CVE-20XX-?
agent?

CVEs of 2026.

Every CVE published in 2026 that we hold, ranked by exploit odds.

2,501 CVEs · updated 2026-11-21 23:37 UTC

Reset all
  1. CVE-2026-98995

    In the Linux kernel, the following vulnerability has been resolved: namespace: reset the old parent's ->overmount in mnt_change_mountpoint() __umount_mnt() resets ->overmount of the parent when it unmounts the mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the mount to its new parent and leaves the old one pointing at it. For a mount that is moved beneath in attach_recursive_mnt() that doesn't matter. The new mount has already reset ->overmount of the old parent by the time the old top mount is moved onto it. It matters for reparent() though. propagate_umount() moves a surviving overmount onto the first ancestor that isn't going to be unmounted. The mount it was taken from is unmounted immediately afterwards. If a file descriptor keeps that unmounted mount alive ->overmount points at the moved mount. That's a dangling pointer and UAF as the moved mount is unmounted and freed. do_lock_mount() follows ->overmount from the target path under mount_lock. With a file descriptor on such a mount as the target of a mount beneath topmost_overmount() walks into the freed mount and do_lock_mount() takes references on whatever it finds there. So reset ->overmount of the old parent in mnt_change_mountpoint() the same way __umount_mnt() does. A mount's ->overmount is then always a mount that is attached to it.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  2. CVE-2026-98914

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: cap ATOM command table nesting depth Cap nesting at 32 levels with execute_depth and return -ELOOP when exceeded.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-28248

    Improper enforcement of behavioral workflow in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to potentially launch a guest whose attestation report contains an ID key digest for an ID block that doesn't match the guest's measurement resulting in loss of integrity.

    Other OS & kernel

    5.9 MEDIUM 0.2% exploit odds No fix listed
  4. CVE-2025-54508

    Improper validation of Reverse Map Table (RMP) entries in the Secure Encrypted Virtualization (SEV) firmware could allow a privileged attacker to trigger concurrent modifications to RMP entries without proper synchronization potentially resulting in loss of data integrity.

    Other OS & kernel

    4.0 MEDIUM 0.2% exploit odds No fix listed
  5. CVE-2025-62620

    Improper validation of unsafe equivalence in input could allow an attacker with high privileges to reclaim the ring buffer queue status page, potentially resulting in loss of guest memory integrity.

    Memory safety OS & kernel

    5.9 MEDIUM 0.2% exploit odds No fix listed
  6. CVE-2026-99215

    In the Linux kernel, the following vulnerability has been resolved: power: supply: core: prevent unregistering a power supply while a callback runs Once a power supply is registered, its callbacks can immediately start firing from other contexts, such as external_power_changed() triggered by the TCPM stack. If a power supply is unregistered while the callback is still running, the driver data can already be freed when the callback tries to access it, leading to a use-after-free. This happens e.g. when the hardware bus carrying the power supply device malfunctions (e.g. I2C is hogged down by another malfunctioning device) immediately after the power supply is registered, and thus the core is still processing the callbacks which were queued up when the driver starts the removal, leading in some cases to a kernel crash, e.g.: [ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005 [ 11.646751] Mem abort info: [ 11.647006] ESR = 0x0000000096000004 [ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits [ 11.647806] SET = 0, FnV = 0 [ 11.648077] EA = 0, S1PTW = 0 [ 11.648356] FSC = 0x04: level 0 translation fault [ 11.648785] Data abort info: [ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0 [ 11.650390] [0000000000000005] user address but active_mm is swapper [ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP [ 11.651460] Modules linked in: [ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT [ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT) [ 11.653024] Workqueue: events power_supply_changed_work [ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100 [ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8 [ 11.655098] sp : ffff80008192bb30 [ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000 [ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28 [ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62 [ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000 [ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000 [ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590 [ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0 [ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000 [ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000 [ 11.661878] Call trace: [ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P) [ 11.662596] __power_supply_am_i_supplied+0x40/0xb8 [ 11.663040] psy_for_each_psy_cb+0x20/0x40 [ 11.663416] class_for_each_device+0x110/0x150 [ 11.663825] power_supply_am_i_supplied+0x68/0x100 [ 11.664262] bq257xx_external_power_changed+0x58/0x140 [ 11.664733] __power_supply_changed_work+0x60/0x80 [ 11.665170] psy_for_each_psy_cb+0x20/0x40 [ 11.665545] class_for_each_device+0x110/0x150 [ 11.665953] power_supply_changed_work+0x98/0x1b8 [ 11.666382] process_one_work+0x164/0x4c0 [ 11.666758] worker_thread+0x19c/0x320 [ 11.667104] kthread+0x138/0x150 [ 11.667408] ret_from_fork+0x10/0x20 [ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34) [ 11.668294] ---[ end trace 0000000000000000 ]--- Add a read-write semaphore between external_power_changed() and power_supply_unregister() to prevent the latter from returning (and thus the driver from freeing its data) while the callback is still running.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-99123

    In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets are generated internally with VMADDR_CID_LOCAL as their source, including connections using CID aliases. Use the helper after lock_sock() in the virtio receive path.

