CVEs of 2025.
Every CVE published in 2025 that we hold, ranked by exploit odds.
-
CVE-2025-37878
In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init Move the get_ctx(child_ctx) call and the child_event->ctx assignment to occur immediately after the child event is allocated. Ensure that child_event->ctx is non-NULL before any subsequent error path within inherit_event calls free_event(), satisfying the assumptions of the cleanup code. Details: There's no clear Fixes tag, because this bug is a side-effect of multiple interacting commits over time (up to 15 years old), not a single regression. The code initially incremented refcount then assigned context immediately after the child_event was created. Later, an early validity check for child_event was added before the refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was added, assuming event->ctx is valid if the pmu_ctx is valid. The problem is that the WARN_ON_ONCE() could trigger after the initial check passed but before child_event->ctx was assigned, violating its precondition. The solution is to assign child_event->ctx right after its initial validation. This ensures the context exists for any subsequent checks or cleanup routines, resolving the WARN_ON_ONCE(). To resolve it, defer the refcount update and child_event->ctx assignment directly after child_event->pmu_ctx is set but before checking if the parent event is orphaned. The cleanup routine depends on event->pmu_ctx being non-NULL before it verifies event->ctx is non-NULL. This also maintains the author's original intent of passing in child_ctx to find_get_pmu_context before its refcount/assignment. [ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
-
CVE-2025-37877
In the Linux kernel, the following vulnerability has been resolved: iommu: Clear iommu-dma ops on cleanup If iommu_device_register() encounters an error, it can end up tearing down already-configured groups and default domains, however this currently still leaves devices hooked up to iommu-dma (and even historically the behaviour in this area was at best inconsistent across architectures/drivers...) Although in the case that an IOMMU is present whose driver has failed to probe, users cannot necessarily expect DMA to work anyway, it's still arguable that we should do our best to put things back as if the IOMMU driver was never there at all, and certainly the potential for crashing in iommu-dma itself is undesirable. Make sure we clean up the dev->dma_iommu flag along with everything else.
-
CVE-2025-21872
In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? report_bug+0xff/0x140 ? early_fixup_exception+0x5d/0xb0 ? early_idt_handler_common+0x2f/0x3a ? __early_ioremap+0xef/0x220 ? efi_mokvar_table_init+0xce/0x1d0 ? setup_arch+0x864/0xc10 ? start_kernel+0x6b/0xa10 ? x86_64_start_reservations+0x24/0x30 ? x86_64_start_kernel+0xed/0xf0 ? common_startup_64+0x13e/0x141 </TASK> ---[ end trace 0000000000000000 ]--- mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187. Mapping the entire structure isn't actually necessary, as we don't ever need more than one entry header mapped at once. Changes efi_mokvar_table_init() to only map each entry header, not the entire table, when determining the table size. Since we're not mapping any data past the variable name, it also changes the code to enforce that each variable name is NUL terminated, rather than attempting to verify it in place.
-
CVE-2022-49525
In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix the warning when removing the module When removing the module, we will get the following warning: [ 14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]' [ 14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0 [ 14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0 [ 14.759589] Call Trace: [ 14.759792] <TASK> [ 14.759975] unregister_irq_proc+0x14c/0x170 [ 14.760340] irq_free_descs+0x94/0xe0 [ 14.760640] mp_unmap_irq+0xb6/0x100 [ 14.760937] acpi_unregister_gsi_ioapic+0x27/0x40 [ 14.761334] acpi_pci_irq_disable+0x1d3/0x320 [ 14.761688] pci_disable_device+0x1ad/0x380 [ 14.762027] ? _raw_spin_unlock_irqrestore+0x2d/0x60 [ 14.762442] ? cx25821_shutdown+0x20/0x9f0 [cx25821] [ 14.762848] cx25821_finidev+0x48/0xc0 [cx25821] [ 14.763242] pci_device_remove+0x92/0x240 Fix this by freeing the irq before call pci_disable_device().
-
CVE-2022-49457
In the Linux kernel, the following vulnerability has been resolved: ARM: versatile: Add missing of_node_put in dcscb_init The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak.
-
CVE-2022-49447
In the Linux kernel, the following vulnerability has been resolved: ARM: hisi: Add missing of_node_put after of_find_compatible_node of_find_compatible_node will increment the refcount of the returned device_node. Calling of_node_put() to avoid the refcount leak
-
CVE-2022-49438
In the Linux kernel, the following vulnerability has been resolved: Input: sparcspkr - fix refcount leak in bbc_beep_probe of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49354
In the Linux kernel, the following vulnerability has been resolved: ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() to avoid refcount leak.
