CVE-20XX-?
agent?

CVEs of 2026.

Every CVE published in 2026 that we hold, ranked by exploit odds.

4,303 CVEs · updated 2026-11-21 00:48 UTC

Reset all
  1. CVE-2026-99790

    In the Linux kernel, the following vulnerability has been resolved: NFSD: stop registering with rpcbind after a failure in listener_set nfsd_nl_listener_set_doit() calls svc_xprt_create_from_sa() once for each requested listener and passes flags of 0, so every listener registers with rpcbind on its own. A rpcbind that accepts the connection and never replies therefore costs one timeout for each entry. With the cap of 1024 entries the request can hold nfsd_mutex for about 34 minutes, which is roughly 17 times the hung-task threshold. One failure is enough to know that the next call will not fare better. Read svc_rpcb_failure_count() before the create loop, and pass SVC_SOCK_ANONYMOUS for the rest of the request once the count moves.

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99791

    In the Linux kernel, the following vulnerability has been resolved: xfs: improve dirent bounds checking in scrub and repair LOLLM complains that we don't do enough bounds checking of the directory entries in directory blocks when we're looking for errors or trying to salvage entries. Let's improve that with more detailed checks.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99780

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: always reset completion when disconnecting When some tx or rx transfers were pending while closing the connection, the completion handler could catch one pending completion call. To ensure a normal start when mounting again, we have to reset the completion and flush any pending completions.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-99781

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: set client to Disconnected on usb9pfs_disable This patch is setting the client status to Disconnected, when the client is still in use. Otherwise a disconnected usb cable would run any use of the mount to faults.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-99782

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: also disable endpoints on p9_usbg_close The close function has to fully reverse the state change of 9p_create (mount) and the potential call of set_alt(1). This includes to ensure that the usage of the endpoints is not active any more.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-99773

    In the Linux kernel, the following vulnerability has been resolved: drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind In [1], sashiko reported the following issue: === snip === Looking at how these fences are managed, drm_crtc_create_fence() creates a dma_fence without taking a reference to the drm_device or drm_crtc. Because the sync_file framework exposes this fence to userspace, the fence can outlive the CRTC. The dma_fence contract requires that data accessed by dma_fence_ops (like get_driver_name) must remain valid for an RCU grace period after the fence is signaled. However, drm_crtc_cleanup() and the subsequent freeing of the device do not wait for an RCU grace period via synchronize_rcu(). If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device hot-unplug: CPU1 (Userspace) sync_file_get_name() ops = rcu_dereference(fence->ops); if (!dma_fence_test_signaled_flag()) // Preempted or delayed here CPU2 (Driver Teardown) Signals the fence (setting fence->ops = NULL) Destroys and frees the CRTC without waiting for an RCU grace period CPU1 (Resumes) ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name() crtc = fence_to_crtc(fence); // Casts to the freed CRTC return crtc->dev->driver->name; // Use-after-free ... Does the CRTC or DRM device need to be kept alive for the RCU grace period, or should the fence hold a proper reference to prevent the use-after-free when get_driver_name() and get_timeline_name() access the freed CRTC structure? === snap === I believe this to be a correct observation and this patch implements the suggestion of waiting for an RCU grace period before proceeding with destruction of the drm_crtc, so that get_driver_name() and get_timeline_name() can still work.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-99774

    In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: reorder operations within espintcp_init_sk When enabled on a socket, espintcp sets the socket callbacks to its own before it has finished setting up its context and published it as icsk_ulp_data. Any one of those callbacks that gets called before will dereference a NULL icsk_ulp_data. Fix this by reording the operations, and add memory barriers to ensure callers will have a struct espintcp_ctx available. Add a few WRITE_ONCE/READ_ONCE too while we're there.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-99775

    In the Linux kernel, the following vulnerability has been resolved: xfrm: interface: validate the IP header on xmit Packets injected into an xfrm interface (e.g. AF_PACKET on an xfrmi device) reach the xfrm output path without IP header validation, but xfrm4_transport_output() uses iph->ihl for __skb_pull() and memmove() and expects the header to be valid. vti_tunnel_xmit() already calls pskb_inet_may_pull() before handing packets to the xfrm output path. Do the same in xfrmi_xmit() and perform the header checks ip_rcv_core()/ip6_rcv_core() do on entry to the IP stack: reject wrong IP versions and malformed IPv4 header lengths.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-99776

