CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2024-8953
In composiohq/composio version 0.4.3, the mathematical_calculator endpoint uses the unsafe eval() function to perform mathematical operations. This can lead to arbitrary code execution if untrusted input is passed to the eval() function.
-
CVE-2023-28354
An issue was discovered in Opsview Monitor Agent 6.8. An unauthenticated remote attacker can call check_nrpe against affected targets, specifying known NRPE plugins, which in default installations are configured to accept command control characters and pass them to command-line interpreters for NRPE plugin execution. This allows the attacker to escape NRPE plugin execution and execute commands remotely on the target as NT_AUTHORITY\SYSTEM.
-
CVE-2025-37138
An authenticated command injection vulnerability exists in the command line interface binary of AOS-10 GW and AOS-8 Controllers/Mobility Conductor operating system. Exploitation of this vulnerability requires physical access to the hardware controllers. A successful attack could allow an authenticated malicious actor with physical access to execute arbitrary commands as a privileged user on the underlying operating system.
-
CVE-2025-7862
A vulnerability has been found in TOTOLINK T6 4.1.5cu.748_B20211015 and classified as critical. Affected by this vulnerability is the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component Telnet Service. The manipulation of the argument telnet_enabled with the input 1 leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2025-37095
A directory traversal information disclosure vulnerability exists in HPE StoreOnce Software.
-
CVE-2025-59374
"UNSUPPORTED WHEN ASSIGNED" Certain versions of the ASUS Live Update client were distributed with unauthorized modifications introduced through a supply chain compromise. The modified builds could cause devices meeting specific targeting conditions to perform unintended actions. Only devices that met these conditions and installed the compromised versions were affected. The Live Update client has already reached End-of-Support (EOS) in October 2021, and no currently supported devices or products are affected by this issue.
-
CVE-2025-46427
Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.
-
CVE-2025-29209
TOTOLINK X18 v9.1.0cu.2024_B20220329 has an unauthorized arbitrary command execution in the enable parameter' of the sub_41105C function of cstecgi .cgi.
-
CVE-2024-57014
TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "recHour" parameter in setScheduleCfg.
-
CVE-2025-12596
A security vulnerability has been detected in Tenda AC23 16.03.07.52. Affected is the function saveParentControlInfo of the file /goform/saveParentControlInfo. Such manipulation of the argument Time leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.
-
CVE-2024-14009
Nagios XI versions prior to 2024R1.0.1 contain a privilege escalation vulnerability in the System Profile component. The System Profile feature is an administrative diagnostic/configuration capability. Due to improper access controls and unsafe handling of exported/imported profile data and operations, an authenticated administrator could exploit this vulnerability to execute actions on the underlying XI host outside the application's security scope. Successful exploitation may allow an administrator to obtain root privileges on the XI server.
-
CVE-2025-60964
OS Command Injection vulnerability in EndRun Technologies Sonoma D12 Network Time Server (GPS) F/W 6010-0071-000 Ver 4.00 allows attackers to execute arbitrary code, cause a denial of service, gain escalated privileges, gain sensitive information, and possibly other unspecified impacts.
-
CVE-2025-60965
OS Command Injection vulnerability in EndRun Technologies Sonoma D12 Network Time Server (GPS) F/W 6010-0071-000 Ver 4.00 allows attackers to execute arbitrary code, cause a denial of service, gain escalated privileges, gain sensitive information, and possibly other unspecified impacts.
-
CVE-2023-53952
Dotclear 2.25.3 contains a remote code execution vulnerability that allows authenticated attackers to upload malicious PHP files with .phar extension through the blog post creation interface. Attackers can upload files containing PHP system commands that execute when the uploaded file is accessed, enabling arbitrary code execution on the server.
-
CVE-2020-36902
UBICOD Medivision Digital Signage 1.5.1 contains an authorization bypass vulnerability that allows normal users to escalate privileges by manipulating the 'ft[grp]' parameter. Attackers can send a GET request to /html/user with 'ft[grp]' set to integer value '3' to gain super admin rights without authentication.
-
CVE-2024-50562
An Insufficient Session Expiration vulnerability [CWE-613] in FortiOS SSL-VPN version 7.6.0, version 7.4.6 and below, version 7.2.10 and below, 7.0 all versions, 6.4 all versions may allow an attacker in possession of a cookie used to log in the SSL-VPN portal to log in again, although the session has expired or was logged out.
