CVEs of 2026.
Every CVE published in 2026 that we hold, ranked by exploit odds.
-
CVE-2026-99530
In the Linux kernel, the following vulnerability has been resolved: cgroup: serialize migrations of newly forked processes With favordynmods enabled, a cgroup.procs migration takes the target threadgroup's cgroup_threadgroup_rwsem for writing. A process fork holds the forking threadgroup's semaphore for reading. These are different semaphores when fork creates a new process. copy_process() publishes the child's PID before cgroup_post_fork() links the child to its css_set. A writer can find the child in that interval, take its uncontended semaphore, and migrate it while child->cgroups still points to init_css_set and child->cg_list is empty. Migration links the node into init_css_set.mg_tasks. cgroup_post_fork() then adds the same node to the intended css_set as though it were unlinked, corrupting both task lists and their css_set ownership. This regresses the fork/migration race fixed by commit b12b533fa523 ("cgroups: add lock for child->cgroups in cgroup_post_fork()") and restored again in 2012 after the lock had been removed. The old task_lock protection was later superseded by global css_set and cgroup threadgroup locking. The change identified by the Fixes tag narrowed only the migration side back to a per-threadgroup lock, recreating the different-process exclusion failure. Take the new threadgroup's semaphore for reading before the child becomes visible and hold it through cgroup_post_fork(). Use a nested lock subclass because fork already holds the parent's semaphore. CLONE_THREAD children share the parent's signal_struct and remain covered by the existing lock. Migrations of unrelated, fully initialized threadgroups remain concurrent. An AI coding assistant was used to identify and reproduce the regression and to develop and test this fix.
-
CVE-2026-99498
In the Linux kernel, the following vulnerability has been resolved: s390/kprobes: Prevent kprobes on instructions with exception table entry The mvcos exception handler ex_handler_ua_mvcos() decodes the faulting instruction, assuming it is an mvcos instruction. In case the instruction is kprobed the decoded instruction is a breakpoint instruction instead, which leads to incorrect instruction decoding and potential register corruption. Fix this by simply preventing to set a kprobe on such instructions, similar like arm64 is doing it.
-
CVE-2026-99486
In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]
-
CVE-2026-108319
Tanium addressed a time-of-check time-of-use race condition vulnerability in Tanium Server.
-
CVE-2026-84443
LibreOffice Base documents can bind macros to document events, such as opening or closing the document. The macro security setting decides whether macros that come with a document may run. Macros bound to the events of a Base document were run without the macro security setting being applied, so opening or converting a crafted database document could run a macro and, through it, any command. In fixed versions macros bound to the events of a Base document follow the macro security setting, as macros in other documents do.
-
CVE-2026-101930
LibreOffice Writer can open HTML documents, and an HTML document can bind macros to events of the document as a whole, such as the document being opened or closed. Macros bound to these events were not taken into account by the macro security check, so they could run when the document was opened, whatever the macro security level. In fixed versions these macros follow the macro security settings like any other macro in the document.
-
CVE-2026-101353
LibreOffice Base documents can contain an embedded HSQLDB database, and other documents can use such a database as a data source. The definition of the database in a crafted document could make the database engine create or write files at locations outside the document, chosen by the document. In fixed versions the files of an embedded database are kept in a private location, and an embedded database cannot create table files anywhere else.
-
CVE-2026-121876
A flaw was found in the interaction between systemd-gpt-auto-generator and confidential computing guest VM images in OpenShift Sandboxed Containers (confidential peer pods). systemd-gpt-auto-generator automatically discovers and mounts GPT partitions by type GUID at boot with no user confirmation. In the confidential computing threat model, where the host/hypervisor is the adversary, a malicious host can inject partitions into the guest's virtual disk. Most critically, injecting a swap partition causes the guest kernel to page out TEE-encrypted memory to a host-controlled block device, breaking the confidentiality guarantee of the hardware TEE (AMD SEV-SNP, Intel TDX). The PodVM images use a GPT-partitioned disk with dm-verity on the root partition. However, the roothash= kernel parameter only disables root auto-discovery — non-root partitions (swap, /home, /var, /srv, /var/tmp) are still auto-discovered and mounted. The generator is shipped unmasked in the RHEL systemd-udev subpackage, and no kernel command line parameter in the measured UKI addon disables it. Additionally, the PodVM measurement script captures PCRs 3, 9, 11, and 12, but not PCR 5 (GPT partition table), so partition table modifications are not detected by remote attestation.
