CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2022-49158
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix warning message due to adisc being flushed Fix warning message due to adisc being flushed. Linux kernel triggered a warning message where a different error code type is not matching up with the expected type. Add additional translation of one error code type to another. WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498 qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1 .. GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000 NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] Call Trace: [c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable) [c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx] [c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx] [c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx] [c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx] [c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120 [c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0 [c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100 [c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40 [c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130 [c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [ c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180 [c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60 [c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20] [c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290 [c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0 [c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330 [c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130 [c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0 [c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278
-
CVE-2022-49157
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5 mb[0-3]=[0xffff 0xffff 0xffff 0xffff]
-
CVE-2022-49074
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix GICR_CTLR.RWP polling It turns out that our polling of RWP is totally wrong when checking for it in the redistributors, as we test the *distributor* bit index, whereas it is a different bit number in the RDs... Oopsie boo. This is embarassing. Not only because it is wrong, but also because it took *8 years* to notice the blunder... Just fix the damn thing.
-
CVE-2025-24117
This issue was addressed with improved redaction of sensitive information. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.4, macOS Sequoia 15.3, visionOS 2.3, watchOS 11.3. An app may be able to fingerprint the user.
-
CVE-2025-22064
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't unregister hook when table is dormant When nf_tables_updchain encounters an error, hook registration needs to be rolled back. This should only be done if the hook has been registered, which won't happen when the table is flagged as dormant (inactive). Just move the assignment into the registration block.
-
CVE-2022-49118
In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Free irq vectors in order for v3 HW If the driver probe fails to request the channel IRQ or fatal IRQ, the driver will free the IRQ vectors before freeing the IRQs in free_irq(), and this will cause a kernel BUG like this: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:369! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: free_msi_irqs+0x118/0x13c pci_disable_msi+0xfc/0x120 pci_free_irq_vectors+0x24/0x3c hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw] local_pci_probe+0x44/0xb0 work_for_cpu_fn+0x20/0x34 process_one_work+0x1d0/0x340 worker_thread+0x2e0/0x460 kthread+0x180/0x190 ret_from_fork+0x10/0x20 ---[ end trace b88990335b610c11 ]--- So we use devm_add_action() to control the order in which we free the vectors.
-
CVE-2022-50669
In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible name leak in ocxl_file_register_afu() If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release().
-
CVE-2025-8745
A vulnerability, which was classified as problematic, has been found in Weee RICEPO App 6.17.77 on Android. This issue affects some unknown processing of the file AndroidManifest.xml of the component com.ricepo.app. The manipulation leads to improper export of android application components. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2025-37998
In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix unsafe attribute parsing in output_userspace() This patch replaces the manual Netlink attribute iteration in output_userspace() with nla_for_each_nested(), which ensures that only well-formed attributes are processed.
-
CVE-2023-52997
In the Linux kernel, the following vulnerability has been resolved: ipv4: prevent potential spectre v1 gadget in ip_metrics_convert() if (!type) continue; if (type > RTAX_MAX) return -EINVAL; ... metrics[type - 1] = val; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content.
-
CVE-2025-21863
In the Linux kernel, the following vulnerability has been resolved: io_uring: prevent opcode speculation sqe->opcode is used for different tables, make sure we santitise it against speculations.
-
CVE-2022-49517
In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.
