CVE-20XX-?
agent?

CVEs of 2026.

Every CVE published in 2026 that we hold, ranked by exploit odds.

2,501 CVEs · updated 2026-11-21 23:05 UTC

Reset all
  1. CVE-2026-99464

    In the Linux kernel, the following vulnerability has been resolved: media: redrat3: fix UAF in probe error path leaving rc device registered redrat3 stores its device name and phys path inside the main rr3 structure, and the rc device's device_name and input_phys point into rr3. When the RC device is registered, it keeps those pointers. KASAN: slab-use-after-free in string_nocheck lib/vsprintf.c:648 Read of size 1 at addr ffff888051fda758 by task udevd/7464 Call Trace: string_nocheck lib/vsprintf.c:648 [inline] string+0x216/0x2d0 lib/vsprintf.c:730 vsnprintf+0x74a/0xef0 lib/vsprintf.c:2945 vscnprintf+0x41/0x90 lib/vsprintf.c:3014 sysfs_emit+0x10e/0x180 fs/sysfs/file.c:761 input_dev_show_name+0x58/0x70 drivers/input/input.c:1282 Allocated by task 10: redrat3_dev_probe+0x477/0x2570 drivers/media/rc/redrat3.c:1023 Freed by task 10: redrat3_delete drivers/media/rc/redrat3.c:466 [inline] redrat3_dev_probe+0x1bf4/0x2570 drivers/media/rc/redrat3.c:1124 Syzkaller triggers this via usb probing. It probes the RedRat3 USB interface, which calls redrat3_dev_probe() in redrat3.c. That function allocates rr3, then builds an rc device whose name points into rr3 via redrat3_init_rc_dev() in redrat3.c, and registers it with rc_register_device(). When the detector enable fails after the RC device is registered, the probe jumps to the led_free path. That path unregisters the LED but does not unregister the RC device before freeing rr3 via redrat3_delete() in redrat3.c. The RC device still holds device_name = rr3->name which is now freed. Later udevd reads /sys/.../input device name via sysfs_emit() in file.c, which calls input_dev_show_name() in input.c, which emits dev->name which is the freed rr3->name. When the detector enable fails after the RC device is registered, the error path must not leave the RC device registered. Make the probe error path clean up the same way redrat3_dev_disconnect() does. This change should be safe because the RC device is fully registered at this point and its teardown via rc_unregister_device() is protected by the input device mutex, and rr3 is still alive during unregister so device_name remains valid until after unregister. The URBs are killed before rc_free, so no completion can run after rc is freed. No new lock ordering is introduced.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99467

    In the Linux kernel, the following vulnerability has been resolved: media: marvell: mcam: stop DMA and cancel s_bh_work before freeing DMA buffers In vmalloc mode the frame-completion IRQ queues mcam_frame_work() on cam->s_bh_work, which memcpy()s from the dma_bufs[] that mcam_free_dma_bufs() frees with dma_free_coherent(). mccic_shutdown() frees those buffers without stopping the controller, so while streaming a late frame IRQ can re-arm the work after the buffers are gone, causing a use-after-free. Stop the controller in mccic_shutdown() when streaming is still active (gated on an open fd, which holds a runtime-PM reference, so the device is powered), cancel s_bh_work in mcam_free_dma_bufs(), and move INIT_WORK() into mccic_register() before the device can be published.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99455

    In the Linux kernel, the following vulnerability has been resolved: serial: core: shut down initialized port on removal When a serial port configured as a console is opened and subsequently closed, tty_port_shutdown() skips invoking port->ops->shutdown() because port->console is true. As a result, tty_port_initialized() remains true and the port's interrupt handler stays registered in the irq subsystem. If the underlying device is later unbound or removed (e.g. via sysfs driver unbind or device hot-unplug), serial_core_remove_one_port() unregisters the console, frees uport->name via kfree(), and tears down the port without shutting it down or freeing its IRQ. Consequently, the irqaction descriptor remains registered in genirq with action->name pointing to freed memory. This triggers a use-after-free read whenever genirq accesses action->name, such as when reading /proc/interrupts: BUG: KASAN: slab-use-after-free in string+0x476/0x570 Call Trace: string+0x476/0x570 vsnprintf+0x422/0x1300 seq_printf+0x... show_interrupts+... Fix this by acquiring port->mutex in serial_core_remove_one_port() after console unregistration, clearing port->console under the mutex to prevent data races with concurrent tty_port_shutdown(), and invoking uart_shutdown(NULL, state) if the port remains initialized. This ensures that port->ops->shutdown() is called and the IRQ is freed before kfree(uport->name).

