CVE-20XX-?
agent?

Network gear CVEs.

Published CVEs that affect network gear software, ranked by exploit odds.

61 CVEs · updated 2026-11-18 23:12 UTC

Reset all
  1. CVE-2026-120490

    On Scalable Platforms, an administrator with permissions to edit and install the Access Control Policy and NAT rules can create a NAT rule that redirects traffic to the Gateway's Sync interface, bypassing the built-in Sync protection. This could allow the administrator to execute operating system commands and write files on the Gateway with superuser privileges.

    Other Network gear

    3.8 LOW 8% exploit odds No fix listed
  2. CVE-2026-83528

    Exposure of PII in Ivanti EPMM before version 12.11.0.0, 12.10.0.1, and 12.9.0.3 allows a remote authenticated attacker with admin privileges to leak GDPR protected user information.

    Other Network gear

    4.9 MEDIUM 0.9% exploit odds No fix listed
  3. CVE-2026-107155

    A permissive cross-domain policy vulnerability has been identified in the SonicOS management interface, which in specific conditions could potentially enable a remote unauthenticated attacker to perform unauthorized operations.

    Other Network gear

    8.8 HIGH 0.8% exploit odds No fix listed
  4. CVE-2026-91141

    A vulnerability in the default configuration of vsomeip allows a remote, unauthenticated attacker to trigger massive memory allocations by sending a small TCP packet with a large, attacker-declared SOME/IP length field. This can lead to immediate service termination via OOM-kill on memory-constrained systems or total host memory exhaustion through repeated connections.

    Other Network gear

    7.5 HIGH 0.6% exploit odds No fix listed
  5. CVE-2026-116235

    A flaw has been found in Oray Pugongying X5 Pro 7.6.1. Affected by this vulnerability is an unknown functionality of the component L2TP Authentication. This manipulation of the argument Username causes crlf injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    8.5 HIGH 0.6% exploit odds No fix listed
  6. CVE-2026-76487

    A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct access control bypass attacks on an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access parts of the network that are beyond the scope of their intended access.

    Other Network gear

    5.3 MEDIUM 0.6% exploit odds No fix listed
  7. CVE-2026-126171

    A use of externally-controlled format string vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer 7.2.0 through 7.2.12, FortiAnalyzer Cloud 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiAnalyzer Cloud 7.2.1 through 7.2.12, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager 7.2.0 through 7.2.12, FortiManager Cloud 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11, FortiManager Cloud 7.2.1 through 7.2.12 may allow an authenticated attacker to execute unauthorized commands via specially crafted HTTP request

    Other Network gear

    7.2 HIGH 0.6% exploit odds No fix listed
  8. CVE-2026-127277

    A security flaw has been discovered in Linksys EA8100 1.0.3.216940. The affected element is an unknown function of the file etc/init.d/service_smbd.sh of the component SMB Service. Performing a manipulation of the argument ANON_ACCESS results in improper initialization. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    9.3 CRITICAL 0.6% exploit odds No fix listed
  9. CVE-2026-127276

    A vulnerability was identified in Linksys EA8100 1.0.3.216940. Impacted is an unknown function of the component Web UI. Such manipulation leads to cookie without 'httponly' flag. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitability is considered difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    2.9 LOW 0.5% exploit odds No fix listed
  10. CVE-2026-76473

    As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76473 are related to issues concerning improper neutralization of special elements in output used by a downstream component that are grouped under the Common Weakness Enumeration (CWE) Class CWE-74.

    Other Network gear

    9.8 CRITICAL 0.5% exploit odds No fix listed
  11. CVE-2026-126254

    A numeric truncation error vulnerability in Fortinet FortiOS 8.0.0 through 8.0.1, FortiOS 7.6.0 through 7.6.7, FortiOS 7.4.0 through 7.4.12, FortiOS 7.2.0 through 7.2.13 may allow a configured ibgp neighbor to send malicious/malformed attributes to all connected routers via a specially crafted request

    Other Network gear

    9.6 CRITICAL 0.5% exploit odds No fix listed
  12. CVE-2026-116233

    A security vulnerability has been detected in Oray Pugongying X5 Pro 7.6.1. This impacts an unknown function of the component Dnsmasq. The manipulation of the argument rent_time leads to crlf injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    8.5 HIGH 0.5% exploit odds No fix listed
  13. CVE-2026-116234

    A vulnerability was detected in Oray Pugongying X5 Pro 7.6.1. Affected is an unknown function of the file /etc/ipsec.conf of the component IPsec Policy Handler. The manipulation of the argument secproto results in crlf injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    8.5 HIGH 0.5% exploit odds No fix listed
  14. CVE-2026-93434

    An XPath injection vulnerability in WatchGuard Fireware OS's SSH authentication process allows a remote, unauthenticated attacker with access to the management SSH interface to extract sensitive configuration data by submitting a specially crafted request.

