CVE-20XX-?
agent?

No fix yet.

CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.

7,659 CVEs · updated 2026-11-20 19:39 UTC

Reset all
  1. CVE-2026-99116

    In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone.

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  2. CVE-2026-99180

    In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone.

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  3. CVE-2026-99164

    In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from undersized DMA bounce buffers Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e. rounded up to the cache line size. As a result, the DMA API operates on memory beyond the end of the allocation. This was observed on a custom i.MX8MP platform with an mcp251xfd CAN controller under heavy RPMSG load, as a series of refcount_t warnings triggered from rpmsg_recv_done() in virtio_rpmsg_bus: refcount_t: addition on 0; use-after-free. refcount_t: underflow; use-after-free. refcount_t: saturated; leaking memory. Leading finally to an "Unable to handle kernel paging request" oops. Reproducing this problem took between 30 minutes and roughly 30 hours under the same workload. Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed it was overwritten from 2 to 1 by __pi_memcpy_generic() in the irq/155-spi2.0 thread. Additionally it was found that a "normal" rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In the error case the same sequence took about 215µs +/-10µs. Based on this, an LLM was used to identify the size mismatch fixed here. Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover the full mapped length, and use the same length for dma_sync_single_for_cpu() to stay consistent with map and unmap. With this patch applied, the same workload ran for more than 200 hours without the problem reproducing.

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  4. CVE-2026-99156

    In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between st_remove() and st_open() st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put().

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  5. CVE-2026-121293

    On affected EOS-based platforms, an attacker who controls a Border Gateway Protocol (BGP) peer can send a crafted BGP message over an established session with the Dynamic Path Selection (DPS) address family negotiated. This can cause the BGP process to terminate unexpectedly, resetting all BGP sessions and disrupting routing services until the process restarts.

    Memory safety

    6.9 MEDIUM 0.3% exploit odds No fix listed
  6. CVE-2026-99143

    In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit.

    Other OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  7. CVE-2026-99117

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: don't truncate the port group walk on teardown __br_multicast_disable_port_ctx() and br_multicast_del_port() walk port->mglist with hlist_for_each_entry_safe(). However, br_multicast_find_del_pg() can also delete other entries from the same list through br_multicast_fwd_src_remove() or __fwd_del_star_excl(). If such an entry is the iterator's saved next node, hlist_del_init() clears its ->next and terminates the walk early. The reproducer triggers this in both teardown walks, leaving port groups in the bridge mdb with a dangling ->key.port after del_nbp() frees the port: BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320 __mdb_fill_info+0x1191/0x1320 br_mdb_dump+0x594/0xe40 rtnl_mdb_dump+0x1cf/0x5d0 Use hlist_del_init_rcu() to unlink the group while preserving ->next. br_multicast_del_pg() and the teardown walks run under br->multicast_lock. The GC worker must acquire the same lock before detaching the group for destruction, so the node remains alive while the walk uses the preserved pointer. Preserving ->next means a walk can now reach a group that an earlier iteration already deleted as a side effect. That group is off mp->ports, so br_multicast_find_del_pg() would fall through its port scan and hit the trailing WARN_ON(1). Skip such groups at the top of that helper: a port group is put on port->mglist when it is created and only unlinked when it is deleted, so hlist_unhashed() identifies exactly this case.

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  8. CVE-2026-99213

    In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-established Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link.

    Denial of service OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  9. CVE-2026-99173

    In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: <TASK> tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __kmalloc_cache_noprof+0x249/0x560 eventfs_create_dir+0x7a/0x590 event_create_dir+0x2fb/0xcf0 trace_add_event_call+0xbf/0x150 [...] Freed by task 11: kfree+0x1db/0x5b0 srcu_invoke_callbacks+0x3a3/0x620 process_one_work+0x937/0x1810 worker_thread+0x4f1/0xd60 Before commit 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") release_ei() used call_rcu(), which covered the walker, while eventfs_iterate() needs the SRCU grace period. Wait for both and chain call_rcu() from the SRCU callback.

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  10. CVE-2026-99203

    In the Linux kernel, the following vulnerability has been resolved: pipe: preserve existing fasync readers on writer setup failure F_SETFL and FIOASYNC decide whether to invoke ->fasync() before pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can therefore both enter the callback. fasync_helper() allocates before checking for an existing entry. If the first enable installs both entries, a second enable can update the reader entry and then fail the allocation for the writer entry. The error path removes the pre-existing reader entry, clearing FASYNC while the writer entry remains registered. __fput() then skips ->fasync(), so a later pipe notification can dereference the freed file or its f_owner. An unprivileged memory-pressure reproducer triggers a KASAN slab-use-after-free in send_sigio() through this path. Keep the reader helper's result and undo the registration only if this call added it. The pipe mutex serializes changes to both lists, so a failed new registration still removes its reader, while a failed duplicate preserves the existing registrations and FASYNC. Successful duplicate enables continue to update fa_fd as before.

