CVEs of 2026.
Every CVE published in 2026 that we hold, ranked by exploit odds.
-
CVE-2026-98929
In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.
-
CVE-2026-98917
In the Linux kernel, the following vulnerability has been resolved: parisc: Increase kernel stack size to 32kb For 64-bit Linux kernels, increase the default kernel stack size (THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been triggered recently when building the debian vtk9 package with gcc 17: stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000) Kernel panic - not syncing: low stack detected by irq handler - check messages CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE Tainted: [W]=WARN Hardware name: 9000/800/rp3440 Workqueue: writeback wb_workfn (flush-259:0) Backtrace: [<000000004022f050>] show_stack+0x70/0x90 [<000000004022378c>] dump_stack_lvl+0x124/0x190 [<000000004022382c>] dump_stack+0x34/0x48 [<000000004020212c>] vpanic+0x204/0x648 [<00000000402025c4>] panic+0x54/0x58 [<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440 [<0000000040227070>] intr_return+0x0/0xc
-
CVE-2026-99765
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs() *before* the ACL is linked onto tpg->acl_node_list by target_add_node_acl(): core_tpg_check_initiator_node_acl(): ... core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */ target_add_node_acl(acl); /* only now listed */ The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only tpg->acl_node_list, so a dev entry whose ACL is still in the window above is invisible to the sweep and is never disabled. It is left on the se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when the same unpacked_lun is later re-added and the se_lun is reallocated at the same address, the stale dev entry is rediscovered by target_nacl_find_deve() and core_enable_device_list_for_node() corrupts lun_deve_list: BUG: KASAN: slab-use-after-free ... core_enable_device_list_for_node+0x5ce/0x880 core_tpg_add_node_to_devs+0x169/0x190 core_dev_add_lun+0x146/0x190 target_fabric_port_link+0xe9/0x1b0 configfs_symlink+0x381/0xae0 __x64_sys_symlink+0x55/0x80 The demo-mode login path that drives the ACL/dev-entry creation is reachable by an unauthenticated initiator; the colliding LUN add/remove is a local configfs operation. Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode automatic path, core_tpg_add_node_to_devs() -> core_enable_device_list_for_node(), was never given the equivalent guard, and the publish-after-populate ordering in core_tpg_check_initiator_node_acl() was left unchanged. Fix it in three cooperating parts: 1) Publish the dynamic NodeACL onto acl_node_list *before* creating its dev entries, so the teardown sweep can observe them. 2) Refuse to attach a dev entry to an se_lun that is shutting down, checked under nacl->lun_entry_mutex -- the same lock the sweep takes -- so once the sweep has passed an ACL any later enable for that LUN observes lun_shutdown and skips it. 3) In core_enable_device_list_for_node(), insert the new dev entry onto lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both the replace and the new-entry branch. Previously the entry was added to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only after dropping it; with the ACL now published early, the sweep could take the mutex in that gap, find the entry on the hlist, core_disable_device_list_for_node() it (list_del() on the not-yet- linked lun_link succeeds and the entry is freed), and then the enable would list_add_tail() the freed entry back onto lun_deve_list. Linking both lists under the mutex makes enable and the sweep mutually exclusive, closing that window. core_tpg_add_node_to_devs() already ignores the return value of core_enable_device_list_for_node(), so a shutting-down LUN is simply skipped.
-
CVE-2026-99745
In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Select the BHI mitigation based on the attack vector properly The BHI mitigation selection is inconsistent with the documentation (attack_vector_controls.rst), which lists BHI under both the user->kernel and guest->host attack vectors. bhi_select_mitigation() only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set. As a result, a kernel compiled with KVM disabled gets BHI automatically disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM. This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing loop by default. Booting with mitigations=auto,no_guest_host has the same effect. Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case. [ bp: Clarify commit title. ]
-
CVE-2026-99726
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Widen cache_clean_lock over the whole L2TCACTL sequence v3d_clean_caches() and v3d_flush_l2t() both write the single L2TCACTL register and poll its status bits. The mutex cache_clean_lock exists to serialize them, but v3d_clean_caches() only took the lock around its final FLM_CLEAN write. These functions run concurrently: v3d_flush_l2t() is issued from the BIN/RENDER/CSD invalidate path while v3d_clean_caches() runs from the CACHE_CLEAN queue, and each queue's scheduler uses its own ordered workqueue, so their run_job callbacks execute in parallel. Because clean locked only its final write, a concurrent flush can write L2TCACTL during clean's unlocked phase. Both use non read-modify-write writes to the one register, so whichever lands last wins: clean's TMUWCF write can land on the flush's in-flight L2TFLS invalidate, triggering the GFXH-1897 hazard of writing L2TCACTL while a flush is pending. Hold cache_clean_lock across the entire L2TCACTL access sequence so it is fully mutually exclusive with v3d_flush_l2t(), which already takes the lock around its own write.
