Wolfssl CVEs.

Missing hash/digest size and OID checks allow digests smaller than allowed when verifying ECDSA certificates, or smaller than is appropriate for the relevant key type, to be accepted by signature verification functions. This could lead to reduced security of ECDSA certificate-based authentication if the public CA key used is also known. This affects ECDSA/ECC verification when EdDSA or ML-DSA is also enabled.

Crypto Wolfssl

Heap buffer overread in wc_PKCS7_DecodeEnvelopedData when parsing crafted PKCS7 EnvelopedData. This could theoretically be triggered by attacker-supplied data delivered via S/MIME or CMS.

Memory safety Web app Wolfssl

In TLSX_EchChangeSNI, the ctx->extensions branch set extensions unconditionally even when TLSX_Find returned NULL. This caused TLSX_UseSNI to attach the attacker-controlled publicName to the shared WOLFSSL_CTX when no inner SNI was configured. TLSX_EchRestoreSNI then failed to clean it up because its removal was gated on serverNameX != NULL. The inner ClientHello was sized before the pollution but written after it, causing TLSX_SNI_Write to memcpy 255 bytes past the allocation boundary.

Memory safety Wolfssl

Heap Overflow in TLS 1.3 ECH parsing. An integer underflow existed in ECH extension parsing logic when calculating a buffer length, which resulted in writing beyond the bounds of an allocated buffer. Note that in wolfSSL, ECH is off by default, and the ECH standard is still evolving.

Memory safety Wolfssl

A heap buffer overflow could occur in the DTLS 1.3 ACK serialization path before the connecting peer is authenticated. The buffer overflow was due to an integer truncation when computing the length of the ACK record-number list, causing an undersized buffer to be allocated and then overrun. This affects builds using DTLS 1.3 and wolfSSL version 5.9.0 and earlier. A fix was added to the 5.9.1 release.

Memory safety Wolfssl

Two buffer overflow vulnerabilities existed in the wolfSSL CRL parser when parsing CRL numbers: a heap-based buffer overflow could occur when improperly storing the CRL number as a hexadecimal string, and a stack-based overflow for sufficiently sized CRL numbers. With appropriately crafted CRLs, either of these out of bound writes could be triggered. Note this only affects builds that specifically enable CRL support, and the user would need to load a CRL from an untrusted source.

Memory safety Library Wolfssl

Use-after-free in PQC hybrid key-share handling. This is an incomplete-fix follow-up to CVE-2026-5460 (released in 5.9.1): a malicious TLS 1.3 server sending a truncated PQC hybrid KeyShare can still trigger the error cleanup path to operate on freed memory.

Memory safety Server Wolfssl

wolfSSL's wc_PKCS7_DecodeAuthEnvelopedData() does not properly sanitize the AES-GCM authentication tag length received and has no lower bounds check. A man-in-the-middle can therefore truncate the mac field from 16 bytes to 1 byte, reducing the tag check from 2⁻¹²⁸ to 2⁻⁸.

Other Wolfssl

Stack Buffer Overflow in wc_HpkeLabeledExtract via Oversized ECH Config. A vulnerability existed in wolfSSL 5.8.4 ECH (Encrypted Client Hello) support, where a maliciously crafted ECH config could cause a stack buffer overflow on the client side, leading to potential remote execution and client program crash. This could be exploited by a malicious TLS server supporting ECH. Note that ECH is off by default, and is only enabled with enable-ech.

Memory safety Server Wolfssl

In the OpenSSL compatibility layer implementation, the function RAND_poll() was not behaving as expected and leading to the potential for predictable values returned from RAND_bytes() after fork() is called. This can lead to weak or predictable random numbers generated in applications that are both using RAND_bytes() and doing fork() operations. This only affects applications explicitly calling RAND_bytes() after fork() and does not affect any internal TLS operations. Although RAND_bytes() documentation in OpenSSL calls out not being safe for use with fork() without first calling RAND_poll(), an additional code change was also made in wolfSSL to make RAND_bytes() behave similar to OpenSSL after a fork() call without calling RAND_poll(). Now the Hash-DRBG used gets reseeded after detecting running in a new process. If making use of RAND_bytes() and calling fork() we recommend updating to the latest version of wolfSSL. Thanks to Per Allansson from Appgate for the report.