-
CVE-2022-49460
In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: rk3399_dmc: Disable edev on remove() Otherwise we hit an unablanced enable-count when unbinding the DFI device: [ 1279.659119] ------------[ cut here ]------------ [ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c ... [ 1279.659352] Hardware name: Google Kevin (DT) [ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c [ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28 ... [ 1279.659571] Call trace: [ 1279.659582] devfreq_event_remove_edev+0x84/0x8c [ 1279.659590] devm_devfreq_event_release+0x1c/0x28 [ 1279.659602] release_nodes+0x1cc/0x244 [ 1279.659611] devres_release_all+0x44/0x60 [ 1279.659621] device_release_driver_internal+0x11c/0x1ac [ 1279.659629] device_driver_detach+0x20/0x2c [ 1279.659641] unbind_store+0x7c/0xb0 [ 1279.659650] drv_attr_store+0x2c/0x40 [ 1279.659663] sysfs_kf_write+0x44/0x58 [ 1279.659672] kernfs_fop_write_iter+0xf4/0x190 [ 1279.659684] vfs_write+0x2b0/0x2e4 [ 1279.659693] ksys_write+0x80/0xec [ 1279.659701] __arm64_sys_write+0x24/0x30 [ 1279.659714] el0_svc_common+0xf0/0x1d8 [ 1279.659724] do_el0_svc_compat+0x28/0x3c [ 1279.659738] el0_svc_compat+0x10/0x1c [ 1279.659746] el0_sync_compat_handler+0xa8/0xcc [ 1279.659758] el0_sync_compat+0x188/0x1c0 [ 1279.659768] ---[ end trace cec200e5094155b4 ]---
-
CVE-2022-49462
In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. a6xx_gmu_init() passes the node to of_find_device_by_node() and of_dma_configure(), of_find_device_by_node() will takes its reference, of_dma_configure() doesn't need the node after usage. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49431
In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Add missing of_node_put in iommu_init_early_dart The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak.
-
CVE-2022-49433
In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Prevent use of lock before it is initialized If there is a failure during probe of hfi1 before the sdma_map_lock is initialized, the call to hfi1_free_devdata() will attempt to use a lock that has not been initialized. If the locking correctness validator is on then an INFO message and stack trace resembling the following may be seen: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Call Trace: register_lock_class+0x11b/0x880 __lock_acquire+0xf3/0x7930 lock_acquire+0xff/0x2d0 _raw_spin_lock_irq+0x46/0x60 sdma_clean+0x42a/0x660 [hfi1] hfi1_free_devdata+0x3a7/0x420 [hfi1] init_one+0x867/0x11a0 [hfi1] pci_device_probe+0x40e/0x8d0 The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map memory, and sdma_map is not allocated/initialized until after sdma_map_lock has been initialized. This code only needs to be run if sdma_map is not NULL, and so checking for that condition will avoid trying to use the lock before it is initialized.
-
CVE-2022-49409
In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in __es_tree_search Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/extents_status.c:199! [...] RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline] RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217 [...] Call Trace: ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766 ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561 ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964 ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384 ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567 ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980 ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031 ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257 v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63 v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82 vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368 dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490 ext4_quota_enable fs/ext4/super.c:6137 [inline] ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163 ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754 mount_bdev+0x2e9/0x3b0 fs/super.c:1158 mount_fs+0x4b/0x1e4 fs/super.c:1261 [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_enable_quotas ext4_quota_enable ext4_iget __ext4_iget ext4_ext_check_inode ext4_ext_check __ext4_ext_check ext4_valid_extent_entries Check for overlapping extents does't take effect dquot_enable vfs_load_quota_inode v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent ext4_es_cache_extent __es_tree_search ext4_es_end BUG_ON(es->es_lblk + es->es_len < es->es_lblk) The error ext4 extents is as follows: 0af3 0300 0400 0000 00000000 extent_header 00000000 0100 0000 12000000 extent1 00000000 0100 0000 18000000 extent2 02000000 0400 0000 14000000 extent3 In the ext4_valid_extent_entries function, if prev is 0, no error is returned even if lblock<=prev. This was intended to skip the check on the first extent, but in the error image above, prev=0+1-1=0 when checking the second extent, so even though lblock<=prev, the function does not return an error. As a result, bug_ON occurs in __es_tree_search and the system panics. To solve this problem, we only need to check that: 1. The lblock of the first extent is not less than 0. 2. The lblock of the next extent is not less than the next block of the previous extent. The same applies to extent_idx.
-
CVE-2022-49396
In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp: fix reset-controller leak on probe errors Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly.
-
CVE-2022-49397
In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp: fix struct clk leak on probe errors Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral).