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-99456

    In the Linux kernel, the following vulnerability has been resolved: scsi: dc395x: sync the waiting_timer before freeing the host The waiting_timer callback re-arms itself and takes the host lock. adapter_uninit() currently stops it with timer_delete(), which does not wait for a callback already running on another CPU. The final scsi_host_put() that frees the host (and the host lock the callback dereferences) runs right after adapter_uninit(), so a concurrent or just re-armed callback can fire after the free, leaving a potential use-after-free window. Replace timer_delete() with timer_shutdown_sync() at the top of adapter_uninit(), before the host-lock section: the timer is dequeued, a running callback is waited for and rearming is blocked before the chip is halted, so it cannot fire at all once the adapter has ceased to function. Waiting outside the lock avoids the self-deadlock that would result from syncing a callback blocked on the lock we still hold. No shutdown is needed for selto_timer because it has no reachable armer or callback. This issue was found by an in-house static analysis tool.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-99285

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_byteorder: remove multi-register support 64bit byteorder conversion is broken when several registers need to be converted because the source register array advances in steps for 4 bytes instead of 8: for (i = ... src64 = nft_reg_load64(&src[i]); ~~~~~ u32 *src nft_reg_store64(&dst64[i], Remove the multi-register support, it has other issues as well: Pablo points out that commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") alters semantics: before the loop operated on registers, i.e. for ( ... ) dst32[i] = htons((u16)src32[i]) .. but after the patch it will operate on bytes, which makes this useless to convert e.g. concatenations, which store each compound in its own register. Multi-convert of u32 has one theoretical application: ct mark . meta mark . tcp dport @intervalset Because ct mark and meta mark are host byte order, use with intervals has to convert the byteorder for ct/meta mark value to network byte order (bigendian). nftables emits this: [ meta load mark => reg 1 ] [ byteorder reg 1 = hton(reg 1, 4, 4) ] [ ct load mark => reg 9 ] [ byteorder reg 9 = hton(reg 9, 4, 4) ] ... I.e. two separate calls. Theoretically it could be changed to do: [ meta load mark => reg 1 ] [ ct load mark => reg 9 ] [ byteorder reg 1 = htonl(reg 1, 4, 8) ] ... But then all it would take to change the set to meta mark . tcp dport . ct mark ... and we'd be back to two "byteorder" calls. IOW, support to convert a range of registers is both dysfunctional and dubious. Simplify this: remove the feature. Pablo Neira Ayuso points out that nftables before 1.1.0 can generate incorrect byteorder conversions, see 9fe58952c45a, "evaluate: skip byteorder conversion for selector smaller than 2 bytes" in nftables.git). Affected rulesets fail to load with this change and old userspace due to 'len != size' check.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-51831

    An issue in IDrive IDrive Backup for Windows Version 7.0.1.1 and below affected, remediated in Version 7.0.1.2 allows a local attacker to execute arbitrary code via the id_service.exe component

    Injection OS & kernel

    7.8 HIGH 0.2% exploit odds Fix listed
  7. CVE-2026-51832

    An issue in IDrive IDrive Backup for Windows Version 7.0.1.1 and below affected, remediated in Version 7.0.1.2 allows a local attacker to execute arbitrary code via the id_service.exe component

    Injection OS & kernel

    7.8 HIGH 0.2% exploit odds Fix listed
  8. CVE-2026-99146

    In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-99116

    In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone.

    Memory safety OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  10. CVE-2026-99105

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-99091

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-99062

    In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99069

    In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99055

    In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DMABUF and IOURING net_iov types while leaving page-backed checks unchanged. With the guard, the same queue copied the readable prefix, returned a 4096-byte skip hint, and completed without a fault.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99060

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured the third request over the air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer also completed without a reset.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99044

    In the Linux kernel, the following vulnerability has been resolved: ice: fix use-after-free in dynamic port cleanup ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic port from pf->dyn_ports. However, it frees the VSI before reading the index for the erase, resulting in a use-after-free. Follow the reverse of the allocation order in ice_alloc_dynamic_port() by erasing the xarray entry before freeing the VSI.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-99021

    In the Linux kernel, the following vulnerability has been resolved: regulator: of: fill in supply names in of_regulator_bulk_get_all() of_regulator_bulk_get_all() returns an array it allocated itself, and fills in only the consumer of each entry. Every other way of getting a bulk array has the supply name set, because the caller provides it, and the core expects it to be there: regulator_bulk_enable() prints it when a supply fails to enable, so a caller that hands such an array to it dereferences uninitialised memory on that path. Copy each name into the array's own allocation, right behind the entries, so that it shares the array's lifetime and callers still have nothing extra to free. That also retires the fixed 64 byte stack buffer the names were assembled in, which is_supply_name() never bounded the copy against.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99028

    In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop In the dmaengine path the driver pre-submits RX buffers and holds in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync() aborts these descriptors without running their callbacks, and the driver then frees only the ring shells, leaking every SKB still owned by the engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted per channel, the mapping leak can eventually exhaust a limited IOMMU aperture. Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a slot that still owns a live, DMA-mapped buffer, and on stop unmap and free every such buffer. axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on each completion, so it can race axienet_stop(): a completion may submit a fresh buffer after dmaengine_terminate_sync() has returned, leaving the channel armed with a buffer the teardown then frees while the engine may still write into it (dma_release_channel() does not stop it either). Add a lock that axienet_dma_rx_cb() holds across the @stopping check and the resubmit, and axienet_stop() holds to set @stopping before terminating. Once @stopping is set no callback can arm a new buffer, and any armed just before is aborted by the terminate, so teardown only frees buffers the engine no longer owns.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99029

