The internet is broken right now.
113 critical CVEs without a fix in the last 48 hours. Developers are crying quietly into their IDEs. 32 more already have a fix that someone still has to apply.
-
CVE-2026-118153
Inefficient algorithmic complexity in Microsoft Exchange Server allows an unauthorized attacker to deny service over a network.
-
CVE-2026-118207
Improper input validation in Microsoft Exchange Server allows an authorized attacker to execute code over a network.
-
CVE-2026-105719
Improper input validation in Microsoft Office SharePoint allows an authorized attacker to disclose information over a network.
-
CVE-2026-118151
External control of file name or path in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-118154
Reliance on untrusted inputs in a security decision in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-67387
Untrusted pointer dereference in SQL Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-70267
Inclusion of functionality from untrusted control sphere in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.
-
CVE-2026-118157
Weak authentication in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-118208
Improper access control in Microsoft Exchange Server allows an authorized attacker to perform spoofing over a network.
-
CVE-2026-92386
When writing a long cookie name and value to a Netscape cookie jar, a remote HTTP server can make `curl` write a record that exceeds its line-length parsing limit. Consequently, any subsequent `curl` invocation reading from that same cookie jar using `--cookie` silently aborts parsing prematurely upon encountering the too long line, ignoring all subsequent valid cookies in the file.
-
CVE-2026-87864
Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in the `IMAP APPEND {N}` literal while transmitting line-ending expanded data. The server reads only $N$ bytes for the payload, causing the remaining overflow bytes to be interpreted and executed as pipelined IMAP commands within the authenticated session.
-
CVE-2026-86412
A remote HTTP server can set a cookie that curl accepts and writes to a Netscape cookie jar but cannot reload. On the next invocation using the same path for `--cookie` and `--cookie-jar`, curl fails before connecting, then the cleanup procedure replaces the jar with an empty file, deleting cookies for unrelated domains.
-
CVE-2026-116934
Untrusted pointer dereference in SQL Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-118108
Improper authorization in SQL Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-116929
Execution with unnecessary privileges in SQL Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-85249
Improper Input Validation vulnerability in Apache Camel Tika component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Tika producer mapped every metadata key parsed out of the submitted document onto the Exchange as a header, with no filter applied. Document metadata is attacker-controlled content: the party that supplies the file chooses the metadata keys it carries. A crafted document could therefore set Exchange headers that the rest of the route depends on, including headers in the Camel namespace such as CamelFileName, which downstream components use to decide where content is written. The pattern is the same header-injection class as the consumer advisories published previously, reached here through parsed file content rather than through a protocol header. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Parsed document metadata is now filtered through a HeaderFilterStrategy before it is mapped onto the Exchange. A route that was reading a metadata-derived header the filter now blocks will see it missing. For deployments that cannot upgrade immediately, strip the Camel namespace after the Tika producer with removeHeaders("Camel*") before any component that acts on those headers.
-
CVE-2026-113605
Stirling-PDF from 2.13.2 through 3.2.0 contains an incomplete denylist in DatabaseService.validateSqlContent() that allows administrators to bypass H2 import restrictions using CREATE OR REPLACE ALIAS. Authenticated administrators can upload a crafted SQL backup to the import-database endpoint, where RUNSCRIPT defines H2 Java function aliases and restores Java-method execution.
-
CVE-2026-109411
An access control bypass flaw was identified in Samba's vfs_ceph_rgw module in it's openat() function. An authenticated user can bypass access controls to read or overwrite restricted files on shares configured with the experimental vfs_ceph_rgw module. When a client requests an existing file using mismatched character casing, the module fails to perform a case-insensitive lookup correctly, causing the server to treat the operation as creating a new file. As a result, the server skips standard permission checks on the existing file, allowing the attacker to access or overwrite sensitive data owned by other users.
-
CVE-2026-84010
Exposed dangerous method or function in SQL Server allows an authorized attacker to elevate privileges over a network.
-
CVE-2026-105476
Improper link resolution before file access in cPanel allows remote authenticated users to write arbitrary root-owned files and escalate privileges.
