Device CVEs.
Published CVEs that affect device software, ranked by exploit odds.
-
CVE-2026-69068
Insufficient length validation in the GNSS firmware loader may lead to corruption of kernel memory.
-
CVE-2026-68985
In the Samsung Exynos NPU driver, improper validation of user input in the ioctl handler can lead to an out-of-bounds write, which causes a denial of service.
-
CVE-2026-35494
In the baseband, memory corruption during NAS packet processing can cause a denial of service.
-
CVE-2026-47258
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-based out-of-bounds write exists in the Notification Class object implementation when handling AddListElement for the recipient-list property. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.
-
CVE-2026-45265
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1.
-
CVE-2026-123367
Thor Vector Graphics (ThorVG) is a production-ready vector graphics engine. Prior to 1.1.2, the bundled jpgd JPEG decoder accepts duplicate component selectors in an SOS scan header, causing each duplicate to increase m_blocks_per_mcu without checking the buffers sized from the frame components. A crafted grayscale JPEG can repeat its component in the SOS header, causing decode paths in src/loaders/jpg/tvgJpgd.cpp to write beyond heap buffers sized for one component. The issue is reachable through direct JPEG decoding and through JPEG images embedded in Lottie content, and confirmed impact is memory corruption followed by a process crash. This issue is fixed in version 1.1.2.
-
CVE-2026-47259
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a RemoveListElement request targeting Notification-Class.recipient-list can trigger a stack-based out-of-bounds write in the current master branch when the request contains more than NC_MAX_RECIPIENTS valid BACnetDestination elements. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.
-
CVE-2026-47710
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-buffer-overflow can be triggered in the current master branch when a Loop object reads a referenced property through its default timer path and the referenced property is OBJECT_STRUCTURED_VIEW / PROP_DESCRIPTION containing a long attacker-controlled string. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.
-
CVE-2026-94395
A stack-based buffer overflow in Thales SafeNet Authentication Client (SAC) SIS token engine processing can be triggered by a malicious physical or software-emulated smart card. The issue can occur before authentication or PIN entry and may cause a denial of service or potentially arbitrary code execution with the privileges of the affected process. Affected releases start with SAC 10.8 R7 and include SAC 10.9 R3 GA (build 10.9.7449).
-
CVE-2026-114044
FreeRDP before 3.32.1 contains a heap out-of-bounds read vulnerability in the Android client that allows malicious RDP servers to read beyond surface buffers by supplying unvalidated mappedWidth and mappedHeight values. Attackers can send a crafted RDPGFX_MAP_SURFACE_TO_WINDOW_PDU with oversized dimensions, causing android_UpdateWindowFromSurface to copy heap memory beyond the allocation, leading to crashes or memory disclosure.
-
CVE-2026-48183
Improper permission handling during buffer operations allows untrusted applications to create memory mappings with inappropriate permissions
-
CVE-2026-80335
Memory Corruption when processing firmware update data in Download mode due to a missing bounds check.
-
CVE-2026-20499
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01857954; Issue ID: MSV-8247.
-
CVE-2026-20545
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01879158 / MOLY01774038; Issue ID: MSV-9811.
-
CVE-2026-20546
In Modem, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01876654 / MOLY01774038; Issue ID: MSV-9803.
-
CVE-2026-20547
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01874018 / MOLY01774038; Issue ID: MSV-9802.
-
CVE-2026-20548
In Modem, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01872867 / MOLY01774038; Issue ID: MSV-9801.
-
CVE-2026-20549
In Modem, there is a possible out of bounds write due to improper input validation. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01775865; Issue ID: MSV-8895.
-
CVE-2026-116258
A vulnerability was identified in libimobiledevice up to 1.4.0. This affects an unknown part of the file src/afc.c of the component AFC. Such manipulation leads to heap-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-19319
IBM Watson Speech Services Cartridge 4.0.0 through 5.4.0 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read.