-
CVE-2022-49394
In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix inflight count imbalances and IO hangs on offline iolatency needs to track the number of inflight IOs per cgroup. As this tracking can be expensive, it is disabled when no cgroup has iolatency configured for the device. To ensure that the inflight counters stay balanced, iolatency_set_limit() freezes the request_queue while manipulating the enabled counter, which ensures that no IO is in flight and thus all counters are zero. Unfortunately, iolatency_set_limit() isn't the only place where the enabled counter is manipulated. iolatency_pd_offline() can also dec the counter and trigger disabling. As this disabling happens without freezing the q, this can easily happen while some IOs are in flight and thus leak the counts. This can be easily demonstrated by turning on iolatency on an one empty cgroup while IOs are in flight in other cgroups and then removing the cgroup. Note that iolatency shouldn't have been enabled elsewhere in the system to ensure that removing the cgroup disables iolatency for the whole device. The following keeps flipping on and off iolatency on sda: echo +io > /sys/fs/cgroup/cgroup.subtree_control while true; do mkdir -p /sys/fs/cgroup/test echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency sleep 1 rmdir /sys/fs/cgroup/test sleep 1 done and there's concurrent fio generating direct rand reads: fio --name test --filename=/dev/sda --direct=1 --rw=randread \ --runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k while monitoring with the following drgn script: while True: for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()): for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list): blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node') pd = blkg.pd[prog['blkcg_policy_iolatency'].plid] if pd.value_() == 0: continue iolat = container_of(pd, 'struct iolatency_grp', 'pd') inflight = iolat.rq_wait.inflight.counter.value_() if inflight: print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} ' f'{cgroup_path(css.cgroup).decode("utf-8")}') time.sleep(1) The monitoring output looks like the following: inflight=1 sda /user.slice inflight=1 sda /user.slice ... inflight=14 sda /user.slice inflight=13 sda /user.slice inflight=17 sda /user.slice inflight=15 sda /user.slice inflight=18 sda /user.slice inflight=17 sda /user.slice inflight=20 sda /user.slice inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19 inflight=19 sda /user.slice inflight=19 sda /user.slice If a cgroup with stuck inflight ends up getting throttled, the throttled IOs will never get issued as there's no completion event to wake it up leading to an indefinite hang. This patch fixes the bug by unifying enable handling into a work item which is automatically kicked off from iolatency_set_min_lat_nsec() which is called from both iolatency_set_limit() and iolatency_pd_offline() paths. Punting to a work item is necessary as iolatency_pd_offline() is called under spinlocks while freezing a request_queue requires a sleepable context. This also simplifies the code reducing LOC sans the comments and avoids the unnecessary freezes which were happening whenever a cgroup's latency target is newly set or cleared.
-
CVE-2022-49382
In the Linux kernel, the following vulnerability has been resolved: soc: rockchip: Fix refcount leak in rockchip_grf_init of_find_matching_node_and_match returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49367
In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register(). We don't need the device node after it. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49346
In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49259
In the Linux kernel, the following vulnerability has been resolved: block: don't delete queue kobject before its children kobjects aren't supposed to be deleted before their child kobjects are deleted. Apparently this is usually benign; however, a WARN will be triggered if one of the child kobjects has a named attribute group: sysfs group 'modes' not found for kobject 'crypto' WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80 ... Call Trace: sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312 __kobject_del+0x20/0x80 lib/kobject.c:611 kobject_cleanup+0xa4/0x140 lib/kobject.c:696 kobject_release lib/kobject.c:736 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x53/0x70 lib/kobject.c:753 blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159 blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962 del_gendisk+0x117/0x250 block/genhd.c:610 Fix this by moving the kobject_del() and the corresponding kobject_uevent() to the correct place.
