CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2024-13813
Insufficient permissions in Ivanti Secure Access Client before version 22.8R1 allows a local authenticated attacker to delete arbitrary files.
-
CVE-2025-11955
Incorrect validation of OCSP certificates vulnerability in TheGreenBow VPN, versions 7.5 and 7.6. During the IKEv2 authentication step, the OCSP-enabled VPN client establishes the tunnel even if it does not receive an OCSP response or if the OCSP response signature is invalid.
-
CVE-2025-57428
Default credentials in Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 allows attackers to gain access to the debug shell exposed via Telnet on Port 23 and execute hardware-level flash and register manipulation commands.
-
CVE-2025-12941
Denial of Service Vulnerability in NETGEAR C6220 and C6230 (DOCSIS® 3.0 Two-in-one Cable Modem + WiFi Router) allows authenticated local WiFi users reboot the router.
-
CVE-2025-20293
A vulnerability in the Day One setup process of Cisco IOS XE Software for Catalyst 9800 Series Wireless Controllers for Cloud (9800-CL) could allow an unauthenticated, remote attacker to access the public-key infrastructure (PKI) server that is running on an affected device. This vulnerability is due to incomplete cleanup upon completion of the Day One setup process. An attacker could exploit this vulnerability by sending Simple Certificate Enrollment Protocol (SCEP) requests to an affected device. A successful exploit could allow the attacker to request a certificate from the virtual wireless controller and then use the acquired certificate to join an attacker-controlled device to the virtual wireless controller.
-
CVE-2025-30163
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Node based network policies (`fromNodes` and `toNodes`) will incorrectly permit traffic to/from non-node endpoints that share the labels specified in `fromNodes` and `toNodes` sections of network policies. Node based network policy is disabled by default in Cilium. This issue affects: Cilium v1.16 between v1.16.0 and v1.16.7 inclusive and v1.17 between v1.17.0 and v1.17.1 inclusive. This issue is fixed in Cilium v1.16.8 and v1.17.2. Users can work around this issue by ensuring that the labels used in `fromNodes` and `toNodes` fields are used exclusively by nodes and not by other endpoints.
-
CVE-2025-65011
In WODESYS WD-R608U router (also known as WDR122B V2.0 and WDR28) an unauthorised user can view configuration files by directly referencing the resource in question. The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version WDR28081123OV1.01 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable.
-
CVE-2025-11676
Improper input validation vulnerability in TP-Link System Inc. TL-WR940N V6 (UPnP modules), which allows unauthenticated adjacent attackers to perform DoS attack. This issue affects TL-WR940N V6 <= Build 220801.
-
CVE-2025-27259
Ericsson Network Manager versions prior to ENM 25.2 GA contain a vulnerability that, if exploited, can exfiltrate limited data or redirect victims to other sites or domains.
-
CVE-2025-59692
PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0.
-
CVE-2025-1732
An improper privilege management vulnerability in the recovery function of the Zyxel USG FLEX H series uOS firmware version V1.31 and earlier could allow an authenticated local attacker with administrator privileges to upload a crafted configuration file and escalate privileges on a vulnerable device.
-
CVE-2024-10405
Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network.
-
CVE-2024-45331
A incorrect privilege assignment vulnerability in Fortinet FortiAnalyzer 7.4.0 through 7.4.3, FortiAnalyzer 7.2.0 through 7.2.5, FortiAnalyzer 7.0 all versions, FortiAnalyzer 6.4 all versions, FortiAnalyzer Cloud 7.4.1 through 7.4.2, FortiAnalyzer Cloud 7.2.1 through 7.2.6, FortiAnalyzer Cloud 7.0 all versions, FortiAnalyzer Cloud 6.4 all versions, FortiManager 7.4.0 through 7.4.3, FortiManager 7.2.0 through 7.2.5, FortiManager 7.0 all versions, FortiManager 6.4 all versions allows attacker to escalate privilege via specific shell commands
-
CVE-2025-38086
In the Linux kernel, the following vulnerability has been resolved: net: ch9200: fix uninitialised access during mii_nway_restart In mii_nway_restart() the code attempts to call mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read() utilises a local buffer called "buff", which is initialised with control_read(). However "buff" is conditionally initialised inside control_read(): if (err == size) { memcpy(data, buf, size); } If the condition of "err == size" is not met, then "buff" remains uninitialised. Once this happens the uninitialised "buff" is accessed and returned during ch9200_mdio_read(): return (buff[0] | buff[1] << 8); The problem stems from the fact that ch9200_mdio_read() ignores the return value of control_read(), leading to uinit-access of "buff". To fix this we should check the return value of control_read() and return early on error.
