CVE-20XX-?
agent?

Just published.

The newest CVEs, straight from CVE.org and NVD.

767 CVEs · updated 2026-11-19 11:54 UTC

Reset all
  1. CVE-2026-67444

    Hubleys is a dashboard for self-hosted services. Prior to version 0.5.2, any authenticated (non-admin) Hubleys user can upload a file with an arbitrary extension as their dashboard "background image," and the server will later serve that file back with a Content-Type derived straight from the attacker's chosen extension - so uploading an .html file gets it served as text/html. Because the endpoint that serves it returns a manually-constructed response rather than going through SvelteKit's normal page-rendering pipeline, the app's configured Content-Security-Policy never gets attached to it either, so a script embedded in the upload runs unrestricted. This issue has been patched in version 0.5.2.

    XSS Device Knrdl hubleys-dashboard

    7.1 HIGH 0.3% exploit odds Fix listed
  2. CVE-2026-62976

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the RAMFS-backed FILE object implementation stores appended records as NUL-terminated strings, but its record-counting logic later walks the buffer as if an additional terminating empty record were present. As a result, two consecutive AtomicWriteFile(record-access) append requests can cause record_count() to call bacnet_strnlen() on a pointer that is already one byte past the end of the heap allocation. This issue has been patched in versions 1.5.1 and 1.6.0.

    Memory safety Device

    8.7 HIGH 0.3% exploit odds Fix listed
  3. CVE-2026-62977

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the BACnet FILE object implementation allows remote WriteProperty(PROP_FILE_SIZE) requests to change the size of a stream-access FILE object without checking whether that FILE is marked Read_Only. When the FILE backend is RAMFS, enlarging the file only performs realloc() and updates the stored size; the newly exposed tail region is not initialized before later reads. As a result, a remote client can enlarge a read-only RAMFS-backed stream-access FILE and then immediately retrieve the newly exposed region with AtomicReadFile(stream-access). Depending on the allocator and build configuration, the returned data may contain sanitizer fill bytes, stale heap contents, or other unintended process memory. Shrinking the file through the same path can also remotely truncate content that was intended to be read-only. This issue has been patched in versions 1.5.1 and 1.6.0.

    Auth & access Device bacnet-stack

    6.9 MEDIUM 0.2% exploit odds Fix listed
  4. CVE-2026-64675

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5 and 1.5.1, a single unauthenticated BACnet/IP UDP datagram (port 47808) triggers an out-of-bounds read in xy_color_decode() (src/bacnet/lighting.c), reachable pre-authentication through two default-registered service handlers: the UnconfirmedRequest WriteGroup service (0x0A) and Confirmed WriteProperty on a BACnetXYColor-typed property. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    5.3 MEDIUM 0.5% exploit odds Fix listed
  5. CVE-2026-62975

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, the RAMFS-backed FILE implementation accepts AtomicWriteFile(record-access) requests that replace existing records with caller-controlled content. If a client replaces a record with shorter data, the backend can shrink the heap allocation and then continue processing with a trailing-copy length derived from the old layout. During that replace path, the RAMFS backend computes the trailing-copy length from the old file layout, then shrinks the heap allocation, and finally uses the stale length in memmove(). As a result, the source range of that memmove() can extend beyond the end of the reallocated heap buffer, producing a heap out-of-bounds read. This issue has been patched in versions 1.5.1 and 1.6.0.

    Memory safety Device bacnet-stack

    6.9 MEDIUM 0.3% exploit odds Fix listed
  6. CVE-2026-102537

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.6, 1.5.2, and 1.6.1, bws_cli_connect() in ports/linux/websocket-cli.c loads the trusted CA cert into the libwebsockets context, then always sets LCCSCF_ALLOW_SELFSIGNED in the connection flags. So lws accepts any self-signed hub certificate, whether or not it chains to the loaded CA. A BACnet/SC node finishes the TLS handshake to a rogue hub that presents a self-signed cert. It then hands the attacker its identity (VMAC, UUID) and all later BACnet traffic. This issue has been patched in versions 1.4.6, 1.5.2, 1.6.1, and 1.7.0.

