CVE-20XX-?
agent?

No fix yet.

CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.

7,557 CVEs · updated 2026-11-21 06:31 UTC

Reset all
  1. CVE-2026-98937

    In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and prevents unprivileged use of kernel callchain capture.

    Other OS & kernel

    unscored 0.3% exploit odds No fix listed
  2. CVE-2026-99036

    In the Linux kernel, the following vulnerability has been resolved: dm: fix reading free memory in do_resume When do_resume calls dm_table_get_mode(new_map), the call is done without holding any locks (it only holds a reference to the md). It may be possible that another concurrent ioctl on the same device will swap table after dm_swap_table and before dm_table_get_mode. In this case, dm_table_get_mode(new_map) reads freed memory. This race condition was triggered by syzbot. This commit fixes the race by reading mode of the new table before dm_swap_table. Note that new_map is also passed to dm_ima_need_measure, but this function doesn't attempt to dereference it, so this call should be safe. Note that this is not a security bug because only root can trigger it and the commonly used tools such as lvm or cryptsetup do not call the ioctls concurrently, so that they can't trigger it acceidentally.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-98977

    In the Linux kernel, the following vulnerability has been resolved: namespace: handle mount locking for automounts correctly If mounts are propagated across user namespaces, attach_recursive_mnt() locks every copy of the source mount to protect overmounts from vanishing and revealing the underlying files or directories. The user namespace is taken from the caller's mount namespaces since this is where the mounts end up. Except, that's not always true. Automounts may legitimately get popped in by tasks located in a different mount and user namespace during path lookup. Then check doesn't make sense at that point. The copy in the namespace of the parent - which may be the host's - is now locked and the host cannot change the flags of its own mounts anymore. Here's the reproducer: - host has debugfs mounted nosuid,nodev,noexec and shared - tracefs automount below it is not yet active - hand a child process a directory descriptor on that mount - child process enters auser and mount namespace - child process' namespace now holds a locked copy of the host's debugfs mount that receives propagation from it - child process stats "tracing/." through the descriptor - lookup runs on the host's mount so the automount lands below the host's mount - propagation puts a copy below the child's copy - both try to clear the flags on the mount they got, with a bind remount: host, on its own automount: MS_REMOUNT|MS_BIND = EPERM child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0 So the lock landed on the host's mount instead of the child's copy. Congrats. So we need to compare with the owner of the namespace the mount actually gets mounted on. For all regular cases that is the caller's mount namespace and so nothing changes. Detached trees in anonymous mount namespaces by be handed over via SCM_RIGHTS or inherited in other ways on purpose so the attaching task's mount namespace is authoritative, not the creator of the detached tree.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-98935

    In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkalrm has padding holes after the 'pending' member. When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized kernel stack data residing in these holes may be leaked. Zero-initialize the struct at declaration to eliminate this information leak risk. Fixes smatch warnings: - drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't leak information (struct has a hole after 'pending')

    Disclosure OS & kernel

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-98979

    In the Linux kernel, the following vulnerability has been resolved: namespace: refuse an automount below a mount that is in no namespace It's possible to add autmounts even when the parent mount isn't in the mount namespace of the caller. The only requirement we have is that the parent mount namespace must not be NULL, i.e., unmounted. Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes that trivially true. So that passes the test and attach_recursive_mnt() accepts that as a mount point and funny enough, count_mounts() dereferences MNT_NS_INTERNAL. The problem is it is an error pointer... So we can reach this in userspace via fanotify. A filesystem mark on the lower filesystem of an overlay reports paths on the layer clone and reading the event hands out a descriptor on it. For example with debugfs as the lower layer it goes kaboom: openat(evfd, "tracing", O_DIRECTORY) Oops: general protection fault KASAN: null-ptr-deref in range [0x1d0-0x1d7] RIP: 0010:count_mounts+0x35/0x200 attach_recursive_mnt finish_automount And since that sleeping beauty happens under namespace_sem held for writing every mount operation on the system blocks from then on. Congrats. Use is_mounted() instead which rejects unmounted and internal mounts alike. The open fails with EINVAL just as it did before clone_private_mount() used MNT_NS_INTERNAL.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-98969