-
CVE-2025-39850
In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objects When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0
-
CVE-2025-38020
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Disable MACsec offload for uplink representor profile MACsec offload is not supported in switchdev mode for uplink representors. When switching to the uplink representor profile, the MACsec offload feature must be cleared from the netdevice's features. If left enabled, attempts to add offloads result in a null pointer dereference, as the uplink representor does not support MACsec offload even though the feature bit remains set. Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features(). Kernel log: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x128/0x1dd0 Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff RSP: 0018:ffff888147a4f160 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078 RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000 FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? __mutex_lock+0x128/0x1dd0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mutex_lock_io_nested+0x1ae0/0x1ae0 ? lock_acquire+0x1c2/0x530 ? macsec_upd_offload+0x145/0x380 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 ? __kasan_kmalloc+0x77/0x90 ? __kmalloc_noprof+0x249/0x6b0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core] macsec_update_offload+0x26c/0x820 ? macsec_set_mac_address+0x4b0/0x4b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? _raw_spin_unlock_irqrestore+0x47/0x50 macsec_upd_offload+0x2c8/0x380 ? macsec_update_offload+0x820/0x820 ? __nla_parse+0x22/0x30 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240 genl_family_rcv_msg_doit+0x1cc/0x2a0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? cap_capable+0xd4/0x330 genl_rcv_msg+0x3ea/0x670 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? macsec_update_offload+0x820/0x820 netlink_rcv_skb+0x12b/0x390 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? netlink_ack+0xd80/0xd80 ? rwsem_down_read_slowpath+0xf90/0xf90 ? netlink_deliver_tap+0xcd/0xac0 ? netlink_deliver_tap+0x155/0xac0 ? _copy_from_iter+0x1bb/0x12c0 genl_rcv+0x24/0x40 netlink_unicast+0x440/0x700 ? netlink_attachskb+0x760/0x760 ? lock_acquire+0x1c2/0x530 ? __might_fault+0xbb/0x170 netlink_sendmsg+0x749/0xc10 ? netlink_unicast+0x700/0x700 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x700/0x700 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x53f/0x760 ? import_iovec+0x7/0x10 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x3c0/0x3c0 ? filter_irq_stacks+0x90/0x90 ? stack_depot_save_flags+0x28/0xa30 ___sys_sen ---truncated---
-
CVE-2025-2184
A credential management flaw in Palo Alto Networks Cortex XDR® Broker VM causes different Broker VM images to share identical default credentials for internal services. Users knowing these default credentials could access internal services on other Broker VM installations. The attacker must have network access to the Broker VM to exploit this issue.
-
CVE-2025-53754
This vulnerability exists in Digisol DG-GR6821AC Router due to hard-coded Root Access Credentials in system configuration of the device firmware. An attacker with physical access could exploit this vulnerability by extracting the firmware and analyzing the binary data to obtain the stored root access credentials. Successful exploitation of this vulnerability could allow the attacker to gain admin access to the targeted device.
-
CVE-2025-57569
Tenda F3 V12.01.01.48_multi and after is vulnerable to Buffer Overflow via the portList parameter in /goform/setNAT.
-
CVE-2025-57571
Tenda F3 V12.01.01.48_multi and after is vulnerable to Buffer Overflow. via the macFilterList parameter in goform/setNAT.
-
CVE-2025-2796
On affected platforms with hardware IPSec support running Arista EOS with IPsec enabled and anti-replay protection configured, EOS may exhibit unexpected behavior in specific cases. Received duplicate encrypted packets, which should be dropped under normal anti-replay protection, will instead be forwarded due to this vulnerability. Note: this issue does not affect VXLANSec or MACSec encryption functionality.
-
CVE-2025-29231
A stored cross-site scripting (XSS) vulnerability in the page_save component of Linksys E5600 V1.1.0.26 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the hostname and domainName parameters.
-
CVE-2025-9968
A link following vulnerability exists in the UnifyScanner component of Armoury Crate. This vulnerability may be triggered by creating a specially crafted junction, potentially leading to local privilege escalation. For more information, please refer to section 'Security Update for Armoury Crate App' in the ASUS Security Advisory.
