CVE-20XX-?
agent?

CVEs of 2026.

Every CVE published in 2026 that we hold, ranked by exploit odds.

2,445 CVEs · updated 2026-11-20 22:29 UTC

Reset all
  1. CVE-2026-99657

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99658

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: finish non-blocking interval invalidation on error When an ordinary MMU notifier rejects a non-blocking invalidation, the interval invalidation started beforehand is left unfinished: the caller skips mmu_notifier_invalidate_range_end(). Subsequent interval notifier operations can then wait forever. The only in-tree trigger is nouveau SVM, which uses both notifier types and rejects non-blocking invalidations. Reaping via the OOM reaper or process_mrelease() can therefore leave the GPU fault worker stuck, holding a reference that prevents the dying process's address space and memory from being freed. End the interval invalidation when an ordinary notifier fails a non-blocking invalidation, like mn_itree_invalidate() already does when an interval notifier fails. Make that handling clearer in the documentation of mmu_notifier_invalidate_range_start_nonblock(). Fix generated by an LLM and sent by Josef Bacik in private. [ david: simplify description, update function doc ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99659

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_gather: fix flushing ranges with 4 GiB or larger __tlb_adjust_range() takes the size of the range which has to be flushed as an unsigned int. Its callers, tlb_flush_{pte,pmd,pud,p4d}_range(), get and pass an unsigned long. Consequently, a range that is 4 GiB or larger gets truncated, possibly to 0. On arm64 with hugetlb, a 64k kernel can have 16 GiB hugetlb folios mapped contiguously at the PMD level and flush them when unmapping, and a 16k kernel can flush 64 GiB PUDs through tlb_unshare_pmd_ptdesc(). So at least these two scenarios are affected. Fix it by flushing the proper range instead of the truncated one by properly using "unsigned long" for range_size. Fix generated by an LLM and sent by Josef Bacik in private. [ david: use two-tab indent, simplify description ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-99647

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: split huge PUDs when adjusting VMA boundaries PFN mappings such as VFIO PCI BAR mappings can use PUD leaves while allowing VMA splits at page granularity. However, vma_adjust_trans_huge() only handles PMDs. After faulting a writable PUD-sized VFIO BAR mapping, changing its first page to read-only with mprotect() makes the PMD walk treat the PUD leaf as a PMD table. Applying MADV_DONTFORK to the first PMD-sized chunk leaves the PUD spanning two VMAs: the PMD-aligned boundary skips splitting. Walk the page tables once at each adjusted boundary and split a huge PUD or PMD leaf as needed. Handle PUD leaves even when the boundary is PMD-aligned.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-99651

    In the Linux kernel, the following vulnerability has been resolved: mm/ksm: reset the unstable trees of all nodes Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling merge_across_nodes resets this count to 1, even if per-node roots were previously allocated. So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts while the setting is 1 and continues after switching back to 0 can encounter stale unstable tree roots, resulting in UAF. Only root is allowed to change "merge_across_nodes", and the documented sequence is: "merge_across_nodes setting can be changed only when there are no ksm shared pages in the system: set run 2 to unmerge pages first, then to 1 after changing merge_across_nodes, to remerge according to the new setting." Let's fix it by tracking in ksm_nr_node_ids the actual number of allocated tree roots. remove_all_stable_nodes() and ksm_check_stable_tree() will now scan more tree roots (skipping the empty ones), which is harmless.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-99633

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the CS user fence BO in GTT The CS ioctl hands the GPU the GART address of the user fence BO, but since the BO keeps its own preferred and allowed domains, it no longer makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which warns about non-contiguous VRAM. On navi31, a CS with a user fence in a 4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID: WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393 RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu] Call Trace: <TASK> amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu] amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu] drm_ioctl_kernel+0xac/0x110 [drm] drm_ioctl+0x2c6/0x5b0 [drm] __x64_sys_ioctl+0xa0/0xf0 do_syscall_64+0xa3/0x4d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e and BOs which can't be in GTT at all, like GWS or OA ones of a page in size, pass the checks as well. Only take BOs which can't be anywhere else than in GTT as user fence, which the CS then validates there along with its other BOs. While at it, detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm() returns NULL once the task which created the userptr is gone. v2: only take BOs which can only be in GTT instead of special casing the user fence BO in the validation, use amdgpu_ttm_tt_is_userptr() (Christian) (cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-99634

    In the Linux kernel, the following vulnerability has been resolved: mptcp: do not use Fast Open on MP_JOIN subflows tcp_fastopen_create_child() hands the SYN packet itself to subflow_syn_recv_sock(). For an MP_JOIN request this takes the fatal fallback: the cloned child is destroyed and handed back with drop_req flagged, but tcp_fastopen_create_child() does not check the flag and queues it, so accept() can expose the freed child. MP_JOIN cannot use Fast Open: data on a subflow requires the completed HMAC exchange (RFC 8684, sec. 3.2). Refuse it (only the TFO path passes a SYN skb here) and let tcp_conn_request() fall back to the regular MP_JOIN handshake; also strip the Fast Open cookie from MP_JOIN SYN/ACKs. [ Moving code to avoid clearing TS and consolidating checks. ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-99635

