CVE-20XX-?
agent?

Just published.

The newest CVEs, straight from CVE.org and NVD.

410,579 CVEs · updated 2026-11-22 07:10 UTC

Reset all
  1. CVE-2026-112029

    A vulnerability has been found in diem-project diem up to 5.1.3. This affects an unknown part of the file lib/model/doctrine/PluginDmUser.class.php of the component SHA1 Handler. Such manipulation of the argument salt/password leads to password hash with insufficient computational effort. The attack needs to be performed locally. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

    Crypto Web app

    1.1 LOW 0.1% exploit odds No fix listed
  2. CVE-2026-112111

    The Bootstrap Shortcodes plugin for WordPress before 3.4.6 is vulnerable to stored XSS via the id attribute of the [bs_tcontent] shortcode. The bs_tcontent() shortcode handler in inc/bs_tabs.php emits the id attribute value into an unquoted HTML attribute. esc_attr() is applied, but it does not encode space characters, so a space in the supplied value terminates the attribute and any following text is parsed as additional HTML attributes, including JavaScript event handlers. This allows authenticated attackers with Contributor-level access and above to inject arbitrary web script that executes in the browser of any user who views the page and interacts with the injected element.

    XSS Web app

    5.1 MEDIUM 0.4% exploit odds Fix listed
  3. CVE-2026-112112

    An IPv6 FlowSpec validation bypass in the CZ.NIC BIRD Internet Routing Daemon allows an established BGP peer to inject FlowSpec rules matching destinations outside the address space authorized by the unicast-route validation procedure. With validation enabled on the receiving flow6 channel, BIRD fails to reject a destination prefix component with a nonzero offset, contrary to RFC 8956 section 5. It validates a reconstructed prefix with zero-filled skipped bits, although the original FlowSpec component can match a broader set of IPv6 addresses. Given a suitable unicast route from the peer, the rule can pass validation and, where export policy permits, be propagated to downstream peers. Downstream enforcement may cause unauthorized traffic filtering or redirection.

    Other Network gear

    2.3 LOW 0.3% exploit odds Fix listed
  4. CVE-2026-112026

    A security vulnerability has been detected in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. Affected is the function sha1 of the file App/Home/Model/UserModel.class.php. The manipulation of the argument Password leads to password hash with insufficient computational effort. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is told to be difficult. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

    Crypto Web app

    2.9 LOW 0.2% exploit odds No fix listed
  5. CVE-2026-112025

    A weakness has been identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. This impacts an unknown function of the file App/Home/Controller/UserController.class.php of the component Captcha Validation. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

    Other Web app

    5.5 MEDIUM 0.4% exploit odds No fix listed
  6. CVE-2026-109844

    `GET /api/v1/user/subscriptions` returned the metadata of every repository a user was watching without checking that the user still had access to it. A user who watched a private repository while having access, and later lost it, for example through a team permission downgrade, could still read its name, description, clone URLs, owner and counters. The issue was fixed in 1.27.0 and 28.0.0 and disclosed with 28.2.0.

    Auth & access Web app

    4.3 MEDIUM 0.2% exploit odds Fix listed
  7. CVE-2026-110311

    Creating a draft release through the API returned an `assets` list that was built from a release without an ID, which matched every attachment that was not linked to a release. A user who could create a draft release in a repository therefore received the metadata (file name, UUID, upload time, size and download count) of issue and comment attachments of repositories they could not read, and of abandoned uploads.

    Disclosure Web app

    4.3 MEDIUM 0.2% exploit odds Fix listed
  8. CVE-2026-110324

    The visibility check of Gitea user profiles was applied to GET requests only, while `POST /{username}` (follow and unfollow) required only a signed-in user. Any authenticated user could therefore obtain the full name, location, website and description of a user with a private profile from the response. The issue was fixed in 28.1.0 and disclosed with 28.2.0.

    Disclosure Web app

    6.5 MEDIUM 0.3% exploit odds Fix listed
  9. CVE-2026-110494

    Adding attachments to a release checked the repository and release of an attachment but not whether it was already linked to an issue or comment. A user with write access to the releases of a repository, who knew the UUID of an attachment in that repository, could link it to a release. This exposed the file name, size and download count of the attachment through the release and allowed the user to rename or delete it.

