CVEs of 2024.
Every CVE published in 2024 that we hold, ranked by exploit odds.
-
CVE-2024-2973
An Authentication Bypass Using an Alternate Path or Channel vulnerability in Juniper Networks Session Smart Router or conductor running with a redundant peer allows a network based attacker to bypass authentication and take full control of the device. Only routers or conductors that are running in high-availability redundant configurations are affected by this vulnerability. No other Juniper Networks products or platforms are affected by this issue. This issue affects: Session Smart Router: * All versions before 5.6.15, * from 6.0 before 6.1.9-lts, * from 6.2 before 6.2.5-sts. Session Smart Conductor: * All versions before 5.6.15, * from 6.0 before 6.1.9-lts, * from 6.2 before 6.2.5-sts. WAN Assurance Router: * 6.0 versions before 6.1.9-lts, * 6.2 versions before 6.2.5-sts.
-
CVE-2023-51987
D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.
-
CVE-2024-11056
A vulnerability, which was classified as critical, was found in Tenda AC10 16.03.10.13. Affected is the function FUN_0046AC38 of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-42747
In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setWanIeCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.
-
CVE-2021-1232
A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to read arbitrary files on the underlying filesystem of an affected system. This vulnerability is due to insufficient access control for sensitive information that is written to an affected system. An attacker could exploit this vulnerability by accessing sensitive information that they are not authorized to access on an affected system. A successful exploit could allow the attacker to gain access to devices and other network management systems that they should not have access to.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-22852
D-Link Go-RT-AC750 GORTAC750_A1_FW_v101b03 contains a stack-based buffer overflow via the function genacgi_main. This vulnerability allows attackers to enable telnet service via a specially crafted payload.
-
CVE-2021-1470
A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability is due to improper input validation of SQL queries to an affected system. An attacker could exploit this vulnerability by authenticating to the application and sending malicious SQL queries to an affected system. A successful exploit could allow the attacker to modify values on or return values from the vManage database or the underlying operating system.Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
-
CVE-2024-5974
A buffer overflow in WatchGuard Fireware OS could may allow an authenticated remote attacker with privileged management access to execute arbitrary code with system privileges on the firewall. This issue affects Fireware OS: from 11.9.6 through 12.10.3.
-
CVE-2023-47534
A improper neutralization of formula elements in a csv file vulnerability in Fortinet FortiClientEMS 7.2.0 through 7.2.2, FortiClientEMS 7.0.0 through 7.0.10, FortiClientEMS 6.4 all versions, FortiClientEMS 06.02 all versions, FortiClientEMS 6.2 all versions, FortiClientEMS 06.00 all versions, FortiClientEMS 6.0 all versions allows attacker to execute unauthorized code or commands via specially crafted packets.
-
CVE-2024-8079
A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228. It has been rated as critical. This issue affects the function exportOvpn. The manipulation leads to buffer overflow. The attack may be initiated remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-35518
Netgear EX6120 v1.0.0.68 is vulnerable to Command Injection in genie_fix2.cgi via the wan_dns1_pri parameter.
-
CVE-2024-33365
Buffer Overflow vulnerability in Tenda AC10 v4 US_AC10V4.0si_V16.03.10.20_cn allows a remote attacker to execute arbitrary code via the Virtual_Data_Check function in the bin/httpd component.
-
CVE-2024-35519
Netgear EX6120 v1.0.0.68, Netgear EX6100 v1.0.2.28, and Netgear EX3700 v1.0.0.96 are vulnerable to command injection in operating_mode.cgi via the ap_mode parameter.
-
CVE-2024-8078
A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228. It has been declared as critical. This vulnerability affects the function setTracerouteCfg. The manipulation leads to buffer overflow. The attack can be initiated remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-23111
An improper neutralization of input during web page Generation ('Cross-site Scripting') vulnerability [CWE-79] in FortiOS version 7.4.3 and below, 7.2 all versions, 7.0 all versions and FortiProxy version 7.4.2 and below, 7.2 all versions, 7.0 all versions reboot page may allow a remote privileged attacker with super-admin access to execute JavaScript code via crafted HTTP GET requests.
-
CVE-2024-45318
A vulnerability in the SonicWall SMA100 SSLVPN web management interface allows remote attackers to cause Stack-based buffer overflow and potentially lead to code execution.
-
CVE-2024-33773
A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via formWlanGuestSetup allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."
-
CVE-2024-33774
A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via formWlanSetup_Wizard allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."
-
CVE-2024-45697
Certain models of D-Link wireless routers have a hidden functionality where the telnet service is enabled when the WAN port is plugged in. Unauthorized remote attackers can log in and execute OS commands using hard-coded credentials.
-
CVE-2024-39569
A vulnerability has been identified in SINEMA Remote Connect Client (All versions < V3.2 HF1). The system service of affected applications is vulnerable to command injection due to missing server side input sanitation when loading VPN configurations. This could allow an administrative remote attacker running a corresponding SINEMA Remote Connect Server to execute arbitrary code with system privileges on the client system.
