Just published.
The newest CVEs, straight from CVE.org and NVD.
-
CVE-2026-120238
A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This affects the function sub_4162A8 of the file /bin/ioos of the component ovpn_file Handler. Such manipulation of the argument file_id leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-120231
A vulnerability was determined in WAVLINK WN553X1-B V260403_2.0.0. The affected element is the function sub_416568 of the file /bin/ioos of the component OpenVPN CLI Handler. This manipulation of the argument file_id causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure.
-
CVE-2026-120230
A vulnerability was found in WAVLINK WN701AE 260105. Impacted is the function del_vlan_group of the component ioos Web Backend. The manipulation of the argument vlan_name results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.
-
CVE-2026-120227
A vulnerability was detected in WAVLINK WN701AE M01AE_V260105. This affects the function del_staticrule of the file static_route_setting.sh of the component ioos Web Backend. Performing a manipulation of the argument rule_name results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.
-
CVE-2026-120189
A vulnerability was identified in D-Link DIR-505 1.10B02. Affected is the function save_upload_file/mp_upload_file of the file /usr/bin/tftpd of the component TFTP Upload Filename Handler. The manipulation leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.
-
CVE-2026-63201
Netopeer2 is a server for implementing network configuration management based on the `NETCONF` Protocol. In affected versions, a low-privileged authenticated `NETCONF` user can remotely crash `netopeer2-server` by sending a `get RPC` with an invalid `subtree filter` whose text contains format specifiers. In `src/netconf.c`, `np2srv_rpc_get_cb()` sends the invalid value through `ERR()` to `np2log_printf()`, where `vsnprintf()` first formats the message safely. In `src/log.c`, that already formatted buffer is subsequently passed to `np2log()` as the format string itself, causing `vsyslog()` to interpret attacker-controlled percent sequences and read invalid pointer arguments. The reported denial of service was confirmed on version 2.8.7 using `NETCONF`-over-SSH and AddressSanitizer; reliable remote code execution was not confirmed. `The advisory identifies 2.8.8 as patched`; repository comparisons verify the fix in public release 2.8.21. The affected/fixed boundary remains unresolved because no public 2.8.8 tag was located, which does not establish the status of an untagged 2.8.8 build.
-
CVE-2026-116248
In pgAdmin 4 server mode only administrators are meant to share a server with all users; the server dialog shows the Shared switch only to them. The create and update endpoints of the server API, however, stored the "shared" flag and shared username they were sent, so any user able to register a server could share one with every other user. The servers.json import had a similar gap: a non-administrator's "Shared" entries were removed only after validation, so a file that also held an invalid entry could create a shared server. A shared server carries no credentials, so this gives no direct access. It lets a user plant a server, named to look trusted, in every other user's tree and pointing at a host the user controls; anyone who then connects to it presents their own database password to that host. The fix refuses a non-administrator's request that would share a server with HTTP 403, prunes a non-administrator's shared entries from a servers.json import before validating it, and warns at startup about servers shared earlier by non-administrators. This issue affects pgAdmin 4: before 9.19.
-
CVE-2026-119760
sniproxy through 0.7.0 contains a NULL pointer dereference vulnerability in resolv_cancel() that allows remote unauthenticated attackers to crash the daemon by sending overlong hostnames. Attackers can send a 254 or 255 character TLS SNI name or HTTP Host header matching a wildcard backend, then close the connection to terminate the proxy.
-
CVE-2026-119424
OPNsense core before 26.7.8 contains a configuration line injection vulnerability that allows authenticated users with wireless-edit privilege to inject directives by embedding CR/LF characters in WPA fields. Attackers can place newlines in wpa.identity, wpa.passphrase, or RADIUS shared secrets to append arbitrary wpa_supplicant or hostapd directives loaded by root-run daemons.
-
CVE-2026-119425
OPNsense core 26.1.6 through 26.7.7 contains an authentication bypass vulnerability in the captive portal roaming feature that lets unauthenticated attackers hijack authorized client sessions by spoofing unauthenticated MAC-to-IP observations. Attackers on the same Layer-2 segment can send forged gratuitous ARP replies binding their IP to a victim's MAC, gaining portal access with traffic attributed to the victim.