    In the Linux kernel, the following vulnerability has been resolved: net/sched: em_text: reject unterminated algo before autoload This is a follow-up to commit 9c572a83037a ("net/sched: fix potential stack infoleak in em_text_dump()"), which zero-initialised the dump-side struct. Sashiko pointed at a pre-existing bug that exposed the change-side input-validation gap open. em_text_change() casts the raw netlink attribute payload to struct tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf() walks %s until it finds a NUL, so an algo[] with no NUL reads past the array into the adjacent struct fields and payload and feeds those bytes to the usermode helper command line. This is an out-of-bounds read and a kernel memory disclosure. Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes, matching the check xt_string has had since 3ab720881b6e. Conditions to recreate the bug: - CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn is enough) - install clsact on an interface, then add a basic filter with one text ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and pattern_len at least 1 - the add fails with -ENOENT and the kernel invokes modprobe with a module name made of "ts_" plus the 16 bytes and the adjacent payload

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-98970

    In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Free the BO cache size list on teardown vc4_bo_cache_destroy() purges the cached BOs but never frees the size list, leaking it on every unbind.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-98955

    In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transport header inside the Ethernet header. Such skbs are not exotic: - At the time of commit d0c081b49137 ("flow_dissector: properly cap thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO skbs larger than 64KB (MTU checks are skipped for GSO, and alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0 pages on top of the linear part). - BIG TCP now makes skbs larger than 64KB common. - The following patch makes tun_get_user() dissect IFF_TAP frames before eth_type_trans() pulls the Ethernet header, so a GSO frame carrying a 65522..65535 byte L3 packet will be dissected with skb->len in [65536, 65549]. Compare as u32 instead. If the resulting offset cannot be represented in the u16 key_control->thoff, cap it to U16_MAX and report the dissection as failed rather than silently returning a wrong transport offset. thoff is still set on failure, as some callers (such as eth_get_headlen()) use it regardless of the return value.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-98934

    In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net(). WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930 Call trace: __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P) __skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903 skb_get_hash include/linux/skbuff.h:1663 [inline] seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132 __seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161 seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431 seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681 seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744 lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356 dst_output include/net/dst.h:470 [inline] ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131 iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97 udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187 tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202 tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274 tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576 tipc_enable_bearer net/tipc/bearer.c:366 [inline] __tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048 tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057 genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-99071

    In the Linux kernel, the following vulnerability has been resolved: ipv4: do not warn on route notification size race Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added asynchronous route notifications for hardware flag changes. fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later fills it with fib_dump_info() while holding only RCU. With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. fib_dump_info() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-99047

    In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-98971

    In the Linux kernel, the following vulnerability has been resolved: gpio: exar: initialize the ID before registering its cleanup devm_add_action_or_reset() invokes the cleanup action immediately when registering the action fails. gpio_exar_probe() currently stores the allocated ID in exar_gpio only after registering the action, so that failure makes exar_devm_ida_free() release ID 0. If the allocated ID is nonzero, this leaks that ID and can free ID 0 belonging to another device. Store the ID before registering the cleanup action so both the immediate failure path and normal device teardown release the correct allocation.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99080

    In the Linux kernel, the following vulnerability has been resolved: fs: Free any excess xarray nodes in clear_inode() For many years we've had a hard to hit leak of xarray nodes. Hugh documented it well in commit 786b31121a2c. Recently people and syzbot have found ways to force it to happen with madvise. Rather than fix the leaks where they happen, just call xa_destroy() which has the side-effect of cycling the i_pages lock.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99005

    In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99058

    In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in chained work check current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99040

    In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix add_key() race with keyring restriction __key_create_or_update() snapshots keyring->restrict_link before taking the destination keyring's semaphore. keyring_restrict() installs a restriction while holding that semaphore. This allows a writer to observe no restriction, wait for the keyring owner to install a reject-all restriction and return successfully, and then link a key using the stale NULL snapshot. The writer only needs write permission on the destination keyring. Move the restrict_link read after __key_link_lock() and __key_link_begin(). The read and the subsequent restriction check are then serialized with restriction installation by keyring->sem. The race was reproduced on v7.2.8 in 19 executions where restriction installation returned before the link completed. All 19 linked the key despite the reject-all restriction. With this change, 312 executions reached the same ordering and every add_key() call failed with -EPERM. The issue was found by manual concurrency analysis assisted by AI-based analysis and independently verified with a QEMU reproducer and kernel instrumentation.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-98925

