy bypass caused by an incomplete fix for the policy bypass reported in GHSA-jjp4-3fwf-393j. An attacker able to supply input to ImageMagick can evade configured security policy restrictions, allowing operations the policy was intended to block.
-
CVE-2026-115973
A vulnerability was identified in FaveoSuite Faveo Helpdesk 2.0.3. Affected by this issue is the function ForgotPasswordController::sendResetLinkEmail/PasswordController::reset of the file app/Http/Controllers/Auth/ForgotPasswordController.php. The manipulation leads to weak password recovery. The attack may be initiated remotely. The vendor was contacted early about this disclosure.
-
CVE-2026-115933
Postiz signs its session, invitation and password reset tokens with one shared secret and without any marker of what a token is for. A route that refreshes the credentials of a browser-extension channel signed data taken from the request itself and stored the result where the requesting user can read it back. A user could therefore obtain a validly signed token containing any claims they choose, which the application accepts as a session, as an organization invitation with a chosen role, as a password reset or as an enterprise provisioning token. A second, narrower route that creates team invitations signs extra fields from the request body in the same way.
-
CVE-2026-116019
Grav 2.0.15 before 2.2.13 contains an allowlist bypass vulnerability that allows page editors to invoke arbitrary public static methods by relocating data-*@ directives with unset-name@ or integer keys. Attackers with page-edit permission can embed crafted fields in Flex form overrides in page frontmatter to call methods like Folder::delete or Utils::download, deleting directories, overwriting files, or reading files outside the page tree.
-
CVE-2026-116013
OpenResty lua-resty-dns before 0.24 contains an improper input validation vulnerability in parse_section() and _decode_name() that fails to check resource record lengths against the received message. Attackers controlling or spoofing a queried nameserver can send truncated record headers or RDATA, raising uncaught Lua exceptions in resolver:query() that abort requests and break name resolution.
-
CVE-2026-115802
A weakness has been identified in InternScience InternAgent 1.5.0. This affects the function train of the file tasks/AutoChem/code/experiment.py of the component LoRA Loading. This manipulation of the argument base_model_name_or_path causes inclusion of functionality from untrusted control sphere. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.
-
CVE-2026-115937
The Mollie webhook endpoint accepts two independent, attacker-controlled parameters and never verifies that they belong together: * commerceTransactionHash — selects which Craft Commerce transaction is completed * id — selects which Mollie payment is queried for its status An unauthenticated attacker holding any paid Mollie payment ID from the merchant’s account can pair it with any transaction hash. Commerce queries Mollie, sees status: paid, and marks the target transaction successful for that transaction’s full amount, regardless of how much was actually paid.
-
CVE-2026-115889
Wasmtime is a runtime for WebAssembly. Prior to 36.0.19 and 43.0.0, the Cranelift compiler backend bit-packs SSA value indices in a way that can silently overflow in release builds when compiling a sufficiently large or specially crafted Wasm function with many SSA values. The overflow can make Cranelift reference incorrect IR values, causing arbitrary miscompilation, type confusion, and other attacker-controlled effects that may escape the Wasm sandbox on any architecture using the default Cranelift backend. This issue is fixed in versions 36.0.19 and 43.0.0.
-
CVE-2026-115892
Wasmtime is a runtime for WebAssembly. From 46.0.0 until 48.0.7 and 49.0.4, lowering a host-created component-model stream or future into a guest can omit a required payload-type check after the value passes through guest code and returns through StreamAny, FutureAny, Val::Stream, Val::Future, or an equivalent typed reader. A malicious guest that controls exported function types or returned values can cause the host to pass the type-erased value to a guest expecting a different payload type, which panics the Wasmtime host. This issue is fixed in versions 48.0.7 and 49.0.4.