    In the Linux kernel, the following vulnerability has been resolved: net: sparx5: free the matchall entry on destroy sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for every offloaded matchall filter and adds it to sparx5->mall_entries. sparx5_tc_matchall_destroy() removes the entry from the list, but never frees it, so the entry of every deleted mirror and goto matchall filter is leaked. Free the entry after unlinking it. The leak was discovered by an AI code review agent, and reproduced with kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and deleting matchall mirror and goto filters. With the fix, kmemleak no longer reports the leak.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99020

    In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99003

    In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate userspace queue count against initialized firmware slot count In panthor_drv.c:panthor_ioctl_group_create(), the queue count is validated against the hardcoded maximum: if (!args->queues.count || args->queues.count > MAX_CS_PER_CSG) return -EINVAL; However, if the firmware reports fewer slots than MAX_CS_PER_CSG, panthor_fw_init_ifaces() will only initialize that smaller number of stream interfaces. If unprivileged userspace requests more queues than the firmware reported (but no more than MAX_CS_PER_CSG), cs_slot_prog_locked() fetches an uninitialized stream interface and may crash when dereferencing cs_iface->input->ringbuf_base.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99004

    In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Size page table preallocation by device address Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for map() interface") passed the device address to pvr_mmu_op_context_create(), but the preallocation is still sized from device_addr + sgt_offset with an exclusive end. The offset into the object's pages has no place in a device-virtual range, and the exclusive end allocates one table too many when the range ends on a table boundary. Count the tables from device_addr and the inclusive end of the range. The new calculation does not take page table indices into account. This fixes another issue with the previous implementation, where the difference between start and end indices could underflow when a mapping crossed a page table boundary. This would lead to the driver preallocating a huge number of MMU pages, exhausting system memory and triggering an out of memory panic. [Alessio: add paragraph to point out OOM bug being fixed, cc stable]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-98996

    In the Linux kernel, the following vulnerability has been resolved: fs: don't silently unmount busy mounts The propagate_mount_busy() helper exists to decide whether a synchronous can suceed. It does that by looking at the copies of the victims in the mounts its parent propagates to. One of those functions from propagation hell. It skips a copy that has child mounts except for the case of a single child mount covering the copy's root. That algorithm used to be exact. It isn't anymore. Originally only childless copies were unmounted during propagation. And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") ended up adding covered mounts to both sides in one go. Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts in any order") and that started to unmount more than before: [1]: A copy of a mount is unmounted when each of its children is either its overmount or a copy of the victim itself. In the former case the overmount gets reparented. In the latter case the copy of the victim will end up being unmounted. So propagate_umount() ended up being rewritten without adjusting propagate_mount_busy(). And currently propagate_mount_busy() doesn't look at copies of the victim that have two or more children nor a single child that is not the overmount. So any such copy in [1] is not checked for references. The result is that a synchronous unmount succeeds, pulling out a mount that is still in use. A container can run into this with its own mounts. The host shares a tree with the container and the host has a mount in that tree: mount -t tmpfs none /mnt mount --make-shared /mnt mount -t tmpfs none /mnt/a The container's /mnt is a slave copy of the host mount. The container now takes a detached copy of the tree and mounts that copy beneath its propagated copy of /mnt/a and keeps the file descriptor to the tree open: unshare -m --propagation unchanged mount --make-rslave / fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE) move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH) grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 777 775 ... /mnt/a ... master:646 776 777 ... /mnt/a ... master:647 778 777 ... /mnt/a/a ... master:647 The now attached tree (777) is now mounted beneath the container's copy of /mnt/a. That's also where the host mount sits (as seen from the host mount namespace). So the propagated copy (776) of the host's mount is on top of its root and the copy of that (778) is inside it. Now the host runs: umount /mnt/a and it succeeds. The moved tree tree and the copy inside of it are gone from the container. Now only the propagated copy is left and it got reparented to where it was before: grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 776 775 ... /mnt/a ... But the file descriptor still refers to the moved tree. So a synchronous umount detached a mount that is still in use. Teach propagate_mount_busy() the same checks that propagate_umount() does. It now checks for a single victim mount without children for which it can assume that MNT_LOCKED is cleared on every copy like propagate_umount() does. The copies form chains. IOW, when a copy itself receives propagation from the victim's parent then the mount at the same mountpoint inside that copy is a copy as well. Whether a mount receives propagation from the victim's can simply be checked by walking its masters. Walk each chain once from its top so we are sure that nested copies stay linear. Check every reference once of every copy that gets unmounted.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-98989

