CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2022-50563
In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix UAF in run_timer_softirq() When dm_resume() and dm_destroy() are concurrent, it will lead to UAF, as follows: BUG: KASAN: use-after-free in __run_timers+0x173/0x710 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0 <snip> Call Trace: <IRQ> dump_stack_lvl+0x73/0x9f print_report.cold+0x132/0xaa2 _raw_spin_lock_irqsave+0xcd/0x160 __run_timers+0x173/0x710 kasan_report+0xad/0x110 __run_timers+0x173/0x710 __asan_store8+0x9c/0x140 __run_timers+0x173/0x710 call_timer_fn+0x310/0x310 pvclock_clocksource_read+0xfa/0x250 kvm_clock_read+0x2c/0x70 kvm_clock_get_cycles+0xd/0x20 ktime_get+0x5c/0x110 lapic_next_event+0x38/0x50 clockevents_program_event+0xf1/0x1e0 run_timer_softirq+0x49/0x90 __do_softirq+0x16e/0x62c __irq_exit_rcu+0x1fa/0x270 irq_exit_rcu+0x12/0x20 sysvec_apic_timer_interrupt+0x8e/0xc0 One of the concurrency UAF can be shown as below: use free do_resume | __find_device_hash_cell | dm_get | atomic_inc(&md->holders) | | dm_destroy | __dm_destroy | if (!dm_suspended_md(md)) | atomic_read(&md->holders) | msleep(1) dm_resume | __dm_resume | dm_table_resume_targets | pool_resume | do_waker #add delay work | dm_put | atomic_dec(&md->holders) | | dm_table_destroy | pool_dtr | __pool_dec | __pool_destroy | destroy_workqueue | kfree(pool) # free pool time out __do_softirq run_timer_softirq # pool has already been freed This can be easily reproduced using: 1. create thin-pool 2. dmsetup suspend pool 3. dmsetup resume pool 4. dmsetup remove_all # Concurrent with 3 The root cause of this UAF bug is that dm_resume() adds timer after dm_destroy() skips cancelling the timer because of suspend status. After timeout, it will call run_timer_softirq(), however pool has already been freed. The concurrency UAF bug will happen. Therefore, cancelling timer again in __pool_destroy().
-
CVE-2025-39983
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue This fixes the following UAF caused by not properly locking hdev when processing HCI_EV_NUM_COMP_PKTS: BUG: KASAN: slab-use-after-free in hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 Read of size 4 at addr ffff8880740f0940 by task kworker/u11:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u11:0 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci1 hci_rx_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 hci_num_comp_pkts_evt+0x1c8/0xa50 net/bluetooth/hci_event.c:4404 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 le_conn_complete_evt+0x3d6/0x1220 net/bluetooth/hci_event.c:5628 hci_le_enh_conn_complete_evt+0x189/0x470 net/bluetooth/hci_event.c:5794 hci_event_func net/bluetooth/hci_event.c:7474 [inline] hci_event_packet+0x78c/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Freed by task 9572: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_abort_conn_sync+0x5d1/0xdf0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
-
CVE-2022-49945
In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end t ---truncated---
-
CVE-2025-37807
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.
-
CVE-2023-52980
In the Linux kernel, the following vulnerability has been resolved: block: ublk: extending queue_size to fix overflow When validating drafted SPDK ublk target, in a case that assigning large queue depth to multiqueue ublk device, ublk target would run into a weird incorrect state. During rounds of review and debug, An overflow bug was found in ublk driver. In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means each ublk queue depth can be set as large as 4096. But when setting qd for a ublk device, sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io) will be larger than 65535 if qd is larger than 2728. Then queue_size is overflowed, and ublk_get_queue() references a wrong pointer position. The wrong content of ublk_queue elements will lead to out-of-bounds memory access. Extend queue_size in ublk_device as "unsigned int".