    Other OS & kernel

    7.1 HIGH 0.2% exploit odds No fix listed
  8. CVE-2026-99042

    In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code.

    Other OS & kernel

    8.4 HIGH 0.2% exploit odds No fix listed
  9. CVE-2026-99792

    In the Linux kernel, the following vulnerability has been resolved: smb/server: prevent file publication after tree disconnect TREE_DISCONNECT closes the tree's published file handles before marking and removing the tree connection. A concurrent CREATE that already holds a tree reference can therefore publish its file after the close pass. When CREATE drops its reference, the tree can be freed while the published file still points to it. Mark and remove the tree connection before closing its files, and serialize both new-open and durable-reconnect volatile ID publication with that state transition. An opener is then either published in time for the close pass or rejected after disconnect with STATUS_NETWORK_NAME_DELETED. Keep a tree reference while a file carries its tree pointer. This protects asynchronous users that can defer the file's final destruction past tree disconnect. The close pass can race the successful FP_NEW to FP_INITED transition. Take the opening request's file reference atomically with that transition. This keeps the file alive until request completion even if teardown removes the ID immediately. BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126) Read of size 4 at addr ff11000101540f80 by task poc/153 Call Trace: proc_show_files (fs/smb/server/vfs_cache.c:126) seq_read_iter (fs/seq_file.c:231) proc_reg_read_iter (fs/proc/inode.c:299) vfs_read (fs/read_write.c:574) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Allocated by: ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35) smb2_tree_connect (fs/smb/server/smb2pdu.c:2819) handle_ksmbd_work (fs/smb/server/server.c:368) Freed by: kfree (mm/slub.c:6801) handle_ksmbd_work (fs/smb/server/server.c:332)

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-44685

    Authentication bypass by spoofing in the MigTD rebinding protocol for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable local code execution. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (high) impacts.

    Auth & access OS & kernel

    9.3 CRITICAL 0.2% exploit odds No fix listed
  11. CVE-2026-99235

    In the Linux kernel, the following vulnerability has been resolved: tracing: Save the event file instead of the compatible histogram create_field_var_hist() creates a histogram on the matched event to supply a field variable, and records it on the target so it can be torn down later: hist_data = find_compatible_hist(target_hist_data, file); ... /* Save the compatible histogram information */ var_hist->hist_data = hist_data; hist_data is not the histogram it creates. It is one that was already there, whose keys the new one copies. The saved pointer has a single user, unregister_field_var_hists(), which runs when the target is removed: file = hist_data->field_var_hists[i]->hist_data->event_file; find_compatible_hist() matches on keys alone, so it can pick one with no variables of its own. check_var_refs() then returns false and the user can remove it while the target still points at it: BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320 Read of size 8 at addr ffff8880093b90e0 by task init/1 Freed by task 1: kfree+0x154/0x420 event_hist_trigger_free+0x1d5/0x320 event_hist_trigger_parse+0x35f3/0x69e0 trigger_process_regex+0x1a6/0x250 Save the event file instead. It is all the dereference ever wanted, and it does not go away when the user removes a trigger.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  12. CVE-2026-99173

    In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: <TASK> tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __kmalloc_cache_noprof+0x249/0x560 eventfs_create_dir+0x7a/0x590 event_create_dir+0x2fb/0xcf0 trace_add_event_call+0xbf/0x150 [...] Freed by task 11: kfree+0x1db/0x5b0 srcu_invoke_callbacks+0x3a3/0x620 process_one_work+0x937/0x1810 worker_thread+0x4f1/0xd60 Before commit 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") release_ei() used call_rcu(), which covered the walker, while eventfs_iterate() needs the SRCU grace period. Wait for both and chain call_rcu() from the SRCU callback.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  13. CVE-2026-99117

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: don't truncate the port group walk on teardown __br_multicast_disable_port_ctx() and br_multicast_del_port() walk port->mglist with hlist_for_each_entry_safe(). However, br_multicast_find_del_pg() can also delete other entries from the same list through br_multicast_fwd_src_remove() or __fwd_del_star_excl(). If such an entry is the iterator's saved next node, hlist_del_init() clears its ->next and terminates the walk early. The reproducer triggers this in both teardown walks, leaving port groups in the bridge mdb with a dangling ->key.port after del_nbp() frees the port: BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320 __mdb_fill_info+0x1191/0x1320 br_mdb_dump+0x594/0xe40 rtnl_mdb_dump+0x1cf/0x5d0 Use hlist_del_init_rcu() to unlink the group while preserving ->next. br_multicast_del_pg() and the teardown walks run under br->multicast_lock. The GC worker must acquire the same lock before detaching the group for destruction, so the node remains alive while the walk uses the preserved pointer. Preserving ->next means a walk can now reach a group that an earlier iteration already deleted as a side effect. That group is off mp->ports, so br_multicast_find_del_pg() would fall through its port scan and hit the trailing WARN_ON(1). Skip such groups at the top of that helper: a port group is put on port->mglist when it is created and only unlinked when it is deleted, so hlist_unhashed() identifies exactly this case.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  14. CVE-2026-99054