-
CVE-2026-115893
Wasmtime is a runtime for WebAssembly. Prior to 36.0.19, 48.0.7, and 49.0.4, the Cranelift compiler backend on aarch64 can compile a Wasm br_table instruction with more than approximately 256,000 targets so that it has an incorrect conditional branch target. The branch can then jump to arbitrary other code at a user-controlled offset, allowing a user-controlled Wasm module to escape the sandbox on aarch64 engines using the default Cranelift backend. This issue is fixed in versions 36.0.19, 48.0.7, and 49.0.4.
-
CVE-2026-115883
LangGraph checkpoint savers provide Postgres- and SQLite-backed state persistence for LangGraph workflows and agents. Prior to langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2, PostgresStore, AsyncPostgresStore, SqliteStore, and AsyncSqliteStore flatten namespace labels with ".".join(namespace), while BaseStore validates labels only for put and aput. Unvalidated dotted labels passed through get, search, delete, list_namespaces, their asynchronous equivalents, or direct batch and abatch operations can resolve to another tenant's stored namespace, allowing cross-namespace reads, overwrites, or deletion. InMemoryStore is not affected because it compares namespace tuples. This issue is fixed in langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2.
-
CVE-2026-75524
OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.2.2, an attacker overbooks an agent, placing multiple appointments into a single time slot that the system is designed to keep exclusive. The number of overlapping appointments equals the number of concurrent requests, and one booking token is enough because the token is consumed after the insert. This results in the integrity of the booking-calendar breaking and availability being denied to other clients. This issue has been patched in version 2.2.2.
-
CVE-2026-83813
Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.names.dns.DNSDatagramProtocol accepts a UDP DNS response for a pending query when its 16-bit transaction ID matches but does not verify that the response came from the queried host and port. An attacker able to deliver a packet to the resolver's listening port with the correct transaction ID can inject a forged answer. The standard twisted.names.client.Resolver uses a new random source port for each query, increasing off-path attack complexity, while applications that reuse a DNSDatagramProtocol instance expose only the transaction-ID search space after the first query. A successful forgery can redirect hostname resolution and enable mail interception, server-side request forgery, or man-in-the-middle positioning. This issue is fixed in version 26.10.0rc1.
-
CVE-2026-58202
OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.0.0, the account-confirmation link in emails is built from the request Host header, with no allowlist. The unauthenticated POST /api/auth/resend-confirmation rotates a pending invitee's confirmation token and emails a link whose host comes from the request. An attacker who sends one resend-confirmation with Host: attacker.example and a pending invitee's email causes that invitee to receive a confirmation email whose only link points to the attacker. If the invitee clicks, the one-time confirmation token reaches the attacker, who then confirms the account on the real tenant domain and registers a passkey they control, taking over the account before the legitimate invitee ever uses it. All released versions through v1.1.0 are affected; no patched version exists yet. Reaching the app with a spoofed Host depends on the front proxy: the stock Caddy catch-all forwards it, while an operator who configures explicit per-tenant proxy blocks is not affected (see Details 4). The invite path builds links from the trusted tenant.domain (invite/+server.ts:204-210); the resend-confirmation path builds them from the request Host. This issue has been patched in version 2.0.0.
-
CVE-2026-115877
Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.web.http.HTTPChannel.headerReceived rejects a NUL byte in an HTTP header value but accepts a bare carriage return or bare line feed. Because Twisted splits header lines only on CRLF, a hidden Content-Length header can remain folded into another value while a lenient front end treats the bare character as a line terminator. The resulting framing disagreement can smuggle a following request past front-end access controls, poison a shared connection or cache, and expose a later client to the wrong response. This issue is an incomplete-fix residual of earlier Twisted request-smuggling protections. This issue is fixed in version 26.10.0rc1.
-
CVE-2026-79980
The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.