Wolfssl

Improper input validation in the TLS 1.3 KeyShareEntry parsing in wolfSSL v5.8.2 on multiple platforms allows a remote unauthenticated attacker to cause a denial-of-service by sending a crafted ClientHello message containing duplicate KeyShareEntry values for the same supported group, leading to excessive CPU and memory consumption during ClientHello processing.

Other Wolfssl

The X25519 x86_64 assembly implementation fails to clear the most significant bit during the final modular reduction, so the computed result may not be fully reduced modulo the field prime 2^255 - 19. This can leave the field element in a non-canonical form, producing an incorrect result from the scalar multiplication and potentially a wrong shared secret. The final carry-propagation chains in the x64 and AVX2 reduction routines could overflow into the top bit, and the high limb was not masked afterward, so the 255-bit field element was left non-canonical.

Crypto Wolfssl

Improper Input Validation in the TLS 1.3 CKS extension parsing in wolfSSL 5.8.2 and earlier on multiple platforms allows a remote unauthenticated attacker to potentially cause a denial-of-service via a crafted ClientHello message with duplicate CKS extensions.

Other Wolfssl

Heap buffer overflow in DTLS 1.3 ACK message processing. A remote attacker can send a crafted DTLS 1.3 ACK message that triggers a heap buffer overflow.

Memory safety Wolfssl

Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

Memory safety Device Wolfssl

When HAVE_ENCRYPT_THEN_MAC is configured, the implementation could fall back to MAC-then-Encrypt rather than enforcing Encrypt-then-MAC.

Crypto Wolfssl

An integer overflow existed in the wolfCrypt CMAC implementation, that could be exploited to forge CMAC tags. The function wc_CmacUpdate used the guard `if (cmac->totalSz != 0)` to skip XOR-chaining on the first block (where digest is all-zeros and the XOR is a no-op). However, totalSz is word32 and wraps to zero after 2^28 block flushes (4 GiB), causing the guard to erroneously discard the live CBC-MAC chain state. Any two messages sharing a common suffix beyond the 4 GiB mark then produce identical CMAC tags, enabling a zero-work prefix-substitution forgery. The fix removes the guard, making the XOR unconditional; the no-op property on the first block is preserved because digest is zero-initialized by wc_InitCmac_ex.

Memory safety Wolfssl

The PKCS#7 decode path ignores the caller-supplied output buffer size (outputSz), allowing decoded content to be written past the bounds of the provided buffer. This affects wolfSSL 5.9.0 and earlier and was fixed in the 5.9.1 release.

Memory safety Wolfssl

Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch.

Auth & access Wolfssl

Heap-based buffer overflow in the KCAPI ECC code path of wc_ecc_import_x963_ex() in wolfSSL wolfcrypt allows a remote attacker to write attacker-controlled data past the bounds of the pubkey_raw buffer via a crafted oversized EC public key point. The WOLFSSL_KCAPI_ECC code path copies the input to key->pubkey_raw (132 bytes) using XMEMCPY without a bounds check, unlike the ATECC code path which includes a length validation. This can be triggered during TLS key exchange when a malicious peer sends a crafted ECPoint in ServerKeyExchange.

Memory safety Wolfssl

Heap buffer overflow in CertFromX509 via AuthorityKeyIdentifier size confusion. A heap buffer overflow occurs when converting an X.509 certificate internally due to incorrect size handling of the AuthorityKeyIdentifier extension.

Memory safety Wolfssl

Integer Underflow Leads to Out-of-Bounds Access in XChaCha20-Poly1305 Decrypt. This issue is hit specifically with a call to the function wc_XChaCha20Poly1305_Decrypt() which is not used with TLS connections, only from direct calls from an application.

