CVE-20XX-?
agent?

Just published.

The newest CVEs, straight from CVE.org and NVD.

2,121 CVEs · updated 2026-11-19 13:27 UTC

Reset all
  1. CVE-2026-126624

    Unverified ownership in the Windows installer of Progressive Robot hMailServer 6.3.7 allows a local authenticated user to run code as the mail server's service account or as an administrator when setup installs into, or upgrades, a program folder that accounts other than the administrators could write before, such as one made beforehand at the root of a drive. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but setup refused nothing that was already in them, or in the folders that hold the event script, the add-ons and the database scripts: a program, a library, a script or a settings file that another account owns, or whose own permissions let another account change it, is kept with that owner and those permissions, which the hardening of the folders does not take away. Setup then runs programs from Bin with the administrator's elevated rights, and the service, which runs as LocalSystem or as its virtual account, runs them and the event script, so that a library such an account placed in Bin is loaded in place of the system's; the account can still change the file after the installation. The default installation under Program Files is not affected.

    Other Server

    7.3 HIGH 0.1% exploit odds No fix listed
  2. CVE-2026-126625

    Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.3.7 allow a local authenticated user to run code as the administrator who installs the product, when it is installed into a new program folder in a location whose permissions let every user write, such as the root of a drive. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but its setup lets Inno Setup make a new program folder first, with the permissions the folder above hands down, and replaces them only afterwards, tens of milliseconds later (33 to 139 milliseconds in the project's test runs). In that time any local account may make files and folders in the new folder, which keep that account as their owner, among them the Bin folder that setup then copies the programs into. Setup runs programs from Bin with the administrator's elevated rights, registering the service among them, before its hardening at the end of setup takes such a folder back, and those programs load a library placed in Bin in place of the system's. The default installation under Program Files, whose folders give ordinary users read and execute only, is not affected.

    Auth & access Server

    6.7 MEDIUM 0.1% exploit odds No fix listed
  3. CVE-2026-126621

    Progressive Robot hMailServer 6.0.0-B1 through 6.3.7 on Windows hands OpenSSL the names of its own TLS files - the listeners' certificates, chains, private keys and Diffie-Hellman parameters, a port's client-certificate CA file (from 6.2.19), the object store's CA file (from 6.3.4) and the ACME client's keys and certificates - as Latin-1 bytes, which on code page 1252 are the code page's own for U+00A0 to U+00FF, and OpenSSL's file opening on Windows reads a name as UTF-8 first and opens the file at that reading when it is there, or creates it there when its folder is. When every byte of a configured name outside ASCII also reads as UTF-8 - for example U+00C3 U+00A9, the bytes C3 A9, which are U+00E9 in UTF-8 - the server used the file at that other name whenever one was there, which allows a local attacker who can create that file or its folder but cannot change the configured one, as any user can by default beside a file an administrator keeps under ProgramData, to have a port that logs on by client certificate (from 6.2.25) accept certificates from a certificate authority of the attacker's own and so sign in over the network as any mailbox without its password; to have the server trust such an authority for its object store and, intercepting that connection, read and modify the messages it stores; to receive the private keys the ACME client writes, the key of a certificate issued for the server's names among them; or to keep TLS ports from starting. The configuration is not the default: by default these files have names in ASCII, client certificates are off on every port, and the object store and ACME are off. The Linux builds are not affected.

    Crypto Server

    7.5 HIGH 0.2% exploit odds No fix listed
  4. CVE-2026-126626

    The web services listener of Progressive Robot hMailServer 6.3.3 through 6.3.7 counts every failed CardDAV, CalDAV or Autodiscover sign-in from a proxy it trusts - one on the same machine, or one named in WebServicesTrustedProxies, whose X-Forwarded-Proto it believes - against the proxy's own address, which allows a remote unauthenticated attacker who can reach the proxy to have that address banned from the server's mail listeners. The listener, off by default (WebServicesHttpPort and WebServicesHttpsPort 0), signs an account in with HTTP Basic over HTTPS for CardDAV from 6.3.3 and for CalDAV and Outlook Autodiscover from 6.3.4. Behind a TLS-terminating proxy, which the server trusts when it is on the same machine or named in WebServicesTrustedProxies, the listener takes the client's HTTPS from the proxy's X-Forwarded-Proto header, but it does not believe X-Forwarded-For and sees the proxy's address for every client. Each failed sign-in counted towards the auto-ban against that address, so that failed sign-ins through the proxy from anybody, under any user name, reaching MaxInvalidLogonAttempts (3 within 30 minutes by default) wrote an IP range that refused the proxy's address at the SMTP, POP3, IMAP and ManageSieve listeners for AutoBanMinutes (60 by default), and could write it again each time it lapsed. For a proxy on the same machine that address is the loopback address, so that a webmail on that machine, local scripts that submit mail and the other local clients of the mail listeners were shut out; for a proxy at another address that also carries mail, every mail client behind it was. Such a proxy forwarding to the listener's HTTPS port, re-encrypting, was counted against in the same way, and listing it in WebServicesTrustedProxies did not spare it. The auto-ban is on by default and AutoBanNeverBan, which spares an address, is empty by default; the listener itself went on serving the proxy.

