CVE-20XX-?
agent?

CVEs of 2026.

Every CVE published in 2026 that we hold, ranked by exploit odds.

2,447 CVEs · updated 2026-11-20 21:57 UTC

Reset all
  1. CVE-2026-99493

    In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Guard domain index uses against speculative bypass The previous array_index_nospec() placement only covered the admin permission check, leaving ap_test_config_usage_domain() and ap_test_config_ctrl_domain() in the CCA path exposed to speculative execution. Move the sanitization to before all permission and config checks in both the CCA and EP11 paths. Hold the sanitized domain value in another variable so that the later use can choose to use either the original value (subject to speculative execution) or the sanitized value (which may in case of AUTOSEL_DOM reflect the wrong value). Before that, check the domain value to be either AUTOSEL_DOM or in range 0...AP_DOMAINS-1 and return with -EINVAL in case this check does not pass.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-93667

    The Virtual L2 receive handler virtual_recv() in subsys/net/l2/virtual/virtual.c ends with a fall-through path meant for a virtual interface that has nothing attached below it: it takes net_if_get_device(iface)->api, treats it as a struct virtual_interface_api, and calls api->recv(iface, pkt). That handler is however also invoked with a non-virtual interface: ethernet_recv() in subsys/net/l2/ethernet/ethernet.c deliberately passes the Ethernet interface so that a tagged frame can be dispatched over the VLAN interfaces attached to it. For an Ethernet interface dev->api is a struct ethernet_api, whose layout only shares the leading struct net_if_api, so the slot read as recv is actually get_config() (default) or get_capabilities() (when CONFIG_NET_STATISTICS_ETHERNET is enabled). The fall-through is reached whenever no attached virtual interface claims the frame - most simply when the VLAN interface owning the frame's tag exists but is administratively down, since net_eth_get_vlan_iface() resolves the tag without checking link state while virtual_recv() skips interfaces that are not up. Any host able to place an 802.1Q-tagged Ethernet frame on the same link can then trigger the mistyped indirect call; no authentication, IP reachability or user interaction is required, because the frame is consumed at L2 before any address check. The resulting call passes a struct net_if where the driver expects a struct device and a struct net_pkt where it expects a struct net_if , with the callee's remaining parameters left as whatever the call site happens to leave in the argument registers. Driver implementations dereference these values: get_capabilities() typically reads dev->config/dev->data (a wild read through a non-pointer field of struct net_if), and get_config() implementations write through the uninitialized struct ethernet_config * argument. The practical impact is undefined behaviour in the network RX path - crashes and uncontrolled memory corruption - plus mis-handling of the packet when a capability bitmask is returned as a net_verdict. The attacker controls neither the corrupted address nor the value written, so this is a denial-of-service and memory-corruption issue rather than a controllable write primitive. The same defective fall-through is reachable through any_recv() in subsys/net/l2/dummy/any/any.c, which passes a dummy interface whose struct dummy_api is shorter than the offset read, producing an out-of-bounds read of the driver's API object followed by an indirect call. The fix drops any packet whose interface is not a Virtual L2 interface, closing both entry points.

    Other OS & kernel

    5.9 MEDIUM 0.2% exploit odds Fix listed
  3. CVE-2026-63183

    OmniAuth is a flexible authentication system utilizing Rack middleware. Prior to 2.2.0, OmniAuth derives provider callback URLs from request-controlled host information when neither a fixed full_host nor framework-level incoming host validation is configured. A remote unauthenticated client can supply a forged Host header, creating a host header injection risk in applications whose web framework does not verify incoming host headers. Applications using appropriately configured Rails host authorization or a fixed full_host are not affected by this path. This issue is fixed in version 2.2.0.

