CVE-20XX-?
agent?

CVEs of 2026.

Every CVE published in 2026 that we hold, ranked by exploit odds.

2,447 CVEs · updated 2026-11-20 21:42 UTC

Reset all
  1. CVE-2026-99174

    In the Linux kernel, the following vulnerability has been resolved: ext4: free the sbi after a grace period ext4_get_link() follows a symlink that keeps its target in a data block in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT). That reads s_mount_state in the ASSERT() of ext4_getblk() and again in ext4_es_lookup_extent(), and the lookup bumps the extent status hit or miss counter, all through sb->s_fs_info. ext4_put_super() destroys those counters, clears sb->s_fs_info and frees the sbi without waiting for a grace period. A pathwalk that is still in ext4_get_link() when the last reference to the mount goes away then dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu counters. With a pathwalk held up in ext4_get_link() while the last reference goes away: KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:ext4_getblk+0xf0/0x640 Call Trace: <TASK> ext4_get_link+0x26c/0x410 pick_link+0xf96/0x1780 step_into_slowpath+0x9b8/0x1250 path_lookupat+0x484/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. Keep sb->s_fs_info and free the sbi together with the extent status counters after a grace period. Split the counters out of ext4_es_unregister_shrinker() for that. The shrinker still gets wasted in ext4_put_super(), the counters go with the sbi.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-98900

    In the Linux kernel, the following vulnerability has been resolved: xen/gntalloc: validate grant count before allocation gntalloc_ioctl_alloc() allocates the grant-id array before checking whether the requested count fits within the global grant limit. Counts above that limit cannot succeed, so reject them before the user-controlled allocation reaches kcalloc(). Use a subtraction-based check while holding gref_mutex so adding the requested count cannot wrap. Also cast the count before advancing the per-file index so the page-size multiplication is performed in 64-bit arithmetic.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-98902

    In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-98898

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized When DPM is turned off with the amdgpu.dpm=0 module parameter, the thermal work queue isn't initialized so we shouldn't schedule any work on it. (cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-98885

    In the Linux kernel, the following vulnerability has been resolved: ima: return error early if file xattr cannot be changed During early boot, the filesystem is read-only and any changes to xattrs are not allowed. This fails in case of ext4 because changing xattr starts an ext4 transaction which fails with the following warning. WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561 CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4] Call Trace: __ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] __vfs_setxattr+0x9a/0xd0 __vfs_setxattr_noperm+0x76/0x1f0 ima_appraise_measurement+0x23e/0xe40 ima_d_path+0x5a/0xd0 process_measurement+0xb29/0xc40 ? copy_from_kernel_nofault+0x21/0xe0 ? fscrypt_file_open+0xc0/0xe0 ? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126 ? __bpf_prog_exit+0x23/0xd0 ? __bpf_tramp_exit+0xd/0x50 ? bpf_trampoline_6442530367+0x9f/0xea ima_file_check+0x57/0x80 security_file_post_open+0x50/0xf0 path_openat+0x493/0x1650 do_filp_open+0xc7/0x170 Detect the state of the file early and return the error.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-98891

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-98876

    In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-98877

    In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-98879

    In the Linux kernel, the following vulnerability has been resolved: isofs: handle set_blocksize failures isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-98881

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: remove stale rcu_barrier() in br_multicast_dev_del() This rcu_barrier() came from a time call_rcu() calls were used in net/bridge/br_multicast.c. Now kfree_rcu() is there, we can remove this problematic rcu_barrier() which causes extreme RTNL pressure in many syzbot reports. INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537. task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337 Workqueue: netns cleanup_net Call Trace: <TASK> [<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483 [<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411 [<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline] [<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529 [<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75 [<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline] [<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline] [<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline] [<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153 [<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888 [<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459 [<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157 [<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599 [<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] [<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-98873

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-99287

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: Zero out sring pointers on unmap If xenvif_map_frontend_data_rings() fails when a ring is already mapped, it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the ring pointers unchanged. xenvif_connect_data()'s cleanup path calls xenvif_disconnect_queue() which in turn calls xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the pointers a second time. Zero out the ring pointers after they are unmapped to avoid this issue. This is XSA-532

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99286

    In the Linux kernel, the following vulnerability has been resolved: xen-netback: Fix XenBus connection failure cleanup xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues under rcu_read_lock. We need to unpublish vif->num_queues before synchronize_net to ensure that readers that come afterwards will not read a non-zero vif->num_queues and attempt to access invalid queues. This is the same cleanup algorithm as used in backend_disconnect and added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus disconnect"). This is XSA-531

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99278

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99261

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction It fixes both the move overflow and the eviction fence add for evicting these per-vm BOs.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99257