    Other Server

    5.3 MEDIUM 0.5% exploit odds No fix listed
  5. CVE-2026-126612

    Improper link resolution in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.7 allows a local authenticated user to run code as the mail server's service account or as an administrator when the path to the program folder passes through a junction, a symbolic link or a mount point that the user controls or that every user may change, such as a junction made at the root of a drive, which takes the root's permissions, or through a folder that every user may rename. Setup installed the programs through any such link without first checking who controls it, or whether a folder above the program folder may be renamed, and the service is registered to run the programs by that path, so the programs are installed where a link another account controls leads, or that account can later make the path lead to a folder it controls; the service, which runs as LocalSystem or as its virtual account, and the programs administrators run from Bin are then started from there. 6.3.7's fix for CVE-2026-107571 does not cover this: its hardening of the program folder, Bin and ControlPanel does not change a folder reached through a link that the administrators do not alone control, and setup does not refuse such a path: it installs through the link and at most reports afterwards that the folders could not be hardened. The default installation under Program Files is not affected.

    Other Server

    7.8 HIGH 0.2% exploit odds No fix listed
  6. CVE-2026-126613

    Allocation of resources without limits in the JSON reader of Progressive Robot hMailServer 6.3.2 through 6.3.7 allows a remote attacker to exhaust the server's memory and hold its threads, making mail delivery, the REST API and the webmail unavailable. The reader built a tree of values far larger than the text it read, copying each value into every level above it, and set no bound on the number of values, so a single JSON document of many small values, within the 16 MB the server reads, raised the service's memory by about 2 GB and held one thread for seconds to minutes. From 6.3.4 a remote unauthenticated attacker reaches the reader by mailing such a document as a TLS-RPT report, up to 16 MB once decompressed, to a hosted domain's report mailbox, where an administrator has set one; it is read on a mail delivery thread (ten by default), and those threads deliver all mail, local and outbound. From 6.3.4 it is also reached without an account through the reply to a password-protected message, with the message's link alone, where the REST API is on (it is off by default) and a public base URL for such links is set; and by any account, from 6.3.2 through the webmail's send and draft routes and from 6.3.4 through its other routes granted 16 MB and the send API; the webmail's send, draft and settings routes parsed the body again for each member read. The REST API serves every request on four worker threads, in the process that also serves SMTP, IMAP and POP3, so a few such documents at once make it unavailable and can exhaust the machine's memory and end the whole service. This is a separate defect from CVE-2026-107574, the reader's handling of duplicate member names, fixed in 6.3.6.

    Denial of service Server

    7.5 HIGH 0.5% exploit odds Fix listed
  7. CVE-2026-126614

    The web services listener of Progressive Robot hMailServer 6.3.3 through 6.3.7 does not apply the server's IP ranges to the connections it accepts, which allows a remote unauthenticated attacker to go on guessing account passwords at the listener's sign-ins after the auto-ban has banned the attacker's address. The listener is off by default (WebServicesHttpPort and WebServicesHttpsPort 0). From 6.3.3 its CardDAV, and from 6.3.4 its CalDAV and its Outlook Autodiscover answer to a request that carries credentials, sign an account in with HTTP Basic over HTTPS. A failed sign-in there counts towards the auto-ban as a failed logon on any other protocol does: when the failures counted from one address reach MaxInvalidLogonAttempts (3 within 30 minutes by default), the server writes an IP range that refuses the address for AutoBanMinutes (60 by default), and the SMTP, POP3, IMAP and ManageSieve listeners refuse it. The web services listener asked no IP range when it accepted a connection (in 6.3.3 nothing, from 6.3.4 the country policy alone), so it went on serving such an address, whether its ban had been earned there or on another protocol, and also an address that an administrator's IP range allowing nothing holds. Each failed sign-in there closed only its own connection, and the next connection was accepted, during the ban and after it. The firewall rule and command the auto-ban can drive (AutoBanFirewall and AutoBanCommand, off by default) are told only the SMTP, POP3 and IMAP ports, so that the firewall rule and the packaged hook did not close the listener's ports, and the fail2ban jail packaged for Linux (off by default) lists only the mail and ManageSieve ports. The only limit left on the guesses at one account there was the per-name lockout (AccountLockoutThreshold in hMailServer.ini, 0, off, by default), which has a separate defect fixed in the same release. The flaw is reached on the listener's HTTPS port: behind a TLS-terminating proxy the listener sees the proxy's address for every client, and a ban never named the client there.

