Other CVEs.
Published CVEs that affect other software, ranked by exploit odds.
-
CVE-2026-126962
open62541 Subscription Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of open62541. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of subscriptions. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-30231.
-
CVE-2026-126978
Philips Hue Bridge hap_pair_setup_handler Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HomeKit Accessory Protocol service, which listens on TCP port 8080 by default. When parsing pairing requests, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length, heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28434.
-
CVE-2026-126979
Philips Hue Bridge HomeKit Accessory Protocol chacha20_decrypt Integer Underflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HomeKit Accessory Protocol service, which listens on TCP port 8080 by default. When parsing pairing requests, the process does not properly validate user-supplied data, which can result in an integer underflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28332.
-
CVE-2026-126975
llama.cpp GGUF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of GGUF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-34558.
-
CVE-2026-126973
KDE Gwenview PNG File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of KDE Gwenview. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29373.
-
CVE-2026-126970
KiCad Altium SCHLIB File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of KiCad. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SCHLIB files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated object. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-33213.
-
CVE-2026-126974
llama.cpp GGUF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of GGUF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before writing to memory. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-34553.
-
CVE-2026-126976
llama.cpp MTMD Multimodal GGUF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must open a malicious file. The specific flaw exists within the parsing of audio multimodal projector GGUF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-30980.
-
CVE-2026-131873
Gargoyle 2023.1 through 2026.1.1 contains a stack-based buffer overflow vulnerability in the bundled Plus interpreter's ReadAction() function in terps/plus/loaddatabase.c, which never bounds-checks the index into the 1024-entry conditions array. Attackers can supply a crafted or truncated .plus game file with unterminated action conditions to write file-controlled values past the array and crash the player.
-
CVE-2026-131872
SOIL2 before 1.4.2 contains a NULL pointer dereference vulnerability in its DDS, PVR and PKM image loaders that write results through unchecked caller-supplied output pointers. Attackers can supply a valid DDS, PVR or PKM file to applications passing NULL output pointers to SOIL_load_image or stbi_info, causing a crash.
-
CVE-2026-131846
Poppler 0.76.1 through 26.11.0 contains a heap-based buffer overflow in SplashOutputDev::iccTransform() that allows attackers to write out of bounds when rendering in splashModeDeviceN8. Attackers can supply a PDF with an ICCBased image whose alternate is DeviceN, causing getDeviceNLine() to overflow the per-row buffer, crashing the renderer and corrupting heap memory.
-
CVE-2026-132143
A vulnerability has been found in DrayTek Vigor2960 up to 1.5.1.6. This vulnerability affects the function doWebBackup of the file /cgi-bin/mainfunction.cgi of the component Backup Handler. Such manipulation of the argument path/value leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.7 is able to resolve this issue. The affected component should be upgraded. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."
-
CVE-2026-132139
A weakness has been identified in DrayTek Vigor2960 up to 1.5.1.6. Affected is the function setSWMProfile of the file /cgi-bin/mainfunction.cgi. Executing a manipulation of the argument filename can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.5.1.7 is able to address this issue. It is recommended to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."
-
CVE-2026-130769
Incus before 7.6.0 contains a denial of service vulnerability that allows clients permitted to create instances to crash the daemon by importing a backup with a null snapshot entry in index.yaml. Attackers can trigger an unrecovered nil pointer dereference during configuration rewrite, terminating the daemon and all containers and virtual machines on the node.
-
CVE-2026-116443
Dell PowerStore SDNAS contains a stack-based buffer overflow in the NAS TFTP service that could allow an unauthenticated remote attacker to cause a denial of service or potential code execution.
-
CVE-2026-95823
tcp_pkt_linearize() in subsys/net/ip/tcp.c is used by th_get() whenever a received TCP header is not contiguous in a single net_buf. While pulling the header bytes out of the following fragments, the loop called net_buf_unref() on an emptied fragment without first detaching its frags pointer. net_buf_unref() walks the whole fragment list, so the payload buffers still linked behind that fragment were freed as well, and the stale pointer was then reinstalled into the packet as buf->frags, producing a use-after-free and a later double free during packet teardown. The same loop also advanced to second->frags unconditionally: when the fragment still held payload after the header remainder was pulled, it was spliced out of the packet without ever being unreferenced, permanently leaking that buffer and silently dropping the data it carried. The defect is reached from tcp_recv() via th_get() on every received TCP segment, before connection lookup or any header validation, so a single unauthenticated segment that matches a listening socket is sufficient. An attacker only needs the TCP header to straddle a net_buf boundary, which they can arrange from off-link: IPv6 extension headers are accepted on receive and their length is added to the header offset by th_get(), so a Destination Options header of a suitable length places the TCP header across the boundary of the fixed-size receive buffers (CONFIG_NET_BUF_DATA_SIZE). Packet chains assembled from several sources - IPv4/IPv6 reassembly, 6LoWPAN/802.15.4 reassembly, tunnel or virtual interfaces that strip an outer header, or drivers producing scatter-gather chains - can additionally present a short interior fragment that the loop empties exactly, which is the case that frees the remainder of the packet while it is still in use. The reliably reachable consequence is exhaustion of the receive buffer pool: each crafted segment leaks one net_buf from the fixed CONFIG_NET_BUF_RX_COUNT pool, the buffers are never reclaimed, and once the pool is empty the device can no longer receive network traffic until it is rebooted. Where a fragment is emptied exactly, the impact rises to memory corruption: freed pool buffers are written through by the remainder of the loop, their contents may be delivered to the application, and the packet is double-freed on teardown. The fix saves and clears second->frags before the net_buf_unref() so only the emptied header fragment is released, and advances to the next fragment only when second->len == 0, keeping any fragment that still holds payload in the packet. This restores the detach-before-unref ownership pattern used elsewhere in the stack, for example in net_pkt_trim_buffer().