    In the Linux kernel, the following vulnerability has been resolved: tipc: destroy topsrv workqueues before closing connections tipc_topsrv_stop() closed subscriber connections while the topology server's send and receive workqueues were still running. Socket callbacks and subscription events could then queue more work, and in-flight send/recv work could drop the last connection reference during the conn_idr walk. That race produced several teardown failures: refcount_t addition on 0 from conn_get() on a connection whose release was blocked on idr_lock, a subsequent use-after-free in tipc_conn_close(), queue_work() on an already destroyed workqueue from the listener data-ready callback, and an RCU stall in tipc_topsrv_exit_net() while the walk spun under idr_lock. Clear srv->listener under idr_lock so it acts as a shutdown flag, skip queue_work() once it is NULL, destroy the workqueues to flush in-flight work, and only then close the remaining connections. Refuse tipc_conn_lookup() after that flag is cleared, and drop idr_lock when the teardown walk finds no connection, so an in-flight subscription event cannot pin idr_in_use while the walk holds the lock. v3 supersedes the narrower in-thread diff Tung Quang Nguyen posted on 2026-09-23. It keeps his teardown order and adds the lookup refusal and the empty-idr unlock.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  15. CVE-2026-99032

    In the Linux kernel, the following vulnerability has been resolved: net/smc: protect clcsock lifetime in smc_getname smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  16. CVE-2026-99013

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Reject concurrent BIS listener setup iso_sock_listen() drops the socket lock before calling iso_listen_bis() to preserve the hdev->lock ordering. Two concurrent listen() calls on the same broadcast socket can therefore both observe BT_BOUND. Caller A can attach connA and release the locks, then caller B can acquire them and attach connB before A publishes BT_LISTEN. __iso_chan_add() checks whether connB already has a socket, but not whether the socket already has a connection. The second attachment overwrites iso_pi(sk)->conn, leaking the connA reference and leaving connA->sk intact. Socket teardown follows connB, so later events on connA can cause a stale socket access. Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking both the HCI device and socket locks in iso_listen_bis(). The connection check also covers the interval between attachment and publication of BT_LISTEN. Reject a competing setup with -EBADFD through the existing unlock path before allocating another connection. A recorded KASAN report from an instrumented kernel shows: BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0 Call Trace: iso_sock_hold+0x119/0x1f0 iso_conn_del+0xe4/0x270 hci_disconn_complete_evt+0x351/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 Allocated by task 93: sk_prot_alloc+0x113/0x220 sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 93: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 sock_close+0x10/0x20

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  17. CVE-2026-99014

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix command skb lifetime during scan setup During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the address used for the PA_LINK lookup from hci_sent_cmd_data(). The returned pointer borrows storage from sent_cmd or req_skb, without holding a reference to either skb. The scan worker runs on req_workqueue while hci_cmd_work() runs on the separate device workqueue. After the scan worker loads sent_cmd, the command worker can free and replace it before hci_sent_cmd_data() dereferences the skb. The command payload can also be freed between returning from the helper and comparing the address. The connection lookup's RCU critical section does not protect the command skb. KASAN reported: BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_sent_cmd_data+0x27c/0x2f0 hci_le_set_scan_param_sync+0x43a/0x850 hci_passive_scan_sync+0xb09/0x1460 hci_update_passive_scan_sync+0x47c/0x6e0 hci_le_pa_create_sync+0x200/0xa70 hci_cmd_sync_work+0x13c/0x290 Allocated by task 95: skb_clone+0x13f/0x340 hci_cmd_work+0x2a9/0x7e0 Freed by task 95: kmem_cache_free+0xba/0x3a0 hci_cmd_work+0x29c/0x7e0 Use hdev->lock to serialize the address snapshot with sent_cmd replacement. Protect req_skb replacement and completion cleanup with the same lock because the helper falls back to that skb. Copy the address before releasing the lock and use the copy for the existing RCU-protected connection lookup. Release the mutex before sending or waiting for commands, preserving the lookup and completion ordering.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  18. CVE-2026-99012

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  19. CVE-2026-99320

    In the Linux kernel, the following vulnerability has been resolved: ipv6: raw: fix use-after-free in rawv6_send_hdrinc() rawv6_send_hdrinc() caches the route before handing the skb to l3mdev_ip6_out(). The VRF output path may replace skb->dst and release the original route, leaving the cached pointer stale. The function later dereferences that pointer for statistics accounting and as the output device passed to NF_HOOK(). Its RCU read-side critical section starts after l3mdev_ip6_out(), so it cannot prevent the old route from being reclaimed in between. Reload the route from the current skb destination after l3mdev_ip6_out() returns. KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and the related RCU callback queued from vrf_l3_out().

