No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-99554
In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: do not advance rx_skb->data on dropped frames For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive header by advancing pegasus->rx_skb->data in place. This is done before the pkt_len > PEGASUS_MTU check, and when that check drops the frame the good path resubmits the same skb with the advanced rx_skb->data as the transfer buffer, still PEGASUS_MTU bytes long. Every frame with an oversized length field therefore moves the receive buffer two more bytes towards the end of the skb data area. A device that keeps sending such frames makes the host controller write received data over skb_shared_info and past the end of the allocation, and the corrupted skb_shared_info is used when the skb is eventually freed. With an emulated device sending frames filled with 0x5a on a KASAN kernel: BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd] Write of size 1536 at addr ffff888105821202 by task swapper/1/0 ... Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67] RIP: 0010:skb_release_data+0x36f/0x800 Only skip the header with skb_reserve() once the frame is going to be passed up, so the receive buffer always starts at the beginning of the skb data area. Unlike the old pointer adjustment, skb_reserve() also moves skb->tail, so the two header bytes now count against the buffer size: lower the length limit for the 0x8513 accordingly, otherwise a pkt_len of PEGASUS_MTU - 1 or PEGASUS_MTU would trip skb_over_panic(). Found by code review with LLM assistance and reproduced with an emulated USB device (raw-gadget + dummy_hcd).
-
CVE-2026-99555
In the Linux kernel, the following vulnerability has been resolved: media: usbtv: fix null-pointer dereference on disconnect A null-pointer dereference can occur in usb_make_path() when called from usbtv_querycap() (and other ioctl handlers) during device disconnection. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] RIP: 0010:usb_make_path include/linux/usb.h:985 [inline] RIP: 0010:usbtv_querycap+0x9c/0x100 drivers/media/usb/usbtv/usbtv-video.c:612 ... Call Trace: <TASK> v4l_querycap+0x236/0x470 drivers/media/v4l2-core/v4l2-ioctl.c:1106 __video_do_ioctl+0x8af/0xc70 drivers/media/v4l2-core/v4l2-ioctl.c:3133 video_usercopy+0x860/0x1430 drivers/media/v4l2-core/v4l2-ioctl.c:3475 v4l2_ioctl+0x18d/0x1e0 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 This happens due to a race condition between the USB device disconnect routine (usbtv_disconnect()) and V4L2 ioctls. When the device is disconnected, usbtv_disconnect() sets usbtv->udev = NULL without holding the usbtv->v4l2_lock mutex. Concurrently, an ioctl handler like usbtv_querycap() can be executing under the v4l2_lock and attempt to use usbtv->udev, leading to a crash. To fix this, move the usbtv->udev = NULL assignment into usbtv_video_free() and protect it with mutex_lock(&usbtv->v4l2_lock). This ensures that no non-queue ioctl handler can run concurrently with the pointer being nullified. If an ioctl is already running, the mutex will block the disconnect path until the ioctl finishes. If an ioctl is blocked waiting for the lock, it will acquire it after the disconnect routine releases it, but will then check video_is_registered() (which was cleared by vb2_video_unregister_device()) and safely return -ENODEV. Acquiring v4l2_lock after vb2_video_unregister_device() avoids reintroducing a historical deadlock issue, and usbtv_audio_free() remains safe as it is called before usbtv_video_free().
-
CVE-2026-99543
In the Linux kernel, the following vulnerability has been resolved: backlight: qcom-wled: Fix NULL pointer dereference in wled_remove() wled_probe() doesn't set the driver data for the platform device. As a result, platform_get_drvdata() in wled_remove() will return NULL, and the first dereference of it crashes on unbind. Set the platform device driver data in wled_probe().
-
CVE-2026-99544
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Bounds check the shared ring buffer indices In a CoCo VM the host is untrusted. Since the VMBus ring buffer read and write indices live in shared memory, the guest has to treat both as potentially malicious. hv_ringbuffer_write() copies into the ring at write_index with no bounds checking, so the host can make the guest write packet data at any offset up to 4 GiB past the start of the ring buffer. read_index matters too: the available space derived from both indices is the only bound on how much is copied, and an out-of-range index can make it far larger than the ring. The fix is to validate both indices before use and to use the validated snapshot instead of re-accessing. For invalid indices, hv_ringbuffer_write() logs and returns -EIO. One re-read of write_index is left unchecked in this patch: hv_get_ring_bufferindices() fetches it again for the prev_indices trailer. The value is only returned to the host and is not used as an offset or length for indexing. Since this is not a security issue, it is addressed later in the series. Open-coding the bytes available arithmetic keeps the fix free of prerequisites; a later patch refactors it into a helper function.