-
CVE-2026-116446
Dell PowerStore SDNAS contains an out-of-bounds memory vulnerability in the NAS NFS service that an unauthenticated remote attacker could exploit to cause a denial of service.
-
CVE-2026-95788
An unauthenticated buffer overflow vulnerability exists in the underlying operating system of AOS-10 or AOS-8 and could allow an unauthenticated adjacent attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to disrupt the availability of the affected system, with a limited impact to the integrity of the affected component.
-
CVE-2026-126763
In Eclipse Mosquitto versions 1.6 to 2.0.22 and 2.1.0 to 2.1.2, an MQTT v5.0 client connecting with a will-delay-interval that subsequently disconnects with a shorter interval causes all delayed wills to be suppressed.
-
CVE-2026-130667
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability in the TIFF decoder that allows attackers to corrupt heap memory by supplying a crafted TIFF image. Attackers can provide a malicious TIFF file that, when encoded in a specific output format, triggers a heap buffer over-write causing memory corruption.
-
CVE-2026-130668
ImageMagick before 7.1.2-35 contains a double free vulnerability that allows attackers to trigger an invalid memory free by using the DPC compare metric. Attackers can supply images for comparison with the DPC metric to corrupt memory and crash the application, causing denial of service.
-
CVE-2026-130670
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability that allows attackers to read beyond allocated memory when BGRO image data is imported. Attackers can supply crafted BGRO data for processing to crash the application or leak adjacent heap memory contents.
-
CVE-2026-130662
ImageMagick before 7.1.2-35 contains a use after free vulnerability in the MSL decoder that can be triggered when processing crafted MSL image files. Attackers can supply a specially crafted MSL image to cause memory corruption, potentially crashing the application or leading to further compromise.
-
CVE-2026-130664
ImageMagick before 7.1.2-35 contains a heap buffer overflow vulnerability that allows attackers to write beyond allocated heap memory by supplying crafted images. Attackers can provide a crafted set of images processed by the magick stream operation to corrupt heap memory and crash the application.
-
CVE-2026-130665
ImageMagick before 7.1.2-35 contains a use after free vulnerability in the EXR decoder that is triggered when a specific memory allocation fails. Attackers can supply crafted EXR images processed under memory pressure to trigger the use after free, causing crashes or memory corruption.
-
CVE-2026-130656
ImageMagick before 7.1.2-35 contains an information disclosure vulnerability in the MNG decoder that allows attackers to expose uninitialized memory by supplying a crafted image. Attackers can submit malicious MNG files for processing to leak uninitialized memory contents, potentially revealing sensitive data from the process.
-
CVE-2026-130658
ImageMagick before 7.1.2-35 contains an information disclosure vulnerability in the RLA decoder that returns images containing uninitialized data. Attackers can supply a crafted RLA image to cause the decoded output to include uninitialized memory, potentially disclosing heap information.
-
CVE-2026-130660
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability in the MVG decoder that allows attackers to read out-of-bounds memory by supplying a crafted file. Attackers can provide a malicious MVG file for processing to trigger the over-read, causing application crashes or exposure of heap memory contents.
-
CVE-2026-130652
ImageMagick before 7.1.2-35 contains a heap buffer over-read vulnerability that allows attackers to read beyond allocated heap memory by triggering the -copy operation. Attackers can supply crafted images or arguments processed with -copy to crash the application or disclose adjacent heap memory contents.
-
CVE-2026-121481
Calling EVP_EncodeBlock() with an input length close to INT_MAX may overflow the calculation of the encoded output size and write past the end of the caller-supplied output buffer.
-
CVE-2026-110486
In Eclipse Mosquitto versions 2.1 through 2.1.2, a listener configured with `protocol websockets` mishandles empty WebSocket data frames. `net__read_ws()` in `lib/net_ws.c` returns the number of framing bytes consumed (the 4 masking-key bytes) for a data frame with a zero-length payload, without writing any bytes to the caller’s buffer. The MQTT packet reader in `packet__read_single()` (`lib/packet_mosq.c`) trusts that return value as a payload byte count. A remote client can therefore advance the read position over an uninitialised heap allocation, causing the broker to process and forward uninitialised heap memory (information disclosure, including heap and libc pointers), and can underflow the unsigned `to_process` counter so that subsequent attacker-controlled frame data is written past the end of the allocation (heap out-of-bounds write). The out-of-bounds write is reachable from the CONNECT packet before any authentication check, so an unauthenticated client can corrupt the heap and crash the broker even when `allow_anonymous false` is set. Combining the disclosure and the write allows remote code execution as the broker’s user by any client able to establish a session.
CVEs that affect other, sorted by how likely they are to be exploited (EPSS).