CVE-20XX-?
agent?

Just published.

The newest CVEs, straight from CVE.org and NVD.

409,018 CVEs · updated 2026-11-19 16:19 UTC

Reset all
  1. CVE-2026-107414

    Memory overflow in WebAuth authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  2. CVE-2026-107411

    Memory overflow in RTSP ALG can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  3. CVE-2026-107412

    Multiple Memory overflow vulnerabilities can lead to unpredictable or erroneous behavior and Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety

    9.5 CRITICAL 0.3% exploit odds No fix listed
  4. CVE-2026-107413

    Memory overflow in SAML authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway.

    Memory safety Network gear

    8.7 HIGH 0.3% exploit odds No fix listed
  5. CVE-2026-16662

    boot_save_boot_status() in boot/bootutil/src/boot_record.c reads the image's EXPECTED_HASH_TLV into a stack buffer image_hash[IMAGE_HASH_SIZE] that is never zero-initialised. The TLV handler validates only the upper bound (len > sizeof(image_hash)) and then reads exactly len bytes, so a TLV shorter than IMAGE_HASH_SIZE leaves the tail of image_hash holding stale stack content. The subsequent copy into the boot record, memcpy(buf + offset, image_hash, sizeof(image_hash)), uses the fixed buffer size rather than len, so up to IMAGE_HASH_SIZE - 1 bytes of uninitialised bootloader stack are written into the measured-boot record. The defect is reachable only under MCUBOOT_MEASURED_BOOT, and only when nothing has checked the length of the hash TLV before boot_save_boot_status() reads it. bootutil_img_validate() rejects a hash TLV whose length is not exactly sizeof(hash) (boot/bootutil/src/image_validate.c:345), and primary-slot validation is on by default (Zephyr's CONFIG_BOOT_VALIDATE_SLOT0 defaults to y), so in a default build the malformed image never reaches this code. Two kinds of build let a short TLV through: Builds that use pure signatures (MCUBOOT_SIGN_PURE, Zephyr CONFIG_BOOT_SIGNATURE_TYPE_PURE). The signature covers the image itself, so the hash-TLV check in bootutil_img_validate() is compiled out, and a pure-signed image normally carries no hash TLV. A hash TLV is still allowed in the unprotected TLV area, which the signature does not cover, so a short one can be added to a correctly signed image without invalidating it. This applies with every upgrade strategy, including direct-XIP and RAM-load, and the modified image can be delivered through any path that accepts a signed image. Builds with primary-slot validation turned off: the swap and overwrite loader built without MCUBOOT_VALIDATE_PRIMARY_SLOT, which checks only the image magic before calling boot_add_shared_data(), and the Zephyr single-slot loader (boot/zephyr/single_loader.c) built without it, including the MCUBOOT_VALIDATE_PRIMARY_SLOT_ONCE variant, which skips validation once the trailer records an earlier successful one. Placing the crafted image requires physical or flash-write access to the device; in a single-slot build with serial recovery enabled, the serial-recovery upload writes the primary slot directly and can place it as well. Outside pure-signature builds, the direct-XIP and RAM-load strategies in boot/bootutil/src/loader.c validate the selected slot unconditionally and are not affected. It is also reachable through a time-of-check/time-of-use change to tamperable external flash between validation and the boot-record read. In these configurations the boot record's measurement is already not trustworthy: the hash copied into the record is the image's own EXPECTED_HASH_TLV, which nothing has verified and which the attacker chooses. The defect therefore does not weaken attestation integrity any further. What it adds is a path for bootloader memory to leave the device: up to 63 bytes (IMAGE_HASH_SIZE - 1) of uninitialised bootloader stack are embedded in the measurement field that a downstream attestation service sends to a remote verifier. In the configurations analysed the residue is bootloader internal state (TLV offsets and lengths, flash addresses, loop state), not key material, but what occupies that stack region depends on configuration and on which code ran before boot_save_boot_status(). It is reported as a low-severity, defense-in-depth disclosure with no integrity or availability impact. This is distinct from the already-fixed record_len integer underflow in the same routine (GHSA-8hrv-4cp5-4rg3). The fix rejects any EXPECTED_HASH_TLV whose length is not exactly IMAGE_HASH_SIZE.