    Memory safety OS & kernel Linux

    7.0 HIGH 0.2% exploit odds No fix listed
  20. CVE-2026-57893

    Incomplete internal state distinction in the MigTD's SPDM responder for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable data corruption. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Other OS & kernel

    6.8 MEDIUM 0.2% exploit odds No fix listed
  21. CVE-2026-60059

    Use of uninitialized resource in the MigTD memory for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow an information disclosure. Network adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety OS & kernel

    4.8 MEDIUM 0.2% exploit odds No fix listed
  22. CVE-2026-43603

    A NULL pointer dereference in the Linux GPU driver could potentially lead to a kernel crash and result in denial of service.

    Memory safety OS & kernel

    6.9 MEDIUM 0.2% exploit odds No fix listed
  23. CVE-2026-99788

    In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Validate FFH register fields before hardware access The x86 CPPC FFH accessors construct masks and shift values using the firmware's Bit Width and Bit Offset without checking that the field fits in an MSR. A zero-width field or a field extending beyond bit 63 can therefore cause an invalid shift. The safe MSR accessors only handle an access fault, not invalid field arithmetic after a successful read. Also, the 64-bit GAS address is implicitly narrowed to the 32-bit MSR number. A descriptor with nonzero upper address bits can access a different MSR from the one described by firmware. The arm64 AMU counter readers have the same unchecked field arithmetic. Validate the field bounds before reading a counter, including both descriptors in the paired counter path. Dispatch FFH accesses before decoding the GAS Access Size in the common read and write paths. Otherwise, a large access_width can trigger an invalid shift in GET_BIT_WIDTH() before the architecture validates its register. That field has architecture-specific FFH semantics and is not needed by the generic memory/port accessor on this path. Validate x86 MSR addresses and share the field-bounds checks between related accessors within each architecture.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99790

    In the Linux kernel, the following vulnerability has been resolved: NFSD: stop registering with rpcbind after a failure in listener_set nfsd_nl_listener_set_doit() calls svc_xprt_create_from_sa() once for each requested listener and passes flags of 0, so every listener registers with rpcbind on its own. A rpcbind that accepts the connection and never replies therefore costs one timeout for each entry. With the cap of 1024 entries the request can hold nfsd_mutex for about 34 minutes, which is roughly 17 times the hung-task threshold. One failure is enough to know that the next call will not fare better. Read svc_rpcb_failure_count() before the create loop, and pass SVC_SOCK_ANONYMOUS for the rest of the request once the count moves.

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99791

    In the Linux kernel, the following vulnerability has been resolved: xfs: improve dirent bounds checking in scrub and repair LOLLM complains that we don't do enough bounds checking of the directory entries in directory blocks when we're looking for errors or trying to salvage entries. Let's improve that with more detailed checks.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99780

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: always reset completion when disconnecting When some tx or rx transfers were pending while closing the connection, the completion handler could catch one pending completion call. To ensure a normal start when mounting again, we have to reset the completion and flush any pending completions.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99781

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: set client to Disconnected on usb9pfs_disable This patch is setting the client status to Disconnected, when the client is still in use. Otherwise a disconnected usb cable would run any use of the mount to faults.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99782

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: also disable endpoints on p9_usbg_close The close function has to fully reverse the state change of 9p_create (mount) and the potential call of set_alt(1). This includes to ensure that the usage of the endpoints is not active any more.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99773

    In the Linux kernel, the following vulnerability has been resolved: drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind In [1], sashiko reported the following issue: === snip === Looking at how these fences are managed, drm_crtc_create_fence() creates a dma_fence without taking a reference to the drm_device or drm_crtc. Because the sync_file framework exposes this fence to userspace, the fence can outlive the CRTC. The dma_fence contract requires that data accessed by dma_fence_ops (like get_driver_name) must remain valid for an RCU grace period after the fence is signaled. However, drm_crtc_cleanup() and the subsequent freeing of the device do not wait for an RCU grace period via synchronize_rcu(). If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device hot-unplug: CPU1 (Userspace) sync_file_get_name() ops = rcu_dereference(fence->ops); if (!dma_fence_test_signaled_flag()) // Preempted or delayed here CPU2 (Driver Teardown) Signals the fence (setting fence->ops = NULL) Destroys and frees the CRTC without waiting for an RCU grace period CPU1 (Resumes) ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name() crtc = fence_to_crtc(fence); // Casts to the freed CRTC return crtc->dev->driver->name; // Use-after-free ... Does the CRTC or DRM device need to be kept alive for the RCU grace period, or should the fence hold a proper reference to prevent the use-after-free when get_driver_name() and get_timeline_name() access the freed CRTC structure? === snap === I believe this to be a correct observation and this patch implements the suggestion of waiting for an RCU grace period before proceeding with destruction of the drm_crtc, so that get_driver_name() and get_timeline_name() can still work.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99774

