Network gear CVEs.
Published CVEs that affect network gear software, ranked by exploit odds.
-
CVE-2026-121931
A security vulnerability has been detected in Linksys WRT54GL 4.30.18. The impacted element is the function system of the file apply.cgi of the component Traceroute Diagnostic Function. Such manipulation of the argument traceroute_ip leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121930
A weakness has been identified in Linksys WRT54GL 4.30.18. The affected element is the function system of the file apply.cgi of the component Ping Diagnostic. This manipulation of the argument ping_ip causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121932
A vulnerability was detected in Linksys E5350 1.0.00.037. This affects the function system of the file /wizard/apply.cgi. Performing a manipulation of the argument ping_ip/traceroute_ip results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-92697
FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, the NetFlow v9 collector calls strlen() on an attacker-controlled interface-description field without bounding the scan to the field’s declared length. Although fields longer than 128 bytes are excluded from this operation, an accepted field without a null terminator can cause reads beyond the field and packet buffer. An unauthenticated remote attacker who can send crafted UDP packets to the collector can trigger an out-of-bounds read and potentially crash the process, causing denial of service. No fixed release is available as of this review.
-
CVE-2026-121933
A flaw has been found in Linksys E5350 1.0.00.037. This impacts the function save_settings of the file /wizard/apply.cgi of the component Setup Wizard. Executing a manipulation of the argument wizard_router_pwd can lead to missing authentication. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-123961
A security vulnerability has been detected in TOTOLINK CA300-PoE 6.2c.884. This impacts the function setWiFiBasicConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument KeyStr leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.
-
CVE-2026-121615
A vulnerability was determined in Linksys E5600 1.1.0.26. Affected is an unknown function of the file /cgi-bin/mesh_login.cgi of the component Login Handler. Executing a manipulation can lead to improper authentication. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-107155
A permissive cross-domain policy vulnerability has been identified in the SonicOS management interface, which in specific conditions could potentially enable a remote unauthenticated attacker to perform unauthorized operations.
-
CVE-2026-121618
A weakness has been identified in Linksys E5600 1.1.0.26. This affects an unknown part of the file /cgi-bin/fqc.cgi of the component Factory Quality Control. This manipulation causes information disclosure. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-124560
A vulnerability was found in D-Link DIR-878 1.20B05. This affects the function GetCAPTCHAsetting of the file bin/prog.cgi of the component HNAP Handler. Performing a manipulation of the argument uid results in heap-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-107154
A session validation vulnerability has been identified in the SonicOS management interface, which in specific conditions could potentially enable a remote unauthenticated attacker to perform unauthorized operations.
-
CVE-2026-121639
A Missing Authentication for Critical Function vulnerability in WatchGuard AuthPoint Gateway allows a remote unauthenticated attacker with network access to the AuthPoint Gateway host to disrupt authentication services and delete the local directory synchronization configuration.
-
CVE-2026-77708
A pre-authentication stack-based buffer overflow vulnerability has been identified in the SonicOS TACACS+ authentication client, which in specific conditions could potentially enable a remote unauthenticated attacker to cause an application level denial of service.
-
CVE-2026-77709
A pre-authentication heap-based buffer overflow vulnerability has been identified in the SonicOS TACACS+ authentication client, which in specific conditions could potentially enable a remote unauthenticated attacker to cause an application level denial of service.
-
CVE-2026-124057
A security flaw has been discovered in TOTOLINK CA300-PoE 6.2c.884. This impacts the function setWiFiMultipleConfig of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument Key1Str1 results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.
-
CVE-2026-123025
An OS Command Injection vulnerability was discovered in the Google Cloud DNS validation module of the OPNsense os-acme-client plugin through 4.17. The DnsGcloud::prepare() method decodes the dns_gcloud_key model field and directly interpolates the string fields gcloud_account and gcloud_project into a shell command passed to proc_open() via LeUtils::run_shell_command() without any validation or escaping. A remote authenticated user with privileges to issue or renew certificates through the WebGUI/API can achieve arbitrary code execution as root.
-
CVE-2026-124564
A weakness has been identified in D-Link DIR-878 1.20B05. Affected by this issue is the function GetListDirectory of the file bin/prog.cgi of the component HNAP Handler. This manipulation of the argument ListDirectoryPath causes path traversal. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-19868
An authentication enforcement vulnerability in SonicOS SSLVPN service may allow a user with valid credentials for an alternate authentication method to bypass SAML authentication controls. Successful exploitation may also bypass SAML-enforced multi-factor authentication (MFA).
-
CVE-2026-82308
A pre-authentication heap-based buffer overflow vulnerability has been identified in the SonicOS SSL-VPN service, which could potentially enable a remote unauthenticated attacker to cause an application level denial of service.