-
CVE-2022-49247
In the Linux kernel, the following vulnerability has been resolved: media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED If the callback 'start_streaming' fails, then all queued buffers in the driver should be returned with state 'VB2_BUF_STATE_QUEUED'. Currently, they are returned with 'VB2_BUF_STATE_ERROR' which is wrong. Fix this. This also fixes the warning: [ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6 [ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14 [ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT) [ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common] [ 65.592395] sp : ffff800012bc3ad0 [ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8 [ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612 [ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0 [ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff [ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78 [ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce [ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228 [ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78 [ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880 [ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0 [ 65.598940] Call trace: [ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common] [ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2] [ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2] [ 65.601103] v4l_streamon+0x3c/0x50 [videodev] [ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev] [ 65.601977] video_usercopy+0x320/0x828 [videodev] [ 65.602419] video_ioctl2+0x3c/0x58 [videodev] [ 65.602830] v4l2_ioctl+0x60/0x90 [videodev] [ 65.603227] __arm64_sys_ioctl+0xa8/0xe0 [ 65.603576] invoke_syscall+0x54/0x118 [ 65.603911] el0_svc_common.constprop.3+0x84/0x100 [ 65.604332] do_el0_svc+0x34/0xa0 [ 65.604625] el0_svc+0x1c/0x50 [ 65.604897] el0t_64_sync_handler+0x88/0xb0 [ 65.605264] el0t_64_sync+0x16c/0x170 [ 65.605587] ---[ end trace 578e0ba07742170d ]---
-
CVE-2022-49248
In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction") while 'deferrable' flag can be uninitialized for non-control/notify AV/C transactions. UBSAN reports it: kernel: ================================================================================ kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9 kernel: load of value 158 is not a valid value for type '_Bool' kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019 kernel: Call Trace: kernel: <IRQ> kernel: show_stack+0x52/0x58 kernel: dump_stack_lvl+0x4a/0x5f kernel: dump_stack+0x10/0x12 kernel: ubsan_epilogue+0x9/0x45 kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49 kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib] kernel: fcp_response+0x28/0x30 [snd_firewire_lib] kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core] kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci] kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci] kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core] kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci] kernel: tasklet_action_common.constprop.0+0xea/0xf0 kernel: tasklet_action+0x22/0x30 kernel: __do_softirq+0xd9/0x2e3 kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0 kernel: do_softirq+0x75/0xa0 kernel: </IRQ> kernel: <TASK> kernel: __local_bh_enable_ip+0x50/0x60 kernel: irq_forced_thread_fn+0x7e/0x90 kernel: irq_thread+0xba/0x190 kernel: ? irq_thread_fn+0x60/0x60 kernel: kthread+0x11e/0x140 kernel: ? irq_thread_check_affinity+0xf0/0xf0 kernel: ? set_kthread_struct+0x50/0x50 kernel: ret_from_fork+0x22/0x30 kernel: </TASK> kernel: ================================================================================ This commit fixes the bug. The bug has no disadvantage for the non- control/notify AV/C transactions since the flag has an effect for AV/C response with INTERIM (0x0f) status which is not used for the transactions in AV/C general specification.
-
CVE-2022-49220
In the Linux kernel, the following vulnerability has been resolved: dax: make sure inodes are flushed before destroy cache A bug can be triggered by following command $ modprobe nd_pmem && modprobe -r nd_pmem [ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown() [ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node) [ 10.062433] Call Trace: [ 10.062673] dump_stack_lvl+0x34/0x44 [ 10.062865] slab_err+0x90/0xd0 [ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0 [ 10.063848] kmem_cache_destroy+0x4a/0x110 [ 10.064058] __x64_sys_delete_module+0x265/0x300 This is caused by dax_fs_exit() not flushing inodes before destroy cache. To fix this issue, call rcu_barrier() before destroy cache.
-
CVE-2022-49212
In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks. Fix it by decrementing the refcount of specific object in those error paths.
-
CVE-2022-49200
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.
-
CVE-2022-49204
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix more uncharged while msg has more_data In tcp_bpf_send_verdict(), if msg has more data after tcp_bpf_sendmsg_redir(): tcp_bpf_send_verdict() tosend = msg->sg.size //msg->sg.size = 22220 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000 goto more_data; tosend = msg->sg.size //msg->sg.size = 11000 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc The msg->sg.size(11000) has been uncharged twice, to fix we can charge the remaining msg->sg.size before goto more data. This issue can cause the following info: WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 ? vfs_write+0x237/0x290 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>
-
CVE-2022-49180
In the Linux kernel, the following vulnerability has been resolved: LSM: general protection fault in legacy_parse_param The usual LSM hook "bail on fail" scheme doesn't work for cases where a security module may return an error code indicating that it does not recognize an input. In this particular case Smack sees a mount option that it recognizes, and returns 0. A call to a BPF hook follows, which returns -ENOPARAM, which confuses the caller because Smack has processed its data. The SELinux hook incorrectly returns 1 on success. There was a time when this was correct, however the current expectation is that it return 0 on success. This is repaired.
-
CVE-2022-49189
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: clk-rcg2: Update logic to calculate D value for RCG The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors. As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range.
