Network gear CVEs.
Published CVEs that affect network gear software, ranked by exploit odds.
-
CVE-2026-104935
Authentication bypass by spoofing in ICS before version 25.1.3.0 allows a remote unauthenticated attacker to execute arbitrary commands. This does not impact ICS version 22.7R2.14 or prior.
-
CVE-2026-102764
The vulnerability exists within internal components of BeyondTrust’s Remote Support product. The components did not adequately validate the origin of the messages it received. Under the right conditions, this could allow an attacker to perform file operations on the appliance.
-
CVE-2026-111214
Netgate pfSense CE 2.7.0 through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with QinQ edit privilege to run commands by storing an unvalidated parent interface name. Attackers can save a crafted 'if' value, then edit the QinQ entry so it is interpolated into ifconfig shell commands, executing commands as root.
-
CVE-2026-111218
Netgate pfSense CE 2.7.0 through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Traffic Shaper Limiters privileges to execute root commands by tampering with the limiter number field. Attackers can submit a malicious hidden 'number' value when editing a limiter, then delete it so delete_queue() passes the unquoted value to dnctl via /bin/sh as root.
-
CVE-2026-111217
Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Virtual IP edit privileges to execute commands as root by storing an unvalidated CARP VHID. Attackers can supply a VHID containing shell metacharacters that executes via interface_ipalias_configure() ifconfig calls or get_carp_interface_status() when CARP status is rendered.
-
CVE-2026-111226
pfSense CE 2.4.5 through 2.9.0 contains an OS command injection vulnerability that allows authenticated WebGUI users with Advanced Admin Access privilege to execute commands as root via Login Protection settings. Attackers can submit sshguard threshold, block time, or detection time values containing newlines or $(...) that are written unvalidated to sshguard.conf and sourced as root on restart.
-
CVE-2026-111215
Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users to execute commands as root by supplying a crafted wireless parent interface name. Attackers with limited Wireless Edit or Interface Assignments privileges can submit values like ath0;<cmd> via interfaces_wireless_edit.php or interfaces_assign.php, which interface_wireless_clone() interpolates unescaped into an ifconfig shell command.
-
CVE-2026-76519
A vulnerability in the Advanced Malware Protection (AMP) feature of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to write arbitrary files on the underlying operating system. This vulnerability is due to improper handling of email attachments when the file reputation service is enabled. An attacker could exploit this vulnerability by sending an email that contains a crafted attachment through an affected device. A successful exploit could allow the attacker to write arbitrary files and execute commands with root privileges on the underlying operating system.
-
CVE-2026-111225
Netgate pfSense CE 2.5.0 through 2.9.0 contains an OS command injection vulnerability in openvpn.learn-address.sh that allows authenticated VPN clients to execute commands as the unbound user. Attackers can embed shell metacharacters in the certificate common name or username, which is interpolated unquoted into su -c strings, when DNS Resolver client registration is enabled.
-
CVE-2026-110908
Netgate pfSense FRR package (pfSense-pkg-frr) 2.0.2_1 and source revision 2.1.2_1 contain an OS command injection vulnerability in the FRR status filter. An authenticated WebGUI user with only the page-status-frr privilege can supply a filter value that breaks out of a single-quoted sed expression into which escapeshellarg() output is concatenated. Shell command substitution is then evaluated by a popen() pipeline, allowing attacker-selected commands to execute as root. There are updated FRR packages for pfSense Plus 26.07/26.03.1 and CE 2.9.0/2.8.1.
-
CVE-2026-111224
pfSense CE through 2.9.0 contains an OS command injection vulnerability in the OpenVPN openvpn.connect_async.sh script that allows authenticated VPN users to execute commands as root via crafted usernames. Attackers authenticated through RADIUS or LDAP can use usernames containing single quotes and shell metacharacters to break out of the eval'd pfctl anchor name on connect or disconnect.
-
CVE-2026-111216
Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with gateway edit privileges to execute commands as root by injecting shell metacharacters into an IPv6 link-local zone index. Attackers can set a gateway Monitor IP whose unvalidated zone carries a payload, which start_dpinger() passes unescaped to the dpinger shell command when monitoring is applied.
-
CVE-2026-101978
An OS Command Injection vulnerability in the bootzd zero-touch provisioning daemon of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated attacker on the management LAN to execute commands as root via a crafted gRPC response.
-
CVE-2026-101967
An OS Command Injection vulnerability in the bootzd zero-touch provisioning daemon of Juniper Networks Junos OS Evolved allows an unauthenticated attacker on the management LAN to execute commands as root via crafted DHCP response.