-
CVE-2026-82104
In Teltonika Networks RUTOS devices running versions from 7.22 through 7.24.2 and TSWOS devices running versions 1.9 through 1.10, a vulnerability exists whereby an unauthenticated user can directly call LUA functions, bypassing validations that might be called under normal API requests. Due to those requests not following proper flows, this could lead to OS command execution. This issue affects RUT: from 7.22 through 7.24.2; RUTX: from 7.22 through 7.24.2; RUTM: from 7.22 through 7.24.2; RUTC: from 7.22 through 7.24.2; ATRM: from 7.22 through 7.24.2; TAP: from 7.22 through 7.24.2; CAP: from 7.22 through 7.24.2; OXA: from 7.22 through 7.24.2; DAP: from 7.22 through 7.24.2; TRB: from 7.22 through 7.24.2; OTD: from 7.22 through 7.24.2; EBG: from 7.22 through 7.24.2; SWM: from 1.9 through 1.10; TSW: from 1.9 through 1.10.
-
CVE-2026-107060
Insecure permissions in Tailscale versionCode 297862600 allows unauthorized attackers to make arbitrary changes to another user's VPN configurations and preferences.
-
CVE-2026-115795
P-Net before 1.0.3 does not check that a complete block header is present in the received data before reading the next block in DCP Set and Identify requests. If the last block ends at the end of the receive buffer, the block length of the following block is read past the end of the buffer. In addition, a DCP Set block with a length smaller than the two-byte block qualifier makes the length underflow, so the block is processed with a length of 65534 bytes. This can cause a crash (denial of service) or disclose a small amount of memory content. Requires ADJACENT network access.
-
CVE-2026-111730
P-Net before 1.0.3 does not validate the LengthPeerStationName field of a CheckPeers block in get_check_peer(). The received length (up to 255) was used to copy data into the 241-byte peer station name buffer and to place the terminating NUL byte, so a crafted block writes up to 15 bytes past the end of the buffer. This can lead to a crash (denial of service) or potentially arbitrary code execution. Requires establishment of session that needs ADJACENT network access.
-
CVE-2026-111734
P-Net before 1.0.3 does not validate the length of a received Ethernet frame in pf_eth_recv() before reading the EtherType, any VLAN tags and the PROFINET FrameID. The VLAN tag loop had no upper bound, so a truncated frame, or a frame consisting only of VLAN tags, makes the function read past the end of the receive buffer. This can cause a crash (denial of service) or disclose memory content.
-
CVE-2026-107039
Insecure permissions in the ActivityMain component of M66B/Marcel Bokhorst NetGuard no-root firewall versionCode 2026080101/versionName 2.337 allows unauthorized attackers to arbitrarily force a device reset or Denial of Service (DoS).
-
CVE-2026-93009
A flaw was found in dnsmasq. The DHCPv6 client hostname parser can read one byte past the end of a crafted FQDN option because it checks the next label length before confirming the pointer is still inside the option. An attacker on the local network can trigger this with a single DHCPv6 packet. The extra byte is not returned to the client or logged, and no crash has been demonstrated.
-
CVE-2026-93010
A flaw was found in dnsmasq. When DHCP leasequery is enabled without listing allowed source addresses, the server does not check who sent the query. A host on the local network can request DHCP lease records and learn assigned addresses, MAC addresses, hostnames, and related lease metadata. The feature is off unless an administrator turns it on.
-
CVE-2026-79589
The WIFI4 N300 router (Model: T1 Pro) v1.0.0 by U-speed contains an insecure access control flaw that allows an attacker to gain unauthenticated root shell. The vulnerability is caused by the exposure of the UART debugging interface having a lack of authentication, authorization and access control functionality. Once the interface is soldered and connected to the attacker, they gain root privilege to the system.
