CVEs of 2026.
Every CVE published in 2026 that we hold, ranked by exploit odds.
-
CVE-2026-99774
In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: reorder operations within espintcp_init_sk When enabled on a socket, espintcp sets the socket callbacks to its own before it has finished setting up its context and published it as icsk_ulp_data. Any one of those callbacks that gets called before will dereference a NULL icsk_ulp_data. Fix this by reording the operations, and add memory barriers to ensure callers will have a struct espintcp_ctx available. Add a few WRITE_ONCE/READ_ONCE too while we're there.
-
CVE-2026-99775
In the Linux kernel, the following vulnerability has been resolved: xfrm: interface: validate the IP header on xmit Packets injected into an xfrm interface (e.g. AF_PACKET on an xfrmi device) reach the xfrm output path without IP header validation, but xfrm4_transport_output() uses iph->ihl for __skb_pull() and memmove() and expects the header to be valid. vti_tunnel_xmit() already calls pskb_inet_may_pull() before handing packets to the xfrm output path. Do the same in xfrmi_xmit() and perform the header checks ip_rcv_core()/ip6_rcv_core() do on entry to the IP stack: reject wrong IP versions and malformed IPv4 header lengths.
-
CVE-2026-99777
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL.
-
CVE-2026-99768
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window.
-
CVE-2026-99770
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone.
-
CVE-2026-99565
In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared.
-
CVE-2026-99557
In the Linux kernel, the following vulnerability has been resolved: ceph: fail readdir when the MDS reply carries no dirfrag A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR request with a reply whose extra blob is empty. parse_reply_info() skips reply blobs whose length is zero, so parse_reply_info_readdir() never runs, r_reply_info.dir_dir stays NULL, and the reply still parses as successful. ceph_mdsc_do_request() returns 0 and ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check: /* extra */ ceph_decode_32_safe(&p, end, len, bad); if (len > 0) { ... err = parse_reply_info_extra(&p, p + len, req, features, s); ... } The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the mount root after an ms_mode=legacy mount, trimmed: BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:ceph_readdir+0xbff/0x3ea0 Call Trace: <TASK> ? __pfx_ceph_readdir+0x10/0x10 wrap_directory_iterator+0xa2/0xe0 iterate_dir+0x1da/0x5d0 __x64_sys_getdents64+0x13b/0x2a0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The unconditional frag read came in with 81c6aea5275ea ("ceph: handle frag mismatch between readdir request and reply"), so the bug is old. Treat a reply with no dirfrag as a protocol violation: warn once, drop the request and return -EIO, the same way ceph_readdir() already handles the two malformed-reply cases later in the function. Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the getdents64(2) above takes the machine down (oops=panic) on the first READDIR reply. With the patch it warns once and getdents64(2) returns -EIO, no oops, no hang. A conformant reply for an empty directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE — still lists "." and ".." and returns EOF on both kernels, so normal readdir behavior is unchanged. The oops is still present in v7.3-rc5 (72d3fcf802c45).
-
CVE-2026-99561
In the Linux kernel, the following vulnerability has been resolved: fork: don't create io threads once PF_POSTCOREDUMP is set zap_process() skips every thread that already has PF_POSTCOREDUMP set. Such a thread is past synchronize_group_exit(), so a coredump can't catch it anymore. It isn't counted in core_state->threads_remaining and it isn't sent SIGKILL. do_exit() sets PF_POSTCOREDUMP in synchronize_group_exit() and calls io_uring_files_cancel() right after that. The cancellation runs task work and a create_worker_cb() that io-wq queued before the exit creates a new io-wq worker from there. If another thread started a coredump in the meantime that worker joins a thread-group which is already being dumped. zap_process() never saw it so it was never counted. But when it exits it sees signal->core_state in synchronize_group_exit() and decrements threads_remaining like any other thread. So the count reaches zero one thread early and the dumper leaves coredump_wait_inactive() while a thread it counted is still running. The task has no fatal signal pending because zap_process() deliberately didn't send it one, and it never went through get_signal() so it doesn't have PF_SIGNALED either. Refuse to create an io thread when the creator has PF_POSTCOREDUMP. That costs nothing. io_uring_files_cancel() raises IO_WQ_BIT_EXIT before it runs any task work, so a worker created from there only ever gets to exit again, and io_should_retry_thread() doesn't retry -EINTR. Clearing PF_POSTCOREDUMP for the new thread in copy_process() was the other option. It makes the worker a thread like any other, but it only helps while the dump hasn't started. A worker born after zap_process() has run is invisible to it whatever its flags say and still decrements threads_remaining on the way out. Refusing to create it covers both, and then no task is ever born with the flag, so there is nothing to clear. Moving io_uring_files_cancel() ahead of synchronize_group_exit() closes the same window. It runs the cancellation, and whatever that can block on, before the thread announces itself to the dumper. A thread that blocks there never reaches coredump_task_exit() at all, so the dumper ends up waiting for a thread that never parks. Refusing the creation leaves the cancellation where it is. But it's very ugly to run io_uring work even before we did all the generic exit work.