-
CVE-2026-112369
IBM Process Mining 2.0.0 through 2.2.1 could allow an authenticated user to perform unauthorized actions due to client-side enforcement of sever side security mechanisms.
-
CVE-2026-115937
The Mollie webhook endpoint accepts two independent, attacker-controlled parameters and never verifies that they belong together: * commerceTransactionHash — selects which Craft Commerce transaction is completed * id — selects which Mollie payment is queried for its status An unauthenticated attacker holding any paid Mollie payment ID from the merchant’s account can pair it with any transaction hash. Commerce queries Mollie, sees status: paid, and marks the target transaction successful for that transaction’s full amount, regardless of how much was actually paid.
-
CVE-2026-99065
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus() With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset hotplug operation becomes synchronous. That commit also removes the code that handles race between cpuset_hotplug_work and cpu hotplug notifier with the assumption that race is now gone. Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask") updates the cpuset code to always use cpu_active_mask instead of cpu_online_mask in some places including guarantee_online_cpus() which is renamed to guarantee_active_cpus() in that commit. In the case of CPU offline operation, cpu_active_mask is updated first in sched_cpu_deactivate() to remove the offline CPU before cpuset_handle_hotplug() is called to update the effective_cpus of the affected cpusets. The cpu_online_mask is updated after that near the end of the offline operation to remove the offline CPU. As a result, the race comes back and the top cpuset may not have any active CPU leading to NULL pointer dereference during the race window when guarantee_active_cpus() is called after cpu_active_mask is updated to remove the CPU to be torn down but before cpuset_handle_hotplug() is able to properly update the effective_cpus of the top cpuset. Fix this by adding back the NULL cs check to avoid this problem.
-
CVE-2026-99048
In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production.
-
CVE-2026-98997
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: only accept doorbell BOs as queue doorbell amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle into the doorbell domain. For a regular BO, TTM moves it with ttm_bo_move_null() and its contents are lost. Since an importer on the same device gets the exporter's GEM object, a client can do this to a buffer another client shared with it. Reject BOs that were not created in the doorbell domain. v2: drop the error message, use a local abo variable (Christian) (cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917)
-
CVE-2026-98987
In the Linux kernel, the following vulnerability has been resolved: namespace: look at the topmost mount for a mount namespace file attach_recursive_mnt() preallocates a mountpoint for the root of the topmost mount of the source so that a mount that already sits at the destination can be put on top of the source or on top of one of its propagated copies. The copies are made without CL_COPY_MNT_NS_FILE so their chain of overmounts is shorter than the source's. It ends below the first bind mount of a mount namespace file. So while the loop walks up the chain of the source it remembers the mountpoint of that mount in "shorter" and the existing mount is put there for the copies. But the loop ends at the topmost mount without ever looking at it. If the topmost mount is the only mount namespace file in the chain "shorter" stays NULL and mnt_change_mountpoint() attaches the existing mount of the copy below the root of the mount namespace file. That's a dentry of nsfs. No path walk in the copy's mount namespace ever gets there. The mount is gone until its parent goes and the copy that took its place can't be unmounted synchronously because it has a child: S bind mount of a file N bind mount of a mount namespace file on top of S A shared mount, B a slave of A, Q mounted on B/file move_mount(S, A/file) cat B/file -> the content of S instead of Q umount B/file -> EBUSY Look at every mount of the chain including the topmost one.
-
CVE-2026-98961
In the Linux kernel, the following vulnerability has been resolved: btrfs: unlock inode and extent in caller when io_uring read extent fails btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken the inode shared lock and the extent lock. On failure it used to unlock in out_fail, and a pages-array allocation failure returned -ENOMEM without unlocking at all. Unlock in the caller instead on all failure returns, matching the copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks in btrfs_uring_read_finished().