    Memory safety OS & kernel

    2.4 LOW 0.1% exploit odds Fix listed
  6. CVE-2026-16664

    MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read. The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices). flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth. This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below.

    Memory safety Device

    5.1 MEDIUM 0.1% exploit odds Fix listed
  7. CVE-2026-16671

    split_image_check() in boot/bootutil/src/loader.c declares a fixed uint8_t loader_hash[32] buffer and passes it as the out_hash out-parameter to bootutil_img_validate(). That routine copies IMAGE_HASH_SIZE bytes into out_hash (memcpy(out_hash, hash, IMAGE_HASH_SIZE) in boot/bootutil/src/image_validate.c), where IMAGE_HASH_SIZE is a compile-time constant of 64 for MCUBOOT_SHA512 or 48 for MCUBOOT_SIGN_EC384/SHA-384 (boot/bootutil/include/bootutil/crypto/sha.h). The buffer tracks SHA-256 (32 bytes) while the copy length tracks the configured algorithm, so the write overruns the buffer by 16 or 32 bytes. The overflow is only present in a non-default configuration: the legacy Mynewt split-image feature must be compiled (split_go()/split_image_check(), i.e. neither MCUBOOT_DIRECT_XIP nor MCUBOOT_RAM_LOAD), the digest must be larger than 32 bytes (MCUBOOT_SHA512 or MCUBOOT_SIGN_EC384), and MCUBOOT_SIGN_PURE must be off. split_go() is a public API with no caller inside MCUboot; it is invoked from a Mynewt application. In the default SHA-256 build there is no overflow. The over-written bytes are the one-way digest of the loader image and the overflow length is fixed at build time, so the contents are not meaningfully attacker-controlled and the size is not attacker-chosen. The realistic impact is bounded, uncontrolled corruption of the bootloader's stack on the split-boot path, manifesting as instability or failed boot in the affected configuration rather than reliable code execution. The fix is to size loader_hash to IMAGE_HASH_SIZE and pass IMAGE_HASH_SIZE as the matching seed length.

    Memory safety

    2.9 LOW 0.1% exploit odds Fix listed
  8. CVE-2026-127928

    In MCUboot's serial-recovery encrypted-image support (boot/boot_serial/src/boot_serial_encryption.c), decrypt_image_inplace() and boot_image_validate_encrypted() each keep a stack-local struct boot_status. boot_enc_load() writes the plaintext per-image AES key into its enckey[] field. Neither function cleared this structure before returning. In addition, a decrypt failure inside the per-sector loop of decrypt_image_inplace() returned early and skipped the total_out: cleanup, which left the expanded AES key context (enc_data) on the stack as well. The error paths of boot_image_validate_encrypted() similarly skipped boot_enc_zeroize(). The affected code is built when encrypted images (MCUBOOT_ENC_IMAGES, Zephyr CONFIG_BOOT_ENCRYPT_IMAGE) are combined with serial recovery. It runs when an encrypted image is uploaded to the primary slot over the recovery protocol, and when the image list or state is queried while an encrypted image is in the secondary slot. After these functions return, the image's AES content key remains in dead stack memory. An attacker who can later read device RAM, for example through a debug port or retained RAM, can recover it. This weakens the confidentiality of image-encryption keys within the bootloader trust boundary. A recovered key exposes the plaintext of the encrypted firmware image it protects. The device's long-term private decryption key is not exposed. No remote or recovery-protocol channel that returns this memory is known, so exploitation requires a separate memory-read capability.

