CVEs of 2024.
Every CVE published in 2024 that we hold, ranked by exploit odds.
-
CVE-2021-1424
A vulnerability in the ipsecmgr process of Cisco ASR 5000 Series Software (StarOS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to insufficient validation of incoming Internet Key Exchange Version 2 (IKEv2) packets. An attacker could exploit this vulnerability by sending specifically malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause the ipsecmgr process to restart, which would disrupt ongoing IKE negotiations and result in a temporary DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-42442
APTIOV contains a vulnerability in the BIOS where a user or attacker may cause an improper restriction of operations within the bounds of a memory buffer over the network. A successful exploitation of this vulnerability may lead to code execution outside of the intended System Management Mode.
-
CVE-2024-5242
TP-Link Omada ER605 Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DDNS error codes. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22522.
-
CVE-2024-45746
An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE).
-
CVE-2024-43847
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid memory access while processing fragmented packets The monitor ring and the reo reinject ring share the same ring mask index. When the driver receives an interrupt for the reo reinject ring, the monitor ring is also processed, leading to invalid memory access. Since monitor support is not yet enabled in ath12k, the ring mask for the monitor ring should be removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
-
CVE-2024-0397
A defect was discovered in the Python “ssl” module where there is a memory race condition with the ssl.SSLContext methods “cert_store_stats()” and “get_ca_certs()”. The race condition can be triggered if the methods are called at the same time as certificates are loaded into the SSLContext, such as during the TLS handshake with a certificate directory configured. This issue is fixed in CPython 3.10.14, 3.11.9, 3.12.3, and 3.13.0a5.
-
CVE-2021-47347
In the Linux kernel, the following vulnerability has been resolved: wl1251: Fix possible buffer overflow in wl1251_cmd_scan Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size.
-
CVE-2024-12147
A vulnerability was found in Netgear R6900 1.0.1.26_1.0.20. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file upgrade_check.cgi of the component HTTP Header Handler. The manipulation of the argument Content-Length leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2024-9088
A vulnerability has been found in SourceCodester Telecom Billing Management System 1.0 and classified as critical. This vulnerability affects the function login. The manipulation of the argument uname leads to buffer overflow. The exploit has been disclosed to the public and may be used.
-
CVE-2024-42815
In the TP-Link RE365 V1_180213, there is a buffer overflow vulnerability due to the lack of length verification for the USER_AGENT field in /usr/bin/httpd. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
-
CVE-2024-5696
By manipulating the text in an `<input>` tag, an attacker could have caused corrupt memory leading to a potentially exploitable crash. This vulnerability affects Firefox < 127, Firefox ESR < 115.12, and Thunderbird < 115.12.
-
CVE-2024-32301
Tenda AC7V1.0 v15.03.06.44 firmware has a stack overflow vulnerability via the PPW parameter in the fromWizardHandle function.
-
CVE-2024-30635
Tenda F1202 v1.2.0.20(408) has a stack overflow vulnerability located in the funcpara1 parameter in the formSetCfm function.
-
CVE-2024-30628
Tenda FH1205 v2.0.0.7(775) has a stack overflow vulnerability in the page parameter from fromAddressNat function.
-
CVE-2024-30630
Tenda FH1205 v2.0.0.7(775) has a stack overflow vulnerability in the time parameter from saveParentControlInfo function.
-
CVE-2024-30622
Tenda FH1205 v2.0.0.7(775) has a stack overflow vulnerability in the mitInterface parameter from fromAddressNat function.
-
CVE-2024-30587
Tenda FH1202 v1.2.0.14(408) has a stack overflow vulnerability in the urls parameter of the saveParentControlInfo function.
-
CVE-2024-30593
Tenda FH1202 v1.2.0.14(408) has a stack overflow vulnerability located in the deviceName parameter of the formSetDeviceName function.
-
CVE-2024-30595
Tenda FH1202 v1.2.0.14(408) has a stack overflow vulnerability in the deviceId parameter of the addWifiMacFilter function.
-
CVE-2024-44282
An out-of-bounds read was addressed with improved input validation. This issue is fixed in iOS 17.7.1 and iPadOS 17.7.1, iOS 18.1 and iPadOS 18.1, macOS Sequoia 15.1, macOS Sonoma 14.7.1, macOS Ventura 13.7.1, tvOS 18.1, visionOS 2.1, watchOS 11.1. Parsing a file may lead to disclosure of user information.