Memory safety Wolfssl

A CRL critical extension bypass exists in ParseCRL_Extensions where critical extensions are not properly enforced, allowing a crafted CRL with an unhandled critical extension to be accepted. This only affects builds with CRL support enabled and where a crafted CRL had a trusted signature when parsed.

Crypto Wolfssl

Integer underflow in wc_PKCS7_DecryptOri when handling crafted Other Recipient Info, leading to incorrect length handling during decryption.

Crypto Wolfssl

In wolfSSL, ARIA-GCM cipher suites used in TLS 1.2 and DTLS 1.2 reuse an identical 12-byte GCM nonce for every application-data record. Because wc_AriaEncrypt is stateless and passes the caller-supplied IV verbatim to the MagicCrypto SDK with no internal counter, and because the explicit IV is zero-initialized at session setup and never incremented in non-FIPS builds. This vulnerability affects wolfSSL builds configured with --enable-aria and the proprietary MagicCrypto SDK (a non-default, opt-in configuration required for Korean regulatory deployments). AES-GCM is not affected because wc_AesGcmEncrypt_ex maintains an internal invocation counter independently of the call-site guard.

Other Library Wolfssl

wolfSSL_X509_verify_cert in the OpenSSL compatibility layer accepts a certificate chain in which the leaf's signature is not checked, if the attacker supplies an untrusted intermediate with Basic Constraints `CA:FALSE` that is legitimately signed by a trusted root. An attacker who obtains any leaf certificate from a trusted CA (e.g. a free DV cert from Let's Encrypt) can forge a certificate for any subject name with any public key and arbitrary signature bytes, and the function returns `WOLFSSL_SUCCESS` / `X509_V_OK`. The native wolfSSL TLS handshake path (`ProcessPeerCerts`) is not susceptible and the issue is limited to applications using the OpenSSL compatibility API directly, which would include integrations of wolfSSL into nginx and haproxy.

Crypto Server Wolfssl

Vulnerability in X25519 constant-time cryptographic implementations due to timing side channels introduced by compiler optimizations and CPU architecture limitations, specifically with the Xtensa-based ESP32 chips. If targeting Xtensa it is recommended to use the low memory implementations of X25519, which is now turned on as the default for Xtensa.

Other Wolfssl

X.509 date buffer overflow in wolfSSL_X509_notAfter / wolfSSL_X509_notBefore. A buffer overflow may occur when parsing date fields from a crafted X.509 certificate via the compatibility layer API. This is only triggered when calling these two APIs directly from an application, and does not affect TLS or certificate verify operations in wolfSSL.

Memory safety Wolfssl

Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all).

Memory safety Wolfssl

Out-of-bounds read in ALPN parsing due to incomplete validation. wolfSSL 5.8.4 and earlier contained an out-of-bounds read in ALPN handling when built with ALPN enabled (HAVE_ALPN / --enable-alpn). A crafted ALPN protocol list could trigger an out-of-bounds read, leading to a potential process crash (denial of service). Note that ALPN is disabled by default, but is enabled for these 3rd party compatibility features: enable-apachehttpd, enable-bind, enable-curl, enable-haproxy, enable-hitch, enable-lighty, enable-jni, enable-nginx, enable-quic.

Memory safety Server Wolfssl

Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer.

Memory safety Wolfssl

iPAddress name constraints bypass when WOLFSSL_IP_ALT_NAME is not defined. IP address name constraints are not enforced in that configuration, allowing a certificate to bypass an issuing CA's IP address constraints.

Crypto Wolfssl

Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer.

Memory safety Wolfssl

wolfSSL 5.8.4 on RISC-V RV32I architectures lacks a constant-time software implementation for 64-bit multiplication. The compiler-inserted __muldi3 subroutine executes in variable time based on operand values. This affects multiple SP math functions (sp_256_mul_9, sp_256_sqr_9, etc.), leading to a timing side-channel that may expose sensitive cryptographic data.

