CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2025-37863
In the Linux kernel, the following vulnerability has been resolved: ovl: don't allow datadir only In theory overlayfs could support upper layer directly referring to a data layer, but there's no current use case for this. Originally, when data-only layers were introduced, this wasn't allowed, only introduced by the "datadir+" feature, but without actually handling this case, resulting in an Oops. Fix by disallowing datadir without lowerdir.
-
CVE-2025-37837
In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/[email protected]/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that.
-
CVE-2023-52986
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener A listening socket linked to a sockmap has its sk_prot overridden. It points to one of the struct proto variants in tcp_bpf_prots. The variant depends on the socket's family and which sockmap programs are attached. A child socket cloned from a TCP listener initially inherits their sk_prot. But before cloning is finished, we restore the child's proto to the listener's original non-tcp_bpf_prots one. This happens in tcp_create_openreq_child -> tcp_bpf_clone. Today, in tcp_bpf_clone we detect if the child's proto should be restored by checking only for the TCP_BPF_BASE proto variant. This is not correct. The sk_prot of listening socket linked to a sockmap can point to to any variant in tcp_bpf_prots. If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then the child socket unintentionally is left if the inherited sk_prot by tcp_bpf_clone. This leads to issues like infinite recursion on close [1], because the child state is otherwise not set up for use with tcp_bpf_prot operations. Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants. Note that it wouldn't be sufficient to check the socket state when overriding the sk_prot in tcp_bpf_update_proto in order to always use the TCP_BPF_BASE variant for listening sockets. Since commit b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage") it is possible for a socket to transition to TCP_LISTEN state while already linked to a sockmap, e.g. connect() -> insert into map -> connect(AF_UNSPEC) -> listen(). [1]: https://lore.kernel.org/all/[email protected]/
-
CVE-2023-52976
In the Linux kernel, the following vulnerability has been resolved: efi: fix potential NULL deref in efi_mem_reserve_persistent When iterating on a linked list, a result of memremap is dereferenced without checking it for NULL. This patch adds a check that falls back on allocating a new page in case memremap doesn't succeed. Found by Linux Verification Center (linuxtesting.org) with SVACE. [ardb: return -ENOMEM instead of breaking out of the loop]
-
CVE-2022-49716
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. When kcalloc fails, it missing of_node_put() and results in refcount leak. Fix this by goto out_put_node label.
-
CVE-2022-49710
In the Linux kernel, the following vulnerability has been resolved: dm mirror log: round up region bitmap size to BITS_PER_LONG The code in dm-log rounds up bitset_size to 32 bits. It then uses find_next_zero_bit_le on the allocated region. find_next_zero_bit_le accesses the bitmap using unsigned long pointers. So, on 64-bit architectures, it may access 4 bytes beyond the allocated size. Fix this bug by rounding up bitset_size to BITS_PER_LONG. This bug was found by running the lvm2 testsuite with kasan.
-
CVE-2022-49671
In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix memory leak in ib_cm_insert_listen cm_alloc_id_priv() allocates resource for the cm_id_priv. When cm_init_listen() fails it doesn't free it, leading to memory leak. Add the missing error unwind.
-
CVE-2022-49675
In the Linux kernel, the following vulnerability has been resolved: tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c.
-
CVE-2022-49653
In the Linux kernel, the following vulnerability has been resolved: i2c: piix4: Fix a memory leak in the EFCH MMIO support The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths.
-
CVE-2022-49658
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has not been done at that point via __update_reg_bounds(), which would have improved the umax to be equal to umin. Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync() helper and use it consistently everywhere. After the fix, bounds have been corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register is regarded as a 'proper' constant scalar of 0. After: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0 ---truncated---
-
CVE-2022-49553
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate BOOT sectors_per_clusters When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a shift value. Make sure that the shift value is not too large before using it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large. This prevents negative shift values and shift values that are larger than the field size. Prevents this UBSAN error: UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16 shift exponent -192 is negative
-
CVE-2022-49545
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Cancel pending work at closing a MIDI substream At closing a USB MIDI output substream, there might be still a pending work, which would eventually access the rawmidi runtime object that is being released. For fixing the race, make sure to cancel the pending work at closing.
-
CVE-2022-49503
In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'
-
CVE-2022-49474
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout Connecting the same socket twice consecutively in sco_sock_connect() could lead to a race condition where two sco_conn objects are created but only one is associated with the socket. If the socket is closed before the SCO connection is established, the timer associated with the dangling sco_conn object won't be canceled. As the sock object is being freed, the use-after-free problem happens when the timer callback function sco_sock_timeout() accesses the socket. Here's the call trace: dump_stack+0x107/0x163 ? refcount_inc+0x1c/ print_address_description.constprop.0+0x1c/0x47e ? refcount_inc+0x1c/0x7b kasan_report+0x13a/0x173 ? refcount_inc+0x1c/0x7b check_memory_region+0x132/0x139 refcount_inc+0x1c/0x7b sco_sock_timeout+0xb2/0x1ba process_one_work+0x739/0xbd1 ? cancel_delayed_work+0x13f/0x13f ? __raw_spin_lock_init+0xf0/0xf0 ? to_kthread+0x59/0x85 worker_thread+0x593/0x70e kthread+0x346/0x35a ? drain_workqueue+0x31a/0x31a ? kthread_bind+0x4b/0x4b ret_from_fork+0x1f/0x30
-
CVE-2022-49400
In the Linux kernel, the following vulnerability has been resolved: md: Don't set mddev private to NULL in raid0 pers->free In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem.