-
CVE-2026-92390
When invoked with `--remote-header-name` (`-J`), curl fails to preserve its documented anti-clobbering protection if an intermediate 103 Early Hints response precedes the final HTTP response, or if an `ETag` header is processed before `Content-Disposition` under `--etag-save`. This flaw allows an HTTP(S) server to overwrite an existing local file specified in the `Content-Disposition` header despite the presence of the `-J` non-overwrite constraint.
-
CVE-2026-125117
Mongoose is a MongoDB object modeling tool designed to work in an asynchronous environment. Prior to 6.13.12, 7.8.13, 8.24.7, and 9.11.4, Mongoose can descend into inherited properties while loading database documents in init(), setting dotted paths in $__set, and merging update documents in utils.mergeClone. Attacker-controlled keys such as toString or valueOf can therefore cause Mongoose to write into shared built-in functions instead of an own property. A crafted document, Mixed path, non-strict document or subdocument, findOneAndReplace() replacement, chained update, or Query.prototype.merge() source can overwrite Object.prototype.toString.call, causing later queries on unrelated models to fail until the process restarts. Separately, when an attacker controls the dotted path passed to doc.set(path, value) for a subdocument configured with strict: false, descent through $__set can reach $__schema and alter shared validators or schema options for later documents. Mongoose already blocks __proto__, constructor, and prototype, so this issue overwrites properties on reachable shared objects rather than adding new properties directly to Object.prototype. This issue is fixed in versions 6.13.12, 7.8.13, 8.24.7, and 9.11.4.
-
CVE-2026-17323
IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote attacker to obtain sensitive information due to XML external entity (XXE) injection.
-
CVE-2026-114107
HKUDS Vibe-Trading from 0.1.0 before 0.1.7 contains an indirect prompt injection vulnerability that allows remote attackers to execute shell commands as root by planting instructions in documents or web pages the agent processes. BashTool and BackgroundRunTool pass model-emitted commands to subprocess.run with shell=True and no allow-list or approval step, and read_url fetches arbitrary URLs, enabling command execution and server-side request forgery.
-
CVE-2026-105298
Summary Before version 0.9.0, Pingora accepted HTTP/2 requests whose Host header differed from the :authority pseudo-header. Request filters, cache keys, and logs that read the request URI (session.req_header().uri) saw the :authority value, but the upstream received the client-supplied Host value. Pingora also accepted :authority values containing userinfo (for example, [email protected]). This violates RFC 9113 Section 8.3.1, which requires an intermediary to use the :authority value for Host and replace any existing Host field. Root cause * HTTP/2 to HTTP/1.1: Host was generated from :authority only when the request had no Host header, so a conflicting client Host was forwarded unchanged. * HTTP/2 to HTTP/2: the client Host header was removed and used to overwrite the upstream :authority, after request filters had already run against the original :authority. * The HTTP/2 server did not compare Host with :authority and did not reject userinfo in the authority. Impact A remote, unauthenticated attacker can send a single HTTP/2 request that the application sees as one host and the upstream receives as another. Where request filters, access controls, or cache keys use the URI authority and the upstream routes by Host, this can lead to: * Cache poisoning: a response from another virtual host is stored under the victim host's cache key and served to other users (this also requires the upstream to serve different content per Host). * Host-based access control bypass: a request approved for one host is served by a different virtual host on the upstream. Deployments that do not accept HTTP/2 from clients, or that do not use the request authority for security or caching decisions, are not affected. Note that Cloudflare CDN customers were unaffected, as internal Pingora services at Cloudflare do not have HTTP/2 clients. Mitigation: * Upgrade to pingora 0.9.0 or later. Pingora now returns 400 Bad Request for HTTP/2 requests whose Host differs from :authority, that contain more than one Host, or whose authority contains userinfo, and keeps the upstream Host or :authority consistent with the request authority. Fix commits: https://github.com/cloudflare/pingora/commit/915590a91811877795531f6ba0927a3138b5cb4b , https://github.com/cloudflare/pingora/commit/ffab8302d08d4292d1924eb8fe84647fd5cb8e76 * If you cannot upgrade: in request_filter, reject HTTP/2 requests that carry a Host header different from the URI authority, or whose authority contains '@'.