    In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: size receive SKBs from declared payload vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The guest controls the descriptor length and hdr->len independently. A guest can therefore provide a 64 KiB descriptor while declaring a zero payload. The descriptor-sized skb remains queued, rx_bytes and buf_used remain unchanged, and only the fixed queue-entry budget limits retention. This is not a lifetime leak: the skb is freed when dequeued or at socket teardown. Repeating this across connections can nevertheless exhaust host memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for a 262,144-byte receive buffer; a full-payload control retained 265,984 bytes. Vhost previously read hdr->len and allocated pkt->buf from that value. The conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs from the descriptor length, introducing the allocation-accounting mismatch. Copy the header into a stack object and validate hdr->len before allocating the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor capacity no longer determines queued memory. Check payload_len against len - sizeof(hdr) to avoid addition overflow on 32-bit hosts.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-99624

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Report MES ring wait timeouts. Return -ETIMEDOUT when the fence wait before submission expires instead of reporting success without submitting the packet. (cherry picked from commit 34341594a87b4a3f28be41e3e70a4787f02b3d9e)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-99625

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix duplicate dependency fence releases drm_sched_job_add_dependency() consumes its fence reference on success and failure. Do not release the fence again if drm_sched_job_add_dependency() fails. (cherry picked from commit e04f3dfb2071451633e6440a3911a9bb65df9144)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-99627

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12: disallow GFXOFF while updating the SPM VMID gfx_v12_0_update_spm_vmid() does a read-modify-write of RLC_SPM_MC_CNTL over MMIO without keeping GFX powered, unlike gfx11. When GFX is in GFXOFF at that point the update doesn't stick, and with the SPM VMID programmed on submission again, the job of a process with a reserved VMID can still run with the SPM writing through VMID 0. On navi48, after a few other submissions and a VM fault on the same VM, a COPY_DATA of RLC_SPM_MC_CNTL from such a job reads 0 although the update was called for it: $ amd_uapi_regression --run-subtest cs-secure-ib-compute,gem-mapping-info-high-va,gpuvm-fault-high-va,reserved-vmid-spm-vmid amdgpu 0000:03:00.0: [gfxhub] page fault (src_id:0 ring:40 vmid:7 pasid:185) amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA1 (0xe) RLC_SPM_MC_CNTL in the job: 0x00000000 With GFXOFF disallowed around the update it reads the reserved VMID 15. (cherry picked from commit 907aebc5578ae09fa5c0e2f0784201295837e60b)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-99629

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for navi10_ih Port this change to navi10_ih.c: commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts") Setting IH_RB_WPTR to 0 does not clear RB_OVERFLOW if RB_ENABLE is not set. Pulse WPTR_OVERFLOW_CLEAR after RB_ENABLE (and with WPTR_OVERFLOW_ENABLE) so overflow is cleared when interrupts are enabled. (cherry picked from commit 713fb4ab04f4d2af6120f8eb607c5673b2759b38)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99622

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: drop the dma-buf reference when a KFD import fails import_obj_create() takes a reference on the dma-buf for the new kgd_mem, but the error path after validating the BO doesn't drop it. Since the validation reserves the BO interruptibly, an import failing with -ERESTARTSYS leaks the exported BO with its memory, and keeps the module in use. Importing a 64 MiB VRAM BO in a loop while getting SIGUSR1 every 20 us and another thread changes the BO's mappings: INFO: 171821 imports, VRAM used before 65 MiB, after 129 MiB modprobe: FATAL: Module amdgpu is in use. Drop the reference, and free the sync object and the mutex of the kgd_mem as well. With that VRAM usage returns to 65 MiB after the same test. (cherry picked from commit b4d1eca2729840148ff2ea957724ce764ca5a94e)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99609

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Require a buffer of two URBs usx2y_urb_capt_retire() wraps the ring buffer once per packet and usx2y_urb_play_prepare() once per URB of nr_of_packs() packets of up to 50 frames. Both assume that the data fits in the buffer, and the hw constraints only require about two 1 ms periods, so a packet larger than the buffer on capture, or a URB larger than the buffer on playback, violates that assumption. Constrain SNDRV_PCM_HW_PARAM_BUFFER_SIZE in snd_usx2y_pcm_open() to at least two URBs, 2 * nr_of_packs() * 50 frames, for both directions. The bound is in frames and derived from the driver's own packet limit, so it does not read the endpoint, whose altsetting is only selected in prepare. Two URBs rather than one, because the position advances by a URB on playback and only moves when a URB is less than the whole buffer. Keep a guard in usx2y_urb_capt_retire() that drops a packet larger than the buffer, for the case the constraint makes unreachable. With nrpacks above about 163 (S16_LE) or 109 (S24_3LE) the bound exceeds the 64 KiB buffer the substream preallocates (twice that with the preallocation raised to its 128 KiB maximum), so hw_params fails for those module settings. That is intended: the driver cannot be safe with a URB larger than half the largest buffer. Reproduced on 7.3-rc7 with a USB/IP device presenting the US-122 interface layout and 1024-byte packets into a 512-byte capture buffer: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x1285/0x1ac0 Read of size 18446744073709551104 at addr ffff88800e448800 by task vhci_rx/83 Tested on 7.3-rc7 with the same device, S16_LE at 44100 Hz, nrpacks 4, so the bound is 400 frames. A 128-frame capture buffer and a 200-frame playback buffer are refused at hw_params with EINVAL. A 400-frame buffer streams for 30 s in each direction with the position advancing inside the buffer and no KASAN report; the capture guard did not fire. The same 400-frame capture buffer with S24_3LE, which selects altsetting 2 in prepare, streams for 30 s with the same result.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99614

