Network gear CVEs.
Published CVEs that affect network gear software, ranked by exploit odds.
-
CVE-2023-4966
Sensitive information disclosure in NetScaler ADC and NetScaler Gateway when configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server.
-
CVE-2025-22457
A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.6, Ivanti Policy Secure before version 22.7R1.4, and Ivanti ZTA Gateways before version 22.8R2.2 allows a remote unauthenticated attacker to achieve remote code execution.
-
CVE-2025-0282
A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.5, Ivanti Policy Secure before version 22.7R1.2, and Ivanti Neurons for ZTA gateways before version 22.7R2.3 allows a remote unauthenticated attacker to achieve remote code execution.
-
CVE-2025-5777
Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server
-
CVE-2022-42475
A heap-based buffer overflow vulnerability [CWE-122] in FortiOS SSL-VPN 7.2.0 through 7.2.2, 7.0.0 through 7.0.8, 6.4.0 through 6.4.10, 6.2.0 through 6.2.11, 6.0.15 and earlier and FortiProxy SSL-VPN 7.2.0 through 7.2.1, 7.0.7 and earlier may allow a remote unauthenticated attacker to execute arbitrary code or commands via specifically crafted requests.
-
CVE-2023-32560
An attacker can send a specially crafted message to the Wavelink Avalanche Manager, which could result in service disruption or arbitrary code execution. Thanks to a Researcher at Tenable for finding and reporting. Fixed in version 6.4.1.
-
CVE-2021-35395
Realtek Jungle SDK version v2.x up to v3.4.14B provides an HTTP web server exposing a management interface that can be used to configure the access point. Two versions of this management interface exists: one based on Go-Ahead named webs and another based on Boa named boa. Both of them are affected by these vulnerabilities. Specifically, these binaries are vulnerable to the following issues: - stack buffer overflow in formRebootCheck due to unsafe copy of submit-url parameter - stack buffer overflow in formWsc due to unsafe copy of submit-url parameter - stack buffer overflow in formWlanMultipleAP due to unsafe copy of submit-url parameter - stack buffer overflow in formWlSiteSurvey due to unsafe copy of ifname parameter - stack buffer overflow in formStaticDHCP due to unsafe copy of hostname parameter - stack buffer overflow in formWsc due to unsafe copy of 'peerPin' parameter - arbitrary command execution in formSysCmd via the sysCmd parameter - arbitrary command injection in formWsc via the 'peerPin' parameter Exploitability of identified issues will differ based on what the end vendor/manufacturer did with the Realtek SDK webserver. Some vendors use it as-is, others add their own authentication implementation, some kept all the features from the server, some remove some of them, some inserted their own set of features. However, given that Realtek SDK implementation is full of insecure calls and that developers tends to re-use those examples in their custom code, any binary based on Realtek SDK webserver will probably contains its own set of issues on top of the Realtek ones (if kept). Successful exploitation of these issues allows remote attackers to gain arbitrary code execution on the device.
-
CVE-2019-1663
A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected.
-
CVE-2017-14492
Heap-based buffer overflow in dnsmasq before 2.78 allows remote attackers to cause a denial of service (crash) or execute arbitrary code via a crafted IPv6 router advertisement request.
-
CVE-2025-9242
An Out-of-bounds Write vulnerability in the WatchGuard Fireware OS iked process may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the mobile user VPN with IKEv2 and the branch office VPN using IKEv2 when configured with a dynamic gateway peer. If the Firebox was previously configured with the mobile user VPN with IKEv2 or a branch office VPN using IKEv2 to a dynamic gateway peer, and both of those configurations have since been deleted, that Firebox may still be vulnerable if a branch office VPN to a static gateway peer is still configured.
-
CVE-2026-3055
Insufficient input validation in NetScaler ADC and NetScaler Gateway when configured as a SAML IDP leading to memory overread
-
CVE-2020-25687
A flaw was found in dnsmasq before version 2.83. A heap-based buffer overflow was discovered in dnsmasq when DNSSEC is enabled and before it validates the received DNS entries. This flaw allows a remote attacker, who can create valid DNS replies, to cause an overflow in a heap-allocated memory. This flaw is caused by the lack of length checks in rfc1035.c:extract_name(), which could be abused to make the code execute memcpy() with a negative size in sort_rrset() and cause a crash in dnsmasq, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
-
CVE-2020-25683
A flaw was found in dnsmasq before version 2.83. A heap-based buffer overflow was discovered in dnsmasq when DNSSEC is enabled and before it validates the received DNS entries. A remote attacker, who can create valid DNS replies, could use this flaw to cause an overflow in a heap-allocated memory. This flaw is caused by the lack of length checks in rfc1035.c:extract_name(), which could be abused to make the code execute memcpy() with a negative size in get_rdata() and cause a crash in dnsmasq, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
-
CVE-2016-6366
Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON.