    Auth & access Server

    5.3 MEDIUM 0.4% exploit odds Fix listed
  8. CVE-2026-126615

    The sign-in of Progressive Robot hMailServer 6.2.22-pre2 through 6.3.7 takes for an account names that are not its address but under which the database's own comparison finds it, while the per-name lockout and the compromised-account hold are kept by the name as the client gave it. This allows a remote unauthenticated attacker to go on guessing an account's password beyond the lockout's threshold, and anyone who has the password of an account held for review to sign in to it. The per-name lockout (from 6.2.22-pre2; AccountLockoutThreshold in hMailServer.ini, 0, off, by default) locks a name after repeated failed sign-ins. The hold (from 6.3.4, where the compromised-account detection is set to enforce, which is not the default) refuses an account judged to have been taken over. Both are asked, before the password, of the name the client gave: trimmed, in lower case and with a domain alias or the default domain applied. The account whose password the sign-in then checks is whichever one the database finds under that name. The databases find an account under spellings that this key counts apart. MySQL and MariaDB find it under one with accented letters in place of plain ones, and MariaDB 11.8, in a database made before 6.3.4, also under one with full-width letters, with a single letter in place of a pair of plain ones, or with characters its comparison ignores in any number. SQL Server and SQL Server Compact find it under one with full-width letters or with characters their comparison ignores in any number, and SQL Server also under one with a single letter in place of a pair of plain ones, with a character of Latin-1 in place of a digit and, for an address holding letters of Latin-1 outside ASCII, under those letters in the other case, and, under an accent-insensitive collation, with accented letters. PostgreSQL finds it under one holding a letter whose lower case under the database's locale is a plain letter, and, for an address holding letters outside ASCII, under those letters in the other case; on the build for musl (from 6.3.6) the server's own lower case folds nearly all of these too. On every database, a domain alias saved with white space at the end of its name gives such a spelling too, and on every database but PostgreSQL so does an account's bare local part where the default domain was saved with spaces at its end and no other white space (neither is the default). Each such spelling has a lockout threshold of its own, so the lockout limits the guesses at an account only to its threshold times the number of the account's spellings. That is far beyond any threshold for most addresses on MySQL and MariaDB, and without limit on SQL Server, on SQL Server Compact, the database the Windows installer uses by default, and before 6.3.4 on MariaDB 11.8. A locked name is got round under another spelling. A held account is signed in to under another spelling with its password over IMAP, POP3 and SMTP AUTH, and, where they are turned on (off by default), over ManageSieve, the REST API and the webmail. IMAP LOGIN, offered as installed, carries such spellings on MySQL, MariaDB and SQL Server Compact, and, on SQL Server and PostgreSQL, for some addresses; the sign-ins that carry a name as UTF-8 carry them for the others on SQL Server, and on PostgreSQL for those holding one of the plain letters another letter lowers to or a letter outside ASCII with another case. The same lookup mapped to accounts the names given by an OAuth 2.0 token, a client certificate, a Kerberos ticket and an OpenID Connect or SAML identity provider, where those are set up (none is by default), so that a name an issuer gave to one party could sign in to another's account; OAuth 2.0 tokens were mapped so from 6.2.0, before the per-name lockout existed. A name holding a NUL character, carried from 6.3.0 on Linux and 6.3.3 on Windows, failed the statement on MySQL, MariaDB and PostgreSQL.

    Auth & access Server

    5.3 MEDIUM 0.3% exploit odds No fix listed
  9. CVE-2026-126616

    The auto-ban of Progressive Robot hMailServer 6.2.0 through 6.3.3, with a MySQL or MariaDB database, can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker to go on guessing account passwords from a single address without being banned. The server makes its MySQL tables in MySQL's utf8 character set, which holds no character outside the Basic Multilingual Plane, sends its statements as UTF-8 over a utf8mb4 connection and leaves the database's default strict mode in place. From 6.2.0 it decodes the user name of a SASL PLAIN logon as UTF-8, so the name can hold such a character. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range named "Auto-ban: " followed by the user name of the logon that reached the limit, and drops the connection. If such a character is in the part of the user name that the range's name keeps (the name is cut to 100 characters), the database refuses the range: no range is saved, the address is not refused, and, its count having already been cleared, it is given the next full set of attempts. An attacker can in this way spend all but the last attempt of each set on password guesses, and make the last under such a name. On Windows, POP3 AUTH PLAIN reaches it on a server as installed, and IMAP AUTHENTICATE PLAIN where IMAP SASL authentication is turned on (off by default); on Windows and on Linux (from 6.3.0), SMTP AUTH PLAIN reaches it where plain-text authentication is allowed (off by default), and ManageSieve and CardDAV where they are turned on (off by default). Each failed save is reported in the server's error log. A database whose strict mode has been turned off stores the character as a question mark and makes the first such ban, but refuses every later ban named after the same user name, or after one holding other such characters in their place, as a duplicate while the first stands, since the server cannot look up a name holding such a character there.

    Auth & access Server

    5.3 MEDIUM 0.4% exploit odds No fix listed
  10. CVE-2026-126617

    SQL injection in the database layer of Progressive Robot hMailServer 6.0.0-B1 through 6.2.18, when the server uses MySQL/MariaDB or PostgreSQL, allows a remote attacker to alter SQL statements the server runs. On those two engines parameters are not bound: SQLStatement::GenerateFromCommand wrote each value into the statement's text as a quoted literal with a separate string replacement over the whole text per parameter, so a value holding the name of a parameter substituted after it had that name replaced, inside the value, by the later value with its own quotes, which ended the literal early and placed the later value in the statement as SQL. The row the server writes for each recipient of a queued message carries the recipient's address twice, so in the default configuration an authenticated user who may send mail reaches it by sending to an address of their choosing. A remote unauthenticated sender reaches the same statement through a message the server sends to the envelope sender, such as a delivery failure notice or an automatic reply, and, when greylisting or message indexing is enabled (both are off by default), through the greylisting record's envelope addresses or through the message metadata the server stores for IMAP SORT, which carries four header fields of a received message. An altered statement runs with the privileges of the server's database account; on PostgreSQL, whose client call runs every statement in the text it is given, further statements can follow it, while on MySQL/MariaDB, where one statement is run per call, the change is confined to the statement it is in. SQL Server and SQL Server Compact, where parameters are bound, are not affected.

    Injection Server

    8.8 HIGH 0.4% exploit odds No fix listed
  11. CVE-2026-126609

    Progressive Robot hMailServer 6.2.25 through 6.3.7 on Windows, with a PostgreSQL database, the connection's sslmode require, verify-ca or verify-full, and a root certificate file named by PostgreSQLSslRootCert (from 6.2.25) or, with TlsMode=verify-full and neither PostgreSQL key set, by TlsCaFile (from 6.3.4), hands the file's name to libpq as bytes in the system's ANSI code page (up to 6.3.5 as Latin-1 bytes, which on code page 1252 are the code page's own for U+00A0 to U+00FF), and libpq looks for the file by those bytes and then hands the same bytes to OpenSSL, whose file opening on Windows reads a name as UTF-8 first and opens the file at that reading when one is there. When every byte of the name outside ASCII also reads as UTF-8 - for example U+00C3 U+00A9, the bytes C3 A9 on code page 1252, which are U+00E9 in UTF-8 - the database server's certificate was checked against the file at that other name whenever one was there, which allows a local attacker who can create that file but cannot change the configured one, as any user can by default beside a file an administrator keeps under ProgramData, or beside a folder directly under the system drive's root whose permissions the administrator restricted, and who can intercept the connection to the database server or stand in for it, to have hMailServer trust a certificate authority of the attacker's own and read and modify the traffic between hMailServer and its database, the database password included; the file alone, holding no authority that issued the database server's certificate, stops hMailServer from connecting to its database. The same applies in 6.3.4 through 6.3.7 to TlsCaFile when an Oracle MySQL client library has been put in place of the bundled MariaDB Connector/C, since that client opens the file through OpenSSL in the same way; the bundled MariaDB Connector/C opens the file in the code page and is not affected, and neither are the Linux builds. The configuration is not the default: by default no root certificate file is named.