-
CVE-2026-124561
A vulnerability was determined in D-Link DIR-878 1.20B05. This impacts the function SetVLANSettings of the file prog.cgi of the component HNAP Handler. Executing a manipulation of the argument VID can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-124562
A vulnerability was identified in D-Link DIR-878 1.20B05. Affected is the function SetWanSettings of the component HNAP Handler. The manipulation of the argument ConfigDNS/Primary/ConfigDNS/Secondary leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-124563
A security flaw has been discovered in D-Link DIR-878 1.20B05. Affected by this vulnerability is the function SetWanSettings of the component HNAP Handler. The manipulation of the argument Primary/Secondary results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121609
A vulnerability was identified in Qihoo 360 Whole Home Router M5 4.0.17.1566. This issue affects the function Home of the file /etc/init.d/mpt of the component Boot Script. The manipulation leads to hard-coded credentials. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-124059
A security vulnerability has been detected in TOTOLINK CA300-PoE 6.2c.884. Affected by this vulnerability is the function setWiFiWdsAddConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ApCliKeyStr leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.
-
CVE-2026-97371
ntopng is a web-based network traffic monitoring application. Prior to 6.7.260721, ndpi_get_custom_category_match writes a four-byte nDPI protocol-category value through a pointer to the two-byte id variable in IpAddress::reloadBlacklist in src/IpAddress.cpp during packet dissection and host initialization. A remote unauthenticated attacker on a monitored network segment can send packets that match custom-category rules, causing stack corruption and denial of service without user interaction. This issue is fixed in version 6.7.260721.
-
CVE-2026-121617
A security flaw has been discovered in Linksys E5600 1.1.0.26. Affected by this issue is the function init_multipart of the file /cgi-bin/upload_fw.cgi of the component Header Parser. The manipulation results in out-of-bounds write. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121640
An Authentication Bypass by Capture-replay vulnerability in WatchGuard AuthPoint Gateway allows an attacker who has observed a legitimate request between AuthPoint Gateway components to replay it and perform unauthorized administrative actions, including disrupting authentication services.
-
CVE-2026-123958
A vulnerability was identified in TOTOLINK CA300-PoE 6.2c.884. The affected element is the function setLanConfig of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument lanDns/lanSecDns/langType leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used.
-
CVE-2026-123957
A vulnerability was determined in TOTOLINK CA300-PoE 6.2c.884. Impacted is the function setIpQosRules of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ipStart causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.
-
CVE-2026-123205
accel-ppp before 1.15.0 contains a heap buffer overflow vulnerability in the tcp, syslog and pgsql log targets that allows unauthenticated remote peers to overflow fixed heap buffers by producing log lines exceeding LOG_MAX_SIZE. Attackers within client-ip-range can send an L2TP Start-Control-Connection-Request with many string AVPs when verbose logging is enabled to corrupt heap memory and crash the daemon.
-
CVE-2026-119776
In all prior released versions of FRRouting, the OSPFv3 (for IPv6) implementation does not check that OSPFv3 packets have a link-local source address and either a link-local destination or one of the protocol multicast destination groups. This may enable malicious actors to establish OSPFv3 adjacencies from unexpectedly, distant IPv6 hosts. Proper usage of OSPFv3 authentication trailers (RFC 7166, as is best practice) prevents full exploitation of this issue, though may allow a malicious actor to waste CPU on authentication checks. Note the linked PR #23935 is not sufficient to fix the issue as it only verifies the source address. It is the destination address that must be checked. Required configuration: The OSPFv3 for IPv6 routing protocol must be running (ospf6d process) and in use (enabled globally with "router ospf6" and on specific interfaces with "ipv6 ospf6 area".) Workaround: either: * configure OSPFv3 authentication trailers ("ipv6 ospf6 authentication") * or ensure through firewall configuration that only packets with link-local or multicast destination addresses are accepted on input for IPv6 protocol 89 (OSPF). Note that checking the source address is insufficient, as some routers may (unexpectedly) forward packets with global-scoped IPv6 destination addresses even if they have link-local source addresses.
-
CVE-2026-84730
Stack-based buffer overflow in certain ASUS Router firmware allows an unauthenticated nearby attacker to execute arbitrary commands with root privileges via a crafted device name. Refer to the ' Security Update for ASUS Router AiCloud Feature ' section on the ASUS Security Advisory for more information.
-
CVE-2026-96146
IBM SevOne Network Performance Management 7.0.0 through 8.2.2 could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption.
-
CVE-2026-121616
A vulnerability was identified in Linksys E5600 1.1.0.26. Affected by this vulnerability is the function strcpy of the file /cgi-bin/mesh_login.cgi of the component JSON Request Parser. The manipulation of the argument username/password/token/source/cn/action leads to out-of-bounds write. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-18525
IBM Secure Proxy 6.1.0.0 through 6.2.1.2 could allow a remote authenticated attacker to cause a denial of service due to improper validation of listener IP address and port.
-
CVE-2026-121638
An Improper Certificate Validation vulnerability in WatchGuard AuthPoint Gateway allows an attacker with an on-path network position to intercept and modify communications between the AuthPoint Gateway and local authentication providers.