    Memory safety OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  11. CVE-2026-99177

    In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Fix page dirtying in sev_gmem_post_populate() set_page_dirty() requires that the caller holds some kind of lock to ensure that the page's mapping does not concurrently go away. That is not the case for a random page we got from get_user_pages_fast(), so use set_page_dirty_lock(). [sean: tag for stable]

    Other OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  12. CVE-2026-99107

    In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize().

    Other OS & kernel

    7.8 HIGH 0.1% exploit odds No fix listed
  13. CVE-2026-110291

    The Graphina – Charts and Graphs For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'iq_tree_chart_node_font_family (and any text control serialized into chart_data['settings'])' parameter in all versions up to, and including, 3.1.13 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Elementor's Utils::kses_post_deep() does not strip the attack payload on save because the payload contains no disallowed HTML tags — only a single quote and an event-handler fragment — allowing the malicious value to survive persistence.

    XSS Web app

    7.2 HIGH 0.2% exploit odds No fix listed
  14. CVE-2026-120974

    On affected platforms running Arista EOS with IPsec AutoVPN Feature configured with dynamic paths, the configured IPsec replay window may not be applied as expected. As a result, IPsec anti-replay protection may be silently inactive even when it has been configured via an SA policy, contrary to the operator's expectation. This issue does not allow decryption of the affected IPsec traffic, but it may allow replay of previously valid protected traffic.

    Other

    6.9 MEDIUM 0.3% exploit odds No fix listed
  15. CVE-2026-86343

    An improper neutralization of CRLF sequences vulnerability in the SNMP API in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users with administrator privileges to read or write arbitrary files and conduct denial-of-service attacks.

    Disclosure

    6.8 MEDIUM 0.5% exploit odds No fix listed
  16. CVE-2026-52899

    Deserialization of untrusted data for some BigDL software before version 2.5.0b1 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Code execution

    6.9 MEDIUM 0.4% exploit odds No fix listed
  17. CVE-2026-110072

    The Photo Gallery by 10Web WordPress plugin before 1.8.49 does not escape a shortcode attribute that sets a gallery watermark image before rendering it into an HTML image attribute, and decodes percent-encoded characters in the value, allowing users with Contributor-level access and above to perform Stored Cross-Site Scripting that executes in the browser of any user, including an administrator, who views the published gallery.

    XSS Web app

    6.8 MEDIUM 0.3% exploit odds No fix listed
  18. CVE-2026-118421

    The WP Directory Kit WordPress plugin before 1.6.3 does not properly sanitise and escape a parameter used to order results on one of its admin screens before using it in a SQL statement, relying on a keyword deny-list whose replacement order can be bypassed, making it possible for users holding the WP Directory Kit WordPress plugin before 1.6.3's custom Listing Admin role, and above, to perform SQL injection attacks.

    Injection Web app

    6.8 MEDIUM 0.2% exploit odds No fix listed
  19. CVE-2026-28731

    A memory corruption vulnerability exists in VideoLAN VLC 3.0.23. A specially crafted Interplay MVE file can trigger a condition that allows access to a variable that is not explicitly initialized, which under certain conditions can lead to code execution in the context of the current process.

    Memory safety

    6.5 MEDIUM 0.4% exploit odds No fix listed
  20. CVE-2026-84294

    Improper limitation of pathname in the Ad Hoc Transfer component of Progress Software WS_FTP Server versions prior to 2024.0.6 and 2025.0.3 on Windows could allow an authenticated user to access files outside intended directories.

    Disclosure Server

    7.7 HIGH 0.4% exploit odds No fix listed
  21. CVE-2026-129933

    The MongoDB Java Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.

    Other OS & kernel MongoDB Java Driver

    6.3 MEDIUM No fix listed
  22. CVE-2026-113631

    Incorrect authorization in the sendForm RPC handler and Session JWT reconnect handling in ONLYOFFICE Docs (Document Server) 9.4.0-129 on the official onlyoffice/documentserver container allows an authenticated view-only user to export a reconstructed copy of a document, including content the viewer never displayed such as custom XML, custom document properties and field instruction text, even when download and form-filling are disabled. The attacker reconnects with a valid Session JWT while substituting an attacker-controlled callback URL, which the Session JWT does not bind, then invokes sendForm over RPC, causing DocumentServer to send the reconstructed DOCX to that URL.

