Just published.
The newest CVEs, straight from CVE.org and NVD.
-
CVE-2026-107900
V-SFT provided by FUJI ELECTRIC CO., LTD. contains an out-of-bounds read vulnerability in VS6ComFile!CCheck::ItemCheck. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-107894
V-SFT provided by FUJI ELECTRIC CO., LTD. contains a stack-based buffer overflow vulnerability. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-107895
V-SFT provided by FUJI ELECTRIC CO., LTD. contains an out-of-bounds write vulnerability. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-107896
V-SFT provided by FUJI ELECTRIC CO., LTD. contains an out-of-bounds read vulnerability in VS6ComFile!load_gr_item. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-107897
V-SFT provided by FUJI ELECTRIC CO., LTD. contains an out-of-bounds read vulnerability in VS6MemInIF!set_temp_type_default. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-107898
V-SFT provided by FUJI ELECTRIC CO., LTD. contains an out-of-bounds read vulnerability in VS6EditData!CDataRomErrorCheck::MacroCommandCheck. Opening a crafted V7 file may lead to information exposure or arbitrary code execution on the affected product.
-
CVE-2026-116099
A flaw has been found in Fusion Creators Studio SCP Containment Breach Multiplayer up to 1.295. This issue affects the function BlitzBanks of the component Skynet++ Virtual Machine. Executing a manipulation can lead to out-of-bounds write. The attack can be executed remotely. The exploit has been published and may be used. Upgrading to version 1.3R is capable of addressing this issue. It is recommended to upgrade the affected component.
-
CVE-2026-116096
A weakness has been identified in ggml-org llama.cpp. Affected by this issue is the function list_pockettts_state_slots of the file tools/mtmd/models/pockettts-gen.cpp of the component Pocket-TTS. This manipulation of the argument mmproj causes out-of-bounds write. The attack requires local access. The exploit has been made available to the public and could be used for attacks. Upgrading to version b11796 can resolve this issue. Patch name: 0a1ef309cdbb9f2024f58a38fb4c42352c5db569. The affected component should be upgraded. The reported heap out‑of‑bounds write (gen‑audio / pocket‑tts state_out path) is no longer a silent exploitable heap write on current master and the latest release b11871 - a malicious mmproj that previously triggered it now trips a release‑active GGML_ASSERT and aborts. But the submitter's recommended by‑construction fix (PR #29360 "prevent OOB accesses from malformed mmproj files") is still open. So the root cause is detected‑and‑aborted, not prevented‑by‑design.
-
CVE-2026-116188
rclone serve s3 versions 1.75.0 before 1.75.2 contain an integer overflow vulnerability in multipart reorder-memory accounting that bypasses the configured buffer limit. Attackers can open two concurrent current-part PUT requests declaring huge lengths to wrap the signed int64 counter and retain out-of-order parts in memory, exhausting the host.
-
CVE-2026-116156
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a memory leak caused by a missing cleanup when the -set profile option is used. An attacker who induces a user to process images with the -set profile option can leak memory, potentially exhausting resources and causing a denial of service.
-
CVE-2026-116157
ImageMagick before 7.1.2-33 contains a memory leak vulnerability in PerlMagick that fails to free values returned when reading image properties. Attackers can repeatedly trigger property reads through five affected PerlMagick code locations to exhaust memory and cause denial of service.
-
CVE-2026-116159
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a memory leak in the handling of the -cdl (color decision list) option, where allocated memory is not cleaned up after use. Attackers can supply input that causes the -cdl option to be processed, repeatedly leaking memory and degrading availability through resource exhaustion.
-
CVE-2026-116160
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a heap-based buffer overflow in the X11 animate operation when processing crafted images. Attackers can supply a malicious image that, when a user runs an X11 animate operation on it, overwrites heap memory and can crash the application.
-
CVE-2026-116149
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a stack-based buffer overflow in the handling of bzip2 compressed images. Attackers can supply a crafted image using bzip2 compression to overwrite stack memory during decoding, causing crashes or memory corruption.