-
CVE-2022-49351
In the Linux kernel, the following vulnerability has been resolved: net: altera: Fix refcount leak in altera_tse_mdio_create Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49314
In the Linux kernel, the following vulnerability has been resolved: tty: Fix a possible resource leak in icom_probe When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated.
-
CVE-2022-49216
In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix reference leak in tegra_dsi_ganged_probe The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add put_device() call to fix this.
-
CVE-2022-49185
In the Linux kernel, the following vulnerability has been resolved: pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.
-
CVE-2022-49175
In the Linux kernel, the following vulnerability has been resolved: PM: core: keep irq flags in device_pm_check_callbacks() The function device_pm_check_callbacks() can be called under the spin lock (in the reported case it happens from genpd_add_device() -> dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes. However this function uncoditionally uses spin_lock_irq() / spin_unlock_irq(), thus not preserving the CPU flags. Use the irqsave/irqrestore instead. The backtrace for the reference: [ 2.752010] ------------[ cut here ]------------ [ 2.756769] raw_local_irq_restore() called with IRQs enabled [ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50 [ 2.772338] Modules linked in: [ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684 [ 2.781384] Freeing initrd memory: 46024K [ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50 [ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50 [ 2.785846] sp : ffff80000805b7d0 [ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002 [ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800 [ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00 [ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff [ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7 [ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8 [ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0 [ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0 [ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000 [ 2.889774] Call trace: [ 2.892290] warn_bogus_irq_restore+0x34/0x50 [ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0 [ 2.901690] genpd_unlock_spin+0x20/0x30 [ 2.905724] genpd_add_device+0x100/0x2d0 [ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c [ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190 [ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0 [ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30 [ 2.929102] psci_dt_attach_cpu+0x24/0x90 [ 2.933230] psci_cpuidle_probe+0x2d4/0x46c [ 2.937534] platform_probe+0x68/0xe0 [ 2.941304] really_probe.part.0+0x9c/0x2fc [ 2.945605] __driver_probe_device+0x98/0x144 [ 2.950085] driver_probe_device+0x44/0x15c [ 2.954385] __device_attach_driver+0xb8/0x120 [ 2.958950] bus_for_each_drv+0x78/0xd0 [ 2.962896] __device_attach+0xd8/0x180 [ 2.966843] device_initial_probe+0x14/0x20 [ 2.971144] bus_probe_device+0x9c/0xa4 [ 2.975092] device_add+0x380/0x88c [ 2.978679] platform_device_add+0x114/0x234 [ 2.983067] platform_device_register_full+0x100/0x190 [ 2.988344] psci_idle_init+0x6c/0xb0 [ 2.992113] do_one_initcall+0x74/0x3a0 [ 2.996060] kernel_init_freeable+0x2fc/0x384 [ 3.000543] kernel_init+0x28/0x130 [ 3.004132] ret_from_fork+0x10/0x20 [ 3.007817] irq event stamp: 319826 [ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84 [ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c [ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588 [ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174 [ 3.045607] ---[ end trace 0000000000000000 ]---
-
CVE-2024-57924
In the Linux kernel, the following vulnerability has been resolved: fs: relax assertions on failure to encode file handles Encoding file handles is usually performed by a filesystem >encode_fh() method that may fail for various reasons. The legacy users of exportfs_encode_fh(), namely, nfsd and name_to_handle_at(2) syscall are ready to cope with the possibility of failure to encode a file handle. There are a few other users of exportfs_encode_{fh,fid}() that currently have a WARN_ON() assertion when ->encode_fh() fails. Relax those assertions because they are wrong. The second linked bug report states commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") in v6.6 as the regressing commit, but this is not accurate. The aforementioned commit only increases the chances of the assertion and allows triggering the assertion with the reproducer using overlayfs, inotify and drop_caches. Triggering this assertion was always possible with other filesystems and other reasons of ->encode_fh() failures and more particularly, it was also possible with the exact same reproducer using overlayfs that is mounted with options index=on,nfs_export=on also on kernels < v6.6. Therefore, I am not listing the aforementioned commit as a Fixes commit. Backport hint: this patch will have a trivial conflict applying to v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
-
CVE-2022-50825
In the Linux kernel, the following vulnerability has been resolved: usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak.