    Crypto Server

    7.5 HIGH 0.2% exploit odds No fix listed
  12. CVE-2026-126610

    Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database and TlsMode=verify-full, does not hand the database client the CA file that TlsCaFile names when the file's name contains a character outside ASCII on Linux, or above U+00FF on Windows, which allows an attacker who can intercept the connection to the database server to read and modify the traffic between hMailServer and its database, by presenting, with MariaDB Connector/C 3.4.2 to 3.4.10 as the client, a certificate from any authority, its own included, for any name, and otherwise a certificate for the database server's name issued by any certificate authority in the system's trust store. The server converted the name for the client with the C runtime's conversion in the C locale, which gives an empty string for such a name, and then set no CA file at all, without an error, while certificate verification stayed on, so the client - MariaDB Connector/C, bundled on Windows and the distribution's on Linux - verified the certificate of a database server over the network against the system's trust store instead of the configured CA; Connector/C 3.4.2 to 3.4.10 (bundled on Windows in 6.3.4 to 6.3.6) went further and, with no CA file, took a certificate within its dates whose issuer it could not find, for any name, with neither its chain nor its name checked and no password proof, when the server offered first a sign-in method that hashes the password, which an attacker in the middle chooses (MariaDB's CONC-853, fixed in Connector/C 3.4.11), and Connector/C 3.4 accepted from a MariaDB 11.4 or later server a certificate the store did not vouch for when that server proved it held the account's password; on a connection it treats as local (127.0.0.1, ::1, a Unix socket, a named pipe, and localhost on Windows), Connector/C 3.4.1 and later checked neither the certificate's issuer nor its name, so that a local attacker able to stand in for the database server could present any certificate within its dates of its own making. The settings line of hmailserver --check-database still named the configured file, and the application log said the certificate had been checked. With MariaDB Connector/C 3.4.1 to 3.4.9 as the client - bundled on Windows in 6.3.4 to 6.3.6, and the client of Linux distributions that have not patched it - the missing CA file also met the precondition of CVE-2026-107819, so that a certificate issued for any other name by a trusted authority was enough to obtain the database password. On Linux the file was found only when the server ran on glibc under a locale whose character set holds the name's characters (a UTF-8 locale, or a legacy 8-bit one the system has, in whose bytes the file is then named); with no locale, LC_ALL=C or a locale the system lacks, and on Alpine (musl), the connection failed instead. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate.

    Crypto Server

    7.4 HIGH 0.2% exploit odds Fix listed
  13. CVE-2026-126611

    Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database, TlsMode=verify-full and no TlsCaFile, does not verify the database server's certificate's issuer or name when the connection is one that MariaDB Connector/C treats as local - Server= set to 127.0.0.1, ::1 or localhost (on Linux a Unix socket), to . on Windows (a named pipe), or to a comma-separated list of servers that holds such an element - which allows a local attacker who can stand in for the database server, for example by listening on its port while it is stopped or restarting, to receive the database sign-in, the password included, and to read and modify the traffic between hMailServer and its database. hMailServer applied verify-full by turning the client's certificate verification on without a CA file, but MariaDB Connector/C 3.4.1 and later, on a connection they treat as local and with no CA file, accept any certificate within its validity period that is self-signed or sent with its own root, for any name (Connector/C 3.4.2 to 3.4.10 also one whose issuer they cannot find), so the client accepted the certificate an impostor made, asked no proof of the password and allowed a switch to an authentication method that sends the password unhashed, while hmailserver --check-database said the certificate had been checked against the system's trust store and the application log that it had been checked. The Windows builds bundle Connector/C 3.4.9 (6.3.4 to 6.3.6) and 3.4.11 (6.3.7); on Linux the distribution's client is used, and Connector/C 3.3 and 3.4.0 and Oracle's MySQL client are not affected. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate.