    Auth & access

    6.3 MEDIUM 0.2% exploit odds Fix listed
  10. CVE-2026-97204

    Deleting a label compared the ID of the repository in the request against the organization ID of organization labels, and the two ID sequences overlap. A user with write access to the issues of a repository could therefore delete the labels of an organization that has the same numeric ID as that repository. Labels are now deleted only within their own repository or organization.

    Auth & access Web app

    3.1 LOW 0.2% exploit odds Fix listed
  11. CVE-2026-97859

    Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered without the `individualPermsChecker` middleware that enforces the visibility of the target user. An authenticated user could therefore read the followers, following list, starred and watched repositories and public SSH and GPG keys of a user with limited or private visibility, whom they could not otherwise see. The issue was fixed in 1.27.3 and 28.0.0 and disclosed with 28.2.0.

    Auth & access Web app

    6.5 MEDIUM 0.3% exploit odds Fix listed
  12. CVE-2026-104627

    The Gitea OpenID association callback in the security settings accepted a positive OpenID 2.0 assertion without checking that the signed-in user had started the linking. Because OpenID 2.0 allows unsolicited assertions, an attacker-controlled OpenID provider could attach the attacker's identity to the account of a signed-in victim who opened a crafted link, and the attacker could then sign in as the victim through OpenID login, which does not apply the local TOTP or WebAuthn checks. The callback now requires a time-limited `state` value bound to the user.

    Auth & access Web app

    5.4 MEDIUM 0.1% exploit odds Fix listed
  13. CVE-2026-105661

    Requesting `/{username}/-/repositories` for an individual user instead of an organization made the organization home handler dereference a nil organization and panic. The request needs no authentication and no special configuration. The server answered with an HTTP 500 error and logged a panic for each request; the fix returns 404 for individual users.

    Denial of service Web app

    5.3 MEDIUM 0.3% exploit odds Fix listed
  14. CVE-2026-105964

    The Gitea Actions artifact v4 (Twirp) handlers read the whole request body into memory without a size limit. A user who can run a workflow and obtains the runner token of that run could send an oversized request to the artifact service and exhaust the memory of the server, which terminates the Gitea process. The request body is now limited to 1 MiB.

    Denial of service Server

    6.5 MEDIUM 0.3% exploit odds Fix listed
  15. CVE-2026-107618

    `POST /{owner}/{repo}/topics` was registered without the sign-in middleware that provides the cross-origin protection, so a request issued by a third-party site was not rejected. A repository administrator who visited a malicious page could have the topics of their repository changed. No other repository settings were reachable through this route.

    Auth & access Web app

    8.1 HIGH 0.2% exploit odds Fix listed
  16. CVE-2026-107686

    The Gitea web handlers for adding and removing reactions on issues and comments did not refuse locked issues for users without write access, although the API did. A signed-in user who could read an issue could therefore add or remove reactions on a locked issue and its comments, bypassing the interaction restriction of the lock. Only reactions were affected; no content could be changed.

    Auth & access Web app

    4.3 MEDIUM 0.2% exploit odds Fix listed
  17. CVE-2026-109553

    Gitea resolved the principals of an SSH certificate by searching the content of all stored public keys instead of only principal keys. When Gitea trusts a user certificate authority (`SSH_TRUSTED_USER_CA_KEYS`) and accepts arbitrary principals (`SSH_AUTHORIZED_PRINCIPALS_ALLOW=anything`), a user could register another user's public key line as their own principal, or a holder of a certificate signed by that authority could list it, and then authenticate as the owner of that key through the HTTP signature API and the built-in SSH server. Instances that do not trust a user certificate authority are not affected.

    Auth & access Server

    7.5 HIGH 0.2% exploit odds Fix listed
  18. CVE-2024-4457

    The Management Console fails to properly validate input related to the configuration of JDBC user stores. This weakness allows an attacker to supply specially crafted input that can lead to the execution of arbitrary code on the affected server. Successful exploitation of this vulnerability enables an attacker to execute arbitrary code on the server with the privileges of the WSO2 product. This could lead to a full compromise of the system.

    Injection Server

    9.1 CRITICAL 0.4% exploit odds Fix listed
  19. CVE-2026-111993

    A flaw has been found in Soarkey StudentManagement up to e08f7f1d5015af407aa4cca0ada3dea189b4937e. Impacted is the function UserDao.login of the file code/src/service/AdminDao.java. This manipulation of the argument Password causes cleartext storage of sensitive information. The attack is restricted to local execution. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

    Crypto

    1.9 LOW 0.1% exploit odds No fix listed
  20. CVE-2026-111992

    A vulnerability was detected in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. This issue affects the function Exam::startExam of the file exam.php of the component Exam Module. The manipulation of the argument topicid results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.

