CVE-20XX-?
agent?

No fix yet.

CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.

7,557 CVEs · updated 2026-11-21 06:31 UTC

Reset all
  1. CVE-2026-99160

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99146

    In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99134

    In the Linux kernel, the following vulnerability has been resolved: mac802154: fix data race and NULL deref on local->assoc_dev local->assoc_dev is shared between the association path and the association-response worker without common synchronization. mac802154_perform_association() stores the coordinator pointer and waits for a response. Its timeout and error paths clear the pointer and return to mac802154_associate(), which may then free the coordinator object. Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit and enter mac802154_process_association_resp(), which dereferences assoc_dev. The worker's bit test and the handler's pointer dereference are not atomic with respect to cleanup. Cleanup can clear assoc_dev between them, causing a NULL dereference, or free the coordinator while the response handler still uses the pointer. The recorded result is exposed to the same window. assoc_status and assoc_addr are written by the handler but read by the association path while the associating bit is still set, so a second response for the same request - a malicious one, for instance - can replace them between those reads and leave the caller with an incoherent status and address pair. The response handler only needs the coordinator extended address. Replace assoc_dev with a cached address, removing the pointer lifetime dependency. Protect the cached address and the associating bit with a dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee an atomic __le64 access on all 32-bit architectures. wpan_dev->association_lock cannot be reused here: nl802154_associate() holds it across rdev_associate(), hence for the whole of mac802154_perform_association() including the wait for the response. A response handler taking that lock would only get it once the association has already given up. Reset the completion, publish the cached address, and set the associating bit while holding the lock. The response handler takes the lock, rechecks the bit and the cached address, records the response, clears the bit, and only then completes the waiter. Thus cleanup cannot pass the handler between its state check and completion, and the cached 64-bit value cannot tear. The handler clears the bit before completing, not the woken waiter: otherwise complete() is issued under the lock and a second (e.g. malicious) response can reacquire it before the waiter and replace the result. So a wait that returns success implies the bit is already clear, and the success and negative-response paths return directly. The transmit-error and timeout paths still clear it under assoc_lock, which serializes any racing response against the cleanup while the call returns the error it already selected. Both paths snapshot assoc_status and assoc_addr under the same lock. Both users run in process context, so a plain spinlock is sufficient. The lock is not held while waiting for the completion.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-99130

    In the Linux kernel, the following vulnerability has been resolved: io_uring/cancel: don't spin on local work the task can't run io_uring_cancel_generic() refuses to sleep while any ring on the exiting task's tctx has local work pending. It assumes the task is that ring's submitter and that the next io_uring_try_cancel_requests() pass will run the work. This does not hold for a ring that was still IORING_SETUP_R_DISABLED when the task got its tctx node from io_uring_create() or io_ringfd_register(). The submitter is set later by IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To the exiting task the work stays pending forever, the loop never reaches schedule(), and the task trips the WARN_ON_ONCE() once and then spins in do_exit(). An unprivileged user can set this up at will by creating a disabled ring, having a child enable it and stop, posting to the ring with IORING_OP_MSG_RING and exiting with a request in flight that only the child can complete. The exiting thread burns a CPU until the child runs or dies, and with panic_on_warn set the WARN panics the kernel. Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the task to run the work. This is reasonable since work it cannot run cannot complete any of its requests either, so nothing is lost by sleeping. Drop the WARN_ON_ONCE() since handing a disabled ring to another thread is a supported scenario, not a bug state.

    Denial of service OS & kernel

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-99105

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-99211

    In the Linux kernel, the following vulnerability has been resolved: netlink: reset skb headers before unicast and multicast filtering Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to an skb's network and MAC headers. Netlink producers may reserve headroom without resetting those headers, allowing a receiving socket's filter to read data before the initialized message. For example, IWPM HELLO replies are allocated with dev_alloc_skb(), which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can attach a classic socket filter and disclose this headroom through the length of the delivered reply. The resets in netlink_dump() do not help because IWPM sends a separately allocated skb through netlink_unicast(). Reset both headers before running the receiver's filter in unicast and broadcast delivery, as is already done for dump skbs. This also covers other netlink producers that reserve headroom without changing their allocation or message-building code.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-99183