-
CVE-2026-99548
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix early procfs exposure race Currently, init_cifs() calls cifs_proc_init() near the beginning of the function, before INIT_LIST_HEAD, leading to a momentarily uninitialized, but exposed, procfs. If a userspace process reads this empty procfs, iterating over a zeroed list_head leads to a NULL pointer dereference and a kernel oops/panic. For example, if a delay is added between cifs_proc_init() and INIT_LIST_HEAD, and a userspace process is polling /proc/fs/cifs/DebugData, the following oops occurs: BUG: kernel NULL pointer dereference, address: 0000000000000608 Oops: Oops: 0000 [#1] SMP PTI CPU: 0 UID: 0 PID: 3477 Comm: cat Not tainted 7.3.0-02212-g4df4d2a577db-dirty #6 PREEMPT(lazy) RIP: 0010:cifs_debug_data_proc_show+0x103/0xd80 [cifs] Call Trace: <TASK> ? seq_read_iter+0x86/0x400 ? seq_read_iter+0x86/0x400 seq_read_iter+0x183/0x400 proc_reg_read_iter+0x62/0x90 copy_splice_read+0x215/0x310 splice_file_to_pipe+0xec/0x1c0 do_splice+0x4b8/0x780 __se_sys_splice+0x18f/0x250 do_syscall_64+0x109/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by moving cifs_proc_init() down in init_cifs(), ensuring it runs only after all internal lists, locks, counters, and workqueues are fully ready, but before registering the filesystem. Update the error cleanup ladder and exit_cifs() to maintain proper LIFO order.
-
CVE-2026-99549
In the Linux kernel, the following vulnerability has been resolved: smb: client: do not pass a NULL buf to is_oplock_break() receive_encrypted_read() sets *num_mids = 1 and never writes the caller's bufs[]. Offload returns -1 with *num_mids = 0, so the demultiplex thread skips the frame. The inline decrypt path returns 0 even when smb2_find_mid() fails. cifs_demultiplex_thread() then treats mids[i] == NULL as an oplock break and calls is_oplock_break(bufs[i], server) with bufs[i] still NULL. smb2_is_valid_oplock_break() reads hdr.Command at offset 12 and oopses. A large encrypted READ whose MessageId does not match is enough to panic cifsd. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 100 Comm: cifsd RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs] cifs_demultiplex_thread Kernel panic - not syncing: Fatal exception Return -1 when inline decrypt finds no mid, and skip is_oplock_break() plus the unknown-frame dump when bufs[i] is NULL. receive_encrypted_standard() already assigns bufs[*num_mids].
-
CVE-2026-99550
In the Linux kernel, the following vulnerability has been resolved: ocfs2: pin owning modules for open debugfs files The OCFS2 debugfs file operation tables do not set owner. The full debugfs proxy obtains real_fops with fops_get() at open and keeps it until final release. Without an owner, this does not acquire a reference to the module containing the table and its callbacks. Removing the debugfs entries does not drain retained open files. An open connected_nodes file can therefore outlive ocfs2_nodemanager and make full_proxy_release() read real_fops->release from freed module memory. Heming also reproduced the issue with fs_state and asked for the other OCFS2 debugfs operation tables to be checked. Set owner to THIS_MODULE in all eleven explicit debugfs operation tables: five in ocfs2_nodemanager, four in ocfs2_dlm, and two in ocfs2. The existing debugfs get/put pair then holds the appropriate module until final release. Leave the open, read and release callbacks unchanged. The blockcheck table already sets owner through DEFINE_DEBUGFS_ATTRIBUTE(), so it needs no change. The original controlled test used an unloadable OCFS2 module and case-local probe filters without changing the candidate open, unload or release logic. Closing a retained connected_nodes file after normal unload produced: BUG: unable to handle page fault for address: fffffbfff804cfef Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0xbf/0x190 Call Trace: <TASK> __fput+0x39a/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Modules linked in: [last unloaded: ocfs2_nodemanager]
-
CVE-2026-99551
In the Linux kernel, the following vulnerability has been resolved: ocfs2: drain quorum work before removing the cluster The configured cluster must remain available until an in-flight quorum decision has finished using its fencing method. o2quo_make_decision() drops qs_lock before calling o2quo_fence_self(), which marks heartbeat regions for unclean stop and then reads o2nm_single_cluster->cl_fence_method. Cluster removal clears the singleton without waiting for this independent system-workqueue item. When a failed-quorum decision overlaps removal of the heartbeat regions, nodes and cluster through configfs, the worker can be preempted after marking the regions and resume after the singleton has been cleared: Quorum worker Configfs removal select fence; drop qs_lock o2hb_stop_all_regions() remove regions; join heartbeat threads remove nodes; stop o2net clear singleton; release cluster read cl_fence_method The resumed read dereferences NULL instead of applying the configured fencing method. The heartbeat thread's dependency protects the local node only until the thread exits, and draining o2net does not wait for qs_work. Add o2quo_flush_work() to drain pending or running quorum decisions before clearing the singleton in o2nm_cluster_group_drop_item(). By this point the heartbeat regions and nodes have been removed, so their work publishers are stopped. The worker can finish while the cluster and its configured fencing method remain available. It does not acquire the configfs mutex held by the removal path. Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown and initialization failure, and have it call the same drain helper. Cluster removal uses only the explicitly named drain operation. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df] CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events o2quo_make_decision RIP: 0010:o2quo_fence_self+0x65/0x200 Register dump omitted. Call Trace: <TASK> o2quo_make_decision+0x345/0x3a0 ? __pfx_o2quo_make_decision+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---
-
CVE-2026-99552
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---
-
CVE-2026-99545
In the Linux kernel, the following vulnerability has been resolved: driver core: take parent lock on deferred probe USB interfaces should be probed with the parent USB device lock held, but this is not honoured when probe is deferred. Add a new bus_probe_device_deferred() helper to handle deferred probe where the parent device lock is not held.
-
CVE-2026-99546
In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: avoid stale mask references after delete Flower releases a mask reference when a filter is removed from the classifier. The filter object can remain alive while dump, walk, or hardware reoffload paths hold a reference to it. Those paths can then dereference f->mask after the mask has already been released. Keep the mask reference until the filter reference count reaches zero. Release the mask synchronously from the final __fl_put() while the caller still holds the tcf_proto reference, and leave the existing RCU work to free the mask. This keeps the mask available to every reader that still holds the filter. The filter is still removed from the classifier indexes immediately. Therefore, a deleted filter can temporarily retain an otherwise empty mask; fl_delete() uses the handle IDR, rather than the mask list, to determine whether the classifier has become empty. Failed mask assignment can leave fnew->mask as an error or borrowed pointer without an owned mask reference. Clear it before the common failure path so the final put cannot release an unowned reference. This fix does not add fields, snapshots, or per-filter memory.
-
CVE-2026-99547
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not RPM complete unrelated subtrees on unplug When a Thunderbolt device is unplugged, that switch and every switch subsequent to it on the bus device list is `complete()`d, not just its child devices. In the case of multiple domains, it may cause, eg, an attempt to `complete()` the uninitialized domain 1 root switch RPM completion on unplug of a switch from domain 0 (though ordering is not guaranteed numerically sorted). I initially noticed this issue on a Dell XPS9720 when the system would seem to sporadically not wake after unplugging a Thunderbolt dock. I tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if that resolved the issue, but the issue persisted. Eventually I found that I could consistently generate a kernel Oops reporting a page fault at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I ultimately ended up changing. To confirm this issue, I did an eBPF trace of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while unplugging in a variety of situations and found that an unplug from domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM completion is not initialized and thus is holding a null wait-list pointer, triggering the page fault. Here are the key sections of that eBPF trace. Note that HEAD denotes the completion's own wait-list HEAD: ``` RESCAN_ENTER domain=0 COMPLETE rescan_domain=0 target=0-1 target_domain=0 route=0x1 parent=0-0 unplugged=1 COMPLETION done=0 head=HEAD next=HEAD prev=HEAD BUS_WALK domain=0 start=0-1 callback=complete_rpm CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1 COMPLETE rescan_domain=0 target=1-0 target_domain=1 route=0x0 parent=domain1 unplugged=0 COMPLETION done=0 head=HEAD next=0 prev=0 complete+5 complete_rpm+43 bus_for_each_dev+133 icm_free_unplugged_children+250 icm_rescan_work+42 ``` This patch gates the `complete()` on an additional condition - that the Thunderbolt domain matches the domain of the device that was unplugged. I only have a single system with multiple Thunderbolt domains - the Dell XPS9720. I am consistently able to reproduce the Oops on that system. Since running with this patch, I have not seen the Oops reoccur. I have also tested it on a Thinkpad X1-Gen12, and that system boots and runs well with it, but it only has a single Thunderbolt domain, so it does not exercise the multi-domain failure case.