-
CVE-2025-21812
In the Linux kernel, the following vulnerability has been resolved: ax25: rcu protect dev->ax25_ptr syzbot found a lockdep issue [1]. We should remove ax25 RTNL dependency in ax25_setsockopt() This should also fix a variety of possible UAF in ax25. [1] WARNING: possible circular locking dependency detected 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted ------------------------------------------------------ syz.5.1818/12806 is trying to acquire lock: ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 but task is already holding lock: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_AX25){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x100 net/core/sock.c:3642 lock_sock include/net/sock.h:1618 [inline] ax25_kill_by_device net/ax25/af_ax25.c:101 [inline] ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026 dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563 dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820 sock_do_ioctl+0x240/0x460 net/socket.c:1234 sock_ioctl+0x626/0x8e0 net/socket.c:1339 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735 ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 do_sock_setsockopt+0x3af/0x720 net/socket.c:2324 __sys_setsockopt net/socket.c:2349 [inline] __do_sys_setsockopt net/socket.c:2355 [inline] __se_sys_setsockopt net/socket.c:2352 [inline] __x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_AX25); lock(rtnl_mutex); lock(sk_lock-AF_AX25); lock(rtnl_mutex); *** DEADLOCK *** 1 lock held by syz.5.1818/12806: #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 stack backtrace: CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/lockin ---truncated---
-
CVE-2022-49694
In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.
-
CVE-2022-49686
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix list double add in uvcg_video_pump A panic can occur if the endpoint becomes disabled and the uvcg_video_pump adds the request back to the req_free list after it has already been queued to the endpoint. The endpoint complete will add the request back to the req_free list. Invalidate the local request handle once it's been queued. <6>[ 246.796704][T13726] configfs-gadget gadget: uvc: uvc_function_set_alt(1, 0) <3>[ 246.797078][ T26] list_add double add: new=ffffff878bee5c40, prev=ffffff878bee5c40, next=ffffff878b0f0a90. <6>[ 246.797213][ T26] ------------[ cut here ]------------ <2>[ 246.797224][ T26] kernel BUG at lib/list_debug.c:31! <6>[ 246.807073][ T26] Call trace: <6>[ 246.807180][ T26] uvcg_video_pump+0x364/0x38c <6>[ 246.807366][ T26] process_one_work+0x2a4/0x544 <6>[ 246.807394][ T26] worker_thread+0x350/0x784 <6>[ 246.807442][ T26] kthread+0x2ac/0x320
-
CVE-2022-49669
In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one.
-
CVE-2022-49518
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type. Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes. Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data. In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end. In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.
-
CVE-2022-49391
In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function.
-
CVE-2022-49234
In the Linux kernel, the following vulnerability has been resolved: net: dsa: Avoid cross-chip syncing of VLAN filtering Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx.
-
CVE-2022-49186
In the Linux kernel, the following vulnerability has been resolved: clk: visconti: prevent array overflow in visconti_clk_register_gates() This code was using -1 to represent that there was no reset function. Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0) condition was always true. This lead to an out of bounds access in visconti_clk_register_gates().
-
CVE-2022-49047
In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix UAF in ep93xx_clk_register_gate() arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc] arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch if (IS_ERR(clk)) ^ arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released kfree(psc); ^~~~~~~~~~ arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed return &psc->hw; ^ ~~~~~~~~
-
CVE-2025-24122
A downgrade issue affecting Intel-based Mac computers was addressed with additional code-signing restrictions. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3. An app may be able to modify protected parts of the file system.
-
CVE-2025-21642
In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: sched: avoid using current->nsproxy Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ---truncated---
-
CVE-2025-39806
In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix slab out-of-bounds access in mt_report_fixup() A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40 [...]
-
CVE-2025-38599
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible OOB access in mt7996_tx() Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is set to IEEE80211_LINK_UNSPECIFIED
-
CVE-2022-49946
In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Prevent out-of-bounds access The while loop in raspberrypi_discover_clocks() relies on the assumption that the id of the last clock element is zero. Because this data comes from the Videocore firmware and it doesn't guarantuee such a behavior this could lead to out-of-bounds access. So fix this by providing a sentinel element.