-
CVE-2026-98939
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Drop unnecessary PMD page copy when freeing On a box with a discrete GPU, lockdep reports a possible deadlock as soon as kswapd shrinks the TTM page pool. The immediate cause is an x86 commit that added an mmap_read_lock() to kernel page protection munging code. The huge vmap code holds the same lock over a GFP_KERNEL allocation, which is a no-no now that reclaim can take it. That allocation is in a page table *free* path and ends up being for dubious purposes[1]. Basically, it tries to avoid hardware setting Accessed=1 in page table entries that are unreachable by the hardware, a non-issue. Remove the PMD copy. Detach the original PMD page at the PUD, flush the mid-level caches, and free the PTE tables straight from the detached PMD page. With no allocation left, the locking issue is gone. Lockdep splat/analysis: WARNING: possible circular locking dependency detected 7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U ------------------------------------------------------ kswapd0/269 is trying to acquire lock: ((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0 but task is already holding lock: (pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm] Chain exists of: (init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem The cycle is built from three edges: 1) pool_shrink_rwsem -> (init_mm).mmap_lock The TTM shrinker restores the caching attribute of every page it frees, while holding pool_shrink_rwsem: ttm_pool_shrink() -> ttm_pool_dispose_list() -> ttm_pool_free_page() -> set_pages_wb() -> change_page_attr_set_clr() [ init_mm mmap read lock ] 2) fs_reclaim -> pool_shrink_rwsem The same shrinker, called from reclaim. 3) (init_mm).mmap_lock -> fs_reclaim ioremap() installing a huge PUD mapping over an existing PMD table: ioremap_page_range() -> vmap_range_noflush() -> vmap_try_huge_pud() [ init_mm mmap read lock ] -> pud_free_pmd_page() -> __get_free_page(GFP_KERNEL) [ enters reclaim ] [ dhansen: Lots of changelog munging/trimming and merged comments from my version of the fix. ]
-
CVE-2026-98928
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE.
-
CVE-2026-99542
In the Linux kernel, the following vulnerability has been resolved: ksmbd: deny access for an empty DACL instead of granting the request smb_check_perm_dacl() returns the access mask it computes to the SMB2 CREATE handler, which uses it as the granted access for the open. For a security descriptor whose DACL is present but contains no ACEs, the function is supposed to deny access: an empty (non-NULL) DACL grants no access to anyone except the object owner's implicit READ_CONTROL and WRITE_DAC (MS-DTYP 2.4.5). The empty-DACL branch only denies when both - the DACL has no trailing bytes (pdacl_size == sizeof(struct smb_acl)), and - the request contains bits beyond READ_CONTROL / WRITE_DAC. In every other case it takes the shared "goto err_out" with rc still 0, which returns success without modifying *pdaccess, so the caller grants the full requested access. Three problems follow: - The READ_CONTROL / WRITE_DAC carve-out models the owner's implicit rights, but the check runs before is_owner is computed, so those rights are handed to *every* caller, not just the owner. For READ_CONTROL the SMB2 CREATE path does not fall back to inode_permission(), so any user can read the security descriptor of an object whose empty DACL is meant to deny them. - A request of exactly READ_CONTROL and/or WRITE_DAC is granted to any caller. WRITE_DAC lets the handle rewrite the DACL. - A DACL that declares zero ACEs but carries trailing bytes (pdacl_size > sizeof(struct smb_acl)) skips the deny entirely and is granted whatever was requested. On shares where the NT ACL is the authoritative access control -- e.g. "force user" shares, where every client maps to one POSIX identity so POSIX cannot distinguish users -- this is an access-control bypass. Compute is_owner before the empty-DACL branch and deny access from an empty DACL unless the caller is the owner requesting no more than READ_CONTROL / WRITE_DAC.
-
CVE-2026-125264
FFmpeg through 9.0.2 contains an uncontrolled resource consumption vulnerability in parse_frame_header() in libavcodec/jpegxl_parser.c that fails to validate TOC entry counts against remaining input. Attackers can supply a crafted JPEG XL frame header with a permuted TOC and huge toc_count, making the parser loop excessively and exhaust CPU.
-
CVE-2026-125240
FFmpeg through 9.0.2 contains a resource leak vulnerability in svt_jpegxs_dec_decode() in libsvtjpegxsdec.c that leaks decoder instances when ff_set_dimensions() rejects frame dimensions. Attackers can supply a crafted JPEG XS stream, for example in MPEG-TS, with oversized headers to repeatedly leak decoder threads and buffers, exhausting memory.
-
CVE-2026-125207
FFmpeg through 9.0.2 contains an uncontrolled memory allocation vulnerability in the Interplay ACM decoder that allows attackers to exhaust memory via an attacker-controlled block size. Attackers can supply a crafted ACM file with maximum level and row count in extradata, making decode_init() allocate nearly a gigabyte and deny service.