-
CVE-2026-99698
In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of CMA areas reserved at a fixed address CMA areas allocated from memblock have their memory accepted by memblock_alloc_range_nid(), but areas reserved at a fixed address with memblock_reserve() are not. If a fixed CMA area is requested by the cma=<size>@<base> command line parameter, it may be in regular RAM and on TDX and SEV-SNP guests it must be accepted. Accept the memory of fixed CMA areas as well, so that all CMA areas are accepted regardless of how they were reserved.
-
CVE-2026-99699
In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of multi-range CMA areas Patch series "mm/cma: accept memory of CMA areas reserved with memblock_reserve()", v1. Pages of allocated CMA areas are released to the buddy allocator with __free_pages(), which does not check for unaccepted memory. This usually works because memblock accepts the memory it allocates. However, multi-range CMA areas, used by hugetlb_cma, and fixed CMA areas requested with cma=<size>@<base> are reserved with memblock_reserve() and their memory is never accepted. On TDX and SEV-SNP guests the first access to such a page is fatal. To ease the backporting, each case is addressed by a separate patch: - patch 1 accepts the memory of multi-range CMA areas - patch 2 does the same for the fixed CMA areas The second patch won't apply cleanly to 6.6 and 6.12, but I believe the stable team LLMs will take care of that :) This patch (of 2): On systems with unaccepted memory, memblock allocations accept the allocated range, but when cma_declare_contiguous_multi() uses open coded allocation of multiple ranges, it reserves them with memblock_reserve() and they are never accepted. These pages are released to the buddy allocator by cma_activate_area() with __free_pages() that does not check for unaccepted memory, so the first access to such a page in a TDX or SEV-SNP guest is fatal. Accept the memory of each range when it is reserved.
-
CVE-2026-99700
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb_vmemmap: map the shared tail page writable page_ref_add_unless_zero() reads the refcount and then updates it with a cmpxchg. A lockless get, such as a page cache lookup or a PFN scanner, can read a non-zero refcount from a page that is then freed and reused as a hugetlb tail page. If HVO remaps its struct page to the shared tail page in between, the cmpxchg writes to read-only vmemmap: CPU0 (lockless get) CPU1 c = atomic_read(&page->_refcount) page freed page allocated as a hugetlb tail HVO remaps the struct page RO try_cmpxchg(&page->_refcount, &c, c + 1) -> write fault on read-only vmemmap The refcount is zero by then and the compare fails, but a compare-and-swap instruction needs write access whether or not it succeeds. The kernel oopses when hugetlb pages are allocated at runtime with HVO enabled while a lockless get races with it. Commit bd225530a4c7 ("mm/hugetlb_vmemmap: fix race with speculative PFN walkers") closed the window with RCU on both sides. The RCU was removed together with fake heads, on the wrong belief that it was only needed for them. Map the shared tail page writable instead of restoring the RCU. Every struct page on it is a tail with a zero refcount, so a late cmpxchg fails and leaves the page unchanged. RCU would put rcu_read_lock() back around every get and synchronize_rcu() back into hugetlb allocation and freeing. The cost is the protection against stray writes to tail struct pages. The shared page is shared by all hugetlb folios of the same order in the zone, so such a write now corrupts all of them instead of oopsing. Bootmem folios optimized when the memmap is set up keep their tails read-only. Nothing does a lockless get on them before hugetlb takes them over.
-
CVE-2026-99686
In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1).