    Other Device

    2.0 LOW 0.1% exploit odds Fix listed
  9. CVE-2026-128091

    When MCUboot is built with the TinyCrypt crypto backend (MCUBOOT_USE_TINYCRYPT), bootutil_aes_ctr_drop() in boot/bootutil/include/bootutil/crypto/aes_ctr_tinycrypt.h was an empty stub. The AES-CTR context for this backend is the fully expanded AES-128 key schedule (struct tc_aes_key_sched_struct). Generic code relies on this hook to release and clear key state, so with TinyCrypt nothing was cleared. The mbedTLS and PSA backends do free or destroy their key state here. As a result, boot_state_clear(), which boot_go() calls before handing off to the application, left the image's AES content-encryption key schedule in the static boot_data state. This is the case after an encrypted upgrade in single-image builds, where boot_enc_zeroize() is not called. boot_decrypt_key() likewise left the ECIES-derived key-encryption key schedule on the stack. The affected build uses MCUBOOT_ENC_IMAGES with TinyCrypt, which is the default ECDSA and Ed25519 backend in the Zephyr port. The first AES-128 round key equals the cipher key, so anyone who can read the leftover bootloader RAM after boot can recover the image content key and decrypt that encrypted image. That includes a physical attacker with debug or RAM access, or code later running on the device. This weakens image-encryption key confidentiality (and so the confidentiality of the encrypted image's plaintext). The device's long-term private decryption key is not exposed, and image authenticity is not affected. The fix wipes the context with bootutil_wipe_memory().

    Crypto Device

    2.0 LOW 0.1% exploit odds Fix listed
  10. CVE-2026-128321

    Tight JPEG decoding in TightVNC and UltraVNC viewers contains a heap-based buffer overflow because an attacker-controlled framebuffer rectangle width is not validated against a fixed-size decoding buffer. A malicious VNC server can cause an out-of-bounds heap write when a user connects, resulting in application crash and potentially other memory-corruption impacts.

    Memory safety Server

    7.8 HIGH 0.2% exploit odds No fix listed
  11. CVE-2026-16659

    MCUboot's serial-recovery image-upload handler bs_upload() in boot/boot_serial/src/boot_serial.c declares const struct flash_area *fap = NULL and assigns it only via flash_area_open() part-way through the function. Two early validation failures (goto out_invalid_data) — a CBOR map that fails to decode, or an upload packet missing the off/data members — branch past the open while fap is still NULL, then fall into the shared epilogue. In MCUBOOT_ENC_IMAGES builds that epilogue unconditionally calls boot_handle_enc_fw(fap), which reaches boot_image_load_header() and flash_area_read() and dereferences the NULL flash_area. The defect is reachable pre-authentication: the trigger is the very first serial-recovery upload command carrying a malformed payload. The guarding conditions are default-true on a fresh recovery session — img_num, curr_off and img_size are zero-initialized statics, so curr_off == img_size and the primary-slot test both hold. It requires a non-default build: encrypted images (MCUBOOT_ENC_IMAGES / Zephyr CONFIG_BOOT_ENCRYPT_IMAGE) together with an active serial-recovery transport, on the Zephyr or Mynewt port (the two that build both boot/boot_serial/src/boot_serial.c and boot_serial_encryption.c with MCUBOOT_ENC_IMAGES). The impact is a transient denial of service of the bootloader during recovery. fap is a hard NULL rather than an attacker-controlled value, so there is no memory-corruption or information-leak primitive and image authentication is unaffected. Whether the dereference faults is platform-dependent — on targets where address 0x0 is mapped readable flash the read merely returns an error and execution continues, while targets that trap NULL (MPU / null-pointer-exception detection) take a hard fault. Because serial recovery is unauthenticated by design and already permits the console attacker to write the secondary slot, the added capability is only a low-value transient crash. The related unconditional flash_area_close(fap) call in the same epilogue is a safe no-op on the ports that reach it, so it does not contribute to the dereference. The affected ports are the Zephyr port — boot/zephyr/CMakeLists.txt compiles boot_serial.c under CONFIG_MCUBOOT_SERIAL and boot_serial_encryption.c under CONFIG_BOOT_ENCRYPT_IMAGE — and the Mynewt port, whose mcuboot_config.h defines MCUBOOT_SERIAL unconditionally and MCUBOOT_ENC_IMAGES under any BOOTUTIL_ENCRYPT_ syscfg, with boot/boot_serial/pkg.yml declaring no explicit source list so the whole directory is built. The Espressif port is not affected**: it compiles boot_serial.c but not boot_serial_encryption.c, and defines no MCUBOOT_ENC_IMAGES, so the #ifdef MCUBOOT_ENC_IMAGES block containing the call is preprocessed away. The NuttX, Cypress and Mbed ports do not build boot_serial.c at all.