-
CVE-2026-86147
External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time. Root Cause: 1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory. 2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time. Affected Scenarios: Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3523 Note: After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner.
-
CVE-2026-119922
Improper access control in the Babelfish for PostgreSQL extension versions 1.2-1.5, 2.1-2.15, 3.1-3.12, 4.0-4.8, 5.1-5.4 and in Amazon Aurora PostgreSQL with Babelfish may allow remote authenticated users to elevate their privileges. To remediate this issue, we recommend users upgrade to Babelfish for PostgreSQL extension versions 4.10, 5.6, 6.1 or later. Customers using Amazon Aurora PostgreSQL with Babelfish should upgrade their cluster to Aurora PostgreSQL 13.9.16 (1.5.5), 13.23.3 (1.17.2), 14.6.16 (2.3.5), 14.17.8 (2.12.4), 14.18.6 (2.13.3), 14.19.5 (2.14.2), 14.20.5 (2.15.2), 14.22.3 (2.16.1), 14.23.1 (2.17.0), 15.10.8 (3.8.4), 15.12.8 (3.9.4), 15.13.6 (3.10.3), 15.14.5 (3.11.2), 15.15.5 (3.12.2), 15.17.3 (3.13.1), 15.18.1 (3.14.0), 16.8.8 (4.5.5), 16.9.6 (4.6.3), 16.10.5 (4.7.2), 16.11.5 (4.8.2), 16.13.3 (4.9.1), 16.14.1 (4.10.0), 17.4.8 (5.1.4), 17.5.6 (5.2.3), 17.6.5 (5.3.2), 17.7.5 (5.4.2), 17.9.3 (5.5.1), 17.10.1 (5.6.0), 18.3.4 (6.0.2), 18.4.1 (6.1.0) or later, and apply any pending maintenance to ensure they are on the latest patch.
-
CVE-2026-85314
Improper Input Validation vulnerability in Apache Camel Mail component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. CVE-2026-46584 addressed mail headers reaching the Exchange without passing through a header filter, but the MimeMultipart data format retained an unfiltered path: unmarshalling a multipart message mapped mail.smtp headers onto the Exchange with no filter applied. Those names sit outside the Camel namespace that consumer filters block, so a message crafted by an external sender could still set them, and the mail.smtp namespace influences how a downstream mail producer connects and sends. This is an incomplete fix of CVE-2026-46584 rather than a new class of defect: a deployment that applied that advisory and considered camel-mail settled remained exposed on this path. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The MimeMultipart data format now applies the header filter on unmarshal, closing the path CVE-2026-46584 left open. For deployments that cannot upgrade immediately, strip the namespace after the data format with removeHeaders("mail.smtp*") before any mail producer.
-
CVE-2026-85312
Improper Input Validation vulnerability in Apache Camel Core component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The saga processor consulted a header named Long-Running-Action to decide which saga an exchange belonged to. The name carries no Camel prefix, so it sits outside the namespace that consumer header filters block, and an external sender could supply it on an inbound message. That let the sender name the saga the exchange joined, attaching their request to a long-running action started by someone else, or causing compensation to be associated with an action they did not initiate. The header is only consulted by a saga service that uses it, which bounds the exposure to deployments running sagas over an LRA coordinator. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The header is now consulted only for a saga service that actually uses it, rather than on every exchange. For deployments that cannot upgrade immediately, strip the header at the trust boundary with removeHeaders("Long-Running-Action") on every consumer that accepts messages from an untrusted sender.
-
CVE-2026-97782
Observable discrepancy in Microsoft Office SharePoint allows an authorized attacker to perform tampering over a network.
