CVEs of 2024.
Every CVE published in 2024 that we hold, ranked by exploit odds.
-
CVE-2024-5913
An improper input validation vulnerability in Palo Alto Networks PAN-OS software enables an attacker with the ability to tamper with the physical file system to elevate privileges.
-
CVE-2024-31496
A stack-based buffer overflow vulnerability [CWE-121] in Fortinet FortiManager version 7.4.0 through 7.4.2 and before 7.2.5, FortiAnalyzer version 7.4.0 through 7.4.2 and before 7.2.5 and FortiAnalyzer-BigData 7.4.0 and before 7.2.7 allows a privileged attacker to execute unauthorized code or commands via crafted CLI requests.
-
CVE-2024-23456
Anti-tampering can be disabled under certain conditions without signature validation. This affects Zscaler Client Connector <4.2.0.190 with anti-tampering enabled.
-
CVE-2024-39536
A Missing Release of Memory after Effective Lifetime vulnerability in the Periodic Packet Management Daemon (ppmd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS). When a BFD session configured with authentication flaps, ppmd memory can leak. Whether the leak happens depends on a race condition which is outside the attackers control. This issue only affects BFD operating in distributed aka delegated (which is the default behavior) or inline mode. Whether the leak occurs can be monitored with the following CLI command: > show ppm request-queue FPC Pending-request fpc0 2 request-total-pending: 2 where a continuously increasing number of pending requests is indicative of the leak. This issue affects: Junos OS: * All versions before 21.2R3-S8, * 21.4 versions before 21.4R3-S7, * 22.1 versions before 22.1R3-S4, * 22.2 versions before 22.2R3-S4, * 22.3 versions before 22.3R3, * 22.4 versions before 22.4R2-S2, 22.4R3. Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * 21.4-EVO versions before 21.4R3-S7-EVO, * 22.2-EVO versions before 22.2R3-S4-EVO, * 22.3-EVO versions before 22.3R3-EVO, * 22.4-EVO versions before 22.4R3-EVO.
-
CVE-2020-12484
When using special mode to connect to enterprise wifi, certain options are not properly configured and attackers can pretend to be enterprise wifi through a carefully constructed wifi with the same name, which can lead to man-in-the-middle attacks.
-
CVE-2024-51399
Altai Technologies Ltd Altai IX500 Indoor 22 802.11ac Wave 2 AP After login, there are file reads in the background, and attackers can obtain sensitive information such as user credentials, system configuration, and database connection strings, which can lead to data breaches and identity theft.
-
CVE-2024-29213
Ivanti DSM < version 2024.2 allows authenticated users on the local machine to run code with elevated privileges due to insecure ACL via unspecified attack vector.
-
CVE-2024-29821
Ivanti DSM < version 2024.2 allows authenticated users on the local machine to run code with elevated privileges due to insecure ACL via unspecified attack vector.
-
CVE-2024-20496
A vulnerability in the UDP packet validation code of Cisco SD-WAN vEdge Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to incorrect handling of a specific type of malformed UDP packet. An attacker in a machine-in-the-middle position could exploit this vulnerability by sending crafted UDP packets to an affected device. A successful exploit could allow the attacker to cause the device to reboot, resulting in a DoS condition on the affected system.
-
CVE-2022-43935
An information exposure through log file vulnerability exists in Brocade SANnav before Brocade SANnav 2.2.2, where Brocade Fabric OS Switch passwords and authorization IDs are printed in the embedded MLS DB file.
-
CVE-2024-47906
Excessive binary privileges in Ivanti Connect Secure before version 22.7R2.3 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.2 (Not Applicable to 9.1Rx) allows a local authenticated attacker to escalate privileges.
-
CVE-2024-54749
Ubiquiti U7-Pro 7.0.35 was discovered to contain a hardcoded password vulnerability in /etc/shadow, which allows attackers to log in as root. NOTE: this is disputed by the Supplier because the observation only established that a password is present in a firmware image; however, the device cannot be deployed without setting a new password during installation.
-
CVE-2024-39539
A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS). In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart. This issue affects Junos OS on MX Series: * All version before 21.2R3-S6, * 21.4 versions before 21.4R3-S6, * 22.1 versions before 22.1R3-S5, * 22.2 versions before 22.2R3-S3, * 22.3 versions before 22.3R3-S2, * 22.4 versions before 22.4R3, * 23.2 versions before 23.2R2.
-
CVE-2024-44540
Ubiquiti AirMax firmware version firmware version 8 allows attackers with physical access to gain a privileged command shell via the UART Debugging Port.
