CVEs of 2024.
Every CVE published in 2024 that we hold, ranked by exploit odds.
-
CVE-2024-51010
Netgear R8500 v1.0.2.160, XR300 v1.0.3.78, R7000P v1.3.3.154, and R6400 v2 1.0.4.128 were discovered to contain a command injection vulnerability in the component ap_mode.cgi via the apmode_gateway parameter. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2024-50993
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the sysNewPasswd parameter at admin_account.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2024-38449
A Directory Traversal vulnerability in KasmVNC 1.3.1.230e50f7b89663316c70de7b0e3db6f6b9340489 and possibly earlier versions allows remote authenticated attackers to browse parent directories and read the content of files outside the scope of the application.
-
CVE-2024-41630
Stack-based buffer overflow vulnerability in Tenda AC18 V15.03.3.10_EN allows a remote attacker to execute arbitrary code via the ssid parameter at ip/goform/fast_setting_wifi_set.
-
CVE-2024-45623
D-Link DAP-2310 Hardware A Firmware 1.16RC028 allows remote attackers to execute arbitrary code via a stack-based buffer overflow in the ATP binary that handles PHP HTTP GET requests for the Apache HTTP Server (httpd). NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2024-40892
A weak credential vulnerability exists in Firewalla Box Software versions before 1.979. This vulnerability allows a physically close attacker to use the license UUID for authentication and provision SSH credentials over the Bluetooth Low-Energy (BTLE) interface. Once an attacker gains access to the LAN, they could log into the SSH interface using the provisioned credentials. The license UUID can be acquired through plain-text Bluetooth sniffing, reading the QR code on the bottom of the device, or brute-forcing the UUID (though this is less likely).
-
CVE-2024-20449
A vulnerability in Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, remote attacker with low privileges to execute arbitrary code on an affected device. This vulnerability is due to improper path validation. An attacker could exploit this vulnerability by using the Secure Copy Protocol (SCP) to upload malicious code to an affected device using path traversal techniques. A successful exploit could allow the attacker to execute arbitrary code in a specific container with the privileges of root.
-
CVE-2024-40763
Heap-based buffer overflow vulnerability in the SonicWall SMA100 SSLVPN due to the use of strcpy. This allows remote authenticated attackers to cause Heap-based buffer overflow and potentially lead to code execution.
-
CVE-2024-10119
The wireless router WRTM326 from SECOM does not properly validate a specific parameter. An unauthenticated remote attacker could execute arbitrary system commands by sending crafted requests.
-
CVE-2024-12728
A weak credentials vulnerability potentially allows privileged system access via SSH to Sophos Firewall older than version 20.0 MR3 (20.0.3).
-
CVE-2024-45880
A command injection vulnerability exists in Motorola CX2L router v1.0.2 and below. The vulnerability is present in the SetStationSettings function. The system directly invokes the system function to execute commands for setting parameters such as MAC address without proper input filtering. This allows malicious users to inject and execute arbitrary commands.
-
CVE-2024-34195
TOTOLINK AC1200 Wireless Router A3002R Firmware V1.1.1-B20200824 is vulnerable to Buffer Overflow. In the boa server program's CGI handling function formWlEncrypt, there is a lack of length restriction on the wlan_ssid field. This oversight leads to potential buffer overflow under specific circumstances. For instance, by invoking the formWlanRedirect function with specific parameters to alter wlan_idx's value and subsequently invoking the formWlEncrypt function, an attacker can trigger buffer overflow, enabling arbitrary command execution or denial of service attacks.
-
CVE-2024-43689
Stack-based buffer overflow vulnerability exists in ELECOM wireless access points. By processing a specially crafted HTTP request, arbitrary code may be executed.
-
CVE-2024-8751
A vulnerability allows a remote unauthenticated attacker to modify the prod uct’s IP address over the Sopas ET interface. This can lead to a Denial of Service attack.
-
CVE-2024-20424
A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software, could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to insufficient input validation of certain HTTP requests. An attacker could exploit this vulnerability by authenticating to the web-based management interface of an affected device and then sending a crafted HTTP request to the device. A successful exploit could allow the attacker to execute arbitrary commands with root permissions on the underlying operating system of the Cisco FMC device or to execute commands on managed Cisco Firepower Threat Defense (FTD) devices. To exploit this vulnerability, the attacker would need valid credentials for a user account with at least the role of Security Analyst (Read Only).
-
CVE-2023-37057
An issue in JLINK Unionman Technology Co. Ltd Jlink AX1800 v.1.0 allows a remote attacker to execute arbitrary code via the router's authentication mechanism.
-
CVE-2020-27124
A vulnerability in the SSL/TLS handler of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause the affected device to reload unexpectedly, leading to a denial of service (DoS) condition. The vulnerability is due to improper error handling on established SSL/TLS connections. An attacker could exploit this vulnerability by establishing an SSL/TLS connection with the affected device and then sending a malicious SSL/TLS message within that connection. A successful exploit could allow the attacker to cause the device to reload.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-48271
D-Link DSL6740C v6.TR069.20211230 was discovered to use insecure default credentials for Administrator access, possibly allowing attackers to bypass authentication and escalate privileges on the device via a bruteforce attack.