    Injection Web app

    2.1 LOW 0.2% exploit odds No fix listed
  21. CVE-2026-98866

    In the Linux kernel, the following vulnerability has been resolved: sched/cache: Introduce task_struct->sched_cache_grp to fix UAF Add a sched_cache_grp pointer to task_struct so that scheduler code can access the cache group directly via the task, without going through mm->sched_cache_grp. This decouples the scheduler's hot-path accesses from the mm_struct. Each task holds its own refcount on the sched_cache_group, separate from the reference held by its mm_struct. The reference is acquired in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm(). This fixes the use-after-free when account_mm_sched() reaches the group through a task whose mm is being switched, as reported by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Convert all scheduler code in fair.c and exit.c to use p->sched_cache_grp instead of p->mm->sched_cache_grp. Keep the fork/exec/exit reference management out of the generic mm paths: add sched_cache_fork(), sched_cache_fork_cleanup(), sched_cache_exec_mmap() and sched_cache_exit_mm() in kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE), so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper instead of open-coding the refcounting under #ifdef. Also add sched_cache_group_get() and task_cache_group_get().

    Memory safety OS & kernel

    unscored 0.1% exploit odds No fix listed
  22. CVE-2026-98867

    In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the logical key offset from persistent memory cache_key_decode() takes a key's logical off from the cache device and later indexes req_key_tree->subtrees[] by it in get_subtree(). An off past the device forms a subtree pointer outside the array, which rb_insert() writes through during replay. Reject a key of zero length, or whose off+len (computed in 64 bits) exceeds the device size, before it is used.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-98868

    In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject a kset that overruns its segment cache_replay(), the writeback worker and the GC worker read a kset of get_kset_onmedia_size() bytes and advance the position by it. A forged key_num makes that size exceed the segment's remaining space, so the advance walks past the segment and trips the cache_pos_advance() BUG_ON. Reject a kset whose on-media size exceeds cache_seg_remain() before use.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-98856

    In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-98857

    In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic therefore stays serviceable without growing the tables further.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-98858

    In the Linux kernel, the following vulnerability has been resolved: io_uring: fix task_work add use-after-free with SQPOLL For SQPOLL, the sqpoll thread runs task_work off its own list and doesn't need to be told about it, so it can pop and complete a request as soon as mpscq_push() has published it. If that was the last request holding the ring alive, io_ring_exit_work() then frees the ctx, stops the thread, and with it the tctx, while io_req_normal_work_add() is still looking at both after the push: BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510 Read of size 4 at addr ff11000000ca0000 by task repro/55 (...) BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70 Write of size 8 at addr ff11000000c3bd00 by task repro/55 Hold an RCU read lock across the add, like io_req_local_work_add() already does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings as well before freeing the ctx.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-98859

    In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLOTS_MASK) mod_timer(&td->release_timer, jiffies + msecs_to_jiffies(100)); A report that arrives after timer_delete_sync() has returned therefore leaves the timer queued. td is allocated with devm_kzalloc() against hdev->dev, so it is freed when the driver is unbound, after mt_remove() returns. When the timer fires afterwards, mt_expired_timeout() dereferences the freed td: struct mt_device *td = timer_container_of(td, t, release_timer); struct hid_device *hdev = td->hdev; if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags)) Simply moving the teardown after hid_hw_stop() does not fix this on its own, because mt_expired_timeout() calls mt_release_contacts(), which walks hdev->inputs; the timer still has to be quiesced before hid_hw_stop() tears the input devices down. Use timer_shutdown_sync() instead, which additionally makes any later mod_timer() a no-op, so neither ordering constraint has to be traded off against the other. This is the final-teardown pattern the function was introduced for, and hid-wiimote already uses it for the same reason.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-98860

    In the Linux kernel, the following vulnerability has been resolved: HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request As reported by Sashiko: If a transport driver encounters a hardware error and returns a negative error code such as -EPIPE, ret is implicitly promoted to size_t when compared against size. This causes the negative error code to evaluate as a large positive number, making the (ret > size) condition true. This silently converts the hardware error into a success return value and copies the unmodified buffer back, which could leave BPF programs operating on uninitialized or stale data. Fix this by casting size into ssize_t to return the actual negative error code.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-98861

