CVEs of 2026.
Every CVE published in 2026 that we hold, ranked by exploit odds.
-
CVE-2026-119055
CWE- 416: Use After Free vulnerability exists that could cause arbitrary code execution when a local attacker could trick the end user to open a specially crafted malicious SSD file.
-
CVE-2026-118785
Improper handling of non-secure-world input in NSC veneer functions of NXP MCUXpresso SDK TrustZone-M examples (trustzone_examples), affecting versions through 26.06.00-lts and 26.09.00-pvw2, may allow a non-secure caller to supply unvalidated pointers or untrusted data, causing a timing side-channel, TOCTOU condition, or format-string misuse, potentially resulting in secure-world memory disclosure or denial of service. All software versions starting from 26.06.01-lts and 26.09.00 have fixed this issue.
-
CVE-2026-112660
An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. An app may be able to bypass certain Privacy preferences.
-
CVE-2026-124038
An uncontrolled XML entity expansion vulnerability in the Flock Installer app for Android before version 2.35.0 allows an attacker who has a valid technician account and controls or impersonates the camera being set up to crash the app, on devices running Android 10, 11 or 12, by returning a camera configuration response that contains nested XML entity declarations. The vulnerability does not allow the attacker to read or change data on the device, and no customer license plate, video or location data is exposed. Android 13 and later reject the response. The issue is fixed in version 2.35.0; update to 2.35.0 or later.
-
CVE-2026-123996
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains a missing authentication vulnerability in the UPnP/DLNA RenderingControl service on TCP port 38400 that allows a LAN-adjacent attacker to issue SetVolume, SetMute, and SelectPreset(FactoryDefaults) commands after a one-time DLNA pairing with no per-command authentication or session token. Attackers can send a continuous loop of unauthenticated commands to override the physical remote, change volume and mute, and reset all picture and audio calibration settings.
-
CVE-2026-20566
In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: MOLY01923663 / ALPS11315955; Issue ID: MSV-10866.
-
CVE-2025-53697
Use of default credentials vulnerability in Johnson Controls iSTAR Ultra, Johnson Controls iSTAR Ultra SE, Johnson Controls iSTAR Ultra G2, Johnson Controls iSTAR Ultra G2 SE, and Johnson Controls iSTAR Edge G2 allows CAPEC‑560: Use of Default Credentials. This issue affects iSTAR Ultra: before 2.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02; iSTAR Ultra G2: before 6.9.2.CU02; iSTAR Ultra G2 SE: before 6.9.2.CU02; iSTAR Edge G2: before 6.9.2.CU02.
-
CVE-2026-122144
A security flaw has been discovered in nliautaud pico-content-editor up to 02d5ad6c820c5050c542ab9505819b5e0a0ba1af. This vulnerability affects unknown code. The manipulation results in cross-site request forgery. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-86987
An authorization issue was addressed with improved entitlement checks. This issue is fixed in iOS 27.2 and iPadOS 27.2. A remote attacker may be able to access sensitive user data.
-
CVE-2026-112616
An authorization issue was addressed with improved access control. This issue is fixed in iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. An app may be able to access sensitive user data.
-
CVE-2026-114353
Hidden functionality (undocumented backdoor) in the root-privileged 'assistant' daemon in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a physically-present attacker with USB access to execute arbitrary OS commands as root by sending the hard-coded magic string 'dji26656677' to the USB-gadget serial interface (/dev/ttyGS0), after which each subsequent line is passed to system().
-
CVE-2026-21172
Incomplete cleanup in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to establish an unauthorized connection.
-
CVE-2026-21170
Improper enforcement of behavioral workflow in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to write arbitrary files with Smart Switch privilege.
-
CVE-2026-12963
A vulnerability that could allow a viewer account to gain unauthorized access to network attached storage devices on the server.
-
CVE-2026-12964
A vulnerability allowing for privileged escalation of the viewer account to gain administrator privileges.
-
CVE-2026-111492
SQL injection in the push notification handler of the MatchPoint Android app, which processes messages from Firebase Cloud Messaging and constructs queries by concatenating untrusted data. An attacker capable of interacting with the component could manipulate queries and access sensitive information from the local database, including credentials stored in the versions described in the report. The scope of the injection is limited to the device.
-
CVE-2026-118608
Alpine iLX-F511 libanwbtstack.so prh_rfcomm_cc_process_test Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the prh_rfcomm_cc_process_test function. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-29018.
-
CVE-2026-21175
Incorrect permission assignment for critical resource in Samsung Update prior to version 3.0.111.0 allows local attackers to execute arbitrary code.