-
CVE-2026-121942
ZBar through 0.23.95 contains an out-of-bounds read vulnerability in _zbar_sq_decode() in zbar/sqcode.c that allows attackers to read heap memory outside the image buffer via crafted SQ code images. Attackers can supply an image with a skewed SQ code finder pattern near the edge, producing unchecked sample coordinates that crash the decoder and leak bytes into output.
-
CVE-2026-85034
The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the received ATT PDU. bt_att_recv() in subsys/bluetooth/host/att.c validates only a minimum PDU length and does not enforce the negotiated ATT MTU, and the fixed ATT L2CAP channel in subsys/bluetooth/host/l2cap.c applies no rx.mtu check either, so the only ceiling was the ACL reassembly buffer CONFIG_BT_BUF_ACL_RX_SIZE. Values longer than the 512-octet maximum attribute length defined by the Bluetooth Core Specification (Vol 3, Part F, Section 3.2.9) could therefore be handed to subscribers that size their buffers to that documented limit. A remote peer that a device has connected and subscribed to — a malicious, spoofed or compromised GATT server within radio range — triggers the flaw by sending a notification or indication whose value exceeds 512 octets on a subscribed handle. In the LE Audio unicast client this reaches a concrete out-of-bounds write: unicast_client_ep_notify() in subsys/bluetooth/audio/bap_unicast_client.c copies the notification into the 512-byte att_buf of struct unicast_client with net_buf_simple_add_mem() and no tailroom check whenever length equals bt_audio_get_max_ntf_size(), i.e. the negotiated ATT MTU minus three. notify_handler() in subsys/bluetooth/audio/bap_broadcast_assistant.c has the same shape. Reaching the overflow requires a build whose ATT MTU exceeds 515 octets (CONFIG_BT_L2CAP_TX_MTU and CONFIG_BT_BUF_ACL_RX_SIZE set for full-length attribute support); the shipped defaults are far smaller. The overflow writes peer-controlled bytes past att_buf directly over the adjacent struct net_buf_simple net_buf — its data, __buf, len and size fields — which the subsequent long-read accumulation then uses as its destination, turning a small linear overflow into a controlled write. net_buf_simple_add() only asserts on insufficient tailroom unless CONFIG_NET_BUF_HARDENING is enabled, and that option is disabled by default, so ordinary production builds perform the copy. Beyond the in-tree LE Audio clients, any application subscriber that sized its receive buffer to the specification's 512-octet limit was exposed to the same overflow. The fix rejects notification, indication and multiple-notification values longer than BT_ATT_MAX_ATTRIBUTE_LEN in call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c before any subscriber callback is invoked, so no subscriber can be handed more than the specified maximum. Remaining tuples of a multiple handle value notification are still delivered and oversized indications are still confirmed.
-
CVE-2026-118603
Alpine iLX-F511 vCard Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected Alpine iLX-F511 devices. User interaction is required to exploit this vulnerability in that the target must connect to a malicious Bluetooth device. The specific flaw exists within the parsing of vCard data. The issue results from the lack of proper validation of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29017.
-
CVE-2026-118605
Alpine iLX-F511 prh_sdp_service_search_decode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the prh_sdp_service_search_decode function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29069.
-
CVE-2026-75615
ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, the ACN runtime function Acn_Dec_String_CharIndex_private in asn1crt/asn1crt_encoding_acn.c and the generated uPER decoder InternalItem_string_with_alpha_decode in StgC/uper_c.stg do not validate a decoded character index before reading allowedCharSet. For string alphabets whose size is not a power of two, a crafted message can select an unused encoded index, read a small bounded window of adjacent static program constants, and return the byte as a successfully decoded character. The full 128-character IA5String alphabet is not affected. This issue is fixed in version 4.7.0.1.
-
CVE-2026-20556
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01876662; Issue ID: MSV-9833.
-
CVE-2026-20557
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01877236; Issue ID: MSV-9804.