-
CVE-2024-39512
An Improper Physical Access Control vulnerability in the console port control of Juniper Networks Junos OS Evolved allows an attacker with physical access to the device to get access to a user account. When the console cable is disconnected, the logged in user is not logged out. This allows a malicious attacker with physical access to the console to resume a previous session and possibly gain administrative privileges. This issue affects Junos OS Evolved: * from 23.2R2-EVO before 23.2R2-S1-EVO, * from 23.4R1-EVO before 23.4R2-EVO.
-
CVE-2024-20412
A vulnerability in Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 1000, 2100, 3100, and 4200 Series could allow an unauthenticated, local attacker to access an affected system using static credentials. This vulnerability is due to the presence of static accounts with hard-coded passwords on an affected system. An attacker could exploit this vulnerability by logging in to the CLI of an affected device with these credentials. A successful exploit could allow the attacker to access the affected system and retrieve sensitive information, perform limited troubleshooting actions, modify some configuration options, or render the device unable to boot to the operating system, requiring a reimage of the device.
-
CVE-2024-44997
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_wed: fix use-after-free panic in mtk_wed_setup_tc_block_cb() When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... ---------
-
CVE-2024-47799
Exposure of sensitive system information to an unauthorized control sphere issue exists in Mesh Wi-Fi router RP562B firmware version v1.0.2 and earlier. If this vulnerability is exploited, a network-adjacent authenticated attacker may obtain information of the other devices connected through the Wi-Fi.
-
CVE-2024-20398
A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to obtain read/write file system access on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root.
-
CVE-2024-38270
An insufficient entropy vulnerability caused by the improper use of a randomness function with low entropy for web authentication tokens generation exists in the Zyxel GS1900-10HP firmware version V2.80(AAZI.0)C0. This vulnerability could allow a LAN-based attacker a slight chance to gain a valid session token if multiple authenticated sessions are alive.
-
CVE-2024-32765
A vulnerability has been reported to affect Network & Virtual Switch. If exploited, the vulnerability could allow local authenticated administrators to gain access to and execute certain functions via unspecified vectors. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later
-
CVE-2024-36473
Trend Micro VPN Proxy One Pro, version 5.8.1012 and below is vulnerable to an arbitrary file overwrite or create attack but is limited to local Denial of Service (DoS) and under specific conditions can lead to elevation of privileges.
-
CVE-2024-56170
A validation integrity issue was discovered in Fort through 1.6.4 before 2.0.0. RPKI manifests are listings of relevant files that clients are supposed to verify. Assuming everything else is correct, the most recent version of a manifest should be prioritized over other versions, to prevent replays, accidental or otherwise. Manifests contain the manifestNumber and thisUpdate fields, which can be used to gauge the relevance of a given manifest, when compared to other manifests. The former is a serial-like sequential number, and the latter is the date on which the manifest was created. However, the product does not compare the up-to-dateness of the most recently fetched manifest against the cached manifest. As such, it's prone to a rollback to a previous version if it's served a valid outdated manifest. This leads to outdated route origin validation.
-
CVE-2023-20090
A vulnerability in Cisco TelePresence CE and RoomOS could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to improper access control on certain CLI commands. An attacker could exploit this vulnerability by running a series of crafted commands. A successful exploit could allow the attacker to elevate privileges to root. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-40883
Cross-site request forgery vulnerability exists in ELECOM wireless LAN routers. Viewing a malicious page while logging in to the affected product with an administrative privilege, the user may be directed to perform unintended operations such as changing the login ID, login password, etc.
-
CVE-2024-38296
Dell Edge Gateway 3200, versions prior to 15.40.30.2879, and Edge Gateway 5200, versions prior to 12.0.94.2380, contain an Exposure of Sensitive Information in Shared Microarchitectural Structures during Transient Execution vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to information exposure.
-
CVE-2024-37380
A misconfiguration on UniFi U6+ Access Point could cause an incorrect VLAN traffic forwarding to APs meshed to UniFi U6+ Access Point. Affected Products: UniFi U6+ Access Point (Version 6.6.65 and earlier) Mitigation: Update your UniFi U6+ Access Point to Version 6.6.74 or later.
-
CVE-2024-7245
Panda Security Dome VPN Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Panda Security Dome. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the Hydra Sdk Windows Service. The issue lies in the lack of proper permissions set on a folder created by the service. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-23429.