-
CVE-2024-23309
The LevelOne WBR-6012 router with firmware R0.40e6 has an authentication bypass vulnerability in its web application due to reliance on client IP addresses for authentication. Attackers could spoof an IP address to gain unauthorized access without needing a session token.
-
CVE-2024-41136
An authenticated command injection vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateways Command Line Interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.
-
CVE-2022-20814
A vulnerability in the certificate validation of Cisco Expressway-C and Cisco TelePresence VCS could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data. The vulnerability is due to a lack of validation of the SSL server certificate that an affected device receives when it establishes a connection to a Cisco Unified Communications Manager device. An attacker could exploit this vulnerability by using a man-in-the-middle technique to intercept the traffic between the devices, and then using a self-signed certificate to impersonate the endpoint. A successful exploit could allow the attacker to view the intercepted traffic in clear text or alter the contents of the traffic. Note: Cisco Expressway-E is not affected by this vulnerability.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2023-20154
A vulnerability in the external authentication mechanism of Cisco Modeling Labs could allow an unauthenticated, remote attacker to access the web interface with administrative privileges. This vulnerability is due to the improper handling of certain messages that are returned by the associated external authentication server. An attacker could exploit this vulnerability by logging in to the web interface of an affected server. Under certain conditions, the authentication mechanism would be bypassed and the attacker would be logged in as an administrator. A successful exploit could allow the attacker to obtain administrative privileges on the web interface of an affected server, including the ability to access and modify every simulation and all user-created data. To exploit this vulnerability, the attacker would need valid user credentials that are stored on the associated external authentication server. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.
-
CVE-2024-39567
A vulnerability has been identified in SINEMA Remote Connect Client (All versions < V3.2 HF1). The system service of affected applications is vulnerable to command injection due to missing server side input sanitation when loading VPN configurations. This could allow an authenticated local attacker to execute arbitrary code with system privileges.
-
CVE-2024-50557
A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices do not properly validate input in configuration fields of the iperf functionality. This could allow an unauthenticated remote attacker to execute arbitrary code on the device.
-
CVE-2024-10283
A vulnerability, which was classified as critical, has been found in Tenda RX9 and RX9 Pro 22.03.02.20. Affected by this issue is the function sub_4337EC of the file /goform/SetNetControlList. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2023-28078
Dell OS10 Networking Switches running 10.5.2.x and above contain a vulnerability with zeroMQ when VLT is configured. A remote unauthenticated attacker could potentially exploit this vulnerability leading to information disclosure and a possible Denial of Service when a huge number of requests are sent to the switch. This is a high severity vulnerability as it allows an attacker to view sensitive data. Dell recommends customers to upgrade at the earliest opportunity.
-
CVE-2020-12820
Under non-default configuration, a stack-based buffer overflow in FortiOS version 6.0.10 and below, version 5.6.12 and below may allow a remote attacker authenticated to the SSL VPN to crash the FortiClient NAC daemon (fcnacd) and potentially execute arbitrary code via requesting a large FortiClient file name. We are not aware of proof of concept code successfully achieving the latter.
-
CVE-2024-12988
A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2024-44589
Stack overflow vulnerability in the Login function in the HNAP service in D-Link DCS-960L with firmware 1.09 allows attackers to execute of arbitrary code.
-
CVE-2024-5785
Command injection vulnerability in Comtrend router WLD71-T1_v2.0.201820, affecting the GRG-4280us version. This vulnerability could allow an authenticated user to execute commands inside the router by making a POST request to the URL “/boaform/admin/formUserTracert”.
-
CVE-2021-1483
A vulnerability in the web UI of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to gain read and write access to information that is stored on an affected system. This vulnerability is due to improper handling of XML External Entity (XXE) entries when the affected software parses certain XML files. An attacker could exploit this vulnerability by persuading a user to import a crafted XML file with malicious entries. A successful exploit could allow the attacker to read and write files within the affected application.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-27683
D-Link Go-RT-AC750 GORTAC750_A1_FW_v101b03 contains a stack-based buffer overflow via the function hnap_main. An attacker can send a POST request to trigger the vulnerablilify.
-
CVE-2024-21827
A leftover debug code vulnerability exists in the cli_server debug functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.4.1 Build 20240117 Rel.57421. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.
-
CVE-2024-25139
In TP-Link Omada er605 1.0.1 through (v2.6) 2.2.3, a cloud-brd binary is susceptible to an integer overflow that leads to a heap-based buffer overflow. After heap shaping, an attacker can achieve code execution in the context of the cloud-brd binary that runs at the root level. This is fixed in ER605(UN)_v2_2.2.4 Build 020240119.