-
CVE-2026-93424
FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, peer_find_template() in src/netflow_plugin/netflow_collector.cpp and src/netflow_plugin/netflow_v9_collector.cpp returns a pointer into global_netflow9_templates after releasing the cache mutex. On deployments with at least two entries in netflow_ports, concurrent template redefinition and data-flowset processing can let add_update_peer_template() reassign the template and free its records vector while another listener dereferences the escaped pointer. An unauthenticated sender that can reach both NetFlow/IPFIX listener ports can trigger a heap-use-after-free and reliably crash FastNetMon. No fixed release is available as of this review.
-
CVE-2026-121637
An improper integrity validation vulnerability in WatchGuard AuthPoint Gateway's LDAP authentication callback allows a network attacker who has obtained a valid header signature to forge the authentication result and transaction identifier in the request body, resulting in unauthorized session outcomes.
-
CVE-2026-121967
Coder 2.28.0 before 2.29.22, 2.30.0 before 2.34.13, 2.35.0 before 2.35.10, 2.36.0 before 2.36.8, 2.37.0 before 2.37.5, and 2.38.0 before 2.38.1 contains a path traversal vulnerability in the AI Gateway passthrough router, which forwards percent-encoded dot segments upstream without rejecting them. Authenticated users can send paths such as %2e%2e or ..%2F under allowlisted prefixes to reach unintended provider endpoints using the deployment's centrally managed provider key.
-
CVE-2026-121944
sngrep through 1.9.0 contains an infinite loop vulnerability in capture_packet_reasm_ip() in src/capture.c that allows attackers to cause denial of service via crafted NFLOG TLVs. Attackers can supply a pcap file with link type NFLOG containing a non-payload TLV with length under 4, making the capture thread spin at full CPU and stop processing packets.
-
CVE-2026-19703
A weak password hashing vulnerability has been identified on SonicOS virtual appliances, which in specific conditions could potentially enable an attacker with existing local access to disclose a platform credential. The credential provides access to a limited subset of platform settings.
-
CVE-2026-84729
Out-of-bounds write in certain ASUS Router firmware allow an unauthenticated nearby attacker to write data beyond the intended buffer or potentially cause a denial-of-service (DoS) via a crafted packet. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-108018
The BigFix MCM admin portal is directly accessible from the internet without VPN or network restriction. A client-side configuration file discloses non-sensitive environment details. Exposing the configuration file publicly increases the attack surface and the risk of unauthorized access attempts.
-
CVE-2026-61813
ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. Prior to 2.9.15 and 3.0.17, the HttpsClient::download function in src/utils/https_client.cc sets libcurl CURLOPT_SSL_VERIFYHOST to 1 instead of the strict value 2L. Under adversary-in-the-middle and TLS interception conditions, this non-strict setting may weaken TLS peer identity validation and increase the risk of accepting a certificate for an unintended host. End-to-end exploitation is non-trivial in typical environments. This issue is fixed in versions 2.9.15 and 3.0.17.
-
CVE-2026-112116
An exposed IOCTL with insufficient access control in ASUS System Control Interface allows a local, low-privileged user to read and write arbitrary physical memory through crafted device control requests, ultimately resulting in a complete compromise of the affected system. Refer to the ' Security Update for ASUS System Control Interface ' section on the ASUS Security Advisory for more information.
-
CVE-2026-110464
Missing authorization in ASUS Armoury Crate allows a local attacker to write content into a specific file or registry location with Local System privileges, or to cause a recoverable system crash, via the service's exposed inter-process interface. Refer to the ' Security Update for Armoury Crate App ' section on the ASUS Security Advisory for more information.
-
CVE-2026-26248
A improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8, FortiSandbox Cloud 5.0.4 through 5.0.5, FortiSandbox PaaS 5.0.4 through 5.0.5 may allow an unauthenticated attacker to perform an XSS attack via social engineering and crafted HTTP requests.
-
CVE-2026-121371
On affected EOS versions with the eAPI service enabled, a specially crafted HTTP request can allow an unauthenticated, remote attacker to read arbitrary files, including sensitive credentials from the switch filesystem.
-
CVE-2026-121529
A origin validation error vulnerability in Fortinet FortiClientMac 7.4.0 through 7.4.7, FortiClientWindows 7.4.0 through 7.4.7, FortiClientWindows 7.2.0 through 7.2.14, FortiClientWindowsPAM 7.4.7, FortiClientWindowsPAM 7.2.14 may allow an unauthorized remote attacker to execute unauthorized code or commands. Successful exploitation requires interaction with the victim.
-
CVE-2026-121530
A improper authentication vulnerability in Fortinet FortiOS 7.6.0 through 7.6.6 may allow a remote authenticated attacker to gain improper access control via an invalid token after entering a valid username and password
CVEs that affect network gear, sorted by how likely they are to be exploited (EPSS).