-
CVE-2026-99687
In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands.
-
CVE-2026-99675
In the Linux kernel, the following vulnerability has been resolved: nvmet: reject keep-alive timeouts that would overflow nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000). The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above 4294966296 ms wraps around and rounds to 0 seconds. A Set Features command with KATO 0xffffffff then succeeds but disables the keep-alive timer: Get Features returns 0 and Keep Alive fails with Keep Alive Timeout Invalid. A Connect command with such a KATO creates a controller without a keep-alive timer. The converted value has more consumers that can overflow. Get Features multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits and arm a delay that must not exceed MAX_JIFFY_OFFSET. Reject a KATO whose rounded value does not fit all of these. Return Keep Alive Timeout Invalid from both Set Features and Connect. Validate Set Features before stopping the current timer so a failed update leaves its timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current meaning.
-
CVE-2026-99681
In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return.
-
CVE-2026-99664
In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport.
-
CVE-2026-99665
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: preserve dirty bits when collapsing PTE-mapped THPs try_collapse_pte_mapped_thp() clears PTEs without transferring their dirty bits to the folio. A shmem read fault can map a clean folio writable, so a later store only dirties the PTE. Losing that dirty bit allows reclaim to discard modified data. The assumption that regular files are read-only is also obsolete since commit 1b6444331bebb ("mm/khugepaged: enable clean pagecache folio collapse for writable files"). In any case, transferring PTE dirty bits to the folio when removing mappings (and while the folio is still mapped) is the right thing to do. Use get_and_clear_ptes() to collect the dirty bits and mark the folio dirty before unmapping it. Update the comment. This was reproduced with shmem using MADV_COLLAPSE followed by MADV_PAGEOUT. Fix generated by an LLM and sent by Chris Mason in private. [ david: adjust comment; simplify description; cover file-thp as well ]
-
CVE-2026-99666
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]
-
CVE-2026-99648
In the Linux kernel, the following vulnerability has been resolved: mm/vma: call ->may_split() before a partial merge A driver can use the ->may_split() hook to forbid a VMA boundary at certain addresses. A device-dax device is a character device that gives raw access to a range of memory through mmap(). device-dax refuses any address that is not a multiple of the device's alignment through vm_ops->may_split. vma_merge_existing_range() can move boundaries, but does not call vm_ops->may_split. If a range at the edge of a VMA gets the attributes of the adjacent VMA, the function moves only that range over to the neighbour: one VMA shrinks and the other grows. This is a partial merge, and vma_modify() tries it before any split. Take a device-dax VMA that lies next to another VMA of the same file. The user calls mprotect() on the one page of the first VMA that touches the second VMA, and asks for the protection that the second VMA already has. The result is a partial merge. It puts the boundary inside a 1 GiB mapping, which is a single leaf entry at the PUD level. As part of the merge, the kernel looks for a huge PMD to split at the new boundary. That code does not expect a PUD leaf: vma_merge_existing_range() commit_merge() vma_adjust_trans_huge() split_huge_pmd_address() mm_find_pmd() treats the PUD leaf as a pointer to a PMD table, so the "table" is the device memory that the leaf maps __split_huge_pmd() reads a PMD that the user wrote to the device memory folio_put() on the folio that this PMD names Bad. While the code must at some point be taught to split PUD entries as well, the issue here is that we move VMA boundaries such that they are incompatible with the driver. Fix this by calling ->may_split() on the address that a partial merge would move the boundary to, and by abandoning the merge if the driver refuses. vma_modify() then tries the split, which fails with -EINVAL. Factor out existing split handling into check_split() and reuse it. Fix generated by an LLM and sent by Chris Mason in private. [ david: improve description; cleanup the code ]
-
CVE-2026-99631