-
CVE-2025-37810
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34
-
CVE-2024-52559
In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit() The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32 values that come from the user via the submit_lookup_cmds() function. This addition could lead to an integer wrapping bug so use size_add() to prevent that. Patchwork: https://patchwork.freedesktop.org/patch/624696/
-
CVE-2024-57834
In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1] If dvb->mux is not initialized successfully by vidtv_mux_init() in the vidtv_start_streaming(), it will trigger null pointer dereference about mux in vidtv_mux_stop_thread(). Adjust the timing of streaming initialization and check it before stopping it. [1] KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471 Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8 RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125 RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128 RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188 R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710 FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline] vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252 dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000 dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486 dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3f8/0xb60 fs/file_table.c:450 task_work_run+0x14e/0x250 kernel/task_work.c:239 get_signal+0x1d3/0x2610 kernel/signal.c:2790 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f
-
CVE-2025-38595
In the Linux kernel, the following vulnerability has been resolved: xen: fix UAF in dmabuf_exp_from_pages() [dma_buf_fd() fixes; no preferences regarding the tree it goes through - up to xen folks] As soon as we'd inserted a file reference into descriptor table, another thread could close it. That's fine for the case when all we are doing is returning that descriptor to userland (it's a race, but it's a userland race and there's nothing the kernel can do about it). However, if we follow fd_install() with any kind of access to objects that would be destroyed on close (be it the struct file itself or anything destroyed by its ->release()), we have a UAF. dma_buf_fd() is a combination of reserving a descriptor and fd_install(). gntdev dmabuf_exp_from_pages() calls it and then proceeds to access the objects destroyed on close - starting with gntdev_dmabuf itself. Fix that by doing reserving descriptor before anything else and do fd_install() only when everything had been set up.
-
CVE-2025-38582
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix double destruction of rsv_qp rsv_qp may be double destroyed in error flow, first in free_mr_init(), and then in hns_roce_exit(). Fix it by moving the free_mr_init() call into hns_roce_v2_init(). list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240 ... Call trace: __list_del_entry_valid+0x148/0x240 hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2] hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2] hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2] free_mr_exit+0x6c/0x120 [hns_roce_hw_v2] hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2] hns_roce_exit+0x118/0x350 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2] hclge_notify_roce_client+0x6c/0x160 [hclge] hclge_reset_rebuild+0x150/0x5c0 [hclge] hclge_reset+0x10c/0x140 [hclge] hclge_reset_subtask+0x80/0x104 [hclge] hclge_reset_service_task+0x168/0x3ac [hclge] hclge_service_task+0x50/0x100 [hclge] process_one_work+0x250/0x9a0 worker_thread+0x324/0x990 kthread+0x190/0x210 ret_from_fork+0x10/0x18
-
CVE-2025-37918
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access.
-
CVE-2022-49888
In the Linux kernel, the following vulnerability has been resolved: arm64: entry: avoid kprobe recursion The cortex_a76_erratum_1463225_debug_handler() function is called when handling debug exceptions (and synchronous exceptions from BRK instructions), and so is called when a probed function executes. If the compiler does not inline cortex_a76_erratum_1463225_debug_handler(), it can be probed. If cortex_a76_erratum_1463225_debug_handler() is probed, any debug exception or software breakpoint exception will result in recursive exceptions leading to a stack overflow. This can be triggered with the ftrace multiple_probes selftest, and as per the example splat below. This is a regression caused by commit: 6459b8469753e9fe ("arm64: entry: consolidate Cortex-A76 erratum 1463225 workaround") ... which removed the NOKPROBE_SYMBOL() annotation associated with the function. My intent was that cortex_a76_erratum_1463225_debug_handler() would be inlined into its caller, el1_dbg(), which is marked noinstr and cannot be probed. Mark cortex_a76_erratum_1463225_debug_handler() as __always_inline to ensure this. Example splat prior to this patch (with recursive entries elided): | # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events | # echo p do_el0_svc >> /sys/kernel/debug/tracing/kprobe_events | # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable | Insufficient stack space to handle exception! | ESR: 0x0000000096000047 -- DABT (current EL) | FAR: 0xffff800009cefff0 | Task stack: [0xffff800009cf0000..0xffff800009cf4000] | IRQ stack: [0xffff800008000000..0xffff800008004000] | Overflow stack: [0xffff00007fbc00f0..0xffff00007fbc10f0] | CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2 | Hardware name: linux,dummy-virt (DT) | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : arm64_enter_el1_dbg+0x4/0x20 | lr : el1_dbg+0x24/0x5c | sp : ffff800009cf0000 | x29: ffff800009cf0000 x28: ffff000002c74740 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 