-
CVE-2024-5631
Longse NVR (Network Video Recorder) model NVR3608PGE2W, as well as products based on this device, are transmitting user's login and password to a remote control service without using any encryption. This enables an on-path attacker to eavesdrop the credentials and subsequently obtain access to the video stream. The credentials are being sent when a user decides to change his password in router's portal.
-
CVE-2024-41684
This vulnerability exists in SyroTech SY-GPON-1110-WDONT Router due to missing secure flag for the session cookies associated with the router's web management interface. An attacker with remote access could exploit this by intercepting transmission within an HTTP session on the vulnerable system. Successful exploitation of this vulnerability could allow the attacker to capture cookies and compromise the targeted system.
-
CVE-2024-28883
An origin validation vulnerability exists in BIG-IP APM browser network access VPN client for Windows, macOS and Linux which may allow an attacker to bypass F5 endpoint inspection. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
-
CVE-2024-29075
Active debug code vulnerability exists in Mesh Wi-Fi router RP562B firmware version v1.0.2 and earlier. If this vulnerability is exploited, a network-adjacent authenticated attacker may obtain or alter the settings of the device .
-
CVE-2024-23107
An exposure of sensitive information to an unauthorized actor vulnerability [CWE-200] in FortiWeb version 7.4.0, version 7.2.4 and below, version 7.0.8 and below, 6.3 all versions may allow an authenticated attacker to read password hashes of other administrators via CLI commands.
-
CVE-2023-50178
An improper certificate validation vulnerability [CWE-295] in FortiADC 7.4.0, 7.2.0 through 7.2.3, 7.1 all versions, 7.0 all versions, 6.2 all versions, 6.1 all versions and 6.0 all versions may allow a remote and unauthenticated attacker to perform a Man-in-the-Middle attack on the communication channel between the device and various remote servers such as private SDN connectors and FortiToken Cloud.
-
CVE-2024-20366
A vulnerability in the Tail-f High Availability Cluster Communications (HCC) function pack of Cisco Crosswork Network Services Orchestrator (NSO) could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability exists because a user-controlled search path is used to locate executable files. An attacker could exploit this vulnerability by configuring the application in a way that causes a malicious file to be executed. A successful exploit could allow the attacker to execute arbitrary code on an affected device as the root user. To exploit this vulnerability, the attacker would need valid credentials on an affected device.
-
CVE-2023-20039
A vulnerability in Cisco IND could allow an authenticated, local attacker to read application data. This vulnerability is due to insufficient default file permissions that are applied to the application data directory. An attacker could exploit this vulnerability by accessing files in the application data directory. A successful exploit could allow the attacker to view sensitive information. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2023-20093
Three vulnerabilities in the CLI of Cisco TelePresence CE and RoomOS could allow an authenticated, local attacker to overwrite arbitrary files on the local file system of an affected device. These vulnerabilities are due to improper access controls on files that are on the local file system. An attacker could exploit these vulnerabilities by placing a symbolic link in a specific location on the local file system of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device. To exploit these vulnerabilities, an attacker would need to have a remote support user account. Note: CVE-2023-20092 does not affect Cisco DX70, DX80, TelePresence MX Series, or TelePresence SX Series devices. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
-
CVE-2023-20091
A vulnerability in the CLI of Cisco TelePresence CE and RoomOS could allow an authenticated, local attacker to overwrite arbitrary files on the local file system of an affected device. This vulnerability is due to improper access controls on files that are on the local file system. An attacker could exploit this vulnerability by placing a symbolic link in a specific location on the local file system of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device. To exploit this vulnerability, an attacker would need to have a remote support user account. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2023-20092
Three vulnerabilities in the CLI of Cisco TelePresence CE and RoomOS could allow an authenticated, local attacker to overwrite arbitrary files on the local file system of an affected device. These vulnerabilities are due to improper access controls on files that are on the local file system. An attacker could exploit these vulnerabilities by placing a symbolic link in a specific location on the local file system of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device. To exploit these vulnerabilities, an attacker would need to have a remote support user account. Note: CVE-2023-20092 does not affect Cisco DX70, DX80, TelePresence MX Series, or TelePresence SX Series devices. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
-
CVE-2023-20004
Three vulnerabilities in the CLI of Cisco TelePresence CE and RoomOS could allow an authenticated, local attacker to overwrite arbitrary files on the local file system of an affected device. These vulnerabilities are due to improper access controls on files that are on the local file system. An attacker could exploit these vulnerabilities by placing a symbolic link in a specific location on the local file system of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device. To exploit these vulnerabilities, an attacker would need to have a remote support user account. Note: CVE-2023-20092 does not affect Cisco DX70, DX80, TelePresence MX Series, or TelePresence SX Series devices. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
-
CVE-2024-20286
A vulnerability in the Python interpreter of Cisco NX-OS Software could allow an authenticated, low-privileged, local attacker to escape the Python sandbox and gain unauthorized access to the underlying operating system of the device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by manipulating specific functions within the Python interpreter. A successful exploit could allow an attacker to escape the Python sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. Note: An attacker must be authenticated with Python execution privileges to exploit these vulnerabilities. For more information regarding Python execution privileges, see product-specific documentation, such as the section of the Cisco Nexus 9000 Series NX-OS Programmability Guide.