    In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when looking up a scheduler sched_to_core() walks rdev->cores[] up to rdev->num_cores, and rocket_remove() decrements num_cores for every core it removes. Unbind a core that is not the last one and the cores behind it fall outside the search, so sched_to_core() returns NULL for a core that is still bound and still running jobs. Neither caller checks the result: rocket_job_run(): rocket_fence_create(core), core->dev rocket_job_timedout(): dev_err(core->dev, "NPU job timed out") Unbinding the middle core of the three on an RK3588 while three clients are submitting to all of them faults twice, once from the surviving core's job queue and once from its reset work: KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched] pc : rocket_job_run+0x234/0x838 [rocket] Call trace: rocket_job_run+0x234/0x838 [rocket] drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched] process_one_work+0x640/0x14f0 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched] pc : rocket_job_timedout+0xf0/0x1e0 [rocket] Call trace: rocket_job_timedout+0xf0/0x1e0 [rocket] drm_sched_job_timedout+0x188/0x6a0 [gpu_sched] Both are the third core: the workqueue names are its device and its core->index, and it was left at slot 2 while num_cores had dropped to 2. Search all the slots that were allocated, the way find_core_for_dev() now does. A core that is still bound is then found, and the two callers get the pointer they already assume they have. This does not make unbinding one core out of several safe. An open client keeps an entity pointing at the scheduler of the core that went away: drm_sched reports it as not ready for every job that lands on it, and the client waits in dma_fence_default_wait for a fence that will never signal. Stopping the NULL dereference is what belongs in a fix; the rest wants more thought.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-99184

    In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when a core is removed rocket_remove() decrements rdev->num_cores for each core it removes, while find_core_for_dev() searches slots 0 to num_cores - 1. Unbinding the cores in the order they were bound therefore loses the last one: by the time it is removed the search range has already shrunk past its slot, so find_core_for_dev() returns -1 and rocket_remove() gives up without doing anything. num_cores never reaches zero, rocket_device_fini() never runs, and the file-scoped rdev keeps pointing at a device that is going away. Binding the cores again starts from that stale count, because rocket_probe() takes rdev->num_cores as the slot to fill. On an RK3588, which describes three cores, the second round lands on slots 1, 2 and 3 while rdev->cores was allocated with room for three: rocket fdab0000.npu: Rockchip NPU core 1 version: 1179210309 rocket fdac0000.npu: Rockchip NPU core 2 version: 1179210309 rocket fdad0000.npu: Rockchip NPU core 3 version: 1179210309 The write to rdev->cores[3] is past the end of the array. Nothing in tree reads the core array often enough to notice, so the overrun is silent today. It turned up while testing a devfreq series on top of this, where a worker walks every core a few times a second, and UBSAN caught the first bool it read out of the overrun entry: UBSAN: invalid-load in drivers/accel/rocket/rocket_devfreq.c:47:10 load of value 5 is not a valid value for type '_Bool' Workqueue: devfreq_wq devfreq_monitor Record how many slots were allocated and search all of them. Every core is then found on removal, num_cores reaches zero, the device is torn down and a later bind starts from a clean rdev. This does not make unbinding a single core out of several work. probe still takes num_cores as the slot to fill, so rebinding one core while its siblings stay bound would write over a slot that is already in use, and rocket_open() still reaches for cores[0] whether or not anything is there. Both of those want more thought than a fix should carry. Found by unbinding and rebinding all three cores on an Orange Pi 5 Plus. With this applied, 25 unbind/rebind rounds and 5 module unload/reload rounds run clean there: the cores land in slots 0, 1 and 2 every time, whichever order they are bound in, and the shared supply goes back to a single user after each round.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-99137

    In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_file() returns null, cifs_file_flush will return 0 without issuing set_file_size, and the outer 'if (!rc)' block will set i_size to 0 before telling the server to truncate. If the cifs_open() then fails, the inode will have size 0, while the server file is unchanged. Move the netfs_resize_file() and cifs_setsize() into the 'if (cfile)', so they only run after a successful set_file_size. In the no-handle else branch, evict stale pages with truncate_inode_pages before the O_TRUNC open to dispose of old cache pages, and let the open response set the i_size.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-99111

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix data corruption with concurrent writes and O_TRUNC cifs_do_truncate() flushes dirty pages with filemap_write_and_wait() and truncates the file on the server, but in the old code both operations ran without holding i_rwsem or invalidate_lock. A concurrent buffered write via netfs_perform_write() -- which only needs i_rwsem shared -- could dirty new pages after the flush but before the local truncation, and those pages would be silently discarded by cifs_setsize() -> truncate_pagecache(). Fix by acquiring inode_lock (exclusive i_rwsem) and filemap_invalidate_lock at the top of cifs_do_truncate(), so the entire flush-truncate-resize sequence is atomic with respect to: - buffered writes (blocked by exclusive i_rwsem, since netfs_start_io_write takes i_rwsem shared), - read page faults (blocked by exclusive invalidate_lock, since filemap_fault takes it shared), - writeback collection (blocked by netfs_wb_begin/netfs_wb_end around the server truncate and local resize, since netfs_writepages also acquires the wb lock).