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: clear stale client pointer on close p9_usbg_close() tears down the client transport, but usb9pfs keeps using usb9pfs->client from asynchronous TX and RX completion handlers. A late completion can therefore dereference a client that has already been freed during mount teardown. Clear usb9pfs->client under usb9pfs->lock when closing the transport, detach any pending TX request from in_req->context, and make the TX/RX completion handlers bail out once the transport has been detached. This keeps late completions from touching a freed or rebound p9_client.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-99777

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-99778

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix out_req buffer leak in disable_usb9pfs usb9pfs->out_req is allocated with alloc_ep_req(), which also allocates the request's data buffer (req->buf). disable_usb9pfs() frees it with plain usb_ep_free_request(), which only frees the usb_request structure itself and leaks req->buf on every close. Use free_ep_req() instead, matching the allocator, as documented by its own comment ("Requests allocated via alloc_ep_req() *must* be freed by free_ep_req()").

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-99768

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99770

    In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99771

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reload TDLS header pointer after skb_linearize() ieee80211_process_tdls_channel_switch() sets tf = skb->data before it calls skb_linearize(), and reads tf->action_code afterwards. ieee80211_rx_h_data() queues TDLS channel switch requests and responses to the interface after pulling only offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be non-linear when the interface work handles it. Drivers that build paged RX skbs do this for every frame that does not fit into the skb head, e.g. iwlwifi (mvm), which is also the only mac80211 driver that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data does not fit into the tailroom, skb_linearize() moves the data to a new head and frees the old one, and the action code is then read from freed memory. Depending on what that memory holds by then, the frame is handled as before or ends in the WARN_ON_ONCE() of the default case. The frame only has to be a data frame with the TDLS ethertype from an authorized peer, e.g. relayed by the AP from another station in the BSS; the read happens before the sender is checked to be a TDLS peer. Load tf after skb_linearize(), as the request and response handlers already do. Found by static analysis tool CodeQL.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99565

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99556

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize directory emptiness checks with readdir SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir() on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same filp without that lock. iterate_dir()'s inode read lock permits concurrent readers and does not serialize per-file iterator state. ext4 stores its dx readdir cursor and fname RB tree in file->private_data. Concurrent reset or refill can therefore free a fname node while the other worker still traverses it or retains its RB-tree link, resulting in use-after-free accesses. An authenticated SMB client with list and delete rights on a directory in a writable KSMBD share backed by ext4 can trigger this when the directory takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION on one live FileId. In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at 171df27077fb, the unmodified kernel reported a cross-worker use-after-free before a panic. The first report's access and free stacks show the two request paths directly (trimmed): BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550 Read of size 8 by task kworker/2:0/29 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ext4_htree_store_dirent+0x488/0x550 htree_dirblock_to_tree+0x535/0x990 ext4_htree_fill_tree+0x319/0xba0 ext4_readdir+0x175a/0x2f40 iterate_dir+0x1b6/0x630 smb2_query_dir+0x1003/0x1cc0 Freed by task 279: free_rb_tree_fname+0x67/0xc0 ext4_readdir+0x13a9/0x2f40 iterate_dir+0x1b6/0x630 ksmbd_vfs_empty_dir+0xa2/0x100 smb2_set_info+0x2ffa/0x45d0 Take fp->readdir_lock across the entire emptiness check. This places both iterators over that handle's filp in the same lock domain while preserving the disposition status handling. The exact code change completed a warning-free x86_64 KASAN bzImage build. Tracing three request pairs showed that the two iterate_dir() calls no longer overlapped and the expected statuses were preserved. A further 1,600 reproducer iterations completed with expected statuses and no KASAN report, Oops, or panic. The reproducer and complete guest configuration are available privately to maintainers on request.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-99557

    In the Linux kernel, the following vulnerability has been resolved: ceph: fail readdir when the MDS reply carries no dirfrag A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR request with a reply whose extra blob is empty. parse_reply_info() skips reply blobs whose length is zero, so parse_reply_info_readdir() never runs, r_reply_info.dir_dir stays NULL, and the reply still parses as successful. ceph_mdsc_do_request() returns 0 and ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check: /* extra */ ceph_decode_32_safe(&p, end, len, bad); if (len > 0) { ... err = parse_reply_info_extra(&p, p + len, req, features, s); ... } The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the mount root after an ms_mode=legacy mount, trimmed: BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:ceph_readdir+0xbff/0x3ea0 Call Trace: <TASK> ? __pfx_ceph_readdir+0x10/0x10 wrap_directory_iterator+0xa2/0xe0 iterate_dir+0x1da/0x5d0 __x64_sys_getdents64+0x13b/0x2a0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The unconditional frag read came in with 81c6aea5275ea ("ceph: handle frag mismatch between readdir request and reply"), so the bug is old. Treat a reply with no dirfrag as a protocol violation: warn once, drop the request and return -EIO, the same way ceph_readdir() already handles the two malformed-reply cases later in the function. Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the getdents64(2) above takes the machine down (oops=panic) on the first READDIR reply. With the patch it warns once and getdents64(2) returns -EIO, no oops, no hang. A conformant reply for an empty directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE — still lists "." and ".." and returns EOF on both kernels, so normal readdir behavior is unchanged. The oops is still present in v7.3-rc5 (72d3fcf802c45).