-
CVE-2026-85068
Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.4.2 through 2.8.5, ippon_command in drivers/blazer_usb.c partially initializes char tmp[64] with a short Megatec status query and then passes a fixed eight-byte chunk to usb_control_msg. A malicious firmware-controlled USB device presenting the Mustek Powermust VID 0x06da and Mustek Powermust PID 0x0003 matches blazer_usb_id, selects ippon_subdriver, and can receive the uninitialized trailing stack bytes during normal polling. The disclosure is bounded and read-only, requires physical or supply-chain access to the USB bus, and has no established integrity or availability impact. This issue is scheduled to be fixed in version 2.8.6.
-
CVE-2026-54375
VitaFit Android application (com.vt.vitafit) before 2.8.1.0 contains an insecure session management vulnerability that allows attackers to extract or intercept unencrypted m_session_id tokens stored in application backups, which remain valid for ten years. Attackers can use a stolen session token to read and modify the victim's account or delete the account's authentication record, preventing the legitimate owner from logging in again.
-
CVE-2026-112618
An access issue was addressed with improved access restrictions. This issue is fixed in iOS 27.2 and iPadOS 27.2, visionOS 27.2. An app may be able to access sensitive user data.
-
CVE-2026-21152
Improper input validation in libMyFilterPlugin.camera.samsung.so prior to SMR Nov-2026 Release 1 allows local attackers to potentially execute arbitrary code. User interaction is required for triggering this vulnerability.
-
CVE-2026-108387
radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.2, attacker-controlled data from several binary format plugins could reach RBinInfo->bclass. Opening or analyzing a crafted Pebble or Sega Mega Drive binary could place a dbg:// URI in bclass, causing radare2 to reopen the input through the debug input/output plugin and ultimately pass attacker-controlled arguments to execvp(). This could execute commands with the privileges of the radare2 process without an explicit debugging command. This issue is fixed in version 6.2.2.
-
CVE-2026-112547
A type confusion issue was addressed with improved checks. This issue is fixed in iOS 27.2 and iPadOS 27.2. An app may be able to access sensitive user data.
-
CVE-2026-91386
Vulnerability in the JD Edwards EnterpriseOne Orchestrator product of Oracle JD Edwards (component: E1 IOT Orchestrator Security). Supported versions that are affected are 9.2.0.0-9.2.26.5. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the JD Edwards EnterpriseOne Orchestrator executes to compromise JD Edwards EnterpriseOne Orchestrator. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all JD Edwards EnterpriseOne Orchestrator accessible data as well as unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Orchestrator accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N).
-
CVE-2026-21149
Improper access control in StatusBarManagerService prior to SMR Nov-2026 Release 1 allows local attackers to use the privileged APIs.
-
CVE-2026-21150
Improper access control in edmnativehelper prior to SMR Nov-2026 Release 1 allows local attackers to access sensitive information.
-
CVE-2026-21141
Improper access control in Samsung Dialer prior to SMR Nov-2026 Release 1 allows local attackers to access sensitive information.
-
CVE-2026-21142
Incorrect default permissions in Samsung Contacts prior to SMR Nov-2026 Release 1 allows local attackers to access profile configuration.
-
CVE-2026-101174
DoS vulnerability in the DSoftBus module. Impact: Successful exploitation of this vulnerability may affect availability.
-
CVE-2026-81038
The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path. On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations.
-
CVE-2026-21159
Improper authorization in Samsung Pass prior to version 5.2.12.7 allows physical attackers to access sensitive information.
-
CVE-2026-102739
ESPectre is a Wi-Fi motion sensing platform for ESP32. Prior to 3.0.0-rc1, Micro-ESPectre analysis tools, including tools/6_optimize_filter_params.py, tools/1_analyze_raw_data.py, and tools/10_train_ml_model.py, load NPZ datasets with NumPy pickle support enabled through micro-espectre/tools/csi_utils.py and a direct loader. A malicious dataset contributor or pull-request author can place an object-typed array in a .npz file under micro-espectre/data, causing pickle-controlled code to execute as the maintainer or developer when a documented analysis tool accesses the field. This issue is fixed in version 3.0.0-rc1.
-
CVE-2026-127915
The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it. The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying. The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator.
-
CVE-2026-123271
ChatCLI before v1.215.2 contains an improper validation vulnerability in the MCP OAuth login flow that uses server-supplied Protected Resource Metadata as the resource indicator without checking it matches the configured server URL. A malicious MCP server can declare another resource on the same authorization server, obtain the user's bearer token for it, and replay that token against the other resource.