    Memory safety Device

    4.0 MEDIUM 0.1% exploit odds Fix listed
  12. CVE-2026-15465

    Software installed and run as a non-privileged user may conduct improper GPU system calls through the DDK kernel module interface. Under unsupported use of the interface, a use-after-free condition may occur that can lead to kernel memory corruption, platform instability, or system reboot. The weakness occurs when software references memory after it has been released. Accessing memory after free may result in corruption of valid data structures, unexpected program behaviour, process crashes, or execution of unintended operations.

    Memory safety Device

    7.8 HIGH 0.1% exploit odds No fix listed
  13. CVE-2026-127915

    The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it. The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying. The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.

    Memory safety Device

    2.0 LOW 0.1% exploit odds Fix listed
  14. CVE-2026-127916

    bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed. The callers bound part of the span, or none of it: On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB. Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span. The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well. The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication. Whether a malformed header produces an actual read beyond the area depends on the flash backend: Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read. With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check. The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy(). The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting. The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller.

    Memory safety Device

    2.9 LOW 0.1% exploit odds Fix listed
  15. CVE-2026-127281

    A vulnerability was found in lanyulei ferry 1.0.0-beta.1/1.0.0. Affected is an unknown function of the file middleware/auth.go of the component JWT Validation. The manipulation results in improper authentication. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Auth & access Web app

    5.5 MEDIUM 0.4% exploit odds No fix listed
  16. CVE-2026-127282

    A vulnerability was determined in SourceCodester Smart Attendance System with QR Code Scanner 1.0. Affected by this vulnerability is an unknown functionality of the file reset_password.php. This manipulation of the argument Username causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

    XSS Web app

    2.1 LOW 0.3% exploit odds No fix listed
  17. CVE-2026-127283

    A vulnerability was identified in SourceCodester Food Ordering System 1.0. Affected by this issue is some unknown functionality of the file admin/update_food.php of the component Admin Image Handler. Such manipulation of the argument cmd leads to unrestricted upload. The attack may be performed from remote. The exploit is publicly available and might be used.

    Code execution Web app

    5.5 MEDIUM 0.3% exploit odds No fix listed
  18. CVE-2026-127284

    A security flaw has been discovered in SourceCodester Food Ordering System 1.0. This affects an unknown part of the file admin/add_category.php of the component Admin Write Handler. Performing a manipulation of the argument title/description/price/current_image/featured/active/id results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

    Injection Web app

    5.5 MEDIUM 0.3% exploit odds No fix listed
  19. CVE-2026-127276

    A vulnerability was identified in Linksys EA8100 1.0.3.216940. Impacted is an unknown function of the component Web UI. Such manipulation leads to cookie without 'httponly' flag. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitability is considered difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    2.9 LOW 0.5% exploit odds No fix listed
  20. CVE-2026-127277

    A security flaw has been discovered in Linksys EA8100 1.0.3.216940. The affected element is an unknown function of the file etc/init.d/service_smbd.sh of the component SMB Service. Performing a manipulation of the argument ANON_ACCESS results in improper initialization. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

    Other Network gear

    9.3 CRITICAL 0.6% exploit odds No fix listed
  21. CVE-2026-127278

    A weakness has been identified in AIP-PUB ACPs-community up to 2.2.0. The impacted element is the function send_verification_code of the file registry-server/app/account/service_auth.py of the component verify-code Endpoint. Executing a manipulation of the argument phone can lead to improper authentication. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The reported GitHub issue was closed with the reason "completed". However, it was not possible to determine the PR or commit which could have fixed this issue.

    Auth & access Web app

    5.5 MEDIUM 0.4% exploit odds No fix listed
  22. CVE-2026-127279

    A vulnerability was detected in AIP-PUB ACPs-community up to 2.2.0. This impacts an unknown function of the file discovery-server/app/main.py of the component Discovery Server. The manipulation results in missing authentication. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure.