    In the Linux kernel, the following vulnerability has been resolved: namespace: check a recursive bind mount for mount namespace loops do_loopback() refuses to bind mount the file of a mount namespace that is as old as the caller's or older because a mount namespace that holds a mount of its own file, or of an ancestor's, would cause a cycle. But it only checks the dentry the bind mount starts from. With MS_REC everything below it is copied and do_loopback() passes CL_COPY_MNT_NS_FILE so mount namespace files below the source are copied. That's fine for a source in the caller's own mount namespace. Every mount namespace file in there passed the same check when it was bind-mounted. It isn't fine for a source in another mount namespace. may_copy_tree() accepts a bind mount of any nsfs or pidfs file no matter what mount namespace it lives in so that /proc/<pid>/ns/<ns> and pidfds can be bind mounted. If we create a bind-mount stack of mount namespaces file descriptors the kernel will copy them irrespective of their ancestoral relationship to the mount namespace in question: 151 146 0:7 net:[4026531833] /tmp/nrc/y rw - nsfs nsfs rw 152 151 0:7 mnt:[4026532293] /tmp/nrc/y rw - nsfs nsfs rw Mount 152 is a mount of the mount namespace file of mount namespace 4026532293 inside mount namespace 4026532293. That namespace and every mount in it are leaked... All it takes is a process in an older mount namespace that stacks the file and repeating it leaks without limit: after control: Shmem: 380 kB child: mount(/proc/self/fd/6, MS_BIND|MS_REC): ok after cycle: Shmem: 65916 kB do_move_mount() runs check_for_nsfs_mounts() over a detached tree for exactly that reason. Do the same for the copy before it is grafted.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-98949

    In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix reference and vm_bo handling in remap() When a map overlaps part of an existing mapping, pvr_vm_gpuva_remap() splits the mapping into prev/next parts covering what the request did not take, instead of creating something new. It gets two things wrong. - A GEM reference is taken for each part but it's never needed and never dropped, so it leaks one reference per split (remap-next-in-2m in tests/imagination/pvr_vm_map.c): CRITICAL: 33558528 bytes of shmem still held after close - The parts still belong to the original object being split, but pvr_vm_gpuva_remap() links them to ctx->gpuvm_bo, the new object's vm_bo: prev_va --obj--> BO_A BO_B <--obj-- vm_bo (ctx->gpuvm_bo) \___________link___________/ (mismatch: BO_A != BO_B) drm_gpuva_link() catches the mismatch: WARNING: drivers/gpu/drm/drm_gpuvm.c:2108 at drm_gpuva_link+0x2ec/0x310 drm_WARN_ON(obj != vm_bo->obj) Call trace: drm_gpuva_link pvr_vm_gpuva_remap __drm_gpuvm_sm_map pvr_vm_map pvr_ioctl_vm_map Link them to op->remap.unmap->va->vm_bo instead. The locking of the GPUVA lists of the other objects touched by a split is not addressed here; it is handled by switching the GPUVM to immediate mode.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-98947

    In the Linux kernel, the following vulnerability has been resolved: vsock: Fix memory leak in vmci_transport_recv_dgram_cb() During the closure of a datagram socket, the vmci_transport_recv_dgram_cb() function may be called, which will add the packets to the socket's backlog; then, after the receive queue is cleared, the __release_sock() function will move the packet back from the socket's backlog to the receive queue, which will lead to a memory leak. sock_close __sock_release __vsock_release // take ownership by user-space lock_sock_nested sock_set_flag(sk, SOCK_DEAD) vmci_transport_release vmci_dispatch_dgs vmci_datagram_invoke_guest_handler vmci_transport_recv_dgram_cb sk_receive_skb if (!sock_owned_by_user(sk)) [...] (!) else if sk_add_backlog() [...] (!) skb_queue_purge(&sk->sk_receive_queue) release_sock __release_sock // move all packets from the backlog // to the receive queue (!) sk_backlog_rcv vsock_queue_rcv_skb [...] __sock_queue_rcv_skb if (!sock_flag(sk, SOCK_DEAD)) // Since the socket is "dead", the function will not // be called sk->sk_data_ready(sk) sock_release_ownership(sk); sock_put Add a receive queue cleanup in the socket destructor to fix this. syzkaller report: unreferenced object 0xffff8880117bfb80 (size 240): comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s) hex dump (first 32 bytes): 78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&..... 00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&..... backtrace: [<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505 [<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport] [<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci] [<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci] [<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci] [<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205 [<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314 [<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376 [<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295 Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-98948

    In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_flower: Fix port range register leak in tmplt_create() mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template into a stack-local struct mlxsw_sp_acl_rule_info purely to compute rulei.values.elusage. Parsing can acquire port range registers via mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes through mlxsw_sp_acl_rulei_destroy(), those registers were never released, including through chain template deletion. Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually release the necessary resources and call from mlxsw_sp_flower_tmplt_create() to plug the leak. The issue was found during a review of Wentao Liang's patch referenced below.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-98920

    In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook at allocation and free time respectively, as reported when reading files on a CIFS mount. The allocations are also missing from /proc/allocinfo. Wrap the direct ->alloc() invocations in alloc_hooks() with a new mempool_alloc_noreserve() helper in include/linux/mempool.h, next to the other alloc_hooks()-wrapped macros such as mempool_alloc(). The GFP_KERNEL paths keep their failable allocation semantics, they just get tagged now.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-98923