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99561

    In the Linux kernel, the following vulnerability has been resolved: fork: don't create io threads once PF_POSTCOREDUMP is set zap_process() skips every thread that already has PF_POSTCOREDUMP set. Such a thread is past synchronize_group_exit(), so a coredump can't catch it anymore. It isn't counted in core_state->threads_remaining and it isn't sent SIGKILL. do_exit() sets PF_POSTCOREDUMP in synchronize_group_exit() and calls io_uring_files_cancel() right after that. The cancellation runs task work and a create_worker_cb() that io-wq queued before the exit creates a new io-wq worker from there. If another thread started a coredump in the meantime that worker joins a thread-group which is already being dumped. zap_process() never saw it so it was never counted. But when it exits it sees signal->core_state in synchronize_group_exit() and decrements threads_remaining like any other thread. So the count reaches zero one thread early and the dumper leaves coredump_wait_inactive() while a thread it counted is still running. The task has no fatal signal pending because zap_process() deliberately didn't send it one, and it never went through get_signal() so it doesn't have PF_SIGNALED either. Refuse to create an io thread when the creator has PF_POSTCOREDUMP. That costs nothing. io_uring_files_cancel() raises IO_WQ_BIT_EXIT before it runs any task work, so a worker created from there only ever gets to exit again, and io_should_retry_thread() doesn't retry -EINTR. Clearing PF_POSTCOREDUMP for the new thread in copy_process() was the other option. It makes the worker a thread like any other, but it only helps while the dump hasn't started. A worker born after zap_process() has run is invisible to it whatever its flags say and still decrements threads_remaining on the way out. Refusing to create it covers both, and then no task is ever born with the flag, so there is nothing to clear. Moving io_uring_files_cancel() ahead of synchronize_group_exit() closes the same window. It runs the cancellation, and whatever that can block on, before the thread announces itself to the dumper. A thread that blocks there never reaches coredump_task_exit() at all, so the dumper ends up waiting for a thread that never parks. Refusing the creation leaves the cancellation where it is. But it's very ugly to run io_uring work even before we did all the generic exit work.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99548

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix early procfs exposure race Currently, init_cifs() calls cifs_proc_init() near the beginning of the function, before INIT_LIST_HEAD, leading to a momentarily uninitialized, but exposed, procfs. If a userspace process reads this empty procfs, iterating over a zeroed list_head leads to a NULL pointer dereference and a kernel oops/panic. For example, if a delay is added between cifs_proc_init() and INIT_LIST_HEAD, and a userspace process is polling /proc/fs/cifs/DebugData, the following oops occurs: BUG: kernel NULL pointer dereference, address: 0000000000000608 Oops: Oops: 0000 [#1] SMP PTI CPU: 0 UID: 0 PID: 3477 Comm: cat Not tainted 7.3.0-02212-g4df4d2a577db-dirty #6 PREEMPT(lazy) RIP: 0010:cifs_debug_data_proc_show+0x103/0xd80 [cifs] Call Trace: <TASK> ? seq_read_iter+0x86/0x400 ? seq_read_iter+0x86/0x400 seq_read_iter+0x183/0x400 proc_reg_read_iter+0x62/0x90 copy_splice_read+0x215/0x310 splice_file_to_pipe+0xec/0x1c0 do_splice+0x4b8/0x780 __se_sys_splice+0x18f/0x250 do_syscall_64+0x109/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by moving cifs_proc_init() down in init_cifs(), ensuring it runs only after all internal lists, locks, counters, and workqueues are fully ready, but before registering the filesystem. Update the error cleanup ladder and exit_cifs() to maintain proper LIFO order.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99549