-
CVE-2022-49151
In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. We should check that in endpoint is actually present to prevent this warning. Found pipes are now saved to struct mcba_priv and code uses them directly instead of making pipes in place. Fail log: | usb 5-1: BOGUS urb xfer, pipe 3 != type 1 | WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | Modules linked in: | CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0 | Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 | Workqueue: usb_hub_wq hub_event | RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | ... | Call Trace: | <TASK> | mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline] | mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858 | usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 | call_driver_probe drivers/base/dd.c:517 [inline]
-
CVE-2022-49066
In the Linux kernel, the following vulnerability has been resolved: veth: Ensure eth header is in skb's linear part After feeding a decapsulated packet to a veth device with act_mirred, skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(), which expects at least ETH_HLEN byte of linear data (as __dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes unconditionally). Use pskb_may_pull() to ensure veth_xmit() respects this constraint. kernel BUG at include/linux/skbuff.h:2328! RIP: 0010:eth_type_trans+0xcf/0x140 Call Trace: <IRQ> __dev_forward_skb2+0xe3/0x160 veth_xmit+0x6e/0x250 [veth] dev_hard_start_xmit+0xc7/0x200 __dev_queue_xmit+0x47f/0x520 ? skb_ensure_writable+0x85/0xa0 ? skb_mpls_pop+0x98/0x1c0 tcf_mirred_act+0x442/0x47e [act_mirred] tcf_action_exec+0x86/0x140 fl_classify+0x1d8/0x1e0 [cls_flower] ? dma_pte_clear_level+0x129/0x1a0 ? dma_pte_clear_level+0x129/0x1a0 ? prb_fill_curr_block+0x2f/0xc0 ? skb_copy_bits+0x11a/0x220 __tcf_classify+0x58/0x110 tcf_classify_ingress+0x6b/0x140 __netif_receive_skb_core.constprop.0+0x47d/0xfd0 ? __iommu_dma_unmap_swiotlb+0x44/0x90 __netif_receive_skb_one_core+0x3d/0xa0 netif_receive_skb+0x116/0x170 be_process_rx+0x22f/0x330 [be2net] be_poll+0x13c/0x370 [be2net] __napi_poll+0x2a/0x170 net_rx_action+0x22f/0x2f0 __do_softirq+0xca/0x2a8 __irq_exit_rcu+0xc1/0xe0 common_interrupt+0x83/0xa0
-
CVE-2025-64661
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Shell allows an authorized attacker to elevate privileges locally.
-
CVE-2023-53826
In the Linux kernel, the following vulnerability has been resolved: ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show() Wear-leveling entry could be freed in error path, which may be accessed again in eraseblk_count_seq_show(), for example: __erase_worker eraseblk_count_seq_show wl = ubi->lookuptbl[*block_number] if (wl) wl_entry_destroy ubi->lookuptbl[e->pnum] = NULL kmem_cache_free(ubi_wl_entry_slab, e) erase_count = wl->ec // UAF! Wear-leveling entry updating/accessing in ubi->lookuptbl should be protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize wl entry accessing between wl_entry_destroy() and eraseblk_count_seq_show(). Fetch a reproducer in [Link].
-
CVE-2022-50660
In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2200: fix memory leak in ipw_wdev_init() In the error path of ipw_wdev_init(), exception value is returned, and the memory applied for in the function is not released. Also the memory is not released in ipw_pci_probe(). As a result, memory leakage occurs. So memory release needs to be added to the error path of ipw_wdev_init().
-
CVE-2025-62217
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally.
-
CVE-2025-36107
IBM Cognos Analytics Mobile (iOS) 1.1.0 through 1.1.22 could allow malicious actors to obtain sensitive information due to the cleartext transmission of data.
-
CVE-2023-52996
In the Linux kernel, the following vulnerability has been resolved: ipv4: prevent potential spectre v1 gadget in fib_metrics_match() if (!type) continue; if (type > RTAX_MAX) return false; ... fi_val = fi->fib_metrics->metrics[type - 1]; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content.