    In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and unregister_fprobe_async() (used by BPF kprobe-multi) rely on standard RCU grace periods (synchronize_rcu() and call_rcu()) to wait until in-flight fprobe handlers complete before freeing the fprobe. However, if an fprobe handler executes while RCU is not watching (such as in the idle loop or nohz_full extended quiescent states), standard RCU does not track preemption-disabled sections. Consequently, synchronize_rcu() does not wait for those executions, which can lead to a use-after-free if the fprobe is freed immediately after unregistration. Ensure handlers exit early when !rcu_is_watching(). Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep recursion if probed functions interact with lockdep. Since rhltable_lookup() and rhl_for_each_entry_rcu() use rcu_dereference_all_check() (which checks rcu_read_lock_any_held()), holding preemption disabled via rcu_read_lock_sched_notrace() is fully valid and sufficient so long as rcu_is_watching() is true. Define and use guard(rcu_sched_notrace)() across fprobe_ftrace_entry(), fprobe_fgraph_entry(), and fprobe_return(). This eliminates fast-path rcu_read_lock() and lockdep overhead while guaranteeing safe grace period synchronization.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-98862

    In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit_mark_compare+0x8d/0xa0 Unlink the published rules from the RCU-visible lists and retain them on tree->rules for cleanup. If any rule has an executable mark, wait for a single RCU grace period before removing the marks and scheduling the entries for freeing. Otherwise, call_rcu() already provides the required deferred freeing without a synchronous wait.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-98863

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page. Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request is cleared on VM-Exit (including the "forced" case), i.e. there is no risk of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request trying to map the nested pages.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-98864

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the custody update and ops.dequeue() precede it. A task can thus be found on a DSQ while still SCX_OPSS_DISPATCHING. The dequeue and core-sched pick paths wait for the state to clear in ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed. The dispatcher's final store then overwrites it with SCX_OPSS_NONE and finish_dispatch() drops every later dispatch of the task. Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for reenqueue, the same way ops_dequeue() does.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-98865

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't run ops.dequeue() with a DSQ lock held ops.dequeue() is invoked with the source user DSQ's lock still held on the consume and move paths (scx_consume_dispatch_q(), move_task_between_dsqs()). A BPF scheduler which locks the source user DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq - self-deadlocks. ops.dequeue() can only call the "any" kfuncs and none of them can lock a builtin DSQ, so the global and bypass paths can't deadlock; however, all DSQ locks share one lockdep class, so iterating any user DSQ from ops.dequeue() on those paths trips the recursion check. Move the invocation after the DSQ unlock on all three paths. SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer so that the callback is invoked exactly once.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-98847

    In the Linux kernel, the following vulnerability has been resolved: rtc: spear: initialize IRQ state before requesting alarm IRQ devm_request_irq() enables the interrupt before it returns, so the handler may run while probe is still initializing the device. Initialize the MMIO address and spinlock before requesting the alarm IRQ.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-98848

    In the Linux kernel, the following vulnerability has been resolved: rtc: ac100: Assign .num before accessing .hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS) about the number of elements in .hws[], so that it can warn when .hws[] is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in ac100_rtc_register_clks() due to .num being assigned only after every clkout clock has been stored in .hws[]. With CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC 15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report during probe, and with CONFIG_UBSAN_TRAP the first store traps. Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was allocated with, right after the allocation. That is the value the loop counter ends up at on the success path anyway, so the provider's behaviour is unchanged.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-98849

    In the Linux kernel, the following vulnerability has been resolved: pfcp: fix socket lifetime on netdevice registration failure pfcp_newlink() creates the UDP socket before register_netdevice(). If registration fails after pfcp_dev_init() succeeds, the core calls pfcp_dev_uninit(), which releases the socket and clears pfcp->sk. The newlink error path then releases it again, causing a NULL pointer dereference. This was observed with failslab fault injection: FAULT_INJECTION: forcing a failure. kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net) BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50 Read of size 8 at addr 0000000000000120 by task ip/1037 Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x468/0x5cc kasan_report+0xa4/0xf0 __asan_load8+0x7c/0xd0 udp_tunnel_sock_release+0x1c/0x50 pfcp_newlink+0x128/0x184 rtnl_newlink+0x848/0xe44 rtnetlink_rcv_msg+0x468/0x514 netlink_rcv_skb+0xc0/0x1f0 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x558 netlink_sendmsg+0x2b8/0x584 ... Return from pfcp_del_sock() if pfcp->sk is NULL.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-98850