    In the Linux kernel, the following vulnerability has been resolved: gpio: shared: gracefully handle no-device lookup of shared GPIOs We use platform lookup tables for shared GPIOs. This mechanism needs a struct device to work so fwnode-based lookup with no device associated currently causes a NULL-pointer deference. Adding this functionality will require a larger rework and it has never worked anyway so add a check that allows the kernel to gracefully handle this situation with an error ahead of implementing that functionality as a new feature.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-99259

    In the Linux kernel, the following vulnerability has been resolved: soc/tegra: pmc: Fix uninitialised clock rate For legacy 32-bit Tegra devices, the warning in the tegra_pmc_enter_suspend_mode() function is being triggered because the early_pmc->rate variable is never configured and hence, always 0. This issue started occurring after updating the PMC driver to create the PMC context dynamically which causes the 'rate' to be set in the new dynamic context, but missed updating the rate in the early PMC context. Fix this by initialising the early_pmc->rate variable for 32-bit Tegra devices when the rate for the PMC context is initialised. [[email protected]: move assignment to existing #ifdef block]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99260

    In the Linux kernel, the following vulnerability has been resolved: ntfs: fix resident conversion in ntfs_new_attr_flags When setting sparse/compressed flags on a resident attribute, the function skipped the resident-to-non-resident conversion and terminated.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99221

    In the Linux kernel, the following vulnerability has been resolved: keys/trusted_keys: return immediately after TPM unseal failure trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation fails. If pcrlock() succeeds, its return value overwrites the unseal error, causing key instantiation to succeed. Return immediately when unseal fails to preserve the original error.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99175

    In the Linux kernel, the following vulnerability has been resolved: fsnotify: prevent mark additions during connector teardown fsnotify_destroy_marks() keeps a reference to its current mark while it drops conn->lock to destroy the mark. This stabilizes the forward-walk cursor, but does not prevent a new mark from being inserted before it. For example, an inotify watch re-added after IN_IGNORED sorts before the old, detached mark for the same group. The walk can miss the replacement and then detach the entire connector from the object. The replacement is still on its group's marks_list and, for inotify, in the watch IDR. The group mutex no longer protects the connector's object from disappearing. An unprivileged fdinfo read racing the final detach can consequently call igrab(NULL): BUG: KASAN: null-ptr-deref in igrab+0x24/0x100 Write of size 4 at addr 0000000000000148 Call Trace: igrab+0x24/0x100 inotify_show_fdinfo+0x1dc/0x5e0 seq_show+0x397/0x690 Set a DESTROYING flag under conn->lock before starting the walk, and reject new marks on that connector with -ENOENT. The existing add-mark error paths undo the temporary group-list entry and the backend's watch allocation. Do not wait for teardown while holding the group mutex, which the destroyer needs. Once the old connector is detached, an add can install a fresh connector as before. This closes the insertion race for all object types using the common connector teardown, without changing the mark reference or SRCU lifetime rules.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99132

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous xfs_trans_commit(), which flushes the CIL push workqueue internally. If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to lock these buffers to fail them, causing a deadlock: setlabel: holds buf lock -> flush_workqueue(xfs-cil) CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf) Remove the xfs_trans_bhold() calls so that commit releases the buffer locks normally. After the sync commit, re-acquire the buffers via mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99126

    In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99067

    In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99052

    In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99038

    In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99031

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: avoid recursive multicast port cleanup br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99034

    In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-sprd: disable runtime PM on remove sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does not perform the corresponding runtime PM cleanup. The probe failure path disables runtime PM before disabling the clocks, but the normal remove path directly disables clocks that are also managed by the runtime PM callbacks. If the device is runtime suspended, those clocks may already be disabled. Resume the device before removal, disable runtime PM and drop the temporary runtime PM reference before disabling the clocks. This issue was found by manual code inspection.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99037

    In the Linux kernel, the following vulnerability has been resolved: dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99022

    In the Linux kernel, the following vulnerability has been resolved: regulator: ltc3676: don't read the write-only HRST and CLIRQ registers HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST triggers a hard reset of the chip and writing CLIRQ clears the interrupt; reading them returns nothing useful, and the read itself fires the command. The result is that a plain register dump resets the board: cat /sys/kernel/debug/regmap/2-003c/registers walks every readable register, hits HRST, and the board reboots. Split the callback back in two so HRST and CLIRQ stay writable but are no longer readable. The readable range is left unchanged (LTC3676_BUCK1 ... LTC3676_IRQSTAT).