-
CVE-2023-52992
In the Linux kernel, the following vulnerability has been resolved: bpf: Skip task with pid=1 in send_signal_common() The following kernel panic can be triggered when a task with pid=1 attaches a prog that attempts to send killing signal to itself, also see [1] for more details: Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU: 3 PID: 1 Comm: systemd Not tainted 6.1.0-09652-g59fe41b5255f #148 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x100/0x178 lib/dump_stack.c:106 panic+0x2c4/0x60f kernel/panic.c:275 do_exit.cold+0x63/0xe4 kernel/exit.c:789 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x2460/0x2600 kernel/signal.c:2858 arch_do_signal_or_restart+0x78/0x5d0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd So skip task with pid=1 in bpf_send_signal_common() to avoid the panic. [1] https://lore.kernel.org/bpf/[email protected]
-
CVE-2023-52977
In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix flow memory leak in ovs_flow_cmd_new Syzkaller reports a memory leak of new_flow in ovs_flow_cmd_new() as it is not freed when an allocation of a key fails. BUG: memory leak unreferenced object 0xffff888116668000 (size 632): comm "syz-executor231", pid 1090, jiffies 4294844701 (age 18.871s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000defa3494>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<00000000defa3494>] ovs_flow_alloc+0x19/0x180 net/openvswitch/flow_table.c:77 [<00000000c67d8873>] ovs_flow_cmd_new+0x1de/0xd40 net/openvswitch/datapath.c:957 [<0000000010a539a8>] genl_family_rcv_msg_doit+0x22d/0x330 net/netlink/genetlink.c:739 [<00000000dff3302d>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000dff3302d>] genl_rcv_msg+0x328/0x590 net/netlink/genetlink.c:800 [<000000000286dd87>] netlink_rcv_skb+0x153/0x430 net/netlink/af_netlink.c:2515 [<0000000061fed410>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009dc0f111>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] [<000000009dc0f111>] netlink_unicast+0x545/0x7f0 net/netlink/af_netlink.c:1339 [<000000004a5ee816>] netlink_sendmsg+0x8e7/0xde0 net/netlink/af_netlink.c:1934 [<00000000482b476f>] sock_sendmsg_nosec net/socket.c:651 [inline] [<00000000482b476f>] sock_sendmsg+0x152/0x190 net/socket.c:671 [<00000000698574ba>] ____sys_sendmsg+0x70a/0x870 net/socket.c:2356 [<00000000d28d9e11>] ___sys_sendmsg+0xf3/0x170 net/socket.c:2410 [<0000000083ba9120>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 [<00000000c00628f8>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 [<000000004abfdcf4>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 To fix this the patch rearranges the goto labels to reflect the order of object allocations and adds appropriate goto statements on the error paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
-
CVE-2022-49721
In the Linux kernel, the following vulnerability has been resolved: arm64: ftrace: consistently handle PLTs. Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae9 ---truncated---
-
CVE-2022-49683
In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49646
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix queue selection for mesh/OCB interfaces When using iTXQ, the code assumes that there is only one vif queue for broadcast packets, using the BE queue. Allowing non-BE queue marking violates that assumption and txq->ac == skb_queue_mapping is no longer guaranteed. This can cause issues with queue handling in the driver and also causes issues with the recent ATF change, resulting in an AQL underflow warning.
-
CVE-2022-49624
In the Linux kernel, the following vulnerability has been resolved: net: atlantic: remove aq_nic_deinit() when resume aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110
-
CVE-2022-49537
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix call trace observed during I/O with CMF enabled The following was seen with CMF enabled: BUG: using smp_processor_id() in preemptible code: systemd-udevd/31711 kernel: caller is lpfc_update_cmf_cmd+0x214/0x420 [lpfc] kernel: CPU: 12 PID: 31711 Comm: systemd-udevd kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x44/0x57 kernel: check_preemption_disabled+0xbf/0xe0 kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc] kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc] this_cpu_ptr() calls smp_processor_id() in a preemptible context. Fix by using per_cpu_ptr() with raw_smp_processor_id() instead.
-
CVE-2022-49521
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp() If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a received frame, the frame is dropped and resources are leaked. Fix by returning resources when discarding an unhandled frame type. Update lpfc_fc_frame_check() handling of NOP basic link service.
-
CVE-2022-49514
In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe Call of_node_put(platform_node) to avoid refcount leak in the error path.
-
CVE-2022-49481
In the Linux kernel, the following vulnerability has been resolved: regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt of_node_get() returns a node with refcount incremented. Calling of_node_put() to drop the reference when not needed anymore.
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.