    In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: reorder operations within espintcp_init_sk When enabled on a socket, espintcp sets the socket callbacks to its own before it has finished setting up its context and published it as icsk_ulp_data. Any one of those callbacks that gets called before will dereference a NULL icsk_ulp_data. Fix this by reording the operations, and add memory barriers to ensure callers will have a struct espintcp_ctx available. Add a few WRITE_ONCE/READ_ONCE too while we're there.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99775

    In the Linux kernel, the following vulnerability has been resolved: xfrm: interface: validate the IP header on xmit Packets injected into an xfrm interface (e.g. AF_PACKET on an xfrmi device) reach the xfrm output path without IP header validation, but xfrm4_transport_output() uses iph->ihl for __skb_pull() and memmove() and expects the header to be valid. vti_tunnel_xmit() already calls pskb_inet_may_pull() before handing packets to the xfrm output path. Do the same in xfrmi_xmit() and perform the header checks ip_rcv_core()/ip6_rcv_core() do on entry to the IP stack: reject wrong IP versions and malformed IPv4 header lengths.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99776

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: clear stale client pointer on close p9_usbg_close() tears down the client transport, but usb9pfs keeps using usb9pfs->client from asynchronous TX and RX completion handlers. A late completion can therefore dereference a client that has already been freed during mount teardown. Clear usb9pfs->client under usb9pfs->lock when closing the transport, detach any pending TX request from in_req->context, and make the TX/RX completion handlers bail out once the transport has been detached. This keeps late completions from touching a freed or rebound p9_client.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99777

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99778

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix out_req buffer leak in disable_usb9pfs usb9pfs->out_req is allocated with alloc_ep_req(), which also allocates the request's data buffer (req->buf). disable_usb9pfs() frees it with plain usb_ep_free_request(), which only frees the usb_request structure itself and leaks req->buf on every close. Use free_ep_req() instead, matching the allocator, as documented by its own comment ("Requests allocated via alloc_ep_req() *must* be freed by free_ep_req()").

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99768

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99770

    In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99771

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reload TDLS header pointer after skb_linearize() ieee80211_process_tdls_channel_switch() sets tf = skb->data before it calls skb_linearize(), and reads tf->action_code afterwards. ieee80211_rx_h_data() queues TDLS channel switch requests and responses to the interface after pulling only offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be non-linear when the interface work handles it. Drivers that build paged RX skbs do this for every frame that does not fit into the skb head, e.g. iwlwifi (mvm), which is also the only mac80211 driver that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data does not fit into the tailroom, skb_linearize() moves the data to a new head and frees the old one, and the action code is then read from freed memory. Depending on what that memory holds by then, the frame is handled as before or ends in the WARN_ON_ONCE() of the default case. The frame only has to be a data frame with the TDLS ethertype from an authorized peer, e.g. relayed by the AP from another station in the BSS; the read happens before the sender is checked to be a TDLS peer. Load tf after skb_linearize(), as the request and response handlers already do. Found by static analysis tool CodeQL.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99565

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99556

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize directory emptiness checks with readdir SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir() on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same filp without that lock. iterate_dir()'s inode read lock permits concurrent readers and does not serialize per-file iterator state. ext4 stores its dx readdir cursor and fname RB tree in file->private_data. Concurrent reset or refill can therefore free a fname node while the other worker still traverses it or retains its RB-tree link, resulting in use-after-free accesses. An authenticated SMB client with list and delete rights on a directory in a writable KSMBD share backed by ext4 can trigger this when the directory takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION on one live FileId. In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at 171df27077fb, the unmodified kernel reported a cross-worker use-after-free before a panic. The first report's access and free stacks show the two request paths directly (trimmed): BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550 Read of size 8 by task kworker/2:0/29 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ext4_htree_store_dirent+0x488/0x550 htree_dirblock_to_tree+0x535/0x990 ext4_htree_fill_tree+0x319/0xba0 ext4_readdir+0x175a/0x2f40 iterate_dir+0x1b6/0x630 smb2_query_dir+0x1003/0x1cc0 Freed by task 279: free_rb_tree_fname+0x67/0xc0 ext4_readdir+0x13a9/0x2f40 iterate_dir+0x1b6/0x630 ksmbd_vfs_empty_dir+0xa2/0x100 smb2_set_info+0x2ffa/0x45d0 Take fp->readdir_lock across the entire emptiness check. This places both iterators over that handle's filp in the same lock domain while preserving the disposition status handling. The exact code change completed a warning-free x86_64 KASAN bzImage build. Tracing three request pairs showed that the two iterate_dir() calls no longer overlapped and the expected statuses were preserved. A further 1,600 reproducer iterations completed with expected statuses and no KASAN report, Oops, or panic. The reproducer and complete guest configuration are available privately to maintainers on request.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99557

