CVEs of 2026.
Every CVE published in 2026 that we hold, ranked by exploit odds.
-
CVE-2026-44628
An unauthenticated attacker can crash the worklist server with a single crafted query when the server has a valid Called AE Title / storage directory, the expected lockfile, and at least one matching worklist record.
-
CVE-2026-128129
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, aiohttp buffers all additional connection data received while a request marked for upgrade, such as a WebSocket handshake, is being handled, without a size limit or flow control. A remote attacker can stream data behind an upgrade request to a handler that does not immediately accept or reject the upgrade and cause unbounded memory consumption. This issue is fixed in version 3.14.4.
-
CVE-2026-71217
A flaw was found in iperf3. A remote attacker can exploit this vulnerability by sending crafted control-channel JSON with oversized numeric parameters, such as `parallel` and `len`, which are not properly validated by the server. This improper input validation can lead to excessive stream and thread creation, as well as large buffer allocations, causing resource exhaustion. Consequently, this can result in a Denial of Service (DoS) on the affected iperf3 server.
-
CVE-2026-63016
Uncontrolled Resource Consumption vulnerability in Apache InLong. Users could affect operational configuration or allow upload of non-official packages. This issue affects Apache InLong: from 2.0.0 before 2.4.0. Users are advised to upgrade to Apache InLong's 2.4.0 or cherry-pick [1] to solve it. [1] https://github.com/apache/inlong/pull/12095 https://github.com/apache/inlong/pull/11732
-
CVE-2026-78048
A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service. Root Cause: In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process. Affected Scenarios: Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3462 Note: The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0).
-
CVE-2026-69218
Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, When Ember receives an HTTP/2 HEADERS or PUSH_PROMISE frame without END_HEADERS, H2Connection buffers the header block and subsequent CONTINUATION fragments without a size bound. A remote peer can keep an incomplete block open and exhaust heap memory before request decoding, affecting an ember-server or ember-client configured with withHttp2. The remediation tracks accumulated size against SETTINGS_MAX_HEADER_LIST_SIZE derived from EmberServerBuilder.maxHeaderSize or EmberClientBuilder.maxResponseHeaderSize, sends GOAWAY when the limit is exceeded, and applies receiveHeadersTimeout to incomplete blocks. This issue is fixed in versions 0.23.35 and 1.0.0-M47.
-
CVE-2026-69210
Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, WebSocket FrameTranscoder.bodyLength rejects extended payload lengths above Integer.MAX_VALUE but permits negative 64-bit lengths. A remote client that completes a WebSocket handshake through an Ember server can send such a frame, causing the decoder to return an empty frame without advancing its input. The decode loop then runs indefinitely, pins a worker at full CPU, and grows an ArrayBuffer without bound, resulting in denial of service. This issue is fixed in versions 0.23.35 and 1.0.0-M47.
-
CVE-2026-69203
Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, An Ember server with HTTP/2 enabled through withHttp2 does not enforce SETTINGS_MAX_CONCURRENT_STREAMS for peer-created streams. One unauthenticated connection can open an unbounded number of streams, each retaining per-stream state until heap exhaustion. The same unchecked allocation is reachable in an ember-client through server-initiated PUSH_PROMISE frames because enablePush is not enforced. This issue is fixed in versions 0.23.35 and 1.0.0-M47.
-
CVE-2026-69202
Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember’s HTTP/2 flow-control window is replenished according to bytes received from the network rather than bytes consumed by the application, while each stream stores DATA in an unbounded channel. A hostile peer can therefore send a body faster than a slow or non-draining application consumes it, retaining payloads in heap on an ember-server or ember-client configured with withHttp2. The patch bounds the per-stream H2Connection body channel so application consumption applies backpressure. This issue is fixed in versions 0.23.35 and 1.0.0-M47.
-
CVE-2026-69213
Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember HTTP/2 serializes outbound frames through one unbounded queue consumed by writeLoop. When the peer stops reading, an unauthenticated HTTP/2 client can continue sending PING, SETTINGS, or DATA frames that cause Ember to enqueue acknowledgments or WINDOW_UPDATE frames faster than the writer drains them, exhausting heap memory on a server built with withHttp2. The shared behavior also affects an ember-client connected to a hostile HTTP/2 server, and the patch replaces the unbounded path with bounded, backpressured outbound queues. This issue is fixed in versions 0.23.35 and 1.0.0-M47.