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-99145

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't transfer shrinker pages for pinned bos on purgeable state change Pinned bos have their pages removed from the shrinker's shrinkable / purgeable counts on pin, and added back on unpin according to the bo's purgeable state at that time. However, xe_bo_set_purgeable_shrinker() unconditionally transfers pages between the shrinkable and purgeable counts. If the purgeable state of a pinned bo changes, for example by userspace madvising DONTNEED on a VMA of a bo that is also pinned as a scanout buffer, this underflows one count and, after unpin, leaves the other one permanently inflated. Only update the purgeable flag for pinned bos, and leave the page accounting to unpin. (cherry picked from commit afe6bc012034123fd838328668e609bf57e46bd3)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-99119

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: actually validate userq BOs This was supposed to loop over the individual evicted list, as the kernel and always_valid evicted lists were already handled in amdgpu_vm_validate. Without this, BOs that were created and evicted before a userq was made would never end up in an eviction fence rearm. Also add the missing ref to the BO before drm_exec locks and refs it. (cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99108

    In the Linux kernel, the following vulnerability has been resolved: ntfs: fix FITRIM range alignment ntfs_trim_fs() aligns the start of a free extent up to the device discard granularity, but derives the discard length by aligning the original extent length down. When the free extent start is not discard-aligned, adding that length to the aligned start can extend the discard past the free extent and into allocated clusters. For example, with 4 KiB clusters and 32 KiB discard granularity, the free extent [4 KiB, 36 KiB) becomes the discard range [32 KiB, 64 KiB), so 28 KiB beyond the free extent may be discarded. Align the absolute end of the free extent down and derive the length from the two aligned endpoints. Skip extents that contain no full discard unit. Reproduced with a 4 KiB-cluster NTFS filesystem on scsi_debug configured for 32 KiB discard granularity and read-zero-after-trim. Before this change, FITRIM zeroed seven allocated 4 KiB clusters following an unaligned 32 KiB hole. With this change, the same data remains intact across FITRIM and remount.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99215

    In the Linux kernel, the following vulnerability has been resolved: power: supply: core: prevent unregistering a power supply while a callback runs Once a power supply is registered, its callbacks can immediately start firing from other contexts, such as external_power_changed() triggered by the TCPM stack. If a power supply is unregistered while the callback is still running, the driver data can already be freed when the callback tries to access it, leading to a use-after-free. This happens e.g. when the hardware bus carrying the power supply device malfunctions (e.g. I2C is hogged down by another malfunctioning device) immediately after the power supply is registered, and thus the core is still processing the callbacks which were queued up when the driver starts the removal, leading in some cases to a kernel crash, e.g.: [ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005 [ 11.646751] Mem abort info: [ 11.647006] ESR = 0x0000000096000004 [ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits [ 11.647806] SET = 0, FnV = 0 [ 11.648077] EA = 0, S1PTW = 0 [ 11.648356] FSC = 0x04: level 0 translation fault [ 11.648785] Data abort info: [ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0 [ 11.650390] [0000000000000005] user address but active_mm is swapper [ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP [ 11.651460] Modules linked in: [ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT [ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT) [ 11.653024] Workqueue: events power_supply_changed_work [ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100 [ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8 [ 11.655098] sp : ffff80008192bb30 [ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000 [ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28 [ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62 [ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000 [ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000 [ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590 [ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0 [ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000 [ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000 [ 11.661878] Call trace: [ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P) [ 11.662596] __power_supply_am_i_supplied+0x40/0xb8 [ 11.663040] psy_for_each_psy_cb+0x20/0x40 [ 11.663416] class_for_each_device+0x110/0x150 [ 11.663825] power_supply_am_i_supplied+0x68/0x100 [ 11.664262] bq257xx_external_power_changed+0x58/0x140 [ 11.664733] __power_supply_changed_work+0x60/0x80 [ 11.665170] psy_for_each_psy_cb+0x20/0x40 [ 11.665545] class_for_each_device+0x110/0x150 [ 11.665953] power_supply_changed_work+0x98/0x1b8 [ 11.666382] process_one_work+0x164/0x4c0 [ 11.666758] worker_thread+0x19c/0x320 [ 11.667104] kthread+0x138/0x150 [ 11.667408] ret_from_fork+0x10/0x20 [ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34) [ 11.668294] ---[ end trace 0000000000000000 ]--- Add a read-write semaphore between external_power_changed() and power_supply_unregister() to prevent the latter from returning (and thus the driver from freeing its data) while the callback is still running.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99214

    In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Move packet RAM enable to PM runtime Audio can be triggered by the HPD handler and start up before video has been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe. vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the infoframe, however, if the video hasn't been enabled, vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes, causing the following splat: [ 201.570266] ------------[ cut here ]------------ [ 201.570293] Packet RAM has to be on to store the packet. [ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606 [...] [ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 201.758499] Call trace: [ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P) [ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4] [ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper] [ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper] [ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4] [ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper] [ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec] [ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core] [ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core] [ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core] [ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm] [ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm] [ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm] [ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm] [ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm] [ 201.846802] __arm64_sys_ioctl+0x88/0xd8 [ 201.850769] invoke_syscall+0x48/0xf4 [ 201.854470] el0_svc_common+0x80/0xd8 [ 201.858171] do_el0_svc+0x1c/0x28 [ 201.861520] el0_svc+0x3c/0xb0 [ 201.864605] el0t_64_sync_handler+0x68/0xdc [ 201.868834] el0t_64_sync+0x198/0x19c [ 201.872536] ---[ end trace 0000000000000000 ]--- Considering that Packet RAM enable is essentially a power management configuration, move its enabling/disabling to the Runtime PM hooks. Note that post_crtc_disable() still stops all infoframes, but keeps Packet RAM enabled, leaving it to be disabled by runtime suspend.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99186