-
CVE-2026-99414
In the Linux kernel, the following vulnerability has been resolved: ovl: skip copy up of empty security.capability ovl_copy_xattr() gives up if it can't read an attribute that listxattr() has named. An empty security.capability, which anybody has been able to store on any file for a long time, is such a case: it is listed, and getxattr() has nothing to return for it. A file in a lower layer that carries one can't be copied up: it can't be written to, renamed or have its mode changed. There is nothing to copy if there are no data. Go on with the next one. [amir: treat -EINVAL as no capability too, and do the same in ovl_copy_up_meta_inode_data()]
-
CVE-2026-99415
In the Linux kernel, the following vulnerability has been resolved: ovl: set the revalidate flags after d_instantiate() stat() of a file on an overlayfs mount triggers a kernel warning and fails with ECHILD if another task is creating that file at the same time. This happens on an overlay with a FUSE upper layer, which is the layer where overlayfs creates new files. Write access to a directory on such an overlay is all a user needs to run the two tasks. The revalidate flags are DCACHE_OP_REVALIDATE and DCACHE_OP_WEAK_REVALIDATE. They tell path walk to call ->d_revalidate() or ->d_weak_revalidate() on a dentry, so that the filesystem can check that the cached dentry is still valid. An overlay dentry only has one of these flags if a dentry in one of its layers has it. FUSE dentries have the first one. When a flag is set on an overlay dentry, path walk calls ovl_dentry_revalidate_common(). That function only expects a dentry without an inode in RCU walk, while the dentry is being destroyed. For such a dentry outside of RCU walk, it hits a WARN_ON() and returns -ECHILD. So a negative overlay dentry must never have the flags set. ovl_instantiate() breaks this rule. When a task creates a file, the overlay dentry for the new name is hashed but still negative. ovl_instantiate() then works in this order: - It copies the flags from the new upper dentry to the overlay dentry. - It calls ovl_get_inode(), which can sleep in a getxattr request to the FUSE server. - Only then does it call d_instantiate(). A second task that looks up the name between the first step and the last finds a negative dentry with the flags set and revalidates it. Reproduced with a FUSE server that delays its getxattr reply: stat() of a name that was being created hit the WARN_ON() and failed with ECHILD. Fix this by setting the flags after d_instantiate().
-
CVE-2026-99407
In the Linux kernel, the following vulnerability has been resolved: xfs: don't repair fs summary counters with garbage LOLLM noticed that if we scan the filesystem and come up with totally garbage numbers for the summary counters, we don't actually mark the scan incomplete. Because we don't do this, repair can install the garbage values into the filesystem, making things worse. Don't do that.
-
CVE-2026-99408
In the Linux kernel, the following vulnerability has been resolved: xfs: don't proceed with xattr repair if the live update fails LOLLM observes that we ought to make one last check for failed live updates before replacing the xattr structure. Let's be cautious here.
-
CVE-2026-99409
In the Linux kernel, the following vulnerability has been resolved: xfs: don't fix the directory tree if live update fails LOLLM complains that we don't double-check dl->aborted one last time to before committing repairs to the filesystem. This is important because the live update handler could have set ->aborted if it encountered a runtime error.
-
CVE-2026-99410
In the Linux kernel, the following vulnerability has been resolved: xfs: always reset incore attr fork buffer when resetting fork LOLLM noticed that the local format attr fork verifier depends on if_bytes being set correctly. However, the fork reset function doesn't reset that correctly, which can cause post-repair verifier failures. Fix that.
-
CVE-2026-128661
PHPGurukul Employee Leaves Management System v2.1 contains an insufficient verification vulnerability in the password recovery functionality in forgot-password.php. The application allows an unauthenticated user to access the password-change workflow by providing a valid employee ID and corresponding email address without requiring an additional out-of-band verification mechanism.
-
CVE-2026-21169
Improper input validation in Smart Switch prior to version 3.7.74.1 allows adjacent attackers to install arbitrary applications. User interaction is required for triggering this vulnerability.
-
CVE-2026-99303
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix NULL pointer dereference on VT switch + selection When selecting/pasting very quickly after VT switch, the tty is not set yet, leading to a NULL dereference. We can just abort the operation.