-
CVE-2024-46437
A sensitive information disclosure vulnerability in the Tenda W18E V16.01.0.8(1625) web management portal allows an unauthenticated remote attacker to retrieve sensitive configuration information, including WiFi SSID, WiFi password, and base64-encoded administrator credentials, by sending a specially crafted HTTP POST request to the getQuickCfgWifiAndLogin function, bypassing authentication checks.
-
CVE-2025-64444
Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in NCP-HG100 1.4.48.16 and earlier. If exploited, a remote attacker who has obtained the authentication information to log in to the management page of the product may execute an arbitrary OS command with root privileges.
-
CVE-2025-9566
There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file. Binary-Affected: podman Upstream-version-introduced: v4.0.0 Upstream-version-fixed: v5.6.1
-
CVE-2025-26340
A CWE-321 "Use of Hard-coded Cryptographic Key" in the JWT signing in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to bypass the authentication via crafted HTTP requests.
-
CVE-2025-20055
OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340 provided by Y'S corporation. An attacker who can access the affected product may execute an arbitrary OS command.
-
CVE-2025-7696
The Integration for Pipedrive and Contact Form 7, WPForms, Elementor, Ninja Forms plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.2.3 via deserialization of untrusted input within the verify_field_val() function. This makes it possible for unauthenticated attackers to inject a PHP Object. The additional presence of a POP chain in the Contact Form 7 plugin, which is likely to be used alongside, allows attackers to delete arbitrary files, leading to a denial of service or remote code execution when the wp-config.php file is deleted.
-
CVE-2025-52903
File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit files. In versions on the 2.x branch prior to 2.33.10, the Command Execution feature of File Browser only allows the execution of shell command which have been predefined on a user-specific allowlist. Many tools allow the execution of arbitrary different commands, rendering this limitation void. The concrete impact depends on the commands being granted to the attacker, but the large number of standard commands allowing the execution of subcommands makes it likely that every user having the `Execute commands` permissions can exploit this vulnerability. Everyone who can exploit it will have full code execution rights with the uid of the server process. Version 2.33.10 contains a check for whether a command is allowed when using shell.
-
CVE-2025-34172
In pfSense CE /usr/local/www/haproxy/haproxy_stats.php, the value of the showsticktablecontent parameter is displayed after being read from HTTP GET requests. This can enable reflected cross-site scripting when the victim is authenticated.
-
CVE-2025-8831
A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function remoteManagement of the file /goform/remoteManagement. The manipulation of the argument portNumber leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-8826
A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This vulnerability affects the function um_rp_autochannel of the file /goform/RP_setBasicAuto. The manipulation of the argument apcli_AuthMode_2G/apcli_AuthMode_5G leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-8824
A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setRIP of the file /goform/setRIP. The manipulation of the argument RIPmode/RIPpasswd leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-8822
A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function algDisable of the file /goform/setOpMode. The manipulation of the argument opMode leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-8820
A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This vulnerability affects the function wirelessBasic of the file /goform/wirelessBasic. The manipulation of the argument submit_SSID1 leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-8819
A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function setWan of the file /goform/setWan. The manipulation of the argument staticIp leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-8816
A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function setOpMode of the file /goform/setOpMode. The manipulation of the argument ethConv leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-4317
The TheGem theme for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the thegem_get_logo_url() function in all versions up to, and including, 5.10.3. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible.
-
CVE-2024-12992
Improper Neutralization of Special Elements used in a Command vulnerability allows OS Command Injection via RCE. This issue affects Pandora FMS from 700 to 777.6 .
-
CVE-2025-44654
In Linksys E2500 3.0.04.002, the chroot_local_user option is enabled in the vsftpd configuration file. This could lead to unauthorized access to system files, privilege escalation, or use of the compromised server as a pivot point for internal network attacks.
-
CVE-2025-49681
Out-of-bounds read in Windows Routing and Remote Access Service (RRAS) allows an unauthorized attacker to disclose information over a network.
-
CVE-2025-49671
Exposure of sensitive information to an unauthorized actor in Windows Routing and Remote Access Service (RRAS) allows an unauthorized attacker to disclose information over a network.