    Auth & access Server

    5.5 MEDIUM 0.4% exploit odds No fix listed
  23. CVE-2026-107407

    Memory overflow in SMPP traffic can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Network gear

    9.3 CRITICAL 0.3% exploit odds No fix listed
  24. CVE-2026-107408

    Memory corruption in DNS / DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety

    9.3 CRITICAL 0.3% exploit odds No fix listed
  25. CVE-2026-107410

    Memory overflow in NetScaler Push can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler

    Memory safety Citrix NetScaler ADC

    9.3 CRITICAL 0.4% exploit odds No fix listed
  26. CVE-2026-107409

    Memory corruption in DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or a Denial of Service in Citrix NetScaler

    Memory safety Citrix NetScaler ADC

    9.3 CRITICAL 0.4% exploit odds No fix listed
  27. CVE-2026-93335

    Vault Community Edition and Vault Enterprise did not consistently apply explicit ACL policy deny rules to request paths that differ only by a trailing slash. This may allow an authenticated user who holds a broader delete permission on system configuration paths to disable a secrets engine, auth method, or audit device that a more specific deny rule was intended to protect. This vulnerability (CVE-2026-93335) is fixed in Vault Community Edition 2.2.2 and Vault Enterprise 2.2.2, 1.21.14, and 1.19.25.

    Other

    6.5 MEDIUM 0.3% exploit odds Fix listed
  28. CVE-2026-92735

    HashiCorp Vault and Vault Enterprise are vulnerable to an issue in the integrated storage join process that may allow an unauthenticated attacker with network access to a new, uninitialized node to cause that node to send credentials from its server environment to an attacker-controlled server. This vulnerability (CVE-2026-92735) is fixed in Vault Community Edition 2.2.2 and Vault Enterprise 2.2.2, 1.21.14, and 1.19.25.

    Disclosure Server

    5.9 MEDIUM 0.3% exploit odds Fix listed
  29. CVE-2026-93333

    Vault's audit devices did not validate the contents of a configured audit log prefix and did not consistently enforce the server-level setting that restricts audit log prefixing. This may allow a privileged operator to inject content into audit logs, potentially leading to forged or misleading audit records. This vulnerability (CVE-2026-93333) is fixed in Vault Community Edition 2.2.2 and Vault Enterprise 2.2.2, 1.21.14, and 1.19.25.

    Other Server

    2.7 LOW 0.2% exploit odds Fix listed
  30. CVE-2026-128065

    @grpc/grpc-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. From 1.14.0 through 1.14.1, XdsServer in @grpc/grpc-js-xds can acknowledge Route and VirtualHost resources while failing to apply their RBACPerRoute override configurations. The override parser is not registered under the override message type, override maps are stored under a type URL instead of the configured HTTP filter name, and VirtualHost override maps are not read. When experimental RBAC is enabled and a trusted xDS control plane supplies a broad top-level ALLOW policy with a stricter matching override, affected servers evaluate RPCs under the broad policy and can accept requests that should be denied. This issue is fixed in version 1.14.2.

    Auth & access Library

    6.9 MEDIUM 0.4% exploit odds Fix listed
  31. CVE-2026-128066

    Pillow is a Python imaging library. From 1.0 through 12.3.0, ImageFileDirectory_v2.load() in src/PIL/TiffImagePlugin.py retains a separate bytes object for each out-of-line IFD tag value without limiting the total data read or preventing distinct tags from referencing the same file region. A small crafted TIFF or EXIF-bearing JPEG, PNG, WebP, or MPO can therefore cause memory use quadratic in the input size. TIFF and some JPEG paths trigger parsing during Image.open(), while other formats are exposed when EXIF is requested, including through getexif() or ImageOps.exif_transpose(). The declared pixel dimensions do not bound this metadata allocation, so decompression-bomb checks do not prevent process memory exhaustion. This issue is fixed in version 13.0.0.

    Denial of service Library

    8.7 HIGH 0.4% exploit odds Fix listed
  32. CVE-2026-128067

    Pillow is a Python imaging library. From 2.3.0 through 12.3.0, Pillow applications that save compressed TIFF images through libtiff can pass attacker-controlled image geometry tags to the encoder while allocating its row buffer from the actual image dimensions. The affected TiffImagePlugin._save path allows ImageWidth, ImageLength, or SamplesPerPixel from exif=, tiffinfo=, or a source TIFF IFD to make libtiff consume a larger scanline than the buffer supplied by ImagingLibTiffEncode. This can read heap memory into the generated TIFF or crash the process. When TIFF Predictor 2 is enabled, libtiff can rewrite the oversized scanline in place and corrupt memory beyond the buffer. A carried-over PlanarConfiguration value of 2 instead makes libtiff use a shorter scanline and can produce an undecodable output file, but is not established to cause the out-of-bounds access. This issue is fixed in version 13.0.0.