-
CVE-2026-99299
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: reject audio endpoint with zero packet size em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize without checking it, so a USB device that declares a zero-sized audio endpoint divides by zero at probe time. Reject a zero-sized audio endpoint like a missing one; the caller already unwinds on a negative return. Oops: divide error: 0000 [#1] SMP NOPTI Workqueue: usb_hub_wq hub_event RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718) Call Trace: em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887) em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258) usb_probe_interface (drivers/usb/core/driver.c:396) ... usb_set_configuration (drivers/usb/core/message.c:2268) usb_generic_driver_probe (drivers/usb/core/generic.c:250) usb_probe_device (drivers/usb/core/driver.c:291) ... usb_new_device (drivers/usb/core/hub.c:2703) hub_event (drivers/usb/core/hub.c:5961) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99300
In the Linux kernel, the following vulnerability has been resolved: media: go7007: only set audio_enabled if go7007_snd_init() succeeded go7007_register_encoder() sets go->audio_enabled before calling go7007_snd_init() and discards its return value. go7007_snd_init() assigns go->snd_context only on success, so a failed ALSA setup leaves audio_enabled set with snd_context still NULL. The disconnect path tests audio_enabled and calls go7007_snd_remove(), which dereferences snd_context unconditionally. go7007_snd_init() returns -ENODEV once its never-decremented static card counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the next attach; no memory pressure is needed. Set go->audio_enabled only once go7007_snd_init() has succeeded. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: usb_hub_wq hub_event RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273) Call Trace: go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336) usb_unbind_interface (drivers/usb/core/driver.c:461) device_remove (drivers/base/dd.c:618) device_release_driver_internal (drivers/base/dd.c:1349) bus_remove_device (drivers/base/bus.c:664) device_del (drivers/base/core.c:3965) usb_disable_device (drivers/usb/core/message.c:1478) usb_disconnect hub_event (drivers/usb/core/hub.c:5966) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-123670
The Essential Real Estate WordPress plugin before 5.3.6 does not verify that the recipients it allows for its contact email action are legitimate, allowing users with the self-registered Customer role to add any address to that allowlist so that unauthenticated users can then send emails with attacker-controlled content to it through the site.
-
CVE-2026-118791
The application implements software update functionality without adequate authenticity and integrity validation, allowing update packages to be accepted without sufficient cryptographic verification.
-
CVE-2026-116592
undici is an HTTP client for Node.js. In versions 7.30.1 and 8.12.2 through 8.12.3, when an originless Agent composes the redirect and shared cache interceptors, undici decides whether to store the final response under the original request key by inspecting only the final redirect hop, which bypasses the earlier fix for CVE-2026-109829 that compared only the initial and final origins. A redirect that bounces through an untrusted origin and returns to the trusted origin is still cached under the trusted key, an intermediate hop's Vary is dropped so a response that varies on Authorization or Cookie can be served to a different user, and an intermediate hop's no-cache or default-uncacheable status is ignored so a non-storable redirect is laundered into a cacheable entry. An attacker who controls a redirect target from a trusted URL can poison the cached entry for that URL or have a private, per-user response served to a later caller. The issue is fixed in undici 7.30.2 and 8.12.4, and users should upgrade to one of those versions or later. As a workaround, compose the interceptors as cache then redirect, use per-origin dispatchers and cache stores, or disable shared caching on redirect-capable requests.
-
CVE-2026-59263
A manipulated document opened in Apache OpenOffice 4.1.16 or earlier may allow substituted content to be displayed manipulating the user. Such documents are corrupt and should not be opened. Users are recommended to upgrade to version 4.1.17, which fixes this issue.
-
CVE-2026-99250
In the Linux kernel, the following vulnerability has been resolved: printk: Postpone kthread startup There have been various bug reports related to SMP systems hanging on boot. The reports vary but seem to have some overlap with regard to missed IPI's during SMP setup. The reports also show that reverting NBCON console usage allows the bugs to disappear. The NBCON kthreads for console printing are started very early during boot using early_initcall(). Since these kthreads are asynchronously enabling/disabling interrupts during early boot, they may be interfering with early SMP setup on some hardware platforms. Starting the console printing kthreads later has shown to avoid the hanging on systems that could previously reproduce the issue. Postpone kthread starting until after all arch initcalls have completed.
