CVEs of 2024.
Every CVE published in 2024 that we hold, ranked by exploit odds.
-
CVE-2024-20353
A vulnerability in the management and VPN web servers for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to incomplete error checking when parsing an HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted web server on a device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads.
-
CVE-2024-50320
An infinite loop in Ivanti Avalanche before 6.4.6 allows a remote unauthenticated attacker to cause a denial of service.
-
CVE-2024-20290
A vulnerability in the OLE2 file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an incorrect check for end-of-string values during scanning, which may result in a heap buffer over-read. An attacker could exploit this vulnerability by submitting a crafted file containing OLE2 content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software and consuming available system resources. For a description of this vulnerability, see the ClamAV blog .
-
CVE-2024-3393
A Denial of Service vulnerability in the DNS Security feature of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to send a malicious packet through the data plane of the firewall that reboots the firewall. Repeated attempts to trigger this condition will cause the firewall to enter maintenance mode.
-
CVE-2024-31152
The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.
-
CVE-2024-20481
A vulnerability in the Remote Access VPN (RAVPN) service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) of the RAVPN service. This vulnerability is due to resource exhaustion. An attacker could exploit this vulnerability by sending a large number of VPN authentication requests to an affected device. A successful exploit could allow the attacker to exhaust resources, resulting in a DoS of the RAVPN service on the affected device. Depending on the impact of the attack, a reload of the device may be required to restore the RAVPN service. Services that are not related to VPN are not affected. Cisco Talos discussed these attacks in the blog post Large-scale brute-force activity targeting VPNs, SSH services with commonly used login credentials.
-
CVE-2023-49074
A denial of service vulnerability exists in the TDDP functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of network requests can lead to reset to factory settings. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.
-
CVE-2024-12342
A vulnerability was found in TP-Link VN020 F3v(T) TT_V6.2.1021. It has been rated as critical. This issue affects some unknown processing of the file /control/WANIPConnection of the component Incomplete SOAP Request Handler. The manipulation leads to denial of service. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.
-
CVE-2021-1285
Multiple Cisco products are affected by a vulnerability in the Ethernet Frame Decoder of the Snort detection engine that could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper handling of error conditions when processing Ethernet frames. An attacker could exploit this vulnerability by sending malicious Ethernet frames through an affected device. A successful exploit could allow the attacker to exhaust disk space on the affected device, which could result in administrators being unable to log in to the device or the device being unable to boot up correctly.Note: Manual intervention is required to recover from this situation. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-36136
An off-by-one error in WLInfoRailService in Ivanti Avalanche 6.3.1 allows a remote unauthenticated attacker to crash the service, resulting in a DoS.
-
CVE-2024-4791
A vulnerability classified as critical was found in Contemporary Control System BASrouter BACnet BASRT-B 2.7.2. This vulnerability affects unknown code of the component Application Protocol Data Unit. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263890 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-38535
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Suricata can run out of memory when parsing crafted HTTP/2 traffic. Upgrade to 6.0.20 or 7.0.6.
-
CVE-2024-26007
An improper check or handling of exceptional conditions vulnerability [CWE-703] in Fortinet FortiOS version 7.4.1 allows an unauthenticated attacker to provoke a denial of service on the administrative interface via crafted HTTP requests.
-
CVE-2024-50321
An infinite loop in Ivanti Avalanche before 6.4.6 allows a remote unauthenticated attacker to cause a denial of service.
-
CVE-2024-50319
An infinite loop in Ivanti Avalanche before 6.4.6 allows a remote unauthenticated attacker to cause a denial of service.
-
CVE-2024-33774
A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via formWlanSetup_Wizard allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."