-
CVE-2022-50047
In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6060: prevent crash on an unused port If the port isn't a CPU port nor a user port, 'cpu_dp' is a null pointer and a crash happened on dereferencing it in mv88e6060_setup_port(): [ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014 ... [ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84 [ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54 [ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0 [ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c [ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c [ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0 [ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184 [ 9.986632] __device_attach from bus_probe_device+0x8c/0x94 [ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8 [ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c [ 10.006292] process_one_work from worker_thread+0x30/0x4b8 [ 10.012155] worker_thread from kthread+0xd4/0x10c [ 10.017238] kthread from ret_from_fork+0x14/0x3c
-
CVE-2025-59967
A NULL Pointer Dereference vulnerability in the PFE management daemon (evo-pfemand) of Juniper Networks Junos OS Evolved on ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7348, ACX7509 devices allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). Whenever specific valid multicast traffic is received on any layer 3 interface the evo-pfemand process crashes and restarts. Continued receipt of specific valid multicast traffic results in a sustained Denial of Service (DoS) attack. This issue affects Junos OS Evolved on ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7348, ACX7509: * from 23.2R2-EVO before 23.2R2-S4-EVO, * from 23.4R1-EVO before 23.4R2-EVO. This issue affects IPv4 and IPv6. This issue does not affect Junos OS Evolved ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7348, ACX7509 versions before 23.2R2-EVO.
-
CVE-2024-8000
On affected platforms running Arista EOS with 802.1X configured, certain conditions may occur where a dynamic ACL is received from the AAA server resulting in only the first line of the ACL being installed after an Accelerated Software Upgrade (ASU) restart. Note: supplicants with pending captive-portal authentication during ASU would be impacted with this bug.
-
CVE-2025-25251
An Incorrect Authorization vulnerability [CWE-863] in FortiClient Mac 7.4.0 through 7.4.2, 7.2.0 through 7.2.8, 7.0.0 through 7.0.14 may allow a local attacker to escalate privileges via crafted XPC messages.
-
CVE-2025-13955
Predictable default Wi-Fi Password in Access Point functionality in EZCast Pro II before version 1.17478.177 allows attackers in Wi-Fi range to gain access to the dongle by calculating the default password from observable device identifiers
-
CVE-2024-40588
Multiple relative path traversal vulnerabilities [CWE-23] vulnerability in Fortinet FortiCamera 2.1 all versions, FortiCamera 2.0.0, FortiCamera 1.1 all versions, FortiCamera 1.0 all versions, FortiMail 7.6.0 through 7.6.1, FortiMail 7.4.0 through 7.4.3, FortiMail 7.2 all versions, FortiMail 7.0 all versions, FortiMail 6.4 all versions, FortiNDR 7.6.0 through 7.6.1, FortiNDR 7.4.0 through 7.4.6, FortiNDR 7.2 all versions, FortiNDR 7.1 all versions, FortiNDR 7.0 all versions, FortiRecorder 7.2.0 through 7.2.1, FortiRecorder 7.0.0 through 7.0.4, FortiRecorder 6.4 all versions, FortiVoice 7.0.0 through 7.0.3, FortiVoice 6.4.0 through 6.4.9, FortiVoice 6.0 all versions may allow a privileged attacker to read files from the underlying filesystem via crafted CLI requests.
-
CVE-2024-47566
A improper limitation of a pathname to a restricted directory ('path traversal') [CWE-23] in Fortinet FortiRecorder version 7.2.0 through 7.2.1 and before 7.0.4 allows a privileged attacker to delete files from the underlying filesystem via crafted CLI requests.
-
CVE-2025-65010
WODESYS WD-R608U router (also known as WDR122B V2.0 and WDR28) is vulnerable to Broken Access Control in initial configuration wizard.cgi endpoint. Malicious attacker can change admin panel password without authorization. The vulnerability can also be exploited after the initial configuration has been set. The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version WDR28081123OV1.01 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable.
-
CVE-2025-65009
In WODESYS WD-R608U router (also known as WDR122B V2.0 and WDR28) admin password is stored in configuration file as plaintext and can be obtained by unauthorized user by direct references to the resource in question. The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version WDR28081123OV1.01 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable.
-
CVE-2025-30661
An Incorrect Permission Assignment for Critical Resource vulnerability in line card script processing of Juniper Networks Junos OS allows a local, low-privileged user to install scripts to be executed as root, leading to privilege escalation. A local user with access to the local file system can copy a script to the router in a way that will be executed as root, as the system boots. Execution of the script as root can lead to privilege escalation, potentially providing the adversary complete control of the system. This issue only affects specific line cards, such as the MPC10, MPC11, LC4800, LC9600, MX304-LMIC16, SRX4700, and EX9200-15C. This issue affects Junos OS: * from 23.2 before 23.2R2-S4, * from 23.4 before 23.4R2-S5, * from 24.2 before 24.2R2-S1, * from 24.4 before 24.4R1-S3, 24.4R2. This issue does not affect versions prior to 23.1R2.