-
CVE-2026-113709
Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From 2.1.0 until 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2, when an operator has enabled --enable-helm for kustomize build, helmGlobals.configHome can point Helm's config and data directories at a repository-controlled location. Helm automatically loads a downloader plugin from `<configHome>/.data/plugins` without a separate plugin-install step and executes its program inside argocd-repo-server when a helmCharts repository URL uses the plugin's protocol. The command runs as the repo-server user and can read repository credentials and other process-accessible data. An attacker can commit the Kustomization and plugin to a Git repository that an Application builds or upload the files through POST /api/v1/applications/manifestsWithFiles, also exposed by argocd app diff --local --server-side-generate. The upload path requires only Application get permission on an existing Application, without Application update or sync permission or repository write access. Both delivery paths require prior operator enablement of --enable-helm; deployments that do not enable it are not affected. Kustomize 4.1.0 first passed helmGlobals.configHome through to Helm. This issue is fixed in versions 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2.
-
CVE-2026-111821
Improper input validation vulnerability in Apache ActiveMQ, Apache ActiveMQ KahaDB. A user can create a durable subscription with a clientId and subscription name that have a combined length > 65,535 (while separately being shorter) on a broker using KahaDB which can cause the broker to shutdown and be unrecoverable. This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; Apache ActiveMQ KahaDB: from 6.0.0 before 6.3.3, before 5.19.12. Users are recommended to upgrade to version 6.4.0, 6.3.3 or 5.19.12, which fixes the issue.
-
CVE-2026-126626
The web services listener of Progressive Robot hMailServer 6.3.3 through 6.3.7 counts every failed CardDAV, CalDAV or Autodiscover sign-in from a proxy it trusts - one on the same machine, or one named in WebServicesTrustedProxies, whose X-Forwarded-Proto it believes - against the proxy's own address, which allows a remote unauthenticated attacker who can reach the proxy to have that address banned from the server's mail listeners. The listener, off by default (WebServicesHttpPort and WebServicesHttpsPort 0), signs an account in with HTTP Basic over HTTPS for CardDAV from 6.3.3 and for CalDAV and Outlook Autodiscover from 6.3.4. Behind a TLS-terminating proxy, which the server trusts when it is on the same machine or named in WebServicesTrustedProxies, the listener takes the client's HTTPS from the proxy's X-Forwarded-Proto header, but it does not believe X-Forwarded-For and sees the proxy's address for every client. Each failed sign-in counted towards the auto-ban against that address, so that failed sign-ins through the proxy from anybody, under any user name, reaching MaxInvalidLogonAttempts (3 within 30 minutes by default) wrote an IP range that refused the proxy's address at the SMTP, POP3, IMAP and ManageSieve listeners for AutoBanMinutes (60 by default), and could write it again each time it lapsed. For a proxy on the same machine that address is the loopback address, so that a webmail on that machine, local scripts that submit mail and the other local clients of the mail listeners were shut out; for a proxy at another address that also carries mail, every mail client behind it was. Such a proxy forwarding to the listener's HTTPS port, re-encrypting, was counted against in the same way, and listing it in WebServicesTrustedProxies did not spare it. The auto-ban is on by default and AutoBanNeverBan, which spares an address, is empty by default; the listener itself went on serving the proxy.
-
CVE-2026-121629
A flaw was found in GStreamer's adaptive streaming demuxers (HLS, DASH, MSS). When processing a media playlist or manifest, URIs referenced in the manifest content are fetched without restricting which URI schemes are permitted. An attacker who controls a manifest URL, or who can inject content into an HTTP manifest response, can include file:// URIs pointing to arbitrary local files, causing the affected application to read and process those files. In automated or server-side deployments such as media recorders, proxies, and downloaders, this can lead to disclosure of sensitive local files. Existence of files can also be inferred through differing error responses even when content is not directly observable.
-
CVE-2026-65059
Furl versions before 3.16 for Perl allow memory exhaustion via unbounded decompression of HTTP responses. Furl inflates a response body sent with a gzip, x-gzip or deflate Content-Encoding and appends the output to the response string with no size limit. It does this whether or not the request asked for compression, and no option caps the decompressed size. Responses read with write_file or write_code are streamed rather than held in memory. A malicious server, or an attacker on a plain HTTP connection, can send a small compressed response that expands to exhaust the client's memory and end the process.
