CVEs of 2024.
Every CVE published in 2024 that we hold, ranked by exploit odds.
-
CVE-2024-45887
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `doOpenVPN.`
-
CVE-2024-45890
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `download_ovpn.`
-
CVE-2024-45884
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `setSWMGroup.`
-
CVE-2024-7832
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this issue is the function cgi_get_fullscreen_photos of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument user leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
-
CVE-2023-24331
Command Injection vulnerability in D-Link Dir 816 with firmware version DIR-816_A2_v1.10CNB04 allows attackers to run arbitrary commands via the urlAdd parameter.
-
CVE-2024-48630
D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain a command injection vulnerability via the MacAddress parameter in the SetMACFilters2 function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.
-
CVE-2024-48632
D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the LocalIPAddress, TCPPorts, and UDPPorts parameters in the SetPortForwardingSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.
-
CVE-2024-48633
D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the ExternalPort, InternalPort, ProtocolNumber, and LocalIPAddress parameters in the SetVirtualServerSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.
-
CVE-2024-8460
A vulnerability, which was classified as problematic, has been found in D-Link DNS-320 2.02b01. Affected by this issue is some unknown functionality of the file /cgi-bin/widget_api.cgi of the component Web Management Interface. The manipulation of the argument getHD/getSer/getSys leads to information disclosure. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
-
CVE-2024-37400
An out of bounds read in Ivanti Connect Secure before version 22.7R2.3 allows a remote unauthenticated attacker to trigger an infinite loop, causing a denial of service.
-
CVE-2024-6814
NETGEAR ProSAFE Network Management System getFilterString SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the getFilterString method. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-23399.
-
CVE-2024-51186
D-Link DIR-820L 1.05b03 was discovered to contain a remote code execution (RCE) vulnerability via the ping_addr parameter in the ping_v4 and ping_v6 functions.
-
CVE-2024-41314
TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.
-
CVE-2024-42633
A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.
-
CVE-2023-32462
Dell OS10 Networking Switches running 10.5.2.x and above contain an OS command injection vulnerability when using remote user authentication. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands and possible system takeover. This is a critical vulnerability as it allows an attacker to cause severe damage. Dell recommends customers to upgrade at the earliest opportunity.
-
CVE-2024-6342
**UNSUPPORTED WHEN ASSIGNED** A command injection vulnerability in the export-cgi program of Zyxel NAS326 firmware versions through V5.21(AAZF.18)C0 and NAS542 firmware versions through V5.21(ABAG.15)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted HTTP POST request.
-
CVE-2024-39962
D-Link DIR-823X AX3000 Dual-Band Gigabit Wireless Router v21_D240126 was discovered to contain a remote code execution (RCE) vulnerability in the ntp_zone_val parameter at /goform/set_ntp. This vulnerability is exploited via a crafted HTTP request.
-
CVE-2024-45888
DrayTek Vigor3900 1.5.1.3 contains a command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `set_ap_map_config.'
-
CVE-2024-41622
D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the tomography_ping_address parameter in /HNAP1/ interface.
-
CVE-2023-51984
D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.
-
CVE-2024-9565
A vulnerability has been found in D-Link DIR-605L 2.13B01 BETA and classified as critical. Affected by this vulnerability is the function formSetPassword of the file /goform/formSetPassword. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-9681
When curl is asked to use HSTS, the expiry time for a subdomain might overwrite a parent domain's cache entry, making it end sooner or later than otherwise intended. This affects curl using applications that enable HSTS and use URLs with the insecure `HTTP://` scheme and perform transfers with hosts like `x.example.com` as well as `example.com` where the first host is a subdomain of the second host. (The HSTS cache either needs to have been populated manually or there needs to have been previous HTTPS accesses done as the cache needs to have entries for the domains involved to trigger this problem.) When `x.example.com` responds with `Strict-Transport-Security:` headers, this bug can make the subdomain's expiry timeout *bleed over* and get set for the parent domain `example.com` in curl's HSTS cache. The result of a triggered bug is that HTTP accesses to `example.com` get converted to HTTPS for a different period of time than what was asked for by the origin server. If `example.com` for example stops supporting HTTPS at its expiry time, curl might then fail to access `http://example.com` until the (wrongly set) timeout expires. This bug can also expire the parent's entry *earlier*, thus making curl inadvertently switch back to insecure HTTP earlier than otherwise intended.
-
CVE-2024-44342
D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.