    Other Web app

    6.9 MEDIUM 0.2% exploit odds Fix listed
  4. CVE-2026-61546

    AnkiMCP is an Anki addon that implements an MCP server, enabling AI assistants to interact with the Anki flashcard application. Prior to version 0.21.0, `anki_mcp_server/mcp_server.py` globally disables FastMCP DNS-rebinding protection through `TransportSecuritySettings` with `enable_dns_rebinding_protection=False`, including for the default local Streamable HTTP listener. The defaults in `anki_mcp_server/config.py` enable `http_enabled` on `127.0.0.1:3141`, with an empty `http_path` selecting the root endpoint. No bearer token, API key, session secret, strict `Host` allowlist or strict `Origin` allowlist is enforced before `initialize`, `tools/list` and `tools/call` reach MCP dispatch. A victim who visits a malicious web page while Anki and the listener are running can have browser requests rebound to loopback, allowing the attacker to `initialize` MCP, enumerate tools, read the local collection, and perform enabled non-destructive note/deck creation or updates. The attacker needs neither LAN position nor a local process. Available operations depend on enabled tool filters; destructive tools are hidden unless `enabled_destructive_tools` is opted into, limiting deletion-level impact but not the exposed read/write operations. The reported harness confirms real MCP tool dispatch with substituted Anki bridge responses rather than demonstrating destructive changes to a real collection. Disabling protection for tunnels/proxies also disables it for the normal loopback configuration. This issue is fixed in version 0.21.0.

    Other Browser & mail

    8.8 HIGH 0.2% exploit odds Fix listed
  5. CVE-2026-99133

    In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-41021

    Eaton easyE4 uses an insufficiently strong password policy. An attacker who obtains a password hash, including through CVE-2026-41020, could perform an offline password-guessing attack and potentially recover user credentials.

    Other

    7.5 HIGH 0.2% exploit odds No fix listed
  7. CVE-2026-99043

    In the Linux kernel, the following vulnerability has been resolved: ice: fix metadata_dst refcount handling on representor teardown ice_eswitch_release_repr() uses metadata_dst_free() to release the representor's metadata_dst. metadata_dst_free() directly frees the underlying memory without checking the dst_entry refcount. When ice_eswitch_port_start_xmit() processes a packet, it takes a reference via dst_hold() and attaches the metadata_dst to the skb. If the representor is torn down while packets are still queued on the lower device (e.g. in a qdisc), the metadata_dst is freed while references are still held. Use dst_release() instead, which correctly decrements the refcount and only frees the object when all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. Other drivers sharing this pattern (nfp, airoha, bnxt) already use dst_release() for their metadata_dst lifecycle.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-97193

    The Secure Custom Fields WordPress plugin before 6.9.8 does not verify that a user is allowed to edit the target object before writing to it during bidirectional relationship synchronization, allowing users with contributor-level access and above to add or remove a reference to their own object on arbitrary posts, users, or terms they cannot otherwise edit.

    Other Web app

    2.7 LOW 0.2% exploit odds No fix listed
  9. CVE-2026-107846

    bitcoinjs-lib is a JavaScript Bitcoin library for Node.js and browsers. From 2.3.0 until 5.2.1, 6.1.8, and 7.0.2, fastMerkleRoot pads odd Merkle-tree levels by hashing the final node with itself but does not report adjacent duplicate hashes. The affected block-root verifier was introduced as Block.checkMerkleRoot() alongside Block.calculateMerkleRoot(), while later versions expose validation through checkTxRoots() and __checkMerkleRoot; these validation paths can accept a recomputed root without checking for mutation. A peer can append duplicate transactions so a different transaction list retains the original Merkle root, block header, proof of work, and block identifier. Consumers that rely on block-root validation, including explorers, exchange indexers, or SPV clients, can process a duplicated transaction twice or blacklist the shared block hash and reject the honest block. This issue is fixed in versions 5.2.1, 6.1.8, and 7.0.2.

    Other Library

    9.3 CRITICAL 0.2% exploit odds Fix listed
  10. CVE-2026-10756

    TRO600 contains a vulnerability that allows an authenticated attacker to bypass network access restrictions and access services intended to be reachable only from localhost. By leveraging port forwarding, an attacker can interact with locally bound ports and services, resulting in unauthorized access to sensitive functionality and confidential information, and causing availability impact.

    Other

    7.7 HIGH 0.2% exploit odds No fix listed
  11. CVE-2026-76534

    In Splunk Enterprise for Windows versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user that holds a role with the edit_user capability could create multiple user accounts that share the same user directory. This could expose user-specific configuration between those accounts, let one account modify configuration used by another account, or disrupt features that depend on separate user directories. The vulnerability is caused by improper validation of usernames before Splunk Enterprise performs Windows filesystem operations. Windows removes trailing periods from directory names, so distinct usernames can resolve to the same user directory. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.