    In the Linux kernel, the following vulnerability has been resolved: x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx() Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made for_each_insn_prefix() declare its own loop counter named idx. get_seg_reg_override_idx() keeps its result in a local of the same name, so the assignments in the loop body now write the loop counter: - the function always returns INAT_SEG_REG_DEFAULT, so FS and GS overrides are ignored; - a CS override sets the counter to INAT_SEG_REG_CS (2), the increment makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again, so the loop never terminates. The UMIP emulation reaches this from the #GP handler for user space: an SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task spinning in the kernel, never returning to user space, with a SIGKILL that is never delivered. Any user can thus tie up CPUs until reboot. With an FS or GS prefix, the emulated result is written to the wrong address. Rename the internal macro iterator variable. [ Lukas' original patch renamed the use site, I changed it to rename the iterator in the macro instead, but left Lukas' commit message and authorship - Linus ]

    Denial of service OS & kernel

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-99188

    In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac1000: clear the RGMII status interrupt Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again, and the pending status storms the line: dwmac_dma_interrupt: unexpected status 04000000 A register dump at the first message on ODROID-HC4 showed it: core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d When the resume thread runs on the CPU that takes the MAC interrupt, the storm starves it: a soft lockup, then a watchdog reset or a hang. Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not masked, as the driver did before 2e2c878a3141; the read clears it. Wake-on-LAN resume from s2idle with the resume thread and the MAC interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of 3 resumes without a fix and in 0 of 10 with this patch; it ran with an out-of-tree dwmac-rk change that keeps the GMAC powered across suspend. ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume.

    Denial of service OS & kernel

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99168

    In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: Check per-CPU register page before mmap Register-page setup is optional for each CPU. If allocation or registration fails, mshv_vtl_configure_reg_page() warns and leaves that CPU's reg_page NULL, but initial context setup continues successfully. Meanwhile, successful setup on another CPU sets the global mshv_has_reg_page flag. mshv_vtl_fault() checks this global flag before selecting the requested CPU's register page. With mixed setup results across online CPUs, the check passes even for a CPU with no register page, reaching get_page(NULL) when userspace faults in that mapping. Check the selected per-CPU register page before taking its reference and return VM_FAULT_SIGBUS if it is absent.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99162

    In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99151

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both use ASSERT(stream->sink) before dereferencing stream->sink->link. ASSERT is compiled out in production builds, so a NULL stream->sink causes a NULL pointer dereference. link_set_dpms_off() already guards two earlier accesses to stream->sink with explicit NULL checks, confirming that stream->sink can legitimately be NULL. The subsequent call to deallocate_usb4_bandwidth() had no equivalent guard. Replace the ASSERT() calls with proper NULL checks that return false early, and add a matching stream->sink guard at the call site in link_set_dpms_off() consistent with the surrounding pattern. v2: Keep the existing ASSERT() calls for diagnostics (to report unexpected NULL sink), and add explicit NULL checks that return false before dereferencing stream->sink. Also add a matching stream->sink guard at the deallocation call site in link_set_dpms_off(). (Alex) (cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99141

    In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash in print_graph_function_event() tracing_set_tracer() assigns the flags of the newly selected tracer with: tr->current_trace_flags = t->flags ? : t->tracer->flags; If the new tracer defines neither static flags nor default flags, like hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy for it, and both operands are NULL, so tr->current_trace_flags ends up being NULL as well. The ring buffer is not cleared when switching tracers: it is reset inside tracer_init(), after current_trace_flags was already assigned. If the buffer still holds function_graph entries of the previous tracer, printing one of them dereferences the NULL pointer. This was hit by cat trace during an ftrace stress test: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode RIP: 0010:print_graph_function_event+0xe/0x20 Call Trace: s_show+0x4d/0x110 seq_read_iter+0x2d4/0x490 seq_read+0x130/0x170 vfs_read+0xb5/0x370 ksys_read+0x6d/0xe0 do_syscall_64+0xbc/0x450 The snapshot buffer is not reset at all, so this can be reproduced without a race: echo function_graph > /sys/kernel/tracing/current_tracer echo 1 > /sys/kernel/tracing/snapshot echo hwlat > /sys/kernel/tracing/current_tracer cat /sys/kernel/tracing/snapshot Rather than teaching every user of tr->current_trace_flags about this corner case, make sure it is never NULL: when the newly selected tracer has no flags at all, tracing_set_tracer() falls back to a static empty no_tracer_flags. run_tracer_selftest() can hit the same case, so the same fallback is added there too. The existing users already handle opts == NULL, so these tracers keep behaving as before.