    In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/nvkm: clear use.enabled when subdev init fails On Kepler boards without the video decode falcon firmware installed (msvld/mspdec/msppp), every other VA-API decode attempt binds to an engine with no ucode loaded. The submitted work never completes, which leads to a context switch timeout, a channel recovery that cannot reset the engine, and eviction waits on fences that never signal. The process ends up stuck in D state, or killed by SIGBUS when it touches a buffer evicted after the wait times out: msvld: unable to load firmware data msvld: init failed, -19 fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] vo[5444]: channel 14 killed! WARNING: drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:117 at nvkm_runl_rc+0x2a4/0x3b0 [nouveau] [TTM] Buffer eviction failed WARNING: drivers/gpu/drm/nouveau/nouveau_bo.c:1092 at nouveau_bo_move_ntfy.part.0+0x9b/0x100 [nouveau] Tracing nvkm_subdev_ref() and nvkm_subdev_init_() shows the pattern: a reference taken with enabled=0 runs nvkm_falcon_init(), which returns -ENODEV; the next reference sees enabled=1 and succeeds without running it. Clear use.enabled when init() fails, so that every later reference retries init and fails cleanly. The other readers of use.enabled are fini() handlers that use it to skip teardown, which they now also do after a failed init(). On a GK107 (Quadro K1100M) without video firmware, playing H.264 with mpv --hwdec=auto: without this patch the GPU channel is killed within a minute and mpv hangs; with it, VA-API decoder creation fails, mpv falls back to software decoding, and no faults are logged.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99615

    In the Linux kernel, the following vulnerability has been resolved: l2tp: only return sessions of the given tunnel in l2tp_session_get() Commit 5f77c18ea556 ("l2tp: use IDR for all session lookups") made pppol2tp_connect() and the netlink session commands find sessions with l2tp_session_get(), passing the socket of the tunnel they name. L2TPv3 session IDs are unique per network namespace, except that sessions carried over UDP are only unique per UDP socket, the socket of their tunnel. However, l2tp_v3_session_get() only checks the socket when another session has the same session ID. Otherwise it returns the session, whichever tunnel it belongs to. As of now, a session command that names the wrong tunnel acts on a session of another tunnel, and a PPPoL2TP socket for a second L2TPv3 tunnel fails with EEXIST, because it finds session 0 of the first tunnel. The issue can be reproduced with: ip l2tp add tunnel tunnel_id 3 peer_tunnel_id 3 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5003 udp_dport 6003 ip l2tp add tunnel tunnel_id 4 peer_tunnel_id 4 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5004 udp_dport 6004 ip l2tp add session tunnel_id 3 session_id 7 peer_session_id 7 ip l2tp del session tunnel_id 4 session_id 7 ip l2tp show session Before that commit, the delete fails with "No such device", and session 7 of tunnel 3 is still listed. After that commit, the delete succeeds, and session 7 of tunnel 3 is gone. This patch will make l2tp_session_get() return NULL when the L2TPv3 session it finds does not belong to the given socket. The receive path calls l2tp_v3_session_get() directly and is not changed.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-99602

    In the Linux kernel, the following vulnerability has been resolved: udf: don't let the extent type hide an exhausted free-space table extent udf_table_new_block() takes the first block of the free-space table extent closest to the goal. It keeps that extent's type and length together in goal_elen, subtracts one block, and deletes the extent only if goal_elen then reaches zero. UDF 2.60 section 2.3.7.1 requires the free-space extents of an Unallocated Space Entry to be of type 1 (allocated but not recorded), and mkudffs writes them that way. For such an extent the type bits keep goal_elen non-zero, so taking its last block leaves a type-1 extent of length zero behind, starting at the block after the extent, which is in use. The next allocation that picks this empty extent returns that in-use block. Subtracting a block from 0x40000000 then borrows from the type bits, and the extent becomes type 0 with a length of 2^30 - blocksize: about a gigabyte of "free" space overlapping live metadata, the other table extents and whatever lies behind the partition. From then on blocks are handed out twice, or past the end of the partition. Extents that udf_table_free_blocks() adds are type 0, where the check works, so only tables written by mkudffs or by another implementation are affected. Nothing more than filling such a filesystem is needed: on a fresh 1 MiB "mkudffs --space=unalloctable" image, creating empty files until the partition is full writes file entries over the reserve volume descriptor sequence and the backup anchor, and df then reports a negative amount of used space. On syzbot's images the same double allocation is what the two reports below trip over. In the first, ftruncate() extends a new file with enough hole extents to need a chain of allocation extent descriptors; one AED is placed on another inode's file entry, and a later one is placed on the block of the AED currently being filled, which udf_setup_indirect_aext() zeroes, so __udf_add_aext() finds lengthAllocDescs out of step with its cursor. In the second, an AED is placed past the end of the device, sb_getblk() fails, and the error path of udf_do_extend_file() calls udf_truncate_extents() on an extent list that no longer covers i_size. Keep the type separately from the length, as udf_table_prealloc_blocks() already does.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99603