    In the Linux kernel, the following vulnerability has been resolved: ceph: fail readdir when the MDS reply carries no dirfrag A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR request with a reply whose extra blob is empty. parse_reply_info() skips reply blobs whose length is zero, so parse_reply_info_readdir() never runs, r_reply_info.dir_dir stays NULL, and the reply still parses as successful. ceph_mdsc_do_request() returns 0 and ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check: /* extra */ ceph_decode_32_safe(&p, end, len, bad); if (len > 0) { ... err = parse_reply_info_extra(&p, p + len, req, features, s); ... } The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the mount root after an ms_mode=legacy mount, trimmed: BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:ceph_readdir+0xbff/0x3ea0 Call Trace: <TASK> ? __pfx_ceph_readdir+0x10/0x10 wrap_directory_iterator+0xa2/0xe0 iterate_dir+0x1da/0x5d0 __x64_sys_getdents64+0x13b/0x2a0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The unconditional frag read came in with 81c6aea5275ea ("ceph: handle frag mismatch between readdir request and reply"), so the bug is old. Treat a reply with no dirfrag as a protocol violation: warn once, drop the request and return -EIO, the same way ceph_readdir() already handles the two malformed-reply cases later in the function. Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the getdents64(2) above takes the machine down (oops=panic) on the first READDIR reply. With the patch it warns once and getdents64(2) returns -EIO, no oops, no hang. A conformant reply for an empty directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE — still lists "." and ".." and returns EOF on both kernels, so normal readdir behavior is unchanged. The oops is still present in v7.3-rc5 (72d3fcf802c45).

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99561

    In the Linux kernel, the following vulnerability has been resolved: fork: don't create io threads once PF_POSTCOREDUMP is set zap_process() skips every thread that already has PF_POSTCOREDUMP set. Such a thread is past synchronize_group_exit(), so a coredump can't catch it anymore. It isn't counted in core_state->threads_remaining and it isn't sent SIGKILL. do_exit() sets PF_POSTCOREDUMP in synchronize_group_exit() and calls io_uring_files_cancel() right after that. The cancellation runs task work and a create_worker_cb() that io-wq queued before the exit creates a new io-wq worker from there. If another thread started a coredump in the meantime that worker joins a thread-group which is already being dumped. zap_process() never saw it so it was never counted. But when it exits it sees signal->core_state in synchronize_group_exit() and decrements threads_remaining like any other thread. So the count reaches zero one thread early and the dumper leaves coredump_wait_inactive() while a thread it counted is still running. The task has no fatal signal pending because zap_process() deliberately didn't send it one, and it never went through get_signal() so it doesn't have PF_SIGNALED either. Refuse to create an io thread when the creator has PF_POSTCOREDUMP. That costs nothing. io_uring_files_cancel() raises IO_WQ_BIT_EXIT before it runs any task work, so a worker created from there only ever gets to exit again, and io_should_retry_thread() doesn't retry -EINTR. Clearing PF_POSTCOREDUMP for the new thread in copy_process() was the other option. It makes the worker a thread like any other, but it only helps while the dump hasn't started. A worker born after zap_process() has run is invisible to it whatever its flags say and still decrements threads_remaining on the way out. Refusing to create it covers both, and then no task is ever born with the flag, so there is nothing to clear. Moving io_uring_files_cancel() ahead of synchronize_group_exit() closes the same window. It runs the cancellation, and whatever that can block on, before the thread announces itself to the dumper. A thread that blocks there never reaches coredump_task_exit() at all, so the dumper ends up waiting for a thread that never parks. Refusing the creation leaves the cancellation where it is. But it's very ugly to run io_uring work even before we did all the generic exit work.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99548