    In the Linux kernel, the following vulnerability has been resolved: net/packet: prevent TX_RING byte count overflow tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds each valid packet length to the signed int len_sum. Userspace can recycle completed frames concurrently, so a single blocking send call is not bounded by the ring size. After enough successful transmissions len_sum wraps into the negative range. In particular, 65536 65535-byte frames followed by a 65007-byte frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats that as an impossible return and triggers a BUG. On systems configured to panic on oops, a CAP_NET_RAW holder can panic the host kernel. Stop before the next frame would make the byte count exceed INT_MAX. The positive short count leaves that frame pending for a later send call. A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build of Linux 7.3-rc4. With this change, the same reproducer returned the expected positive short count without an oops.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-98851

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: drop flowtable reference on init error path nft_flow_offload_init() bumps the flowtable use count with nft_use_inc() before calling nf_ct_netns_get(). When the latter fails, the error is returned as-is and the reference is leaked. The upper layers do not balance it either: nf_tables_newexpr() clears expr->ops when the expression init callback fails, so the nft_expr_more() iteration in nft_rule_expr_deactivate() and nf_tables_rule_destroy() stops right before the failed expression and its ->destroy callback, which would drop the reference, never runs. Each failed rule addition therefore leaks one flowtable reference and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE keeps reporting -EBUSY even though no rule references it. Save the nf_ct_netns_get() return value and undo the nft_use_inc() when it fails, restoring the inc/dec pairing within nft_flow_offload_init() itself.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-98852

    In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if set, on the inner IPv6 header. Read the headers with skb_header_pointer(). Keep the skb_network_header_len() check when !skb->encapsulation to also catch encapsulated packets without skb->encapsulation (e.g., virtio). Use the same helper in skb_csum_hwoffload_help(). Its open coded test has the false positive of (2) and ignores the inner header. Background: checksum offload of tunneled packets invariants: Non-GSO skb: - If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes the outer checksum in software and the device offloads only the inner L4 checksum. - If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP, Remote Checksum Offload), the device offloads the outer UDP or GRE checksum instead. GSO skb: - A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM computes both inner and outer checksums per segment. The outer checksum is seeded with only the pseudo-header checksum. A NETIF_F_IPV6_CSUM device must parse through the outer headers to reach the inner ones.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-98853

    In the Linux kernel, the following vulnerability has been resolved: net: gso: limit recursive IP-in-IP segmentation IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment() for each nested IP header. encap_level tracks header bytes, not callback depth, so a deep chain can exhaust the kernel stack. Making inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP GSO/TSO later made the path reachable. The IPv6 stackable path was introduced separately and uses the same guard. Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once per top-level GSO operation and preserved across GRE/UDP context changes. Use the existing IP_TUNNEL_RECURSION_LIMIT for both handlers. The first five entries pass, and the sixth returns -EINVAL before dispatching another GSO callback.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-98854

    In the Linux kernel, the following vulnerability has been resolved: of/overlay: only treat a positive changeset id as registered of_overlay_fdt_apply() stores the idr_alloc() return value in ovcs->id before checking it. On failure the stored id is negative, free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove() is called with a negative id and list_del() runs on ovcs->ovcs_list, which is not initialized until after the id allocation. An allocation failure at that point dereferences NULL. Make free_overlay_changeset() treat only a strict-positive id as registered. The rest of the function already copes with a partially-initialized ovcs, so the error path stays a plain goto err_free_ovcs.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-98855