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-98930

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99057

    In the Linux kernel, the following vulnerability has been resolved: xen/netfront: don't leak the skb when xennet_fill_frags() fails When a response chain has more slots than fit in the skb's frags, xennet_fill_frags() returns an error and xennet_poll() jumps to its error path. That path moves what's left on tmpq to errq to be freed, but the skb being filled was already dequeued from tmpq, so it's never freed. Each chain that overflows leaks the skb and the pages attached to it as frags, and the backend decides how many slots it sends. Put the skb back on tmpq before taking the error path, like the xennet_set_skb_gso() failure just above it does.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99045

    In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99033

    In the Linux kernel, the following vulnerability has been resolved: net/packet: guard the ll header push in packet_rcv_spkt() packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: <IRQ> skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99027

    In the Linux kernel, the following vulnerability has been resolved: net: team: stop reusing skb after queue override A nonzero dev_queue_xmit() result does not return ownership of the skb. When an override port's qdisc drops it, the queue override helper used to try another port or the mode transmit op with the freed skb. Return the handoff decision separately from transmit success. Select only the first override port under RCU and stop after handing it the skb, regardless of the lower transmit result. Keep the existing success and drop accounting. BUG: KASAN: slab-use-after-free in sk_skb_reason_drop Write of size 4 by task poc/5040 sk_skb_reason_drop (net/core/skbuff.c:1240) dev_kfree_skb_any_reason (net/core/dev.c:3470) ab_transmit (drivers/net/team/team_mode_activebackup.c:49) team_xmit (drivers/net/team/team_core.c:1849) __dev_direct_xmit (net/core/dev.c:4934) Freed by task 5040: __tcf_kfree_skb_list (net/sched/sch_generic.c:43) __dev_queue_xmit (net/core/dev.c:4831) team_xmit (drivers/net/team/team_core.c:1846) Kernel panic - not syncing: KASAN: panic_on_warn set ...

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99019

    In the Linux kernel, the following vulnerability has been resolved: scsi: ch: Do not keep references to data transfer element devices ch_readconfig() looks up the scsi_device of every data transfer element whose SCSI id the changer reports in READ ELEMENT STATUS, and stores it in ch->dt[]. scsi_device_lookup() takes a reference, and nothing ever drops it: ch_destroy() frees the array with kfree(). ch->dt[] is read nowhere else - it only supplies the vendor, model and revision printed in the same loop. Once such a drive is removed, its scsi_device can never be released. It stays on the host's device list at its address, so a new device there is refused by anything that walks the list - target_core_pscsi reports "scsi_device_get() failed for H:C:T:L" - and the low-level driver's module can no longer be unloaded. Only a reboot recovers. It shows with any changer that reports its drives' ids; with the mhvtl virtual library (IBM 3573-TL personality), each create and remove of a library with four drives leaves four references behind, counted by the module's use count in lsmod. With ch not bound the count is unchanged, and with this patch applied it is unchanged too. Drop the reference as soon as the name has been printed, and remove the now unused dt[] array. That also removes the array leaked when ch_probe() fails after ch_readconfig(). The same leak was reported with an RFC patch in 2022, which was not merged.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-98990

    In the Linux kernel, the following vulnerability has been resolved: namespace: check a submount for references right before unmounting it shrink_submounts() and mark_mounts_for_expiry() first collect all the mounts they are allowed to unmount and then unmount them. Whether a mount is busy is decided by propagate_mount_busy() on the tree. But unmounting the first mount changes the tree that the second one propagates into. propagate_umount() moves a surviving overmount off a copy it unmounts and mounts it where the copy was mounted. If that's where the propagated copy of the second victim is looked up the overmount becomes a candidate of the second umount_tree(). It's childless and so trim_one() commits it without looking at its reference count. So a synchronous umount pulls out a busy mount that is in use somewhere else and marks it MNT_SYNC_UMOUNT while it has users: umount2(/tmp/plshrink/p1, 0) = 0 errno 0 cwd is (unreachable) The same two umounts requested one after the other fail with EBUSY. This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts inherit the flag. Check each mount right before it is unmounted under the same hold of namespace_sem and mount_lock as the umount itself. Make sure that the algorithm stays linear.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-98967