    Denial of service OS & kernel

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99144

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue A deferred reenqueue can read a freed user DSQ. The request stays on its CPU's deferred list until run_deferred() takes it, and the RCU callback that frees the DSQ assumes that the grace period has flushed it, so exit_dsq() checks the per-CPU node without the deferred list lock. A grace period waits for readers in flight, not for a pending run_deferred(). A run_deferred() which starts after the grace period began can detach the request right before the callback looks and then read the freed DSQ's id. Cancel the pending requests before the grace period instead. The irq work that frees the DSQ unlinks every CPU's request under the per-CPU deferred list lock, and schedule_dsq_reenq() ignores a new request under the same lock once the id is invalid. Only a run_deferred() that started before the grace period can hold a request, and it runs with IRQs disabled, so the grace period waits for it and nothing touches the DSQ after the callback.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99149

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns -ENOMEM right away and skips the cleanup every other error path goes through. The GEM object, the bo->parent reference on the VM root and the MMU notifier registration are all left behind. Use release_object here, not user_pages_done, range is still NULL at this point. (cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99125

    In the Linux kernel, the following vulnerability has been resolved: s390/pai: Handle multiple PMU stop callback invocations Handle the following scenario: The kernel protects itself against a very high sampling load and throttles the sampling using: perf_event_throttle() --> PMU->stop() Shortly later the scheduler may terminate the task and removes it from the CPU. It again calls PMU->stop() which results in two invocations of PMU->stop() called back to back. Protect against this and check the PERF_HES_STOPPED bit on function entry. If it is already set return. Clear bit PERF_HES_STOPPED in PMU->start(). Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event. It sets perf_event::event_limit to a positive value and causes perf_event_overflow() to invoke pai_stop() call back function when perf_event::event_limit hits zero. This is not supported because the sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out of a task. Use list_for_each_entry_safe() for safe iteration over syswide_list in pai_have_samples().

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99129

    In the Linux kernel, the following vulnerability has been resolved: selinux: fix BPF token permission checks Avoid multiple lookups of the bpffs creator SID using the token's file descriptor when the same information can be found via the resolved path/dentry (in selinux_bpf_token_create()) or the token itself (in selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does this simplify the code, it avoids potential TOCTOU issues if the user changes the token file descriptor passed into the kernel.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99101

    In the Linux kernel, the following vulnerability has been resolved: ntfs: move attribute payload before shrinking its record ntfs_new_attr_flags() resizes the non-resident attribute record before moving its name and mapping pairs to their shorter-header offsets when compression or sparse state is cleared. Shrinking the record first moves the following attribute over the tail of the old record. The subsequent memmove() therefore copies bytes from that following attribute instead of the old mapping pairs. Re-enabling compression on an empty file persists those bytes as a malformed mapping pairs array, which ntfsck reports as a missing or invalid run length. Move the payload before shrinking the record, while retaining the existing resize-before-move ordering when growing it.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99102

    In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_setattr_size() ntfs_setattr_size() updates i_size and resizes the on-disk attribute without holding mapping->invalidate_lock. Page faults take the lock shared, so a fault racing the resize can resolve a VCN against the transient runlist state of ntfs_non_resident_attr_expand() and fail with a spurious SIGBUS, and can interleave with the size-change epilogue (truncate_pagecache(), i_size_write(), pagecache_isize_extended()). Take invalidate_lock exclusively around the whole resize after inode_dio_wait(), matching the fallocate path and other filesystems such as xfs, which wraps truncate in its mmaplock (= invalidate_lock).

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99208

    In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Zero OA buffer at allocation ttm_bo_type_kernel BOs are not guaranteed to be zeroed on allocation and may contain data from previously freed pages. Since the OA buffer is mmap'able by userspace, this can expose stale kernel memory contents. Streams opened with DRM_XE_OA_PROPERTY_OA_DISABLED allocate the OA buffer without calling xe_oa_init_oa_buffer(). Zero the buffer at allocation to prevent information disclosure through mmap. The existing zeroing in xe_oa_init_oa_buffer() remains necessary for zero report-id/timestamp detection on enable/re-enable. (cherry picked from commit 126c4c5388f9311a390b9b254a835b0cf0f55331)

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99209

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: skip eviction of a BO with no resource xe_evict_flags() switches on tbo->resource->mem_type to choose an eviction placement. An xe BO can reach eviction with no ttm.resource, e.g. an imported dma-buf BO whose resource was freed during teardown while its attachment is still live: the exporter then invalidates it via xe_dma_buf_move_notify() -> xe_bo_evict(), and the switch dereferences a NULL resource and faults. A BO with no resource has nothing placed or mapped, so there is nothing to evict. Return an empty placement (num_placement = 0), mirroring the handling already used for non-xe scatter-gather BOs just above; ttm_bo_validate() then takes the pipeline-gutting path and returns 0. Without the fix the xe_dma_buf@xe_test_dmabuf_move_notify_no_resource dynamic live selftest will fail with below stack. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:xe_evict_flags+0xf4/0x140 [xe] Call Trace: <TASK> xe_bo_evict+0x40/0xa0 [xe] ? ttm_bo_pipeline_gutting+0x71/0x180 [ttm] xe_test_dmabuf_move_notify_no_resource+0x182/0x440 [xe] xe_dma_buf_kunit+0x387/0x580 [xe] v2: Add Fixes tag and failure info in commit text (Matt Brost) (cherry picked from commit dbcfaac6331f1fcb0c2fe3ad3e9adb1e5d43ec0c)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99210