-
CVE-2025-59377
feiskyer mcp-kubernetes-server through 0.1.11 allows OS command injection, even in read-only mode, via /mcp/kubectl because shell=True is used. NOTE: this is unrelated to mcp-server-kubernetes and CVE-2025-53355.
-
CVE-2025-58062
LSTM-Kirigaya's openmcp-client is a vscode plugin for mcp developer. Prior to version 0.1.12, when users on a Windows platform connect to an attacker controlled MCP server, attackers could provision a malicious authorization server endpoint to silently achieve an OS command injection attack in the open() invocation, leading to client system compromise. This issue has been patched in version 0.1.12.
-
CVE-2025-27203
Adobe Connect versions 24.0 and earlier are affected by a Deserialization of Untrusted Data vulnerability that could lead to arbitrary code execution by an attacker. Exploitation of this issue does require user interaction and scope is changed.
-
CVE-2025-6445
ServiceStack FindType Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ServiceStack. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the implementation of the FindType method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25837.
-
CVE-2025-4660
A remote code execution vulnerability exists in the Windows agent component of SecureConnector due to improper access controls on a named pipe. The pipe is accessible to the Everyone group and does not restrict remote connections, allowing any network-based attacker to connect without authentication. By interacting with this pipe, an attacker can redirect the agent to communicate with a rogue server that can issue commands via the SecureConnector Agent. This does not impact Linux or OSX Secure Connector.
-
CVE-2025-26671
Use after free in Windows Remote Desktop Services allows an unauthorized attacker to execute code over a network.
-
CVE-2025-48471
FreeScout is a free self-hosted help desk and shared mailbox. Prior to version 1.8.179, the application does not check or performs insufficient checking of files uploaded to the application. This allows files to be uploaded with the phtml and phar extensions, which can lead to remote code execution if the Apache web server is used. This issue has been patched in version 1.8.179.
-
CVE-2025-28017
TOTOLINK A800R V4.1.2cu.5032_B20200408 is vulnerable to Command Injection in downloadFile.cgi via the QUERY_STRING parameter.
-
CVE-2025-21253
Microsoft Edge for IOS and Android Spoofing Vulnerability
-
CVE-2025-66645
NiceGUI is a Python-based UI framework. Versions 3.3.1 and below are vulnerable to directory traversal through the App.add_media_files() function, which allows a remote attacker to read arbitrary files on the server filesystem. This issue is fixed in version 3.4.0.
-
CVE-2025-61591
Cursor is a code editor built for programming with AI. In versions 1.7 and below, when MCP uses OAuth authentication with an untrusted MCP server, an attacker can impersonate a malicious MCP server and return crafted, maliciously injected commands during the interaction process, leading to command injection and potential remote code execution. If chained with an untrusted MCP service via OAuth, this command injection vulnerability could allow arbitrary code execution on the host by the agent. This can then be used to directly compromise the system by executing malicious commands with full user privileges. This issue does not currently have a fixed release version, but there is a patch, 2025.09.17-25b418f.
-
CVE-2025-31137
React Router is a multi-strategy router for React bridging the gap from React 18 to React 19. There is a vulnerability in Remix/React Router that affects all Remix 2 and React Router 7 consumers using the Express adapter. Basically, this vulnerability allows anyone to spoof the URL used in an incoming Request by putting a URL pathname in the port section of a URL that is part of a Host or X-Forwarded-Host header sent to a Remix/React Router request handler. This issue has been patched and released in Remix 2.16.3 and React Router 7.4.1.
-
CVE-2025-5462
A heap-based buffer overflow in Ivanti Connect Secure before 22.7R2.8 or 22.8R2, Ivanti Policy Secure before 22.7R1.5, Ivanti ZTA Gateway before 22.8R2.3-723 and Ivanti Neurons for Secure Access before 22.8R1.4 (Fix deployed on 02-Aug-2025) allows a remote unauthenticated attacker to trigger a denial of service.
-
CVE-2024-53286
Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in DDNS Record functionality in Synology Router Manager (SRM) before 1.3.1-9346-11 allows remote authenticated users with administrator privileges to execute arbitrary code via unspecified vectors.
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.