00000000604003c5 x22: ffff80000801745c x21: 0000aaaac95ac068 | x20: 00000000f2000004 x19: ffff800009cf0040 x18: 0000000000000000 | x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 | x11: 0000000000000010 x10: ffff800008c87190 x9 : ffff800008ca00d0 | x8 : 000000000000003c x7 : 0000000000000000 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000043a4 | x2 : 00000000f2000004 x1 : 00000000f2000004 x0 : ffff800009cf0040 | Kernel panic - not syncing: kernel stack overflow | CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xe4/0x104 | show_stack+0x18/0x4c | dump_stack_lvl+0x64/0x7c | dump_stack+0x18/0x38 | panic+0x14c/0x338 | test_taint+0x0/0x2c | panic_bad_stack+0x104/0x118 | handle_bad_stack+0x34/0x48 | __bad_stack+0x78/0x7c | arm64_enter_el1_dbg+0x4/0x20 | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 ... | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 ... | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | do_el0_svc+0x0/0x28 | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x18c/0x190 | Kernel Offset: disabled | CPU features: 0x0080,00005021,19001080 | Memory Limit: none | ---[ end Kernel panic - not syncing: kernel stack overflow ]--- With this patch, cortex_a76_erratum_1463225_debug_handler() is inlined into el1_dbg(), and el1_dbg() cannot be probed: | # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events | sh: write error: No such file or directory | # grep -w cortex_a76_errat ---truncated---
-
CVE-2025-22070
In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix NULL pointer dereference on mkdir When a 9p tree was mounted with option 'posixacl', parent directory had a default ACL set for its subdirectories, e.g.: setfacl -m default:group:simpsons:rwx parentdir then creating a subdirectory crashed 9p client, as v9fs_fid_add() call in function v9fs_vfs_mkdir_dotl() sets the passed 'fid' pointer to NULL (since dafbe689736) even though the subsequent v9fs_set_create_acl() call expects a valid non-NULL 'fid' pointer: [ 37.273191] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 37.322338] Call Trace: [ 37.323043] <TASK> [ 37.323621] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 37.324448] ? page_fault_oops (arch/x86/mm/fault.c:714) [ 37.325532] ? search_module_extables (kernel/module/main.c:3733) [ 37.326742] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.328006] ? search_bpf_extables (kernel/bpf/core.c:804) [ 37.329142] ? exc_page_fault (./arch/x86/include/asm/paravirt.h:686 arch/x86/mm/fault.c:1488 arch/x86/mm/fault.c:1538) [ 37.330196] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:574) [ 37.331330] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.332562] ? v9fs_fid_xattr_get (fs/9p/xattr.c:30) 9p [ 37.333824] v9fs_fid_xattr_set (fs/9p/fid.h:23 fs/9p/xattr.c:121) 9p [ 37.335077] v9fs_set_acl (fs/9p/acl.c:276) 9p [ 37.336112] v9fs_set_create_acl (fs/9p/acl.c:307) 9p [ 37.337326] v9fs_vfs_mkdir_dotl (fs/9p/vfs_inode_dotl.c:411) 9p [ 37.338590] vfs_mkdir (fs/namei.c:4313) [ 37.339535] do_mkdirat (fs/namei.c:4336) [ 37.340465] __x64_sys_mkdir (fs/namei.c:4354) [ 37.341455] do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) [ 37.342447] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by simply swapping the sequence of these two calls in v9fs_vfs_mkdir_dotl(), i.e. calling v9fs_set_create_acl() before v9fs_fid_add().
-
CVE-2021-47651
In the Linux kernel, the following vulnerability has been resolved: soc: qcom: rpmpd: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".
-
CVE-2024-56372
In the Linux kernel, the following vulnerability has been resolved: net: tun: fix tun_napi_alloc_frags() syzbot reported the following crash [1] Issue came with the blamed commit. Instead of going through all the iov components, we keep using the first one and end up with a malformed skb. [1] kernel BUG at net/core/skbuff.c:2849 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848 Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293 RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00 RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000 RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50 R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80 FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284 tipc_aead_decrypt net/tipc/crypto.c:894 [inline] tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844 tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109 tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668 __netif_receive_skb_list_ptype net/core/dev.c:5720 [inline] __netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x2b5/0x870 net/core/dev.c:6256 napi_complete include/linux/netdevice.h:567 [inline] tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_writev+0x1b6/0x360 fs/read_write.c:1096 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f
-
CVE-2025-40157
In the Linux kernel, the following vulnerability has been resolved: EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller When loading the i10nm_edac driver on some Intel Granite Rapids servers, a call trace may appear as follows: UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16 shift exponent -66 is negative ... __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common] i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac] skx_register_mci+0x159/0x220 [skx_edac_common] i10nm_init+0xcb0/0x1ff0 [i10nm_edac] ... This occurs because some BIOS may disable a memory controller if there aren't any memory DIMMs populated on this memory controller. The DIMMMTR register of this disabled memory controller contains the invalid value ~0, resulting in the call trace above. Fix this call trace by skipping DIMM enumeration on a disabled memory controller.