-
CVE-2024-42509
Command injection vulnerability in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
-
CVE-2024-5295
D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.
-
CVE-2024-5291
D-Link DIR-2150 GetDeviceSettings Target Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21235.
-
CVE-2024-13030
A vulnerability was found in D-Link DIR-823G 1.0.2B05_20181207. It has been rated as critical. This issue affects the function SetAutoRebootSettings/SetClientInfo/SetDMZSettings/SetFirewallSettings/SetParentsControlInfo/SetQoSSettings/SetVirtualServerSettings of the file /HNAP1/ of the component Web Management Interface. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-44845
DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.
-
CVE-2024-9564
A vulnerability, which was classified as critical, was found in D-Link DIR-605L 2.13B01 BETA. Affected is the function formWlanWizardSetup of the file /goform/formWlanWizardSetup. The manipulation of the argument webpage leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-38649
An out-of-bounds write in IPsec of Ivanti Connect Secure before version 22.7R2.1(Not Applicable to 9.1Rx) allows a remote unauthenticated attacker to cause a denial of service.
-
CVE-2024-24321
An issue in Dlink DIR-816A2 v.1.10CNB05 allows a remote attacker to execute arbitrary code via the wizardstep4_ssid_2 parameter in the sub_42DA54 function.
-
CVE-2022-20871
A vulnerability in the web management interface of Cisco AsyncOS for Cisco Secure Web Appliance, formerly Cisco Web Security Appliance (WSA), could allow an authenticated, remote attacker to perform a command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface. An attacker could exploit this vulnerability by authenticating to the system and sending a crafted HTTP packet to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root. To successfully exploit this vulnerability, an attacker would need at least read-only credentials.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.Attention: Simplifying the Cisco portfolio includes the renaming of security products under one brand: Cisco Secure. For more information, see .
-
CVE-2024-45694
The web service of certain models of D-Link wireless routers contains a Stack-based Buffer Overflow vulnerability, which allows unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.
-
CVE-2024-44844
DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.
-
CVE-2024-8075
A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this vulnerability is the function setDiagnosisCfg. The manipulation leads to os command injection. The attack can be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-39710
Argument injection in Ivanti Connect Secure before version 22.7R2.1 and 9.1R18.7 and Ivanti Policy Secure before version 22.7R1.1 allows a remote authenticated attacker with admin privileges to achieve remote code execution.
-
CVE-2024-12344
A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-35522
Netgear EX3700 ' AC750 WiFi Range Extender Essentials Edition before 1.0.0.98 contains an authenticated command injection in operating_mode.cgi via the ap_mode parameter with ap_24g_manual set to 1 and ap_24g_manual_sec set to NotNone.
-
CVE-2024-29014
Vulnerability in SonicWall SMA100 NetExtender Windows (32 and 64-bit) client 10.2.339 and earlier versions allows an attacker to arbitrary code execution when processing an EPC Client update.
-
CVE-2024-8461
A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
-
CVE-2024-6813
NETGEAR ProSAFE Network Management System getSortString SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the getSortString method. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-23207.
-
CVE-2024-11634
Command injection in Ivanti Connect Secure before version 22.7R2.3 and Ivanti Policy Secure before version 22.7R1.2 allows a remote authenticated attacker with admin privileges to achieve remote code execution. (Not applicable to 9.1Rx)
-
CVE-2024-44341
D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.
-
CVE-2024-7831
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this vulnerability is the function cgi_get_cooliris of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument path leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
-
CVE-2024-7829
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_del_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
-
CVE-2024-7830
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_move_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument photo_name leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
-
CVE-2024-5299
D-Link D-View execMonitorScript Exposed Dangerous Method Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the execMonitorScript method. The issue results from an exposed dangerous method. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21828.
-
CVE-2024-8321
Missing authentication in Network Isolation of Ivanti EPM before 2022 SU6, or the 2024 September update allows a remote unauthenticated attacker to isolate managed devices from the network.
-
CVE-2024-9915
A vulnerability classified as critical was found in D-Link DIR-619L B1 2.06. Affected by this vulnerability is the function formVirtualServ of the file /goform/formVirtualServ. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-37377
A heap-based buffer overflow in IPsec of Ivanti Connect Secure before version 22.7R2.3 allows a remote unauthenticated attacker to cause a denial of service.
CVE records published in 2024 (ids starting CVE-2024-), sorted by how likely they are to be exploited.