-
CVE-2024-43414
Apollo Federation is an architecture for declaratively composing APIs into a unified graph. Each team can own their slice of the graph independently, empowering them to deliver autonomously and incrementally. Instances of @apollo/query-planner >=2.0.0 and <2.8.5 are impacted by a denial-of-service vulnerability. @apollo/gateway versions >=2.0.0 and < 2.8.5 and Apollo Router <1.52.1 are also impacted through their use of @apollo/query-panner. If @apollo/query-planner is asked to plan a sufficiently complex query, it may loop infinitely and never complete. This results in unbounded memory consumption and either a crash or out-of-memory (OOM) termination. This issue can be triggered if you have at least one non-@key field that can be resolved by multiple subgraphs. To identify these shared fields, the schema for each subgraph must be reviewed. The mechanism to identify shared fields varies based on the version of Federation your subgraphs are using. You can check if your subgraphs are using Federation 1 or Federation 2 by reviewing their schemas. Federation 2 subgraph schemas will contain a @link directive referencing the version of Federation being used while Federation 1 subgraphs will not. For example, in a Federation 2 subgraph, you will find a line like @link(url: "https://specs.apollo.dev/federation/v2.0"). If a similar @link directive is not present in your subgraph schema, it is using Federation 1. Note that a supergraph can contain a mix of Federation 1 and Federation 2 subgraphs. This issue results from the Apollo query planner attempting to use a Number exceeding Javascript’s Number.MAX_VALUE in some cases. In Javascript, Number.MAX_VALUE is (2^1024 - 2^971). When the query planner receives an inbound graphql request, it breaks the query into pieces and for each piece, generates a list of potential execution steps to solve the piece. These candidates represent the steps that the query planner will take to satisfy the pieces of the larger query. As part of normal operations, the query planner requires and calculates the number of possible query plans for the total query. That is, it needs the product of the number of query plan candidates for each piece of the query. Under normal circumstances, after generating all query plan candidates and calculating the number of all permutations, the query planner moves on to stack rank candidates and prune less-than-optimal options. In particularly complex queries, especially those where fields can be solved through multiple subgraphs, this can cause the number of all query plan permutations to balloon. In worst-case scenarios, this can end up being a number larger than Number.MAX_VALUE. In Javascript, if Number.MAX_VALUE is exceeded, Javascript represents the value as “infinity”. If the count of candidates is evaluated as infinity, the component of the query planner responsible for pruning less-than-optimal query plans does not actually prune candidates, causing the query planner to evaluate many orders of magnitude more query plan candidates than necessary. This issue has been addressed in @apollo/query-planner v2.8.5, @apollo/gateway v2.8.5, and Apollo Router v1.52.1. Users are advised to upgrade. This issue can be avoided by ensuring there are no fields resolvable from multiple subgraphs. If all subgraphs are using Federation 2, you can confirm that you are not impacted by ensuring that none of your subgraph schemas use the @shareable directive. If you are using Federation 1 subgraphs, you will need to validate that there are no fields resolvable by multiple subgraphs.
-
CVE-2024-20467
A vulnerability in the implementation of the IPv4 fragmentation reassembly code in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper management of resources during fragment reassembly. An attacker could exploit this vulnerability by sending specific sizes of fragmented packets to an affected device or through a Virtual Fragmentation Reassembly (VFR)-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability affects Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers if they are running Cisco IOS XE Software Release 17.12.1 or 17.12.1a.
-
CVE-2020-27124
A vulnerability in the SSL/TLS handler of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause the affected device to reload unexpectedly, leading to a denial of service (DoS) condition. The vulnerability is due to improper error handling on established SSL/TLS connections. An attacker could exploit this vulnerability by establishing an SSL/TLS connection with the affected device and then sending a malicious SSL/TLS message within that connection. A successful exploit could allow the attacker to cause the device to reload.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
-
CVE-2024-38534
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.
-
CVE-2024-43783
The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Instances of the Apollo Router running versions >=1.21.0 and < 1.52.1 are impacted by a denial of service vulnerability if _all_ of the following are true: 1. The Apollo Router has been configured to support [External Coprocessing](https://www.apollographql.com/docs/router/customizations/coprocessor). 2. The Apollo Router has been configured to send request bodies to coprocessors. This is a non-default configuration and must be configured intentionally by administrators. Instances of the Apollo Router running versions >=1.7.0 and <1.52.1 are impacted by a denial-of-service vulnerability if all of the following are true: 1. Router has been configured to use a custom-developed Native Rust Plugin. 2. The plugin accesses Request.router_request in the RouterService layer. 3. You are accumulating the body from Request.router_request into memory. If using an impacted configuration, the Router will load entire HTTP request bodies into memory without respect to other HTTP request size-limiting configurations like limits.http_max_request_bytes. This can cause the Router to be out-of-memory (OOM) terminated if a sufficiently large request is sent to the Router. By default, the Router sets limits.http_max_request_bytes to 2 MB. If you have an impacted configuration as defined above, please upgrade to at least Apollo Router 1.52.1. If you cannot upgrade, you can mitigate the denial-of-service opportunity impacting External Coprocessors by setting the coprocessor.router.request.body configuration option to false. Please note that changing this configuration option will change the information sent to any coprocessors you have configured and may impact functionality implemented by those coprocessors. If you have developed a Native Rust Plugin and cannot upgrade, you can update your plugin to either not accumulate the request body or enforce a maximum body size limit. You can also mitigate this issue by limiting HTTP body payload sizes prior to the Router (e.g., in a proxy or web application firewall appliance).