-
CVE-2026-119053
lwIP 2.0.0 through 2.2.1 built with the SNMP agent contains an out-of-bounds read vulnerability in snmp_pbuf_stream_writeto() that bounds copies by pbuf->len instead of remaining bytes. Remote unauthenticated attackers knowing the read community can send fragmented SNMP requests to receive adjacent receive-buffer or pool memory echoed in responses.
-
CVE-2026-97854
Yamaha wireless LAN router NWR100 provided by Yamaha Corporation contains an OS command injection vulnerability. Arbitrary OS commands may be executed by sending a specially crafted request to the affected product.
-
CVE-2026-97860
YMS-VPN8 and YMS-VPN8-CP provided by Yamaha Corporation register Windows services with unquoted file paths. A user who has write permissions on the system drive may be able to execute arbitrary code with SYSTEM privileges.
-
CVE-2026-109822
Yamaha wireless LAN router NWR100 provided by Yamaha Corporation contains an issue with insecure storage of sensitive information. Configuration files generated by the CONFIG file export function may be read by an unauthenticated attacker.
-
CVE-2026-118579
A weakness has been identified in D-Link DIR-505 1.10B02. The impacted element is the function main of the file /secmark1524.cgi of the component Web Management CGI. This manipulation of the argument accu/pass/code/hash/cmds causes backdoor. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.
-
CVE-2026-76418
A vulnerability in the Remote Access SSL VPN service of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to logic errors when secondary authentication is configured on a tunnel group. An attacker could exploit this vulnerability by sending a crafted request when connecting to the SSL remote access VPN. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
-
CVE-2026-82962
ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet's interface is the Ethernet interface. A packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards. Because net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes — 18 with VLAN — of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer's payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt->buffer) is large enough and otherwise falls back to a separate header fragment.
-
CVE-2026-106079
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in AccessManager in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with config-write privileges to achieve arbitrary command execution as root in the YANG configuration.
-
CVE-2026-103410
An Integer Overflow vulnerability in the DPI certificate scanner in Juniper Networks Session Smart Router allows an unauthenticated remote attacker to cause a denial of service via a specially crafted TLS server certificate.
-
CVE-2026-103411
An Integer Underflow vulnerability in DhcpMessageDecoder in Juniper Networks Session Smart Router allows an attacker with local network access to cause information disclosure and a denial of service via a malicious DHCP reply.
-
CVE-2026-103409
A Missing authentication for critical function vulnerability in Juniper Networks Session Smart Router allows an unauthenticated network-based attacker to obtain administrative privileges by passing crafted URL parameters to an insecure endpoint running as root. Note that this vulnerability can only be exploited prior to the device being onboarded to Mist/Conductor. The issue can no longer be exploited once a device is onboarded to Mist/Conductor.
-
CVE-2026-103407
An Improper Limitation of a Pathname to a Restricted Directory vulnerability in ConfigDirector in Juniper Networks Session Smart Router and Session Smart Conductor allows an authenticated REST user to read, overwrite, or delete arbitrary certificate and key files on the host filesystem via the certificate and private-key REST API.
-
CVE-2026-103408
A Stack Buffer Overflow vulnerability in the DHCP client in Juniper Networks Session Smart Router allows an unauthenticated attacker on the local network to achieve remote code execution via a malicious DHCP reply.
-
CVE-2026-103404
An Incorrect Permission Assignment for Critical Resource vulnerability in RoutingManager in Juniper Networks Session Smart Conductor allows a local user to access sensitive routing credentials via triggering processes that write to the /tmp directory.
-
CVE-2026-103405
An Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in the web server in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker to inject arbitrary HTTP headers via unsanitized request body parameters.
-
CVE-2026-103401
An Improper Link Resolution Before File Access ('Link Following') vulnerability in the unauthenticated web server handlers in Juniper Networks Session Smart Router and Session Smart Conductor allows a local unprivileged user to overwrite arbitrary files as root via unauthenticated API endpoints. This vulnerability can be exploited on Mist-managed routers and on unmanaged Routers that have not yet been onboarded to a Conductor. Routers already managed by Conductor are not affected.
-
CVE-2026-103402
An Insufficient Verification of Data Authenticity vulnerability in PCLI in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with write access to the model cache directory to execute arbitrary code and escalate privileges via the processing of unverified cache files.