    Auth & access Server

    6.5 MEDIUM 0.3% exploit odds No fix listed
  23. CVE-2026-98968

    In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).

    Memory safety Network gear

    8.1 HIGH 0.5% exploit odds No fix listed
  24. CVE-2026-99064

    In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together.

    Other OS & kernel

    8.1 HIGH 0.5% exploit odds No fix listed
  25. CVE-2026-131277

    In Splunk SOAR versions below 8.8.0, a user that holds a role with permission to edit playbooks and repositories could store a modified utility block in a playbook. If a user that holds a role with permission to edit playbook code later opens and saves the playbook in the Visual Playbook Editor, a subsequent playbook run could send a Representational State Transfer (REST) API delete request to a resource outside the intended data list. The user account that runs the playbook must have permission to delete the target resource. The vulnerability is possible because Splunk SOAR does not prevent a utility block from changing the intended REST API request path. For more information see Data management automation API (https://help.splunk.com/en/splunk-soar/soar-on-premises/python-playbook-api-reference/6.3.0/automation-api/data-management-automation-api) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.

    Disclosure Splunk SOAR

    6.3 MEDIUM No fix listed
  26. CVE-2026-131267

    In Splunk SOAR versions below 8.8.0, a user that holds a role with the System Settings view and edit permissions could test a Lightweight Directory Access Protocol authentication provider and cause Splunk SOAR to send a stored directory service account bind password to a host that the user controls. The vulnerability is possible because Splunk SOAR reuses a stored directory service provider credential when an authentication test uses a different directory service connection destination.

    Auth & access Splunk SOAR

    6.3 MEDIUM No fix listed
  27. CVE-2026-131264

    In Splunk SOAR versions below 8.8.0, a user that holds a role with the System Settings edit permission could cause Splunk SOAR to send the stored root credential for an external credential store to a host that the user controls. Depending on the configuration, the exposed credential could include an access token, application secret, account password, or client certificate. The vulnerability is possible because Splunk SOAR reuses the stored credential when the user changes the external credential store endpoint without supplying replacement credentials.

    Auth & access Splunk SOAR

    6.3 MEDIUM No fix listed
  28. CVE-2026-131227

    In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in Network Resolution data. If another user who can access the Domain Name System Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Domain Name System Search dashboard encodes data-model field values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Protocol intelligence dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/protocol-intelligence-dashboards) in the Splunk documentation.

    Injection Splunk Enterprise Security

    6.3 MEDIUM No fix listed
  29. CVE-2026-131180

    In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who holds the "power" Splunk role could create and share a dashboard that contains attacker-controlled Search Processing Language (SPL). The SPL could run using the permissions of the user who opens the dashboard. With this access, the user who created the dashboard could expose stored credentials and write data to an index. The vulnerability is possible because Splunk Enterprise does not correctly escape field names in searches that use the rename command. For more information see rename (https://help.splunk.com/en/splunk-enterprise/spl-search-reference/10.4/search-commands/rename) and SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) in the Splunk documentation.

    Other Splunk Enterprise

    6.3 MEDIUM No fix listed
  30. CVE-2026-129935

    The MongoDB Go Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.

    Other OS & kernel MongoDB GO Driver

    6.3 MEDIUM No fix listed
  31. CVE-2026-129937

    The MongoDB C# Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.

    Other OS & kernel MongoDB C# Driver

    6.3 MEDIUM No fix listed
  32. CVE-2026-129925

    The MongoDB Ruby Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.

    Other OS & kernel MongoDB Ruby Driver

    6.3 MEDIUM No fix listed
  33. CVE-2026-129926

    The MongoDB Python Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.

    Other OS & kernel MongoDB Python Driver

    6.3 MEDIUM No fix listed
  34. CVE-2026-129923

    The MongoDB Rust Driver does not neutralize NUL characters in the user name and password values it places into the message it builds for SASL PLAIN authentication. A party who can choose the login values that an application passes to the driver can alter where the fields of that message begin and end. This may result in a receiving system reading a login name and secret that differ from the values the application supplied. Authenticating as a different account still requires that account's password. Only deployments that use SASL PLAIN authentication are affected.