-
CVE-2024-10280
A vulnerability was found in Tenda AC6, AC7, AC8, AC9, AC10, AC10U, AC15, AC18, AC500 and AC1206 up to 20241022. It has been rated as problematic. This issue affects the function websReadEvent of the file /goform/GetIPTV. The manipulation of the argument Content-Length leads to null pointer dereference. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2024-52546
An unauthenticated attacker can perform a null pointer dereference in the DHIP Service (UDP port 37810). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.
-
CVE-2024-43465
Microsoft Excel Elevation of Privilege Vulnerability
-
CVE-2024-24188
Jsish v3.5.0 was discovered to contain a heap-buffer-overflow in ./src/jsiUtils.c.
-
CVE-2024-43537
Windows Mobile Broadband Driver Denial of Service Vulnerability
-
CVE-2023-52738
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini Currently amdgpu calls drm_sched_fini() from the fence driver sw fini routine - such function is expected to be called only after the respective init function - drm_sched_init() - was executed successfully. Happens that we faced a driver probe failure in the Steam Deck recently, and the function drm_sched_fini() was called even without its counter-part had been previously called, causing the following oops: amdgpu: probe of 0000:04:00.0 failed with error -110 BUG: kernel NULL pointer dereference, address: 0000000000000090 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338 Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022 RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched] [...] Call Trace: <TASK> amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu] amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] devm_drm_dev_init_release+0x49/0x70 [...] To prevent that, check if the drm_sched was properly initialized for a given ring before calling its fini counter-part. Notice ideally we'd use sched.ready for that; such field is set as the latest thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such field - in the above oops for example, it was a GFX ring causing the crash, and the sched.ready field was set to true in the ring init routine, regardless of the state of the DRM scheduler. Hence, we ended-up using sched.ops as per Christian's suggestion [0], and also removed the no_scheduler check [1]. [0] https://lore.kernel.org/amd-gfx/[email protected]/ [1] https://lore.kernel.org/amd-gfx/[email protected]/
-
CVE-2024-8076
A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this issue is the function setDiagnosisCfg. The manipulation leads to buffer overflow. The attack may be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-35878
In the Linux kernel, the following vulnerability has been resolved: of: module: prevent NULL pointer dereference in vsnprintf() In of_modalias(), we can get passed the str and len parameters which would cause a kernel oops in vsnprintf() since it only allows passing a NULL ptr when the length is also 0. Also, we need to filter out the negative values of the len parameter as these will result in a really huge buffer since snprintf() takes size_t parameter while ours is ssize_t... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool.
-
CVE-2024-26811
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate payload size in ipc response If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc response to ksmbd kernel server. ksmbd should validate payload size of ipc response from ksmbd.mountd to avoid memory overrun or slab-out-of-bounds. This patch validate 3 ipc response that has payload.
-
CVE-2024-34207
TOTOLINK CP450 v4.1.0cu.747_B20191224 was discovered to contain a stack buffer overflow vulnerability in the setStaticDhcpConfig function.
-
CVE-2020-12819
A heap-based buffer overflow vulnerability in the processing of Link Control Protocol messages in FortiGate versions 5.6.12, 6.0.10, 6.2.4 and 6.4.1 and earlier may allow a remote attacker with valid SSL VPN credentials to crash the SSL VPN daemon by sending a large LCP packet, when tunnel mode is enabled. Arbitrary code execution may be theoretically possible, albeit practically very difficult to achieve in this context
-
CVE-2024-30016
Windows Cryptographic Services Information Disclosure Vulnerability
-
CVE-2022-48790
In the Linux kernel, the following vulnerability has been resolved: nvme: fix a possible use-after-free in controller reset during load Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER.
-
CVE-2024-30064
Windows Kernel Elevation of Privilege Vulnerability
-
CVE-2024-38056
Microsoft Windows Codecs Library Information Disclosure Vulnerability
-
CVE-2024-36843
libmodbus v3.1.6 was discovered to contain a heap overflow via the modbus_mapping_free() function.