-
CVE-2026-20562
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01775984; Issue ID: MSV-8907.
-
CVE-2026-82389
In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed. The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer's SDP record requires no pairing, and the peer can also trigger the failure by dropping the ACL or racing an RFCOMM DLC on the same DLCI at the right moment. When the SDP client next advances its request list, sdp_client_discover() dereferences the zeroed parameters — net_buf_alloc(param->pool, …) with a NULL pool and param->uuid->type — and the result-notification paths call through the NULL params->func. Zeroing a linked node also truncates the request list behind a stale tail pointer, and re-arming the freed AG slot re-appends the same node and can produce a self-looping list that hangs the Bluetooth RX thread. The impact is a crash or hang of the Bluetooth stack; the written value is a constant zero at a fixed static address, so no attacker-controlled write is available. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_AG that use the Audio Gateway role are affected.
-
CVE-2026-79982
The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool. The device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path through LE Extended Advertising Report events, which the controller fragments only to CONFIG_BT_BUF_EVT_RX_SIZE. In the stock configuration the overflow is already reached without any radio traffic: the mandatory Read Supported Commands command-complete event is 70 bytes and overruns the 64-byte slot by six bytes on every host initialization. Because net_buf_add_mem() validates tailroom only through an assertion unless CONFIG_NET_BUF_HARDENING is enabled, builds with CONFIG_ASSERT=n — the usual production setting — silently corrupt memory adjacent to the USB buffer pool with attacker-chosen contents, which on a target without memory protection between subsystems can lead to arbitrary code execution. Builds with assertions enabled fail the assertion instead and panic, giving a remotely triggerable denial of service. The fix introduces a separate bt_hci_tx_pool sized to MAX(BT_BUF_ACL_RX_SIZE, BT_BUF_EVT_RX_SIZE) for the controller-to-host direction while leaving the host-to-device pool at the endpoint packet size, which is already bounds-checked during reassembly.
-
CVE-2026-90832
bt_hci_le_per_adv_report_common() in subsys/bluetooth/host/scan.c handles the HCI_LE_Periodic_Advertising_Report (and _v2) event. It verified that the fixed event header was present and that the controller-declared Data_Length fits the tailroom of the periodic-sync reassembly buffer, but never checked that the event actually carried as many data bytes as evt->length claims. Both reassembly paths — DATA_STATUS_PARTIAL, and DATA_STATUS_COMPLETE while a chain is already in progress — then called net_buf_simple_add_mem(&per_adv_sync->reassembly, buf->data, evt->length), copying up to 255 bytes starting past the end of the event's real payload. The Data_Length field originates in the HCI controller, so the flaw is reachable in host-only/split builds where the controller is a separate part reached over H4 UART, SPI, USB or an inter-core IPC transport: a malicious, compromised or buggy controller (or an attacker able to inject on that link) can send a report declaring a length larger than the event payload. The generic event dispatcher in subsys/bluetooth/host/hci_core.c only enforces a per-event minimum length and never cross-checks the subevent's internal length field, so nothing else catches it. Builds using Zephyr's own in-image controller are not affected, because the controller always emits a length matching the bytes it appends. Exploitation additionally requires CONFIG_BT_PER_ADV_SYNC with CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 (the option defaults to 0, which compiles the reassembly block out; LE Audio broadcast-sink and Public Broadcast Profile applications that reassemble fragmented periodic advertising data set it), and an established periodic advertising sync. The consequence is an out-of-bounds read of adjacent HCI RX-pool memory — including stale contents of previously received HCI events — which is copied into the reassembly buffer and then delivered to every registered bt_le_per_adv_sync_cb.recv listener as if it were received advertising data, so the disclosed memory becomes application-visible and may be forwarded off-device. The write side remains in bounds because the tailroom check uses the same length value, so there is no memory corruption; impact is limited to information disclosure and undefined behaviour on the over-read. The fix drops any report whose declared length exceeds the remaining event payload, matching the guard already present in the extended and legacy advertising report handlers.