-
CVE-2026-102059
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the phone-home daemon (phcd) of Juniper Networks Junos OS and Junos OS Evolved on EX Series, SRX Series, and QFX Series allows an adjacent unauthenticated attacker to execute arbitrary commands with root privileges via a rogue DHCP server.
-
CVE-2026-113802
Wavlink WL-WN530BE1-A firmware through M30BE1_V251117 contains an OS command injection vulnerability in the sub_23B54 function of the ioos binary, which passes the unsanitized file_id parameter of /protocol.csp?opt=ovpn_file requests with type=del to popen(). A remote unauthenticated attacker can send a forged IP-FROM: 127.0.0.1 header to bypass login and execute arbitrary commands as root.
-
CVE-2026-110536
A vulnerability was determined in D-Link DIR-868L 2.01b05. This impacts the function system of the file /htdocs/cgibin of the component HNAP CGI Handler. Executing a manipulation of the argument SOAPACTION can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.
-
CVE-2026-116505
A vulnerability was found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. This impacts the function getDeviceInfo of the file /var/lib/misc/udhcpd.leases of the component device-information Handler. The manipulation of the argument MAC address results in command injection. The attack can be launched remotely. The exploit has been made public and could be used.
-
CVE-2026-121931
A security vulnerability has been detected in Linksys WRT54GL 4.30.18. The impacted element is the function system of the file apply.cgi of the component Traceroute Diagnostic Function. Such manipulation of the argument traceroute_ip leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121930
A weakness has been identified in Linksys WRT54GL 4.30.18. The affected element is the function system of the file apply.cgi of the component Ping Diagnostic. This manipulation of the argument ping_ip causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121932
A vulnerability was detected in Linksys E5350 1.0.00.037. This affects the function system of the file /wizard/apply.cgi. Performing a manipulation of the argument ping_ip/traceroute_ip results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-108804
A vulnerability was detected in TRENDnet TEW-751DR, TEW-752DRU and TEW733GR 1.03B01/1.03B03. Affected is the function fwrite of the file pigwidgeon.cgi of the component Web Management Backend. The manipulation of the argument service results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "As this router was EOL'd in 2011, we have no way of testing if such vulnerability exists. We will notify our customers of a potential vulnerability on this product." This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-120230
A vulnerability was found in WAVLINK WN701AE 260105. Impacted is the function del_vlan_group of the component ioos Web Backend. The manipulation of the argument vlan_name results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.
-
CVE-2026-120227
A vulnerability was detected in WAVLINK WN701AE M01AE_V260105. This affects the function del_staticrule of the file static_route_setting.sh of the component ioos Web Backend. Performing a manipulation of the argument rule_name results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-108894
A security flaw has been discovered in Linksys E1700 1.0.0.4.003. Impacted is the function addStaticRoute of the file /goform/addStaticRoute of the component Static Route Handler. Performing a manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-102031
An OS Command Injection vulnerability in TACACS of Juniper Networks Junos OS Evolved allows a low-privileged TACACS+-authenticated user to execute commands with root privileges when periodic TACACS+ authorization-refresh is enabled.
-
CVE-2026-52356
An OS command injection vulnerability in the /htdocs/web/diagnostic.php endpoint of D-Link DAP1160L A1_FW101WWb04 allows attackers to execute arbitrary commands via injecting arbitrary shell metacharacters.
-
CVE-2026-113391
A vulnerability has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function uploadlangs of the file /cgi-bin/mainfunction.cgi of the component Upload Endpoint. Such manipulation leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.7 is able to mitigate this issue. It is recommended to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-112370
A vulnerability was found in H3C Magic NX15 100R017. This issue affects the function sub_416874 of the file /usr/bin/usrlist. Performing a manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.
-
CVE-2013-20007
Linksys WAG200G through 1.01.06 contains an OS command injection vulnerability that allows authenticated attackers to execute commands by injecting backtick-delimited input into the timer_interval parameter. Attackers can send a crafted POST request to setup.cgi to start telnetd or download and run a backdoor, gaining full device control.
-
CVE-2026-120279
A flaw has been found in WAVLINK WN536AX6-A V260507. The affected element is an unknown function of the file /protocol.csp of the component openvpn_cli Handler. Executing a manipulation of the argument file_id can lead to os command injection. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-120280
A vulnerability has been found in WAVLINK WN536AX6-A V260507. The impacted element is the function wireguard_cli_group handler of the file /protocol.csp of the component WireGuard. The manipulation of the argument group_id/group_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-116506
A vulnerability was determined in TOTOLINK A950RG 4.1.2cu.5268_B20221104. Affected is the function apmib_set of the file firewall.so. This manipulation causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.