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix early procfs exposure race Currently, init_cifs() calls cifs_proc_init() near the beginning of the function, before INIT_LIST_HEAD, leading to a momentarily uninitialized, but exposed, procfs. If a userspace process reads this empty procfs, iterating over a zeroed list_head leads to a NULL pointer dereference and a kernel oops/panic. For example, if a delay is added between cifs_proc_init() and INIT_LIST_HEAD, and a userspace process is polling /proc/fs/cifs/DebugData, the following oops occurs: BUG: kernel NULL pointer dereference, address: 0000000000000608 Oops: Oops: 0000 [#1] SMP PTI CPU: 0 UID: 0 PID: 3477 Comm: cat Not tainted 7.3.0-02212-g4df4d2a577db-dirty #6 PREEMPT(lazy) RIP: 0010:cifs_debug_data_proc_show+0x103/0xd80 [cifs] Call Trace: <TASK> ? seq_read_iter+0x86/0x400 ? seq_read_iter+0x86/0x400 seq_read_iter+0x183/0x400 proc_reg_read_iter+0x62/0x90 copy_splice_read+0x215/0x310 splice_file_to_pipe+0xec/0x1c0 do_splice+0x4b8/0x780 __se_sys_splice+0x18f/0x250 do_syscall_64+0x109/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by moving cifs_proc_init() down in init_cifs(), ensuring it runs only after all internal lists, locks, counters, and workqueues are fully ready, but before registering the filesystem. Update the error cleanup ladder and exit_cifs() to maintain proper LIFO order.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99549

    In the Linux kernel, the following vulnerability has been resolved: smb: client: do not pass a NULL buf to is_oplock_break() receive_encrypted_read() sets *num_mids = 1 and never writes the caller's bufs[]. Offload returns -1 with *num_mids = 0, so the demultiplex thread skips the frame. The inline decrypt path returns 0 even when smb2_find_mid() fails. cifs_demultiplex_thread() then treats mids[i] == NULL as an oplock break and calls is_oplock_break(bufs[i], server) with bufs[i] still NULL. smb2_is_valid_oplock_break() reads hdr.Command at offset 12 and oopses. A large encrypted READ whose MessageId does not match is enough to panic cifsd. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 100 Comm: cifsd RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs] cifs_demultiplex_thread Kernel panic - not syncing: Fatal exception Return -1 when inline decrypt finds no mid, and skip is_oplock_break() plus the unknown-frame dump when bufs[i] is NULL. receive_encrypted_standard() already assigns bufs[*num_mids].

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99550

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: pin owning modules for open debugfs files The OCFS2 debugfs file operation tables do not set owner. The full debugfs proxy obtains real_fops with fops_get() at open and keeps it until final release. Without an owner, this does not acquire a reference to the module containing the table and its callbacks. Removing the debugfs entries does not drain retained open files. An open connected_nodes file can therefore outlive ocfs2_nodemanager and make full_proxy_release() read real_fops->release from freed module memory. Heming also reproduced the issue with fs_state and asked for the other OCFS2 debugfs operation tables to be checked. Set owner to THIS_MODULE in all eleven explicit debugfs operation tables: five in ocfs2_nodemanager, four in ocfs2_dlm, and two in ocfs2. The existing debugfs get/put pair then holds the appropriate module until final release. Leave the open, read and release callbacks unchanged. The blockcheck table already sets owner through DEFINE_DEBUGFS_ATTRIBUTE(), so it needs no change. The original controlled test used an unloadable OCFS2 module and case-local probe filters without changing the candidate open, unload or release logic. Closing a retained connected_nodes file after normal unload produced: BUG: unable to handle page fault for address: fffffbfff804cfef Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0xbf/0x190 Call Trace: <TASK> __fput+0x39a/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Modules linked in: [last unloaded: ocfs2_nodemanager]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99551

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: drain quorum work before removing the cluster The configured cluster must remain available until an in-flight quorum decision has finished using its fencing method. o2quo_make_decision() drops qs_lock before calling o2quo_fence_self(), which marks heartbeat regions for unclean stop and then reads o2nm_single_cluster->cl_fence_method. Cluster removal clears the singleton without waiting for this independent system-workqueue item. When a failed-quorum decision overlaps removal of the heartbeat regions, nodes and cluster through configfs, the worker can be preempted after marking the regions and resume after the singleton has been cleared: Quorum worker Configfs removal select fence; drop qs_lock o2hb_stop_all_regions() remove regions; join heartbeat threads remove nodes; stop o2net clear singleton; release cluster read cl_fence_method The resumed read dereferences NULL instead of applying the configured fencing method. The heartbeat thread's dependency protects the local node only until the thread exits, and draining o2net does not wait for qs_work. Add o2quo_flush_work() to drain pending or running quorum decisions before clearing the singleton in o2nm_cluster_group_drop_item(). By this point the heartbeat regions and nodes have been removed, so their work publishers are stopped. The worker can finish while the cluster and its configured fencing method remain available. It does not acquire the configfs mutex held by the removal path. Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown and initialization failure, and have it call the same drain helper. Cluster removal uses only the explicitly named drain operation. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df] CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events o2quo_make_decision RIP: 0010:o2quo_fence_self+0x65/0x200 Register dump omitted. Call Trace: <TASK> o2quo_make_decision+0x345/0x3a0 ? __pfx_o2quo_make_decision+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99552