-
CVE-2026-116151
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a memory leak in the JNG encoder that fails to release allocated memory when processing a crafted image. Attackers can supply crafted images that are encoded to JNG to leak memory, potentially causing resource exhaustion and a limited denial of service.
-
CVE-2026-116152
ImageMagick before 7.1.2-33 contains a memory leak vulnerability in the MAT decoder that fails to release allocated memory in a specific error path. Attackers can supply crafted MAT files that trigger this error path repeatedly, causing small memory leaks that gradually consume process memory.
-
CVE-2026-116153
ImageMagick before 7.1.2-33 contains a heap buffer overflow vulnerability on 32-bit systems that allows attackers to overwrite heap memory when convex-hull information is requested. Attackers can supply crafted images processed with convex-hull calculations to corrupt heap memory, causing crashes or potential code execution.
-
CVE-2026-116154
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a memory leak in its XML parsing code, where allocated memory is not released when parsing reaches the nesting depth limit. Attackers can supply crafted, deeply nested XML data to trigger the leak, causing memory exhaustion and denial of service.
-
CVE-2026-116142
ImageMagick before 7.1.2-33 contains a heap buffer over-read vulnerability that allows attackers to read beyond allocated memory when printing a minimum-bounding-box. Attackers can supply a crafted image that triggers the over-read during minimum-bounding-box output, causing crashes or exposing adjacent heap memory.
-
CVE-2026-116146
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a memory leak in the MSL decoder that fails to release allocated memory when processing a crafted MSL image. Attackers can supply crafted MSL files for processing to repeatedly leak memory, causing resource exhaustion and denial of service.
-
CVE-2026-116147
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a null pointer dereference in the DJVU decoder because the result of a memory allocation is not checked before use. Attackers can supply a DJVU image that, when processed under conditions where the allocation fails, crashes the process and causes a denial of service.
-
CVE-2026-114629
Web::Simple versions before 0.035 for Perl allocate a buffer sized by the Content-Length header for urlencoded body parameters. Web::Dispatch::ParamParser::get_unpacked_body_from reads an application/x-www-form-urlencoded body using a single read call, with no cap and the return value ignored. Perl's read grows the buffer to the requested length before reading, so the declared Content-Length determines the allocation. An attacker can trigger this through any route whose dispatch specification has a % body-parameter match, such as sub (POST + %name=), sending a Content-Length far larger than the body actually sent. No authentication is involved.
-
CVE-2026-116014
open62541 1.5.0 before 1.5.7 contains an integer overflow in UA_DataType_fromStructureDescription() that wraps the 16-bit memSize field for large custom structure definitions. A malicious OPC UA server can supply DataType definitions via UA_Client_getRemoteDataTypes(), causing decodeBinaryStructure() to overflow the heap, crashing clients or enabling code execution.
-
CVE-2026-115801
A security flaw has been discovered in Kakao khaiii up to 0.4. The impacted element is the function khaiii::nn::Linear::open of the file src/main/cpp/khaiii/nn/Linear.cpp of the component JSON Config File Handler. The manipulation of the argument hidden_dim/class_num results in out-of-bounds read. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor explains: "khaiii treats the resource directory (--rsc-dir) as trusted input, like a binary or a shared library. To use this defect, an attacker must already be able to write to that directory. With that access, an attacker can change the analysis results without this defect." This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-79982
The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool. The device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path through LE Extended Advertising Report events, which the controller fragments only to CONFIG_BT_BUF_EVT_RX_SIZE. In the stock configuration the overflow is already reached without any radio traffic: the mandatory Read Supported Commands command-complete event is 70 bytes and overruns the 64-byte slot by six bytes on every host initialization. Because net_buf_add_mem() validates tailroom only through an assertion unless CONFIG_NET_BUF_HARDENING is enabled, builds with CONFIG_ASSERT=n — the usual production setting — silently corrupt memory adjacent to the USB buffer pool with attacker-chosen contents, which on a target without memory protection between subsystems can lead to arbitrary code execution. Builds with assertions enabled fail the assertion instead and panic, giving a remotely triggerable denial of service. The fix introduces a separate bt_hci_tx_pool sized to MAX(BT_BUF_ACL_RX_SIZE, BT_BUF_EVT_RX_SIZE) for the controller-to-host direction while leaving the host-to-device pool at the endpoint packet size, which is already bounds-checked during reassembly.