-
CVE-2026-125199
FFmpeg through 9.0.2 contains a memory leak vulnerability in vc1_decode_frame() in libavcodec/vc1dec.c that leaks slice buffers when init_get_bits8() fails. Attackers can supply crafted files with repeated oversized VC-1 slices exceeding the bit reader limit to exhaust memory of decoding applications.
-
CVE-2026-125173
FFmpeg through 9.0.2 contains a memory leak vulnerability in libxevd_receive_frame() in libavcodec/libxevd.c that fails to free pkt_au when an access unit produces no picture. Attackers can supply a crafted EVC stream with many access units containing only parameter sets or non-frame NAL units to exhaust memory in the decoding application.
-
CVE-2026-99275
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short SESSION_SETUP responses smb2_check_message() accepts frames shorter than struct smb2_pdu when the SMB2 status is non-zero, before the minimum-PDU check added by b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP response is therefore accepted even though it cannot contain the SecurityBufferOffset and SecurityBufferLength fields. The parser then reads those fields from stale bytes left in the reused receive buffer by an earlier frame. With a long stale SecurityBufferLength, decode_ntlmssp_challenge() copies up to about 64 KB from beyond the receive object and sends the data back to the server in the NTLMv2 AUTHENTICATE target info. Reject short MPR SESSION_SETUP responses before the short-error path, and validate SecurityBufferOffset + SecurityBufferLength against the received response length before decoding the challenge. The ordering bypass is not new: the short-error early return predates b4694f269e66d, and the unvalidated SecurityBufferLength read predates the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable trees are affected. Reproduced on 6.6.87.2; the path is unchanged on mainline.
-
CVE-2026-118677
n8n before 2.41.4 and 2.42.x before 2.42.1 contains a missing confirmation vulnerability in the Local Gateway desktop app that allows its deep-link connect handler to silently re-pair the app with a different n8n instance. Attackers can lure users running the Local Gateway into opening a crafted n8n-computer-use:// link to connect their computer to an attacker-controlled instance, inheriting previously granted permissions and acting on the computer through the gateway.
-
CVE-2026-99100
In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengths The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state.
-
CVE-2026-99076
In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket.
-
CVE-2026-132121
Supergateway 2.4.0 through 4.2.2 contains a cross-site WebSocket hijacking vulnerability in stdio-to-WebSocket mode that allows malicious web pages to connect by bypassing missing Origin header validation. Attackers can open the /message WebSocket from a victim's browser, even against localhost-bound gateways, to initialize an MCP session and invoke wrapped stdio MCP server tools with victim privileges.
-
CVE-2026-130622
Incorrect authorization in the credential loading logic in AWS Private CA Connector for Kubernetes (aws-privateca-issuer) before 1.12.0 might allow an authenticated remote user with permission to create namespace-scoped issuers to obtain certificates, including subordinate CA certificates, signed by another namespace's AWS Private CA with that namespace's stored AWS credentials, via a namespace-scoped issuer that references a credentials Secret in that namespace. To remediate this issue, users should first copy any credentials Secret they intend a namespace-scoped issuer to use into that issuer's namespace and update the issuer's secretRef.namespace to match. Then, upgrade aws-privateca-issuer to version 1.12.0 or the AWS Private CA Connector for Kubernetes EKS add-on to version v1.12.0-eksbuild.1.
-
CVE-2026-130623
Incorrect authorization in the credential handling for namespace-scoped issuers in AWS Private CA Connector for Kubernetes (aws-privateca-issuer) before 1.12.0 might allow an authenticated remote user with permission to create namespace-scoped issuers to obtain certificates, including subordinate CA certificates, from every AWS Private CA and certificate template reachable by the controller's own AWS identity or by any IAM role that identity can assume. This happens because a namespace-scoped issuer that supplies no credentials, or sets only a role, falls back to the controller's own identity. To remediate this issue, users should first update any namespace-scoped issuers that rely on the controller's identity to use their own credentials. Then, upgrade aws-privateca-issuer to version 1.12.0 or the AWS Private CA Connector for Kubernetes EKS add-on to version v1.12.0-eksbuild.1.