-
CVE-2021-47013
In the Linux kernel, the following vulnerability has been resolved: net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..). If some error happens in emac_tx_fill_tpd(), the skb will be freed via dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd(). But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len). As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len, thus my patch assigns skb->len to 'len' before the possible free and use 'len' instead of skb->len later.
-
CVE-2024-49996
In the Linux kernel, the following vulnerability has been resolved: cifs: Fix buffer overflow when parsing NFS reparse points ReparseDataLength is sum of the InodeType size and DataBuffer size. So to get DataBuffer size it is needed to subtract InodeType's size from ReparseDataLength. Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer at position after the end of the buffer because it does not subtract InodeType size from the length. Fix this problem and correctly subtract variable len. Member InodeType is present only when reparse buffer is large enough. Check for ReparseDataLength before accessing InodeType to prevent another invalid memory access. Major and minor rdev values are present also only when reparse buffer is large enough. Check for reparse buffer size before calling reparse_mkdev().
-
CVE-2024-23923
Alpine Halo9 prh_l2_sar_data_ind Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine Halo9 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prh_l2_sar_data_ind function. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22945
-
CVE-2022-48623
The Cpanel::JSON::XS package before 4.33 for Perl performs out-of-bounds accesses in a way that allows attackers to obtain sensitive information or cause a denial of service.
-
CVE-2024-25029
IBM Personal Communications 14.0.6 through 15.0.1 includes a Windows service that is vulnerable to remote code execution (RCE) and local privilege escalation (LPE). The vulnerability allows any unprivileged user with network access to a target computer to run commands with full privileges in the context of NT AUTHORITY\SYSTEM. This allows for a low privileged attacker to move laterally to affected systems and to escalate their privileges. IBM X-Force ID: 281619.
-
CVE-2024-6874
libcurl's URL API function [curl_url_get()](https://curl.se/libcurl/c/curl_url_get.html) offers punycode conversions, to and from IDN. Asking to convert a name that is exactly 256 bytes, libcurl ends up reading outside of a stack based buffer when built to use the *macidn* IDN backend. The conversion function then fills up the provided buffer exactly - but does not null terminate the string. This flaw can lead to stack contents accidently getting returned as part of the converted string.
-
CVE-2024-26010
A stack-based buffer overflow vulnerability in Fortinet FortiOS 7.4.0 through 7.4.3, FortiOS 7.2.0 through 7.2.7, FortiOS 7.0.0 through 7.0.14, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.4.0 through 7.4.3, FortiProxy 7.2.0 through 7.2.9, FortiProxy 7.0.0 through 7.0.16, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions, FortiSwitchManager 7.2.0 through 7.2.3, FortiSwitchManager 7.0.1 through 7.0.3 allows attacker to execute unauthorized code or commands via specially crafted packets.
-
CVE-2024-23709
In multiple locations, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.
-
CVE-2024-31030
An issue in coap_msg.c in Keith Cullen's FreeCoAP v.0.7 allows remote attackers to cause a Denial of Service or potentially disclose information via a specially crafted packet.
-
CVE-2024-24946
A heap-based buffer overflow vulnerability exists in the Programming Software Connection CurrDir functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to denial of service. An attacker can send an unauthenticated packet to trigger these vulnerability.This CVE tracks the heap corruption that occurs at offset `0xb686c` of version 1.2.10.9 of the P3-550E firmware, which occurs when a call to `memset` relies on an attacker-controlled length value and corrupts any trailing heap allocations.
-
CVE-2024-5157
Use after free in Scheduling in Google Chrome prior to 125.0.6422.76 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)
-
CVE-2024-22080
An issue was discovered in Elspec G5 digital fault recorder versions 1.1.4.15 and before. Unauthenticated memory corruption can occur during XML body parsing.
-
CVE-2024-22081
An issue was discovered in Elspec G5 digital fault recorder versions 1.1.4.15 and before. Unauthenticated memory corruption can occur in the HTTP header parsing mechanism.
-
CVE-2024-20446
A vulnerability in the DHCPv6 relay agent of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in a DHCPv6 RELAY-REPLY message. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to any IPv6 address that is configured on an affected device. A successful exploit could allow the attacker to cause the dhcp_snoop process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.
CVE records published in 2024 (ids starting CVE-2024-), sorted by how likely they are to be exploited.