-
CVE-2022-49402
In the Linux kernel, the following vulnerability has been resolved: ftrace: Clean up hash direct_functions on register failures We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] <TASK> [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] </TASK> [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore.
-
CVE-2022-49352
In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value.
-
CVE-2022-49340
In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured.
-
CVE-2022-49274
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix crash when mount with quota enabled There is a reported crash when mounting ocfs2 with quota enabled. RIP: 0010:ocfs2_qinfo_lock_res_init+0x44/0x50 [ocfs2] Call Trace: ocfs2_local_read_info+0xb9/0x6f0 [ocfs2] dquot_load_quota_sb+0x216/0x470 dquot_load_quota_inode+0x85/0x100 ocfs2_enable_quotas+0xa0/0x1c0 [ocfs2] ocfs2_fill_super.cold+0xc8/0x1bf [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x465/0xac0 __x64_sys_mount+0x103/0x140 It is caused by when initializing dqi_gqlock, the corresponding dqi_type and dqi_sb are not properly initialized. This issue is introduced by commit 6c85c2c72819, which wants to avoid accessing uninitialized variables in error cases. So make global quota info properly initialized.
-
CVE-2022-49275
In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.
-
CVE-2022-49266
In the Linux kernel, the following vulnerability has been resolved: block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0%
-
CVE-2022-49145
In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Avoid out of bounds access when parsing _CPC data If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/
-
CVE-2025-24139
The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3, macOS Ventura 13.7.5. Parsing a maliciously crafted file may lead to an unexpected app termination.
-
CVE-2025-59278
Improper validation of specified type of input in Windows Authentication Methods allows an authorized attacker to elevate privileges locally.
-
CVE-2025-59275
Improper validation of specified type of input in Windows Authentication Methods allows an authorized attacker to elevate privileges locally.
-
CVE-2025-38377
In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations.
-
CVE-2025-53027
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.1.10. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H).
-
CVE-2025-53028
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.1.10. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H).
-
CVE-2022-50080
In the Linux kernel, the following vulnerability has been resolved: tee: add overflow check in register_shm_helper() With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early.
-
CVE-2022-49957
In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away.
-
CVE-2024-47893
Kernel software installed and running inside a Guest VM may exploit memory shared with the GPU Firmware to read and/or write data outside the Guest's virtualised GPU memory.
-
CVE-2025-38152
In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc. After Kernel boots up, stop the rproc, load a new firmware which doesn't have resource table ,and start rproc. When starting rproc with a firmware not have resource table, `memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will trigger dump, because rproc->cache_table is set to NULL during the last stop operation, but rproc->table_sz is still valid. This issue is found on i.MX8MP and i.MX9. Dump as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_memcpy_generic+0x110/0x22c lr : rproc_start+0x88/0x1e0 Call trace: __pi_memcpy_generic+0x110/0x22c (P) rproc_boot+0x198/0x57c state_store+0x40/0x104 dev_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x120/0x1cc vfs_write+0x240/0x378 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xcc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c Clear rproc->table_sz to address the issue.
-
CVE-2025-24283
A logging issue was addressed with improved data redaction. This issue is fixed in iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, visionOS 2.4, watchOS 11.4. An app may be able to access sensitive user data.
-
CVE-2025-21776
In the Linux kernel, the following vulnerability has been resolved: USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface.
-
CVE-2022-49731
In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.
-
CVE-2022-49707
In the Linux kernel, the following vulnerability has been resolved: ext4: add reserved GDT blocks check We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck mount /dev/sda /mnt resize2fs /dev/sda 8G ======== BUG: kernel NULL pointer dereference, address: 0000000000000028 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748 ... RIP: 0010:ext4_flex_group_add+0xe08/0x2570 ... Call Trace: <TASK> ext4_resize_fs+0xbec/0x1660 __ext4_ioctl+0x1749/0x24e0 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xa6/0x110 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2dd739617b ======== The fix is simple, add a check in ext4_resize_begin() to make sure that the es->s_reserved_gdt_blocks is zero when the resize_inode feature is disabled.
-
CVE-2022-49657
In the Linux kernel, the following vulnerability has been resolved: usbnet: fix memory leak in error case usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer
-
CVE-2022-49644
In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector() If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)
-
CVE-2022-49623
In the Linux kernel, the following vulnerability has been resolved: powerpc/xive/spapr: correct bitmap allocation size kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency.