    Crypto Device

    7.7 HIGH 0.2% exploit odds Fix listed
  7. CVE-2026-102612

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.6, 1.5.2, and 1.6.1, bws_srv_start() in ports/linux/websocket-srv.c builds the libwebsockets server context with a CA certificate loaded but never sets LWS_SERVER_OPTION_REQUIRE_VALID_OPENSSL_CLIENT_CERT, so the hub accepts TLS connections from clients presenting no certificate at all. Any network-reachable host can join the BACnet/SC mesh without credentials. This issue has been patched in versions 1.4.6, 1.5.2, 1.6.1, and 1.7.0.

    Crypto Device bacnet-stack

    8.1 HIGH 0.3% exploit odds Fix listed
  8. CVE-2026-104204

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.6.1, there is a server-side denial-of-service issue affecting the Structured View object implementation. This issue has been patched in versions 1.6.1 and 1.7.0.

    Denial of service Device

    8.7 HIGH 0.5% exploit odds Fix listed
  9. CVE-2026-100403

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.6, 1.5.2, and 1.6.1, the BACnet/SC hub's Linux WebSocket server reassembles fragmented WebSocket messages into a per-connection fragment_buffer. It grows that buffer with realloc() on every non-final frame, with no upper bound. A peer that streams binary continuation fragments and never sets FIN keeps the hub reallocating until the box runs out of memory or the process is OOM-killed. The buffer starts at the maximum legal BVLC-SC NPDU size, but nothing after that ties its growth back to that limit. This issue has been patched in versions 1.4.6, 1.5.2, 1.6.1, and 1.7.0.

    Denial of service Device bacnet-stack

    7.5 HIGH 0.5% exploit odds Fix listed
  10. CVE-2026-97361

    There exists an improper privilege management vulnerability that could cause privilege escalation at the SpaceCom and Space Battery pack SP with WiFi.

    Auth & access Device

    8.5 HIGH 0.1% exploit odds No fix listed
  11. CVE-2026-97357

    An Out-Of-Bounds Write due to missing input validation is possible in the autoprogramming interface of SpaceCom and Space Battery pack with WiFi which could lead to a denial of service of the affected communication device

    Memory safety Device

    6.9 MEDIUM 0.3% exploit odds No fix listed
  12. CVE-2026-95377

    OS command injection in the TFTP provisioning module of Zenitel EdgeAudioClient before 9.6.3.0, and 10.x before 10.1.3.0, on VSFF6, VSFF8, VSFF8MP, VSFF8MN, and VSFT devices allows unauthenticated adjacent attackers to execute arbitrary commands as root via a crafted DHCP option 66 (TFTP Server Name) value supplied by a rogue DHCP server on the same network segment. The DHCP-supplied value is passed to a shell without sanitization. Devices using DHCP, the default configuration, are affected on every boot and lease renewal. The same injection is also reachable via the config_update_tftp_server and sw_update_tftp_server configuration fields by an attacker able to modify the device configuration.

    Injection Device

    9.4 CRITICAL 1% exploit odds No fix listed
  13. CVE-2026-62974

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Denial of service Device bacnet-stack

    8.7 HIGH 0.3% exploit odds Fix listed
  14. CVE-2026-62972

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, lighting_command_decode in src/bacnet/lighting.c decodes its first field with the bounded apdu_size - apdu_len, but every nested decode in the operation switch is called with the original full apdu_size while the read pointer has been advanced to &apdu[apdu_len]. The leaf decoders bound their reads against the size they are told, so they read up to apdu_len bytes past the end of the caller's buffer, resulting in an out-of-bounds read. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    6.9 MEDIUM 0.3% exploit odds Fix listed
  15. CVE-2026-62973

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a remote out-of-bounds read exists in the official BACnet client application apps/readpropm in bacnet-stack commit e2bdbf6. When readpropm sends a legitimate ReadPropertyMultiple request to a malicious BACnet/IP peer, the peer can reply with a malformed but structurally valid ReadPropertyMultiple-ACK that drives the client into a global-buffer-overflow read on the global receive buffer Rx_Buf. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    7.5 HIGH 0.4% exploit odds Fix listed
  16. CVE-2026-58265

