CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2025-20185
A vulnerability in the implementation of the remote access functionality of Cisco AsyncOS Software for Cisco Secure Email and Web Manager, Cisco Secure Email Gateway, and Cisco Secure Web Appliance could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. This vulnerability is due to an architectural flaw in the password generation algorithm for the remote access functionality. An attacker could exploit this vulnerability by generating a temporary password for the service account. A successful exploit could allow the attacker to execute arbitrary commands as root and access the underlying operating system. Note: The Security Impact Rating (SIR) for this vulnerability is Medium due to the unrestricted scope of information that is accessible to an attacker.
-
CVE-2025-54821
An Improper Privilege Management vulnerability [CWE-269] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.11, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiPAM 1.6.0, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4.0 through 7.4.13, FortiProxy 7.2 all versions, FortiProxy 7.0 all versions may allow an authenticated administrator to bypass the trusted host policy via crafted CLI command.
-
CVE-2025-64715
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Prior to versions 1.16.17, 1.17.10, and 1.18.4, CiliumNetworkPolicys which use egress.toGroups.aws.securityGroupsIds to reference AWS security group IDs that do not exist or are not attached to any network interface may unintentionally allow broader outbound access than intended by the policy authors. In such cases, the toCIDRset section of the derived policy is not generated, which means outbound traffic may be permitted to more destinations than originally intended. This issue has been patched in versions 1.16.17, 1.17.10, and 1.18.4. There are no workarounds for this issue.
-
CVE-2025-59957
An Origin Validation Error vulnerability in an insufficient protected file of Juniper Networks Junos OS on EX4600 Series and QFX5000 Series allows an unauthenticated attacker with physical access to the device to create a backdoor which allows complete control of the system. When a device isn't configured with a root password, an attacker can modify a specific file. It's contents will be added to the Junos configuration of the device without being visible. This allows for the addition of any configuration unknown to the actual operator, which includes users, IP addresses and other configuration which could allow unauthorized access to the device. This exploit is persistent across reboots and even zeroization. The indicator of compromise is a modified /etc/config/<platform>-defaults[-flex].conf file. Review that file for unexpected configuration statements, or compare it to an unmodified version which can be extracted from the original Juniper software image file. For details on the extraction procedure please contact Juniper Technical Assistance Center (JTAC). To restore the device to a trusted initial configuration the system needs to be reinstalled from physical media. This issue affects Junos OS on EX4600 Series and QFX5000 Series: * All versions before 21.4R3, * 22.2 versions before 22.2R3-S3.
-
CVE-2025-20313
Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. ERP
-
CVE-2025-20295
A vulnerability in the CLI of Cisco UCS Manager Software could allow an authenticated, local attacker with administrative privileges to read or create a file or overwrite any file on the file system of the underlying operating system of an affected device, including system files. This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to read or create a file or overwrite any file on the file system of the underlying operating system of the affected device, including system files. To exploit this vulnerability, the attacker must have valid administrative credentials on the affected device.
-
CVE-2025-58412
A improper neutralization of script-related html tags in a web page (basic xss) vulnerability in Fortinet FortiADC 8.0.0, FortiADC 7.6.0 through 7.6.3, FortiADC 7.4 all versions, FortiADC 7.2 all versions may allow attacker to execute unauthorized code or commands via crafted URL.
-
CVE-2024-33501
Two improper neutralization of special elements used in an SQL Command ('SQL Injection') vulnerability [CWE-89] in Fortinet FortiAnalyzer version 7.4.0 through 7.4.2 and before 7.2.5, FortiManager version 7.4.0 through 7.4.2 and before 7.2.5 and FortiAnalyzer-BigData version 7.4.0 and before 7.2.7 allows a privileged attacker to execute unauthorized code or commands via specifically crafted CLI requests.
-
CVE-2024-46663
A stack-buffer overflow vulnerability [CWE-121] in Fortinet FortiMail CLI version 7.6.0 through 7.6.1 and before 7.4.3 allows a privileged attacker to execute arbitrary code or commands via specifically crafted CLI commands.
-
CVE-2025-60010
A password aging vulnerability in the RADIUS client of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated, network-based attacker to access the device without enforcing the required password change. Affected devices allow logins by users for whom the RADIUS server has responded with a reject and required the user to change the password as their password was expired. Therefore the policy mandating the password change is not enforced. This does not allow users to login with a wrong password, but only with the correct but expired one. This issue affects: Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2-S1, * 24.4 versions before 24.4R1-S3, 24.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S4-EVO, * 23.4 versions before 23.4R2-S5-EVO, * 24.2 versions before 24.2R2-S1-EVO, * 24.4 versions before 24.4R1-S3-EVO, 24.4R2-EVO.