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99024

    In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99007

    In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99008

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99009

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99000

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix shrinker accounting double-subtraction on nested external pins xe_bo_pin_external() and xe_bo_unpin_external() support nested pins, since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count refcount rather than a boolean. However, the shrinker accounting calls xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked unconditionally on every pin_external()/unpin_external() call, instead of only on the transition into and out of the pinned state. An external BO (dma-buf) can be pinned more than once while already pinned, for example when it has multiple attachments/importers, each independently calling xe_bo_pin_external(). Each such nested pin subtracts the BO's pages from the shrinker's accounting again, even though the BO's pages were already removed from consideration by the first pin. Symmetrically, each nested unpin adds them back again before the BO is actually unpinned. This desynchronizes the shrinker's page and object counts from reality, and since they are declared as signed long but interpreted as unsigned long in xe_shrinker_count(), the underflow can turn into an enormous shrinkable/purgeable page count, causing the shrinker to be invoked excessively under memory pressure. Guard the accounting calls with the same pin-count transition checks already used to guard the pinned_link list maintenance, so accounting is only updated on the outermost pin and the final unpin. While centralizing this logic into xe_bo_account_pin()/ xe_bo_account_unpin(), also close a second, related accounting gap affecting imported dma-bufs. For an imported bo's ttm_tt, xe's ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's ttm_tt_populate() wrapper unconditionally marks the tt as populated on driver-hook success, so ttm_tt_is_populated() still reports true for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted ttm_tt_is_populated() as a proxy for "these pages are accounted for by the shrinker", and would subtract/add pages for such a tt that were never added in the first place, again underflowing the shrinker's counts. This is reachable today via xe_bo_pin_external(), and would have become newly reachable via the fb-pin path once this patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so fix it here rather than in a later patch, to avoid a commit in this series that introduces the regression before fixing it. Skip the accounting for imported bos, using the same EXTERNAL && !EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate() use to decide whether to act, via a new xe_ttm_bo_is_imported() helper (hoisted up from its only prior use site). v2: - Fix the critical issue caught by Sashiko AI review: the pin-count transition check introduced here was still bypassed by the fb-pin path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a stale pinned_link entry and a permanent shrinker accounting leak when the fb-unpin performed the true last unpin. Addressed in a separate follow-up patch in this series rather than folded in here, since it is a distinct bug with its own Fixes: tag. - Drop the unneeded local "last_unpin" variable in xe_bo_unpin_external(), restoring the original inline bo->ttm.pin_count == 1 check; it was a no-op rename not used by any of the new accounting helpers, and was going to be deleted again by the follow-up patch anyway. v3: - Exclude imported dma-bufs from the pin/unpin shrinker accounting, fixing another underflow caught by Sashiko AI review. - Add a short comment on the backup-object pin site noting it's already populated/accounted at pin time, addressing (as a false-positive clarification, no code fix needed) a separate Medium-severity accounting-leak concern also caught by Sashiko AI ---truncated---

    Other OS & kernel

    unscored 0.2% exploit odds Fix listed
  35. CVE-2026-98992

    In the Linux kernel, the following vulnerability has been resolved: namespace: don't copy an unmounted mount tree may_copy_tree() accepts a mount whose root is an nsfs or pidfs file before it checks whether that mount is mounted. This exception exists for nsfs and pidfs mounts. They are part of no mount namespace so neither check_mnt() nor is_mounted() would let them through and bind-mounting a nsfsfd or a pidfd wouldn't work. Problem is that exception also admits a bind mount of such a file when it was lazily unmounted and is only kept alive by a file descriptor: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --rbind /proc/self/fd/3 /tmp/y With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted mount. It copies every mount that stayed attached to it as well. So if you have a bunch of overmounts over the nsfsfd or the pidfd the whole unmounted stack is copied. That's a bug. So refuse to walk an unmounted tree. Copying its root alone stays possible. So a bind mount of a namespace that is gone can still be recreated from a file descriptor on the old one. The file descriptor pins that mount and its root and __has_locked_children() only reads the direct children which don't leave the parent's list without namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL and are still walked. Copying an unmounted tree recursively fails with EINVAL.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-98984

    In the Linux kernel, the following vulnerability has been resolved: dcache: don't put a mountpoint on a dentry that's being removed rmdir(), unlink() and rename() call dont_mount() on the victim and then detach_mounts() with the victim's inode locked. do_lock_mount() takes the inode lock of the mountpoint and checks cant_mount() so a mount can't show up after detach_mounts(). But attach_recursive_mnt() makes a second mountpoint for the root of the source mount so that the mounts already located at the destination can be put on top of it. No inode is locked for that one and d_set_mounted() only refuses a dentry that is unlinked. Between detach_mounts() and d_delete() the victim is still hashed: rmrace: b passed dont_mount() and detach_mounts(), sleeping T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 () T1: rmdir(/tmp/plcant/d/b) = 0 errno 0 109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw 108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw A bind mount of the directory that's being removed is moved beneath an existing mount while the rmdir() is located between the two calls. The mount ends up on the removed directory and nothing will ever detach it. Check cant_mount() in d_set_mounted() as well. dont_mount() raises the flag under d_lock before detach_mounts() runs so either the mountpoint is set first and detach_mounts() finds the mount or the flag is seen and the mount is refused.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-98933

    In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-98936

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-124671

    The Burst Statistics WordPress plugin before 3.7.5 does not enforce a shared report's date range on the analytics it serves to the report's share link, allowing anyone holding the link to read the report's statistics for any period the site retains rather than the period the report was shared for.