    In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: use RCU to free endpoint listeners mptcp_pm_nl_create_listen_socket() starts the TCP listener directly instead of going through mptcp_listen(). It consequently misses setting SOCK_RCU_FREE on the parent MPTCP socket. tcp_child_process() can invoke the listener's subflow_data_ready() callback without holding the MPTCP parent lock or a reference to the parent. An authenticated MP_JOIN racing with endpoint teardown can therefore access the parent after its last reference has been dropped. The ADD_ADDR error path can also close an already published listener. Set SOCK_RCU_FREE before __inet_listen_sk() publishes the TCP listener, matching mptcp_listen(). This protects the parent on every subsequent close path, including a failed endpoint addition.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99604

    In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Flush the tile status cache through both the PE and BLT Since commit f232d9ec029c ("drm/etnaviv: fix TS cache flushing on GPUs with BLT engine"), jobs on GPUs with a BLT engine use a BLT command to flush the tile status cache instead of TS_FLUSH_CACHE, which is broken on most of these GPUs. GC7000 r6008/r6009 and GC8200 r6401 are the other way around: TS_FLUSH_CACHE works, but the BLT command does not flush the cache. The vendor driver handles these GPUs using TS_FLUSH_CACHE, but the etnaviv kernel driver has no way to identify them. As a result, dirty tile status cache lines survive the end of a job. They are written back by the next cache flush, using the page table of the job issuing it. If that job belongs to another process, the write goes to the wrong address space. On GC7000 r6009 this causes MMU faults and GPU recoveries blamed on an innocent process. I see around 1100 per run of a multisample depth/stencil test running alongside two other GPU clients. Emit both flushes at the end of every job on GPUs with a BLT engine. Whichever does not work on a given GPU is a no-op. Since dirty lines are only written back once, this costs one additional state load per job.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99606

    In the Linux kernel, the following vulnerability has been resolved: net/smc: don't spin in smc_rx_recvmsg() while a pipe holds spliced data While bytes spliced off the RMB are still in a pipe, recvmsg() waits for the pipe to release them before it copies the data behind them. The path to that wait skips the timeout and signal checks, and smc_rx_wait() returns at once on RCV_SHUTDOWN. With a signal pending, after SHUT_RD, or once the peer closes or shuts down writing, recvmsg() spins on a CPU until the pipe is drained, and SIGKILL cannot stop it. MSG_DONTWAIT and an expired SO_RCVTIMEO wait there too instead of returning -EAGAIN. Check the timeout and signals before that wait, and end it when the pipe releases the data or the connection is killed, not on RCV_SHUTDOWN. A zero-length read returns 0 without waiting for the pipe; a non-blocking one returns -EAGAIN while poll() still reports the socket readable (splice() can still take those bytes). The wait sets SOCKWQ_ASYNC_WAITDATA like smc_rx_wait(), so a byte arriving behind the pipe raises no SIGIO on a reader already asleep for it, and a full barrier orders its wait queue entry before its read of splice_pending, so no wake is lost.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99607

    In the Linux kernel, the following vulnerability has been resolved: ext2: preserve IOMAP_F_DIRTY for extending direct writes ext2_iomap_begin() sets IOMAP_F_DIRTY for writes that may extend i_size, but clears the flag after ext2_get_blocks(). When the write uses an existing mapped block, iomap can then use FUA and skip generic_write_sync(), even though ext2_dio_write_end_io() updates the inode size. An O_DSYNC write can therefore return without persisting the new size. For example, on a FUA-capable device, a 512-byte O_DIRECT|O_DSYNC write at offset 512 into a fsynced one-byte file returns successfully and extends the in-memory size to 1024, while an immediate read of the on-disk inode still shows size 1. An explicit fsync persists the new size. Move setting of IOMAP_F_DIRTY after the initialization.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99608

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99597

    In the Linux kernel, the following vulnerability has been resolved: srcu: Add list_splice_init_srcu() list_splice_init_rcu() makes a list look empty to new readers, waits for the current ones with the given sync function, and only then links the entries into the new list. The sync function takes no argument, so it can wait for RCU readers but not for the readers of an srcu_struct. Passing synchronize_rcu() for a list read under SRCU still builds, but leaves SRCU readers on the entries while the last one's next pointer is moved onto the new list head. nvme_remove_namespaces() does this today. Add list_splice_init_srcu(), which waits for the readers of the given srcu_struct instead.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99598