-
CVE-2025-4228
An incorrect privilege assignment vulnerability in Palo Alto Networks Cortex® XDR Broker VM allows an authenticated administrative user to execute certain files available within the Broker VM and escalate their privileges to root.
-
CVE-2025-27080
Vulnerabilities in the command line interface of AOS-CX could allow an authenticated remote attacker to expose sensitive information. Successful exploitation could allow an attacker to gain unauthorized access to services outside of the impacted switch, potentially leading to lateral movement involving those services.
-
CVE-2025-20220
A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials. For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory.
-
CVE-2025-48462
Successful exploitation of the vulnerability could allow an attacker to consume all available session slots and block other users from logging in, thereby preventing legitimate users from gaining access to the product.
-
CVE-2025-20275
A vulnerability in the file opening process of Cisco Unified Contact Center Express (Unified CCX) Editor could allow an unauthenticated attacker to execute arbitrary code on an affected device. This vulnerability is due to insecure deserialization of Java objects by the affected software. An attacker could exploit this vulnerability by persuading an authenticated, local user to open a crafted .aef file. A successful exploit could allow the attacker to execute arbitrary code on the host that is running the editor application with the privileges of the user who launched it.
-
CVE-2025-20308
A vulnerability in Cisco Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. This vulnerability is due to insufficient restrictions during the execution of specific CLI commands. An attacker could exploit this vulnerability by logging in to the Cisco Spaces Connector CLI as the spacesadmin user and executing a specific command with crafted parameters. A successful exploit could allow the attacker to elevate privileges from the spacesadmin user and execute arbitrary commands on the underlying operating system as root.
-
CVE-2025-37786
In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.
-
CVE-2024-57962
Vulnerability of incomplete verification information in the VPN service module Impact: Successful exploitation of this vulnerability may affect availability.
-
CVE-2025-52919
In Yealink RPS before 2025-05-26, the certificate upload function does not properly validate certificate content, potentially allowing invalid certificates to be uploaded.
-
CVE-2025-0115
A vulnerability in the Palo Alto Networks PAN-OS software enables an authenticated admin on the PAN-OS CLI to read arbitrary files. The attacker must have network access to the management interface (web, SSH, console, or telnet) and successfully authenticate to exploit this issue. You can greatly reduce the risk of this issue by restricting access to the management interface to only trusted users and internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue does not affect Cloud NGFW or Prisma Access.
-
CVE-2024-57790
IXON B.V. IXrouter IX2400 (Industrial Edge Gateway) v3.0 was discovered to contain hardcoded root credentials stored in the non-volatile flash memory. This vulnerability allows physically proximate attackers to gain root access via UART or SSH.
-
CVE-2023-46718
A stack-based buffer overflow in Fortinet FortiOS version 7.4.0 through 7.4.1 and 7.2.0 through 7.2.7 and 7.0.0 through 7.0.12 and 6.4.6 through 6.4.15 and 6.2.9 through 6.2.16 and 6.0.13 through 6.0.18 allows attacker to execute unauthorized code or commands via specially crafted CLI commands.
-
CVE-2025-20278
A vulnerability in the CLI of multiple Cisco Unified Communications products could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device as the root user. This vulnerability is due to improper validation of user-supplied command arguments. An attacker could exploit this vulnerability by executing crafted commands on the CLI of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of an affected device as the root user. To exploit this vulnerability, the attacker must have valid administrative credentials.
-
CVE-2024-53588
A DLL hijacking vulnerability in iTop VPN v16.0 allows attackers to execute arbitrary code via placing a crafted DLL file into the path \ProgramData\iTop VPN\Downloader\vpn6.
-
CVE-2025-12286
A weakness has been identified in VeePN up to 1.6.2. This affects an unknown function of the file C:\Program Files (x86)\VeePN\avservice\avservice.exe of the component AVService. This manipulation causes unquoted search path. The attack requires local access. A high degree of complexity is needed for the attack. The exploitability is reported as difficult. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-20117
A vulnerability in the CLI of Cisco APIC could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root.
-
CVE-2025-2181
A sensitive information disclosure vulnerability in Palo Alto Networks Checkov by Prisma® Cloud can result in the cleartext exposure of Prisma Cloud access keys in Checkov's output.
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.