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a BACnet/SC peer can trigger a heap out-of-bounds read (up to 3 bytes), pre-authentication, in the BACnet/SC header-option decoder. bvlc_sc_decode_proprietary_option() reads the vendor-id and option-type at fixed offsets [3],[4],[5] before checking the option's declared header length, and the option-list validator never enforces a minimum length for proprietary options. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device bacnet-stack

    6.5 MEDIUM 0.3% exploit odds Fix listed
  17. CVE-2026-52787

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0-rc2, a reachable out-of-bounds write exists when encoding the device.address-binding property. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0-rc2.

    Memory safety Device bacnet-stack

    7.5 HIGH 0.3% exploit odds Fix listed
  18. CVE-2026-52788

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, the bsc_node_parse_urls() function in src/bacnet/datalink/bsc/bsc-node.c contains three distinct bugs when parsing space-separated WebSocket URIs from a BACnet/SC Address Resolution ACK message. Two bugs cause out-of-bounds writes past the utf8_urls[10][129] array in the static BSC_ADDRESS_RESOLUTION structure. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    8.8 HIGH 0.3% exploit odds Fix listed
  19. CVE-2026-52789

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Denial of service Device

    7.5 HIGH 0.3% exploit odds Fix listed
  20. CVE-2026-52790

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, there is a library-level memory safety issue that is reachable from an unmodified official sample server (apps/server-basic/main.c) over BACnet/IP resulting in a stack-use-after-return in writable Device string properties. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    7.5 HIGH 0.4% exploit odds Fix listed
  21. CVE-2026-49341

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, there is a remotely reachable denial-of-service vulnerability in bacnet-stack affecting the default demo server built from the unmodified apps/server/main.c. This issue has been patched in version 1.5.1.

    Denial of service Device

    7.5 HIGH 0.3% exploit odds Fix listed
  22. CVE-2026-49990

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.2 to before 1.4.5, and 1.5.0 to before 1.5.1, a signed fileStartPosition taken from AtomicReadFile and AtomicWriteFile stream-access requests is not validated tightly enough before it reaches the RAM file backends. Practical impact includes: reliable denial of service via process crash, out-of-bounds read that may expose adjacent memory contents, or out-of-bounds write that may corrupt heap memory and destabilize the process. This issue has been patched in versions 1.4.5 and 1.5.1.

    Memory safety Device

    8.6 HIGH 0.3% exploit odds Fix listed
  23. CVE-2026-128907

    Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.

    Auth & access Device

    4.3 MEDIUM 0.2% exploit odds No fix listed
  24. CVE-2026-128908

    OS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.

    Injection Device

    8.8 HIGH 2% exploit odds No fix listed
  25. CVE-2026-128909

    Improper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.

    Crypto Device

    8.8 HIGH 0.1% exploit odds No fix listed
  26. CVE-2026-128910

    Use of hard-coded credentials (CWE-798) on the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an attacker with physical access to the board's serial console to log in as root. The same password hash is present on every unit and uses DES crypt, so the password can be recovered offline from the distributed firmware. No network login service accepts this password by default. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.

    Auth & access Device

    6.8 MEDIUM 0.1% exploit odds No fix listed
  27. CVE-2026-109445

    PLANET GS-5220-8P2T2S (hardware version 3.0) firmware versions before 3.2412b261008 contains a stack-based buffer overflow vulnerability that allows unauthenticated attackers to corrupt stack memory by submitting an oversized webstax_auth HTTP Cookie value that is copied into a fixed-size stack buffer without length validation. Attackers can send a crafted unauthenticated HTTP request with an oversized cookie to overwrite the saved return address and corrupt stack memory, leading to memory corruption and potential denial of service on the device.