    In the Linux kernel, the following vulnerability has been resolved: MIPS: sgi-ip32: Leave MACE PCI control alone in config accesses mace_pci_read_config() clears the master abort interrupt enable in the MACE PCI control register around each config read. A register read followed by two register writes can hang CRIME 1.1 under DMA load. Ack master aborts in the error register instead, and follow every write with a read so back-to-back accesses cannot form that sequence.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99600

    In the Linux kernel, the following vulnerability has been resolved: udf: fix preallocation discarding before an empty allocation extent udf_discard_prealloc() finds the last extent of a file by peeking at the next one with udf_next_aext() and stopping when that returns 0. The peek reads into eloc and elen, and the code then uses them as the last extent. But when udf_next_aext() returns 0 they hold no defined value: if the extent list ends in a continuation descriptor that leads to an empty allocation extent, they describe that continuation, i.e. the block of the empty allocation extent, one block long. The kernel creates such lists itself: when udf_delete_aext() removes the only descriptor of the last allocation extent in a list, it leaves that allocation extent empty and the continuation to it in place. If the last extent is a preallocation, udf_discard_prealloc() deletes it with udf_delete_aext(), which finds the following allocation extent empty, so it also removes the continuation and frees that allocation extent's block. udf_discard_prealloc() then frees eloc and elen: that block a second time, instead of the preallocated blocks. On a space bitmap the preallocated blocks leak and the free block count drifts. On an unallocated space table the second free adds a second free extent for the same block, which is later handed out twice: fsx as run by generic/091 and generic/263 ends up with two parts of its test file in one block and reads back bad data. Peek into separate variables, so that eloc and elen keep the last extent that udf_next_aext() returned with 1.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99587

    In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99588

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: only update flags for TT events In the first implementation of the translation table events, it was only possible to announce: * ADD: new locally detected client * DEL: disappeared local client If an ADD event was queued and then a DEL event was queued in the same timeslot, it is valid to destroy both events because nothing actually changed for remode nodes But with commit 3c4f7ab60cc2 ("batman-adv: improve the TT component to support runtime flag changes") and subsequent changes, it could also happen that there are extra ADD events: * ADD: _NEW_ locally detected client * ADD: already existing client with new flags * DEL: disappeared local client The first and the last type of event could in theory still be removed together from the (to be announced) events queue. But if the "update flags" ADD is dropped together with the DEL, it would still leave global translation table of a remote node in the incorrect state - believing that the client didn't disappear. If a detected client was previously announced, a DEL event must only overwrite the "update flags" ADD but the DEL itself must still continue to exist in the (to be anounced) events queue. For now, adjustment of the announced flags is used for everything instead of dropping already queued up events completely. Similarly, a DEL followed by an ADD caused both entries to be deleted. But the new ADD could announce flags changes which were not yet present for the client before it was marked for DELetion. The new ADD must therefore only overwrite the DEL - but still be kept.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99589

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: clear ROAM flag when re-adding a pending local client When a ROAMING_ADV is received for an announced local client, batadv_tt_local_mark_removed() sets BATADV_TT_CLIENT_ROAM, queues a DEL|ROAM change and marks the entry as BATADV_TT_CLIENT_PENDING. If the client sends a frame again before the next TTVN commit, batadv_tt_local_add_existing() only clears the PENDING flag and returns early. The ADD cancels the queued DEL, but the entry keeps the ROAM flag: * batadv_is_my_client() reports the client as not served by this node * batadv_tt_local_client_is_roaming() reroutes unicast frames for it to the node which sent the ROAMING_ADV The ROAM flag is only removed with the next frame of the client. Since BATADV_TT_CLIENT_ROAM is set together with BATADV_TT_CLIENT_PENDING, it has to be cleared also at the same time with BATADV_TT_CLIENT_PENDING when the client roamed back.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99580

    In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: only allocate anon_vma in CoW mappings find_vma_and_prepare_anon() can end up allocating an anon_vma in VMAs that are not CoW mappings, which is wrong. If we have a MAP_SHARED R/O file mapped, we lack VM_SHARED (but do have VM_MAYSHARE) and lack VM_MAYWRITE. While uffd later rejects such mappings (uffd registration requires VM_MAYWRITE, see comment in validate_dst_vma) find_vma_and_prepare_anon() still wrongly allocates an anon vma before it validates the vma. This in turn later confuses copy_page_range()->vma_needs_copy() such that we end up calling copy_hugetlb_page_range() with ranges that actually do not contain *any* per-pagetable information that would require copying, which is the basis for PMD-table sharing in the first place. copy_hugetlb_page_range() should not have to worry about shared PMD tables at all: it doesn't make any sense to copy page tables that are shared, as they can be fully recreated later. Ending up in the function with shareable page tables is the real issue. If a destination PMD table is shared in copy_hugetlb_page_range(), it might get concurrently unshared as we are not holding relevant locks, resulting in us using a page table that is no longer mapped and possibly freed after calling: dst_pte = huge_pte_alloc(dst, dst_vma, addr, sz); To fix it, do not allocate an anon_vma in non-CoW mappings and add a safety guard to copy_hugetlb_page_range(), making sure that we never end up messing with shared PMD tables in there. Before commit 867a43a34ff8a ("userfaultfd: use per-vma locks in userfaultfd operations") we would always validate the VMA before allocating an anon_vma, and consequently never wrongly allocate an anon_vma. As uffd_lock_vma() is part of the same lookup machinery and also contains a misleading VM_SHARED check, change that one as well directly for consistency. A follow-up cleanup will stop taking the hugetlb_vma_lock_read(src_vma) lock in copy_hugetlb_page_range() entirely. Further, the usage of VM_SHARED in userfaultfd code should be cleaned up later to focus on CoW vs. non-CoW mappings.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99576