    In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/mem with PROT_NONE and then reading that process's /proc/<pid>/cmdline triggers a spurious WARN in ioremap_prot() through generic_access_phys(): WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys Call trace: generic_access_phys+0x1c8/0x228 (P) __access_remote_vm+0x2b4/0x398 access_remote_vm+0x14/0x30 get_mm_cmdline+0xf8/0x2a0 proc_pid_cmdline_read+0x68/0x120 generic_access_phys() passes the protection derived from the user PTE to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a present-invalid PTE, so pte_present() still returns true and the protection reaches ioremap_prot(). A PROT_NONE mapping does not have PTE_USER, causing the existing WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid user mapping. Execute-only mappings have the same issue and must not be readable through this path either. ioremap_prot() should therefore reject protection values without PTE_USER without warning. This makes the access fail cleanly for PROT_NONE and execute-only mappings while retaining the existing user-protection contract.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-98871

    In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99703

    In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix mremap deadlock when PMD sharing is possible move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for write while moving hugetlb PTEs. This prevents races with truncation and protects huge_pmd_unshare(), but the move loop must not call helpers that can acquire the same rwsem for read. huge_pte_alloc() can do that when the destination can use PMD sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for read while searching for a shareable PMD table. Calling it while the move path already holds i_mmap_rwsem for write can deadlock. Avoid that path for PMD-sized hugetlb mappings that can use PMD sharing. Instead of allocating or sharing the destination page table while moving, zap the source range and let the destination fault path populate or share the PMD lazily. Reuse the hugetlb unmap logic for the source-side zap by splitting the core loop out of __unmap_hugepage_range(). The wrapper keeps the existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush() behavior, while move_hugetlb_page_tables() can reuse the unmap loop with its existing mmu_gather.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99705

    In the Linux kernel, the following vulnerability has been resolved: mm: memory: fix truncation removing mapped folios Ayush reported an issue that shmem/tmpfs folios are still mapped when truncating them on production: " BUG: Bad page cache in process ... pfn:... page dumped because: still mapped when deleted " I reproduced the issue with Ayush's reproducer [1] with the latest mm-unstable branch, and I got the following crash info. From the dump message, we can see that truncate_inode_folio() is really trying to remove mapped folios, which is incorrect. " [ 189.171977] page: refcount:3 mapcount:1 mapping:00000000fe168ee1 index:0x3880 pfn:0x191647 [ 189.171995] memcg:ffff0000cc073d40 [ 189.171997] aops:shmem_aops ino:3c01 dentry name(?):"memfd:runsc-memory" [ 189.172006] flags: 0x17fffef0002022d(locked|referenced|uptodate|lru| workingset|swapbacked|node=0|zone=2|lastcpupid=0x3ffff) ....... [ 189.172017] page dumped because: VM_BUG_ON_FOLIO(folio_mapped(folio)) [ 189.172026] ------------[ cut here ]------------ [ 189.172027] kernel BUG at mm/filemap.c:155! [ 189.172057] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ....... [ 189.177721] CPU: 3 UID: 0 PID: 5521 Comm: repro Kdump: loaded Tainted: 7.3.0-rc4+ #277 PREEMPT(lazy) ....... [ 189.183986] Call trace: [ 189.184124] filemap_unaccount_folio+0xf0/0x1e8 (P) [ 189.184391] __filemap_remove_folio+0x34/0x160 [ 189.184633] filemap_remove_folio+0x4c/0xb0 [ 189.184859] truncate_inode_folio+0x34/0x58 [ 189.185087] shmem_undo_range+0x220/0x658 [ 189.185308] shmem_fallocate+0x2f0/0x470 [ 189.185527] vfs_fallocate+0x128/0x328 ...... [ 189.187078] el0t_64_sync+0x184/0x188 " After analysis, I believe the race exists between truncation and MADV_DONTNEED, and shmem's ->map_pages() merely makes the issue easier to reproduce. Since MADV_DONTNEED synchronously releases the pagetable page before calling tlb_flush_rmaps(), this could cause another thread's truncation to skip zap_pte_range() (due to pmd is none) but still observe the folio's mapcount as non-zero. A possible race scenario is as follows: CPU 0 CPU 1 shmem_fallocate madvise_dontneed_single_vma unmap_mapping_range ....... ...... (filemap_map_pages() remap folios) zap_pte_range truncate_inode_folio zap_empty_pte_table(pmd clear) unmap_mapping_folio ...... zap_pmd_range (saw pmd none, skip) filemap_remove_folio BUG_ON(folio_mapped) tlb_flush_rmaps(remove rmaps) To fix this issue, we should move the pmd clear operation (via zap_empty_pte_table()) to after tlb_flush_rmaps() and use sync_with_folio_pmd_zap() to sync with concurrent zapping, so that when we find a pmd_none() while unmapping a folio without holding the PTL, the folio's mappings are guaranteed to have been removed via tlb_flush_rmaps(). Meanwhile move the second pmd_none() check to where it belongs: if splitting zapped the PMD.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99682