-
CVE-2020-3548
A vulnerability in the Transport Layer Security (TLS) protocol implementation of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to inefficient processing of incoming TLS traffic. An attacker could exploit this vulnerability by sending a series of crafted TLS packets to an affected device. A successful exploit could allow the attacker to trigger a prolonged state of high CPU utilization. The affected device would still be operative, but response time and overall performance may be degraded.There are no workarounds that address this vulnerability.
-
CVE-2024-33700
The LevelOne WBR-6012 router firmware R0.40e6 suffers from an input validation vulnerability within its FTP functionality, enabling attackers to cause a denial of service through a series of malformed FTP commands. This can lead to device reboots and service disruption.
-
CVE-2021-1440
A vulnerability in the implementation of the Resource Public Key Infrastructure (RPKI) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Border Gateway Protocol (BGP) process to crash, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of a specific RPKI to Router (RTR) Protocol packet header. An attacker could exploit this vulnerability by compromising the RPKI validator server and sending a specifically crafted RTR packet to an affected device. Alternatively, the attacker could use man-in-the-middle techniques to impersonate the RPKI validator server and send a specifically crafted RTR response packet over the established RTR TCP connection to the affected device. A successful exploit could allow the attacker to cause a DoS condition because the BGP process could constantly restart and BGP routing could become unstable.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2021 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see .
-
CVE-2024-5491
Denial of Service in NetScaler ADC and NetScaler Gateway in NetScaler
-
CVE-2024-20351
A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.
-
CVE-2024-45813
find-my-way is a fast, open source HTTP router, internally using a Radix Tree (aka compact Prefix Tree), supports route params, wildcards, and it's framework independent. A bad regular expression is generated any time one has two parameters within a single segment, when adding a `-` at the end, like `/:a-:b-`. This may cause a denial of service in some instances. Users are advised to update to find-my-way v8.2.2 or v9.0.1. or subsequent versions. There are no known workarounds for this issue.
-
CVE-2024-20455
A vulnerability in the process that classifies traffic that is going to the Unified Threat Defense (UTD) component of Cisco IOS XE Software in controller mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because UTD improperly handles certain packets as those packets egress an SD-WAN IPsec tunnel. An attacker could exploit this vulnerability by sending crafted traffic through an SD-WAN IPsec tunnel that is configured on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: SD-WAN tunnels that are configured with Generic Routing Encapsulation (GRE) are not affected by this vulnerability.
-
CVE-2024-20268
A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an unexpected reload of the device. This vulnerability is due to insufficient input validation of SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device using IPv4 or IPv6. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects all versions of SNMP (versions 1, 2c, and 3) and requires a valid SNMP community string or valid SNMPv3 user credentials.
-
CVE-2024-20484
A vulnerability in the External Agent Assignment Service (EAAS) feature of Cisco Enterprise Chat and Email (ECE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of Media Routing Peripheral Interface Manager (MR PIM) traffic that is received by an affected device. An attacker could exploit this vulnerability by sending crafted MR PIM traffic to an affected device. A successful exploit could allow the attacker to trigger a failure on the MR PIM connection between Cisco ECE and Cisco Unified Contact Center Enterprise (CCE), leading to a DoS condition on EAAS that would prevent customers from starting chat, callback, or delayed callback sessions. Note: When the attack traffic stops, the EAAS process must be manually restarted to restore normal operation. To restart the process in the System Console, choose Shared Resources > Services > Unified CCE > EAAS, then click Start.
-
CVE-2024-8454
The swctrl service is used to detect and remotely manage PLANET Technology devices. Certain switch models have a Denial-of-Service vulnerability in the swctrl service, allowing unauthenticated remote attackers to send crafted packets that can crash the service.
-
CVE-2024-9787
A vulnerability, which was classified as problematic, was found in Contemporary Control System BASrouter BACnet BASRT-B 2.7.2. This affects an unknown part of the component UDP Packet Handler. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2024-48809
An issue in Open Networking Foundations sdran-in-a-box v.1.4.3 and onos-a1t v.0.2.3 allows a remote attacker to cause a denial of service via the onos-a1t component of the sdran-in-a-box, specifically the DeleteWatcher function.