-
CVE-2026-69209
Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The shared WebSocket decoder permits unbounded message buffering because defragmentation accumulates fragments without a limit and FrameTranscoder accepts declared lengths up to Int.MaxValue. A remote client that completes a WebSocket handshake against an http4s-blaze-server or http4s-ember-server endpoint can exhaust server memory with oversized frames or fragmented messages. The patched decoder applies a configurable 64 MiB default limit to individual frames and defragmented messages through EmberServerBuilder.withMaxWebSocketMessageSize. This issue is fixed in versions 0.23.35 and 1.0.0-M47.
-
CVE-2023-54393
PocketMine-MP versions before 4.20.5 contain a denial of service vulnerability in LoginPacket JSON parsing due to improper validation in the JsonMapper dependency. Attackers can send malformed JSON structures in LoginPacket to crash the server.
-
CVE-2022-51017
PocketMine-MP versions before 3.26.5 and 4.0.5 fail to validate the length of skin data fields submitted by players, allowing uncapped values to exceed the 32767 byte TAG_String limit. Attackers can submit oversized skin data fields like skinID or geometryName to trigger exceptions during NBT data serialization, causing server crashes.
-
CVE-2026-73493
Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42.
-
CVE-2026-73232
ffuf is a fast web fuzzer written in Go. Prior to 2.2.0, ffuf allows a malicious target server to cause an out-of-memory denial of service because the response size guard in pkg/runner/simple.go checks only the compressed Content-Length while io.ReadAll reads gzip, brotli, deflate, transparently decompressed, or chunked response bodies without a decompressed-size bound. This issue is fixed in version 2.2.0.
-
CVE-2026-26307
Gitea versions before 1.25.5 do not enforce a timeout on git grep searches, allowing expensive searches to consume server resources.
-
CVE-2026-122096
Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java. Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected. This issue affects Apache DataSketches Java: through 9.0.0. Users are recommended to upgrade to version 9.1.0, which fixes the issue.
-
CVE-2026-120367
Allocation of Resources Without Limits or Throttling vulnerability in Apache Axis2/Java. The JSON message builders, including the Gson, Moshi and HTTP/2 variants, buffered the entire request body with no size limit, so an unauthenticated caller could exhaust server memory with a large JSON request. Version 2.0.2 bounds JSON request bodies with the configurable jsonMaxRequestSize parameter. This issue affects Apache Axis2/Java: through 2.0.1. Users are recommended to upgrade to version 2.0.2, which fixes the issue.
-
CVE-2026-119052
llama.cpp b2877 before b11935 contains an uncaught exception vulnerability in the ggml-rpc server that allows unauthenticated remote attackers to crash the rpc-server by sending oversized message lengths. After the HELLO handshake, attackers can send a command such as SET_TENSOR with a length above std::vector::max_size(), triggering an uncaught std::length_error that aborts the process and denies service to all clients.
-
CVE-2026-68497
jackson-databind binds a JSON string to a javax.xml.datatype.Duration or javax.xml.datatype.XMLGregorianCalendar field by passing the raw string verbatim to DatatypeFactory.newDuration(value) or newXMLGregorianCalendar(value) in CoreXMLDeserializers.Std._deserialize. These deserializers are registered by default with no opt-in, so a plain ObjectMapper or JsonMapper with no polymorphic typing and no special configuration reaches this path. The XML Schema lexical grammar permits numeric components of arbitrary length, which the JDK materializes through the native BigInteger(String) and BigDecimal(String) constructors, both quadratic in digit count. Because the digits sit inside a JSON string token rather than a JSON number token, jackson-core's StreamReadConstraints.maxNumberLength guard never applies; jackson's own NumberDeserializers call validateIntegerLength or validateFPLength before parsing a stringified number, but the XML datatype deserializer omits that pre-check. An unauthenticated attacker can therefore submit a single request of a few megabytes, such as a Duration value consisting of the letter P followed by several million digits and the letter Y, and force tens of seconds to several minutes of single-threaded CPU work; a handful of concurrent requests can saturate a server's worker threads. This affects com.fasterxml.jackson.core:jackson-databind from 2.0.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2.