    Memory safety Device PLANET Technology Corp. PLANET GS-5220-8P2T2S

    9.3 CRITICAL 0.4% exploit odds Fix listed
  28. CVE-2025-41725

    Affected devices running firmware versions prior to 4.1.0 may crash and become unavailable when receiving specific malformed Bluetooth messages from an unauthenticated attacker.

    Denial of service Device

    6.5 MEDIUM 0.2% exploit odds No fix listed
  29. CVE-2026-75489

    Cudy TR3000 before 2.5.42 contains an insufficient verification of data authenticity vulnerability in the mt_wifi Smart Mesh Technology (SMT) onboarding, which protects messages only with an AES-CBC key derived from public values and a CRC32 check. Adjacent unauthenticated attackers can forge SMT messages in Probe Request vendor IEs carrying an attacker-chosen SSID and pre-shared key, forcing unpaired devices to join attacker-controlled access points.

    Crypto Device

    6.1 MEDIUM 0.2% exploit odds No fix listed
  30. CVE-2026-74911

    Software installed and run as a non-privileged user may conduct improper GPU system calls to the execution of an error path that triggers an OOB read & write. An error can be triggered which causes the index of the array element to be cleaned up by the error path would be outside of the array bounds.

    Memory safety Device

    9.8 CRITICAL 0.4% exploit odds No fix listed
  31. CVE-2026-16664

    MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read. The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices). flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth. This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below.

    Memory safety Device

    5.1 MEDIUM 0.1% exploit odds Fix listed
  32. CVE-2026-127928

    In MCUboot's serial-recovery encrypted-image support (boot/boot_serial/src/boot_serial_encryption.c), decrypt_image_inplace() and boot_image_validate_encrypted() each keep a stack-local struct boot_status. boot_enc_load() writes the plaintext per-image AES key into its enckey[] field. Neither function cleared this structure before returning. In addition, a decrypt failure inside the per-sector loop of decrypt_image_inplace() returned early and skipped the total_out: cleanup, which left the expanded AES key context (enc_data) on the stack as well. The error paths of boot_image_validate_encrypted() similarly skipped boot_enc_zeroize(). The affected code is built when encrypted images (MCUBOOT_ENC_IMAGES, Zephyr CONFIG_BOOT_ENCRYPT_IMAGE) are combined with serial recovery. It runs when an encrypted image is uploaded to the primary slot over the recovery protocol, and when the image list or state is queried while an encrypted image is in the secondary slot. After these functions return, the image's AES content key remains in dead stack memory. An attacker who can later read device RAM, for example through a debug port or retained RAM, can recover it. This weakens the confidentiality of image-encryption keys within the bootloader trust boundary. A recovered key exposes the plaintext of the encrypted firmware image it protects. The device's long-term private decryption key is not exposed. No remote or recovery-protocol channel that returns this memory is known, so exploitation requires a separate memory-read capability.

    Other Device

    2.0 LOW 0.1% exploit odds Fix listed
  33. CVE-2026-128091

    When MCUboot is built with the TinyCrypt crypto backend (MCUBOOT_USE_TINYCRYPT), bootutil_aes_ctr_drop() in boot/bootutil/include/bootutil/crypto/aes_ctr_tinycrypt.h was an empty stub. The AES-CTR context for this backend is the fully expanded AES-128 key schedule (struct tc_aes_key_sched_struct). Generic code relies on this hook to release and clear key state, so with TinyCrypt nothing was cleared. The mbedTLS and PSA backends do free or destroy their key state here. As a result, boot_state_clear(), which boot_go() calls before handing off to the application, left the image's AES content-encryption key schedule in the static boot_data state. This is the case after an encrypted upgrade in single-image builds, where boot_enc_zeroize() is not called. boot_decrypt_key() likewise left the ECIES-derived key-encryption key schedule on the stack. The affected build uses MCUBOOT_ENC_IMAGES with TinyCrypt, which is the default ECDSA and Ed25519 backend in the Zephyr port. The first AES-128 round key equals the cipher key, so anyone who can read the leftover bootloader RAM after boot can recover the image content key and decrypt that encrypted image. That includes a physical attacker with debug or RAM access, or code later running on the device. This weakens image-encryption key confidentiality (and so the confidentiality of the encrypted image's plaintext). The device's long-term private decryption key is not exposed, and image authenticity is not affected. The fix wipes the context with bootutil_wipe_memory().