    Other Network gear

    8.7 HIGH 0.5% exploit odds No fix listed
  15. CVE-2026-126722

    Rooxis RXR-12 Wi-Fi router contains an undocumented telnet backdoor daemon (/usr/bin/telnetd_startup) that, upon receipt of a precomputed AES-128-CBC magic packet using a firmware-wide static key and IV, enables telnet service with default credentials, providing remote root access. Firmware 20260813_c2169ea5 removes the UDP listener entirely, and users can update through their local web interface.

    Other Network gear

    9.8 CRITICAL 0.5% exploit odds No fix listed
  16. CVE-2026-20236

    As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20236 are related to issues concerning incorrect calculation that are grouped under the Common Weakness Enumeration (CWE) Base CWE-682.

    Other Network gear

    7.5 HIGH 0.4% exploit odds No fix listed
  17. CVE-2026-76527

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76527 are related to improper check or handling of exceptional conditions and are grouped under the Common Weakness Enumeration (CWE) CWE-703.

    Other Network gear

    9.8 CRITICAL 0.4% exploit odds No fix listed
  18. CVE-2026-76302

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76302 are related to improper neutralization and are grouped under the Common Weakness Enumeration (CWE) CWE-707.

    Other Network gear

    9.9 CRITICAL 0.4% exploit odds No fix listed
  19. CVE-2026-72756

    Routinator exits when an rsync URI for a file obtained over RRDP contains a path that cannot be stored on disk, such as too long file names, and folder names that overlap with existing file names.

    Other Network gear

    7.5 HIGH 0.4% exploit odds No fix listed
  20. CVE-2026-72753

    When Routinator encounters an RRDP notification file with gaps in the delta entries, it is still accepted and parsed, potentially leading to missing data. If it encounters too many delta entries it may run out of memory.

    Other Network gear

    8.2 HIGH 0.4% exploit odds No fix listed
  21. CVE-2026-119776

    In all prior released versions of FRRouting, the OSPFv3 (for IPv6) implementation does not check that OSPFv3 packets have a link-local source address and either a link-local destination or one of the protocol multicast destination groups. This may enable malicious actors to establish OSPFv3 adjacencies from unexpectedly, distant IPv6 hosts. Proper usage of OSPFv3 authentication trailers (RFC 7166, as is best practice) prevents full exploitation of this issue, though may allow a malicious actor to waste CPU on authentication checks. Note the linked PR #23935 is not sufficient to fix the issue as it only verifies the source address. It is the destination address that must be checked. Required configuration: The OSPFv3 for IPv6 routing protocol must be running (ospf6d process) and in use (enabled globally with "router ospf6" and on specific interfaces with "ipv6 ospf6 area".) Workaround: either: * configure OSPFv3 authentication trailers ("ipv6 ospf6 authentication") * or ensure through firewall configuration that only packets with link-local or multicast destination addresses are accepted on input for IPv6 protocol 89 (OSPF). Note that checking the source address is insufficient, as some routers may (unexpectedly) forward packets with global-scoped IPv6 destination addresses even if they have link-local source addresses.

    Other Network gear

    6.1 MEDIUM 0.4% exploit odds Fix listed
  22. CVE-2026-129101

    Cudy TR3000 before 2.5.42 contains a mass assignment vulnerability in the vpn.set_conf App RPC method that allows authenticated administrators to inject arbitrary OpenVPN server options. Attackers can set enabled=1 and a malicious up option in the openvpns object, which the openvpn-hotplug wrapper executes via /bin/sh as root.

    Other Network gear

    8.6 HIGH 0.4% exploit odds No fix listed
  23. CVE-2026-76408

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76408 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664.

    Other Network gear

    9.8 CRITICAL 0.4% exploit odds No fix listed
  24. CVE-2026-76301

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76301 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693.

    Other Network gear

    9.8 CRITICAL 0.4% exploit odds No fix listed
  25. CVE-2026-76491

    As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76491 are related to issues concerning reachable assertions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-617.

    Other Network gear

    7.5 HIGH 0.4% exploit odds No fix listed
  26. CVE-2026-76493

    As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76493 are related to issues concerning uncaught exceptions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-248.