    In the Linux kernel, the following vulnerability has been resolved: accel/rocket: clear rdev on device init failure rocket_probe() stores the return value from rocket_device_init() in the file-scoped rdev pointer before checking whether it is an error pointer. If rocket_device_init() fails, rdev is left as an ERR_PTR. The rdev pointer is also used as the marker for whether the shared rocket device has already been initialized. A later core probe can therefore see a non-NULL rdev, skip rocket_device_init(), and dereference the error pointer when reading rdev->num_cores. Save the error code and clear rdev before returning from the rocket_device_init() failure path.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99207

    In the Linux kernel, the following vulnerability has been resolved: scsi: target: Disable interrupts while holding delayed_cmd_lock target_do_delayed_work() takes dev->delayed_cmd_lock with a plain spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled while the lock is held. Every other acquisition of that lock uses spin_lock_irqsave(): target_handle_task_attr() and transport_complete_ordered_sync() in target_core_transport.c, and target_non_ordered_release() in target_core_device.c. That was safe while every caller of transport_complete_task_attr() ran in process context: target_complete_ok_work() from target_completion_wq, transport_complete_qf() from dev->qf_work_queue, and transport_generic_request_failure() from the submit and execute paths. Since commit 06933066d88a ("scsi: target: Add support for completing commands from backend context") that is no longer true. With complete_type=1 on a fabric that sets direct_compl_supp, target_complete() runs target_complete_ok_work() inline in the backend's completion context, which target_complete_cmd_with_sense() documents as "May be called from interrupt context". For iblock that is the bio end_io. target_complete_ok_work() starts with transport_complete_task_attr(), which takes delayed_cmd_lock in two ways: - Every ORDERED command is put on dev->delayed_cmd_list by target_handle_task_attr() and dispatched from there by target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its completion therefore goes through transport_complete_ordered_sync(). - A SIMPLE command that completes while an ORDERED command is pending drops the last reference to the killed dev->non_ordered, and percpu_ref_put() then runs target_non_ordered_release() in the completing context. Both take the lock and, if commands are waiting, call schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq, i.e. on the CPU that took the completion. Further completions for the same queue are typically delivered there too, so one arriving while the work holds the lock spins on it forever. Reaching this needs complete_type=1, which is not the default (vhost-scsi, the only fabric with direct_compl_supp, defaults to TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt context, and ORDERED commands from the initiator. Linux virtio_scsi guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path; any guest that uses the ORDERED task attribute, which vhost-scsi accepts, does. target_do_delayed_work() is a work item and always runs in process context, so spin_lock_irq() is sufficient. Found by inspection; no runtime report. A single ORDERED command goes through both acquisitions, so with CONFIG_PROVE_LOCKING the first one completed through direct completion should produce an inconsistent lock state report on delayed_cmd_lock (hardirq or softirq, depending on where the backend completes).

    Other OS & kernel

    unscored 0.1% exploit odds No fix listed
  32. CVE-2026-99199

    In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: hip04_eth: Move setting of netops to fix crash hip04_mac_probe() calls of_phy_connect() before ndev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash").

    Denial of service OS & kernel

    unscored 0.1% exploit odds No fix listed
  33. CVE-2026-99200

    In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: hisi_femac: Move setting of netops to fix crash hisi_femac_drv_probe() connects the PHY before dev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. phy_link_topo_add_phy from phy_attach_direct+0xec/0x37c of_phy_get_and_connect from hisi_femac_drv_probe+0x1f4/0x558 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash").