-
CVE-2024-20260
Update for September 16, 2026: The original 1.0 version of this advisory was specific to the Cisco Adaptive Security Virtual Appliance (ASAv) and Cisco Secure Firewall Threat Defense Virtual (FTDv) models. However, it was later found that this vulnerability affects all Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software platforms. A vulnerability in the VPN and management web servers of the Cisco Secure Firewall ASA Software and Cisco Secure FTD Software platforms could allow an unauthenticated, remote attacker to cause an affected device to run out of system memory or buffer blocks, which in turn could cause SSL VPN connection processing to slow down and eventually cease altogether. This vulnerability is due to a lack of proper memory management for new incoming SSL/TLS connections. An attacker could exploit this vulnerability by sending a large number of new incoming SSL/TLS connections to the targeted device. A successful exploit could allow the attacker to deplete system memory or buffers, resulting in a denial of service (DoS) condition. The memory or buffers could be reclaimed slowly if the attack traffic is stopped, but a manual reload may be required to restore operations quickly.
-
CVE-2024-47522
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, invalid ALPN in TLS/QUIC traffic when JA4 matching/logging is enabled can lead to Suricata aborting with a panic. This issue has been addressed in 7.0.7. One may disable ja4 as a workaround.
-
CVE-2024-20304
A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.
-
CVE-2024-39552
An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.
-
CVE-2024-56073
An issue was discovered in FastNetMon Community Edition through 1.2.7. Zero-length templates for Netflow v9 allow remote attackers to cause a denial of service (divide-by-zero error and application crash).
-
CVE-2024-20480
A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover. This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover.
-
CVE-2024-20464
A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet.
-
CVE-2024-20493
A vulnerability in the login authentication functionality of the Remote Access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to deny further VPN user authentications for several minutes, resulting in a temporary denial of service (DoS) condition. This vulnerability is due to ineffective handling of memory resources during the authentication process. An attacker could exploit this vulnerability by sending crafted packets, which could cause resource exhaustion of the authentication process. A successful exploit could allow the attacker to deny authentication for Remote Access SSL VPN users for several minutes, resulting in a temporary DoS condition.
-
CVE-2024-20500
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
-
CVE-2024-0101
NVIDIA Mellanox OS, ONYX, Skyway, MetroX-2 and MetroX-3 XC contain a vulnerability in ipfilter, where improper ipfilter definitions could enable an attacker to cause a failure by attacking the switch. A successful exploit of this vulnerability might lead to denial of service.
-
CVE-2024-45795
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, rules using datasets with the non-functional / unimplemented "unset" option can trigger an assertion during traffic parsing, leading to denial of service. This issue is addressed in 7.0.7. As a workaround, use only trusted and well tested rulesets.
-
CVE-2024-20402
A vulnerability in the SSL VPN feature for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a logic error in memory management when the device is handling SSL VPN connections. An attacker could exploit this vulnerability by sending crafted SSL/TLS packets to the SSL VPN server of the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
-
CVE-2024-20502
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
-
CVE-2024-20495
A vulnerability in the Remote Access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of client key data after the TLS session is established. An attacker could exploit this vulnerability by sending a crafted key value to an affected system over the secure TLS session. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
-
CVE-2024-47257
Florent Thiéry has found that selected Axis devices were vulnerable to handling certain ethernet frames which could lead to the Axis device becoming unavailable in the network. Axis has released patched AXIS OS versions for the highlighted flaw for products that are still under AXIS OS software support. Please refer to the Axis security advisory for more information and solution.
-
CVE-2024-38520
SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. When SoftEtherVPN is deployed with L2TP enabled on a device, it introduces the possibility of the host being used for amplification/reflection traffic generation because it will respond to every packet with two response packets that are larger than the request packet size. These sorts of techniques are used by external actors who generate spoofed source IPs to target a destination on the internet. This vulnerability has been patched in version 5.02.5185.
-
CVE-2024-39555
An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition. Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset: BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list) Only systems with segment routing enabled are vulnerable to this issue. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session. This issue affects: Junos OS: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved: * All versions before 21.4R3-S8-EVO, * from 22.2-EVO before 22.2R3-S4-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S1-EVO, * from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO.
CVE records published in 2024 (ids starting CVE-2024-), sorted by how likely they are to be exploited.