    Crypto Server

    7.0 HIGH 0.1% exploit odds No fix listed
  14. CVE-2026-126607

    Progressive Robot hMailServer 6.2.3 through 6.3.7 on Windows, with a MySQL or MariaDB database, hands the bundled MariaDB Connector/C the folder of its authentication plugins (the plugin folder in the installation's Bin folder) as Latin-1 bytes, which the client reads in the system's ANSI code page when it builds a plugin's path and loads the plugin with LoadLibraryExA, which allows a local authenticated user to execute code as the hMailServer service's account (LocalSystem, or the service's virtual account for a new installation from 6.3.4) by creating the folder those bytes name in the code page and placing in it a DLL with a plugin's name, when the installation folder's path holds a character between U+0080 and U+00FF whose byte the code page reads as another character, and none above U+00FF, and the user can create that other folder (by default any authenticated user may create a folder directly under the root of the system drive). The server converted the path with the C runtime's wcstombs_s in the C locale, which writes each character up to U+00FF as the byte of the same value: on code page 1252 those bytes are the same letters, while on another code page, such as 1251, or on a UTF-8 code page, they name another folder. The client loads the plugin the database server names in its greeting, unless it is built in, and any plugin the server names in an authentication switch, and tries again at each connection while a load fails, so with a MySQL 8.0 or later server, whose greeting names caching_sha2_password by default, the DLL is loaded at the next connection the service makes, whatever plugin the database account uses; a DLL's entry point runs when it is loaded. A path holding any character above U+00FF was handed over as an empty string, whatever the code page, from which the client makes a plugin's name at the root of the current drive: for the service, whose current folder is System32, that is the root of the system drive, where by default only administrators can create a file, but the server's own database commands (hMailServer.exe --check-database, --upgrade-database and the others from 6.3.4, and the /Debug and /Test console modes from 6.2.3) run in the folder they are started from - the product tells administrators to run them from an elevated prompt in the Bin folder, and the setup of 6.3.4 and 6.3.5 ran two or three of them itself with the Bin folder as their working folder for a new installation with an external database - so a DLL that a local authenticated user placed under a plugin's name at the root of a drive other users may write, such as a FAT or exFAT volume, was loaded into the administrator's process at the command's first connection to a MySQL 8.0 or later server. 6.3.8 fixes both cases: it hands the folder in the code page's bytes or by its short (8.3) name, and where neither can be written, a folder under the Windows system folder that holds no plugin and that only administrators can create, or else refuses the connection before attempting it; it never hands the empty value or a folder the current drive completes. The configuration is not the default: the default installation folder, under Program Files, is ASCII. Linux builds set no plugin folder and are not affected.

    Code execution Server

    7.8 HIGH 0.2% exploit odds No fix listed
  15. CVE-2026-93487

    In affected versions of Octopus Server, incorrect validation of the permissions assigned to a user that would allow them to create project triggers could result in the user being able to run runbooks or create deployments they were not authorised to perform.

    Auth & access Server

    7.1 HIGH 0.3% exploit odds No fix listed
  16. CVE-2026-105948

    In affected versions of Octopus Server, incorrect validation of permissions assigned to a user that would allow them to edit their own login identities could result in that user being granted elevated permissions, up to and including system administrator access. This issue affects instances using LDAP authentication with self-service login editing enabled.

    Auth & access Server

    7.7 HIGH 0.4% exploit odds No fix listed
  17. CVE-2026-96414

    In affected versions of Octopus Server, insufficient integrity protection of authentication cookies, combined with incorrect validation of permissions assigned to a user that allowed them to view users or audit events, could result in the user escalating their privileges to those of an Administrator.

    Auth & access Server

    8.7 HIGH 0.2% exploit odds No fix listed
  18. CVE-2026-126570

    Padloc 4.0.0 before 4.3.1 contains a prototype pollution vulnerability that allows SCIM token holders to modify Object.prototype by sending crafted SCIM PATCH paths to ScimServer._handleScimUsersPatch(). Attackers can supply paths like __proto__.x or constructor.prototype.x passed to setPath() to pollute the shared server process, disrupting requests for all other organizations.

    Other Server

    7.0 HIGH 0.4% exploit odds Fix listed
  19. CVE-2026-82391

    The HTTP/2 front-end of the Zephyr HTTP server aliased connection receive state as a scratch output. In subsys/net/lib/http/http_server_http2.c, handle_http2_static_fs_resource() passed &client->data_len as the file_size out-parameter of http_server_find_file(). client->data_len is the count of unprocessed bytes remaining in the fixed-size per-connection receive buffer client->buffer[CONFIG_HTTP_SERVER_CLIENT_BUFFER_SIZE] (256 bytes by default), an invariant every frame handler and the socket receive path rely on. Serving any static file therefore replaced that bounded value with the file's on-disk size, and nothing resets it afterwards. The defect is reached by an unauthenticated HTTP/2 GET for any file under the web root, in applications that register a static-filesystem resource (HTTP_RESOURCE_TYPE_STATIC_FS) with CONFIG_FILE_SYSTEM=y; CONFIG_HTTP_SERVER_VERSION_2 is enabled by default and no TLS or credentials are required on this path. Once client->data_len exceeds the buffer size, the frame dispatch loop in subsys/net/lib/http/http_server_core.c keeps parsing past the end of the received data, and the peer controls the bytes at client->cursor, so it can choose which fabricated frame the state machine consumes next by appending bytes after its request. The inflated length defeats the only guards on the buffer. parse_http_frame_header() and the per-frame handlers read and skip up to a 24-bit frame length beyond the buffer (out-of-bounds read); the compaction memmove(client->buffer, client->cursor, client->data_len) at the end of request handling copies the file-size number of bytes into the 256-byte buffer, overflowing the rest of struct http_client_ctx — including the current_detail/current_stream pointers, the parser_settings function-pointer table and the inactivity_timer work handler — and the adjacent client contexts in static memory; and the subsequent zsock_recv(client->fd, client->buffer + client->data_len, sizeof(client->buffer) - client->data_len, 0) underflows its size argument, writing attacker-supplied data of attacker-chosen length out of bounds. The impact is remote memory corruption in the server's single address space: at minimum a crash or hang of the device, and plausibly control-data overwrite leading to code execution. The HTTP/1 and HTTP/3 static-filesystem handlers already used a local variable and are unaffected; the fix makes the HTTP/2 handler use a local size_t file_size as well.