-
CVE-2022-49557
In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint
-
CVE-2022-49562
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D bits instead of mapping the PTE into kernel address space. The VM_PFNMAP path is broken as it assumes that vm_pgoff is the base pfn of the mapped VMA range, which is conceptually wrong as vm_pgoff is the offset relative to the file and has nothing to do with the pfn. The horrific hack worked for the original use case (backing guest memory with /dev/mem), but leads to accessing "random" pfns for pretty much any other VM_PFNMAP case.
-
CVE-2022-49412
In the Linux kernel, the following vulnerability has been resolved: bfq: Avoid merging queues with different parents It can happen that the parent of a bfqq changes between the moment we decide two queues are worth to merge (and set bic->stable_merge_bfqq) and the moment bfq_setup_merge() is called. This can happen e.g. because the process submitted IO for a different cgroup and thus bfqq got reparented. It can even happen that the bfqq we are merging with has parent cgroup that is already offline and going to be destroyed in which case the merge can lead to use-after-free issues such as: BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50 Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544 CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x46/0x5a print_address_description.constprop.0+0x1f/0x140 ? __bfq_deactivate_entity+0x9cb/0xa50 kasan_report.cold+0x7f/0x11b ? __bfq_deactivate_entity+0x9cb/0xa50 __bfq_deactivate_entity+0x9cb/0xa50 ? update_curr+0x32f/0x5d0 bfq_deactivate_entity+0xa0/0x1d0 bfq_del_bfqq_busy+0x28a/0x420 ? resched_curr+0x116/0x1d0 ? bfq_requeue_bfqq+0x70/0x70 ? check_preempt_wakeup+0x52b/0xbc0 __bfq_bfqq_expire+0x1a2/0x270 bfq_bfqq_expire+0xd16/0x2160 ? try_to_wake_up+0x4ee/0x1260 ? bfq_end_wr_async_queues+0xe0/0xe0 ? _raw_write_unlock_bh+0x60/0x60 ? _raw_spin_lock_irq+0x81/0xe0 bfq_idle_slice_timer+0x109/0x280 ? bfq_dispatch_request+0x4870/0x4870 __hrtimer_run_queues+0x37d/0x700 ? enqueue_hrtimer+0x1b0/0x1b0 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_update_offsets_now+0x6f/0x280 hrtimer_interrupt+0x2c8/0x740 Fix the problem by checking that the parent of the two bfqqs we are merging in bfq_setup_merge() is the same.
-
CVE-2022-49178
In the Linux kernel, the following vulnerability has been resolved: memstick/mspro_block: fix handling of read-only devices Use set_disk_ro to propagate the read-only state to the block layer instead of checking for it in ->open and leaking a reference in case of a read-only device.
-
CVE-2022-49115
In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix misused goto label Fix a misused goto label jump since that can result in a memory leak.
-
CVE-2025-53000
The nbconvert tool, jupyter nbconvert, converts Jupyter notebooks to various other formats via Jinja templates. Versions of nbconvert up to and including 7.16.6 on Windows have a vulnerability in which converting a notebook containing SVG output to a PDF results in unauthorized code execution. Specifically, a third party can create a `inkscape.bat` file that defines a Windows batch script, capable of arbitrary code execution. When a user runs `jupyter nbconvert --to pdf` on a notebook containing SVG output to a PDF on a Windows platform from this directory, the `inkscape.bat` file is run unexpectedly. This issue has been patched in version 7.17.0.
-
CVE-2025-58477
Out-of-bounds write in parsing IFD tag in libimagecodec.quram.so prior to SMR Dec-2025 Release 1 allows remote attackers to access out-of-bounds memory.
-
CVE-2025-58478
Out-of-bounds write in libimagecodec.quram.so prior to SMR Dec-2025 Release 1 allows remote attackers to access out-of-bounds memory.
-
CVE-2025-58714
Improper access control in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally.
-
CVE-2025-39897
In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Add error handling for RX metadata pointer retrieval Add proper error checking for dmaengine_desc_get_metadata_ptr() which can return an error pointer and lead to potential crashes or undefined behaviour if the pointer retrieval fails. Properly handle the error by unmapping DMA buffer, freeing the skb and returning early to prevent further processing with invalid data.
-
CVE-2022-50101
In the Linux kernel, the following vulnerability has been resolved: video: fbdev: vt8623fb: Check the size of screen before memset_io() In the function vt8623fb_set_par(), the value of 'screen_size' is calculated by the user input. If the user provides the improper value, the value of 'screen_size' may larger than 'info->screen_size', which may cause the following bug: [ 583.339036] BUG: unable to handle page fault for address: ffffc90005000000 [ 583.339049] #PF: supervisor write access in kernel mode [ 583.339052] #PF: error_code(0x0002) - not-present page [ 583.339074] RIP: 0010:memset_orig+0x33/0xb0 [ 583.339110] Call Trace: [ 583.339118] vt8623fb_set_par+0x11cd/0x21e0 [ 583.339146] fb_set_var+0x604/0xeb0 [ 583.339181] do_fb_ioctl+0x234/0x670 [ 583.339209] fb_ioctl+0xdd/0x130 Fix the this by checking the value of 'screen_size' before memset_io().
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.