-
CVE-2026-113389
A vulnerability was detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this vulnerability is the function set_table of the file /cgi-bin/mainfunction.cgi of the component CGI Process. The manipulation of the argument sectiontype results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-113390
A flaw has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this issue is the function sub_182B0 of the file /cgi-bin/mainfunction.cgi of the component CGI Interface. This manipulation of the argument usefile/usescript/option causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-111227
Netgate pfSense CE through 2.9.0 contains a CRLF injection vulnerability in services_unbound_acls.php that allows authenticated users with the DNS Resolver: Access Lists privilege to inject Unbound configuration directives. Attackers can embed CR/LF characters in the aclname or aclaction fields written to access_lists.conf to add local-data, local-zone, or forward-zone directives and control DNS answers served to LAN clients.
-
CVE-2026-111228
Netgate pfSense CE from 2.7.1 through 2.9.0 contains a CRLF injection vulnerability in services_unbound_advanced.php that allows authenticated users with DNS Resolver: Advanced privilege to inject Unbound directives. Attackers can embed CR/LF characters in the unvalidated sock_queue_timeout parameter, which is written raw into unbound.conf, to override local records and forwarding for all clients.
-
CVE-2026-0322
A remote code execution (RCE) vulnerability in the management interface of Palo Alto Networks PAN-OS® software enables an authenticated attacker with network access to execute arbitrary code with root privileges on the firewall. The security risk posed by this issue is minimized by restricting access to the management interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series). Cloud NGFW and Prisma® Access are not impacted by this vulnerability.
-
CVE-2026-120238
A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This affects the function sub_4162A8 of the file /bin/ioos of the component ovpn_file Handler. Such manipulation of the argument file_id leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-120231
A vulnerability was determined in WAVLINK WN553X1-B V260403_2.0.0. The affected element is the function sub_416568 of the file /bin/ioos of the component OpenVPN CLI Handler. This manipulation of the argument file_id causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure.
-
CVE-2026-109108
A security vulnerability has been detected in Wavlink WL-WN530BE1-A 251117. This affects the function popen of the file /cgi-bin/uploadVpn.cgi. Such manipulation of the argument Type leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-113396
A weakness has been identified in DrayTek Vigor2960 1.5.1.6 Revision 8218. The impacted element is the function rename_table of the file /cgi-bin/mainfunction.cgi of the component Rename Table Handler. This manipulation of the argument newtable causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.5.1.7 is sufficient to resolve this issue. It is suggested to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-95727
A command injection vulnerability exists in HPE Networking VIA. Successful exploitation could allow an authenticated administrative user to execute arbitrary commands with elevated privileges on the underlying operating system.
-
CVE-2026-97854
Yamaha wireless LAN router NWR100 provided by Yamaha Corporation contains an OS command injection vulnerability. Arbitrary OS commands may be executed by sending a specially crafted request to the affected product.
-
CVE-2026-120189
A vulnerability was identified in D-Link DIR-505 1.10B02. Affected is the function save_upload_file/mp_upload_file of the file /usr/bin/tftpd of the component TFTP Upload Filename Handler. The manipulation leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.
-
CVE-2026-78799
Directory Traversal vulnerability in Quanxun Huiju Network Technology (Beijing) Co., Ltd IK-Q3000 Enterprise-grade Wi-Fi 6 wireless router Enterprise Edition: <= iKuai8_3.7.23_Enterprise Build 202606021825 - Free Edition: <= iKuai 8_4.0.304-beta allows a remote attacker to execute arbitrary code.
-
CVE-2026-75779
Improper Neutralization of Special Elements used in an OS Command (“OS Command Injection”) and Cross-Site Request Forgery (CSRF) in an ASUS router model allow an attacker to trick a logged-in administrator into visiting a phishing website, causing the router to execute arbitrary commands with root privileges. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
-
CVE-2026-106079
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in AccessManager in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with config-write privileges to achieve arbitrary command execution as root in the YANG configuration.
-
CVE-2026-103403
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in AccessManager in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker to perform arbitrary file deletion and arbitrary command execution via the deletion of an audit rule.
-
CVE-2026-100232
Post-authentication Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability has been identified in the SonicWall Network Security Manager (NSM) on-prem which in specific conditions could potentially enable a remote authenticated attacker to execute arbitrary OS commands, resulting in remote code execution.
CVEs that affect network gear, sorted by how likely they are to be exploited (EPSS).