-
CVE-2023-53841
In the Linux kernel, the following vulnerability has been resolved: devlink: report devlink_port_type_warn source device devlink_port_type_warn is scheduled for port devlink and warning when the port type is not set. But from this warning it is not easy found out which device (driver) has no devlink port set. [ 3709.975552] Type was not set for devlink port. [ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20 [ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm [ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse [ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1 [ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022 [ 3710.108437] Workqueue: events devlink_port_type_warn [ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20 [ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87 [ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282 [ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027 [ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8 [ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18 [ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600 [ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905 [ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000 [ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0 [ 3710.108456] PKRU: 55555554 [ 3710.108457] Call Trace: [ 3710.108458] <TASK> [ 3710.108459] process_one_work+0x1e2/0x3b0 [ 3710.108466] ? rescuer_thread+0x390/0x390 [ 3710.108468] worker_thread+0x50/0x3a0 [ 3710.108471] ? rescuer_thread+0x390/0x390 [ 3710.108473] kthread+0xdd/0x100 [ 3710.108477] ? kthread_complete_and_exit+0x20/0x20 [ 3710.108479] ret_from_fork+0x1f/0x30 [ 3710.108485] </TASK> [ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]--- After patch: [ 402.473064] ice 0000:41:00.0: Type was not set for devlink port. [ 402.473064] ice 0000:41:00.1: Type was not set for devlink port.
-
CVE-2023-53839
In the Linux kernel, the following vulnerability has been resolved: dccp: fix data-race around dp->dccps_mss_cache dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket. Same thing in do_dccp_getsockopt(). Add READ_ONCE()/WRITE_ONCE() annotations, and change dccp_sendmsg() to check again dccps_mss_cache after socket is locked.
-
CVE-2023-53831
In the Linux kernel, the following vulnerability has been resolved: net: read sk->sk_family once in sk_mc_loop() syzbot is playing with IPV6_ADDRFORM quite a lot these days, and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop() We have many more similar issues to fix. WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260 Modules linked in: CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Workqueue: events_power_efficient gc_worker RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782 Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48 RSP: 0018:ffffc90000388530 EFLAGS: 00010246 RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980 RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011 RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65 R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000 R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000 FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> [<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83 [<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline] [<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342 [<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline] [<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415 [<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247 [<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599 [<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline] [<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683 [<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695
-
CVE-2023-53832
In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null-ptr-deref in raid10_sync_request init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
-
CVE-2023-53825
In the Linux kernel, the following vulnerability has been resolved: kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg(). syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by updating kcm_tx_msg(head)->last_skb if partial data is copied so that the following sendmsg() will resume from the skb. However, we cannot know how many bytes were copied when we get the error. Thus, we could mess up the MSG_MORE queue. When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we do so for UDP by udp_flush_pending_frames(). Even without this change, when the error occurred, the following sendmsg() resumed from a wrong skb and the queue was messed up. However, we have yet to get such a report, and only syzkaller stumbled on it. So, this can be changed safely. Note this does not change SOCK_SEQPACKET behaviour.
-
CVE-2022-49662
In the Linux kernel, the following vulnerability has been resolved: ipv6: fix lockdep splat in in6_dump_addrs() As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0
-
CVE-2022-50070
In the Linux kernel, the following vulnerability has been resolved: mptcp: do not queue data on closed subflows Dipanjan reported a syzbot splat at close time: WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153 inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Modules linked in: uio_ivshmem(OE) uio(E) CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE 5.19.0-rc6-g2eae0556bb9d #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91 f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00 RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002 RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000 R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400 R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258 FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0 Call Trace: <TASK> __sk_destruct+0x4f/0x8e0 net/core/sock.c:2067 sk_destruct+0xbd/0xe0 net/core/sock.c:2112 __sk_free+0xef/0x3d0 net/core/sock.c:2123 sk_free+0x78/0xa0 net/core/sock.c:2134 sock_put include/net/sock.h:1927 [inline] __mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351 __mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828 mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586 process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289 worker_thread+0x623/0x1070 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> The root cause of the problem is that an mptcp-level (re)transmit can race with mptcp_close() and the packet scheduler checks the subflow state before acquiring the socket lock: we can try to (re)transmit on an already closed ssk. Fix the issue checking again the subflow socket status under the subflow socket lock protection. Additionally add the missing check for the fallback-to-tcp case.
-
CVE-2022-49991
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code.
-
CVE-2025-37822
In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up.