-
CVE-2026-17394
IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to obtain sensitive information due to improperly controlled modification of object attributes. A user-supplied value could change an access-related setting that should be controlled by the system, which could expose sensitive information.
-
CVE-2026-110310
A remote user who can read encrypted objects in the S3 bucket can force a padding downgrade by altering the padding scheme recorded in an object's metadata to legacy PKCS#1 v1.5. Since this padding scheme is susceptible to the well-known Bleichenbacher attack, the user can use a PKCS#1 v1.5 padding oracle to recover the RSA-wrapped envelope key and decrypt the object. To remediate this issue, we recommend that users upgrade to version 3.2.2 or 4.0.3. The 1.x and 2.x lines will not be patched, users of those lines need to migrate to 3.2.2 or 4.0.3.
-
CVE-2026-55458
Caddy is an extensible server platform that uses TLS by default. Prior to 2.11.5, the reverse proxy's finalizeResponse method in modules/caddyhttp/reverseproxy/reverseproxy.go handles an upstream 101 Switching Protocols response before running removeConnectionHeaders and the hopHeaders deletion loop used for ordinary responses. The early return invokes handleUpgradeResponse, which copies the upstream headers to the client and normalizes only WebSocket-specific header names. An attacker who controls or compromises a proxied WebSocket upstream can therefore cause hop-by-hop headers such as Alt-Svc, Keep-Alive, and Proxy-Authenticate, as well as headers named by Connection, to cross the proxy boundary. For HTTP/2 or HTTP/3 extended CONNECT, the upstream 101 response may be represented to the client as an ordinary successful response, increasing the chance that leaked headers are processed. This issue is fixed in version 2.11.5.
-
CVE-2026-34157
Wails is a framework for building desktop applications using Go and web technologies. From 2.0.0 until 2.13.0, BindingsAllowedOrigins in v2/internal/frontend/originvalidator/originValidator.go passes wildcard patterns to wildcardPatternToRegex, which expands every asterisk to an unrestricted regular-expression match. When an application configures a trailing or partial-label wildcard immediately after an allowed domain, an attacker-controlled lookalike origin can match the allowed suffix and invoke bound Go methods through IPC. A complete-component subdomain wildcard is an unaffected configuration. The resulting confidentiality, integrity, and availability impact depends on the file, database, command, credential, or other operations exposed by the application's bound methods. This issue is fixed in version 2.13.0.
-
CVE-2026-16884
IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote attacker to obtain sensitive information due to an XML external entity (XXE) injection.
-
CVE-2026-91184
Description NGINX Gateway Fabric has a vulnerability when it renders the spec.basic.realm (and spec.jwt.realm) field of a namespaced AuthenticationFilter verbatim, unescaped and unvalidated, into the shared data-plane nginx.conf as auth_basic "<realm>";. A namespaced authenticated attacker that configures AuthenticationFilter CRD to an HTTPRoute/GRPCRoute on a shared Gateway can craft a realm value that closes the quoted directive and the enclosing location {} block and injects arbitrary NGINX directives into that Gateway's data-plane config. Impact A remote authenticated attacker can send crafted requests to configure NGINX Gateway Fabric AuthenticationFilter CRD and may be able to read every co-located tenant's mounted secrets, SSRF via proxy_pass, reading the pod ServiceAccount token, or hijacking other tenants' routes. There is no data plane exposure; this is a control plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
-
CVE-2026-116339
A vulnerability was determined in iFlytek astron-agent up to 1.1.2. This affects an unknown function of the file core/memory/database/api/v1/exec_ddl.py of the component DDL Whitelist Handler. This manipulation causes incomplete blacklist. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-112343
Syncplify Server! before 8.8.0 contains an access control bypass vulnerability that allows authenticated SFTP users to evade per-path permission overrides by exploiting case-insensitive filesystem path resolution and 8.3 short names. Attackers can address a protected directory using alternate capitalization or its 8.3 short name to perform file uploads and downloads that the configured override is intended to deny, resulting in unauthorized file access.