Other Wolfssl

The server previously verified the TLS 1.3 PSK binder using a non-constant time method which could potentially leak information about the PSK binder

Other Server Wolfssl

wolfSSL's AVX2-optimized ML-KEM implementation (mlkem_cmp_avx2) compares only 1536 of the 1568 ciphertext bytes during the Fujisaki-Okamoto re-encryption check in ML-KEM-1024 decapsulation. Ciphertexts that differ from the expected re-encryption solely in bytes 1536-1567 bypass implicit rejection and are accepted as valid, breaking IND-CCA2 security. An attacker able to submit chosen ciphertexts to a decapsulation oracle that uses a static ML-KEM-1024 key, and to observe whether the genuine shared secret or the implicit-rejection secret was produced, can use this as a plaintext-checking oracle to recover the private key. A proof of concept recovered a full ML-KEM-1024 private key with approximately 98% success using roughly 350 chosen ciphertexts. The flaw is a deterministic logic error and does not rely on timing measurements.

Crypto Wolfssl

Integer underflow in wolfSSL packet sniffer <= 5.8.4 allows an attacker to cause a buffer overflow in the AEAD decryption path by injecting a TLS record shorter than the explicit IV plus authentication tag into traffic inspected by ssl_DecodePacket. The underflow wraps a 16-bit length to a large value that is passed to AEAD decryption routines, causing heap buffer overflow and a crash. An unauthenticated attacker can trigger this remotely via malformed TLS Application Data records.

Memory safety Wolfssl

PKCS7_verify signer confusion allows forged signatures, where the signer associated with a signature is not correctly bound, permitting a forged signature to be accepted.

Crypto Wolfssl

Bleichenbacher padding oracle in PKCS#7 KTRI decryption. When decrypting PKCS#7 EnvelopedData using RSA PKCS#1 v1.5 key transport, wolfSSL returned distinguishable error codes depending on whether RSA padding validation failed versus whether the decrypted content was malformed. An attacker able to submit crafted EnvelopedData messages and observe error responses could use this as a padding oracle to incrementally recover the encrypted Content Encryption Key (CEK). The fix generates a deterministic pseudo-random fake CEK on padding failure (via HMAC-SHA256) and proceeds with decryption identically, using constant-time operations throughout, so that all failure paths produce the same error regardless of padding validity.

Other Wolfssl

MatchTrustedPeer ignores the public key used, leading to forged CA clones passing verification. Affected builds are any that enable the macro WOLFSSL_TRUST_PEER_CERT and load CA certificates with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert(). The peer must know the certificates being loaded to either of those APIs to take advantage of the issue. When OPENSSL_COMPATIBLE_DEFAULTS is also defined this widens the affected API to include all CA certificate loading. Both macros are defined when using autoconf builds such as (nginx, haproxy, stunnel, wpas, apache httpd, hitch, bind, rsyslog, ffmpeg, all, distro). When the certificate is listed as a trusted peer certificate the issue previously allowed for a malicious (D)TLS server to bypass authentication once knowing which CA’s the client would accept. This also affects mutual authentication cases where the client knows which CA’s the server has loaded. If building with any of these configurations and using (D)TLS where the loaded CA’s could be known and authentication of the peer is desired, users should either: update to the latest wolfSSL version, apply the fix patch, or use the configure flag --disable-openssl-compatible-defaults and not load CA’s with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert() to mitigate the issue.

Crypto Server Wolfssl

TLS 1.3 post-handshake authentication (PHA) issue where a server could accept a client's Finished message without the client having sent a Certificate and CertificateVerify. The post-handshake-auth exemption that allows an empty/absent peer certificate was only intended for the initial handshake, but it was also being applied while a post-handshake CertificateRequest was still outstanding. The check is now scoped to the initial handshake only: on the server, once a post-handshake CertificateRequest has been sent (certReqCtx is set), a peer certificate and a valid CertificateVerify are required again before the Finished is accepted, with empty-certificate handling following the configured verify mode (FAIL_IF_NO_PEER_CERT) just as during first-handshake client authentication. Only affects TLS 1.3 servers built with post-handshake authentication support (WOLFSSL_POST_HANDSHAKE_AUTH / --enable-postauth, included in --enable-all) that enable WOLFSSL_VERIFY_POST_HANDSHAKE and request a client certificate after the handshake via wolfSSL_request_certificate(). Clients, and servers that do not use post-handshake authentication, are unaffected.