-
CVE-2026-79978
The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will report (read_len = MIN(fifo_bytes, buf_avail)) to the space actually returned by rtio_sqe_rx_buf(), but then queues one 6-byte bus read per hardware FIFO entry at consecutive offsets from read_buf, bounded by the device-reported entry count rather than by the clamp. When the allocated buffer is smaller than a full batch, the driver writes up to 186 bytes past the end of the allocation; a companion defect left data->fifo_total_bytes un-reset at batch start, so an aborted or errored chain could leave a stale write offset that pushes the next batch's writes out of bounds as well. A short buffer is an expected, first-class outcome of the RTIO allocator: rtio_block_pool_alloc() walks the requested size down one block at a time until a contiguous run is available, and the driver only demands sizeof(struct adxl345_fifo_data) + 6 bytes as its minimum. Any streaming configuration whose mempool block granularity is smaller than a full FIFO batch (204 bytes) — for example the sensor shell's RTIO_DEFINE_WITH_MEMPOOL(sensor_read_rtio, 8, 8, 32, 64, 4) used by sensor stream <dev> on fifo_wm incl, or the 16-byte-block streaming example in the documentation — takes this path whenever the pool is fragmented or the consuming thread falls behind. The out-of-bounds writes are performed by the I2C/SPI RTIO backend (DMA on many SoCs) into the shared RTIO block pool, corrupting neighbouring live buffers or, for a pool smaller than one batch, memory beyond the pool itself. The written bytes are accelerometer samples and the destination follows the allocation, so there is no controllable corruption primitive: the realistic impact is silent corruption of other RTIO consumers' data or a crash. Reaching it requires a board with an interrupt-wired ADXL345 built with CONFIG_ADXL345_STREAM, plus buffer-pool starvation, which a co-resident local workload can induce but which also occurs spontaneously under load; there is no network, USB or radio path to this code.
-
CVE-2026-79979
The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is mapped with MT_NG, i.e. non-global. A domain's cached translation therefore survived the invalidation. All callers of invalidate_tlb_page() are demand-paging paths. When the eviction algorithm reclaims a frame, page_frame_prepare_locked() in kernel/mmu.c calls arch_mem_page_out(), which marks the kernel leaf invalid, propagates the invalid descriptor into every domain via sync_domains(), and then flushes only ASID 0. do_page_fault() immediately reuses the very same page frame for the incoming mapping through arch_mem_page_in(). A user thread that had already touched the evicted page — a k_mem_partition added with arch_mem_domain_partition_add(), or its own stack mapped by map_thread_stack() — retains a valid EL0 read/write translation to that physical frame under its own ASID. Unprivileged code running in a user thread can drive memory pressure to force eviction and then keep accessing the stale address, obtaining read and write access to whatever the kernel subsequently placed in that frame: supervisor data, another memory domain's partition, or another thread's stack. This defeats the isolation that CONFIG_USERSPACE is meant to enforce, allowing information disclosure and memory corruption up to full compromise of the system. The fix switches the implementation to TLBI VAAE1{IS}, which matches every ASID and both global and non-global entries, so no domain-tagged translation survives a page out, dirty-bit update or access-flag clear. Exploitation requires an arm64 build with both CONFIG_USERSPACE and CONFIG_DEMAND_PAGING enabled, an active backing store, and at least one demand-paged page that is also privately mapped into a user memory domain. The same commit additionally stops globalize_table() from stripping EL0 permission and non-global attributes off domain-private leaves during paging synchronization, which previously caused user threads to lose access to their own partitions and stacks.
-
CVE-2026-115567
Tokio is a runtime for writing applications with Rust. In 1.54.0, a race condition between tokio::time::Interval::poll_tick (including .tick().await) and the multi-threaded runtime's time driver could drop an internal timer entry without synchronizing with the driver thread that was firing it. The race caused a use-after-free on the timer's waker and task state in safe Rust, which could produce assertion panics, task reference-count corruption, or heap memory corruption. This issue is fixed in 1.54.1.