-
CVE-2026-103403
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in AccessManager in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker to perform arbitrary file deletion and arbitrary command execution via the deletion of an audit rule.
-
CVE-2026-103394
An Improper Initialization vulnerability in the SSR software in Juniper Networks Session Smart Router allows an attacker to decrypt traffic or cause a denial of service via security policy assignment.
-
CVE-2026-103400
An Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in the ember service in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with local access to unmount arbitrary filesystems or cause a denial of service via the creation of specially named directories and a service restart.
-
CVE-2026-103391
An Out-of-bounds Write vulnerability in the SSR TCP proxy/optimization path in Juniper Networks Session Smart Router allows an attacker to corrupt forwarded packet data and potentially cause a data-plane crash via a transit TCP packet with a crafted TCP option length.
-
CVE-2026-103392
An Out-of-Bounds Write vulnerability in the TCP header processing in Juniper Networks Session Smart Router allows an attacker to corrupt TCP payload data and potentially cause session desynchronization via a transit TCP packet with an oversized SACK option length.
-
CVE-2026-103393
An Out-of-Bounds Read vulnerability in the VRRP implementation in Juniper Networks Session Smart Router allows an L2-adjacent attacker to read stale memory contents or cause a system fault via a specially crafted VRRPv3 advertisement.
-
CVE-2026-103390
An Out-of-Bounds Read vulnerability in the HttpParser component in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker to cause a denial of service via a specially crafted HTTP request.
-
CVE-2026-115402
OpenVPN ovpn-dco-win 0.6.5 through 2.8.13 allows unprivileged local users to cause a denial of service (system crash) via a race condition in the TCP connect path.
-
CVE-2026-104384
Insufficiently Protected Credentials in tunnel gateway and provisioning interfaces in EagleCloud Aquila versions through 2.6.7.2 on on-premises platforms allows unauthenticated remote attackers to escalate privileges via authentication abuse to access the access keys, secret keys, and deployment secrets
-
CVE-2013-20007
Linksys WAG200G through 1.01.06 contains an OS command injection vulnerability that allows authenticated attackers to execute commands by injecting backtick-delimited input into the timer_interval parameter. Attackers can send a crafted POST request to setup.cgi to start telnetd or download and run a backdoor, gaining full device control.
-
CVE-2013-20008
Linksys WAG200G through 1.01.06 contains a weak password change mechanism that allows attackers to change the administrator password without supplying the current password. Attackers with access to an authenticated administrator browser session can set a new password to lock out the legitimate administrator and take persistent device control.
-
CVE-2013-20009
Linksys WAG200G through 1.01.06 contains a stored cross-site scripting vulnerability that allows authenticated attackers to inject scripts via the policy_name parameter in setup.cgi. Attackers can save a malicious policy name from the AccessRes.htm page that executes in administrators' browsers when viewing the Status > Wireless page.
-
CVE-2026-116677
OpenWISP Controller is a network and WiFi controller for provisioning, configuration management, updates, and PKI management. From 1.0.0 until 1.3.2, the GET /api/v1/controller/ca/<integer-id>/crl endpoint allows an authenticated organization manager with CA view permission to retrieve another organization's certificate revocation list by requesting its sequential CA identifier. CrlDownloadView.retrieve resolves the CA directly instead of using the organization-scoped object retrieval enforced by FilterByOrganizationManaged, bypassing the endpoint's intended authorization boundary. The response can disclose CA issuer information and revoked certificate serial numbers, but it does not expose CA private keys or allow modification. This issue is fixed in version 1.3.2.
-
CVE-2026-102814
An authentication weakness exists in the TP-Link TDDP v2 service of TP-Link RE305 V3. TDDP v2 uses a fixed and derivable cryptographic key, which may allow an unauthenticated attacker on the same local network to forge protocol packets and access privileged TDDP operations, including functionality that can lead to operating-system command execution when the TDDP service is running and accessible. Successful exploitation may allow an unauthenticated attacker on the same local area network to execute arbitrary system commands with root privileges.
The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.