    Denial of service OS & kernel

    unscored 0.1% exploit odds No fix listed
  34. CVE-2026-99205

    In the Linux kernel, the following vulnerability has been resolved: sched/core: Call wakeup_preempt() for queued tasks during class change Paul reported recent RCU changes exposed a lost resched where CPU idles with a rcutorture thread waiting while being completely runnable. Dumping the rq state at the time of idling with runnable tasks showed the following: rq->next_class = &fair_sched_class rq->nr_running = 1 rq->cfs.h_nr_queued = 0 rq->rt.rt_nr_running = 1 Although the waiting task was an RT task, "rq->next_class" did not point to rt_sched_class and was stuck at the lower priority fair_sched_class. Inspecting sched_change_end() revealed the following race with __sched_setscheduler() for queued, but non-running tasks: CPU0 CPU1 ==== ==== __schedule() /* * rq->donor is a fair task that blocks. * rq->next_class = &fair_sched_class */ rq_lock(rq0) pick_next_task() /* nr_running = 0 */ pick_task_fair() sched_balance_newidle() raw_spin_rq_unlock(rq0) rq_lock(rq0) activate_task(rq0, p) /* p is a fair task */ rq0->nr_running++; rq0->cfs.h_nr_queued++; wakeup_preempt(rq, p) rq->next_class = &fair_sched_class resched_curr() rq_unlock(rq0) __sched_setscheduler(p) /* p is moved to SCHED_RR */ task_rq_lock(p) sched_change_begin() rq0->cfs.h_nr_queued--; rq0->rt.rt_nr_running++; sched_change_end() /* * p->on_rq = 1 (ctx->queued) * but p is not rq->donor * (!ctx->running) hence * resched_curr() is and * rq->next_class upgrade is * skipped. */ task_rq_unlock() raw_spin_rq_lock(rq0) /* * rq->nr_running = 1 * rq->cfs.h_nr_queued = 0 * rq->rt.rt_nr_running = 1 * rq->next_class = &fair_sched_class */ if (rq->cfs.h_nr_queued && ...) /* Above is false */ if (rq_modified_above(this_rq, &fair_sched_class)) /* Also false since rq->next_class is still fair */ /* * sched_balance_newidle() is considered to * have failed to pull any fair tasks and no * other wakeups were detected. */ return NULL; /* pick_task_fair() */ pick_task_idle() return rq->idle; next = rq->idle; /* Preemption indicators are lost */ clear_tsk_need_resched(prev); clear_preempt_need_resched(); rq->curr = rq->idle; !!! rq->idle switches in with rq->running == 1 but !need_resched() !!! In simple words, enqueue, followed by a class change of the newly queued task goes unnoticed in rq->next_class indicator and sched_balance_newidle() sees no fair task, nor any higher priority task enqueued. The above sequence will lead to CPU idling with a runnable task on the CPU. Call wakeup_preempt() for ctx->queued cases in sched_change_end() to re-evaluate rq->next_class after class change (ENQUEUE_CLASS) and set the NEED_RESCHED indicator accordingly. Newidle balance will correctly see an enqueue of a higher priority t ---truncated---

    Other OS & kernel

    unscored 0.1% exploit odds No fix listed
  35. CVE-2026-99193

    In the Linux kernel, the following vulnerability has been resolved: net: ti: icssm-prueth: Move setting of netops to fix crash icssm_prueth_netdev_init() calls of_phy_get_and_connect() before ndev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash").

    Denial of service OS & kernel

    unscored 0.1% exploit odds No fix listed
  36. CVE-2026-99194

    In the Linux kernel, the following vulnerability has been resolved: net: ethernet: aeroflex: move setting of netops to fix crash greth_of_probe() calls greth_mdio_init(), which connects the PHY, before dev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash").

    Denial of service OS & kernel

    unscored 0.1% exploit odds No fix listed
  37. CVE-2026-99195

    In the Linux kernel, the following vulnerability has been resolved: net: ethoc: move setting of netops to fix crash ethoc_probe() calls ethoc_mdio_probe(), which connects the PHY, before netdev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash").

    Denial of service OS & kernel

    unscored 0.1% exploit odds No fix listed
  38. CVE-2026-99197

    In the Linux kernel, the following vulnerability has been resolved: net: mv643xx: move setting of netops to fix crash mv643xx_eth_probe() connects the PHY before dev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash").

    Denial of service OS & kernel

    unscored 0.1% exploit odds No fix listed
  39. CVE-2026-99100

    In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengths The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-116596

    Pyrus Sync for Windows contains a local privilege escalation vulnerability caused by missing authorization controls in its PyrusSyncService Windows service, which allow an attacker with unprivileged access to create files using the ISyncService contract.

    Auth & access OS & kernel

    unscored 0.1% exploit odds No fix listed
  41. CVE-2026-99098

    In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix buffer overflow in inline mode with large tag size In inline mode, dm_integrity_check and dm_integrity_inline_recheck compute the checksum of each block into an on-stack buffer of HASH_MAX_DIGESTSIZE bytes. integrity_sector_checksum pads its result with zeroes up to the tag size, so if the tag size is larger than HASH_MAX_DIGESTSIZE, the padding runs past the end of the buffer. With CONFIG_STACKPROTECTOR the kernel panics in dm_integrity_check on the first read. Enlarge both buffers to hold MAX_TAG_SIZE bytes, as commit b93b6643e9b5 ("dm integrity: fix a crash with unusually large tag size") did for integrity_metadata. Note that this is not a security bug because the buffer overflow can only be triggered by root.