    Other Web app

    4.3 MEDIUM 0.2% exploit odds No fix listed
  40. CVE-2026-0004

    A transient execution vulnerability in some AMD processors may allow an attacker with the ability to execute code on the system to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries.

    Other

    5.7 MEDIUM 0.2% exploit odds No fix listed
  41. CVE-2026-124935

    Undefined behavior in the WebRTC: Networking component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7.

    Other Browser & mail

    unscored 0.2% exploit odds Fix listed
  42. CVE-2026-123129

    The Event Tickets Manager for WooCommerce WordPress plugin before 1.6.0 does not validate the ticket-type price sent to one of its unauthenticated AJAX actions when the referenced product has no ticket types configured, and stores the submitted price site-wide, where it is applied to the next event ticket added to any cart, allowing unauthenticated visitors to buy event tickets at an arbitrary price, including for free. This is due to an incomplete fix of CVE-2026-34898.

    Other Web app

    5.3 MEDIUM 0.2% exploit odds No fix listed
  43. CVE-2026-118188

    The PublishPress Revisions: Duplicate Posts, Submit, Approve and Schedule Content Changes WordPress plugin before 4.3.1 does not verify that a user is permitted to read a given post before returning its content through its revision-comparison feature, allowing any authenticated user, including a Subscriber, to read the title, content and excerpt of any other user's private, draft, pending, scheduled or trashed post.

    Other Web app

    4.3 MEDIUM 0.2% exploit odds No fix listed
  44. CVE-2026-119259

    The All-in-One Video Gallery WordPress plugin before 5.1.0 does not check the type, status or ownership of the target post before writing its view count and duration meta, allowing unauthenticated visitors to create or change that meta on any post, including private and draft posts, and to inflate the view count without limit.

    Other Web app

    5.3 MEDIUM 0.2% exploit odds No fix listed
  45. CVE-2026-121190

    UI misrepresentation in Extensions in Google Chrome prior to 157.0.8103.38 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted Chrome extension. (Chromium security severity: Low)

    Other Browser & mail Google Chrome

    4.3 MEDIUM 0.2% exploit odds Fix listed
  46. CVE-2026-97350

    Securepoint SSL VPN Client v2 on Windows contains vulnerabilities in the handling of OpenVPN configurations and proxy settings that allow non-privileged local users to influence operations performed with NT AUTHORITY\SYSTEM privileges. Two attack vectors have been identified: * Improper authorization of configuration checksum updates: The privileged service does not properly validate the authorization of connecting clients when updating the checksum of an OpenVPN configuration. This allows a non-privileged local user to modify an OpenVPN configuration and set a valid checksum without administrator privileges. The modified configuration is subsequently processed with NT AUTHORITY\SYSTEM privileges. * Argument injection via proxy settings: The client does not properly validate or sanitize proxy settings before passing them as arguments to OpenVPN. A non-privileged local user can inject additional arguments through the proxy settings, influencing the execution of OpenVPN with NT AUTHORITY\SYSTEM privileges. This attack vector does not require direct communication with the privileged service or modification of the protected OpenVPN configuration.

    Other Network gear

    6.9 MEDIUM 0.2% exploit odds No fix listed
  47. CVE-2026-119289

    Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.10.0, the @zuke/gh githubWorkflow(...) gate correlates a dispatched workflow run using only a display-title marker that is visible in the workflow run list and can be copied by another dispatcher. In configurations where the external workflow repository grants workflow_dispatch permission to a party not equally trusted by the releasing repository, an attacker can dispatch a run with the marker and cause the gate to adopt its conclusion without verifying the event, ref, or creation window. A passing substituted run can authorize an unvalidated release, while a failed or cancelled run can block a valid release, and the persisted adopted run ID preserves the substitution across build resume. This issue is fixed in version 1.10.0.

    Other

    7.1 HIGH 0.2% exploit odds Fix listed
  48. CVE-2026-99159

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx() On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[] shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma() dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader() writes two such indices into meta->buffers[], which rb_cpu_meta_valid() would reject on the next boot, discarding the previous boot's trace. A CPU's sub-buffer array starts after its meta header and the nr_subbufs integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx() inverts that calculation but skips only the integers, not the header, so its base is one sub-buffer low whenever the omitted header size crosses the alignment boundary. Invert the calculation with rb_subbufs_from_meta() rather than repeating it. rb_range_buffer() maps an index back to an address through the same helper, so the two directions can no longer disagree.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99026

    In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-98993

    In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set.

    Other OS & kernel

    7.8 HIGH 0.2% exploit odds No fix listed

CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.