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99554

    In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: do not advance rx_skb->data on dropped frames For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive header by advancing pegasus->rx_skb->data in place. This is done before the pkt_len > PEGASUS_MTU check, and when that check drops the frame the good path resubmits the same skb with the advanced rx_skb->data as the transfer buffer, still PEGASUS_MTU bytes long. Every frame with an oversized length field therefore moves the receive buffer two more bytes towards the end of the skb data area. A device that keeps sending such frames makes the host controller write received data over skb_shared_info and past the end of the allocation, and the corrupted skb_shared_info is used when the skb is eventually freed. With an emulated device sending frames filled with 0x5a on a KASAN kernel: BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd] Write of size 1536 at addr ffff888105821202 by task swapper/1/0 ... Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67] RIP: 0010:skb_release_data+0x36f/0x800 Only skip the header with skb_reserve() once the frame is going to be passed up, so the receive buffer always starts at the beginning of the skb data area. Unlike the old pointer adjustment, skb_reserve() also moves skb->tail, so the two header bytes now count against the buffer size: lower the length limit for the 0x8513 accordingly, otherwise a pkt_len of PEGASUS_MTU - 1 or PEGASUS_MTU would trip skb_over_panic(). Found by code review with LLM assistance and reproduced with an emulated USB device (raw-gadget + dummy_hcd).

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99555

    In the Linux kernel, the following vulnerability has been resolved: media: usbtv: fix null-pointer dereference on disconnect A null-pointer dereference can occur in usb_make_path() when called from usbtv_querycap() (and other ioctl handlers) during device disconnection. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] RIP: 0010:usb_make_path include/linux/usb.h:985 [inline] RIP: 0010:usbtv_querycap+0x9c/0x100 drivers/media/usb/usbtv/usbtv-video.c:612 ... Call Trace: <TASK> v4l_querycap+0x236/0x470 drivers/media/v4l2-core/v4l2-ioctl.c:1106 __video_do_ioctl+0x8af/0xc70 drivers/media/v4l2-core/v4l2-ioctl.c:3133 video_usercopy+0x860/0x1430 drivers/media/v4l2-core/v4l2-ioctl.c:3475 v4l2_ioctl+0x18d/0x1e0 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 This happens due to a race condition between the USB device disconnect routine (usbtv_disconnect()) and V4L2 ioctls. When the device is disconnected, usbtv_disconnect() sets usbtv->udev = NULL without holding the usbtv->v4l2_lock mutex. Concurrently, an ioctl handler like usbtv_querycap() can be executing under the v4l2_lock and attempt to use usbtv->udev, leading to a crash. To fix this, move the usbtv->udev = NULL assignment into usbtv_video_free() and protect it with mutex_lock(&usbtv->v4l2_lock). This ensures that no non-queue ioctl handler can run concurrently with the pointer being nullified. If an ioctl is already running, the mutex will block the disconnect path until the ioctl finishes. If an ioctl is blocked waiting for the lock, it will acquire it after the disconnect routine releases it, but will then check video_is_registered() (which was cleared by vb2_video_unregister_device()) and safely return -ENODEV. Acquiring v4l2_lock after vb2_video_unregister_device() avoids reintroducing a historical deadlock issue, and usbtv_audio_free() remains safe as it is called before usbtv_video_free().

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99543

    In the Linux kernel, the following vulnerability has been resolved: backlight: qcom-wled: Fix NULL pointer dereference in wled_remove() wled_probe() doesn't set the driver data for the platform device. As a result, platform_get_drvdata() in wled_remove() will return NULL, and the first dereference of it crashes on unbind. Set the platform device driver data in wled_probe().

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-99544

    In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Bounds check the shared ring buffer indices In a CoCo VM the host is untrusted. Since the VMBus ring buffer read and write indices live in shared memory, the guest has to treat both as potentially malicious. hv_ringbuffer_write() copies into the ring at write_index with no bounds checking, so the host can make the guest write packet data at any offset up to 4 GiB past the start of the ring buffer. read_index matters too: the available space derived from both indices is the only bound on how much is copied, and an out-of-range index can make it far larger than the ring. The fix is to validate both indices before use and to use the validated snapshot instead of re-accessing. For invalid indices, hv_ringbuffer_write() logs and returns -EIO. One re-read of write_index is left unchecked in this patch: hv_get_ring_bufferindices() fetches it again for the prev_indices trailer. The value is only returned to the host and is not used as an offset or length for indexing. Since this is not a security issue, it is addressed later in the series. Open-coding the bytes available arithmetic keeps the fix free of prerequisites; a later patch refactors it into a helper function.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed

CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.