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check amdgpu_vm_ready() in dma-buf move notify amdgpu_dma_buf_move_notify() touches the page tables without first calling amdgpu_vm_ready(). When a process is SIGKILLed, its VM entities are stopped. Teardown of an imported dma-buf then tries to clear PTEs by submitting to one of those stopped entities. That eventually hangs the task. Commit aa5fc4362fac ("drm/amdgpu: fix task hang from failed job submission during process kill") added the stopped entity check in amdgpu_vm_ready() and used it in amdgpu_cs_vm_handling(). That did not cover a call in amdgpu_dma_buf_move_notify(), what was already mentioned in: https://lists.freedesktop.org/archives/amd-gfx/2025-October/133076.html Tested by SIGKILLing a GPU workload holding imported dma-bufs. Without the patch "Trying to push to a killed entity" errors are logged, then a task hangs. With the patch there are no hung tasks. This was tested on a 6.18 kernel. (cherry picked from commit bee5c9d7a34cb1b510ad3b4c18c30f9d38b0ab7d)
-
CVE-2026-99623
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Clamp the ATIF backlight curve to its 99 points amdgpu_atif_query_backlight_caps() stores the firmware's number_of_points as data_points but copies only the 99 points that luminance_data[] holds. number_of_points is a u8, so a firmware table that claims more makes the custom curve code in amdgpu_dm index past the array, and dm_query_extended_brightness_caps() copy past the end of the data_points[] buffer it fills Clamp the count to ATIF_QBTC_MAX_DATA_POINTS and warn, since a table that claims more is a firmware bug (cherry picked from commit af8a1c2b7d3de4960e10f94e8ba2fc0ccd168072)
-
CVE-2026-99592
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix global ASID handed out to two processes On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE global ASID value. The two then hit each other's TLB entries, so each can read or corrupt the other's memory. The global ASID space is managed lazily. When a global ASID is freed, its bit is set in the global_asid_freed bitmap. Once the free ASID search reaches the end of the global_asid_used bitmap, a global flush is done to really reclaim the lazily freed global ASIDs. However, the current code can assign the same global ASID to two different processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in use) until the search wraps around again. At that point a third process could also get assigned MAX_ASID_AVAILABLE. the highest ASID stays in use, so it is not handed out again last_global_asid stays below it, so no reset the clear bits run out find_next_zero_bit() returns MAX_ASID_AVAILABLE global_asid_available > 0, so the failure is not caught MAX_ASID_AVAILABLE is handed out as an ASID A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that this value is in use. The next failed search hands it out again, even if the first process still holds it. The fix used here is to reset the global ASID space after a failed search, and to search again. If that search fails too, no global ASID is handed out. The test for !global_asid_available is removed, because use_global_asid() only calls allocate_global_asid() if global_asid_available > 0. The remaining test is for a condition that should be impossible. [ riel: simplify code, massage changelog and comment ]
-
CVE-2026-99585
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Use kvm_s2_fault_vma_info in gmem_abort() gmem_abort() maps at s2fd->fault_ipa, which HPFAR_EL2 holds at 4K granularity whatever the page size. The generic page-table code aligns it, but pkvm_pgtable_stage2_map() looks up existing mappings over [addr, addr + size), so on a pKVM host with pages larger than 4K a guest_memfd-backed guest that faults past the first 4K of a page can find its neighbour's mapping, get -EAGAIN and take the same fault forever. The memory fault exit reports s2fd->fault_ipa too, which for a nested guest's fault is the nested IPA rather than the canonical one kvm_gmem_get_pfn() failed on. Take the addresses from kvm_s2_fault_vma_info instead, as user_mem_abort() does, and report the canonical gfn in the memory fault exit. kvm_s2_fault_get_vma_info() itself isn't called: a guest_memfd memslot's userspace_addr doesn't need to be backed by a VMA.
-
CVE-2026-99566
In the Linux kernel, the following vulnerability has been resolved: assoc_array: keep gc's cleanup out of the live tree on allocation failure assoc_array_gc() builds a copy of the tree. Where the copy reaches a shortcut, it allocates the copy of the shortcut with kmalloc_flex(), fills it with memcpy(), links it into the new tree, and only then allocates the copy of the node after it. The memcpy() leaves the new shortcut's next_node pointing at the old tree's node, so if that second allocation fails, the cleanup, assoc_array_destroy_subtree() on the new tree, follows the new shortcut into the old tree, and the BUG_ON() on the old node's back pointer fires. Allocate the node first, and the shortcut once the node exists, freeing the node again if the shortcut cannot be allocated. A copied shortcut is then only linked into the new tree when the copy of its node is there to follow it. Nothing else changes: with no allocation failing, the trees gc builds are the same as before. Found by a userspace test that makes each allocation of each operation fail in turn.