    Crypto Device

    2.0 LOW 0.1% exploit odds Fix listed
  34. CVE-2026-16659

    MCUboot's serial-recovery image-upload handler bs_upload() in boot/boot_serial/src/boot_serial.c declares const struct flash_area *fap = NULL and assigns it only via flash_area_open() part-way through the function. Two early validation failures (goto out_invalid_data) — a CBOR map that fails to decode, or an upload packet missing the off/data members — branch past the open while fap is still NULL, then fall into the shared epilogue. In MCUBOOT_ENC_IMAGES builds that epilogue unconditionally calls boot_handle_enc_fw(fap), which reaches boot_image_load_header() and flash_area_read() and dereferences the NULL flash_area. The defect is reachable pre-authentication: the trigger is the very first serial-recovery upload command carrying a malformed payload. The guarding conditions are default-true on a fresh recovery session — img_num, curr_off and img_size are zero-initialized statics, so curr_off == img_size and the primary-slot test both hold. It requires a non-default build: encrypted images (MCUBOOT_ENC_IMAGES / Zephyr CONFIG_BOOT_ENCRYPT_IMAGE) together with an active serial-recovery transport, on the Zephyr or Mynewt port (the two that build both boot/boot_serial/src/boot_serial.c and boot_serial_encryption.c with MCUBOOT_ENC_IMAGES). The impact is a transient denial of service of the bootloader during recovery. fap is a hard NULL rather than an attacker-controlled value, so there is no memory-corruption or information-leak primitive and image authentication is unaffected. Whether the dereference faults is platform-dependent — on targets where address 0x0 is mapped readable flash the read merely returns an error and execution continues, while targets that trap NULL (MPU / null-pointer-exception detection) take a hard fault. Because serial recovery is unauthenticated by design and already permits the console attacker to write the secondary slot, the added capability is only a low-value transient crash. The related unconditional flash_area_close(fap) call in the same epilogue is a safe no-op on the ports that reach it, so it does not contribute to the dereference. The affected ports are the Zephyr port — boot/zephyr/CMakeLists.txt compiles boot_serial.c under CONFIG_MCUBOOT_SERIAL and boot_serial_encryption.c under CONFIG_BOOT_ENCRYPT_IMAGE — and the Mynewt port, whose mcuboot_config.h defines MCUBOOT_SERIAL unconditionally and MCUBOOT_ENC_IMAGES under any BOOTUTIL_ENCRYPT_ syscfg, with boot/boot_serial/pkg.yml declaring no explicit source list so the whole directory is built. The Espressif port is not affected**: it compiles boot_serial.c but not boot_serial_encryption.c, and defines no MCUBOOT_ENC_IMAGES, so the #ifdef MCUBOOT_ENC_IMAGES block containing the call is preprocessed away. The NuttX, Cypress and Mbed ports do not build boot_serial.c at all.

    Memory safety Device

    4.0 MEDIUM 0.1% exploit odds Fix listed
  35. CVE-2026-15465

    Software installed and run as a non-privileged user may conduct improper GPU system calls through the DDK kernel module interface. Under unsupported use of the interface, a use-after-free condition may occur that can lead to kernel memory corruption, platform instability, or system reboot. The weakness occurs when software references memory after it has been released. Accessing memory after free may result in corruption of valid data structures, unexpected program behaviour, process crashes, or execution of unintended operations.

    Memory safety Device

    7.8 HIGH 0.1% exploit odds No fix listed
  36. CVE-2026-127915

    The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it. The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying. The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.

    Memory safety Device

    2.0 LOW 0.1% exploit odds Fix listed
  37. CVE-2026-127916

    bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed. The callers bound part of the span, or none of it: On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB. Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span. The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well. The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication. Whether a malformed header produces an actual read beyond the area depends on the flash backend: Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read. With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check. The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy(). The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting. The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller.