-
CVE-2025-38575
In the Linux kernel, the following vulnerability has been resolved: ksmbd: use aead_request_free to match aead_request_alloc Use aead_request_free() instead of kfree() to properly free memory allocated by aead_request_alloc(). This ensures sensitive crypto data is zeroed before being freed.
-
CVE-2025-21710
In the Linux kernel, the following vulnerability has been resolved: tcp: correct handling of extreme memory squeeze Testing with iperf3 using the "pasta" protocol splicer has revealed a problem in the way tcp handles window advertising in extreme memory squeeze situations. Under memory pressure, a socket endpoint may temporarily advertise a zero-sized window, but this is not stored as part of the socket data. The reasoning behind this is that it is considered a temporary setting which shouldn't influence any further calculations. However, if we happen to stall at an unfortunate value of the current window size, the algorithm selecting a new value will consistently fail to advertise a non-zero window once we have freed up enough memory. This means that this side's notion of the current window size is different from the one last advertised to the peer, causing the latter to not send any data to resolve the sitution. The problem occurs on the iperf3 server side, and the socket in question is a completely regular socket with the default settings for the fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket. The following excerpt of a logging session, with own comments added, shows more in detail what is happening: // tcp_v4_rcv(->) // tcp_rcv_established(->) [5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ==== [5201<->39222]: tcp_data_queue(->) [5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0] [OFO queue: gap: 65480, len: 0] [5201<->39222]: tcp_data_queue(<-) [5201<->39222]: __tcp_transmit_skb(->) [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] [5201<->39222]: tcp_select_window(->) [5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] returning 0 [5201<->39222]: tcp_select_window(<-) [5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160 [5201<->39222]: [__tcp_transmit_skb(<-) [5201<->39222]: tcp_rcv_established(<-) [5201<->39222]: tcp_v4_rcv(<-) // Receive queue is at 85 buffers and we are out of memory. // We drop the incoming buffer, although it is in sequence, and decide // to send an advertisement with a window of zero. // We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means // we unconditionally shrink the window. [5201<->39222]: tcp_recvmsg_locked(->) [5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160 [5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368] [5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0] [5201<->39222]: NOT calling tcp_send_ack() [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] [5201<->39222]: __tcp_cleanup_rbuf(<-) [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0] returning 6104 bytes [5201<->39222]: tcp_recvmsg_locked(<-) // After each read, the algorithm for calculating the new receive // window in __tcp_cleanup_rbuf() finds it is too small to advertise // or to update tp->rcv_wnd. // Meanwhile, the peer thinks the window is zero, and will not send // any more data to trigger an update from the interrupt mode side. [5201<->39222]: tcp_recvmsg_locked(->) [5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160 [5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_n ---truncated---
-
CVE-2024-57999
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well.
-
CVE-2023-54071
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use work to update rate to avoid RCU warning The ieee80211_ops::sta_rc_update must be atomic, because ieee80211_chan_bw_change() holds rcu_read lock while calling drv_sta_rc_update(), so create a work to do original things. Voluntary context switch within RCU read-side critical section! WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x571/0x5d0 CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G W OE Workqueue: phy3 ieee80211_chswitch_work [mac80211] RIP: 0010:rcu_note_context_switch+0x571/0x5d0 Call Trace: <TASK> __schedule+0xb0/0x1460 ? __mod_timer+0x116/0x360 schedule+0x5a/0xc0 schedule_timeout+0x87/0x150 ? trace_raw_output_tick_stop+0x60/0x60 wait_for_completion_timeout+0x7b/0x140 usb_start_wait_urb+0x82/0x160 [usbcore usb_control_msg+0xe3/0x140 [usbcore rtw_usb_read+0x88/0xe0 [rtw_usb rtw_usb_read8+0xf/0x10 [rtw_usb rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core drv_sta_rc_update+0x7c/0x160 [mac80211 ieee80211_chan_bw_change+0xfb/0x110 [mac80211 ieee80211_change_chanctx+0x38/0x130 [mac80211 ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211 ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211 ieee80211_chswitch_work+0x95/0x170 [mac80211 process_one_work+0x201/0x410 worker_thread+0x4a/0x3b0 ? process_one_work+0x410/0x410 kthread+0xe1/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK>
-
CVE-2025-21976
In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer.
-
CVE-2022-49726
In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean)
-
CVE-2022-49723
In the Linux kernel, the following vulnerability has been resolved: drm/i915/reset: Fix error_state_read ptr + offset use Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel ---truncated---
-
CVE-2022-49697
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix request_sock leak in sk lookup helpers A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction.