    In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-98838

    In the Linux kernel, the following vulnerability has been resolved: vt: skip screen update for DEC alignment test on backgroup consoles [BUG] Recently, we encountered a KASAN warning as follows: BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140 Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239 CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 Call Trace: <TASK> ... kasan_report+0xf0/0x120 fb_pad_aligned_buffer+0x11f/0x140 ccw_putcs+0x86c/0xa80 fbcon_putcs+0x338/0x410 do_update_region+0x21d/0x450 do_con_write+0x1e0e/0x4880 con_write+0x13/0x80 n_tty_write+0x374/0x1010 file_tty_write.isra.0+0x404/0x7a0 ... reproduce: 1) open /dev/tty0, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 8 and op.height = 16 (visible VC1) 2) open /dev/tty1, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 28 and op.height = 24 (invisible VC2) 3) echo 3 > /sys/devices/virtual/graphics/fbcon/rotate_all 4) write EShash8(esc hash8) to tty1 [CAUSE] All VCs render to the framebuffer. setfont only modifies the target VC's font without resizing the framebuffer backing buffer (par->rotated.buf); the buffer is only resized for the visible VC (fbcon_do_set_font -> ... -> vc_do_resize -> update_screen). This relies on the con_should_update() check performed before every update_region(). However, the ESC # 8 path (do_con_trol -> do_update_region) omits the con_should_update() check. After changing the font size of an invisible VC, do_update_region() fills using the new font size against a buffer that was never resized, causing an out-of-bounds access. [FIX] Only push the update when the console is visible and not blanked, add the con_should_update() check in the do_con_trol() like every other call site of do_update_region() (update_region(), invert_screen(), ...).

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-98839

    In the Linux kernel, the following vulnerability has been resolved: vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection() In paste_selection(), the loop copies min_t(unsigned int, vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into tty_ldisc_receive_buf() and increments pasted += count. Because the selection mutex (vc_sel.lock) is dropped inside the loop Whenever the line discipline buffer fills up and paste_selection() sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl can replace vc_sel.buffer with a shorter selection and reduce vc_sel.buf_len below pasted. When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an unsigned integer to a large positive value, causing tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer. Fix this by terminating the loop when pasted >= vc_sel.buf_len. Kernel stack trace (Linux 7.3.0-rc3): ================================================================== BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650 Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0x70/0xa0 print_report+0x153/0x4c6 kasan_report+0xf1/0x120 kasan_check_range+0x11c/0x200 __asan_memcpy+0x29/0x70 n_tty_receive_buf_common+0xa01/0x1650 tty_ldisc_receive_buf+0x66/0x110 tty_port_default_receive_buf+0x6b/0xb0 flush_to_ldisc+0x1b4/0x410 process_one_work+0x6ff/0x1110 worker_thread+0x4a8/0xb70 kthread+0x307/0x3e0 ret_from_fork+0x3ed/0x680 </TASK> ==================================================================

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-98840

    In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") sits after the 'if (ret)' block, so the copy-failure break path exits the loop without reloading vc. If the vc was kfree()'d via vc_port_destruct during the unlocked copy_from_user() window, the post-loop 'if (written && vc) vcs_scr_updated(vc)' is reached with a stale non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only handles the NULL case, not this stale-non-NULL case; vcs_notifier() then reads param->vc->vc_num from freed memory: BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0 Read of size 2 at addr ffff888007149190 Call Trace: vcs_notifier+0x7c/0xd0 atomic_notifier_call_chain+0x70/0xa0 vcs_scr_updated+0x77/0xa0 vcs_write+0x71b/0x7e0 Allocated by task: vc_allocate -> con_install -> tty_open Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct) Move the reload to immediately after console_lock(), before 'if (ret)', so every break path below passes a fresh vc to the post-loop vcs_scr_updated().

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-98841

    In the Linux kernel, the following vulnerability has been resolved: virt: vmgenid: set driver_data before registering notification handlers Both probe paths register their notification handler before assigning driver_data, which the handler dereferences. In the devicetree path, the notification IRQ can fire as soon as devm_request_irq() registers the handler: the interrupt may already be pending at probe time, for example when a VMM injects the generation-changed notification while restoring a guest from a snapshot that was taken before the driver had probed (Firecracker does exactly this on snapshot restore). The IRQ is also requested with IRQF_SHARED, so another device sharing the line can trigger the handler just as early. The handler then calls vmgenid_notify(), which dereferences the still-NULL driver_data and panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none) Hardware name: linux,dummy-virt (DT) pc : vmgenid_notify.isra.0+0x24/0x8c lr : vmgenid_of_irq_handler+0x14/0x34 Call trace: vmgenid_notify.isra.0+0x24/0x8c (P) vmgenid_of_irq_handler+0x14/0x34 __handle_irq_event_percpu+0x44/0x1bc handle_irq_event+0x4c/0xb4 handle_fasteoi_irq+0xf8/0x1f8 The ACPI path has the same ordering problem: the handler is installed with acpi_install_notify_handler() before driver_data is assigned. ACPI notifications are dispatched asynchronously from a workqueue, so the window is narrow, but a notification arriving between the two calls hits the same NULL dereference. Assign driver_data before registering the handlers. The state is fully initialized at that point, so the handlers are safe to run. Should registration fail, the probe error path leaves no dangling pointer behind: the driver core clears driver_data in device_unbind_cleanup().