    In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid bio split on sequential zone In the block layer, bio_split_to_limits() splits a bio if it exceeds any underlying queue limits: 1. queue_max_sectors: Splits bios larger than the transfer limit. This limit is set by the device driver/DMA controller (max_hw_sectors) and device-mapper targets. When flushing dirty pages (governed by VFS writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges contiguous pages into bios up to 512KB (1024 sectors) or more without checking queue_max_sectors, which will be split if the device or DM target enforces a smaller limit. 2. queue_max_segments: Splits bios exceeding scatter-gather segment limits. f2fs allocates bios with up to 256 pages, exceeding the 128-segment limit of DM targets (dm-default-key/dm-crypt) if pages are discontiguous. 3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs, section_size strictly matches zone_size, and block allocation never spans across section boundaries, so bios never cross chunk_sectors. Crucially, when bio_split_to_limits() splits a bio, bio_submit_split() submits the tail half via submit_bio_noacct() before returning the head half to the caller. On a sequential zoned device, this causes the tail bio to arrive at the zone write plug before the head: dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048 != wp_offset 248, len 248 The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing f2fs_stop_checkpoint() and remounting the filesystem read-only: 2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5 2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work 2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace: 2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK> 2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70 2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0 2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0 2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0 2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0 2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70 2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140 2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10 2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70 2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30 2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK> 2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3 To prevent write bios destined for sequential zones from being split: 1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to sequential zone areas. 2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors() for sequential zone areas, so f2fs will not merge beyond the queue limits.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99569

    In the Linux kernel, the following vulnerability has been resolved: f2fs: release a removed xattr node in roll-forward recovery When xattrs shrink enough to fit in the inline xattr area, write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If the file is then fsynced without a checkpoint, only the inode block is written, with i_xattr_nid of 0. Roll-forward recovery starts from the checkpointed inode, whose i_xattr_nid still points to the old xattr node. f2fs_recover_inline_xattr() copies only the inline xattr area, and f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps the stale xattr node: - The node block is never released, and fsck reports "nonzero bytes in xattr space after end of list". - If the inline xattr list ends exactly at the end of the inline area, its terminator is read from the stale node, and the removed xattrs come back after recovery. When the fsynced inode has no xattr node but the checkpointed one has, release the old xattr node as truncate_node() does: check its block address, invalidate the block and drop its node cache, which may still be dirty.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99534

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent stale data from being written by SMB2 WRITE requests Initialize the compatibility byte in request buffers without zeroing the entire allocation. Keep the one-byte compatibility exception for SMB2 messages so valid zero-length WRITE requests remain compatible, and validate the data range in the WRITE handlers against the current compound request before accessing it. This prevents stale request-buffer data from being written to files or sent to IPC pipes.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99535

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent share root removal through empty paths A FileLinkInformation request can supply "/" as the new link name. smb2_get_name() strips the trailing slash and passes an empty string to ksmbd_vfs_kern_path_start_removing(). ksmbd_vfs_path_lookup() resolves an empty pathname as the configured share path, without LOOKUP_BENEATH. With ReplaceIfExists set, smb2_create_link() can therefore remove the share root from its parent before link creation fails. An authenticated client with a writable share and DELETE access to a file can trigger this if the share root is empty and the mapped user has write and search permission on its parent directory. Return -EINVAL for empty pathnames when for_remove is set, before resolving the share path or acquiring removal resources. Ordinary lookups continue to accept empty pathnames for opening the share root.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99537

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: preserve unreadable named streams on open A write-only client can open an existing named stream with FILE_OPEN_IF without permission to read the underlying file. The case-insensitive lookup finds the xattr name, but querying its value length then fails with -EACCES. smb2_set_stream_name_xattr() treats every negative result as a missing stream and replaces the existing xattr with an empty value. A failed xattr list is not proof that the stream is absent either: for example, -ENOMEM can lead to the same empty replacement. Preserve listing errors and create a stream only for -ENOENT or -ENODATA. The latter can occur if the xattr is removed between listing its name and querying its value. Return other lookup errors without changing the stream. A write-only FILE_OPEN now reports access denied instead of name not found. FILE_OVERWRITE_IF and FILE_SUPERSEDE on an unreadable stream also fail instead of appearing to replace it. Stream writes and EOF changes already need to read the old value, so such handles cannot update the stream after opening either.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99538