    Other Network gear

    7.5 HIGH 0.4% exploit odds No fix listed
  27. CVE-2026-112362

    @fastify/express is a Fastify plugin that runs Express middleware inside Fastify. In versions 4.0.5 through 4.0.8, when Fastify runs with the non-default ignoreDuplicateSlashes option enabled, the plugin matches path-scoped Express middleware against a URL whose duplicate-slash normalization has also collapsed the separator after an absolute-form request target's scheme, so Fastify's router resolves the request to the scoped path and runs the handler while the Express layer no longer sees that path. As a result, a request using an absolute-form target can reach a handler on a scoped route such as an admin path while the middleware for authentication, authorization, or rate limiting is skipped. An unauthenticated attacker needs only the non-default ignoreDuplicateSlashes option to be enabled. The issue is fixed in @fastify/express 4.0.9, and users should upgrade to 4.0.9 or later. As a workaround, enforce authentication in a Fastify hook such as preHandler that runs after the router resolves the request, or leave ignoreDuplicateSlashes at its default.

    Other Network gear

    9.1 CRITICAL 0.4% exploit odds Fix listed
  28. CVE-2026-76528

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76528 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693.

    Other Network gear

    9.8 CRITICAL 0.4% exploit odds No fix listed
  29. CVE-2026-76526

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76526 are related to improper neutralization and are grouped under the Common Weakness Enumeration (CWE) CWE-707.

    Other Network gear

    8.8 HIGH 0.4% exploit odds No fix listed
  30. CVE-2026-116237

    A vulnerability was found in Oray Pugongying X5 Pro 7.6.1. This affects an unknown part of the component Dnsmasq. Performing a manipulation results in crlf injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    8.5 HIGH 0.4% exploit odds No fix listed
  31. CVE-2026-76300

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76300 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664.

    Other Network gear

    8.8 HIGH 0.4% exploit odds No fix listed
  32. CVE-2026-103401

    An Improper Link Resolution Before File Access ('Link Following') vulnerability in the unauthenticated web server handlers in Juniper Networks Session Smart Router and Session Smart Conductor allows a local unprivileged user to overwrite arbitrary files as root via unauthenticated API endpoints. This vulnerability can be exploited on Mist-managed routers and on unmanaged Routers that have not yet been onboarded to a Conductor. Routers already managed by Conductor are not affected.

    Other Network gear

    8.8 HIGH 0.3% exploit odds No fix listed
  33. CVE-2026-126247

    A use of externally-controlled format string vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an authenticated privileged attacker to execute unauthorized code or commands via http requests.

    Other Network gear

    7.2 HIGH 0.3% exploit odds No fix listed
  34. CVE-2026-119348

    Next.js is a React framework for building full-stack web applications. Prior to 15.5.29 and 16.4.5, self-hosted Next.js App Router route handlers and the fetch cache that return a fetched upstream response unchanged can emit a response whose declared framing does not match the body actually sent. When the application is behind an HTTP/1.1 reverse proxy that permits pipelined response queueing, a crafted upstream response can desynchronize responses between clients. The resulting desynchronization can inject a response into another client's queue or disclose another client's response. This issue is fixed in versions 16.4.5 and 15.5.29.

    Other Network gear Vercel next.js

    6.3 MEDIUM 0.3% exploit odds Fix listed
  35. CVE-2026-76530

    As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76530 are related to use of non-canonical URL paths for authorization decisions and are grouped under the Common Weakness Enumeration (CWE) CWE-647.

    Other Network gear

    8.8 HIGH 0.3% exploit odds No fix listed
  36. CVE-2026-107060

    Insecure permissions in Tailscale versionCode 297862600 allows unauthorized attackers to make arbitrary changes to another user's VPN configurations and preferences.

    Other Network gear

    9.1 CRITICAL 0.3% exploit odds No fix listed
  37. CVE-2026-121526

    A url redirection to untrusted site ('open redirect') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an unauthenticated attacker to perform an open redirect attack via crafted HTTP requests.

    Other Network gear

    6.1 MEDIUM 0.3% exploit odds No fix listed
  38. CVE-2026-120981

    On affected platforms running Arista EOS with VPLS-BGP enabled, an attacker who has established a BGP session with the PE router can affect the route advertisements of VPLS pseudowires, causing a churn of the established routes with other legitimate BGP peers.

    Other Network gear

    6.0 MEDIUM 0.3% exploit odds No fix listed
  39. CVE-2026-125108

    Rack is a modular Ruby web server interface. Prior to 2.2.25, 3.1.23, and 3.2.8, Rack::Multipart::Parser.parse_boundary can skip a leading empty or quoted boundary parameter in a multipart Content-Type header and accept a later parameter. Rack can therefore parse a request body with a boundary that a conforming intermediary would not derive, allowing form fields or file uploads to reach an application without the intended proxy or web application firewall inspection. This issue is fixed in versions 2.2.25, 3.1.23, and 3.2.8.