-
CVE-2026-105481
A flaw in Node.js HTTP Agent connection reuse can cause a client to accept as valid a response that was sent before the client has sent the request. This is an incomplete fix of CVE-2026-48931. The guard that destroys idle keep-alive sockets when unexpected data arrives only runs when the event loop polls for I/O. If an unsolicited response has already reached the socket but has not been read yet when the socket is handed to a new request, for example because the event loop was busy with synchronous work, the guard is removed without seeing it and the data is parsed as the response to the new request. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
-
CVE-2026-106070
A flaw in the Node.js `zlib.ZipFile` API can cause it to return bytes that do not belong to the requested entry after the local and central header validation fails. When `zipEntry.modified` is read on an archive whose local header does not match its central directory, either directly or while compacting the archive, the validation error is caught but the parsed local header is left cached without a content offset. A later content read then returns attacker-controlled bytes from the start of the file instead of rejecting the archive, and CRC-32 verification still passes because the attacker controls the central directory CRC. A Node.js-based scanner can therefore approve different content from what another ZIP implementation extracts from the same archive. This vulnerability affects Node.js **26.x**.
-
CVE-2026-58497
Uni-CLI gives people and agents one command interface for websites, browsers, desktop applications, local tools, and MCP. Prior to version 0.225.2, Uni-CLI exposed the legacy JSON-RPC-over-HTTP MCP transport on loopback without validating browser Origin headers before routing requests. A malicious web page could send a CORS simple POST request, such as text/plain, to the local /mcp endpoint and deliver a JSON-RPC body to the dispatcher. If the user had started the local MCP HTTP transport, that page could drive tools/call requests against the user's local Uni-CLI server. The Streamable HTTP transport already enforced this browser-to-localhost boundary. The legacy stateless HTTP path did not, so the two HTTP transports had drifted. This issue is about the browser-to-localhost boundary; it does not change Uni-CLI's local-code-execution trust model. This issue has been patched in version 0.225.2.
-
CVE-2026-55222
Isar is an integration system for automated root filesystem generation. In versions 0.11 and newer, /etc/apt/trusted.gpg.d is created manually during bootstrap setup to be able to deploy local keys. By that, the directory is owned by the calling user (the one that executes Isar) instead of root. If the calling user's id is identical to one of an unprivileged user inside the image, this user is able to alter existing keys and deploy new ones, silently breaking the apt repo integrity protection. The issue is has no impact on those images that use an immutable rootfs, or if apt is never invoked. Changing only the keys does not trigger an exploit, it's just one step in a chain. An attacker would also have to manipulate a remote repo or intercept non-secure communication with it. This issue has been patched via commit 29e84ed.
-
CVE-2026-115478
obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. From 1.0.1 until 1.31.4, `create_entity`, `link_entities`, `rename_entity`, `unlink_entities` and `delete_entity` regenerate memory notes from SQLite at the computed `memory/<type>/<name>.md` path without reliably preserving note ownership or the consistency of a failed lifecycle operation. During shared materialization, a hand-authored note or an orphan left by a different entity whose name sanitized to the same path could have its entire body overwritten on the next write naming that type and name, with non-owned frontmatter preserved. `rename_entity` also seeded the destination path with a direct atomic write without validating ownership and could overwrite a foreign note there. Separately, several tools mutated SQLite before fallible filesystem work: `create_entity` and `link_entities` inserted the row or relation before materialization; `rename_entity` updated the entity, including a retired status, before updating its note; `unlink_entities` removed a relation before rematerializing the source note; and `delete_entity`'s cascade removed the target and its relations before rematerializing neighbouring notes. A later filesystem failure could therefore leave a row or relation changed and the memory graph inconsistent with the notes on disk even when the operation failed. An authorized caller with the required memory-tool permissions could, without intending to, destroy the body of a vault note outside the entity being written; `delete_entity` additionally requires its deletion permission and destructive confirmation, which this memory flaw does not bypass. Snapshots-before-write through `restore_note` mitigate the overwrite only where snapshots are enabled and the note had previously been written through obsidian-tc. This issue is fixed in version 1.31.4.