-
CVE-2026-99527
In the Linux kernel, the following vulnerability has been resolved: spmi: Fix potential use-after-free by grabbing of_node reference As noticed by Sashiko during a review run of an unrelated patch, in of_spmi_register_devices(), for_each_available_child_of_node() is used to loop through children, and to also assign a node to a newly created SPMI child device. Problem is that the refcount is dropped at every iteration so, in the specific case of DT overlays, a use-after-free may occur when an overlay is dynamically unloaded! To resolve this, increase the of_node refcount when assigning (in function of_spmi_register_devices) and release the reference in spmi_device_remove().
-
CVE-2026-99520
In the Linux kernel, the following vulnerability has been resolved: pps: generators: fix use-after-free when closing a removed device The cdev of a PPS generator is embedded in struct pps_gen_device, but nothing ties the lifetime of that structure to the cdev: pps_gen is freed by the release function of its device, and an open file holds a device reference only until pps_gen_cdev_release() drops it. When the generator is unregistered while /dev/pps-genN is open, that put_device() drops the last reference and frees pps_gen, and __fput() then calls cdev_put() on the freed cdev: BUG: KASAN: slab-use-after-free in cdev_put+0x53/0x60 Read of size 8 at addr ffff88801383e138 by task ppsgen64/149 Call Trace: cdev_put+0x53/0x60 __fput+0x745/0xad0 fput_close_sync+0xd9/0x1b0 __x64_sys_close+0x86/0xf0 ... Freed by task 149: kfree+0x25a/0x6d0 device_release+0xca/0x3c0 kobject_put+0x169/0x320 pps_gen_cdev_release+0x51/0x80 __fput+0x36a/0xad0 pps.c had the same bug, fixed in commit c79a39dc8d06 ("pps: Fix a use-after-free"). Fix it the usual way: embed the struct device in pps_gen_device and register both with cdev_device_add(). This makes the device the parent of the cdev, so the cdev holds a device reference until the last file is closed.
-
CVE-2026-99498
In the Linux kernel, the following vulnerability has been resolved: s390/kprobes: Prevent kprobes on instructions with exception table entry The mvcos exception handler ex_handler_ua_mvcos() decodes the faulting instruction, assuming it is an mvcos instruction. In case the instruction is kprobed the decoded instruction is a breakpoint instruction instead, which leads to incorrect instruction decoding and potential register corruption. Fix this by simply preventing to set a kprobe on such instructions, similar like arm64 is doing it.
-
CVE-2026-99486
In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]
-
CVE-2026-99487
In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.
-
CVE-2026-99462
In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look up the end-edge straddler by index In truncate_inode_partial_folio(), after the first split at the start edge, folio_split() unlocks and drops the refcount of the after-split sub-folios. The sub-folio straddling the end of the truncation range is therefore unlocked and only transiently ref'd in the page cache while the code still derives it from a page pointer inside the original folio. Between the first split finishing and page_folio() resolving split_at2, that tail page can be reclaimed, freed and reallocated as a new large folio in the same mapping at a different file offset. folio2 then points at a folio that does not cover the end boundary, yet folio2->mapping == folio->mapping still holds, so the stale pointer passes the mapping check and folio_split_or_unmap() splits a folio at a wrong position (or, with a transient refcount, a use-after-free window opens between try_get and the split). __folio_split()'s own folio != page_folio(split_at) check cannot catch this either since split_at2 has been reallocated as part of the new folio, so page_folio(split_at2) resolves back to folio2. Look the straddler up by its page index instead. __filemap_get_folio() returns the folio currently covering the boundary, ref'd and locked, with the mapping validated under the lock, so the split target is always the real folio at the end edge.