-
CVE-2026-99240
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_goal() for zero target_value Patch series "mm/damon: move zero damos quota target_value handling to the core layer". Having zero DAMOS quota target value can cause division by zero. DAMON API callers are checking the target value parameters to avoid that. It is easy to make mistakes in some of the multiple API callers. Move that to the core layer. Patch 1 adds the corner case handling into the core layer DAMON parameters validation logic. Patches 2 and 3 remove no more needed DAMON API callers side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER, respectively. This patch (of 3): If a DAMOS scheme has a damos_quota_goal of zero target_value, damos_quota_goal() could trigger division-by-zero error. Hence each DAMON API callers should do the zero target_value validation. It is easy to make mistakes. Actually such bugs in DAMON_LRU_SORT and DAMON_SAMPLE_MTIER were found and fixed [1]. It is better to handle the corner case only once in the core layer, instead of multiple places in all DAMON API callers. One straightforward option is using an alternative denominator for the corner case in the damos_quota_goal(). However, the zero target_value is meaningless. In this case, the quota goal is always evaluated as achieved or over-achieved. The quota will only keep being reduced. Simply avoid using zero target_value by adding a check in the core layer DAMOS quota goal parameters validation/commit path, damos_commit_quota_goal(). Update it to return an error in the case. Also update its caller to propagate the error.
-
CVE-2026-99230
In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: don't leave list poison in ->hash_node io_uring_cmd_del_cancelable() uses hlist_del() to take a command off ->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in ->hash_node. Requests are recycled through the request cache without being reinitialised, and not every user of ->hash_node sets it up before it is used: If a vectored futex wait is woken while futex_wait_multiple_setup() is still queueing the futexes, io_futexv_wait() doesn't add the request to ->futex_list, and leaves the completion to the task_work queued by the wake up. io_futexv_complete() ends in __io_futex_complete(), whose hlist_del_init() is fine for a request that is unhashed, which is how all other users of the node leave it. If the request was a cancelable uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through LIST_POISON2: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-...] RIP: 0010:io_futexv_complete+0x219/0x420 Call Trace: tctx_task_work_run+0x804/0x950 tctx_task_work+0x71/0xa0 task_work_run+0x118/0x200 Leave the node unhashed.
-
CVE-2026-99214
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Move packet RAM enable to PM runtime Audio can be triggered by the HPD handler and start up before video has been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe. vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the infoframe, however, if the video hasn't been enabled, vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes, causing the following splat: [ 201.570266] ------------[ cut here ]------------ [ 201.570293] Packet RAM has to be on to store the packet. [ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606 [...] [ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 201.758499] Call trace: [ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P) [ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4] [ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper] [ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper] [ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4] [ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper] [ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec] [ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core] [ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core] [ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core] [ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm] [ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm] [ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm] [ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm] [ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm] [ 201.846802] __arm64_sys_ioctl+0x88/0xd8 [ 201.850769] invoke_syscall+0x48/0xf4 [ 201.854470] el0_svc_common+0x80/0xd8 [ 201.858171] do_el0_svc+0x1c/0x28 [ 201.861520] el0_svc+0x3c/0xb0 [ 201.864605] el0t_64_sync_handler+0x68/0xdc [ 201.868834] el0t_64_sync+0x198/0x19c [ 201.872536] ---[ end trace 0000000000000000 ]--- Considering that Packet RAM enable is essentially a power management configuration, move its enabling/disabling to the Runtime PM hooks. Note that post_crtc_disable() still stops all infoframes, but keeps Packet RAM enabled, leaving it to be disabled by runtime suspend.
-
CVE-2026-99082
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.
-
CVE-2026-99073
In the Linux kernel, the following vulnerability has been resolved: ipv4: stop exception dump when nexthop group shrinks Commit 4ce5dc9316de ("inet: switch inet_dump_fib() to RCU protection") allowed IPv4 FIB dumps to run concurrently with nexthop replacement. fib_dump_info_fnhe() uses fib_info_num_path() as the loop bound, then fib_info_nhc() independently reloads nh->nh_grp. If RTM_NEWNEXTHOP replaces a group with fewer paths between those loads, fib_info_nhc() returns NULL and the dump dereferences it through nhc_flags. Stop the walk when the indexed path is absent. Nexthop groups are dense, so the current snapshot has no later path.
-
CVE-2026-98938
In the Linux kernel, the following vulnerability has been resolved: rust: irq: pass RegistrationInner as cookie to request_irq With commit ba268514ea14 ("rust: devres: fix race condition due to nesting"), Devres::new() returns Result<Self> by value instead of initializing in-place via PinInit. Because request_irq() is called inside Devres::new(), registration.inner is still uninitialized when the IRQ is enabled, so accessing registration.inner.device() in the IRQ callback can read uninitialized memory. Fix this by storing the Device and handler pointer in RegistrationInner and passing RegistrationInner as the IRQ cookie after its fields are initialized. This is not needed in mainline because commit 98c63ce4d760 ("rust: irq: make Registration compatible with lifetime-bound drivers") removed Devres from irq::Registration and moved request_irq() after all fields are initialized.