-
CVE-2026-115477
obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. From 1.13.0 until 1.31.4, on a Streamable HTTP deployment with `auth.jwtSecret` configured and a 2026-07-28-era client declaring `elicitation.form` support, a dispatch-gated tool call offered an `inputRequired` confirmation could still complete after the human declined or cancelled, or the elicitation response was omitted or malformed, provided the client echoed the validly bound `requestState` on resubmission. The server trusted an authentic, call-bound state as proof of approval even though that state was minted before the `elicitation/create` leg was asked and proved only that the resubmission belonged to the same call. A client behaving incorrectly or under an attacker's control could therefore execute dispatch-gated destructive vault operations without the human's approval, while still requiring the caller's ordinary tool permissions. Only tools marked `destructive: true` or requiring a scope with a human-in-the-loop floor were reachable through this bypass. The sixteen handler-side conditionally gated tools, including `write_note` overwrite and `move_note`, did not read elicitation state on the modern wire and let neither approval nor decline through that path. Affected deployments using stdio or leaving `auth.jwtSecret` unset instead used the CLI `elicit_token` fallback and did not offer this `requestState` round trip. The fix does not prevent a malicious client from reporting a fabricated approval, because the server cannot verify that the client displayed the form or that a human saw it. This issue is fixed in version 1.31.4.
-
CVE-2026-93630
A hostname canonicalization vulnerability in the email HTML sanitizers of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to bypass the restriction on forms that target the Zimbra host. DefangFilter and the OWASP ActionAttributePolicy compare the form-action hostname with the request hostname before browser URL canonicalization. A percent-encoded hostname can therefore survive sanitization while the browser submits the form to the normal Zimbra origin with the recipient's authentication cookie. This permits authenticated form requests from a crafted email after the recipient opens it in Classic and submits the form. The issue is present in ZCS 10.1.16 and 10.1.21. It does not bypass an endpoint's CSRF-token checks; a state-changing attack additionally requires an endpoint that accepts the resulting request without that protection.
-
CVE-2026-115479
baserCMS is a website development framework. In versions 5.2.5 before 5.3.2 and 5.4.0 before 5.4.2, an unauthenticated visitor can supply a comma-separated address list in a public mail form's email field and cause a single auto-reply to be addressed to multiple third parties. MailMessageMailer::sendFormToUser() passes the visitor-controlled userMail value to parseAndNormalizeMailAddresses(), which splits it with explode(',') and supplies every resulting address to setTo(). Newly created forms with an email-type field are affected when the separate, optional VALID_EMAIL server-side validation is not enabled; browser type=email validation does not prevent crafted requests. The bundled contact form enables VALID_EMAIL and is not affected. The auto-reply uses the site's sender identity and includes partially attacker-controlled content, allowing abuse of the site to deliver unsolicited mail. This issue has been patched in versions 5.3.2 and 5.4.2.
-
CVE-2026-115480
baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2.
-
CVE-2026-115786
A mailbox quota-accounting vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to consume another user’s mailbox quota by repeatedly sharing and revoking a document. Creation of the recipient’s shared-file record charges the document size to mailbox-wide usage. Revocation deletes the record and reverses its folder counters without reversing the mailbox-wide charge. Repeated normal share notifications therefore accumulate quota usage after the visible records are gone. On accounts with a finite quota, this can prevent incoming mail and other size-increasing operations without recipient interaction. The issue affects ZCS 10.1.16 and 10.1.20.
-
CVE-2026-99086
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed.
-
CVE-2026-99080
In the Linux kernel, the following vulnerability has been resolved: fs: Free any excess xarray nodes in clear_inode() For many years we've had a hard to hit leak of xarray nodes. Hugh documented it well in commit 786b31121a2c. Recently people and syzbot have found ways to force it to happen with madvise. Rather than fix the leaks where they happen, just call xa_destroy() which has the side-effect of cycling the i_pages lock.
-
CVE-2026-99082
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.
-
CVE-2026-99084
In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock.
-
CVE-2026-99085
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU.
-
CVE-2026-99071
In the Linux kernel, the following vulnerability has been resolved: ipv4: do not warn on route notification size race Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added asynchronous route notifications for hardware flag changes. fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later fills it with fib_dump_info() while holding only RCU. With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. fib_dump_info() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners.
The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.