-
CVE-2025-20326
A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) Software and Cisco Unified CM Session Management Edition (SME) Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected device. This vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user.
-
CVE-2025-8870
On affected platforms running Arista EOS, certain serial console input might result in an unexpected reload of the device.153
-
CVE-2025-59962
An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS). With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition. This issue affects: Junos OS: * all versions before 21.4R3-S6, * from 22.1 before 22.1R3-S6, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2; Junos OS Evolved: * all versions before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-EVO, * from 23.2 before 23.2R2-EVO. Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue.
-
CVE-2025-20237
A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying operating system as root.
-
CVE-2025-62773
Mercku M6a devices through 2.1.0 allow TELNET sessions via a router.telnet.enabled.update request by an administrator.
-
CVE-2023-48785
An improper certificate validation vulnerability [CWE-295] in FortiNAC-F version 7.2.4 and below may allow a remote and unauthenticated attacker to perform a Man-in-the-Middle attack on the HTTPS communication channel between the FortiOS device, an inventory, and FortiNAC-F.
-
CVE-2019-25238
V-SOL GPON/EPON OLT Platform 2.03 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without user consent. Attackers can craft malicious web pages to create admin users, enable SSH, or modify system settings by tricking authenticated administrators into loading a specially crafted page.
-
CVE-2025-9696
The SunPower PVS6's BluetoothLE interface is vulnerable due to its use of hardcoded encryption parameters and publicly accessible protocol details. An attacker within Bluetooth range could exploit this vulnerability to gain full access to the device's servicing interface. This access allows the attacker to perform actions such as firmware replacement, disabling power production, modifying grid settings, creating SSH tunnels, altering firewall settings, and manipulating connected devices.
-
CVE-2024-54019
A improper validation of certificate with host mismatch in Fortinet FortiClientWindows version 7.4.0, versions 7.2.0 through 7.2.6, and 7.0 all versions allow an unauthorized attacker to redirect VPN connections via DNS spoofing or another form of redirection.
-
CVE-2025-0136
Using the AES-128-CCM algorithm for IPSec on certain Palo Alto Networks PAN-OS® firewalls (PA-7500, PA-5400, PA-5400f, PA-3400, PA-1600, PA-1400, and PA-400 Series) leads to unencrypted data transfer to devices that are connected to the PAN-OS firewall through IPSec. This issue does not affect Cloud NGFWs, Prisma® Access instances, or PAN-OS VM-Series firewalls. NOTE: The AES-128-CCM encryption algorithm is not recommended for use.
-
CVE-2025-12381
Improper Privilege Management vulnerability in AlgoSec Firewall Analyzer on Linux, 64 bit allows Privilege Escalation, Parameter Injection. A local user with access to the command line may escalate their privileges by abusing the parameters of a command that is approved in the sudoers file. This issue affects Firewall Analyzer: A33.0, A33.10.
-
CVE-2025-24323
Improper access control in some firmware package and LED mode toggle tool for some Intel(R) PCIe Switch software before version MR4_1.0b1 may allow a privileged user to potentially enable escalation of privilege via local access.
-
CVE-2025-52954
A Missing Authorization vulnerability in the internal virtual routing and forwarding (VRF) of Juniper Networks Junos OS Evolved allows a local, low-privileged user to gain root privileges, leading to a system compromise. Any low-privileged user with the capability to send packets over the internal VRF can execute arbitrary Junos commands and modify the configuration, and thus compromise the system. This issue affects Junos OS Evolved: * All versions before 22.2R3-S7-EVO, * from 22.4 before 22.4R3-S7-EVO, * from 23.2 before 23.2R2-S4-EVO, * from 23.4 before 23.4R2-S5-EVO, * from 24.2 before 24.2R2-S1-EVO * from 24.4 before 24.4R1-S2-EVO, 24.4R2-EVO.
-
CVE-2025-4227
An improper access control vulnerability in the Endpoint Traffic Policy Enforcement https://docs.paloaltonetworks.com/globalprotect/6-0/globalprotect-app-new-features/new-features-released-in-gp-app/endpoint-traffic-policy-enforcement feature of the Palo Alto Networks GlobalProtect™ app allows certain packets to remain unencrypted instead of being properly secured within the tunnel. An attacker with physical access to the network can inject rogue devices to intercept these packets. Under normal operating conditions, the GlobalProtect app automatically recovers from this interception within one minute.