    In the Linux kernel, the following vulnerability has been resolved: smb: client: do not pass a NULL buf to is_oplock_break() receive_encrypted_read() sets *num_mids = 1 and never writes the caller's bufs[]. Offload returns -1 with *num_mids = 0, so the demultiplex thread skips the frame. The inline decrypt path returns 0 even when smb2_find_mid() fails. cifs_demultiplex_thread() then treats mids[i] == NULL as an oplock break and calls is_oplock_break(bufs[i], server) with bufs[i] still NULL. smb2_is_valid_oplock_break() reads hdr.Command at offset 12 and oopses. A large encrypted READ whose MessageId does not match is enough to panic cifsd. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 100 Comm: cifsd RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs] cifs_demultiplex_thread Kernel panic - not syncing: Fatal exception Return -1 when inline decrypt finds no mid, and skip is_oplock_break() plus the unknown-frame dump when bufs[i] is NULL. receive_encrypted_standard() already assigns bufs[*num_mids].

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99550

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: pin owning modules for open debugfs files The OCFS2 debugfs file operation tables do not set owner. The full debugfs proxy obtains real_fops with fops_get() at open and keeps it until final release. Without an owner, this does not acquire a reference to the module containing the table and its callbacks. Removing the debugfs entries does not drain retained open files. An open connected_nodes file can therefore outlive ocfs2_nodemanager and make full_proxy_release() read real_fops->release from freed module memory. Heming also reproduced the issue with fs_state and asked for the other OCFS2 debugfs operation tables to be checked. Set owner to THIS_MODULE in all eleven explicit debugfs operation tables: five in ocfs2_nodemanager, four in ocfs2_dlm, and two in ocfs2. The existing debugfs get/put pair then holds the appropriate module until final release. Leave the open, read and release callbacks unchanged. The blockcheck table already sets owner through DEFINE_DEBUGFS_ATTRIBUTE(), so it needs no change. The original controlled test used an unloadable OCFS2 module and case-local probe filters without changing the candidate open, unload or release logic. Closing a retained connected_nodes file after normal unload produced: BUG: unable to handle page fault for address: fffffbfff804cfef Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0xbf/0x190 Call Trace: <TASK> __fput+0x39a/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Modules linked in: [last unloaded: ocfs2_nodemanager]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99551

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: drain quorum work before removing the cluster The configured cluster must remain available until an in-flight quorum decision has finished using its fencing method. o2quo_make_decision() drops qs_lock before calling o2quo_fence_self(), which marks heartbeat regions for unclean stop and then reads o2nm_single_cluster->cl_fence_method. Cluster removal clears the singleton without waiting for this independent system-workqueue item. When a failed-quorum decision overlaps removal of the heartbeat regions, nodes and cluster through configfs, the worker can be preempted after marking the regions and resume after the singleton has been cleared: Quorum worker Configfs removal select fence; drop qs_lock o2hb_stop_all_regions() remove regions; join heartbeat threads remove nodes; stop o2net clear singleton; release cluster read cl_fence_method The resumed read dereferences NULL instead of applying the configured fencing method. The heartbeat thread's dependency protects the local node only until the thread exits, and draining o2net does not wait for qs_work. Add o2quo_flush_work() to drain pending or running quorum decisions before clearing the singleton in o2nm_cluster_group_drop_item(). By this point the heartbeat regions and nodes have been removed, so their work publishers are stopped. The worker can finish while the cluster and its configured fencing method remain available. It does not acquire the configfs mutex held by the removal path. Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown and initialization failure, and have it call the same drain helper. Cluster removal uses only the explicitly named drain operation. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df] CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events o2quo_make_decision RIP: 0010:o2quo_fence_self+0x65/0x200 Register dump omitted. Call Trace: <TASK> o2quo_make_decision+0x345/0x3a0 ? __pfx_o2quo_make_decision+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99552

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99554

    In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: do not advance rx_skb->data on dropped frames For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive header by advancing pegasus->rx_skb->data in place. This is done before the pkt_len > PEGASUS_MTU check, and when that check drops the frame the good path resubmits the same skb with the advanced rx_skb->data as the transfer buffer, still PEGASUS_MTU bytes long. Every frame with an oversized length field therefore moves the receive buffer two more bytes towards the end of the skb data area. A device that keeps sending such frames makes the host controller write received data over skb_shared_info and past the end of the allocation, and the corrupted skb_shared_info is used when the skb is eventually freed. With an emulated device sending frames filled with 0x5a on a KASAN kernel: BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd] Write of size 1536 at addr ffff888105821202 by task swapper/1/0 ... Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67] RIP: 0010:skb_release_data+0x36f/0x800 Only skip the header with skb_reserve() once the frame is going to be passed up, so the receive buffer always starts at the beginning of the skb data area. Unlike the old pointer adjustment, skb_reserve() also moves skb->tail, so the two header bytes now count against the buffer size: lower the length limit for the 0x8513 accordingly, otherwise a pkt_len of PEGASUS_MTU - 1 or PEGASUS_MTU would trip skb_over_panic(). Found by code review with LLM assistance and reproduced with an emulated USB device (raw-gadget + dummy_hcd).