-
CVE-2025-39761
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Decrement TID on RX peer frag setup error handling Currently, TID is not decremented before peer cleanup, during error handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to out-of-bounds access in peer->rx_tid[]. Hence, add a decrement operation for TID, before peer cleanup to ensures proper cleanup and prevents out-of-bounds access issues when the RX peer frag setup fails. Found during code review. Compile tested only.
-
CVE-2025-39750
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Correct tid cleanup when tid setup fails Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(), the tid value is already incremented, even though the corresponding TID is not actually allocated. Proceed to ath12k_dp_rx_peer_tid_delete() starting from unallocated tid, which might leads to freeing unallocated TID and cause potential crash or out-of-bounds access. Hence, fix by correctly decrementing tid before cleanup to match only the successfully allocated TIDs. Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(), as decrementing the tid before cleanup in loop will take care of this. Compile tested only.
-
CVE-2025-43226
An out-of-bounds read was addressed with improved input validation. This issue is fixed in iOS 18.6 and iPadOS 18.6, iPadOS 17.7.9, macOS Sequoia 15.6, macOS Sonoma 14.7.7, tvOS 18.6, visionOS 2.6, watchOS 11.6. Processing a maliciously crafted image may result in disclosure of process memory.
-
CVE-2022-50218
In the Linux kernel, the following vulnerability has been resolved: iio: light: isl29028: Fix the warning in isl29028_remove() The driver use the non-managed form of the register function in isl29028_remove(). To keep the release order as mirroring the ordering in probe, the driver should use non-managed form in probe, too. The following log reveals it: [ 32.374955] isl29028 0-0010: remove [ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI [ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0 [ 32.385461] Call Trace: [ 32.385807] sysfs_unmerge_group+0x59/0x110 [ 32.386110] dpm_sysfs_remove+0x58/0xc0 [ 32.386391] device_del+0x296/0xe50 [ 32.386959] cdev_device_del+0x1d/0xd0 [ 32.387231] devm_iio_device_unreg+0x27/0xb0 [ 32.387542] devres_release_group+0x319/0x3d0 [ 32.388162] i2c_device_remove+0x93/0x1f0
-
CVE-2025-38034
In the Linux kernel, the following vulnerability has been resolved: btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref btrfs_prelim_ref() calls the old and new reference variables in the incorrect order. This causes a NULL pointer dereference because oldref is passed as NULL to trace_btrfs_prelim_ref_insert(). Note, trace_btrfs_prelim_ref_insert() is being called with newref as oldref (and oldref as NULL) on purpose in order to print out the values of newref. To reproduce: echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable Perform some writeback operations. Backtrace: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014 RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130 Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88 RSP: 0018:ffffce44820077a0 EFLAGS: 00010286 RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000 R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540 FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> prelim_ref_insert+0x1c1/0x270 find_parent_nodes+0x12a6/0x1ee0 ? __entry_text_end+0x101f06/0x101f09 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 btrfs_is_data_extent_shared+0x167/0x640 ? fiemap_process_hole+0xd0/0x2c0 extent_fiemap+0xa5c/0xbc0 ? __entry_text_end+0x101f05/0x101f09 btrfs_fiemap+0x7e/0xd0 do_vfs_ioctl+0x425/0x9d0 __x64_sys_ioctl+0x75/0xc0
-
CVE-2025-37923
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix oob write in trace_seq_to_buffer() syzbot reported this bug: ================================================================== BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260 CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 .... ================================================================== It has been reported that trace_seq_to_buffer() tries to copy more data than PAGE_SIZE to buf. Therefore, to prevent this, we should use the smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
-
CVE-2022-49846
In the Linux kernel, the following vulnerability has been resolved: udf: Fix a slab-out-of-bounds write bug in udf_find_entry() Syzbot reported a slab-out-of-bounds Write bug: loop0: detected capacity change from 0 to 2048 ================================================================== BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610 CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189 memcpy+0x3c/0x60 mm/kasan/shadow.c:66 udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ffab0d164d9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9 RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180 RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000 R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 3610: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:576 [inline] udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff8880123ff800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 150 bytes inside of 256-byte region [ffff8880123ff800, ffff8880123ff900) The buggy address belongs to the physical page: page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x123fe head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(), pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0 create_dummy_stack mm/page_owner.c: ---truncated---
-
CVE-2025-21934
In the Linux kernel, the following vulnerability has been resolved: rapidio: fix an API misues when rio_add_net() fails rio_add_net() calls device_register() and fails when device_register() fails. Thus, put_device() should be used rather than kfree(). Add "mport->net = NULL;" to avoid a use after free issue.