-
CVE-2024-20285
A vulnerability in the Python interpreter of Cisco NX-OS Software could allow an authenticated, low-privileged, local attacker to escape the Python sandbox and gain unauthorized access to the underlying operating system of the device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by manipulating specific functions within the Python interpreter. A successful exploit could allow an attacker to escape the Python sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. Note: An attacker must be authenticated with Python execution privileges to exploit these vulnerabilities. For more information regarding Python execution privileges, see product-specific documentation, such as the section of the Cisco Nexus 9000 Series NX-OS Programmability Guide.
-
CVE-2024-20284
A vulnerability in the Python interpreter of Cisco NX-OS Software could allow an authenticated, low-privileged, local attacker to escape the Python sandbox and gain unauthorized access to the underlying operating system of the device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by manipulating specific functions within the Python interpreter. A successful exploit could allow an attacker to escape the Python sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. Note: An attacker must be authenticated with Python execution privileges to exploit these vulnerabilities. For more information regarding Python execution privileges, see product-specific documentation, such as the section of the Cisco Nexus 9000 Series NX-OS Programmability Guide.
-
CVE-2024-20323
A vulnerability in Cisco Intelligent Node (iNode) Software could allow an unauthenticated, remote attacker to hijack the TLS connection between Cisco iNode Manager and associated intelligent nodes and send arbitrary traffic to an affected device. This vulnerability is due to the presence of hard-coded cryptographic material. An attacker in a man-in-the-middle position between Cisco iNode Manager and associated deployed nodes could exploit this vulnerability by using the static cryptographic key to generate a trusted certificate and impersonate an affected device. A successful exploit could allow the attacker to read data that is meant for a legitimate device, modify the startup configuration of an associated node, and, consequently, cause a denial of service (DoS) condition for downstream devices that are connected to the affected node.
-
CVE-2020-26071
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to create or overwrite arbitrary files on an affected device, which could result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation for specific commands. An attacker could exploit this vulnerability by including crafted arguments to those specific commands. A successful exploit could allow the attacker to create or overwrite arbitrary files on the affected device, which could result in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-8424
Improper Privilege Management vulnerability in WatchGuard EPDR, Panda AD360 and Panda Dome on Windows (PSANHost.exe module) allows arbitrary file delete with SYSTEM permissions.
-
CVE-2024-21757
A unverified password change in Fortinet FortiManager versions 7.0.0 through 7.0.10, versions 7.2.0 through 7.2.4, and versions 7.4.0 through 7.4.1, as well as Fortinet FortiAnalyzer versions 7.0.0 through 7.0.10, versions 7.2.0 through 7.2.4, and versions 7.4.0 through 7.4.1, allows an attacker to modify admin passwords via the device configuration backup.
-
CVE-2024-20456
A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Cisco Secure Boot functionality and load unverified software on an affected device. To exploit this successfully, the attacker must have root-system privileges on the affected device. This vulnerability is due to an error in the software build process. An attacker could exploit this vulnerability by manipulating the system’s configuration options to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass of the requirement to run Cisco signed images or alter the security properties of the running system.
-
CVE-2024-38861
Improper Certificate Validation in Checkmk Exchange plugin MikroTik allows attackers in MitM position to intercept traffic. This issue affects MikroTik: from 2.0.0 through 2.5.5, from 0.4a_mk through 2.0a.
-
CVE-2024-33509
An improper certificate validation vulnerability [CWE-295] in FortiWeb 7.2.0 through 7.2.1, 7.0 all versions, 6.4 all versions and 6.3 all versions may allow a remote and unauthenticated attacker in a Man-in-the-Middle position to decipher and/or tamper with the communication channel between the device and different endpoints used to fetch data for Web Application Firewall (WAF).
CVE records published in 2024 (ids starting CVE-2024-), sorted by how likely they are to be exploited.