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99555

    In the Linux kernel, the following vulnerability has been resolved: media: usbtv: fix null-pointer dereference on disconnect A null-pointer dereference can occur in usb_make_path() when called from usbtv_querycap() (and other ioctl handlers) during device disconnection. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] RIP: 0010:usb_make_path include/linux/usb.h:985 [inline] RIP: 0010:usbtv_querycap+0x9c/0x100 drivers/media/usb/usbtv/usbtv-video.c:612 ... Call Trace: <TASK> v4l_querycap+0x236/0x470 drivers/media/v4l2-core/v4l2-ioctl.c:1106 __video_do_ioctl+0x8af/0xc70 drivers/media/v4l2-core/v4l2-ioctl.c:3133 video_usercopy+0x860/0x1430 drivers/media/v4l2-core/v4l2-ioctl.c:3475 v4l2_ioctl+0x18d/0x1e0 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 This happens due to a race condition between the USB device disconnect routine (usbtv_disconnect()) and V4L2 ioctls. When the device is disconnected, usbtv_disconnect() sets usbtv->udev = NULL without holding the usbtv->v4l2_lock mutex. Concurrently, an ioctl handler like usbtv_querycap() can be executing under the v4l2_lock and attempt to use usbtv->udev, leading to a crash. To fix this, move the usbtv->udev = NULL assignment into usbtv_video_free() and protect it with mutex_lock(&usbtv->v4l2_lock). This ensures that no non-queue ioctl handler can run concurrently with the pointer being nullified. If an ioctl is already running, the mutex will block the disconnect path until the ioctl finishes. If an ioctl is blocked waiting for the lock, it will acquire it after the disconnect routine releases it, but will then check video_is_registered() (which was cleared by vb2_video_unregister_device()) and safely return -ENODEV. Acquiring v4l2_lock after vb2_video_unregister_device() avoids reintroducing a historical deadlock issue, and usbtv_audio_free() remains safe as it is called before usbtv_video_free().

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99543

    In the Linux kernel, the following vulnerability has been resolved: backlight: qcom-wled: Fix NULL pointer dereference in wled_remove() wled_probe() doesn't set the driver data for the platform device. As a result, platform_get_drvdata() in wled_remove() will return NULL, and the first dereference of it crashes on unbind. Set the platform device driver data in wled_probe().

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99544

    In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Bounds check the shared ring buffer indices In a CoCo VM the host is untrusted. Since the VMBus ring buffer read and write indices live in shared memory, the guest has to treat both as potentially malicious. hv_ringbuffer_write() copies into the ring at write_index with no bounds checking, so the host can make the guest write packet data at any offset up to 4 GiB past the start of the ring buffer. read_index matters too: the available space derived from both indices is the only bound on how much is copied, and an out-of-range index can make it far larger than the ring. The fix is to validate both indices before use and to use the validated snapshot instead of re-accessing. For invalid indices, hv_ringbuffer_write() logs and returns -EIO. One re-read of write_index is left unchecked in this patch: hv_get_ring_bufferindices() fetches it again for the prev_indices trailer. The value is only returned to the host and is not used as an offset or length for indexing. Since this is not a security issue, it is addressed later in the series. Open-coding the bytes available arithmetic keeps the fix free of prerequisites; a later patch refactors it into a helper function.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99545

    In the Linux kernel, the following vulnerability has been resolved: driver core: take parent lock on deferred probe USB interfaces should be probed with the parent USB device lock held, but this is not honoured when probe is deferred. Add a new bus_probe_device_deferred() helper to handle deferred probe where the parent device lock is not held.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99546