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: ignore network devices of other namespaces With no interface list configured, ksmbd binds every interface that comes up. ksmbd_netdev_event() does not look at the device's namespace, and create_socket() opens the listener in the namespace of the task raising NETDEV_UP. A container with its own address on a bridge brings up its interface and finds port 445 in its namespace already taken by ksmbd, so an SMB server running inside the container fails with "Address already in use". Interfaces are also matched by name only, so a container's eth0 going down would stop the listener on the host's eth0. Only handle netdev events for devices in init_net.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99539

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix session reference leak on compounded SESSION_SETUP A compound request can place SESSION_SETUP after another command. That earlier command leaves a reference to its session in work->sess. smb2_sess_setup() then overwrites work->sess with the session it looks up or creates, and the dispatcher later puts work->sess only once. The inherited reference is never dropped. That leaks the session, together with its setup connection and socket, and every repeat of the compound leaks another. unreferenced object (size 512): __kmalloc_cache_noprof+0x32c/0x3a0 ksmbd_smb2_session_create+0xf6/0x9c0 [ksmbd] smb2_sess_setup+0xda4/0x6280 [ksmbd] handle_ksmbd_work+0x88c/0x1cb0 [ksmbd] Save the inherited session on entry. After the request has been processed, release it once, but only when smb2_sess_setup() has replaced work->sess with its own session or cleared it. Do this after ksmbd_conn_unlock() so the put does not run under srv_mutex. An error path may instead leave the inherited session in work->sess. Keep it there, so the dispatcher still puts it and the error response is still signed or encrypted with it as before.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99531

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: verify transform SessionId matches the decrypted header When an encrypted request comes in, the decryption key is picked by the SessionId in the transform header, but the request is then authorized under whatever session the decrypted inner header names. Nothing ever compares the two, so on a connection with more than one session a client can get a request decrypted with one session's key and run it as another session. Encrypted requests are exempt from signing too, so a valid AEAD tag is the only proof of session identity, and it is checked against the wrong session. MS-SMB2 says the server must check that the transform SessionId matches the one in the decrypted SMB2 header and treat a mismatch as a protocol error. Add that check in __handle_ksmbd_work() after decryption, before dispatching: the message has to be at least one fixed SMB2 header, the first operation must not set SMB2_FLAGS_RELATED_OPERATIONS and its SessionId must match the transform SessionId, and every following non-related operation in a compound chain must carry the same SessionId. NextCommand offsets must be 8-byte aligned and stay inside the message; the bounds check is done by subtraction so it cannot wrap. When the decrypted payload is a compression transform, the existing decompression step runs first and the decompressed SMB2 message is checked instead, since a compression transform header carries no SessionId.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99492

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration Input subsystem guidelines require that device capabilities are advertised before the input device is registered. The Wacom driver was violating this by advertising the SW_MUTE_DEVICE capability post-registration in wacom_set_shared_values() (and duplicating it in device-specific setup cases). Resolve this by moving the SW_MUTE_DEVICE capability setup to wacom_setup_touch_input_capabilities() for all touch devices that support it. For generic touch devices whose capabilities depend on mute switch usages parsed from a sibling Pen/Pad interface, defer registration with -EPROBE_DEFER until the sibling has parsed its descriptors and initialized shared capabilities.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99497

    In the Linux kernel, the following vulnerability has been resolved: s390/probes: Fix wrong opcode for cgrb fixup The last byte of the cgrb instruction is 0xe4, however the probes code compares against 0xe6. Fix it.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99479

    In the Linux kernel, the following vulnerability has been resolved: fbdev: atmel_lcdfb: Prevent FIFO work after removal The LCD controller IRQ schedules sinfo->task to recover from a FIFO underflow. Probe currently requests the IRQ before initializing the work, so an early interrupt can schedule an uninitialized work item. The probe error path and remove path cancel the work before freeing the IRQ. A FIFO-underflow interrupt can schedule the work again after that cancellation. framebuffer_release() may then free sinfo while the work is still pending. KASAN reported a use-after-free in atmel_lcdfb_task() when an underflow interrupt occurred during removal. With the IRQ freed before the work was cancelled, the same test completed without a kernel diagnostic. Initialize the work before requesting the IRQ. In both cleanup paths, free the IRQ before cancelling the work so that it cannot be scheduled again after cancellation.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99481