-
CVE-2026-86925
An authorization issue was addressed with improved state management. This issue is fixed in iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. An app may be able to access sensitive user data.
-
CVE-2026-21151
Improper privilege management in TransitionPlayer prior to SMR Nov-2026 Release 1 allows local privileged attackers to execute arbitrary code with launcher privilege.
-
CVE-2026-115758
SumatraPDF is a multi-format reader for Windows. In version 3.6.1 and earlier, HttpGet() in src/base/Http_win.cpp unconditionally passes INTERNET_FLAG_IGNORE_CERT_CN_INVALID to WinINet, disabling hostname matching for HTTPS update metadata and crash-symbol requests while retaining certificate-chain validation. A network-positioned attacker with a Windows-trusted certificate for an attacker-controlled domain can impersonate the project's update host, inject promo text and a clickable URL before update metadata validation, and provide an attacker-controlled archive to ExtractSymbols(). Installer replacement is not directly possible because HttpGetToFile() validates TLS and MaybeStartUpdateDownload() restricts the download host. No fixed version is available as of this review.
-
CVE-2026-122124
On Yealink UVC40 E2 devices before 319.410.0.71, an attacker with short-term physical access can steal Wi‑Fi credentials via the USB interface. Sensitive data within the firmware configuration can be abused to gain root privileges on the device. Within Wi‑Fi coverage, the attacker may perform audio and video eavesdropping with no LED alert from the device.
-
CVE-2026-116259
A security flaw has been discovered in libimobiledevice up to 1.4.0. This vulnerability affects the function afc_get_device_info_key of the file src/afc.c of the component Device Info Handler. Performing a manipulation of the argument Value results in memory corruption. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-18767
A local low privileged attacker or process can access I/O ports via TcRouter.sys because of exposed IOCTL function calls resulting in a full compromise of the affected devices.
-
CVE-2026-18768
A local low privileged attacker can access arbitrary physical memory or define its mapping via TcRouter.sys because of exposed IOCTL function calls resulting in a full compromise of the affected devices.
-
CVE-2026-18769
A local low privileged attacker can move arbitrary physical memory content via TcRouter.sys because of exposed IOCTL function calls resulting in a full compromise of the affected devices.
-
CVE-2026-123203
NEURON (CoreNEURON) through 9.0.2 contains a stack buffer overflow vulnerability that allows attackers to corrupt stack memory by supplying over-long tokens in a crafted model dataset. Attackers can place oversized version or mechanism-name tokens in bbcore_mech.dat, globals.dat, or files.dat loaded by nrniv-core to crash the process.
-
CVE-2026-68993
A double free vulnerability in NPU driver due to improper pointer management (940)
-
CVE-2026-112609
This issue was addressed with improved checks. This issue is fixed in iOS 27.2 and iPadOS 27.2. An app may be able to access sensitive user data.
-
CVE-2026-78119
The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations. An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64. The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions. The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default.
-
CVE-2026-129187
A vulnerability in the Phison SSD controller firmware Phison E16; EGFM13.2 allows a local attacker with administrative privileges to bypass the "Security Access" handshake by leveraging leaked RSA parameters found in vendor utility binaries. By successfully completing the authentication, an attacker can access vendor-specific commands that permit arbitrary memory read and write operations. Because the firmware's code regions lack protection, these primitives can be used to overwrite existing handlers and achieve volatile code execution on the SSD controller.
-
CVE-2026-129190
A vulnerability in the Phison SSD controller firmware Phison E12; ECFM32.2 allows a local attacker with administrative privileges to bypass the "Security Access" handshake by leveraging leaked RSA parameters found in vendor utility binaries. By successfully completing the authentication, an attacker can access vendor-specific commands that permit arbitrary memory read and write operations. Because the firmware's code regions lack protection, these primitives can be used to overwrite existing handlers and achieve volatile code execution on the SSD controller.
-
CVE-2026-68509
FairEmail is a fully featured, open source, privacy-friendly email app for Android. Prior to 1.2325, shared attachment handling does not adequately sanitize an attacker-controlled filename before constructing its destination path. A local attacker-controlled app can therefore supply path components that escape the intended shared attachment directory and overwrite or corrupt files in the FairEmail private data directory, including account or message databases. Exploitation requires app lock using PIN or biometric authentication and user interaction to unlock FairEmail. This issue is fixed in version 1.2325.
CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.