-
CVE-2023-52999
In the Linux kernel, the following vulnerability has been resolved: net: fix UaF in netns ops registration error path If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel.
-
CVE-2022-49090
In the Linux kernel, the following vulnerability has been resolved: arch/arm64: Fix topology initialization for core scheduling Arm64 systems rely on store_cpu_topology() to call update_siblings_masks() to transfer the toplogy to the various cpu masks. This needs to be done before the call to notify_cpu_starting() which tells the scheduler about each cpu found, otherwise the core scheduling data structures are setup in a way that does not match the actual topology. With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1` for !leaders in: notify_cpu_starting() cpuhp_invoke_callback_range() sched_cpu_starting() sched_core_cpu_starting() which leads to rq->core not being correctly set for !leader-rq's. Without this change stress-ng (which enables core scheduling in its prctl tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning and then a crash (trimmed for legibility): [ 1853.805168] ------------[ cut here ]------------ [ 1853.809784] task_rq(b)->core != rq->core [ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4 ... [ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 1854.231256] Call trace: [ 1854.233689] pick_next_task+0x3dc/0x81c [ 1854.237512] __schedule+0x10c/0x4cc [ 1854.240988] schedule_idle+0x34/0x54
-
CVE-2022-49083
In the Linux kernel, the following vulnerability has been resolved: iommu/omap: Fix regression in probe for NULL pointer dereference Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started triggering a NULL pointer dereference for some omap variants: __iommu_probe_device from probe_iommu_group+0x2c/0x38 probe_iommu_group from bus_for_each_dev+0x74/0xbc bus_for_each_dev from bus_iommu_probe+0x34/0x2e8 bus_iommu_probe from bus_set_iommu+0x80/0xc8 bus_set_iommu from omap_iommu_init+0x88/0xcc omap_iommu_init from do_one_initcall+0x44/0x24 This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV) as noted by Jason Gunthorpe <[email protected]>. Looks like the regression already happened with an earlier commit 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") that changed the function return type and missed converting one place.
-
CVE-2021-47655
In the Linux kernel, the following vulnerability has been resolved: media: venus: vdec: fixed possible memory leak issue The venus_helper_alloc_dpb_bufs() implementation allows an early return on an error path when checking the id from ida_alloc_min() which would not release the earlier buffer allocation. Move the direct kfree() from the error checking of dma_alloc_attrs() to the common fail path to ensure that allocations are released on all error paths in this function. Addresses-Coverity: 1494120 ("Resource leak")
-
CVE-2021-47660
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()' All error handling paths lead to 'out' where many resources are freed. Do it as well here instead of a direct return, otherwise 'log', 'ra' and 'log->one_page_buf' (at least) will leak.
-
CVE-2021-47643
In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: free before error exiting Fix leak in error path.
-
CVE-2022-50828
In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ==================================================================
-
CVE-2022-50226
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent kernel memory leak For some sev ioctl interfaces, input may be passed that is less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the buffer, the sev ioctl interfaces with the issue may return uninitialized slab memory. Currently, all of the ioctl interfaces in the ccp driver are safe, but to prevent future problems, change all ioctl interfaces that allocate memory with kmalloc to use kzalloc and memset the data buffer to zero in sev_ioctl_do_platform_status.