-
CVE-2024-29292
Multiple OS Command Injection vulnerabilities affecting Kasda LinkSmart Router KW6512 <= v1.3 enable an authenticated remote attacker to execute arbitrary OS commands via various cgi parameters.
-
CVE-2024-2257
This vulnerability exists in Digisol Router (DG-GR1321: Hardware version 3.7L; Firmware version : v3.2.02) due to improper implementation of password policies. An attacker with physical access could exploit this by creating password that do not adhere to the defined security standards/policy on the vulnerable system. Successful exploitation of this vulnerability could allow the attacker to expose the router to potential security threats.
-
CVE-2024-12830
Arista NG Firewall custom_handler Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Arista NG Firewall. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the custom_handler method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of the www-data user. Was ZDI-CAN-24019.
-
CVE-2024-3912
Certain models of ASUS routers have an arbitrary firmware upload vulnerability. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary system commands on the device.
-
CVE-2024-53008
Inconsistent interpretation of HTTP requests ('HTTP Request/Response Smuggling') issue exists in HAProxy. If this vulnerability is exploited, a remote attacker may access a path that is restricted by ACL (Access Control List) set on the product. As a result, the attacker may obtain sensitive information.
-
CVE-2024-31488
An improper neutralization of inputs during web page generation vulnerability [CWE-79] in FortiNAC version 9.4.0 through 9.4.4, 9.2.0 through 9.2.8, 9.1.0 through 9.1.10, 8.8.0 through 8.8.11, 8.7.0 through 8.7.6, 7.2.0 through 7.2.3 may allow a remote authenticated attacker to perform stored and reflected cross site scripting (XSS) attack via crafted HTTP requests.
-
CVE-2024-41183
Trend Micro VPN, version 5.8.1012 and below is vulnerable to an arbitrary file overwrite under specific conditions that can lead to elevation of privileges.
-
CVE-2022-20648
A vulnerability in a debug function for Cisco RCM for Cisco StarOS Software could allow an unauthenticated, remote attacker to perform debug actions that could result in the disclosure of confidential information that should be restricted. This vulnerability exists because of a debug service that incorrectly listens to and accepts incoming connections. An attacker could exploit this vulnerability by connecting to the debug port and executing debug commands. A successful exploit could allow the attacker to view sensitive debugging information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-33771
A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via goform/formWPS, allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."
-
CVE-2023-46685
A hard-coded password vulnerability exists in the telnetd functionality of LevelOne WBR-6013 RER4_A_v3411b_2T2R_LEV_09_170623. A set of specially crafted network packets can lead to arbitrary command execution.
-
CVE-2024-52022
Netgear R8500 v1.0.2.160, XR300 v1.0.3.78, R7000P v1.3.3.154, and R6400 v2 1.0.4.128 were discovered to contain a command injection vulnerability in the component wlg_adv.cgi via the apmode_gateway parameter. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2024-52020
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at wiz_fix2.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2024-52021
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at bsw_fix.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2022-20846
A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the Cisco Discovery Protocol process to reload on an affected device. This vulnerability is due to a heap buffer overflow in certain Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow, which could cause the Cisco Discovery Protocol process to reload on the device. The bytes that can be written in the buffer overflow are restricted, which limits remote code execution.Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see .
-
CVE-2024-47180
Shields.io is a service for concise, consistent, and legible badges in SVG and raster format. Shields.io and users self-hosting their own instance of shields using version < `server-2024-09-25` are vulnerable to a remote execution vulnerability via the JSONPath library used by the Dynamic JSON/Toml/Yaml badges. This vulnerability would allow any user with access to make a request to a URL on the instance to the ability to execute code by crafting a malicious JSONPath expression. All users who self-host an instance are vulnerable. This problem was fixed in server-2024-09-25. Those who follow the tagged releases should update to `server-2024-09-25` or later. Those who follow the rolling tag on DockerHub, `docker pull shieldsio/shields:next` to update to the latest version. As a workaround, blocking access to the endpoints `/badge/dynamic/json`, `/badge/dynamic/toml`, and `/badge/dynamic/yaml` (e.g: via a firewall or reverse proxy in front of your instance) would prevent the exploitable endpoints from being accessed.