-
CVE-2026-29168
Allocation of Resources Without Limits or Throttling vulnerability in Apache HTTP Server's mod_md via OCSP response data. This issue affects Apache HTTP Server: from 2.4.30 through 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue.
-
CVE-2026-85450
MOOS core-moos through 10.4.0 contains a denial of service vulnerability in the MOOSDB HTTP server that creates unbounded connections and threads without limits. Attackers can open many connections and send endless header data to exhaust server threads and memory, causing service unavailability.
-
CVE-2026-42005
An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.
-
CVE-2026-32770
Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.19 and 8.6.43, a remote attacker can crash the Parse Server by subscribing to a LiveQuery with an invalid regular expression pattern. The server process terminates when the invalid pattern reaches the regex engine during subscription matching, causing denial of service for all connected clients. The fix in 9.6.0-alpha.19 and 8.6.43 validates regular expression patterns at subscription time, rejecting invalid patterns before they are stored. Additionally, a defense-in-depth try-catch prevents any subscription matching error from crashing the server process. As a workaround, disable LiveQuery if it is not needed.
-
CVE-2026-9071
IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.
-
CVE-2026-41636
Uncontrolled Recursion vulnerability in Apache Thrift Node.js bindings This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.
-
CVE-2026-61387
In Eclipse Milo versions 1.0.0 through 1.1.4, monitored-item quota accounting is not exception-safe: if item creation fails with an unchecked error, the server-global reservation is not restored. Deeply nested PubSub ExtensionObjects in a `CreateMonitoredItems` event filter can trigger a `StackOverflowError` during decoding, allowing an unauthenticated remote client to exhaust a finite global monitored-item quota and prevent all clients from creating new monitored items until restart. Existing monitored items and other server functions remain unaffected.
-
CVE-2026-58218
A flaw was found in Samba's internal DNS server where unauthenticated TKEY registration requests were added to the TKEY name cache before being rejected. A remote, unauthenticated attacker can exploit this behavior by sending a large number of TKEY requests with arbitrary names, exhausting the cache and evicting legitimate TKEY entries. This can prevent legitimate TSIG authentication for signed DNS queries, resulting in a denial of service.
-
CVE-2026-30946
Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior 9.5.2-alpha.2 and 8.6.15, an unauthenticated attacker can exhaust Parse Server resources (CPU, memory, database connections) through crafted queries that exploit the lack of complexity limits in the REST and GraphQL APIs. All Parse Server deployments using the REST or GraphQL API are affected. This vulnerability is fixed in 9.5.2-alpha.2 and 8.6.15.
-
CVE-2026-123865
An unauthenticated HTTP/2 client can permanently leak Node.js server memory and file descriptors. If a peer triggers a protocol error, for example an oversized frame header, while the session is already shutting down, nghttp2 tears the session down internally but Node.js never notices, leaving a dangling session: the socket stays in CLOSE_WAIT and all of Node.js's HTTP/2 state for that connection is held in memory indefinitely, with no further cost to the attacker. The attacker can start the shutdown remotely by sending GOAWAY(NO_ERROR), so it is reliable against default HTTP/2 servers. It is an incomplete-fix case of CVE-2026-48937: that fix detected nghttp2 internal terminations by watching for GOAWAY sent while not shutting down, but missed terminations that arrive while the session is already shutting down. This vulnerability affects Node.js 26.x, 24.x, and 22.x.
-
CVE-2026-55241
Checkmate is an open-source, self-hosted tool designed to track and monitor server hardware, uptime, response times, and incidents in real-time with beautiful visualizations. Prior to 3.9.1, the public POST /api/v1/auth/register route in server/src/api/routes/authRoutes.ts passes multipart profileImage uploads through in-memory Multer parsing before registration validation, without file-size, file-count, or MIME-type limits in server/src/api/middleware/upload.ts. An unauthenticated attacker can submit concurrent oversized files that are buffered before invalid registration or invite-token checks reject the request, exhausting memory and crashing or destabilizing the backend. This issue is fixed in version 3.9.1.