    In the Linux kernel, the following vulnerability has been resolved: cxgb4/ch_ktls: disable softirqs around tid_list erases chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path using xa_insert_bh(). The array is shared by the adapter's connections and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray lock without disabling softirqs. When cleanup runs with softirqs enabled, a receive softirq for another connection on the same CPU can interrupt the erase and spin on the lock held by the interrupted task. Use xa_erase_bh() at both sites to match the insertion path.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-98924

    In the Linux kernel, the following vulnerability has been resolved: fs: avoid repeated scans in evict_inodes() We observed hung tasks when users attempted to unmount a filesystem after its disk had been removed while still in use. During device removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount. Each time evict_inodes() drops s_inode_list_lock to reschedule, it restarts the walk from the head of s_inodes. With many referenced inodes at the head of the list, these restarts repeatedly scan the same inodes without reclaiming them. This can keep s_umount held for a long time, blocking concurrent umount attempts and triggering hung-task reports. Keep the current inode, already marked I_FREEING, out of the disposal batch until s_inode_list_lock is reacquired. Resume the walk from this inode and dispose of it in a later batch or at the end of the walk. The zero-refcount and state checks under i_lock allow this walker to claim the inode by setting I_FREEING and removing it from the LRU. Other reclaimers skip the inode, leaving this walker responsible for eviction. Only evict() removes it from s_inodes, so keeping it out of the disposal batch ensures that it remains on the list while the lock is dropped. After reacquiring the lock, reading its current next pointer accounts for concurrent removal of following inodes. The existing inode lifetime rules prohibit acquiring a reference to an inode marked I_FREEING or I_WILL_FREE. __iget() requires its caller to hold i_lock and establish that taking a reference is valid. Inode lookup and igrab() check these flags under i_lock when acquiring a reference from zero. ihold() requires an existing reference, which would keep i_count nonzero and prevent this walker from claiming the inode. These rules already allow iput_final() and the inode shrinker to release i_lock after setting I_FREEING and before eviction completes. A temporary __iget() reference would also keep the inode on the list, but its release must preserve last-reference handling. Another user can acquire a reference, update lazy timestamps and drop its reference while the pin is held. If the pin becomes the last reference, dropping it with atomic_dec_and_test() and evicting directly bypasses iput()'s lazytime handling and can lose those timestamp updates. Releasing the pin with iput() preserves that handling, but does not guarantee eviction. fs_bdev_mark_dead() runs with SB_ACTIVE set, so iput() may retain the inode in cache, whereas evict_inodes() must evict eligible zero-reference inodes. The inode may also have been freed when iput() returns, so the walker cannot then use it to force eviction. Using I_FREEING preserves the existing eviction behavior without introducing an additional last-reference transition. The xfstests auto group passed on ext4 and XFS with known unrelated failures excluded. No new issues were observed, and the previously reproducible hung task no longer occurs with this patch.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99043

    In the Linux kernel, the following vulnerability has been resolved: ice: fix metadata_dst refcount handling on representor teardown ice_eswitch_release_repr() uses metadata_dst_free() to release the representor's metadata_dst. metadata_dst_free() directly frees the underlying memory without checking the dst_entry refcount. When ice_eswitch_port_start_xmit() processes a packet, it takes a reference via dst_hold() and attaches the metadata_dst to the skb. If the representor is torn down while packets are still queued on the lower device (e.g. in a qdisc), the metadata_dst is freed while references are still held. Use dst_release() instead, which correctly decrements the refcount and only frees the object when all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. Other drivers sharing this pattern (nfp, airoha, bnxt) already use dst_release() for their metadata_dst lifecycle.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99063

    In the Linux kernel, the following vulnerability has been resolved: dm ioctl: don't let data_start run past the buffer struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99067