-
CVE-2026-130385
Weblate 2026.11 through 2026.11.2 contains a time-of-check time-of-use race condition in the GET /api/tasks/{pk}/ endpoint that exposes unredacted repository error messages. Authenticated project members lacking vcs.view permission can poll failing repository tasks to obtain RepositoryCommandError text revealing upstream repository URLs, filesystem paths, and host names.
-
CVE-2026-123707
The WPGraphQL WordPress plugin before 2.27.1 does not restrict access to posts in custom non-public post statuses, allowing users with the Contributor role and above to read the content of other users' posts in those statuses.
-
CVE-2026-99092
In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map().
-
CVE-2026-99097
In the Linux kernel, the following vulnerability has been resolved: tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper() tee_dyn_shm_alloc_helper() derives nr_pages from a caller-supplied size and passes it to alloc_pages_exact() without checking it. For size == 0 nr_pages is 0, and alloc_pages_exact(0) calls get_order(0), which is documented as undefined and returns BITS_PER_LONG - PAGE_SHIFT. The page allocator then trips its order > MAX_PAGE_ORDER warning and fails the allocation; on a panic_on_warn kernel that ends the boot. This can be triggered by TEE_IOC_SHM_ALLOC with struct tee_ioctl_shm_alloc_data where size is 0. Reject a zero page count, as register_shm_helper() already does for the register path.
-
CVE-2026-99090
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934)
-
CVE-2026-116215
MacCMS v10 through 2026.1000.4056 contains a race condition vulnerability in Card::useData() that allows authenticated members to redeem one recharge card multiple times via the user/buy endpoint. Attackers can send many concurrent flag=card requests that pass the non-locking card read before it is marked used, inflating user_points to buy VIP upgrades and paid content.
-
CVE-2026-99086
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed.
-
CVE-2026-99085
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU.
-
CVE-2026-98988
In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change.
-
CVE-2026-98981
In the Linux kernel, the following vulnerability has been resolved: namespace: unhash a dentry before detaching the mounts on it unlink(), rmdir() and rename() remove the entry from the filesystem, call detach_mounts() on the entry with the inode locked and then call d_delete() once the inode is unlocked. The thing is that between detach_mounts() and d_delete() the dentry is still hashed and positive. But after detach_mounts() nothing covers the dentry anymore. A lookup that finds this dentry in the dcache can uncover what the mounts hid. That's a problem when unlinking files or directories that are mountpoints in other mount namespaces. Everybody who had the underlying entry covered can race the detach_mount() call until d_delete() has run. The race window isn't all that small. It encompasses namespace_unlock() with a full synchronize_rcu_expedited() grace period and the inode_unlock() of the entry. In my experiments three walkers that kept trying read an overmounted file in 11938 of the 16140 unlinks that removed its mountpoint from a bind mount of the filesystem within a minute. Fun fact, d_invalidate() has the same ordering problem but gets it right. It unhashes the dentry first and detaches the mounts afterwards. Let's do the same in __detach_mounts(): - A lookup that hasn't found the dentry yet misses it in the dcache and waits for the directory lock that the caller holds until the name is gone for good. - A lockless lookup that found it already fails the mount_lock check while the dentry still counts as a mountpoint and the d_seq check once it doesn't, and retries. This fixes the lockless path. We still need to fix the reference count lookup in a follow-up patch. So d_drop() the dentry. The dentry stays positive and held but can't be found anymore. Then proceed with the detach and unlink. Reproducer: The reads were counted with the program below, three walkers for 60 s in a VM with 4 CPUs. The race window is stretched with the debug patch pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it found a mountpoint dentry and before its mounts are crossed. fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts() and d_delete(). // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against lookups that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 wh ---truncated---
-
CVE-2026-99445
In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: drain IRQ work before unregistering supplies The VBUS work calls power_supply_changed(), but its managed cancellation is registered before the supplies. Cleanup can therefore unregister a supply while IRQ-triggered work is still pending. Commit 838767f50747 ("power: supply: pf1550: Fix use-after-free in power_supply_changed()") moved IRQ requests after supply registration, but left work cancellation before the supplies. That change protects the direct IRQ callbacks, while this fix drains the work they queue. Register the three work items after both supplies and before the IRQs. Cleanup then frees the IRQ producers, drains the work, and unregisters the supplies. The teardown ordering issue was found by static analysis.