    Memory safety Device

    2.9 LOW 0.1% exploit odds Fix listed
  38. CVE-2026-127209

    Xiaomi Mi Browser Android Application (com.mi.globalbrowser) before 14.66.0-gn contains a path traversal vulnerability in the exported ThirdDocViewerActivity component, where CopyExternalFile.copyFromUri() copies content provider streams using an unsanitized filename from the _display_name column without basename reduction or canonical-path checks. A zero-permission co-resident malicious application can supply a crafted content provider with a _display_name containing .. sequences to make the browser write attacker-controlled bytes to an arbitrary path within its external storage directory, escaping the intended cache_docs staging location without requiring user interaction.

    Disclosure Device

    5.1 MEDIUM 0.2% exploit odds No fix listed
  39. CVE-2026-106018

    Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO FW allows Authentication Bypass. This issue affects EasyIO FW: through 3.0b25.

    Auth & access Device

    8.7 HIGH 0.3% exploit odds No fix listed
  40. CVE-2026-52786

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.

    Memory safety Device

    7.1 HIGH 0.2% exploit odds Fix listed
  41. CVE-2026-47711

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, the current master demo server can be crashed remotely over BACnet/IP by sending a valid Confirmed WriteProperty request that updates loop-1's controlled-variable-reference to point to life-safety-zone-1 / accepted-modes. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.6 HIGH 0.3% exploit odds Fix listed
  42. CVE-2026-47257

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. In versions 1.5.0 and 1.6.0-rc1, there is a restore logic flaw in bacnet-stack that is reachable through the official, unmodified apps/server management path when BACNET_BACKUP_RESTORE is enabled. This issue has been patched in versions 1.5.1 and 1.6.0.

    Other Device

    8.1 HIGH 0.4% exploit odds Fix listed
  43. CVE-2026-47258

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  44. CVE-2026-47259

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a RemoveListElement request targeting Notification-Class.recipient-list can trigger a stack-based out-of-bounds write in the current master branch when the request contains more than NC_MAX_RECIPIENTS valid BACnetDestination elements. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  45. CVE-2026-47710

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-buffer-overflow can be triggered in the current master branch when a Loop object reads a referenced property through its default timer path and the referenced property is OBJECT_STRUCTURED_VIEW / PROP_DESCRIPTION containing a long attacker-controlled string. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed
  46. CVE-2026-46674

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, an out-of-bounds read vulnerability exists in bacnet-stack's AtomicWriteFile record-access path. The bug is caused by a mismatch between an externally controlled returnedRecordCount field and the fixed-size internal fileData[] array used by BACNET_ATOMIC_WRITE_FILE_DATA. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    7.5 HIGH 0.4% exploit odds Fix listed
  47. CVE-2026-46676

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, an uninitialized value use vulnerability in bacnet-stack's AtomicReadFile record-access ACK encoder allows unauthenticated remote attackers to corrupt the encoded OCTET STRING length and payload boundary in network responses by sending a crafted AtomicReadFile request that reaches a successful record-access path. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    5.3 MEDIUM 0.3% exploit odds Fix listed
  48. CVE-2026-46677

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a client-side out-of-bounds read in the AtomicReadFile-ACK record-access handling path. The issue is caused by a mismatch between a remote returnedRecordCount value and the fixed local fileData[] array capacity in BACNET_ATOMIC_READ_FILE_DATA. The ACK decode path preserves the remote RecordCount, discards storage for excess records without truncating that count, and a downstream sink later iterates over the original RecordCount and indexes fileData[i] out of bounds. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    6.5 MEDIUM 0.2% exploit odds Fix listed
  49. CVE-2026-47217

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, a remote attacker can trigger an uncontrolled recursion and stack overflow in the default server application of bacnet-stack by abusing the Channel object. This issue has been patched in versions 1.4.4 and 1.5.1.

    Denial of service Device

    7.5 HIGH 0.4% exploit odds Fix listed
  50. CVE-2026-45265

    BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1.

    Memory safety Device

    8.2 HIGH 0.3% exploit odds Fix listed

The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.