    In the Linux kernel, the following vulnerability has been resolved: virtio_blk: use synchronous quiesce in virtblk_freeze_priv() blk_mq_run_work_fn() can call blk_mq_sched_dispatch_requests() through blk_mq_run_dispatch_ops(). The dispatcher checks QUEUE_FLAG_QUIESCED while the flag is clear. It can then be preempted before it gets a request. At that time, it has no queue usage reference, so blk_mq_freeze_queue() does not wait for it. virtblk_freeze_priv() then calls blk_mq_quiesce_queue_nowait() and blk_mq_unfreeze_queue(). A new request can enter the queue. The old dispatcher can run again, use its old flag check, get the new request, and call virtio_queue_rq(). At the same time, virtblk_freeze_priv() can reset the device, delete the virtqueues, and free vblk->vqs. The old dispatcher can then use a deleted virtqueue or a NULL vblk->vqs, and the kernel can crash. Fix this by using blk_mq_quiesce_queue(), which waits for dispatch code that was already running. Keep the existing freeze and unfreeze order. The queue remains quiesced until virtblk_restore_priv() calls blk_mq_unquiesce_queue().

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99667

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp() try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the page table, and takes the PMD lock and the PTE lock to remove it. In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the page table. The pmd_same() check is supposed to handle this, but it is only done with CONFIG_SPLIT_PTE_PTLOCKS. Fix it by performing the check unconditionally. Fix generated by an LLM and sent by Josef Bacik in private. [ david: adjust description ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99644

    In the Linux kernel, the following vulnerability has been resolved: mm/memory-tiers: unregister empty tiers outside memory_tier_lock When offlining a node's last memory empties its tier, clear_node_memory_tier() calls device_unregister() while holding memory_tier_lock. A concurrent sysfs read can hold a kernfs active reference and block in nodelist_show() on that mutex. device_unregister() then waits in kernfs_drain() for the read to finish and release its active reference, while the reader waits for the offlining task to release the mutex. Return the node's former tier from clear_node_memory_tier(), making the helper more similar to set_node_memory_tier(), which also returns a memory_tier pointer. Let the caller unlink an empty tier under memory_tier_lock before rebuilding demotion targets, then unregister its device after dropping the lock.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99632

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99636

    In the Linux kernel, the following vulnerability has been resolved: net: reject a negative TCP header offset in qdisc_pkt_len_segs_init() qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner offset, in the unsigned hdr_len. A header in front of skb->data gives a negative offset. For an offset a little below zero, pskb_may_pull() gets a small length and succeeds. Then a 64-bit kernel reads the TCP header far after the skb and can crash. Further below zero pskb_may_pull() fails. Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during tunnel decapsulation") fixed one source of such offsets. Other code that removes bytes from the front of a packet can leave the same stale header. Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch. SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after the skb today get a new result. Then __dev_queue_xmit() drops them and returns -EINVAL, but sch_handle_ingress() ignores the result. Their content can be valid. Thus the code that leaves the header stale needs its own fix.

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99584

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99567

    In the Linux kernel, the following vulnerability has been resolved: assoc_array: don't chain a new shortcut onto an existing one When a full node's leaves and the new key all share the node's segment, assoc_array_insert_into_terminal_node() replaces the node with a shortcut to a pair of new nodes. If the node is itself the target of a shortcut, the new shortcut is installed as that shortcut's next node, and a shortcut leading to a shortcut is something nothing expects: assoc_array_walk() indexes the second one as a node, and assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts nr_leaves_on_branch, on that same insertion. Deletion gets a node there. When the subtree below a shortcut shrinks enough, assoc_array_delete() collapses it into one node below the shortcut, and the leaves it collects can all share that node's segment. The next key that shares it too takes this path. Eighteen insertions and a deletion are enough: sixteen keys that agree on bits 0-11, one that leaves them at bit 8 and is deleted again, and one more that agrees with the sixteen. Have the new shortcut replace the one in front of the node as well. assoc_array_insert_shortcut() gives it that shortcut's back pointer and parent slot, so the caller installs it where that one was, and excises the old shortcut along with the node, which takes a second entry in excised_meta[]. The new shortcut's index key comes from the new key up to the new skip level, so it covers what the old one did. Found by a userspace test doing random insertions and deletions on keys that share long prefixes; a targeted case builds a shortcut, deletes down to the collapse and inserts one more key.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99530