-
CVE-2024-10281
A vulnerability classified as critical has been found in Tenda RX9 and RX9 Pro 22.03.02.10/22.03.02.20. Affected is the function sub_42EEE0 of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-43414
Apollo Federation is an architecture for declaratively composing APIs into a unified graph. Each team can own their slice of the graph independently, empowering them to deliver autonomously and incrementally. Instances of @apollo/query-planner >=2.0.0 and <2.8.5 are impacted by a denial-of-service vulnerability. @apollo/gateway versions >=2.0.0 and < 2.8.5 and Apollo Router <1.52.1 are also impacted through their use of @apollo/query-panner. If @apollo/query-planner is asked to plan a sufficiently complex query, it may loop infinitely and never complete. This results in unbounded memory consumption and either a crash or out-of-memory (OOM) termination. This issue can be triggered if you have at least one non-@key field that can be resolved by multiple subgraphs. To identify these shared fields, the schema for each subgraph must be reviewed. The mechanism to identify shared fields varies based on the version of Federation your subgraphs are using. You can check if your subgraphs are using Federation 1 or Federation 2 by reviewing their schemas. Federation 2 subgraph schemas will contain a @link directive referencing the version of Federation being used while Federation 1 subgraphs will not. For example, in a Federation 2 subgraph, you will find a line like @link(url: "https://specs.apollo.dev/federation/v2.0"). If a similar @link directive is not present in your subgraph schema, it is using Federation 1. Note that a supergraph can contain a mix of Federation 1 and Federation 2 subgraphs. This issue results from the Apollo query planner attempting to use a Number exceeding Javascript’s Number.MAX_VALUE in some cases. In Javascript, Number.MAX_VALUE is (2^1024 - 2^971). When the query planner receives an inbound graphql request, it breaks the query into pieces and for each piece, generates a list of potential execution steps to solve the piece. These candidates represent the steps that the query planner will take to satisfy the pieces of the larger query. As part of normal operations, the query planner requires and calculates the number of possible query plans for the total query. That is, it needs the product of the number of query plan candidates for each piece of the query. Under normal circumstances, after generating all query plan candidates and calculating the number of all permutations, the query planner moves on to stack rank candidates and prune less-than-optimal options. In particularly complex queries, especially those where fields can be solved through multiple subgraphs, this can cause the number of all query plan permutations to balloon. In worst-case scenarios, this can end up being a number larger than Number.MAX_VALUE. In Javascript, if Number.MAX_VALUE is exceeded, Javascript represents the value as “infinity”. If the count of candidates is evaluated as infinity, the component of the query planner responsible for pruning less-than-optimal query plans does not actually prune candidates, causing the query planner to evaluate many orders of magnitude more query plan candidates than necessary. This issue has been addressed in @apollo/query-planner v2.8.5, @apollo/gateway v2.8.5, and Apollo Router v1.52.1. Users are advised to upgrade. This issue can be avoided by ensuring there are no fields resolvable from multiple subgraphs. If all subgraphs are using Federation 2, you can confirm that you are not impacted by ensuring that none of your subgraph schemas use the @shareable directive. If you are using Federation 1 subgraphs, you will need to validate that there are no fields resolvable by multiple subgraphs.
-
CVE-2024-9844
Insufficient server-side controls in Secure Application Manager of Ivanti Connect Secure before version 22.7R2.4 allows a remote authenticated attacker to bypass restrictions.
-
CVE-2024-51188
TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices contain a Store Cross-site scripting (XSS) vulnerability via the vsRule_VirtualServerName_1.1.10.0.0 parameter on the /virtual_server.htm page.
-
CVE-2024-51189
TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices contain a Store Cross-site scripting (XSS) vulnerability via the macList_Name_1.1.1.0.0 parameter on the /filters.htm page.
-
CVE-2024-51190
TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices contain a Store Cross-site scripting (XSS) vulnerability via the ptRule_ApplicationName_1.1.6.0.0 parameter on the /special_ap.htm page.
-
CVE-2024-51187
TRENDnet TEW-651BR 2.04B1, TEW-652BRP 3.04b01, and TEW-652BRU 1.00b12 devices contain a Store Cross-site scripting (XSS) vulnerability via the firewallRule_Name_1.1.1.0.0 parameter on the /firewall_setting.htm page.
-
CVE-2024-22916
In D-LINK Go-RT-AC750 v101b03, the sprintf function in the sub_40E700 function within the cgibin is susceptible to stack overflow.
-
CVE-2024-20467
A vulnerability in the implementation of the IPv4 fragmentation reassembly code in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper management of resources during fragment reassembly. An attacker could exploit this vulnerability by sending specific sizes of fragmented packets to an affected device or through a Virtual Fragmentation Reassembly (VFR)-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability affects Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers if they are running Cisco IOS XE Software Release 17.12.1 or 17.12.1a.
-
CVE-2024-9783
A vulnerability was found in D-Link DIR-619L B1 2.06. It has been rated as critical. This issue affects the function formLogDnsquery of the file /goform/formLogDnsquery. The manipulation of the argument curTime leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-9784
A vulnerability classified as critical has been found in D-Link DIR-619L B1 2.06. Affected is the function formResetStatistic of the file /goform/formResetStatistic. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-9284
A vulnerability was found in TP-LINK TL-WR841ND up to 20240920. It has been rated as critical. Affected by this issue is some unknown functionality of the file /userRpm/popupSiteSurveyRpm.htm. The manipulation of the argument ssid leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-33792
netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the tracert page.
-
CVE-2024-51008
Netgear XR300 v1.0.3.78 was discovered to contain a command injection vulnerability in the system_name parameter at wiz_dyn.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
-
CVE-2024-51009
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at ether.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
CVE records published in 2024 (ids starting CVE-2024-), sorted by how likely they are to be exploited.