-
CVE-2026-99756
In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent deleting the wrong subvolume by ID When deleting a subvolume by ID, btrfs_ioctl_snap_destroy() first resolves the requested ID to a name, then looks up that name again under the parent directory lock. A concurrent rename can change which subvolume is associated with the name between these operations. Since the deletion path does not verify the ID of the resolved subvolume, it can delete a different subvolume while leaving the requested one intact. This was reproduced by repeatedly exchanging the names of two subvolumes using renameat2(RENAME_EXCHANGE) while deleting one of them by ID. The wrong subvolume was deleted in 9 out of 14 independent tests. Fix this by checking that the resolved subvolume ID matches the requested ID while holding the parent directory lock. Return -EAGAIN on a mismatch so that userspace can retry the operation instead of being told that the requested subvolume does not exist.
-
CVE-2026-99746
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after hda_sdw_bpt_send_async() has already started the TX and RX DMA streams, intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly without calling hda_sdw_bpt_wait(). As a result, hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while the DMA hardware is still running. Disable any running TX or RX BPT DMA stream at the start of hda_sdw_bpt_close() before unmapping channels and depreparing DMA resources.
-
CVE-2026-99748
In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct.
-
CVE-2026-99749
In the Linux kernel, the following vulnerability has been resolved: ksmbd: enforce the read-only share flag when creating a stream When a share is read-only, smb2_open() rejects opens that would create or truncate a file. Creating a named stream on an existing file with streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check, and smb2_set_stream_name_xattr() then creates the stream. On a Time Machine share, opening a missing AFP_AfpInfo stream also writes one. A user who can write a file at the filesystem level can therefore add streams to it through a read-only share. Do not create a stream or synthesize AFP_AfpInfo when the share is not writable. Existing streams still open normally, and a missing stream opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND.
-
CVE-2026-99736
In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix accounting of swapin-error markers A failed swap read replaces the swap entry with a swapin-error marker in the page-cache and subtracts its pages from "alloced" and "swapped"; however, it leaves their block charge in place. Removing the marker during truncate then subtracts from "swapped" again. This can underflow the counters or make swapped reach zero while other pages remain swapped out, causing swapoff to loop without finding them. When installing the marker, subtract only from "swapped" and let shmem_recalc_inode() reduce "alloced" and release the block charge. Make shmem_free_swap() report successful removal separately from the number of swap pages freed, so removing a swapin-error marker does not subtract from "swapped" again. It's a bit confusing, but replacing a swapped out page by a swapin-error marker in shmem_set_folio_swapin_error() behaves as follows: Initially: alloced=1, swapped=1, nrpages=0 Calling shmem_recalc_inode(inode, 0, -1) -> swapped = 0 -> freed = 1 - 0 - 0 = 1 -> alloced -= freed -> alloced=0, swapped=0, block charge released
-
CVE-2026-99738
In the Linux kernel, the following vulnerability has been resolved: mm/shmem: preserve allocation errors when swapping in large entries shmem_swapin_folio() adjusts swap to the requested slot within a large swap entry before allocating a folio. If allocation or charging fails, the error path compares this adjusted value with the original entry still stored in the XArray in shmem_confirm_swap(). Unless the index is at the start of the entry, this turns -ENOMEM into -EEXIST even though nothing changed. The caller retries -EEXIST, so persistent allocation failures can leave the task spinning instead of returning the error. Restore swap to index_entry on allocation failure so the existing error path checks the original entry. This preserves the allocation error if the entry is unchanged and still retries if it changed concurrently.
-
CVE-2026-99729
In the Linux kernel, the following vulnerability has been resolved: mm/rmap: handle device-exclusive entries in folio_referenced_one() page_vma_mapped_walk() can return non-present device-exclusive entries, but folio_referenced_one() passes them to PTE young-bit accessors that require present PTEs. We must neither call clear_flush_young_ptes_notify() nor folio_pte_batch() with non-present entries. For example, clearing the young bit on non-present PTEs can corrupt the entry: on arm64 PTE_AF overlaps the swap type, so clearing it turns a device-exclusive entry into an ordinary swap entry. folio_pte_batch() will VM_WARN_ON_FOLIO. Apply the same approach as the previous fixes to e.g., damon_ptep_mkold(): treat these entries as old from the CPU's perspective and obtain their young state through the MMU notifier. Skip PTE batching and MGLRU look-around for non-present entries, and don't modify non-present PTEs.