-
CVE-2026-115863
ConnMan through 2.0 has a stack-based buffer overflow via a DHCPv6 Reply message. This occurs in get_domains in gdhcp/client.c. It copies a fixed NS_MAXDNAME (1025) bytes from a DHCPv6 DOMAIN_LIST (option 24) value into a 1026-byte stack buffer dns_name regardless of the actual option length, then walks DNS labels with an unbounded "c += jump + 1" loop. A crafted DHCPv6 REPLY with a DOMAIN_LIST option of >= 1025 non-zero bytes makes the label walk leave the buffer and read/write '.' past its end in attacker-chosen strides. An on-link attacker can trigger this without authentication via a forged Router Advertisement (O=1) and a forged DHCPv6 REPLY matching xid/CLIENTID with a long DOMAIN_LIST. The impact is unauthenticated on-link crash of connmand (runs as root). This was introduced in bb06c47.
-
CVE-2026-53918
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12.
-
CVE-2026-53920
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or otherwise short IA option at the end of odhcpd's 8192-byte receive stack buffer, the IAID read crosses from data_buf into adjacent stack memory. The disclosed bytes are then reflected in the DHCPv6 reply IAID; prior ARM validation showed data_buf[8192:8196] disclosing the saved stack canary, and wider stack scans can leak ASLR-useful stack/process contents. This issue has been patched in version 25.12.3.
-
CVE-2026-53921
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA response handler writes past the end of a fixed 512-byte stack buffer (pdbuf) when a single DHCPv6 REQUEST carries enough IA options to nearly exhaust the reply space. Two independent overflow sites exist in the same call chain, both reachable from the network via a single unauthenticated UDP packet. odhcpd runs as root on OpenWrt; embedded targets often lack stack canaries and ASLR, making code execution realistic. This issue has been patched in version 25.12.
-
CVE-2026-55606
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In versions 25.12 and prior, odhcpd's DHCPv6 self-loop detection at dhcpv6.c:720 uses a network-byte-order DUID length value directly as the memcmp() size parameter. On little-endian hosts, this causes memcmp() to read far beyond the stack buffer — a single unauthenticated DHCPv6 packet triggers a 2560-byte overread from a 128-byte buffer. At time of publication, there are no publicly available patches.
-
CVE-2026-99079
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on refill retry When an XDP redirect to an AF_XDP socket fails because its RX ring is full, the XSK core frees the buffer. During the subsequent batched refill of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before allocating a replacement. If that refill succeeds only partially, a WQE left without a replacement retains its old buffer pointer. The buffer can meanwhile be allocated to another WQE. A later refill retry can then free the live buffer through the stale pointer and publish the same UMEM frame twice. Mark the WQE as released immediately after the driver-side free. The flag is already cleared when a replacement buffer is assigned, so refill retries no longer release stale pointers. The failure is silent and produces no kernel warning or splat. A standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914 packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64 ownership/double-publication errors. With this change it processed 356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events, with no ownership or data errors.
-
CVE-2026-99081
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch.
-
CVE-2026-99083
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix heap out-of-bounds write in krb5_authenticate() In krb5_authenticate(), out_len is calculated to determine available headroom in response_buf for the incoming Kerberos AP-REP token. However, when SMB2_SESSION_SETUP is processed as a non-first element of a compounded SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off. This causes out_len to overstate remaining buffer headroom by the cumulative size of prior responses in the compound chain. Consequently, the length check in ksmbd_krb5_authenticate() (*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy() to write the AP-REP blob past the end of response_buf into adjacent kernel heap memory. Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len, ensuring it accurately reflects physical remaining buffer space.
-
CVE-2026-99063
In the Linux kernel, the following vulnerability has been resolved: dm ioctl: don't let data_start run past the buffer struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root.
-
CVE-2026-99068
In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix memory leakage when clearing DAO input mappers Commit e576e7843c0d ("ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions") centralized the DAO input mapper clearing logic in dao_clear_input(), but omitted the kfree() calls. It removes the mapper entries from the list and sets their pointers to NULL without freeing the allocated array. This leaks memory each time dao_clear_input() is called. Store the base pointer of the allocation before clearing the mapper entries and free the array after removing entries from the list.