    Memory safety OS & kernel

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99088

    In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: <TASK> set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800

    Other Network gear

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99089

    In the Linux kernel, the following vulnerability has been resolved: ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM The probe function puts the device into the runtime PM active state with only the "iis" bus clock enabled, but it also sets priv->op_clk to the parent of the RCLK_SRC mux without enabling it. The runtime PM suspend callback disables both clocks, so the first runtime suspend after probe disables op_clk once more than it was enabled. On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate, so this triggers the following warning during boot: WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45 i2s_bus already disabled ... Workqueue: pm pm_runtime_work Call trace: ... clk_core_disable from clk_disable+0x28/0x34 clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298 genpd_runtime_suspend from __rpm_callback+0x48/0x18c __rpm_callback from rpm_callback+0x4c/0x50 rpm_callback from rpm_suspend+0xf4/0x718 rpm_suspend from pm_runtime_work+0x9c/0xa0 ... Fix this by enabling op_clk in probe right after getting it, so the clock state matches the runtime PM active state, and by disabling it in remove.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99095

    In the Linux kernel, the following vulnerability has been resolved: drm/vc4: drain the hangcheck timer and works on V3D unbind Nothing stops the hangcheck timer that submitted jobs arm, or the job_done_work that the render-done interrupt queues, at teardown: vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy() runs from the drm-managed release, after vc4_v3d_unbind() has already uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed by then reads V3D registers through the NULL vc4->v3d pointer, and the late callbacks run on the vc4_dev embedding them after it has been freed. Drain them in vc4_v3d_unbind(): shut the timer down and cancel reset_work before the interrupt is taken down, because its vc4_irq_reset() re-enables it, then flush job_done_work so that completions queued at teardown still release their jobs. This issue was found by an in-house static analysis tool.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99091

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99092

    In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map().

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99097

    In the Linux kernel, the following vulnerability has been resolved: tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper() tee_dyn_shm_alloc_helper() derives nr_pages from a caller-supplied size and passes it to alloc_pages_exact() without checking it. For size == 0 nr_pages is 0, and alloc_pages_exact(0) calls get_order(0), which is documented as undefined and returns BITS_PER_LONG - PAGE_SHIFT. The page allocator then trips its order > MAX_PAGE_ORDER warning and fails the allocation; on a panic_on_warn kernel that ends the boot. This can be triggered by TEE_IOC_SHM_ALLOC with struct tee_ioctl_shm_alloc_data where size is 0. Reject a zero page count, as register_shm_helper() already does for the register path.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99090

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934)

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99093

    In the Linux kernel, the following vulnerability has been resolved: mm: don't schedule deferred kernel page table freeing while booting Booting with a boot-time function tracer and a filter, for example ftrace=function ftrace_filter=pud_free_pmd_page panics on 7.3-rc4 as soon as the tracer starts: [ 23.531178] Starting tracer 'function' [ 23.675800] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN NOPTI [ 23.819917] KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] [ 23.964025] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.3.0-rc4-fe2ec83746e5-with-fixes-v2+ #195 PREEMPT(undef) [ 24.252248] RIP: 0010:__queue_work+0xab/0xf00 [ 25.981629] Call Trace: [ 26.125727] <TASK> [ 26.413912] ? pagetable_free_kernel+0x20/0x120 [ 26.990283] queue_work_on+0x97/0xf0 [ 27.134382] __cpa_collapse_large_pages+0x501/0x6f0 [ 27.566662] cpa_flush+0x394/0x620 [ 27.998953] change_page_attr_set_clr+0x321/0x4a0 [ 29.151729] set_memory_rox+0xa2/0xf0 [ 29.584018] create_trampoline+0x431/0x6f0 ... [ 44.343347] Kernel panic - not syncing: Attempted to kill the idle task! The boot-time tracer is started from early_trace_init(), which runs before workqueue_init_early(). Making its trampoline read-only splits a large page, and CPA collapses it again right away. The split table has been a kernel page table since commit 9e4a3ec3411b ("x86/mm/pat: Allocate split page tables as kernel page tables"), so the collapse frees it through pagetable_free_kernel(), which queues work on system_percpu_wq - still NULL at that point. That commit is correct in itself; it only lets CPA reach pagetable_free_kernel() before the workqueue that function relies on exists. Keep putting the table on the list, but don't schedule the work while the system is still booting. A core_initcall schedules it once to free whatever was queued by then.

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-99096

    In the Linux kernel, the following vulnerability has been resolved: io_uring/register: don't exempt disabled rings from task restrictions A ring created with IORING_SETUP_R_DISABLED is exempt from its register restrictions until it is enabled. This lets the creator register the restrictions and then enable the ring with IORING_REGISTER_ENABLE_RINGS, whether or not that opcode is in the allowed set. Since commit ed82f35b926b ("io_uring: allow registration of per-task restrictions"), a ring also inherits restrictions from the task that creates it, and the same exemption applies to those. A task whose register opcodes are restricted can therefore create a disabled ring, issue any register opcode on it, and then enable it. Mark rings whose restrictions were inherited from the task, and keep checking register opcodes for them while the ring is disabled. Enabling such a ring now requires IORING_REGISTER_ENABLE_RINGS to be in the task's allowed set. Per-ring restrictions registered on a disabled ring work as before. [axboe: amend with inheritance flag fixup]

    Other OS & kernel

    unscored 0.2% exploit odds No fix listed

CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.