-
CVE-2026-0966
A flaw was found in libssh. The API function `ssh_get_hexa()` is vulnerable to a denial of service when processing zero-length input. This can be exploited remotely by an attacker during GSSAPI (Generic Security Service Application Program Interface) authentication if the server's logging verbosity is set to `SSH_LOG_PACKET (3)` or higher. Successful exploitation could lead to a self-Denial of Service of the per-connection daemon process.
-
CVE-2026-33256
An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.
-
CVE-2026-68540
fulgur converts untrusted HTML/CSS into PDF, commonly on a server that processes input supplied by many tenants. From version 0.6.0 to before version 0.33.0, quadratic style-list reprocessing during containing-block resolution for absolutely-positioned pseudo-elements cause denial of service. This issue has been patched in version 0.33.0.
-
CVE-2026-105659
Uncontrolled Resource Consumption vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin HTTP/2 stream processes indefinitely via a trickle of small WINDOW_UPDATE frames. A stream whose response outruns the connection or stream send window blocks until the peer grants more window, and each block carries a 15 second deadline. Both deadlines restart whenever the peer makes partial progress. Bandit.HTTP2.Connection.finish_data/5 re-queues a partially advanced send in pending_sends with a fresh expires_at, so every WINDOW_UPDATE on stream 0, and every SETTINGS frame, resets the clock. Bandit.HTTP2.Stream.send_data/3 recurses on each stream WINDOW_UPDATE and re-arms a fresh after read_timeout. A peer that grants a few bytes every few seconds keeps the blocked stream process, its Plug state and any resource it holds mid-response alive for as long as it keeps dripping, and repeats this across streams and connections to exhaust server processes and memory. The two paths are independent. The stream-level block is reached on its own by widening the connection window with a large WINDOW_UPDATE on stream 0 and shrinking the per-stream window with a small SETTINGS_INITIAL_WINDOW_SIZE, so closing only the connection-level path leaves it exploitable. This issue affects bandit: from 1.4.0 before 1.13.0.
-
CVE-2026-115448
Uncontrolled recursion in Apache ZooKeeper. The server serializes its data tree to a snapshot by recursing one stack frame per znode level, with no depth bound. A client permitted to create znodes (the default root ACL is open) can build a chain of nested znodes deep enough that taking a snapshot exhausts the JVM stack and kills the snapshot thread; sizes stay within jute.maxbuffer, so existing limits do not prevent it. This is a denial of service that becomes persistent: on restart the server rebuilds the deep tree from its transaction log and fails again while taking the startup snapshot, so it does not return to service, and recovery can entail data loss. The same log affects a leader and its followers, so it can spread across an ensemble. This issue affects Apache ZooKeeper 3.8.0 through 3.8.7 and 3.9.0 through 3.9.6. Users are recommended to upgrade to 3.8.8 or 3.9.7, which fix the issue. As a workaround, use ACLs and authentication to restrict znode creation rather than relying on the default open root ACL.
-
CVE-2026-68523
`fulgur` converts untrusted HTML/CSS into PDF, commonly on a server that processes input supplied by many tenants. In versions prior to 0.19.0, a body-direct child whose CSS-resolved height greatly exceeds the page height was sliced into one fragment per page with no upper bound. This is fixed in 0.19.0. A `MAX_PAGES` cap bounds the slice loop — halting it even for a `+inf` height — and non-finite layout heights are sanitized so they can no longer drive the loop. As a workaround, validate or constrain untrusted CSS (in particular `height` / `vh` on body-level elements) before passing HTML to fulgur.
-
CVE-2026-68537
`fulgur` converts untrusted HTML/CSS into PDF, commonly on a server that processes input supplied by many tenants. In versions prior to 0.19.0, a body-direct child whose CSS-resolved height greatly exceeds the page height was sliced into one fragment per page with no upper bound. This is fixed in version 0.19.0. A `MAX_PAGES` cap bounds the slice loop — halting it even for a `+inf` height — and non-finite layout heights are sanitized so they can no longer drive the loop. As a workaround, validate or constrain untrusted CSS (in particular `height` / `vh` on body-level elements) before passing HTML to fulgur.