    In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: avoid stale mask references after delete Flower releases a mask reference when a filter is removed from the classifier. The filter object can remain alive while dump, walk, or hardware reoffload paths hold a reference to it. Those paths can then dereference f->mask after the mask has already been released. Keep the mask reference until the filter reference count reaches zero. Release the mask synchronously from the final __fl_put() while the caller still holds the tcf_proto reference, and leave the existing RCU work to free the mask. This keeps the mask available to every reader that still holds the filter. The filter is still removed from the classifier indexes immediately. Therefore, a deleted filter can temporarily retain an otherwise empty mask; fl_delete() uses the handle IDR, rather than the mask list, to determine whether the classifier has become empty. Failed mask assignment can leave fnew->mask as an error or borrowed pointer without an owned mask reference. Clear it before the common failure path so the final put cannot release an unowned reference. This fix does not add fields, snapshots, or per-filter memory.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99547

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not RPM complete unrelated subtrees on unplug When a Thunderbolt device is unplugged, that switch and every switch subsequent to it on the bus device list is `complete()`d, not just its child devices. In the case of multiple domains, it may cause, eg, an attempt to `complete()` the uninitialized domain 1 root switch RPM completion on unplug of a switch from domain 0 (though ordering is not guaranteed numerically sorted). I initially noticed this issue on a Dell XPS9720 when the system would seem to sporadically not wake after unplugging a Thunderbolt dock. I tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if that resolved the issue, but the issue persisted. Eventually I found that I could consistently generate a kernel Oops reporting a page fault at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I ultimately ended up changing. To confirm this issue, I did an eBPF trace of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while unplugging in a variety of situations and found that an unplug from domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM completion is not initialized and thus is holding a null wait-list pointer, triggering the page fault. Here are the key sections of that eBPF trace. Note that HEAD denotes the completion's own wait-list HEAD: ``` RESCAN_ENTER domain=0 COMPLETE rescan_domain=0 target=0-1 target_domain=0 route=0x1 parent=0-0 unplugged=1 COMPLETION done=0 head=HEAD next=HEAD prev=HEAD BUS_WALK domain=0 start=0-1 callback=complete_rpm CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1 COMPLETE rescan_domain=0 target=1-0 target_domain=1 route=0x0 parent=domain1 unplugged=0 COMPLETION done=0 head=HEAD next=0 prev=0 complete+5 complete_rpm+43 bus_for_each_dev+133 icm_free_unplugged_children+250 icm_rescan_work+42 ``` This patch gates the `complete()` on an additional condition - that the Thunderbolt domain matches the domain of the device that was unplugged. I only have a single system with multiple Thunderbolt domains - the Dell XPS9720. I am consistently able to reproduce the Oops on that system. Since running with this patch, I have not seen the Oops reoccur. I have also tested it on a Thinkpad X1-Gen12, and that system boots and runs well with it, but it only has a single Thunderbolt domain, so it does not exercise the multi-domain failure case.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99422

    In the Linux kernel, the following vulnerability has been resolved: ovl: use the pinned upper dir in ovl_fix_origin() Renames made directly on the upper filesystem during a lookup crash the kernel. A dentry that is passed to vfs_setxattr() must be pinned. ovl_fix_origin() passes upper->d_parent to ovl_set_impure() without a reference, and the lookup holds no lock of the upper directory. A rename on the upper filesystem changes d_parent, and only the child pins the new parent, so a second rename and an rmdir free it. With delays in ovl_fix_origin() and ovl_set_impure(), renaming the upper directory twice and removing the intermediate parent during the lookup of a merge directory without an origin xattr gave a KASAN use-after-free in vfs_setxattr(). Fix this by passing the upper dentry that the overlay parent holds. [amir: add helper ovl_set_impure_dir()]

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99414

    In the Linux kernel, the following vulnerability has been resolved: ovl: skip copy up of empty security.capability ovl_copy_xattr() gives up if it can't read an attribute that listxattr() has named. An empty security.capability, which anybody has been able to store on any file for a long time, is such a case: it is listed, and getxattr() has nothing to return for it. A file in a lower layer that carries one can't be copied up: it can't be written to, renamed or have its mode changed. There is nothing to copy if there are no data. Go on with the next one. [amir: treat -EINVAL as no capability too, and do the same in ovl_copy_up_meta_inode_data()]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99415