-
CVE-2022-49663
In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header was not set") caught a bug in skb_tunnel_check_pmtu(), as shown in this syzbot report [1]. In ndo_start_xmit() paths, there is really no need to use skb->mac_header, because skb->data is supposed to point at it. [1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Modules linked in: CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted 5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline] RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00 RSP: 0018:ffffc90002e4f520 EFLAGS: 00010212 RAX: 0000000000000324 RBX: ffff88804d5fd500 RCX: ffffc90005b52000 RDX: 0000000000040000 RSI: ffffffff87f05e3e RDI: 0000000000000003 RBP: ffffc90002e4f650 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: 000000000000ffff R13: 0000000000000000 R14: 000000000000ffcd R15: 000000000000001f FS: 00007f3babba9700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000075319000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> geneve_xmit_skb drivers/net/geneve.c:927 [inline] geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107 __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] __dev_direct_xmit+0x500/0x730 net/core/dev.c:4309 dev_direct_xmit include/linux/netdevice.h:3007 [inline] packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282 packet_snd net/packet/af_packet.c:3073 [inline] packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2489 ___sys_sendmsg+0xf3/0x170 net/socket.c:2543 __sys_sendmsg net/socket.c:2572 [inline] __do_sys_sendmsg net/socket.c:2581 [inline] __se_sys_sendmsg net/socket.c:2579 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3baaa89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3babba9168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3baab9bf60 RCX: 00007f3baaa89109 RDX: 0000000000000000 RSI: 0000000020000a00 RDI: 0000000000000003 RBP: 00007f3baaae305d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe74f2543f R14: 00007f3babba9300 R15: 0000000000022000 </TASK>
-
CVE-2022-49155
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair() [ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e
-
CVE-2024-56770
In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics.
-
CVE-2022-50777
In the Linux kernel, the following vulnerability has been resolved: net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe of_phy_find_device() return device node with refcount incremented. Call put_device() to relese it when not needed anymore.
-
CVE-2025-25178
Software installed and run as a non-privileged user may conduct improper GPU system calls to cause kernel system memory corruption.
-
CVE-2025-21787
In the Linux kernel, the following vulnerability has been resolved: team: better TEAM_OPTION_TYPE_STRING validation syzbot reported following splat [1] Make sure user-provided data contains one nul byte. [1] BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline] BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714 string_nocheck lib/vsprintf.c:633 [inline] string+0x3ec/0x5f0 lib/vsprintf.c:714 vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843 __request_module+0x252/0x9f0 kernel/module/kmod.c:149 team_mode_get drivers/net/team/team_core.c:480 [inline] team_change_mode drivers/net/team/team_core.c:607 [inline] team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401 team_option_set drivers/net/team/team_core.c:375 [inline] team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:733 ____sys_sendmsg+0x877/0xb60 net/socket.c:2573 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627 __sys_sendmsg net/socket.c:2659 [inline] __do_sys_sendmsg net/socket.c:2664 [inline] __se_sys_sendmsg net/socket.c:2662 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f
-
CVE-2022-49511
In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: fix the pagelist corruption Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwrite+0x57/0xc0 do_wp_page+0x278/0x2f0 __handle_mm_fault+0xdc2/0x1590 handle_mm_fault+0xdd/0x2c0 do_user_addr_fault+0x1d3/0x650 exc_page_fault+0x77/0x180 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fd98fc8fad1 == Figure out the race happens when one process is adding &page->lru into the pagelist tail in fb_deferred_io_mkwrite(), another process is re-initializing the same &page->lru in fb_deferred_io_fault(), which is not protected by the lock. This fix is to init all the page lists one time during initialization, it not only fixes the list corruption, but also avoids INIT_LIST_HEAD() redundantly. V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)
-
CVE-2022-49456
In the Linux kernel, the following vulnerability has been resolved: bonding: fix missed rcu protection When removing the rcu_read_lock in bond_ethtool_get_ts_info() as discussed [1], I didn't notice it could be called via setsockopt, which doesn't hold rcu lock, as syzbot pointed: stack backtrace: CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline] bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595 __ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554 ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568 sock_timestamping_bind_phc net/core/sock.c:869 [inline] sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916 sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221 __sys_setsockopt+0x55e/0x6a0 net/socket.c:2223 __do_sys_setsockopt net/socket.c:2238 [inline] __se_sys_setsockopt net/socket.c:2235 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2235 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8902c8eb39 Fix it by adding rcu_read_lock and take a ref on the real_dev. Since dev_hold() and dev_put() can take NULL these days, we can skip checking if real_dev exist. [1] https://lore.kernel.org/netdev/27565.1642742439@famine/
-
CVE-2022-49172
In the Linux kernel, the following vulnerability has been resolved: parisc: Fix non-access data TLB cache flush faults When a page is not present, we get non-access data TLB faults from the fdc and fic instructions in flush_user_dcache_range_asm and flush_user_icache_range_asm. When these occur, the cache line is not invalidated and potentially we get memory corruption. The problem was hidden by the nullification of the flush instructions. These faults also affect performance. With pa8800/pa8900 processors, there will be 32 faults per 4 KB page since the cache line is 128 bytes. There will be more faults with earlier processors. The problem is fixed by using flush_cache_pages(). It does the flush using a tmp alias mapping. The flush_cache_pages() call in flush_cache_range() flushed too large a range. V2: Remove unnecessary preempt_disable() and preempt_enable() calls.