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-98842

    In the Linux kernel, the following vulnerability has been resolved: module: fix lost error code from codetag_load_module() If codetag_load_module() fails, err is not set to reflect the failure and load_module() returns 0 after the module has been torn down. Also, if the module is a livepatch, mod->klp_info allocated by copy_module_elf() leaks on this error path. Free it via a new livepatch_cleanup label.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-98843

    In the Linux kernel, the following vulnerability has been resolved: netfs: zero gaps in read-gaps folio to avoid writing back stale data netfs_read_gaps() leaves gaps around a streaming write's dirty region unread on the server side, so a short/EOF response there left stale folio content that later got written back. Zero it after the read completes, not before: netfs_wait_for_read() returns rreq->transferred once ret >= 0, so build an iterator over the same bvec array the read used, advance past ret, and zero the rest. The dirty region already maps to sink pages in that array rather than the real folio, so this can't touch it, and only the actual shortfall gets zeroed instead of the whole gap upfront.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-98844

    In the Linux kernel, the following vulnerability has been resolved: netfs: clear post-EOF pagecache when extending a file via write Fix netfs to erase the contents of a hole created after the EOF by an ordinary write if dirty data has been previously left there by writes through an mmapped region. Neither the buffered nor the unbuffered/DIO write path clears that stale pagecache. Zero the tail of the folio straddling the EOF before an extending write. That is the only folio that can hold data written past the EOF through an mmap, as pages wholly beyond the EOF can't be faulted in. The folio is zeroed rather than dropped so a concurrent extending write can't lose data. Both write paths downgrade the i_rwsem to shared, so extending writes can run concurrently and the i_size read by the caller may be stale by the time the folio is locked. Re-read i_size under the folio lock and clamp the zeroed range up to it, so a racing write that already put data into the folio isn't clobbered. Wait for any writeback on the folio to finish before zeroing it so that the pagecache isn't modified while it may still be read by the transport during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather than blocking on the folio lock, on writeback, or in folio_mkclean()'s rmap walk when the folio is mapped. truncate_pagecache() can't be used here: it must be called with the i_rwsem held exclusively, but these write paths only hold it shared, and it would block unconditionally, breaking IOCB_NOWAIT. Callers that hold i_rwsem exclusively for the whole resize (truncate, setattr, fallocate, clone) exclude any genuine concurrent buffered writer, so staleness can instead be decided from the folio's dirty state, as pagecache_isize_extended() already does for filesystems that serialise writes against truncate/setattr via a single i_rwsem. Export netfs_clear_stale_post_isize() helper to handle such case. The helper is required by the CIFS client to fix generic/363.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-98845

    In the Linux kernel, the following vulnerability has been resolved: tpm: Disable TPM on null key name mismatch The null key name check exists to protect against TPM reset attacks, so a mismatch should stop the device from serving further requests. Currently it does not disable the chip when it finds a mismatch. The mismatch is logged: tpm tpm0: null key integrity check failed but the chip keeps serving commands: / # tpm2_getcap -c properties-fixed TPM_PT_FAMILY_INDICATOR: as UINT32: 0x08322e3000 as string: "2.0" ... tpm2_load_null() where the null key name check is run sets the chip as disabled only if the rc is non zero. When the mismatch is seen, rc is zero at that point and it returns success. The other issue is that the caller expects the null key handle to be populated when the function returns 0 which it does here without writing the handle and proceeds assuming the null key handle is valid. During the test, I noticed that tpm2_start_auth_session() uses the uninitialized stack value as the key handle since tpm2_load_null() returns 0 despite the integrity failure and proceeds with TPM2_CC_START_AUTH_SESS with this value as salt key handle. Set rc to -ENODEV on the mismatch. The error path then disables the chip and returns the correct code to the caller. Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name of the re-created null key. The chip is now disabled on the mismatch.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed

The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.