    Memory safety Library

    8.4 HIGH 0.5% exploit odds Fix listed
  33. CVE-2026-127275

    A vulnerability was determined in Linksys EA8100 1.0.3.216940. This issue affects the function SetRemoteSetting/SetUnsecuredWiFiWarning of the file ui_server.lua of the component JNAP API. This manipulation of the argument isEnabled/enabled causes missing authentication. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

    Auth & access Network gear

    9.3 CRITICAL 0.8% exploit odds No fix listed
  34. CVE-2026-127212

    Dokploy before 0.31.1 contains a missing ownership check vulnerability in the readAppMonitoring tRPC procedure that allows authenticated attackers to access container metrics belonging to other organizations by supplying an arbitrary appName. Attackers can query getApplicationStats with any application name, including the fixed "dokploy" control-plane service name, to read CPU, memory, network I/O, and block I/O metrics for containers they do not own on self-hosted multi-tenant instances.

    Auth & access Server

    5.3 MEDIUM 0.2% exploit odds Fix listed
  35. CVE-2026-127273

    A vulnerability has been found in Linksys EA8100 1.0.3.216940. This affects the function GetWANStatus/GetWANStatus3/IsAdminPasswordDefault of the component JNAP API. The manipulation leads to missing authentication. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Auth & access Network gear

    2.1 LOW 0.4% exploit odds No fix listed
  36. CVE-2026-127274

    A vulnerability was found in Linksys EA8100 1.0.3.216940. This vulnerability affects unknown code of the file /jnap/core/CheckAdminPassword. The manipulation results in improper restriction of excessive authentication attempts. The attack may be performed from remote. The attack requires a high level of complexity. It is stated that the exploitability is difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

    Auth & access Network gear

    2.9 LOW 0.4% exploit odds No fix listed
  37. CVE-2026-126839

    A deserialization type-restriction control in the BSON serialization component can be bypassed because the check used to recognize a class of compiler-generated types relies on an overly permissive heuristic rather than a precise identification. An unauthorized party able to supply BSON content that an application later deserializes into a loosely typed member can cause types outside the intended allow-list to be constructed and populated with unauthorized party-supplied values inside the consuming application. This can lead to unexpected object state and errors in downstream application logic. No elevated privileges beyond the ability to place unauthorized party-influenced content in the deserialization path are required.

    Code execution Library

    2.3 LOW 0.2% exploit odds No fix listed
  38. CVE-2026-126982

    A type allow-list bypass in the BSON serialization library of the MongoDB C# Driver allows a type-restriction check to be circumvented when polymorphic data is deserialized into loosely typed members. An unauthorized party who can supply or plant BSON/JSON data that the application later deserializes can cause the application process to instantiate .NET types outside the intended allow-list and populate them with unauthorized party-controlled values. In applications that contain a suitable gadget type, this can lead to arbitrary code execution in the context of the application, with corresponding loss of confidentiality, integrity, and availability. No special privileges beyond the ability to introduce data the application reads are required.

    Code execution OS & kernel

    7.7 HIGH 0.3% exploit odds No fix listed
  39. CVE-2026-126364

    Astro is a web framework for content-driven websites. From 5.14.3 until 7.4.7, Astro's /_image endpoint compared the requested local-image path with the build output directory without preserving case on case-sensitive filesystems. A sibling directory whose path differed from the output directory only by letter case could therefore pass the containment check, allowing an unauthenticated requester to read image files accepted by the image service from outside the output directory. Exploitation required on-demand rendering with the @astrojs/node adapter, a case-sensitive filesystem, and a preexisting case-variant sibling directory; ordinary traversal to unrelated paths was already rejected. This issue is fixed in Astro version 7.4.7.