-
CVE-2026-99054
In the Linux kernel, the following vulnerability has been resolved: tipc: destroy topsrv workqueues before closing connections tipc_topsrv_stop() closed subscriber connections while the topology server's send and receive workqueues were still running. Socket callbacks and subscription events could then queue more work, and in-flight send/recv work could drop the last connection reference during the conn_idr walk. That race produced several teardown failures: refcount_t addition on 0 from conn_get() on a connection whose release was blocked on idr_lock, a subsequent use-after-free in tipc_conn_close(), queue_work() on an already destroyed workqueue from the listener data-ready callback, and an RCU stall in tipc_topsrv_exit_net() while the walk spun under idr_lock. Clear srv->listener under idr_lock so it acts as a shutdown flag, skip queue_work() once it is NULL, destroy the workqueues to flush in-flight work, and only then close the remaining connections. Refuse tipc_conn_lookup() after that flag is cleared, and drop idr_lock when the teardown walk finds no connection, so an in-flight subscription event cannot pin idr_in_use while the walk holds the lock. v3 supersedes the narrower in-thread diff Tung Quang Nguyen posted on 2026-09-23. It keeps his teardown order and adds the lookup refusal and the empty-idr unlock.
-
CVE-2026-99057
In the Linux kernel, the following vulnerability has been resolved: xen/netfront: don't leak the skb when xennet_fill_frags() fails When a response chain has more slots than fit in the skb's frags, xennet_fill_frags() returns an error and xennet_poll() jumps to its error path. That path moves what's left on tmpq to errq to be freed, but the skb being filled was already dequeued from tmpq, so it's never freed. Each chain that overflows leaks the skb and the pages attached to it as frags, and the backend decides how many slots it sends. Put the skb back on tmpq before taking the error path, like the xennet_set_skb_gso() failure just above it does.
-
CVE-2026-99046
In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak on error descriptor When the error bit is set in the RX completion descriptor, the buf_state and its attached buffer should be freed. In the case of AF_XDP ZC, the XSK buffer was not freed, leading to a leak. This issue was caught by LLM.
-
CVE-2026-99047
In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production.
-
CVE-2026-99050
In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix race when arming the IRQ poll worker gpio_mpsse_irq_enable() arms the poll worker before publishing it: schedule_work() runs before the worker is added to priv->workers. If gpio_mpsse_disconnect() walks the list in that window it misses the worker, and once disconnect returns, the USB core frees mpsse_priv while the orphaned gpio_mpsse_poll() work keeps accessing it, causing a use-after-free. Fix this by publishing and arming the worker in one irq_spin critical section. Teardown walks the same list under irq_spin, so a worker found on the list is guaranteed to be armed, and cancel_work_sync() handles it whether it is queued or running. A worker armed after the disconnect walk would still be missed, so also set a new priv->dying flag under irq_spin before the teardown walk, and check it in the same critical section, freeing it via kfree_rcu() instead when the device is going away, since kfree() would be called with the IRQ core's raw spinlock held and may sleep on PREEMPT_RT. schedule_work() is safe to call with irq_spin held, and the next probe gets a fresh mpsse_priv, so the flag never needs to be cleared. This issue was found by an in-house static analysis tool.
-
CVE-2026-99051
In the Linux kernel, the following vulnerability has been resolved: fsverity: RCU-delay the freeing of struct fsverity_info __fsverity_get_info() calls rhashtable_lookup_fast(), which just uses rcu_read_lock() and doesn't directly synchronize with fsverity_remove_info(). For the same inode this isn't a problem: its fsverity_info is removed only at inode eviction time or upon failure to enable verity, when the inode no longer needs its fsverity_info and it will no longer be accessed via that inode. However, this is broken and can cause a use-after-free for concurrent __fsverity_get_info() for *different* inodes. Those rely on following fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only. They also use fsverity_info::inode to do the key comparison. Fix this by RCU-delaying the freeing of 'struct fsverity_info' after it's been removed from the rhashtable.