-
CVE-2026-120451
libgphoto2 through 2.5.34 contains stack-based and heap-based buffer overflow vulnerabilities in jl2005c_init() that allow malicious USB devices to corrupt memory by supplying an unbounded allocation table entry count. Attackers can connect a spoofed Jeilin JL2005B/C/D camera reporting 1022 or more entries to overwrite the saved return address and heap data, potentially achieving code execution.
-
CVE-2026-59007
In decode_packed_entry_number of codebook.c, there is a possible out-of-bounds read due to a logic error in the code. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
-
CVE-2026-52786
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
-
CVE-2026-46677
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a client-side out-of-bounds read in the AtomicReadFile-ACK record-access handling path. The issue is caused by a mismatch between a remote returnedRecordCount value and the fixed local fileData[] array capacity in BACNET_ATOMIC_READ_FILE_DATA. The ACK decode path preserves the remote RecordCount, discards storage for excess records without truncating that count, and a downstream sink later iterates over the original RecordCount and indexes fileData[i] out of bounds. This issue has been patched in versions 1.4.4 and 1.5.1.
-
CVE-2026-20585
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01338165; Issue ID: MSV-9660.
-
CVE-2026-20563
In Modem, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01777997; Issue ID: MSV-8905.
-
CVE-2026-20560
In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01870543; Issue ID: MSV-9070.
-
CVE-2026-48176
A memory corruption vulnerability caused by improper validation of messages
-
CVE-2026-21162
Out-of-bounds write in libiosotglib.so prior to version 3.7.73.4 allows physical attackers to execute arbitrary code. User interaction is required for triggering this vulnerability.
-
CVE-2026-48178
Out of bound access in PPC due to race condition in global variable access
-
CVE-2026-20561
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01750090; Issue ID: MSV-8908.
-
CVE-2026-82944
SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution.
-
CVE-2026-82388
bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation. The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, so a remote device advertising an HFP AG record with an RFCOMM channel outside 1-30 makes bt_rfcomm_dlc_connect() return -EINVAL and drives the local device into the wipe. The same branch is reached without any application misuse when the remote peer controls connection timing, for example when the RFCOMM session is in BT_RFCOMM_STATE_DISCONNECTING or the ACL is dropped between object creation and the RFCOMM call. Once the object has been wiped, the Bluetooth host continues to use it: sdp_client_alloc_buf() dereferences session->param->pool, which is now NULL, and the SDP receive paths call session->param->func() through a null function pointer, neither of which is NULL-checked. Because the wipe also clears hf->acl, the pool slot is considered free and a retry or an incoming HFP connection re-appends the same still-linked list node, turning session->reqs into a self-referential list that the host's list walkers never leave. The result is a fault or an unrecoverable hang in the Bluetooth host thread; the stray indirect call is through an all-zero pointer whose target the attacker does not control, so the practical impact is denial of service. The fix keeps the object allocated and marks it with a new BT_HFP_HF_FLAG_RELEASING flag, letting bt_hfp_hf_discover_cb() release it once the discovery completes instead of destroying it under the SDP client. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_HF enabled are affected.
-
CVE-2026-20555
In Modem, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01876664; Issue ID: MSV-9834.
-
CVE-2026-78116
The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return. Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice. The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient. Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected.
-
CVE-2026-68984
In the Samsung Exynos NPU kernel driver, an integer overflow allows an unprivileged application to trigger memory corruption.
-
CVE-2026-20554
In Modem, there is a possible system crash due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: MOLY01911177; Issue ID: MSV-10122.
-
CVE-2026-18748
The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes.
-
CVE-2026-85647
A maliciously crafted DWG file containing a malformed embedded image, when parsed through Autodesk AutoCAD, can force a Heap-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.
CVEs that affect device, sorted by how likely they are to be exploited (EPSS).