    In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99061

    In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P device removal race in brcmf_detach() When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and freed. The second list_del_rcu() of wdev->list faults on LIST_POISON2: brcmfmac: brcmf_p2p_del_vif delete P2P vif brcmfmac: brcmf_p2p_deinit_discovery enter brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared brcmfmac: brcmf_detach Enter brcmfmac: brcmf_bus_change_state 1 -> 0 brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed [1.5 s later, brcmf_p2p_del_vif() timed out] brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed Unable to handle kernel paging request at virtual address dead000000000122 Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] Call trace: _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] cfg80211_unregister_wdev+0x10/0x1c [cfg80211] brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac] brcmf_remove_interface+0x1f4/0x254 [brcmfmac] brcmf_detach+0x88/0x180 [brcmfmac] brcmf_sdio_remove+0x90/0x7b0 [brcmfmac] brcmf_sdiod_remove+0x20/0xa0 [brcmfmac] brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac] sdio_bus_remove+0x38/0x144 device_release_driver_internal+0x1e8/0x2c0 device_release_driver+0x14/0x20 brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac] brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac] __exit_compat+0x18/0x418 [brcmfmac_cyw] __arm64_sys_delete_module+0x1ac/0x244 The log was taken with debug=0x406 on an i.MX 8M Plus board with a CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same in mainline. To reproduce: 1. Start wpa_supplicant on wlan0 and let it associate. It creates the P2P device (iw dev shows "type P2P-device"). 2. Stop wpa_supplicant and remove the driver without waiting for wpa_supplicant to exit: kill $(pidof wpa_supplicant) rmmod brcmfmac_cyw brcmfmac The crash is reproducible on that board. For the interface without a netdev (the P2P device), take RTNL and the wiphy mutex in brcmf_detach() before reading iflist, and remove it with locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev any more. The interfaces with a netdev are removed as before, because brcmf_del_if() takes RTNL on its own for the primary interface.

    Denial of service OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99052

    In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99038

    In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99039

    In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99031

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: avoid recursive multicast port cleanup br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99034

    In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-sprd: disable runtime PM on remove sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does not perform the corresponding runtime PM cleanup. The probe failure path disables runtime PM before disabling the clocks, but the normal remove path directly disables clocks that are also managed by the runtime PM callbacks. If the device is runtime suspended, those clocks may already be disabled. Resume the device before removal, disable runtime PM and drop the temporary runtime PM reference before disabling the clocks. This issue was found by manual code inspection.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99035

    In the Linux kernel, the following vulnerability has been resolved: mmc: mtk-sd: Cancel request timeout work on remove The driver queues req_timeout while a request is active. msdc_request_done() uses cancel_delayed_work(), which does not wait for a timeout callback that has already started. The timeout callback calls mmc_request_done(), which wakes the request waiter, and then continues to use host->dev_comp and check the SDIO IRQ. During unbind, msdc_drv_remove() can return and the managed mmc_host can be freed before the callback finishes. KASAN reported use-after-free accesses in msdc_request_done() and msdc_recheck_sdio_irq() in each of three unbind tests. The same tests completed without a kernel diagnostic after this change. Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new requests and before the driver releases the host resources.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99037

    In the Linux kernel, the following vulnerability has been resolved: dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99022

    In the Linux kernel, the following vulnerability has been resolved: regulator: ltc3676: don't read the write-only HRST and CLIRQ registers HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST triggers a hard reset of the chip and writing CLIRQ clears the interrupt; reading them returns nothing useful, and the read itself fires the command. The result is that a plain register dump resets the board: cat /sys/kernel/debug/regmap/2-003c/registers walks every readable register, hits HRST, and the board reboots. Split the callback back in two so HRST and CLIRQ stay writable but are no longer readable. The readable range is left unchanged (LTC3676_BUCK1 ... LTC3676_IRQSTAT).

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99024

    In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99025

    In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix soft lockup in the netlink flow dump A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all.