    Disclosure Web app

    6.3 MEDIUM 0.4% exploit odds Fix listed
  40. CVE-2026-126365

    Astro is a web framework for content-driven websites. Prior to @astrojs/prism 4.1.2, and from @astrojs/markdoc 0.3.0 until 2.1.2, runHighlighterWithAstro() returned code unchanged when Prism had no grammar for the requested language, and callers inserted that result as raw HTML. A code block labeled with an unsupported language could therefore render embedded HTML and script instead of displaying it as text. The Prism component was affected when applications supplied untrusted code with an unsupported or attacker-controlled lang, and the @astrojs/markdoc prism() extension was affected for less-trusted content authors even when Markdoc's ordinary HTML rendering was disabled. This issue is fixed in @astrojs/prism 4.1.2 and @astrojs/markdoc 2.1.2.

    XSS Web app

    5.4 MEDIUM 0.2% exploit odds Fix listed
  41. CVE-2026-126366

    MessagePack for Ruby is an implementation of the MessagePack binary serialization format. Prior to 1.8.7, the Java-platform msgpack gem for JRuby allocated arrays and byte buffers directly from attacker-controlled array32, str32, and bin32 declared sizes before confirming that corresponding elements or bytes were available. A short MessagePack header could therefore trigger a very large allocation or sustained heap growth when an application decoded untrusted input through MessagePack.unpack or MessagePack::Unpacker, potentially exhausting the shared JVM heap. map32 and declared counts at or above 2^31 did not use the affected allocation behavior. This issue is fixed in version 1.8.7.

    Denial of service Library

    7.5 HIGH 0.5% exploit odds Fix listed
  42. CVE-2026-126367

    @grpc/grpc-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. Before 1.13.2, and from 1.14.0 through 1.14.1, the @grpc/grpc-js-xds SafeRegexValueMatcher and PathSafeRegexValueMatcher add start and end anchors without grouping a supplied top-level alternation. An expression intended to match one of several complete values can therefore match a prefix, substring, or suffix. The affected matchers are used for route selection, xDS credential identity matching, and RBAC URL path, principal name, server name, and header rules. An ALLOW policy using an alternation can consequently accept a method, certificate identity, or header value outside the intended set, while a DENY policy becomes broader rather than permissive. This issue is fixed in versions 1.13.2 and 1.14.2.

    Other Server

    4.8 MEDIUM 0.2% exploit odds Fix listed
  43. CVE-2026-126792

    A memory-safety flaw in the key-management request-building component of the library can lead to an out-of-bounds write on the heap. A fixed-size output buffer is used under an assumption about cryptographic key size that is never validated, so when the library is embedded by a caller that supplies its own cryptographic callback implementation, data larger than the buffer can be written past its end. Exploitation requires the ability to control the embedding application's in-process key-management provider configuration, a high-privilege position. The demonstrated impact is memory corruption resulting in abnormal termination of the client process.

    Memory safety OS & kernel

    5.7 MEDIUM 0.1% exploit odds No fix listed
  44. CVE-2026-126358

    Hono is a Web application framework that provides support for any JavaScript runtime. From 4.1.4 until 4.13.16, RegExpRouter can omit wildcard middleware in three version-specific cases: since 4.13.0, middleware using the explicit default parameter pattern in /api/:tenant{[^/]+}/admin/* is not applied to a route written as /api/:tenant/admin/:id; since 4.1.4, middleware on /admin/* is not applied to a route registered as /admin* for paths under /admin/; and since 4.4.0, a request path containing an encoded line terminator can reach the not-found handler without wildcard middleware. The default SmartRouter selects RegExpRouter for most applications, and the router's registration-time coverage calculation treated the first two matching pattern pairs as different while its compiled wildcard did not match line terminators in the third case. An unauthenticated client can reach a route handler or the not-found handler without authentication or authorization middleware registered on the wildcard path. TrieRouter, LinearRouter, and PatternRouter apply the middleware in the three described cases. This issue is fixed in version 4.13.16.