-
CVE-2022-50214
In the Linux kernel, the following vulnerability has been resolved: coresight: Clear the connection field properly coresight devices track their connections (output connections) and hold a reference to the fwnode. When a device goes away, we walk through the devices on the coresight bus and make sure that the references are dropped. This happens both ways: a) For all output connections from the device, drop the reference to the target device via coresight_release_platform_data() b) Iterate over all the devices on the coresight bus and drop the reference to fwnode if *this* device is the target of the output connection, via coresight_remove_conns()->coresight_remove_match(). However, the coresight_remove_match() doesn't clear the fwnode field, after dropping the reference, this causes use-after-free and additional refcount drops on the fwnode. e.g., if we have two devices, A and B, with a connection, A -> B. If we remove B first, B would clear the reference on B, from A via coresight_remove_match(). But when A is removed, it still has a connection with fwnode still pointing to B. Thus it tries to drops the reference in coresight_release_platform_data(), raising the bells like : [ 91.990153] ------------[ cut here ]------------ [ 91.990163] refcount_t: addition on 0; use-after-free. [ 91.990212] WARNING: CPU: 0 PID: 461 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x144 [ 91.990260] Modules linked in: coresight_funnel coresight_replicator coresight_etm4x(-) crct10dif_ce coresight ip_tables x_tables ipv6 [last unloaded: coresight_cpu_debug] [ 91.990398] CPU: 0 PID: 461 Comm: rmmod Tainted: G W T 5.19.0-rc2+ #53 [ 91.990418] Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 [ 91.990434] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 91.990454] pc : refcount_warn_saturate+0xa0/0x144 [ 91.990476] lr : refcount_warn_saturate+0xa0/0x144 [ 91.990496] sp : ffff80000c843640 [ 91.990509] x29: ffff80000c843640 x28: ffff800009957c28 x27: ffff80000c8439a8 [ 91.990560] x26: ffff00097eff1990 x25: ffff8000092b6ad8 x24: ffff00097eff19a8 [ 91.990610] x23: ffff80000c8439a8 x22: 0000000000000000 x21: ffff80000c8439c2 [ 91.990659] x20: 0000000000000000 x19: ffff00097eff1a10 x18: ffff80000ab99c40 [ 91.990708] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80000abf6fa0 [ 91.990756] x14: 000000000000001d x13: 0a2e656572662d72 x12: 657466612d657375 [ 91.990805] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffff8000081aba28 [ 91.990854] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 746e756f63666572 [ 91.990903] x5 : ffff00097648ec58 x4 : 0000000000000000 x3 : 0000000000000027 [ 91.990952] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00080260ba00 [ 91.991000] Call trace: [ 91.991012] refcount_warn_saturate+0xa0/0x144 [ 91.991034] kobject_get+0xac/0xb0 [ 91.991055] of_node_get+0x2c/0x40 [ 91.991076] of_fwnode_get+0x40/0x60 [ 91.991094] fwnode_handle_get+0x3c/0x60 [ 91.991116] fwnode_get_nth_parent+0xf4/0x110 [ 91.991137] fwnode_full_name_string+0x48/0xc0 [ 91.991158] device_node_string+0x41c/0x530 [ 91.991178] pointer+0x320/0x3ec [ 91.991198] vsnprintf+0x23c/0x750 [ 91.991217] vprintk_store+0x104/0x4b0 [ 91.991238] vprintk_emit+0x8c/0x360 [ 91.991257] vprintk_default+0x44/0x50 [ 91.991276] vprintk+0xcc/0xf0 [ 91.991295] _printk+0x68/0x90 [ 91.991315] of_node_release+0x13c/0x14c [ 91.991334] kobject_put+0x98/0x114 [ 91.991354] of_node_put+0x24/0x34 [ 91.991372] of_fwnode_put+0x40/0x5c [ 91.991390] fwnode_handle_put+0x38/0x50 [ 91.991411] coresight_release_platform_data+0x74/0xb0 [coresight] [ 91.991472] coresight_unregister+0x64/0xcc [coresight] [ 91.991525] etm4_remove_dev+0x64/0x78 [coresight_etm4x] [ 91.991563] etm4_remove_amba+0x1c/0x2c [coresight_etm4x] [ 91.991598] amba_remove+0x3c/0x19c ---truncated---
-
CVE-2022-49934
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix UAF in ieee80211_scan_rx() ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done().
-
CVE-2025-46714
Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. Starting in version 1.3.0 and prior to 1.15.12, API_GET_SECURE_PARAM has an arithmetic overflow leading to a small memory allocation and then a extremely large copy into the small allocation. Version 1.15.12 fixes the issue.
-
CVE-2025-37891
In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: Fix buffer overflow at UMP SysEx message conversion The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message.
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.