    In the Linux kernel, the following vulnerability has been resolved: cgroup: serialize migrations of newly forked processes With favordynmods enabled, a cgroup.procs migration takes the target threadgroup's cgroup_threadgroup_rwsem for writing. A process fork holds the forking threadgroup's semaphore for reading. These are different semaphores when fork creates a new process. copy_process() publishes the child's PID before cgroup_post_fork() links the child to its css_set. A writer can find the child in that interval, take its uncontended semaphore, and migrate it while child->cgroups still points to init_css_set and child->cg_list is empty. Migration links the node into init_css_set.mg_tasks. cgroup_post_fork() then adds the same node to the intended css_set as though it were unlinked, corrupting both task lists and their css_set ownership. This regresses the fork/migration race fixed by commit b12b533fa523 ("cgroups: add lock for child->cgroups in cgroup_post_fork()") and restored again in 2012 after the lock had been removed. The old task_lock protection was later superseded by global css_set and cgroup threadgroup locking. The change identified by the Fixes tag narrowed only the migration side back to a per-threadgroup lock, recreating the different-process exclusion failure. Take the new threadgroup's semaphore for reading before the child becomes visible and hold it through cgroup_post_fork(). Use a nested lock subclass because fork already holds the parent's semaphore. CLONE_THREAD children share the parent's signal_struct and remain covered by the existing lock. Migrations of unrelated, fully initialized threadgroups remain concurrent. An AI coding assistant was used to identify and reproduce the regression and to develop and test this fix.

    Other OS & kernel Linux

    unscored 0.2% exploit odds Fix listed
  41. CVE-2026-99517

    In the Linux kernel, the following vulnerability has been resolved: nvmet: fix use-after-free of the old registrant in nvmet_pr_preempt() nvmet_pr_preempt() handles a preempt sent by the reservation holder by changing the reservation type with nvmet_pr_update_reg_attr(), unless the reservation is of an All Registrants type. For the holder that helper does not modify the registrant in place: it puts a copy on the registrant list, points pr->holder to the copy and passes the old registrant to kfree_rcu(). If the reservation type changed, nvmet_pr_preempt() then hands &reg->hostid of that old registrant to nvmet_pr_resv_released(). Unless the reservation released notification is masked, that function takes subsys->lock and compares the host id against every controller of the subsystem. The caller only holds pr->pr_sem and is not in an RCU read-side critical section, so nothing keeps the old registrant alive while it is read. The result is a read of 16 freed bytes that decides which controllers get the notification. Found by code inspection. kfree_rcu() defers the free, so it usually happens after the read; when the pending free is forced to run before the read, KASAN reports the host id as freed memory. Pass the host id of the controller that sent the command instead. The registrant was looked up by that host id, and the controller outlives the request.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-120749

    A flaw was found in D-Bus. With a privileged Monitoring client attached (for example dbus-monitor or busctl monitor), an unprivileged local user can cause dbus-daemon to abort if a driver-originated broadcast such as NameOwnerChanged or ActivatableServicesChanged cannot be delivered to a recipient (for example due to a deny rule or an exceeded outgoing message queue). Driver broadcasts still use serial 0; when delivery fails, composing the monitor error reply asserts reply_serial != 0 and aborts the daemon.

    Denial of service OS & kernel

    6.2 MEDIUM 0.2% exploit odds No fix listed
  43. CVE-2026-99251

    In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Avoid infinite retry loop in init_vp_index() There is a retry loop in init_vp_index() where the CPUs from a certain node are stripped out if they have already been in the allocated cpumask or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no CPU left, the allocated cpumask is ignored and the process is retried again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns out not to contain any CPU in that particular node, that will become an infinite retry loop. This particular problem was reported by sashiko [1]. This should rarely happen, but we still need to guard against this. Fix this infinite loop problem by also skipping NUMA node that has no housekeeping CPU in the inner while loop of init_vp_index(). Also update the early abort check to check for the absence of online housekeeping CPUs instead of just the emptiness of the cpumask. As the outer for loop will only be reached if the housekeeping cpumask has at least one online CPU, a NUMA node with housekeeping CPUs will eventually be found.

    Denial of service OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-115805

    Improper handling of local filesystem paths in Rapid7 Insight Agent on Linux and macOS may allow authenticated local users to gain elevated privileges. Exploitation requires existing local access and depends on the Agent's inventory collection processing the crafted path.

    Injection OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed
  45. CVE-2026-99183

    In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when looking up a scheduler sched_to_core() walks rdev->cores[] up to rdev->num_cores, and rocket_remove() decrements num_cores for every core it removes. Unbind a core that is not the last one and the cores behind it fall outside the search, so sched_to_core() returns NULL for a core that is still bound and still running jobs. Neither caller checks the result: rocket_job_run(): rocket_fence_create(core), core->dev rocket_job_timedout(): dev_err(core->dev, "NPU job timed out") Unbinding the middle core of the three on an RK3588 while three clients are submitting to all of them faults twice, once from the surviving core's job queue and once from its reset work: KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched] pc : rocket_job_run+0x234/0x838 [rocket] Call trace: rocket_job_run+0x234/0x838 [rocket] drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched] process_one_work+0x640/0x14f0 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched] pc : rocket_job_timedout+0xf0/0x1e0 [rocket] Call trace: rocket_job_timedout+0xf0/0x1e0 [rocket] drm_sched_job_timedout+0x188/0x6a0 [gpu_sched] Both are the third core: the workqueue names are its device and its core->index, and it was left at slot 2 while num_cores had dropped to 2. Search all the slots that were allocated, the way find_core_for_dev() now does. A core that is still bound is then found, and the two callers get the pointer they already assume they have. This does not make unbinding one core out of several safe. An open client keeps an entity pointing at the scheduler of the core that went away: drm_sched reports it as not ready for every job that lands on it, and the client waits in dma_fence_default_wait for a fence that will never signal. Stopping the NULL dereference is what belongs in a fix; the rest wants more thought.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99184