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_vhci: Pin module for debugfs file operations An open debugfs file retains its file_operations pointer in the debugfs proxy state. However, force_suspend_fops, force_wakeup_fops, aosp_capable_fops, and force_devcoredump_fops have no .owner set to THIS_MODULE. As a result, full_proxy_open_regular() calls fops_get() which succeeds without taking a reference to the hci_vhci module. When userspace opens any of these debugfs files and later closes the /dev/vhci file descriptor (triggering vhci_release() and debugfs file removal), the open debugfs file descriptor remains valid in userspace. Because the module refcount was not incremented, the hci_vhci module can be unloaded via delete_module (rmmod hci_vhci). When the userspace process subsequently closes the debugfs file descriptor, full_proxy_release() accesses the already unmapped file_operations structure, resulting in a kernel page fault / oops: BUG: unable to handle page fault for address: fffffbfff846f18b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0x8e/0x140 Call Trace: <TASK> __fput+0x39f/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0xc3/0x590 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Modules linked in: ... [last unloaded: hci_vhci(E)] The issue was discovered via manual code audit of drivers/bluetooth/hci_vhci.c and verified on a Linux 7.3-rc6 test VM with CONFIG_BT_VHCI=m by keeping a debugfs file open across controller teardown and module unload. Set .owner = THIS_MODULE on all four file_operations structures so that debugfs pins the module until all file descriptors are closed.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99470

    In the Linux kernel, the following vulnerability has been resolved: media: cx23885: unregister DVB bus when SP2 CI setup fails The DVBSKY S950C, DVBSKY T980C and TechnoTrend CT2-4500 CI paths register the DVB bus before attaching their SP2 CI client. If that client cannot be created, bound, or pinned, the current error path removes the I2C frontend components and only deallocates the frontend list, leaving the registered DVB adapter behind. Removing an I2C demod before unregistering the DVB bus can also expose the use-after-free ordering fixed for the normal remove path. Unregister the DVB bus immediately when SP2 CI setup fails, before the existing I2C client cleanup. The bus helper empties the frontend list, so the later frontend deallocation has nothing left to release. Keep failures from vb2_dvb_register_bus() on the existing cleanup path. Also release an unbound SP2 client and propagate the actual I2C creation or CI registration error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-117490

    The Flatsome WordPress theme before 3.20.13 does not enforce the acting user's publish and post-type restrictions on an AJAX save action, allowing users with a role as low as Contributor to publish their own content and change its post type (for example to a product) without holding the required capabilities.

    Other Web app

    2.7 LOW 0.2% exploit odds No fix listed
  44. CVE-2026-99285

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_byteorder: remove multi-register support 64bit byteorder conversion is broken when several registers need to be converted because the source register array advances in steps for 4 bytes instead of 8: for (i = ... src64 = nft_reg_load64(&src[i]); ~~~~~ u32 *src nft_reg_store64(&dst64[i], Remove the multi-register support, it has other issues as well: Pablo points out that commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") alters semantics: before the loop operated on registers, i.e. for ( ... ) dst32[i] = htons((u16)src32[i]) .. but after the patch it will operate on bytes, which makes this useless to convert e.g. concatenations, which store each compound in its own register. Multi-convert of u32 has one theoretical application: ct mark . meta mark . tcp dport @intervalset Because ct mark and meta mark are host byte order, use with intervals has to convert the byteorder for ct/meta mark value to network byte order (bigendian). nftables emits this: [ meta load mark => reg 1 ] [ byteorder reg 1 = hton(reg 1, 4, 4) ] [ ct load mark => reg 9 ] [ byteorder reg 9 = hton(reg 9, 4, 4) ] ... I.e. two separate calls. Theoretically it could be changed to do: [ meta load mark => reg 1 ] [ ct load mark => reg 9 ] [ byteorder reg 1 = htonl(reg 1, 4, 8) ] ... But then all it would take to change the set to meta mark . tcp dport . ct mark ... and we'd be back to two "byteorder" calls. IOW, support to convert a range of registers is both dysfunctional and dubious. Simplify this: remove the feature. Pablo Neira Ayuso points out that nftables before 1.1.0 can generate incorrect byteorder conversions, see 9fe58952c45a, "evaluate: skip byteorder conversion for selector smaller than 2 bytes" in nftables.git). Affected rulesets fail to load with this change and old userspace due to 'len != size' check.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-97192

    The Secure Custom Fields WordPress plugin before 6.9.8 does not re-apply its field-group location rules when persisting values submitted through the post editor save path, allowing users with contributor-level access and above to write custom fields the site restricted to administrators onto their own posts.

    Other Web app

    2.7 LOW 0.2% exploit odds No fix listed
  46. CVE-2026-97190

    The Advanced Custom Fields (ACF®) WordPress plugin before 6.8.11 does not verify that a user is allowed to edit the target object before writing to it during bidirectional relationship synchronization, allowing users with contributor-level access and above to add or remove a reference to their own object on arbitrary posts, users, or terms they cannot otherwise edit.

    Other Web app

    2.7 LOW 0.2% exploit odds No fix listed
  47. CVE-2026-97191

    The Advanced Custom Fields (ACF®) WordPress plugin before 6.8.11 does not re-apply its field-group location rules when persisting values submitted through the post editor save path, allowing users with contributor-level access and above to write custom fields the site restricted to administrators onto their own posts.

    Other Web app

    2.7 LOW 0.2% exploit odds No fix listed
  48. CVE-2026-99158

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99160

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-99146

    In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed

CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.