-
CVE-2026-114442
Apache HertzBeat versions 1.7.1, 1.7.2, 1.7.3, 1.8.0, and 1.9.0 have incomplete XPath expression validation in the HTTP collector XML parsing path. An authenticated user with permission to create monitor templates can supply XPath expressions through metrics.aliasFields that are evaluated without the validation applied to parseScript. When processing a crafted XML response, repeated evaluation may consume excessive CPU resources and impair collector availability. This is a follow-up to the incomplete fix for CVE-2026-24343. The fix is included in Apache HertzBeat 1.9.1. Users should upgrade to 1.9.1 or a later version.
-
CVE-2026-119364
ProFTPD through 1.3.9e and 1.3.10rc1 through 1.3.10rc4 contains a link-following vulnerability in mod_copy that allows authenticated FTP users to bypass Limit WRITE restrictions via symlinks. Attackers can place a symlink in a writable directory and use SITE COPY or SITE CPTO to overwrite files in write-denied locations.
-
CVE-2026-84747
Interpretation conflict in the HTTP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to bypass access control rules enforced by a front proxy. Root Cause: The method dispatch function FindMethodPropertyByURI() in bRPC's HTTP protocol splits the request path with a string splitter that skips empty fields, so paths containing empty path segments (consecutive slashes), such as //flags, /flags// and /flags//port, are dispatched to the same method as their collapsed form /flags. Per RFC 3986 these are distinct paths. A front proxy that enforces an ACL (e.g. blocking access to builtin services such as /flags) matches the collapsed form only, and therefore forwards the padded literal to the bRPC server, where it is dispatched as if it were the collapsed form. This differential allows //flags?setvalue= to reach a builtin service that /flags is not allowed to reach. Additionally, the HTTP/2 implementation never validated the :path pseudo-header, so requests without a :path, or with a :path that neither begins with '/' nor is the asterisk-form '*', contrary to RFC 9113 section 8.3.1, were not rejected. Affected Scenarios: Deployments of Apache bRPC behind a front proxy or gateway that performs access control (ACL) decisions on the literal request path, where the bRPC server accepts HTTP or HTTP/2 traffic from that proxy. In such deployments an attacker can send a path containing empty path segments to reach a resource that the front proxy intended to block. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3512 Note: After applying the fix, HTTP and HTTP/2 request paths containing empty path segments (consecutive slashes) are rejected by default, and HTTP/2 :path values that are empty or neither begin with '/' nor equal '*' are rejected. Deployments that depend on the previous lenient behavior can restore it by turning on the gflag -http_allow_empty_path_segments, which is not recommended for servers exposed to untrusted traffic.
-
CVE-2026-119636
Improper release of expired privileged access checkouts in the PAM scheduled check-in task in Devolutions Server 2025.3.2.0 through 2026.2.22.0 allows an authenticated user with checkout rights on a PAM account to retain access to that account on the target system after the checkout expires via a backlog of 21 or more newer active checkouts that prevents the expired checkout from being checked in and its password from being rotated.
-
CVE-2026-82819
A vulnerability in Cerberus FTP Server allows an authenticated remote attacker to perform UNC path injection via a manipulated parameter. By supplying a malicious SMB share path, an attacker can execute authentication coercion against the underlying server, resulting in the leakage of the Cerberus service account's Net-NTLMv2 hash. This issue has been resolved in Cerberus FTP Server: 2026.3.0.
-
CVE-2026-108070
A vulnerability involving improper access control in the TSplus Remote Access web server that allows an unauthenticated remote attacker to access internal resources protected by manipulated paths through the /socket.io/JWN/ endpoint, bypassing the access restrictions intended for certain internal resources.
-
CVE-2026-125327
pgEdge RAG Server is an API server for retrieval-augmented generation over PostgreSQL content using pgvector. Prior to 2.0.0, the unauthenticated query endpoint uses FetchDocuments in internal/database/search.go to read the entire filtered corpus without a LIMIT and rebuild an in-memory BM25 index on every request. Because HybridEnabled is set by default in internal/config/loader.go and the endpoint has no rate limit, inexpensive remote queries can impose database and CPU work proportional to corpus size and exhaust service resources. This issue is fixed in version 2.0.0.