    Other OS & kernel Splunk Enterprise

    4.7 MEDIUM 0.2% exploit odds No fix listed
  12. CVE-2026-120813

    An issue in MongoDB Server's client-side field-level encryption (CSFLE) schema processing component allows encryption metadata to be silently dropped during schema parsing under certain conditions. A party who can deliver a specially crafted schema to a user's CSFLE client may cause sensitive data intended for encryption to be stored in plaintext, bypassing confidentiality protections. Exploitation requires the ability to deliver the malicious schema to the user's client, such as through a man-in-the-middle position or an untrusted server.

    Other Server

    8.2 HIGH 0.2% exploit odds No fix listed
  13. CVE-2026-121841

    Other issue in Firefox for iOS. This vulnerability was fixed in Firefox for iOS 160.0.

    Other Browser & mail

    7.3 HIGH 0.2% exploit odds Fix listed
  14. CVE-2026-118187

    The PublishPress Revisions: Duplicate Posts, Submit, Approve and Schedule Content Changes WordPress plugin before 4.3.1 does not verify that a user requesting to duplicate or revise a post has access to that specific post, only that they can edit posts of that type, allowing users with contributor-level access and above to duplicate another user's private, draft, pending or scheduled post into one they own and read its full content.

    Other Web app

    2.7 LOW 0.2% exploit odds No fix listed
  15. CVE-2026-99192

    In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: unshare the skb before writing the control block bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99174

    In the Linux kernel, the following vulnerability has been resolved: ext4: free the sbi after a grace period ext4_get_link() follows a symlink that keeps its target in a data block in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT). That reads s_mount_state in the ASSERT() of ext4_getblk() and again in ext4_es_lookup_extent(), and the lookup bumps the extent status hit or miss counter, all through sb->s_fs_info. ext4_put_super() destroys those counters, clears sb->s_fs_info and frees the sbi without waiting for a grace period. A pathwalk that is still in ext4_get_link() when the last reference to the mount goes away then dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu counters. With a pathwalk held up in ext4_get_link() while the last reference goes away: KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:ext4_getblk+0xf0/0x640 Call Trace: <TASK> ext4_get_link+0x26c/0x410 pick_link+0xf96/0x1780 step_into_slowpath+0x9b8/0x1250 path_lookupat+0x484/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. Keep sb->s_fs_info and free the sbi together with the extent status counters after a grace period. Split the counters out of ext4_es_unregister_shrinker() for that. The shrinker still gets wasted in ext4_put_super(), the counters go with the sbi.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-98900

    In the Linux kernel, the following vulnerability has been resolved: xen/gntalloc: validate grant count before allocation gntalloc_ioctl_alloc() allocates the grant-id array before checking whether the requested count fits within the global grant limit. Counts above that limit cannot succeed, so reject them before the user-controlled allocation reaches kcalloc(). Use a subtraction-based check while holding gref_mutex so adding the requested count cannot wrap. Also cast the count before advancing the per-file index so the page-size multiplication is performed in 64-bit arithmetic.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-98902

    In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-98898

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized When DPM is turned off with the amdgpu.dpm=0 module parameter, the thermal work queue isn't initialized so we shouldn't schedule any work on it. (cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-98885

    In the Linux kernel, the following vulnerability has been resolved: ima: return error early if file xattr cannot be changed During early boot, the filesystem is read-only and any changes to xattrs are not allowed. This fails in case of ext4 because changing xattr starts an ext4 transaction which fails with the following warning. WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561 CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4] Call Trace: __ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] __vfs_setxattr+0x9a/0xd0 __vfs_setxattr_noperm+0x76/0x1f0 ima_appraise_measurement+0x23e/0xe40 ima_d_path+0x5a/0xd0 process_measurement+0xb29/0xc40 ? copy_from_kernel_nofault+0x21/0xe0 ? fscrypt_file_open+0xc0/0xe0 ? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126 ? __bpf_prog_exit+0x23/0xd0 ? __bpf_tramp_exit+0xd/0x50 ? bpf_trampoline_6442530367+0x9f/0xea ima_file_check+0x57/0x80 security_file_post_open+0x50/0xf0 path_openat+0x493/0x1650 do_filp_open+0xc7/0x170 Detect the state of the file early and return the error.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-98891

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-98876

    In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-98877

    In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-98879

    In the Linux kernel, the following vulnerability has been resolved: isofs: handle set_blocksize failures isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-98881