    Other Network gear

    3.7 LOW 0.2% exploit odds Fix listed
  40. CVE-2026-103404

    An Incorrect Permission Assignment for Critical Resource vulnerability in RoutingManager in Juniper Networks Session Smart Conductor allows a local user to access sensitive routing credentials via triggering processes that write to the /tmp directory.

    Other Network gear

    6.8 MEDIUM 0.2% exploit odds No fix listed
  41. CVE-2026-93459

    Use of externally-controlled format string in certain ASUS Router firmware allows a nearby administrator to read or write memory, potentially resulting in a denial-of-service, via crafted format specifiers sent to the logging/summary function. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.

    Other Network gear ASUS Router Firmware

    8.5 HIGH 0.2% exploit odds No fix listed
  42. CVE-2026-104259

    ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. Prior to 2.9.15 and 3.0.17, msre_fn_removeComments_execute in apache2/re_tfns.c and inplace() in src/actions/transformations/remove_comments.cc implement t:removeComments by copying the character immediately after a comment terminator without re-evaluating it. Adjacent comments can therefore leave a later comment in the transformed value, allowing inline-comment obfuscation to bypass rules that depend on comment stripping. When a comment terminator is the final content, the same copy reads one byte beyond the input buffer. This issue is fixed in versions 2.9.15 and 3.0.17.

    Other Network gear

    5.4 MEDIUM 0.2% exploit odds Fix listed
  43. CVE-2026-121529

    A origin validation error vulnerability in Fortinet FortiClientMac 7.4.0 through 7.4.7, FortiClientWindows 7.4.0 through 7.4.7, FortiClientWindows 7.2.0 through 7.2.14, FortiClientWindowsPAM 7.4.7, FortiClientWindowsPAM 7.2.14 may allow an unauthorized remote attacker to execute unauthorized code or commands. Successful exploitation requires interaction with the victim.

    Other Network gear

    9.6 CRITICAL 0.2% exploit odds No fix listed
  44. CVE-2026-124760

    P-Net before 1.0.4 sets the alarm receiver state to waiting for confirmation before the data of a received alarm notification is parsed. If the parsing fails the state is not restored, and later alarm notifications of the same priority are discarded without acknowledge until the Application Relationship is released. The Application Relationship and the cyclic data exchange keep working. The attacker must be able to send an alarm notification in the context of an established Application Relationship and requires ADJACENT network access.

    Other Network gear

    2.3 LOW 0.2% exploit odds No fix listed
  45. CVE-2026-123178

    An insufficient input validation vulnerability in the listed NETGEAR Orbi Models router allows an authenticated administrator connected to the local network to execute unauthorized commands and modify the router’s software and functionality, potentially compromising the integrity of the affected device.

    Other Network gear

    4.3 MEDIUM 0.2% exploit odds No fix listed
  46. CVE-2026-50106

    When NLnet Labs Unbound up to and including version 1.26.1 is configured with both a root trust anchor and an additional 'trust-anchor:' for an island-of-security zone whose parent is provably insecure under the root chain, a malicious actor who can deliver one forged NXDOMAIN response for a name inside the island, with the NSEC/SOA RRSIG 'SignerName' set to the insecure parent, tricks Unbound's validator to use the root trust anchor instead, and consecutively the insecure parent, thus causing that record to be treated as insecure and denying existence for records in the trust island.

    Other Network gear

    6.5 MEDIUM 0.2% exploit odds No fix listed
  47. CVE-2026-97350

    Securepoint SSL VPN Client v2 on Windows contains vulnerabilities in the handling of OpenVPN configurations and proxy settings that allow non-privileged local users to influence operations performed with NT AUTHORITY\SYSTEM privileges. Two attack vectors have been identified: * Improper authorization of configuration checksum updates: The privileged service does not properly validate the authorization of connecting clients when updating the checksum of an OpenVPN configuration. This allows a non-privileged local user to modify an OpenVPN configuration and set a valid checksum without administrator privileges. The modified configuration is subsequently processed with NT AUTHORITY\SYSTEM privileges. * Argument injection via proxy settings: The client does not properly validate or sanitize proxy settings before passing them as arguments to OpenVPN. A non-privileged local user can inject additional arguments through the proxy settings, influencing the execution of OpenVPN with NT AUTHORITY\SYSTEM privileges. This attack vector does not require direct communication with the privileged service or modification of the protected OpenVPN configuration.

    Other Network gear

    6.9 MEDIUM 0.2% exploit odds No fix listed
  48. CVE-2026-79980

    The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.

    Other Network gear

    5.6 MEDIUM 0.2% exploit odds Fix listed
  49. CVE-2026-99088

    In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: <TASK> set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800

    Other Network gear

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-98906

    In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload.

    Other Network gear

    unscored 0.2% exploit odds No fix listed

CVEs that affect network gear, sorted by how likely they are to be exploited (EPSS).