Auth & access Server Wolfssl

X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are.

Crypto Library Wolfssl

X.509 trust-chain bypass in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra (OPENSSL_EXTRA) and whose application validates certificates by calling X509_verify_cert() with caller-supplied untrusted intermediate certificates; for those users it is critical, otherwise the library is unaffected. In particular, native wolfSSL TLS/DTLS usage is not impacted. wolfSSL's X509_verify_cert() temporarily loads each caller-supplied untrusted intermediate into the certificate manager but failed to drop them before the trusted-store check, so an untrusted intermediate could anchor the path itself. An attacker can present a chain that never reaches a configured trust anchor and have it accepted, resulting in acceptance of an attacker-controlled certificate. This is certificate verification independent of TLS (e.g. S/MIME/CMS, code/firmware signing, JWT/JWS x5c), is not specific to any key type or algorithm, and a single untrusted intermediate suffices. The default wolfSSL TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only TLS applications doing manual or deferred peer verification through this API are, which also requires --enable-sessioncerts.

Crypto Device Wolfssl

Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

Crypto Server Wolfssl

A 1-byte stack buffer over-read was identified in the MatchDomainName function (src/internal.c) during wildcard hostname validation when the LEFT_MOST_WILDCARD_ONLY flag is active. If a wildcard * exhausts the entire hostname string, the function reads one byte past the buffer without a bounds check, which could cause a crash.

Denial of service Wolfssl

With TLS 1.3 pre-shared key (PSK) a malicious or faulty server could ignore the request for PFS (perfect forward secrecy) and the client would continue on with the connection using PSK without PFS. This happened when a server responded to a ClientHello containing psk_dhe_ke without a key_share extension. The re-use of an authenticated PSK connection that on the clients side unexpectedly did not have PFS, reduces the security of the connection.

Crypto Server Wolfssl

Integer underflow in wolfSSL packet sniffer <= 5.9.0 allows an attacker to cause a program crash in the AEAD decryption path by injecting a TLS record shorter than the explicit IV plus authentication tag into traffic inspected by ssl_DecodePacket. The underflow wraps a 16-bit length to a large value that is passed to AEAD decryption routines, causing a large out-of-bounds read and crash. An unauthenticated attacker can trigger this remotely via malformed TLS Application Data records.

Memory safety Wolfssl

Missing required cryptographic step in the TLS 1.3 client HelloRetryRequest handshake logic in wolfSSL could lead to a compromise in the confidentiality of TLS-protected communications via a crafted HelloRetryRequest followed by a ServerHello message that omits the required key_share extension, resulting in derivation of predictable traffic secrets from (EC)DHE shared secret. This issue does not affect the client's authentication of the server during TLS handshakes.

Other Server Wolfssl

In wolfSSL release 5.8.2 blinding support is turned on by default for Curve25519 in applicable builds. The blinding configure option is only for the base C implementation of Curve25519. It is not needed, or available with; ARM assembly builds, Intel assembly builds, and the small Curve25519 feature. While the side-channel attack on extracting a private key would be very difficult to execute in practice, enabling blinding provides an additional layer of protection for devices that may be more susceptible to physical access or side-channel observation.

Wolfssl

PKCS#12 MAC verification uses an attacker-controlled comparison length, weakening the integrity check on the MAC and allowing a mismatched MAC to be accepted. The PKCS#12 verify path compared the locally computed HMAC against the MAC parsed from the PKCS#12 structure using a length taken directly from the attacker-supplied input, without first verifying that it equals the length of the digest actually produced by the configured algorithm. A truncated or zero-length stored MAC could therefore be accepted, defeating the integrity protection of the MAC.

Crypto Wolfssl