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: remove stale rcu_barrier() in br_multicast_dev_del() This rcu_barrier() came from a time call_rcu() calls were used in net/bridge/br_multicast.c. Now kfree_rcu() is there, we can remove this problematic rcu_barrier() which causes extreme RTNL pressure in many syzbot reports. INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537. task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337 Workqueue: netns cleanup_net Call Trace: <TASK> [<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483 [<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411 [<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline] [<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529 [<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75 [<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline] [<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline] [<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline] [<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153 [<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888 [<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459 [<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157 [<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599 [<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] [<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-98873

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-121649

    Use of cache containing sensitive information vulnerability in Apache Tomcat's ExpiresFilter caused by the filter removing cache-control header fields set by the authentication layer. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.27, from 10.1.0-M1 through 10.1.61, from 9.0.0.M1 through 9.0.123. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.1 through 7.0.109. Older unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.29, 10.1.62 or 9.0.124, which fix the issue. Note: Tomcat 11.0.28 was not released

    Other Web app Apache Software Foundation Apache Tomcat

    unscored 0.2% exploit odds Fix listed
  28. CVE-2026-131224

    In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in data that populates the Endpoint Changes report. Another user who holds the "pci_analyst" role could later click a corresponding table row. Splunk Enterprise Security could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who clicked the row. The commands could access or modify data available to that user. The vulnerability is possible because the Endpoint Changes report does not treat dynamic report values as literal search values when it builds table-row drilldown searches. For more information see Reports (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/user-manual/8.7/using-the-splunk-app-for-pci-compliance/reports) and Configure users and roles (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-the-app/configure-users-and-roles) in the Splunk documentation.

    Other Splunk App For PCI Compliance

    3.7 LOW 0.2% exploit odds No fix listed
  29. CVE-2026-99787

    In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Select the frequency-invariance callback per CPU cppc_cpufreq_cpu_fie_init() initializes deferred work only for CPUs whose feedback counters use PCC. However, if any CPU in a shared policy uses PCC, it installs the PCC tick callback for the entire policy. With FIE enabled, a non-PCC CPU then queues an uninitialized irq_work and can call a NULL function pointer when that work runs. Choose the frequency-invariance callback separately for each CPU using the recorded work-initialization state. Processor removal can unpublish the CPC descriptor before callback registration, so querying its counter transport again can incorrectly select direct reads for a PCC CPU. Register the callbacks after all counter initialization has completed, so a failed initial read for an online CPU cannot leave a partially registered policy. PCC CPUs use their initialized deferred work, while non-PCC CPUs read their own counters directly from the tick.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99751