-
CVE-2026-99294
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fwd_netdev: use recursion counter in neigh egress path nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the forwarding rule targets the same device or two devices forward to each other, neigh_xmit() triggers dev_queue_xmit() which re-enters nf_hook_egress(), causing infinite recursion and stack overflow. Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT to the shared header nf_dup_netdev.h as a static inline, so that nft_fwd_netdev can use the recursion counter directly without exported function call overhead. Guard neigh_xmit() with the same recursion limit already used in nf_do_netdev_egress(). [ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
-
CVE-2026-121876
A flaw was found in the interaction between systemd-gpt-auto-generator and confidential computing guest VM images in OpenShift Sandboxed Containers (confidential peer pods). systemd-gpt-auto-generator automatically discovers and mounts GPT partitions by type GUID at boot with no user confirmation. In the confidential computing threat model, where the host/hypervisor is the adversary, a malicious host can inject partitions into the guest's virtual disk. Most critically, injecting a swap partition causes the guest kernel to page out TEE-encrypted memory to a host-controlled block device, breaking the confidentiality guarantee of the hardware TEE (AMD SEV-SNP, Intel TDX). The PodVM images use a GPT-partitioned disk with dm-verity on the root partition. However, the roothash= kernel parameter only disables root auto-discovery — non-root partitions (swap, /home, /var, /srv, /var/tmp) are still auto-discovered and mounted. The generator is shipped unmasked in the RHEL systemd-udev subpackage, and no kernel command line parameter in the measured UKI addon disables it. Additionally, the PodVM measurement script captures PCRs 3, 9, 11, and 12, but not PCR 5 (GPT partition table), so partition table modifications are not detected by remote attestation.
-
CVE-2026-113362
Improper Access Control in the program installation folder in NEC Corporation WebSAM Winshare Ver 7.5.0 and earlier (excluding Ver 7.3.3), Ver 7.6.0 and Ver 7.7.0 through 7.7.1 on Windows allows a locally authenticated low-privileged attacker to execute arbitrary code with SYSTEM privileges via a crafted DLL file that is loaded by a SYSTEM-level process.
-
CVE-2026-103665
The installer for Yamaha LAN Monitor for Windows provided by Yamaha Corporation may insecurely load Dynamic Link Libraries (DLLs). When the installer is launched in a directory containing a specially crafted DLL file, the malicious DLL may be loaded, resulting in arbitrary code execution with administrative privileges.
-
CVE-2026-81472
Dell iDRAC Service Module (iSM) for Windows, Dell iDRAC Service Module (iSM) for Linux, and Dell iDRAC Service Module (iSM) for ESXi, versions prior to 6.1.1.0, contains an Improper Control of Generation of Code ('Code Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.
-
CVE-2026-113899
The issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to cause unexpected system termination.
-
CVE-2026-99099
In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Fix AMD TLBI Erratum #1718 The processor may fail to invalidate a TLB entry while executing an INVLPGB/TLBSYNC instruction pair. Detect the erratum and apply a software workaround when a microcode fix is not present.
-
CVE-2026-99065
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus() With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset hotplug operation becomes synchronous. That commit also removes the code that handles race between cpuset_hotplug_work and cpu hotplug notifier with the assumption that race is now gone. Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask") updates the cpuset code to always use cpu_active_mask instead of cpu_online_mask in some places including guarantee_online_cpus() which is renamed to guarantee_active_cpus() in that commit. In the case of CPU offline operation, cpu_active_mask is updated first in sched_cpu_deactivate() to remove the offline CPU before cpuset_handle_hotplug() is called to update the effective_cpus of the affected cpusets. The cpu_online_mask is updated after that near the end of the offline operation to remove the offline CPU. As a result, the race comes back and the top cpuset may not have any active CPU leading to NULL pointer dereference during the race window when guarantee_active_cpus() is called after cpu_active_mask is updated to remove the CPU to be torn down but before cpuset_handle_hotplug() is able to properly update the effective_cpus of the top cpuset. Fix this by adding back the NULL cs check to avoid this problem.
-
CVE-2026-99048
In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production.