-
CVE-2026-99732
In the Linux kernel, the following vulnerability has been resolved: mm/filemap: read mapping->a_ops->free_folio under i_lock memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops after the inode has been freed. Once the folio is deleted from the pagecache it no longer pins the mapping, so after i_lock is dropped e.g., a concurrent final iput() can evict and free the inode before filemap_free_folio() looks up mapping->a_ops->free_folio. Most callers hold a reference on the inode, but not all. Documentation/filesystems/vfs.rst explicitly states that ->free_folio() must not assume the original address_space mapping still exists. Fix it by loading ->free_folio while i_lock is still held, similar to what folio_unmap_invalidate() does. Inline filemap_free_folio() into its remaining caller such that delete_from_page_cache_batch() also just loads the callback before dropping the i_lock. The bug was found by code inspection and has not been reproduced. Fix generated by an LLM and sent by Josef Bacik in private. [ david: get rid of filemap_free_folio() entirely; improve patch description ]
-
CVE-2026-99733
In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look again if a folio left the mapping invalidate_inode_pages2_range() skips a folio which no longer belongs to the mapping by the time it has got the folio lock, on the assumption that somebody else has removed it from the page cache. But the folio may have been replaced, and then there is a new folio with the same data at that index. For most cases, like folio migration, that is impossible. However, collapse_file() only checks the refcount of the old folios, under the i_pages lock, and relies on their folio locks from there on. That works for users which repeat the lookup when they find folio->mapping changed. The following scenario is, however, possible: CPU0 pwrite(O_DIRECT) CPU1 collapse_file() kiocb_invalidate_pages() read the folio (old data), lock it refcount check the write completes copy to new_folio kiocb_invalidate_post_direct_write() find_get_entries() -> old folio xas_store(new_folio) folio->mapping = NULL folio_unlock(folio) folio_lock() folio->mapping != mapping -> continue In that scenario, the collapsed folio with the data from before the write stays in the page cache after the write has returned. This used to be impossible, as khugepaged only collapsed files that nobody had open for writing. Restart the lookup at that index, like shmem_undo_range() does. The same problem seems to exist in truncate_inode_pages_range() as well when truncate_inode_folio() fails, so handle it there as well, but slightly differently: simply check once more through find_get_entries().
-
CVE-2026-99727
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO.
-
CVE-2026-99728
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix list corruption when deferred_split_scan() races with deferred_split_folio() Since the deferred split queue became a list_lru, the isolate callback moves the folios it took a reference on to an on-stack list, linked through folio->_deferred_list, and deferred_split_scan() takes them off that list with list_del_init() without holding the list_lru lock. deferred_split_folio() does not know about the on-stack list. It only holds the list_lru lock when it looks at the same list_head, and it can run for such a folio: a THP is queued when it is mapped, as a candidate for the underused check, and is queued "again" when a part of it gets unmapped: CPU0 deferred_split_scan() CPU1 deferred_split_folio() list_del_init(&folio->_deferred_list) next->prev = prev prev->next = next entry->next = entry list_lru_lock_irqsave() folio_set_partially_mapped() __list_lru_add() list_empty(item) -> true list_add_tail(item, &l->list) item->next = &l->list item->prev = tail entry->prev = entry The folio now sits on the list_lru with ->prev pointing to itself. The next removal leaves the neighbours pointing to it, and they still do so after the folio has been freed. With CONFIG_DEBUG_LIST: list_del corruption. prev->next should be ffd4000000270090, but was ffd4000000278090. (prev=ffd4000000270090) Fix it by grabbing the lock around list_del_init() so deferred_split_folio() cannot race with it.
-
CVE-2026-99716
In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Set nr_cores only after core_data allocation succeeds In init_temp_data(), pdata->nr_cores is populated from topology_num_cores_per_package() before allocating pdata->core_data. If that allocation fails, init_temp_data() returns NULL with pdata->core_data still NULL and pdata->nr_cores set to a positive value. coretemp_add_core() logs the error without failing coretemp_cpu_online(), so the CPU still comes online with pdata->hwmon_dev registered. When the CPU is later taken offline (or the module is unloaded), coretemp_cpu_offline() calls get_temp_data(pd, cpu), which loops up to pdata->nr_cores and dereferences the NULL pdata->core_data pointer. Store the core count in a local variable and assign pdata->nr_cores only after pdata->core_data is allocated, preserving the invariant that pdata->nr_cores is zero whenever pdata->core_data is NULL.
CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.