-
CVE-2026-126347
Tornado is a Python web framework and asynchronous networking library. In versions through 6.6.0, applications using tornado.web.RedirectHandler with URL templates that allow attacker-controlled substitutions to influence the destination can be vulnerable to an open redirect using three or more leading slashes. Differences between Python’s URL parsing and browser URL interpretation allow a crafted destination to redirect a user to an attacker-controlled host. The remediation for CVE-2026-116578 in version 6.6.0 did not fully address this case. This issue is fixed in version 6.6.1.
-
CVE-2026-121527
A execution with unnecessary privileges vulnerability in Fortinet FortiClientEMS 7.4.3 through 7.4.7, FortiClientEMS 7.4.0 through 7.4.1, FortiClientEMS 7.2 all versions may allow an authenticated local attacker with admin privileges to gain root shell access via CLI commands.
-
CVE-2026-119674
MongoDB Database Tools mongorestore incorrectly URL-decodes an original collection name read from metadata when the corresponding dump filename has been truncated. A database user who can create and populate a suitably encoded collection can cause a later authorized directory restore to write those documents into a different collection that the user cannot modify directly. When both collection names resolve to the same destination, backed-up documents may be omitted; use of --drop can also replace the unintended destination collection. Exploitation requires an operator to restore the affected collection from a directory dump with write access to the destination. This issue affects MongoDB Database Tools versions 100.0.2 through versions before 100.20.1.
-
CVE-2026-99145
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't transfer shrinker pages for pinned bos on purgeable state change Pinned bos have their pages removed from the shrinker's shrinkable / purgeable counts on pin, and added back on unpin according to the bo's purgeable state at that time. However, xe_bo_set_purgeable_shrinker() unconditionally transfers pages between the shrinkable and purgeable counts. If the purgeable state of a pinned bo changes, for example by userspace madvising DONTNEED on a VMA of a bo that is also pinned as a scanout buffer, this underflows one count and, after unpin, leaves the other one permanently inflated. Only update the purgeable flag for pinned bos, and leave the page accounting to unpin. (cherry picked from commit afe6bc012034123fd838328668e609bf57e46bd3)
-
CVE-2026-99119
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: actually validate userq BOs This was supposed to loop over the individual evicted list, as the kernel and always_valid evicted lists were already handled in amdgpu_vm_validate. Without this, BOs that were created and evicted before a userq was made would never end up in an eviction fence rearm. Also add the missing ref to the BO before drm_exec locks and refs it. (cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd)
-
CVE-2026-99108
In the Linux kernel, the following vulnerability has been resolved: ntfs: fix FITRIM range alignment ntfs_trim_fs() aligns the start of a free extent up to the device discard granularity, but derives the discard length by aligning the original extent length down. When the free extent start is not discard-aligned, adding that length to the aligned start can extend the discard past the free extent and into allocated clusters. For example, with 4 KiB clusters and 32 KiB discard granularity, the free extent [4 KiB, 36 KiB) becomes the discard range [32 KiB, 64 KiB), so 28 KiB beyond the free extent may be discarded. Align the absolute end of the free extent down and derive the length from the two aligned endpoints. Skip extents that contain no full discard unit. Reproduced with a 4 KiB-cluster NTFS filesystem on scsi_debug configured for 32 KiB discard granularity and read-zero-after-trim. Before this change, FITRIM zeroed seven allocated 4 KiB clusters following an unaligned 32 KiB hole. With this change, the same data remains intact across FITRIM and remount.
-
CVE-2026-116894
REDAXO before 5.21.5 contains an insufficient session expiration vulnerability that allows attackers to retain account access by keeping the current session and stay-logged-in key valid after a password change. Attackers who obtained a user's session id or stay-logged-in cookie can keep backend access after the password change, via the cookie for up to three months.
-
CVE-2026-112493
A downgrade issue was addressed with additional version checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges.
-
CVE-2026-99017
In the Linux kernel, the following vulnerability has been resolved: riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE errata_probe_ghostwrite() only marks the CPU as vulnerable when it is called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation in ghostwrite_enable_mitigation() only takes effect if the vulnerable state was recorded before the boot alternatives are patched. The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the early alternatives never run, so ghostwrite_state is never set to VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector remains enabled, and sysfs reports "Not affected" on a vulnerable T-Head C9xx CPU. Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the vulnerability is detected in the early boot stage and the default mitigation is applied.
CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.