    Auth & access Web app

    5.3 MEDIUM 0.3% exploit odds Fix listed
  45. CVE-2026-126359

    Hono is a Web application framework that provides support for any JavaScript runtime. From 3.12.0 until 4.13.16, the css helper in hono/css escapes interpolated string values separately and therefore fails to neutralize a closing style tag when &lt; ends the template text or a preceding value and / begins the next attacker-controlled value. During server-side rendering, the combined output can close the &lt;Style /&gt; element early and cause the remainder of the interpolated value to be interpreted as HTML. Applications that place an untrusted string immediately after &lt; in a css template, including adjacent untrusted interpolations, can expose viewers to attacker-controlled HTML or script and information accessible to that page. Other uses of the css helper are not affected. This issue is fixed in version 4.13.16.

    XSS Web app

    3.4 LOW 0.3% exploit odds Fix listed
  46. CVE-2026-126360

    OpenTelemetry Python provides the Python API and SDK for OpenTelemetry. Prior to 1.45.2, TraceContextTextMapPropagator.extract() in opentelemetry-api can perform quadratic-time regular-expression backtracking on a malformed traceparent value containing a trace-context prefix, a long whitespace sequence, and an embedded newline. Exploitation requires an attacker-controlled carrier that preserves embedded newlines and permits a sufficiently large value, because conforming HTTP header values cannot contain embedded newlines. JSON-based carriers, including applicable MCP request metadata integrations, can preserve the required newline depending on the SDK, instrumentation, and message-size limits. Parsing on an asynchronous server's event-loop thread can consume excessive CPU and delay unrelated requests, while the advisory does not establish disclosure, modification, or code execution. This issue is fixed in version 1.45.2.

    Denial of service Library

    5.3 MEDIUM 0.5% exploit odds Fix listed
  47. CVE-2026-126361

    Astro is a web framework for content-driven websites. Prior to 7.4.5, Astro rendered a string used as a dynamic element name as raw HTML after applying an incomplete character filter. A / in the string could make an HTML parser treat the remainder as attributes, allowing untrusted element-name input to inject event-handler markup. The .astro dynamic-tag renderer, JSX renderer, and MDX renderer were affected, and exploitation required an application to use request-controlled or stored untrusted data as all or part of an element name. This issue is fixed in version 7.4.5.

    XSS Web app

    2.3 LOW 0.3% exploit odds Fix listed
  48. CVE-2026-126362

    Astro is a web framework for content-driven websites. From 5.7.3 until 9.1.2, the @astrojs/svelte renderer inserted a named slot into the quoted name attribute of an astro-slot wrapper without HTML escaping. Request-controlled slot names containing a quote could terminate the attribute and inject active HTML. Exploitation required a hydrated Svelte component using a client:* directive and dynamic rendering of the attacker-chosen slot; components that did not render that slot emitted only Astro's escaped fallback content. Both server rendering and client-side hydration used the unsafe slot name. This issue is fixed in version 9.1.2.

    XSS Web app

    2.3 LOW 0.4% exploit odds Fix listed
  49. CVE-2026-126363

    Astro is a web framework for content-driven websites. From 0.2.0 until 7.1.2, the @astrojs/solid-js renderer inserted a named slot into the quoted name attribute of an astro-slot wrapper without HTML escaping. A request-controlled slot name containing a quote could terminate the attribute and inject active HTML. Exploitation required a hydrated Solid component using a client:* directive and dynamic access to the attacker-chosen slot property; a component that did not render that slot emitted only escaped fallback content. This issue is fixed in version 7.1.2.

    XSS Web app

    2.3 LOW 0.4% exploit odds Fix listed
  50. CVE-2026-126355

    Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.13.16, csrf() limits origin validation to the content types normally sent by HTML forms and therefore does not validate text/ping requests generated by Chromium hyperlink auditing. Chrome and Edge can send a cross-origin credentialed POST without a CORS preflight through an &lt;a ping&gt; action, and the middleware then skips both Origin and Sec-Fetch-Site checks. The fixed request body limits exploitation to state-changing endpoints whose effect is selected by the path or query string and does not depend on submitted body data. The user's cookie must accompany the request, which generally requires a same-site origin or a cookie configured with SameSite=None, and Firefox does not send hyperlink-auditing pings by default. This issue is fixed in version 4.13.16.

    Auth & access Web app

    5.3 MEDIUM 0.2% exploit odds Fix listed

The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.