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix skb_pull() BUG in __bpf_redirect_neigh() The issue: This is a follow-up to the short link-layer header fixes from Eric. After vlan pop_eth, a privileged SCHED_ACT BPF program can call bpf_skb_change_head(skb, 1, 0) and then bpf_redirect_neigh(). __bpf_redirect_neigh() calls skb_pull(skb, sizeof(*ethh)) after checking only that mac_header < network_header. Nothing verifies that the MAC header is long enough, that it is linear, or that the IP header the redirect goes on to read is linear either. A SCHED_ACT BPF program can do: bpf_skb_change_head(skb, 1, 0); bpf_redirect_neigh(lo, NULL, 0, 0); after vlan pop_eth. The skb then has mac_len == 1 and only one byte of linear data; skb_pull(ETH_HLEN) trips the skb->len < skb->data_len BUG in __skb_pull(): kernel BUG at ./include/linux/skbuff.h:2839! RIP: skb_pull+0x40/0x50 Call Trace: skb_do_redirect -> packet_xmit -> packet_sendmsg Kernel panic - not syncing: Fatal exception in interrupt The v4 and v6 paths read ip_hdr() and ipv6_hdr() as soon as the MAC header is gone. On the AF_PACKET frame below that leaves headlen == 0 after the pull, so the network header sits at skb->tail and the route lookup reads ip4h->protocol, ip4h->saddr and ip4h->daddr past the linear area. The Fix: Use skb_network_offset(), which is the MAC header span, instead of skb->mac_len. mac_len is zero for locally generated tc egress and netkit packets, while the span still rejects the one-byte header produced by pop_eth + bpf_skb_change_head(skb, 1, 0). The single check also covers the mac_header >= network_header test it replaces. Use pskb_may_pull() to make the Ethernet header linear before it is read or pulled, and to make the IP header linear in both the v4 and the v6 path before ip_hdr()/ipv6_hdr() is read. The header pointers are taken after the pull, since pskb_may_pull() may reallocate skb->head. Conditions to recreate the bug: On x86-64 with 4 KiB pages, enable CONFIG_PACKET, CONFIG_BPF_SYSCALL, CONFIG_NET_SCH_INGRESS, CONFIG_NET_CLS_MATCHALL, CONFIG_NET_ACT_VLAN and CONFIG_NET_ACT_BPF. Run as root with BPF loading, network administration and raw-packet privileges. Bring lo up and attach a SCHED_ACT program that calls bpf_skb_change_head(skb, 1, 0), then returns bpf_redirect_neigh(skb->ifindex, NULL, 0, 0): ip link set lo up tc qdisc add dev lo clsact tc filter add dev lo egress matchall action vlan pop_eth pipe \ action bpf object-file neigh_chghead.o section action Send an untagged ETH_P_IP frame of ETH_HLEN + 8192 bytes through an AF_PACKET/SOCK_RAW socket bound to lo, without PACKET_VNET_HDR or PACKET_QDISC_BYPASS. Use a unicast destination MAC. The sender's skb has a 14-byte linear Ethernet prefix and a fragmented payload; pop_eth removes that prefix and change_head restores only one linear byte. The unfixed neighbor redirect then tries to pull 14 bytes and BUGs. Sending the same frame without pop_eth and change_head leaves the IP header in the frags, which is the route lookup reading past skb->tail.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99683

    In the Linux kernel, the following vulnerability has been resolved: vduse: fix VA/PA confusion in the coherent page fault path vduse_domain_get_coherent_page() assumes that iotlb entries above bounce_size were installed by vduse_domain_alloc_coherent(), so it treats map->addr as a physical address. But vduse registers with use_va = true, and when the device is bound to vhost_vdpa, vhost_vdpa_va_map() stores a userspace virtual address in map->addr, which vduse_domain_set_map() then copies into the same iotlb. A process holding the domain file descriptor across a rebind can therefore fault in an arbitrary physical page with read/write access, ignoring the entry permissions. Additionally, since the domain file mmap lacks VM_IO, the domain file itself can be mapped and passed to vhost_vdpa_va_map(), producing self-referential entries that bypass the coherent path check. To fix, only translate entries whose backing file is the domain file itself in vduse_domain_get_coherent_page(), reject such entries in vduse_domain_set_map() since only external mappings should be imported, and set VM_IO on the domain file mmap so vhost_vdpa_va_map() refuses to map it in the first place.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99579

    In the Linux kernel, the following vulnerability has been resolved: mm/shmem: honour F_SEAL_EXEC when an ACL is set The owner of a memfd sealed with F_SEAL_EXEC can still change its execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL, this lets an unprivileged owner make a non-executable memfd executable, bypassing vm.memfd_noexec=2. simple_set_acl() updates i_mode directly, bypassing the seal check in shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode() in include/linux/memfd.h. Fix generated by an LLM and sent by Chris Mason in private. [ david: use common helper; simplify description ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-129932

    The MongoDB Java driver applies its DNS seedlist domain restriction to a record value that is later re-interpreted differently when the connection target is parsed, so the name that is checked and the name that is used can differ. An unauthenticated party who can set or forge the DNS service record for the seed domain in a connection string can cause the driver to direct its session to an unrelated host and to complete certificate verification against that host instead. This may result in unintended disclosure of application data and of configured database credentials, and in unintended content being returned to the application as query results.