-
CVE-2020-10924
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9643.
-
CVE-2018-0101
A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618.
-
CVE-2023-27997
A heap-based buffer overflow vulnerability [CWE-122] in FortiOS version 7.2.4 and below, version 7.0.11 and below, version 6.4.12 and below, version 6.0.16 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below, version 1.2 all versions, version 1.1 all versions SSL-VPN may allow a remote attacker to execute arbitrary code or commands via specifically crafted requests.
-
CVE-2024-21762
A out-of-bounds write vulnerability in Fortinet FortiOS 7.4.0 through 7.4.2, FortiOS 7.2.0 through 7.2.6, FortiOS 7.0.0 through 7.0.13, FortiOS 6.4.0 through 6.4.14, FortiOS 6.2.0 through 6.2.15, FortiOS 6.0 all versions, FortiProxy 7.4.0 through 7.4.2, FortiProxy 7.2.0 through 7.2.8, FortiProxy 7.0.0 through 7.0.14, FortiProxy 2.0.0 through 2.0.13, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specifically crafted requests
-
CVE-2020-25681
A flaw was found in dnsmasq before version 2.83. A heap-based buffer overflow was discovered in the way RRSets are sorted before validating with DNSSEC data. An attacker on the network, who can forge DNS replies such as that they are accepted as valid, could use this flaw to cause a buffer overflow with arbitrary data in a heap memory segment, possibly executing code on the machine. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
-
CVE-2005-3252
Stack-based buffer overflow in the Back Orifice (BO) preprocessor for Snort before 2.4.3 allows remote attackers to execute arbitrary code via a crafted UDP packet.
-
CVE-2016-10174
The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.
-
CVE-2007-5365
Stack-based buffer overflow in the cons_options function in options.c in dhcpd in OpenBSD 4.0 through 4.2, and some other dhcpd implementations based on ISC dhcp-2, allows remote attackers to execute arbitrary code or cause a denial of service (daemon crash) via a DHCP request specifying a maximum message size smaller than the minimum IP MTU.
-
CVE-2022-20705
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2016-6563
Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L.
-
CVE-2006-5276
Stack-based buffer overflow in the DCE/RPC preprocessor in Snort before 2.6.1.3, and 2.7 before beta 2; and Sourcefire Intrusion Sensor; allows remote attackers to execute arbitrary code via crafted SMB traffic.
-
CVE-2014-3936
Stack-based buffer overflow in the do_hnap function in www/my_cgi.cgi in D-Link DSP-W215 (Rev. A1) with firmware 1.01b06 and earlier, DIR-505 with firmware before 1.08b10, and DIR-505L with firmware 1.01 and earlier allows remote attackers to execute arbitrary code via a long Content-Length header in a GetDeviceSettings action in an HNAP request.
-
CVE-2014-7141
The pinger in Squid 3.x before 3.4.8 allows remote attackers to obtain sensitive information or cause a denial of service (out-of-bounds read and crash) via a crafted type in an (1) ICMP or (2) ICMP6 packet.
-
CVE-2022-22274
A Stack-based buffer overflow vulnerability in the SonicOS via HTTP request allows a remote unauthenticated attacker to cause Denial of Service (DoS) or potentially results in code execution in the firewall.
-
CVE-2022-20707
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2020-25682
A flaw was found in dnsmasq before 2.83. A buffer overflow vulnerability was discovered in the way dnsmasq extract names from DNS packets before validating them with DNSSEC data. An attacker on the network, who can create valid DNS replies, could use this flaw to cause an overflow with arbitrary data in a heap-allocated memory, possibly executing code on the machine. The flaw is in the rfc1035.c:extract_name() function, which writes data to the memory pointed by name assuming MAXDNAME*2 bytes are available in the buffer. However, in some code execution paths, it is possible extract_name() gets passed an offset from the base buffer, thus reducing, in practice, the number of available bytes that can be written in the buffer. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
-
CVE-2016-1287
Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.
-
CVE-2018-5378
The Quagga BGP daemon (bgpd) prior to version 1.2.3 does not properly bounds check the data sent with a NOTIFY to a peer, if an attribute length is invalid. Arbitrary data from the bgpd process may be sent over the network to a peer and/or bgpd may crash.
-
CVE-2014-9222
AllegroSoft RomPager 4.34 and earlier, as used in Huawei Home Gateway products and other vendors and products, allows remote attackers to gain privileges via a crafted cookie that triggers memory corruption, aka the "Misfortune Cookie" vulnerability.