-
CVE-2026-99001
In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: cancel the client work on remove xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and schedules i2c->work when the adapter is registered under the xe I2C platform device, and xe_i2c_client_work() then instantiates the AMC client device on that adapter. xe_i2c_remove() tears down the AMC, unregisters the client devices, the bus notifier and the adapter platform device, but it never drains i2c->work. A work item that is still queued or running when the adapter is unregistered dereferences i2c->adapter in i2c_new_client_device() after platform_device_unregister() has released the adapter. The work item is also embedded in the devm-allocated struct xe_i2c, so a work item still queued after the drm device devm unwind frees that allocation runs its callback on freed memory. The bus notifier is the only thing that schedules this work, and it is unregistered after the client devices. An instance that is still queued when the teardown runs can therefore write i2c->client[XE_I2C_CLIENT_AMC] while the loop is unregistering and clearing the same array, and an AMC client it instantiates late is only cleaned up by the adapter's own child sweep in i2c_del_adapter(). Move bus_unregister_notifier() in front of the client teardown loop and cancel the work right after it, so no new instance can be scheduled and a queued instance is drained before the client array is touched. A running instance still finds a live adapter, since the adapter is unregistered later. (cherry picked from commit a23f27d5ec11c3f418c5e5531eea34ccda2b5b20)
-
CVE-2026-98997
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: only accept doorbell BOs as queue doorbell amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle into the doorbell domain. For a regular BO, TTM moves it with ttm_bo_move_null() and its contents are lost. Since an importer on the same device gets the exporter's GEM object, a client can do this to a buffer another client shared with it. Reject BOs that were not created in the doorbell domain. v2: drop the error message, use a local abo variable (Christian) (cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917)
-
CVE-2026-98987
In the Linux kernel, the following vulnerability has been resolved: namespace: look at the topmost mount for a mount namespace file attach_recursive_mnt() preallocates a mountpoint for the root of the topmost mount of the source so that a mount that already sits at the destination can be put on top of the source or on top of one of its propagated copies. The copies are made without CL_COPY_MNT_NS_FILE so their chain of overmounts is shorter than the source's. It ends below the first bind mount of a mount namespace file. So while the loop walks up the chain of the source it remembers the mountpoint of that mount in "shorter" and the existing mount is put there for the copies. But the loop ends at the topmost mount without ever looking at it. If the topmost mount is the only mount namespace file in the chain "shorter" stays NULL and mnt_change_mountpoint() attaches the existing mount of the copy below the root of the mount namespace file. That's a dentry of nsfs. No path walk in the copy's mount namespace ever gets there. The mount is gone until its parent goes and the copy that took its place can't be unmounted synchronously because it has a child: S bind mount of a file N bind mount of a mount namespace file on top of S A shared mount, B a slave of A, Q mounted on B/file move_mount(S, A/file) cat B/file -> the content of S instead of Q umount B/file -> EBUSY Look at every mount of the chain including the topmost one.
-
CVE-2026-98961
In the Linux kernel, the following vulnerability has been resolved: btrfs: unlock inode and extent in caller when io_uring read extent fails btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken the inode shared lock and the extent lock. On failure it used to unlock in out_fail, and a pages-array allocation failure returned -ENOMEM without unlocking at all. Unlock in the caller instead on all failure returns, matching the copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks in btrfs_uring_read_finished().
-
CVE-2026-98939
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Drop unnecessary PMD page copy when freeing On a box with a discrete GPU, lockdep reports a possible deadlock as soon as kswapd shrinks the TTM page pool. The immediate cause is an x86 commit that added an mmap_read_lock() to kernel page protection munging code. The huge vmap code holds the same lock over a GFP_KERNEL allocation, which is a no-no now that reclaim can take it. That allocation is in a page table *free* path and ends up being for dubious purposes[1]. Basically, it tries to avoid hardware setting Accessed=1 in page table entries that are unreachable by the hardware, a non-issue. Remove the PMD copy. Detach the original PMD page at the PUD, flush the mid-level caches, and free the PTE tables straight from the detached PMD page. With no allocation left, the locking issue is gone. Lockdep splat/analysis: WARNING: possible circular locking dependency detected 7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U ------------------------------------------------------ kswapd0/269 is trying to acquire lock: ((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0 but task is already holding lock: (pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm] Chain exists of: (init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem The cycle is built from three edges: 1) pool_shrink_rwsem -> (init_mm).mmap_lock The TTM shrinker restores the caching attribute of every page it frees, while holding pool_shrink_rwsem: ttm_pool_shrink() -> ttm_pool_dispose_list() -> ttm_pool_free_page() -> set_pages_wb() -> change_page_attr_set_clr() [ init_mm mmap read lock ] 2) fs_reclaim -> pool_shrink_rwsem The same shrinker, called from reclaim. 3) (init_mm).mmap_lock -> fs_reclaim ioremap() installing a huge PUD mapping over an existing PMD table: ioremap_page_range() -> vmap_range_noflush() -> vmap_try_huge_pud() [ init_mm mmap read lock ] -> pud_free_pmd_page() -> __get_free_page(GFP_KERNEL) [ enters reclaim ] [ dhansen: Lots of changelog munging/trimming and merged comments from my version of the fix. ]
-
CVE-2026-98928
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE.