    Other OS & kernel MongoDB Java Driver

    9.1 CRITICAL 0.2% exploit odds No fix listed
  34. CVE-2026-99287

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: Zero out sring pointers on unmap If xenvif_map_frontend_data_rings() fails when a ring is already mapped, it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the ring pointers unchanged. xenvif_connect_data()'s cleanup path calls xenvif_disconnect_queue() which in turn calls xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the pointers a second time. Zero out the ring pointers after they are unmapped to avoid this issue. This is XSA-532

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99286

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: Fix XenBus connection failure cleanup xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues under rcu_read_lock. We need to unpublish vif->num_queues before synchronize_net to ensure that readers that come afterwards will not read a non-zero vif->num_queues and attempt to access invalid queues. This is the same cleanup algorithm as used in backend_disconnect and added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus disconnect"). This is XSA-531

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99278

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99261

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction It fixes both the move overflow and the eviction fence add for evicting these per-vm BOs.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99257

    In the Linux kernel, the following vulnerability has been resolved: gpio: shared: gracefully handle no-device lookup of shared GPIOs We use platform lookup tables for shared GPIOs. This mechanism needs a struct device to work so fwnode-based lookup with no device associated currently causes a NULL-pointer deference. Adding this functionality will require a larger rework and it has never worked anyway so add a check that allows the kernel to gracefully handle this situation with an error ahead of implementing that functionality as a new feature.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99259

    In the Linux kernel, the following vulnerability has been resolved: soc/tegra: pmc: Fix uninitialised clock rate For legacy 32-bit Tegra devices, the warning in the tegra_pmc_enter_suspend_mode() function is being triggered because the early_pmc->rate variable is never configured and hence, always 0. This issue started occurring after updating the PMC driver to create the PMC context dynamically which causes the 'rate' to be set in the new dynamic context, but missed updating the rate in the early PMC context. Fix this by initialising the early_pmc->rate variable for 32-bit Tegra devices when the rate for the PMC context is initialised. [[email protected]: move assignment to existing #ifdef block]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99260

    In the Linux kernel, the following vulnerability has been resolved: ntfs: fix resident conversion in ntfs_new_attr_flags When setting sparse/compressed flags on a resident attribute, the function skipped the resident-to-non-resident conversion and terminated.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99221

    In the Linux kernel, the following vulnerability has been resolved: keys/trusted_keys: return immediately after TPM unseal failure trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation fails. If pcrlock() succeeds, its return value overwrites the unseal error, causing key instantiation to succeed. Return immediately when unseal fails to preserve the original error.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99175

    In the Linux kernel, the following vulnerability has been resolved: fsnotify: prevent mark additions during connector teardown fsnotify_destroy_marks() keeps a reference to its current mark while it drops conn->lock to destroy the mark. This stabilizes the forward-walk cursor, but does not prevent a new mark from being inserted before it. For example, an inotify watch re-added after IN_IGNORED sorts before the old, detached mark for the same group. The walk can miss the replacement and then detach the entire connector from the object. The replacement is still on its group's marks_list and, for inotify, in the watch IDR. The group mutex no longer protects the connector's object from disappearing. An unprivileged fdinfo read racing the final detach can consequently call igrab(NULL): BUG: KASAN: null-ptr-deref in igrab+0x24/0x100 Write of size 4 at addr 0000000000000148 Call Trace: igrab+0x24/0x100 inotify_show_fdinfo+0x1dc/0x5e0 seq_show+0x397/0x690 Set a DESTROYING flag under conn->lock before starting the walk, and reject new marks on that connector with -ENOENT. The existing add-mark error paths undo the temporary group-list entry and the backend's watch allocation. Do not wait for teardown while holding the group mutex, which the destroyer needs. Once the old connector is detached, an add can install a fresh connector as before. This closes the insertion race for all object types using the common connector teardown, without changing the mark reference or SRCU lifetime rules.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99132

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous xfs_trans_commit(), which flushes the CIL push workqueue internally. If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to lock these buffers to fail them, causing a deadlock: setlabel: holds buf lock -> flush_workqueue(xfs-cil) CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf) Remove the xfs_trans_bhold() calls so that commit releases the buffer locks normally. After the sync commit, re-acquire the buffers via mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99126

    In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99067

    In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99052

    In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99038

    In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99031

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: avoid recursive multicast port cleanup br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99034

    In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-sprd: disable runtime PM on remove sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does not perform the corresponding runtime PM cleanup. The probe failure path disables runtime PM before disabling the clocks, but the normal remove path directly disables clocks that are also managed by the runtime PM callbacks. If the device is runtime suspended, those clocks may already be disabled. Resume the device before removal, disable runtime PM and drop the temporary runtime PM reference before disabling the clocks. This issue was found by manual code inspection.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-99037

    In the Linux kernel, the following vulnerability has been resolved: dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed

CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.