-
CVE-2026-63460
Vendure is an open-source headless commerce platform. Prior to 3.6.5, the public Shop GraphQL API allows an unauthenticated caller to supply a catastrophically backtracking pattern through StringOperators.regex. packages/core/src/service/helpers/list-query-builder/parse-filter-params.ts passes the raw pattern to the REGEXP implementation registered by packages/core/src/service/helpers/list-query-builder/list-query-builder.ts, and better-sqlite3 and sqljs evaluate it synchronously in the Node.js event loop. ShopProductsResolver.products is publicly reachable, so one nested-quantifier pattern can block request processing and make the storefront and admin API unavailable, while repeated requests can sustain denial of service. PostgreSQL and MySQL or MariaDB deployments do not execute this regular expression in the Node.js event loop. This issue is fixed in version 3.6.5.
-
CVE-2026-86201
PocketMine-MP before 5.41.1 contains a denial of service vulnerability in LoginPacket processing where large or complex structures in unknown clientData JWT properties cause excessive logging without sanitization. Attackers can send crafted LoginPackets with deeply nested or massive object structures to trigger out-of-memory conditions and crash the server.
-
CVE-2023-54390
PocketMine-MP versions before 5.3.1 and 4.23.1 contain a denial of service vulnerability in LoginPacket JSON parsing due to improper null value handling in arrays. Attackers can send malformed JSON with unexpected null elements in LoginPacket to crash the server.
-
CVE-2026-86075
n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the OAuth Dynamic Client Registration endpoint bounded redirect_uris but accepted arbitrarily large client_name and grant_types values. An unauthenticated remote caller could repeatedly persist oversized values in oauth_clients and exhaust database storage. The affected validation is in packages/cli/src/modules/oauth-server/oauth-server.service.ts, including MAX_CLIENT_NAME_LENGTH and MAX_GRANT_TYPES. This issue is fixed in versions 2.37.7 and 2.38.2.
-
CVE-2026-16497
NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause excessive iteration. A successful exploit of this vulnerability might lead to denial of service.
-
CVE-2026-73561
Hub is a Node.js WebSocket server and client with added features. Prior to 0.2.16, every incoming unauthenticated WebSocket connection triggers loadDefaultConnectionEventListeners to call requestClientId, which calls rpc.send for the get-client-id action and pushes a request into RPC.requests. The RPC.waitForReply function starts a setInterval polling loop every 10 milliseconds that is cleared only after a matching reply; if the client remains silent and closes, the timer and pending request stay allocated because the socket close path does not cancel them. Repeated connections therefore cause unbounded timers and heap entries, exhausting CPU and memory and making the server unavailable. This issue is fixed in version 0.2.16.
-
CVE-2026-56018
JavaScript::Minifier::XS versions before 0.16 for Perl leak memory on every call to minify(), allowing unbounded memory growth. In JsMinify (XS.xs) the cleanup frees only the NodeSet structures and never the per-token contents buffers allocated in JsSetNodeContents; JsDiscardNode unlinks nodes without freeing their contents. Each token's contents buffer is therefore leaked on every call, and the two early returns taken when the node list is empty leak the whole NodeSet. A long-lived process that minifies repeatedly, such as an asset pipeline or a server-side minifier endpoint, grows in memory without bound until it exhausts available memory and is killed, causing denial of service.
-
CVE-2026-58389
Allocation of Resources Without Limits or Throttling vulnerability in Apache Thrift Rust bindings. This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue.
-
CVE-2026-45713
Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch.
-
CVE-2026-91866
A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
-
CVE-2026-91865
A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue.
-
CVE-2026-42440
OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader Versions Affected: before 1.9.5 before 2.5.9 before 3.0.0-M3 Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.
CVE records published in 2026 (ids starting CVE-2026-), sorted by how likely they are to be exploited.