-
CVE-2026-120255
InfoScan uses hard-coded cryptographic keys and initialization-vector values in its database-encryption implementation. The application uses these values to encrypt the MongoDB password before storing it in the Windows registry. Because the cryptographic material is embedded in the distributed application, an individual with access to the encrypted registry value and the application code may be able to recover the database password.
-
CVE-2026-99542
In the Linux kernel, the following vulnerability has been resolved: ksmbd: deny access for an empty DACL instead of granting the request smb_check_perm_dacl() returns the access mask it computes to the SMB2 CREATE handler, which uses it as the granted access for the open. For a security descriptor whose DACL is present but contains no ACEs, the function is supposed to deny access: an empty (non-NULL) DACL grants no access to anyone except the object owner's implicit READ_CONTROL and WRITE_DAC (MS-DTYP 2.4.5). The empty-DACL branch only denies when both - the DACL has no trailing bytes (pdacl_size == sizeof(struct smb_acl)), and - the request contains bits beyond READ_CONTROL / WRITE_DAC. In every other case it takes the shared "goto err_out" with rc still 0, which returns success without modifying *pdaccess, so the caller grants the full requested access. Three problems follow: - The READ_CONTROL / WRITE_DAC carve-out models the owner's implicit rights, but the check runs before is_owner is computed, so those rights are handed to *every* caller, not just the owner. For READ_CONTROL the SMB2 CREATE path does not fall back to inode_permission(), so any user can read the security descriptor of an object whose empty DACL is meant to deny them. - A request of exactly READ_CONTROL and/or WRITE_DAC is granted to any caller. WRITE_DAC lets the handle rewrite the DACL. - A DACL that declares zero ACEs but carries trailing bytes (pdacl_size > sizeof(struct smb_acl)) skips the deny entirely and is granted whatever was requested. On shares where the NT ACL is the authoritative access control -- e.g. "force user" shares, where every client maps to one POSIX identity so POSIX cannot distinguish users -- this is an access-control bypass. Compute is_owner before the empty-DACL branch and deny access from an empty DACL unless the caller is the owner requesting no more than READ_CONTROL / WRITE_DAC.
-
CVE-2026-124746
A flaw was found in BusyBox. An integer overflow occurs in the volume_id component when calculating buffer boundaries while probing filesystem metadata. An attacker can exploit this vulnerability by providing a specially crafted filesystem image on an attached storage device. When probed by utilities such as blkid, findfs, or mount, the application crashes, resulting in a Denial of Service (DoS) that prevents the system from resolving or mounting storage devices.
-
CVE-2026-124743
A flaw was found in BusyBox. When processing filesystem metadata, the volume identification component does not properly validate header values in HFS+ filesystems. An attacker able to attach a storage device or supply a specially crafted filesystem image can trigger an application crash, resulting in a Denial of Service (DoS) and preventing device resolution.
-
CVE-2026-99180
In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone.
-
CVE-2026-99167
In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in __tcf_action_put() __tcf_action_put() decrements the reference count before decrementing the binding count. Another thread can free the action between these operations, causing the binding-count update to access freed memory. KASAN reports it as: BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340 Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64 Hold the action IDR mutex across both counter updates and IDR removal, keeping cleanup outside the lock.
-
CVE-2026-99156
In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between st_remove() and st_open() st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put().
-
CVE-2026-99110
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX).
CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.