    Memory safety Server

    9.1 CRITICAL 0.8% exploit odds Fix listed
  20. CVE-2026-77685

    The RFCOMM multiplexer control-channel handler in subsys/bluetooth/host/classic/rfcomm.c computed the echo length for a BT_RFCOMM_TEST command as buf->len - 1 and passed it to rfcomm_send_test(), whose length parameter is a uint8_t. A malformed but FCS-valid UIH frame on DLCI 0 can leave buf->len == 0 after rfcomm_handle_msg() pulls the two-byte MCC header, so buf->len - 1 underflows and narrows to 255. rfcomm_send_test() then copies 255 bytes out of a receive buffer that holds no remaining valid data, and appends them to an outgoing L2CAP PDU allocated with only CONFIG_BT_L2CAP_TX_MTU (253 by default for CONFIG_BT_CLASSIC) bytes of tailroom. The source read runs past the end of the ACL receive buffer into adjacent buffers of the same net_buf pool, and the destination copy overruns the transmit buffer by about eight bytes; net_buf_add_mem() performs no runtime bounds check in ordinary builds, where the underlying __ASSERT_NO_MSG() is compiled out. The trigger is a single five-byte RFCOMM frame on the multiplexer control channel, which is processed as soon as the L2CAP channel for PSM 3 is established — before any DLC exists and independent of RFCOMM session state. bt_rfcomm_init() registers that L2CAP server with .sec_level = BT_SECURITY_L1, which l2cap_br_conn_security() accepts without any link key from a peer that does not claim host Secure Simple Pairing support, so an unpaired BR/EDR device in radio range of a connectable target with CONFIG_BT_RFCOMM enabled (SPP, HFP, HSP, GOEP and similar profiles all enable it) can reach the defect. The resulting 255-byte TEST response is transmitted back to the attacker, disclosing roughly 255 bytes of adjacent stack/pool memory — including the contents of neighbouring receive buffers, which an attacker can prime with earlier packets — and the accompanying out-of-bounds write corrupts memory following the transmit buffer, which can crash the Bluetooth host. The request is trivially repeatable, so both the disclosure and the corruption can be driven at will. Two fixes are needed, and the first on its own does not close the out-of-bounds write. Fix 1 (0040ef781e1d, #115768) strips the FCS byte in rfcomm_recv() and echoes buf->len, rejecting anything over UINT8_MAX, which removes the underflow and the over-read. But rfcomm_make_uih_msg() still allocates the response with bt_l2cap_create_pdu() and never compares the requested length with the buffer's tailroom, so a well-formed TEST command carrying a pattern of about 248 bytes or more still builds a response (3-byte frame header, 2-byte message header, pattern, FCS) larger than the 253 bytes available. A pattern that long can only be received when the RFCOMM L2CAP receive MTU (CONFIG_BT_RFCOMM_L2CAP_MTU, which defaults to CONFIG_BT_BUF_ACL_RX_SIZE) exceeds CONFIG_BT_L2CAP_TX_MTU. The plain BR/EDR defaults (200 against 253) cannot reach it, but from v4.3.0 enabling CONFIG_BT_GOEP raises CONFIG_BT_BUF_ACL_RX_SIZE to 264 (265 from v4.4.0), so GOEP builds with only fix 1 applied still overrun the transmit buffer by up to eight bytes. This includes v4.3.2, the last v4.3 release, which carries fix 1 but will not receive fix 2. Fix 2 (214530895dd3, #118293) checks the tailroom on every RFCOMM PDU allocation and closes this residual write.

    Memory safety Server

    8.3 HIGH 0.4% exploit odds Fix listed
  21. CVE-2026-125881

    Server-Side request forgery (SSRF) vulnerability in N-able N-central allows Server Side Request Forgery. This issue affects N-central: before 26.4.1.

    Disclosure Server

    9.3 CRITICAL 0.5% exploit odds No fix listed
  22. CVE-2026-121889

    Adobe Connect is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed.

    Disclosure Server

    10.0 CRITICAL 0.9% exploit odds No fix listed
  23. CVE-2026-121356

    Adobe Connect is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed.

    Disclosure Server

    10.0 CRITICAL 0.9% exploit odds No fix listed
  24. CVE-2026-92544

    SQL injection in the LLM usage counters of Kong Gateway Enterprise and Kong AI Gateway may allow a client to execute arbitrary SQL against the Kong database via a crafted model name.

    Injection Server

    8.7 HIGH 0.3% exploit odds No fix listed
  25. CVE-2026-120824

    A use-after-free in the time-series collection component of MongoDB Server can occur when the server validates a time-series bucket document during a write. The condition can be caused by an authenticated user with privileges to write bucket documents directly, and may result in the server terminating unexpectedly or, under certain conditions, arbitrary code execution in the context of the server process.

    Memory safety Server

    8.7 HIGH 0.6% exploit odds No fix listed
  26. CVE-2026-120825

    An authorization weakness in the aggregation framework of MongoDB Server may allow an authenticated user holding only basic database privileges to read the contents of collections in a database for which they have not been granted read access. The privilege evaluation performed while a view definition is validated does not cover a nested portion of the supplied pipeline, so the resulting view returns data the user is otherwise refused. This may result in unintended access to data, including stored authentication material.

    Auth & access Server

    7.1 HIGH 0.4% exploit odds No fix listed
  27. CVE-2026-120826

    An authorization flaw in the aggregation and view-definition handling of sharded deployments may allow a user holding only basic read-write privileges on a single database to define a view whose underlying processing is not fully subjected to privilege checking. Reading that view may result in unintended access to data belonging to other databases held on the same shard.

    Auth & access Server

    7.1 HIGH 0.4% exploit odds No fix listed
  28. CVE-2026-120828

    A replica-set database server node does not limit or reclaim internal wait records created while handling a client-supplied read option that names a point in time the node will never reach. A party with network access and no credentials can cause these records to accumulate without bound and persist after the requests end, which may make the server run out of memory and become unavailable.