-
CVE-2006-3838
Multiple stack-based buffer overflows in eIQnetworks Enterprise Security Analyzer (ESA) before 2.5.0, as used in products including (a) Sidewinder, (b) iPolicy Security Manager, (c) Astaro Report Manager, (d) Fortinet FortiReporter, (e) Top Layer Network Security Analyzer, and possibly other products, allow remote attackers to execute arbitrary code via long (1) DELTAINTERVAL, (2) LOGFOLDER, (3) DELETELOGS, (4) FWASERVER, (5) SYSLOGPUBLICIP, (6) GETFWAIMPORTLOG, (7) GETFWADELTA, (8) DELETERDEPDEVICE, (9) COMPRESSRAWLOGFILE, (10) GETSYSLOGFIREWALLS, (11) ADDPOLICY, and (12) EDITPOLICY commands to the Syslog daemon (syslogserver.exe); (13) GUIADDDEVICE, (14) ADDDEVICE, and (15) DELETEDEVICE commands to the Topology server (Topology.exe); the (15) LICMGR_ADDLICENSE command to the License Manager (EnterpriseSecurityAnalyzer.exe); the (16) TRACE and (17) QUERYMONITOR commands to the Monitoring agent (Monitoring.exe); and possibly other vectors related to the Syslog daemon (syslogserver.exe).
-
CVE-2022-20699
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2025-20333
A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.
-
CVE-2021-1472
Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2005-2799
Buffer overflow in apply.cgi in Linksys WRT54G 3.01.03, 3.03.6, and possibly other versions before 4.20.7, allows remote attackers to execute arbitrary code via a long HTTP POST request.
-
CVE-2017-6736
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.
-
CVE-2008-1491
Stack-based buffer overflow in the DPC Proxy server (DpcProxy.exe) in ASUS Remote Console (aka ARC or ASMB3) 2.0.0.19 and 2.0.0.24 allows remote attackers to execute arbitrary code via a long string to TCP port 623.
-
CVE-2021-22992
On BIG-IP versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.2.1, 14.1.x before 14.1.4, 13.1.x before 13.1.3.6, 12.1.x before 12.1.5.3, and 11.6.x before 11.6.5.3, a malicious HTTP response to an Advanced WAF/BIG-IP ASM virtual server with Login Page configured in its policy may trigger a buffer overflow, resulting in a DoS attack. In certain situations, it may allow remote code execution (RCE), leading to complete system compromise. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.
-
CVE-2014-1635
Buffer overflow in login.cgi in MiniHttpd in Belkin N750 Router with firmware before F9K1103_WW_1.10.17m allows remote attackers to execute arbitrary code via a long string in the jump parameter.
-
CVE-2018-7445
A buffer overflow was found in the MikroTik RouterOS SMB service when processing NetBIOS session request messages. Remote attackers with access to the service can exploit this vulnerability and gain code execution on the system. The overflow occurs before authentication takes place, so it is possible for an unauthenticated remote attacker to exploit it. All architectures and all devices running RouterOS before versions 6.41.3/6.42rc27 are vulnerable.
-
CVE-2023-25076
A buffer overflow vulnerability exists in the handling of wildcard backend hosts of SNIProxy 0.6.0-2 and the master branch (commit: 822bb80df9b7b345cc9eba55df74a07b498819ba). A specially crafted HTTP or TLS packet can lead to arbitrary code execution. An attacker could send a malicious packet to trigger this vulnerability.
-
CVE-2019-11542
In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2, 5.4RX before 5.4R7.1, 5.3RX before 5.3R12.1, 5.2RX before 5.2R12.1, and 5.1RX before 5.1R15.1, an authenticated attacker (via the admin web interface) can send a specially crafted message resulting in a stack buffer overflow.
-
CVE-2008-3558
Stack-based buffer overflow in the WebexUCFObject ActiveX control in atucfobj.dll in Cisco WebEx Meeting Manager before 20.2008.2606.4919 allows remote attackers to execute arbitrary code via a long argument to the NewObject method.
-
CVE-2021-1473
Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
-
CVE-2006-3252
Buffer overflow in the Online Registration Facility for Algorithmic Research PrivateWire VPN software up to 3.7 allows remote attackers to execute arbitrary code via a long GET request.
-
CVE-2013-1428
Stack-based buffer overflow in the receive_tcppacket function in net_packet.c in tinc before 1.0.21 and 1.1 before 1.1pre7 allows remote authenticated peers to cause a denial of service (crash) or possibly execute arbitrary code via a large TCP packet.
-
CVE-2005-1009
Multiple buffer overflows in BakBone NetVault 6.x and 7.x allow (1) remote attackers to execute arbitrary code via a modified computer name and length that leads to a heap-based buffer overflow, or (2) local users to execute arbitrary code via a long Name entry in the configure.cfg file.
CVEs that affect network gear, sorted by how likely they are to be exploited (EPSS).