    In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when a core is removed rocket_remove() decrements rdev->num_cores for each core it removes, while find_core_for_dev() searches slots 0 to num_cores - 1. Unbinding the cores in the order they were bound therefore loses the last one: by the time it is removed the search range has already shrunk past its slot, so find_core_for_dev() returns -1 and rocket_remove() gives up without doing anything. num_cores never reaches zero, rocket_device_fini() never runs, and the file-scoped rdev keeps pointing at a device that is going away. Binding the cores again starts from that stale count, because rocket_probe() takes rdev->num_cores as the slot to fill. On an RK3588, which describes three cores, the second round lands on slots 1, 2 and 3 while rdev->cores was allocated with room for three: rocket fdab0000.npu: Rockchip NPU core 1 version: 1179210309 rocket fdac0000.npu: Rockchip NPU core 2 version: 1179210309 rocket fdad0000.npu: Rockchip NPU core 3 version: 1179210309 The write to rdev->cores[3] is past the end of the array. Nothing in tree reads the core array often enough to notice, so the overrun is silent today. It turned up while testing a devfreq series on top of this, where a worker walks every core a few times a second, and UBSAN caught the first bool it read out of the overrun entry: UBSAN: invalid-load in drivers/accel/rocket/rocket_devfreq.c:47:10 load of value 5 is not a valid value for type '_Bool' Workqueue: devfreq_wq devfreq_monitor Record how many slots were allocated and search all of them. Every core is then found on removal, num_cores reaches zero, the device is torn down and a later bind starts from a clean rdev. This does not make unbinding a single core out of several work. probe still takes num_cores as the slot to fill, so rebinding one core while its siblings stay bound would write over a slot that is already in use, and rocket_open() still reaches for cores[0] whether or not anything is there. Both of those want more thought than a fix should carry. Found by unbinding and rebinding all three cores on an Orange Pi 5 Plus. With this applied, 25 unbind/rebind rounds and 5 module unload/reload rounds run clean there: the cores land in slots 0, 1 and 2 every time, whichever order they are bound in, and the shared supply goes back to a single user after each round.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99137

    In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_file() returns null, cifs_file_flush will return 0 without issuing set_file_size, and the outer 'if (!rc)' block will set i_size to 0 before telling the server to truncate. If the cifs_open() then fails, the inode will have size 0, while the server file is unchanged. Move the netfs_resize_file() and cifs_setsize() into the 'if (cfile)', so they only run after a successful set_file_size. In the no-handle else branch, evict stale pages with truncate_inode_pages before the O_TRUNC open to dispose of old cache pages, and let the open response set the i_size.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99111

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix data corruption with concurrent writes and O_TRUNC cifs_do_truncate() flushes dirty pages with filemap_write_and_wait() and truncates the file on the server, but in the old code both operations ran without holding i_rwsem or invalidate_lock. A concurrent buffered write via netfs_perform_write() -- which only needs i_rwsem shared -- could dirty new pages after the flush but before the local truncation, and those pages would be silently discarded by cifs_setsize() -> truncate_pagecache(). Fix by acquiring inode_lock (exclusive i_rwsem) and filemap_invalidate_lock at the top of cifs_do_truncate(), so the entire flush-truncate-resize sequence is atomic with respect to: - buffered writes (blocked by exclusive i_rwsem, since netfs_start_io_write takes i_rwsem shared), - read page faults (blocked by exclusive invalidate_lock, since filemap_fault takes it shared), - writeback collection (blocked by netfs_wb_begin/netfs_wb_end around the server truncate and local resize, since netfs_writepages also acquires the wb lock).

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99112

    In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask pointer after nla_next() fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates with an nla_len taken from those bytes, reading well beyond the mask attribute (KASAN: slab-out-of-bounds read in __nla_validate_parse from fl_change()). Validate the advanced mask pointer as well: when the mask is not legitimately exhausted (msk_depth != 0) and the new pointer fails nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask still skips the check, preserving exact-match behaviour for the remaining key attributes.

    Other OS & kernel

    7.1 HIGH 0.2% exploit odds No fix listed
  50. CVE-2026-99068

    In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix memory leakage when clearing DAO input mappers Commit e576e7843c0d ("ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions") centralized the DAO input mapper clearing logic in dao_clear_input(), but omitted the kfree() calls. It removes the mapper entries from the list and sets their pointers to NULL without freeing the allocated array. This leaks memory each time dao_clear_input() is called. Store the base pointer of the allocation before clearing the mapper entries and free the array after removing entries from the list.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed

CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.