-
CVE-2025-46775
A debug messages revealing unnecessary information vulnerability in Fortinet FortiExtender 7.6.0 through 7.6.1, FortiExtender 7.4.0 through 7.4.6, FortiExtender 7.2 all versions, FortiExtender 7.0 all versions may allow an authenticated user to obtain administrator credentials via debug log commands.
-
CVE-2022-50063
In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: suppress non-changes to the tagging protocol The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0
-
CVE-2022-49808
In the Linux kernel, the following vulnerability has been resolved: net: dsa: don't leak tagger-owned storage on switch driver unbind In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data"), we had a call to tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at tree teardown time. There were problems with connecting to a switch tree as a whole, so this got reworked to connecting to individual switches within the tree. In this process, tag_ops->disconnect(ds) was made to be called only from switch.c (cross-chip notifiers emitted as a result of dynamic tag proto changes), but the normal driver teardown code path wasn't replaced with anything. Solve this problem by adding a function that does the opposite of dsa_switch_setup_tag_protocol(), which is called from the equivalent spot in dsa_switch_teardown(). The positioning here also ensures that we won't have any use-after-free in tagging protocol (*rcv) ops, since the teardown sequence is as follows: dsa_tree_teardown -> dsa_tree_teardown_master -> dsa_master_teardown -> unsets master->dsa_ptr, making no further packets match the ETH_P_XDSA packet type handler -> dsa_tree_teardown_ports -> dsa_port_teardown -> dsa_slave_destroy -> unregisters DSA net devices, there is even a synchronize_net() in unregister_netdevice_many() -> dsa_tree_teardown_switches -> dsa_switch_teardown -> dsa_switch_teardown_tag_protocol -> finally frees the tagger-owned storage
-
CVE-2025-20213
A vulnerability in the CLI of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an authenticated, local attacker to overwrite arbitrary files on the local file system of an affected device. To exploit this vulnerability, the attacker must have valid read-only credentials with CLI access on the affected system. This vulnerability is due to improper access controls on files that are on the local file system. An attacker could exploit this vulnerability by running a series of crafted commands on the local file system of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device and gain privileges of the root user. To exploit this vulnerability, an attacker would need to have CLI access as a low-privilege user.
-
CVE-2025-2027
A double free vulnerability has been identified in the ASUS System Analysis service. This vulnerability can be triggered by sending specially crafted local RPC requests, leading to the service crash and potentially memory manipulation in some rare circumstances. Refer to the 'Security Update for MyASUS' section on the ASUS Security Advisory for more information.
-
CVE-2025-25056
Cross-site request forgery vulnerability exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If a user views a malicious page while logged in, unintended operations may be performed.
-
CVE-2025-46776
A buffer copy without checking size of input ('classic buffer overflow') vulnerability in Fortinet FortiExtender 7.6.0 through 7.6.1, FortiExtender 7.4.0 through 7.4.6, FortiExtender 7.2 all versions, FortiExtender 7.0 all versions may allow an authenticated user to execute arbitrary code or commands via crafted CLI commands.
-
CVE-2025-12943
Improper certificate validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band WiFi 6E Router) allows attackers with the ability to intercept and tamper traffic destined to the device to execute arbitrary commands on the device. Devices with automatic updates enabled may already have this patch applied. If not, please check the firmware version and update to the latest. Fixed in: RAX30 firmware 1.0.14.108 or later. RAXE300 firmware 1.0.9.82 or later
-
CVE-2025-20365
A vulnerability in the IPv6 Router Advertisement (RA) packet processing of Cisco Access Point Software could allow an unauthenticated, adjacent attacker to modify the IPv6 gateway on an affected device. This vulnerability is due to a logic error in the processing of IPv6 RA packets that are received from wireless clients. An attacker could exploit this vulnerability by associating to a wireless network and sending a series of crafted IPv6 RA packets. A successful exploit could allow the attacker to temporarily change the IPv6 gateway of an affected device. This could also lead to intermittent packet loss for any wireless clients that are associated with the affected device.
-
CVE-2015-20112
RLPx 5 has two CTR streams based on the same key, IV, and nonce. This can facilitate decryption on a private network.
-
CVE-2025-21592
An Exposure of Sensitive Information to an Unauthorized Actor vulnerability in the command-line interface (CLI) of Juniper Networks Junos OS on SRX Series devices allows a local, low-privileged user with access to the Junos CLI to view the contents of sensitive files on the file system. Through the execution of either 'show services advanced-anti-malware' or 'show services security-intelligence' command, a user with limited permissions (e.g., a low privilege login class user) can access protected files that should not be accessible to the user. These files may contain sensitive information that can be used to cause further impact to the system. This issue affects Junos OS SRX Series: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S5, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S2, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R2.