-
CVE-2026-99053
In the Linux kernel, the following vulnerability has been resolved: tipc: hold a reference to nodes found by link name tipc_node_find_by_name() returns a node after dropping its RCU read lock without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS handlers then lock and access the node, racing with timer-driven cleanup of a down peer. Generic netlink serialization does not exclude the node timer. The following interleaving can leave a handler using a freed node: CPU 0: find the node under RCU and release the node read lock CPU 1: tipc_node_timeout() clears the links and unlinks the down node CPU 1: drop the list and timer references, queuing tipc_node_free() CPU 0: leave the RCU read-side critical section CPU 1: complete the grace period and free the node CPU 0: acquire the node lock through the stale pointer LINK_SET also uses the node's media address after releasing the node lock, when passing queued packets to tipc_bearer_xmit(). KASAN on v7.3-rc5 reported: BUG: KASAN: slab-use-after-free in _raw_read_lock_bh Write of size 4 at addr ffff88807e06f008 by task poc/92 Call Trace: _raw_read_lock_bh kernel/locking/spinlock.c:287 tipc_nl_node_set_link net/tipc/node.c:2475 genl_family_rcv_msg_doit net/netlink/genetlink.c:1114 genl_rcv_msg net/netlink/genetlink.c:1209 netlink_rcv_skb net/netlink/af_netlink.c:2575 Allocated by task 0: tipc_node_create net/tipc/node.c:539 tipc_node_check_dest net/tipc/node.c:1196 tipc_disc_rcv net/tipc/discover.c:252 Freed by task 92: kfree mm/slub.c:6801 rcu_core kernel/rcu/tree.c:2919 Last potentially related work creation: __call_rcu_common.constprop.0 kernel/rcu/tree.c:3181 tipc_node_timeout net/tipc/node.c:814 Acquire a reference to the selected node with kref_get_unless_zero() before leaving RCU, returning NULL if the node has already been released. Release that reference on every caller exit after the last node access, including transmission in LINK_SET. Keep the existing link lookup order and locking so concurrent link removal still takes the existing error paths.
-
CVE-2026-99039
In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight.
-
CVE-2026-99044
In the Linux kernel, the following vulnerability has been resolved: ice: fix use-after-free in dynamic port cleanup ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic port from pf->dyn_ports. However, it frees the VSI before reading the index for the erase, resulting in a use-after-free. Follow the reverse of the allocation order in ice_alloc_dynamic_port() by erasing the xarray entry before freeing the VSI.
-
CVE-2026-99030
In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits() When skb_copy_and_csum_bits() reaches unreadable frags it returns 0 after copying only the linear part, and the rest of the caller's buffer is left as it was. The callers copy into a buffer that is about to go out on the wire: an ICMP error quoting the offending packet, or a driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer is zeroed beforehand, so whatever was in memory there gets sent. Zero the part of the buffer we didn't fill. The checksum usually won't match the data any more, so the receiver will usually drop the packet, but either way it no longer carries anything it shouldn't. Only zero for a positive @len, a negative one from a broken caller must not turn into a huge memset().
-
CVE-2026-99032
In the Linux kernel, the following vulnerability has been resolved: net/smc: protect clcsock lifetime in smc_getname smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise.
-
CVE-2026-99035
In the Linux kernel, the following vulnerability has been resolved: mmc: mtk-sd: Cancel request timeout work on remove The driver queues req_timeout while a request is active. msdc_request_done() uses cancel_delayed_work(), which does not wait for a timeout callback that has already started. The timeout callback calls mmc_request_done(), which wakes the request waiter, and then continues to use host->dev_comp and check the SDIO IRQ. During unbind, msdc_drv_remove() can return and the managed mmc_host can be freed before the callback finishes. KASAN reported use-after-free accesses in msdc_request_done() and msdc_recheck_sdio_irq() in each of three unbind tests. The same tests completed without a kernel diagnostic after this change. Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new requests and before the driver releases the host resources.
The newest published CVE records from CVE.org and NVD, refreshed every few minutes, with severity, exploit odds and fix status.