    Denial of service Server

    8.7 HIGH 0.5% exploit odds No fix listed
  29. CVE-2026-120821

    A use-after-free in the aggregation framework of MongoDB Server can occur when certain expressions are evaluated in an aggregation sub-pipeline. The condition can be caused by an authenticated user with read privileges, and may result in the server terminating unexpectedly.

    Memory safety Server

    7.1 HIGH 0.4% exploit odds No fix listed
  30. CVE-2026-120822

    MongoDB Server may omit an authorization check on the resource that a replication-related administrative command actually targets, because that check is conditioned on a value taken from the client's own request. A user holding backup and restore privileges may therefore read and relocate collections outside the set that user is permitted to access. This may result in unintended access to data and unintended changes to the collection catalog.

    Auth & access Server

    8.6 HIGH 0.3% exploit odds No fix listed
  31. CVE-2026-120823

    A missing authorization check in the aggregation framework of MongoDB Server may allow a user holding any valid credentials, including an account with no assigned roles, to read deployment-wide query configuration data that is otherwise restricted to a cluster-level privilege. This may result in unintended access to configuration and schema information.

    Auth & access Server

    2.3 LOW 0.3% exploit odds No fix listed
  32. CVE-2026-120817

    A race condition in the schema validation component of MongoDB Server can occur when concurrent writes are checked against a collection validator that uses geospatial query operators. The condition can be caused by an authenticated user with write privileges, and may result in the server terminating unexpectedly.

    Other Server

    7.1 HIGH 0.3% exploit odds No fix listed
  33. CVE-2026-120818

    A use-after-free weakness in MongoDB Server's server-side JavaScript support for aggregation may allow a stale reference to previously freed process memory to be read and returned. An authenticated user with minimal or no assigned roles can trigger this condition over the normal network protocol by submitting a single crafted aggregation request, with no additional privileges or non-default configuration. Successful triggering this issue may result in adjacent process memory contents being returned, including data that undermines memory-layout randomization, and may in some cases affect server availability.

    Memory safety Server

    7.1 HIGH 0.4% exploit odds No fix listed
  34. CVE-2026-120820

    MongoDB Server maintains an in-memory table of per-namespace statistics for operations that carry encrypted-field information. Entries are created for any namespace supplied in a request, with no limit on the number of entries and no way to remove entries that never corresponded to a real collection. A user with basic read privileges who repeatedly issues ordinary read commands referencing arbitrary namespace names may cause the server process to retain steadily increasing amounts of memory and to slow down on the affected code path; the memory is reclaimed only by restarting the process.

    Denial of service Server

    5.3 MEDIUM 0.4% exploit odds No fix listed
  35. CVE-2026-120819

    A memory-management flaw in the server-side JavaScript execution component of MongoDB Server can allow an authenticated user holding only read privileges to cause the server to access memory that has already been released. By submitting a specially crafted database command that runs user-supplied JavaScript, the user can cause a bounded amount of adjacent process memory to be returned in the command's result. This results in the user obtaining information they are not authorized to access. Integrity and availability are not affected.

    Memory safety Server

    5.3 MEDIUM 0.4% exploit odds No fix listed
  36. CVE-2026-120816

    A user with basic read-tier database privileges can use an option on a server-side data-change notification feature to receive the contents of certain restricted internal collections that the same user is refused on a direct read. The privilege check for the notification feature is derived only from the target namespace and does not account for the option, so no additional permission is required. This may result in unintended access to data stored in those internal collections.

    Auth & access Server

    2.3 LOW 0.3% exploit odds No fix listed
  37. CVE-2026-118383

    A use-after-free in the replication component of MongoDB Server can occur when a newly elected replica set primary completes catch-up. The condition can be caused by requests that do not require authentication, and may result in the server terminating unexpectedly or, under certain conditions, arbitrary code execution in the context of the server process. Replica set members are affected, including the shard and config server replica set members of sharded clusters; standalone mongod instances are not.

    Memory safety Server Mongodb

    9.5 CRITICAL 0.7% exploit odds Fix listed
  38. CVE-2026-120814

    An improper privilege management issue in the sharding subsystem of MongoDB Server may allow a user holding certain shard-level administrative privileges to cause persisted internal coordination state to be reprocessed with elevated internal authority. Because that state is trusted rather than re-validated, operations may be carried out beyond the user's authorized scope, including changes to cluster-wide security configuration. Successful triggering this issue requires an authenticated session directly against a cluster member and can result in unauthorized access to and modification of data across the cluster.

    Other Server

    7.5 HIGH 0.4% exploit odds No fix listed
  39. CVE-2026-120815

    An incorrect authorization check in the MongoDB Server authorization subsystem may allow an unauthenticated party with local host access to obtain administrative privileges on a database server that has authorization enabled. This may result in unintended access to stored data and credentials, unintended modification of data, and loss of availability of the server.

    Auth & access Server

    8.6 HIGH 0.1% exploit odds No fix listed
  40. CVE-2026-120809

    A use-after-free read issue exists in MongoDB’s SBE (Slot-Based Execution) engine when processing aggregation pipelines with $unwind on time-series collections. An internal error in state-preservation logic can cause a value still referenced by downstream stages to have its underlying memory freed prematurely. An authenticated user can craft an aggregation pipeline under specific conditions to trigger this condition, potentially reading recycled server heap memory in query results or crashing the server. This issue is only triggerable when a non-default server parameter related to the SBE engine is enabled.