-
CVE-2022-49167
In the Linux kernel, the following vulnerability has been resolved: btrfs: do not double complete bio on errors during compressed reads I hit some weird panics while fixing up the error handling from btrfs_lookup_bio_sums(). Turns out the compression path will complete the bio we use if we set up any of the compression bios and then return an error, and then btrfs_submit_data_bio() will also call bio_endio() on the bio. Fix this by making btrfs_submit_compressed_read() responsible for calling bio_endio() on the bio if there are any errors. Currently it was only doing it if we created the compression bios, otherwise it was depending on btrfs_submit_data_bio() to do the right thing. This creates the above problem, so fix up btrfs_submit_compressed_read() to always call bio_endio() in case of an error, and then simply return from btrfs_submit_data_bio() if we had to call btrfs_submit_compressed_read().
-
CVE-2025-55328
Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Hyper-V allows an authorized attacker to elevate privileges locally.
-
CVE-2025-49678
Null pointer dereference in Windows NTFS allows an authorized attacker to elevate privileges locally.
-
CVE-2022-49500
In the Linux kernel, the following vulnerability has been resolved: wl1251: dynamically allocate memory used for DMA With introduction of vmap'ed stacks, stack parameters can no longer be used for DMA and now leads to kernel panic. It happens at several places for the wl1251 (e.g. when accessed through SDIO) making it unuseable on e.g. the OpenPandora. We solve this by allocating temporary buffers or use wl1251_read32(). Tested on v5.18-rc5 with OpenPandora.
-
CVE-2022-49437
In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: Fix refcount leak in xive_spapr_init of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.
-
CVE-2022-49269
In the Linux kernel, the following vulnerability has been resolved: can: isotp: sanitize CAN ID checks in isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks.
-
CVE-2022-49227
In the Linux kernel, the following vulnerability has been resolved: igc: avoid kernel warning when changing RX ring parameters Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sendmsg+0x23f/0x480 [ 225.198663] sock_sendmsg+0x5b/0x60 [ 225.198667] __sys_sendto+0xf0/0x160 [ 225.198671] ? handle_mm_fault+0xb2/0x280 [ 225.198676] ? do_user_addr_fault+0x1eb/0x690 [ 225.198680] __x64_sys_sendto+0x20/0x30 [ 225.198683] do_syscall_64+0x38/0x90 [ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 225.198693] RIP: 0033:0x7f7ae38ac3aa igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info. Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources.
-
CVE-2022-49192
In the Linux kernel, the following vulnerability has been resolved: drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync when successful. pm_runtime_get_sync returns -error code on failure and 0 on successful resume but also 1 when the device is already active. So the common case for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls to pm_runtime_put in the call-chain so that pm_runtime_put is called one too many times and as result leaving the cpsw dev behind suspended. The suspended cpsw dev leads to an access violation later on by different parts of the cpsw driver. Fix this by calling the return-friendly pm_runtime_resume_and_get function.
-
CVE-2022-49183
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix ref leak when switching zones When switching zones or network namespaces without doing a ct clear in between, it is now leaking a reference to the old ct entry. That's because tcf_ct_skb_nfct_cached() returns false and tcf_ct_flow_table_lookup() may simply overwrite it. The fix is to, as the ct entry is not reusable, free it already at tcf_ct_skb_nfct_cached().
CVE records published in 2025 (ids starting CVE-2025-), sorted by how likely they are to be exploited.