    Denial of service Network gear

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99015

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99007

    In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99008

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99009

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99010

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: free the skb when the DLC has no owner rfcomm_recv_data() hands the skb to d->data_ready() and returns 0 without freeing it, so the callback owns the skb from that point on. The tty implementation frees it when the DLC has been detached from its device: static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) { struct rfcomm_dev *dev = dlc->owner; if (!dev) { kfree_skb(skb); return; } The socket implementation returns without freeing it, and the skb is leaked. A connected DLC can have no owner: rfcomm_sock_destruct() clears d->owner, while the DLC itself stays on the session until it is closed. Data frames that arrive in that window still find d->state == BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one leaked skb each. The leak does not stop on its own either. The remote runs out of credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only place that sets it is rfcomm_sk_data_ready() itself, below the return. rfcomm_process_dlcs() keeps granting credits, so the remote keeps sending and the leak keeps growing. Free the skb, as the tty side does.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-98992

    In the Linux kernel, the following vulnerability has been resolved: namespace: don't copy an unmounted mount tree may_copy_tree() accepts a mount whose root is an nsfs or pidfs file before it checks whether that mount is mounted. This exception exists for nsfs and pidfs mounts. They are part of no mount namespace so neither check_mnt() nor is_mounted() would let them through and bind-mounting a nsfsfd or a pidfd wouldn't work. Problem is that exception also admits a bind mount of such a file when it was lazily unmounted and is only kept alive by a file descriptor: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --rbind /proc/self/fd/3 /tmp/y With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted mount. It copies every mount that stayed attached to it as well. So if you have a bunch of overmounts over the nsfsfd or the pidfd the whole unmounted stack is copied. That's a bug. So refuse to walk an unmounted tree. Copying its root alone stays possible. So a bind mount of a namespace that is gone can still be recreated from a file descriptor on the old one. The file descriptor pins that mount and its root and __has_locked_children() only reads the direct children which don't leave the parent's list without namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL and are still walked. Copying an unmounted tree recursively fails with EINVAL.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-98984

    In the Linux kernel, the following vulnerability has been resolved: dcache: don't put a mountpoint on a dentry that's being removed rmdir(), unlink() and rename() call dont_mount() on the victim and then detach_mounts() with the victim's inode locked. do_lock_mount() takes the inode lock of the mountpoint and checks cant_mount() so a mount can't show up after detach_mounts(). But attach_recursive_mnt() makes a second mountpoint for the root of the source mount so that the mounts already located at the destination can be put on top of it. No inode is locked for that one and d_set_mounted() only refuses a dentry that is unlinked. Between detach_mounts() and d_delete() the victim is still hashed: rmrace: b passed dont_mount() and detach_mounts(), sleeping T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 () T1: rmdir(/tmp/plcant/d/b) = 0 errno 0 109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw 108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw A bind mount of the directory that's being removed is moved beneath an existing mount while the rmdir() is located between the two calls. The mount ends up on the removed directory and nothing will ever detach it. Check cant_mount() in d_set_mounted() as well. dont_mount() raises the flag under d_lock before detach_mounts() runs so either the mountpoint is set first and detach_mounts() finds the mount or the flag is seen and the mount is refused.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-98985

    In the Linux kernel, the following vulnerability has been resolved: namespace: check the mounts before reading their parents in pivot_root() path_pivot_root() reads the parents of new_root and of the caller's root and checks whether they are shared before it checks that either mount is in the caller's mount namespace. Only namespace_sem is held. That's fine for a mount that is in the caller's mount namespace. But new_root can be a file descriptor to a mount that has been unmounted and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted nothing pins the parent for it. The final mntput() of the parent unhooks the children under mount_lock alone and frees the parent afterwards: pivot_root() close(fd), last ref on the parent ------------ --------------------------------- ex_parent = new_mnt->mnt_parent mntput_no_expire_slowpath() __umount_mnt(new_mnt) cleanup_mnt() call_rcu() IS_MNT_SHARED(ex_parent) BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840 Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157 path_pivot_root+0xf1a/0x1840 __x64_sys_pivot_root+0x165/0x190 The same goes for the caller's root via chroot(). Both outcomes of the check end in EINVAL so nothing but the read itself goes wrong. It's the same thing commit bb4609405752 ("statmount: read the parent of an unmounted mount under mount_lock") fixed for statmount(). Check that both mounts are in the caller's namespace before their parents are read. Every path returns EINVAL either way.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-98933

    In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-98936

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed

CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.