    Memory safety Server

    6.1 MEDIUM 0.4% exploit odds No fix listed
  41. CVE-2026-120810

    An issue in MongoDB server’s aggregation framework allows an authenticated user with read privileges to cause a denial of service by sending specially crafted aggregate commands using an internal expression. Despite its internal naming, this expression is registered as accessible to any authenticated client. By supplying crafted input parameters across multiple concurrent connections, each evaluation triggers unbounded memory allocations with no per-expression memory limits enforced. This can exhaust available server memory and cause the mongod process to be terminated by the operating system’s out-of-memory killer.

    Denial of service Server

    7.1 HIGH 0.3% exploit odds No fix listed
  42. CVE-2026-120811

    A use-after-free issue exists in the MongoDB server’s classic query engine plan cache. Under certain query conditions, an unowned reference to data from an earlier command can be retained in cached plan statistics. After the originating memory is freed, a subsequent diagnostic command serializing those statistics can read freed heap memory, potentially returning sensitive server process memory contents to the authenticated client. Under certain heap reuse conditions, this may also cause the server to crash.

    Memory safety Server

    6.0 MEDIUM 0.3% exploit odds No fix listed
  43. CVE-2026-120812

    An issue in MongoDB Server's query processing component allows an authenticated user with read privileges to cause a denial of service. Uncontrolled recursion in an internal query compilation component can lead to stack exhaustion and server process termination when processing certain queries against time-series collections.

    Denial of service Server

    6.0 MEDIUM 0.3% exploit odds No fix listed
  44. CVE-2026-120813

    An issue in MongoDB Server's client-side field-level encryption (CSFLE) schema processing component allows encryption metadata to be silently dropped during schema parsing under certain conditions. A party who can deliver a specially crafted schema to a user's CSFLE client may cause sensitive data intended for encryption to be stored in plaintext, bypassing confidentiality protections. Exploitation requires the ability to deliver the malicious schema to the user's client, such as through a man-in-the-middle position or an untrusted server.

    Other Server

    8.2 HIGH 0.2% exploit odds No fix listed
  45. CVE-2026-120803

    A use-after-free issue exists in MongoDB’s SBE (Slot-Based Execution) implementation of a window function accumulator used by certain $setWindowFields aggregation pipelines. Under specific conditions, the accumulator can retain a dangling pointer to memory that has since been freed. When this stale pointer is later dereferenced during serialization of the carried-forward value, it can result in a heap out-of-bounds read that may expose adjacent heap contents and crash the mongod server. An authenticated user with readWrite privileges on a database can trigger this issue by crafting a specific aggregation pipeline.

    Memory safety Server

    7.1 HIGH 0.4% exploit odds No fix listed
  46. CVE-2026-120805

    In MongoDB Server, an authenticated user with insert privileges on a collection could craft a command with specially constructed encryption-related parameters to redirect internal Queryable Encryption metadata writes to metadata belonging to other encrypted collections within the same database. The server’s authorization layer validated only the user-facing target collection namespace, while subsequent internal writes derived from client-supplied parameters were performed with elevated internal privileges, bypassing the original caller’s permission scope. This could allow unauthorized writes into another collection’s Queryable Encryption metadata, potentially corrupting encrypted index state and compaction operations.

    Auth & access Server

    2.3 LOW 0.2% exploit odds No fix listed
  47. CVE-2026-120806

    A flaw in MongoDB Server's user management commands may lead to incomplete cleanup of role authorization data when roles are dropped from a database. Due to incorrect internal query predicates, the drop operation removes role definitions but fails to remove stale references in user and role documents. If a role with the same name is subsequently recreated with different privileges, previously associated users may silently inherit the new role's privileges without an explicit grant or corresponding audit event. Exploitation requires authenticated access with database administrative privileges on the target database.

    Other Server

    7.0 HIGH 0.2% exploit odds No fix listed
  48. CVE-2026-104060

    Worklenz before 3.3.0 contains an SQL injection vulnerability in the reporting members endpoints that allows authenticated attackers to read arbitrary database contents by injecting SQL through the projects and status parameters. Attackers can send crafted values to POST /api/v1/reporting/members/all or GET /api/v1/reporting/members/export, which are interpolated unparameterized into IN clauses in getTeamMemberInsightData, and use time-based blind techniques to extract data across tenants, including user password hashes.

    Injection Server

    7.1 HIGH 0.3% exploit odds Fix listed
  49. CVE-2026-125334

    Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.3, a forge.tls client can pass a handshake record to tls.handleHandshake() while the connection has no session, including after a close_notify alert, after the application calls close(), or before handshake() is called. The handler dereferences c.session.md5 before dispatching the message, causing a TypeError to propagate from connection.process(). A malicious server or on-path attacker can deliver the record, including after a reset when the connection uses no encryption, and terminate a Node.js process if the application does not catch the exception. forge.tls servers are not affected, and there is no confidentiality or integrity impact. This issue is fixed in version 1.4.3.

    Memory safety Server Digitalbazaar Forge

    5.9 MEDIUM 0.3% exploit odds Fix listed
  50. CVE-2026-125332

    Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.3, a forge.tls client accepts a ServerHello compression_method that it did not offer. When the client later handles ServerHelloDone, tls.createConnectionState() rejects the unsupported compression algorithm by throwing an Error that propagates from connection.process(). A malicious server or an on-path attacker can alter the unauthenticated ServerHello compression byte before the server Finished message and terminate a Node.js process when the application does not catch the exception. The affected client paths include direct forge.tls use, forge.tls.wrapSocket, and forge.http; forge.tls servers are not affected, and the issue has no confidentiality or integrity impact. This issue is fixed in version 1.4.3.

    Other Server Digitalbazaar Forge

    5.9 MEDIUM 0.5% exploit odds Fix listed

The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.