    In the Linux kernel, the following vulnerability has been resolved: ovl: set the revalidate flags after d_instantiate() stat() of a file on an overlayfs mount triggers a kernel warning and fails with ECHILD if another task is creating that file at the same time. This happens on an overlay with a FUSE upper layer, which is the layer where overlayfs creates new files. Write access to a directory on such an overlay is all a user needs to run the two tasks. The revalidate flags are DCACHE_OP_REVALIDATE and DCACHE_OP_WEAK_REVALIDATE. They tell path walk to call ->d_revalidate() or ->d_weak_revalidate() on a dentry, so that the filesystem can check that the cached dentry is still valid. An overlay dentry only has one of these flags if a dentry in one of its layers has it. FUSE dentries have the first one. When a flag is set on an overlay dentry, path walk calls ovl_dentry_revalidate_common(). That function only expects a dentry without an inode in RCU walk, while the dentry is being destroyed. For such a dentry outside of RCU walk, it hits a WARN_ON() and returns -ECHILD. So a negative overlay dentry must never have the flags set. ovl_instantiate() breaks this rule. When a task creates a file, the overlay dentry for the new name is hashed but still negative. ovl_instantiate() then works in this order: - It copies the flags from the new upper dentry to the overlay dentry. - It calls ovl_get_inode(), which can sleep in a getxattr request to the FUSE server. - Only then does it call d_instantiate(). A second task that looks up the name between the first step and the last finds a negative dentry with the flags set and revalidates it. Reproduced with a FUSE server that delays its getxattr reply: stat() of a name that was being created hit the WARN_ON() and failed with ECHILD. Fix this by setting the flags after d_instantiate().

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99416

    In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.

    Disclosure OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99420

    In the Linux kernel, the following vulnerability has been resolved: ovl: check that the parents of volatile/dirty are dirs An unprivileged user crashes the kernel by mounting overlayfs with the volatile option. A dentry that serves as the parent of a lookup must be a directory. ovl_create_volatile_dirty() walks work/incompat/volatile/dirty by name, and ovl_lookup_or_create() returns an existing entry whatever its type. A file or a symlink that another task creates during the mount becomes the parent of the next lookup, which calls a NULL ->lookup. An unprivileged user mounted overlayfs with "volatile" in a user namespace while a second process created a symlink named work/incompat, and the mount task oopsed on a NULL ->lookup call. Fix this by returning -ENOTDIR from ovl_lookup_or_create() when the caller asked for a directory and the existing entry is a non-dir.

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99421

    In the Linux kernel, the following vulnerability has been resolved: ovl: always encode the origin fh when index is enabled On an overlay with index=on,nfs_export=on, copy up of a directory crashes the kernel once an LSM has started to deny CAP_DAC_READ_SEARCH to the mounter, the task that mounted the overlay. The mount and the LSM policy change require root. After that, any user who can write to a directory that exists only in a lower layer triggers the oops by doing so. Before a file or directory that exists only in a lower layer is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. On copy up, ovl_get_origin_fh() encodes the file handle of the lower inode, called the origin. It returns NULL if ovl_can_decode_fh() says that the lower filesystem cannot decode handles. Whether the callers can handle NULL depends on the index option: - Without an index, NULL is fine: the callers store an empty origin xattr. - With index enabled, overlayfs keeps entries for copied up inodes in an internal index directory. The name of an index entry is derived from the handle, so ovl_get_origin_fh() must return a handle or an error. The mount only enables the index if ovl_can_decode_fh() succeeds for all layers, but the result can change later. The function checks the export operations of the filesystem and capable(CAP_DAC_READ_SEARCH). Copy up runs with the mounter's credentials, and an LSM can start to deny the capability to those credentials after the mount. ovl_get_origin_fh() then returns NULL with index enabled. This goes wrong in two callers: - With nfs_export=on, copy up of a directory creates an index entry for the directory. ovl_create_index() passes the NULL handle to ovl_get_index_name_fh(), which dereferences it. - If the result changes while mount(2) is still running, ovl_get_indexdir() passes a NULL from ovl_get_origin_fh() to ovl_verify_set_fh() in the same way. Before the commit in the Fixes tag, these two callers encoded the handle themselves, without consulting ovl_can_decode_fh(). Reproduced with a BPF LSM program that started to deny the capability after the mount. An unprivileged touch in a directory that had not been copied up yet oopsed in ovl_get_index_name_fh(). With this patch the touch succeeds and the directory gets its index entry. Fix this by calling ovl_can_decode_fh() in ovl_get_origin_fh() only when index is disabled.