    Other OS & kernel MongoDB Rust Driver

    6.3 MEDIUM No fix listed
  35. CVE-2026-63540

    Heap-based buffer overflow for some Hyperscan before version v5.4.2.1 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety

    6.9 MEDIUM 0.1% exploit odds No fix listed
  36. CVE-2026-55709

    Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Denial of service OS & kernel

    6.9 MEDIUM 0.1% exploit odds No fix listed
  37. CVE-2026-28730

    Null pointer dereference for some Hyperscan before version v5.4.2.1 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety

    6.9 MEDIUM 0.1% exploit odds No fix listed
  38. CVE-2026-40427

    Use after free for some Intel(R) QuickAssist Technology Driver for Windows within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety OS & kernel

    6.9 MEDIUM 0.1% exploit odds No fix listed
  39. CVE-2026-33279

    Out-of-bounds write for the Intel(R) VTune(TM) Profiler software before version 2026.0.0 within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety

    6.9 MEDIUM 0.1% exploit odds No fix listed
  40. CVE-2026-33571

    Out-of-bounds read for the Intel(R) VTune(TM) Profiler software before version 2026.0.0 within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety

    6.9 MEDIUM 0.1% exploit odds No fix listed
  41. CVE-2026-28743

    Out-of-bounds write for the Intel(R) VTune(TM) Profiler software before version 2026.0.0 within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.

    Memory safety

    6.9 MEDIUM 0.1% exploit odds No fix listed
  42. CVE-2026-112850

    Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in AncoraThemes Your Dress your-dress allows PHP Local File Inclusion.This issue affects Your Dress: from n/a through 1.4.1.

    Disclosure Web app

    8.1 HIGH 0.3% exploit odds No fix listed
  43. CVE-2026-129403

    Joomla Extension - vi-solutions - Missing access check in reload task in Visforms extension 1.0.0-5.6.4, 6.0.0-6.2.1 - The public reload task did not check form and field access levels, allowing unauthenticated users to retrieve results of SQL field statements of restricted forms.

    Auth & access Web app vi-solutions Visforms Extension For Joomla

    6.3 MEDIUM No fix listed
  44. CVE-2026-129405

    Joomla Extension - vi-solutions - Predictable and reusable email verification codes in Visforms extension 1.0.0-5.6.4, 6.0.0-6.2.1 - Email verification codes were derived from the email address, did not expire after use and could be guessed without attempt limits, allowing bypass of the email verification.

    Other Web app vi-solutions Visforms Extension For Joomla

    6.3 MEDIUM No fix listed
  45. CVE-2026-129406

    Joomla Extension - vi-solutions - Verification mail rate limit reset in Visforms extension 1.0.0-5.6.4, 6.0.0-6.2.1 - The rate limit for verification mails was reset on every form render, rendering the limit ineffective.

    Other Web app vi-solutions Visforms Extension For Joomla

    6.3 MEDIUM No fix listed
  46. CVE-2026-129416

    Joomla Extension - vi-solutions - Access restriction bypass for form submissions in Visforms extension 1.0.0-5.6.4, 6.0.0-6.2.1 - Form submissions did not check the access level of the form, allowing guests to submit forms restricted to specific user groups.

    Auth & access Web app vi-solutions Visforms Extension For Joomla

    6.3 MEDIUM No fix listed
  47. CVE-2026-129417

    Joomla Extension - vi-solutions - Path traversal in file upload in Visforms extension 1.0.0-5.6.4, 6.0.0-6.2.1 - File names of uploads were not reduced to their base name when the option to retain original file names was enabled, potentially allowing files to be written outside the upload directory.

    Disclosure Web app vi-solutions Visforms Extension For Joomla

    6.3 MEDIUM No fix listed
  48. CVE-2026-112852

    Deserialization of Untrusted Data vulnerability in ThemeREX Group Helion helion allows Object Injection.This issue affects Helion: from n/a through 1.1.12.

    Code execution

    8.1 HIGH 0.3% exploit odds No fix listed
  49. CVE-2026-106096

    A flaw was found in CRI-O. When the optional Linux LinkLogs feature is enabled, the host pod log directory is bind-mounted into a pod emptyDir and is intended to be read-only, but Linux ignores MS_RDONLY on the initial bind and the CRI mount stays writable. A non-privileged UID 0 container can place a symlink at a future kubelet log path so that privileged conmon later appends attacker-controlled log data to an existing host file. This is an append-only host integrity issue, not universal remote code execution; LinkLogs is not enabled by default.

    Other Server Red Hat Confidential Compute Attestation

    6.4 MEDIUM 0.2% exploit odds No fix listed
  50. CVE-2026-131808

    United Chargers Grizzl-E Smart 40A Wi-Fi Configuration Server Missing Authentication Vulnerability. This vulnerability allows network-adjacent attackers to modify Wi-Fi configuration on affected installations of United Chargers Grizzl-E Smart 40A EV chargers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of Wi-Fi configuration requests. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the device. Was ZDI-CAN-29068.

    Auth & access Device United Chargers Grizzl-E Smart 40A

    6.3 MEDIUM No fix listed

CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.