-
CVE-2024-38536
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. A memory allocation failure due to `http.memcap` being reached leads to a NULL-ptr reference leading to a crash. Upgrade to 7.0.6.
-
CVE-2024-10351
A vulnerability was found in Tenda RX9 Pro 22.03.02.20. It has been rated as critical. This issue affects the function sub_424CE0 of the file /goform/setMacFilterCfg of the component POST Request Handler. The manipulation of the argument deviceList leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-38534
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.
-
CVE-2024-22144
Improper Control of Generation of Code ('Code Injection') vulnerability in Eli Scheetz Anti-Malware Security and Brute-Force Firewall gotmls allows Code Injection.This issue affects Anti-Malware Security and Brute-Force Firewall: from n/a through 4.21.96.
-
CVE-2024-20436
A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.
-
CVE-2024-43783
The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Instances of the Apollo Router running versions >=1.21.0 and < 1.52.1 are impacted by a denial of service vulnerability if _all_ of the following are true: 1. The Apollo Router has been configured to support [External Coprocessing](https://www.apollographql.com/docs/router/customizations/coprocessor). 2. The Apollo Router has been configured to send request bodies to coprocessors. This is a non-default configuration and must be configured intentionally by administrators. Instances of the Apollo Router running versions >=1.7.0 and <1.52.1 are impacted by a denial-of-service vulnerability if all of the following are true: 1. Router has been configured to use a custom-developed Native Rust Plugin. 2. The plugin accesses Request.router_request in the RouterService layer. 3. You are accumulating the body from Request.router_request into memory. If using an impacted configuration, the Router will load entire HTTP request bodies into memory without respect to other HTTP request size-limiting configurations like limits.http_max_request_bytes. This can cause the Router to be out-of-memory (OOM) terminated if a sufficiently large request is sent to the Router. By default, the Router sets limits.http_max_request_bytes to 2 MB. If you have an impacted configuration as defined above, please upgrade to at least Apollo Router 1.52.1. If you cannot upgrade, you can mitigate the denial-of-service opportunity impacting External Coprocessors by setting the coprocessor.router.request.body configuration option to false. Please note that changing this configuration option will change the information sent to any coprocessors you have configured and may impact functionality implemented by those coprocessors. If you have developed a Native Rust Plugin and cannot upgrade, you can update your plugin to either not accumulate the request body or enforce a maximum body size limit. You can also mitigate this issue by limiting HTTP body payload sizes prior to the Router (e.g., in a proxy or web application firewall appliance).
-
CVE-2024-20416
A vulnerability in the upload module of Cisco RV340 and RV345 Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to insufficient boundary checks when processing specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the device.
-
CVE-2023-31634
In TeslaMate before 1.27.2, there is unauthorized access to port 4000 for remote viewing and operation of user data. After accessing the IP address for the TeslaMate instance, an attacker can switch the port to 3000 to enter Grafana for remote operations. At that time, the default username and password can be used to enter the Grafana management console without logging in, a related issue to CVE-2022-23126.
-
CVE-2024-39607
OS command injection vulnerability exists in ELECOM wireless LAN routers. A specially crafted request may be sent to the affected product by a logged-in user with an administrative privilege to execute an arbitrary OS command.
-
CVE-2023-52040
An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_41284C function.
-
CVE-2024-32117
An improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability [CWE-22] in Fortinet FortiManager version 7.4.0 through 7.4.2 and below 7.2.5, FortiAnalyzer version 7.4.0 through 7.4.2 and below 7.2.5 & FortiAnalyzer-BigData version 7.4.0 and below 7.2.7 allows a privileged attacker to read arbitrary files from the underlying system via crafted HTTP or HTTPs requests.
-
CVE-2024-41610
D-Link DIR-820LW REVB FIRMWARE PATCH 2.03.B01_TC contains hardcoded credentials in the Telnet service, enabling attackers to log in remotely to the Telnet service and perform arbitrary commands.
-
CVE-2024-51021
Netgear XR300 v1.0.3.78, R7000P v1.3.3.154, and R6400 v2 1.0.4.128 was discovered to contain a command injection vulnerability via the wan_gateway parameter at genie_fix2.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2023-40720
An authorization bypass through user-controlled key vulnerability [CWE-639] in FortiVoiceEntreprise version 7.0.0 through 7.0.1 and before 6.4.8 allows an authenticated attacker to read the SIP configuration of other users via crafted HTTP or HTTPS requests.
-
CVE-2020-3548
A vulnerability in the Transport Layer Security (TLS) protocol implementation of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to inefficient processing of incoming TLS traffic. An attacker could exploit this vulnerability by sending a series of crafted TLS packets to an affected device. A successful exploit could allow the attacker to trigger a prolonged state of high CPU utilization. The affected device would still be operative, but response time and overall performance may be degraded.There are no workarounds that address this vulnerability.
-
CVE-2020-26062
A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application. The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability.
CVE records published in 2024 (ids starting CVE-2024-), sorted by how likely they are to be exploited.