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99407

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't repair fs summary counters with garbage LOLLM noticed that if we scan the filesystem and come up with totally garbage numbers for the summary counters, we don't actually mark the scan incomplete. Because we don't do this, repair can install the garbage values into the filesystem, making things worse. Don't do that.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99408

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't proceed with xattr repair if the live update fails LOLLM observes that we ought to make one last check for failed live updates before replacing the xattr structure. Let's be cautious here.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99409

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't fix the directory tree if live update fails LOLLM complains that we don't double-check dl->aborted one last time to before committing repairs to the filesystem. This is important because the live update handler could have set ->aborted if it encountered a runtime error.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99410

    In the Linux kernel, the following vulnerability has been resolved: xfs: always reset incore attr fork buffer when resetting fork LOLLM noticed that the local format attr fork verifier depends on if_bytes being set correctly. However, the fork reset function doesn't reset that correctly, which can cause post-repair verifier failures. Fix that.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99413

    In the Linux kernel, the following vulnerability has been resolved: xfs: fix buffer overruns in xfs_ioc_attr_list When we converted the al_offset array in struct xfs_attrlist into a VLA, the size of the object shrank by 4 bytes. Unfortunately, the buffer size validation in the attrlist ioctl wasn't updated to notice this, so the al_offset[0] assignment blindly writes off the end of the buffer. LOLLM noticed the omitted check and complained.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds Fix listed
  42. CVE-2026-132751

    yt through 4.4.4 contains a code injection vulnerability that allows attackers to execute Python code by supplying a crafted con_args attribute in a ytdata HDF5 file. SavedDataset._parse_parameter_file() passes con_args to eval() unrestricted, so loading a malicious .h5 file with yt.load() runs attacker code as the user.

    Injection yt-project Yt

    8.5 HIGH 0.2% exploit odds Fix listed
  43. CVE-2026-128661

    PHPGurukul Employee Leaves Management System v2.1 contains an insufficient verification vulnerability in the password recovery functionality in forgot-password.php. The application allows an unauthenticated user to access the password-change workflow by providing a valid employee ID and corresponding email address without requiring an additional out-of-band verification mechanism.

    Other Web app n/a

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-59159

    Linux Mint Update Manager manages software updates on Linux Mint systems. From 5.4.8 until 5.5.4.3, 5.5.9.1, 5.8.8.1, 5.9.8.1, 6.0.9.1, and 6.1.5.1, mint-refresh-cache passes a user-controlled --parent-window-id value directly to the privileged Synaptic process without validating it as an integer. A local user permitted to execute mint-refresh-cache through sudo can inject additional Synaptic command-line options and achieve arbitrary code execution as root. This issue is fixed in versions 5.5.4.3, 5.5.9.1, 5.8.8.1, 5.9.8.1, 6.0.9.1, and 6.1.5.1.

    Injection Linuxmint

    8.5 HIGH 0.2% exploit odds Fix listed
  45. CVE-2026-116447

    Dell PowerStore SDNAS contains a local privilege-escalation vulnerability that could allow a low-privileged attacker to execute code as root on the NAS node.

    Auth & access Dell PowerStore 500T

    8.8 HIGH 0.2% exploit odds Fix listed
  46. CVE-2026-127356

    Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Financial Close Management. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Hyperion Financial Close Management accessible data as well as unauthorized read access to a subset of Oracle Hyperion Financial Close Management accessible data. CVSS 3.1 Base Score 4.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:N).

    Auth & access Oracle Corporation Oracle Hyperion Financial Close Management

    4.2 MEDIUM 0.2% exploit odds Fix listed
  47. CVE-2026-93298

    A maliciously crafted DXF file containing crafted VBA project data, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to read sensitive data from process memory.

    Memory safety

    5.5 MEDIUM 0.2% exploit odds No fix listed
  48. CVE-2026-93297

    A maliciously crafted DWG or DXF file containing a crafted field format string, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to read sensitive data from process memory.

    Memory safety

    5.5 MEDIUM 0.2% exploit odds No fix listed
  49. CVE-2026-126549

    Insertion of Sensitive Information into Log File vulnerability in Broadcom AutoSys Workload Automation (Workload Control Center (WCC) modules) on Windows, Linux allows Collect Data from Common Resource Locations.This issue affects AutoSys Workload Automation: from 12.1.00 through 24.2.00.

    Disclosure OS & kernel

    5.1 MEDIUM 0.2% exploit odds No fix listed
  50. CVE-2026-97999

    LibreOffice Base documents can hold an embedded HSQLDB database. When the experimental features option is enabled, LibreOffice offers to migrate such a database to the embedded Firebird engine when the document is opened. A heap buffer overflow existed when binary values were copied during the migration, because a value could be longer than the space set aside for its column. In fixed versions that space is enlarged whenever a value is longer than its column.

    Memory safety

    5.4 MEDIUM 0.2% exploit odds No fix listed

CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.