-
CVE-2025-54660
An active debug code vulnerability in Fortinet FortiClientWindows 7.4.0 through 7.4.3, FortiClientWindows 7.2.0 through 7.2.10, FortiClientWindows 7.0 all versions may allow a local attacker to run the application step by step and retrieve the saved VPN user password
-
CVE-2025-20238
A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying operating system as root.
-
CVE-2019-25250
Devolo dLAN 500 AV Wireless+ 3.1.0-1 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without proper request validation. Attackers can craft malicious web pages that trigger unauthorized configuration changes by exploiting predictable URL actions when a logged-in user visits the site.
-
CVE-2024-40590
An improper certificate validation vulnerability [CWE-295] in FortiPortal version 7.4.0, version 7.2.4 and below, version 7.0.8 and below, version 6.0.15 and below when connecting to a FortiManager device, a FortiAnalyzer device, or an SMTP server may allow an unauthenticated attacker in a Man-in-the-Middle position to intercept on and tamper with the encrypted communication channel established between the FortiPortal and those endpoints.
-
CVE-2025-46752
A insertion of sensitive information into log file in Fortinet FortiDLP 12.0.0 through 12.0.5, 11.5.1, 11.4.6, 11.4.5 allows attacker to information disclosure via re-using the enrollment code.
-
CVE-2021-22126
A use of hard-coded password vulnerability in FortiWLC version 8.5.2 and below, version 8.4.8 and below, version 8.3.3 to 8.3.2, version 8.2.7 to 8.2.6 may allow a local, authenticated attacker to connect to the managed Access Point (Meru AP and FortiAP-U) as root using the default hard-coded username and password.
-
CVE-2025-25523
Buffer overflow vulnerability in Trendnet TEG-40128 Web Smart Switch v1(1.00.023) due to the lack of length verification, which is related to the mobile access point setup operation. The attacker can directly control the remote target device by successfully exploiting this vulnerability.
-
CVE-2024-12957
A file handling command vulnerability in certain versions of Armoury Crate may result in arbitrary file deletion. Refer to the '01/23/2025 Security Update for Armoury Crate App' section on the ASUS Security Advisory for more information.
-
CVE-2024-9133
A user with administrator privileges is able to retrieve authentication tokens
-
CVE-2025-20015
Uncontrolled search path element for some Intel(R) Ethernet Connection software before version 29.4 may allow an authenticated user to potentially enable escalation of privilege via local access.
-
CVE-2025-30077
Open Networking Foundation SD-RAN ONOS onos-lib-go 0.10.28 allows an index out-of-range panic in asn1/aper GetBitString via a zero value of numBits.
-
CVE-2024-5462
If Brocade Fabric OS before Fabric OS 9.2.0 configuration settings are not set to encrypt SNMP passwords, then the SNMP privsecret / authsecret fields can be exposed in plaintext. The plaintext passwords can be exposed in a configupload capture or a supportsave capture if encryption of passwords is not enabled. An attacker can use these passwords to fetch values of the supported OIDs via SNMPv3 queries. There are also a limited number of MIB objects that can be modified.
-
CVE-2024-54027
A Use of Hard-coded Cryptographic Key vulnerability [CWE-321] in FortiSandbox version 4.4.6 and below, version 4.2.7 and below, version 4.0.5 and below, version 3.2.4 and below, version 3.1.5 and below, version 3.0.7 to 3.0.5 may allow a privileged attacker with super-admin profile and CLI access to read sensitive data via CLI.
-
CVE-2025-20314
A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to improper validation of software packages. An attacker could exploit this vulnerability by placing a crafted file into a specific location on an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this vulnerability allows an attacker to bypass a major security feature of a device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
-
CVE-2025-52963
An Improper Access Control vulnerability in the User Interface (UI) of Juniper Networks Junos OS allows a local, low-privileged attacker to bring down an interface, leading to a Denial-of-Service. Users with "view" permissions can run a specific request interface command which allows the user to shut down the interface. This issue affects Junos OS: * All versions before 21.2R3-S9, * from 21.4 before 21.4R3-S11, * from 22.2 before 22.2R3-S7, * from 22.4 before 22.4R3-S7, * from 23.2 before 23.2R2-S4, * from 23.4 before 23.4R2-S5, * from 24.2 before 24.2R2-S1, * from 24.4 before 24.4R1-S3, 24.4R2.
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.