-
CVE-2026-99545
In the Linux kernel, the following vulnerability has been resolved: driver core: take parent lock on deferred probe USB interfaces should be probed with the parent USB device lock held, but this is not honoured when probe is deferred. Add a new bus_probe_device_deferred() helper to handle deferred probe where the parent device lock is not held.
-
CVE-2026-99546
In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: avoid stale mask references after delete Flower releases a mask reference when a filter is removed from the classifier. The filter object can remain alive while dump, walk, or hardware reoffload paths hold a reference to it. Those paths can then dereference f->mask after the mask has already been released. Keep the mask reference until the filter reference count reaches zero. Release the mask synchronously from the final __fl_put() while the caller still holds the tcf_proto reference, and leave the existing RCU work to free the mask. This keeps the mask available to every reader that still holds the filter. The filter is still removed from the classifier indexes immediately. Therefore, a deleted filter can temporarily retain an otherwise empty mask; fl_delete() uses the handle IDR, rather than the mask list, to determine whether the classifier has become empty. Failed mask assignment can leave fnew->mask as an error or borrowed pointer without an owned mask reference. Clear it before the common failure path so the final put cannot release an unowned reference. This fix does not add fields, snapshots, or per-filter memory.
-
CVE-2026-99547
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not RPM complete unrelated subtrees on unplug When a Thunderbolt device is unplugged, that switch and every switch subsequent to it on the bus device list is `complete()`d, not just its child devices. In the case of multiple domains, it may cause, eg, an attempt to `complete()` the uninitialized domain 1 root switch RPM completion on unplug of a switch from domain 0 (though ordering is not guaranteed numerically sorted). I initially noticed this issue on a Dell XPS9720 when the system would seem to sporadically not wake after unplugging a Thunderbolt dock. I tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if that resolved the issue, but the issue persisted. Eventually I found that I could consistently generate a kernel Oops reporting a page fault at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I ultimately ended up changing. To confirm this issue, I did an eBPF trace of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while unplugging in a variety of situations and found that an unplug from domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM completion is not initialized and thus is holding a null wait-list pointer, triggering the page fault. Here are the key sections of that eBPF trace. Note that HEAD denotes the completion's own wait-list HEAD: ``` RESCAN_ENTER domain=0 COMPLETE rescan_domain=0 target=0-1 target_domain=0 route=0x1 parent=0-0 unplugged=1 COMPLETION done=0 head=HEAD next=HEAD prev=HEAD BUS_WALK domain=0 start=0-1 callback=complete_rpm CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1 COMPLETE rescan_domain=0 target=1-0 target_domain=1 route=0x0 parent=domain1 unplugged=0 COMPLETION done=0 head=HEAD next=0 prev=0 complete+5 complete_rpm+43 bus_for_each_dev+133 icm_free_unplugged_children+250 icm_rescan_work+42 ``` This patch gates the `complete()` on an additional condition - that the Thunderbolt domain matches the domain of the device that was unplugged. I only have a single system with multiple Thunderbolt domains - the Dell XPS9720. I am consistently able to reproduce the Oops on that system. Since running with this patch, I have not seen the Oops reoccur. I have also tested it on a Thinkpad X1-Gen12, and that system boots and runs well with it, but it only has a single Thunderbolt domain, so it does not exercise the multi-domain failure case.
-
CVE-2026-99422
In the Linux kernel, the following vulnerability has been resolved: ovl: use the pinned upper dir in ovl_fix_origin() Renames made directly on the upper filesystem during a lookup crash the kernel. A dentry that is passed to vfs_setxattr() must be pinned. ovl_fix_origin() passes upper->d_parent to ovl_set_impure() without a reference, and the lookup holds no lock of the upper directory. A rename on the upper filesystem changes d_parent, and only the child pins the new parent, so a second rename and an rmdir free it. With delays in ovl_fix_origin() and ovl_set_impure(), renaming the upper directory twice and removing the intermediate parent during the lookup of a merge directory without an origin xattr gave a KASAN use-after-free in vfs_setxattr(). Fix this by passing the upper dentry that the overlay parent holds. [amir: add helper ovl_set_impure_dir()]
-
CVE-2026-99414
In the Linux kernel, the following vulnerability has been resolved: ovl: skip copy up of empty security.capability ovl_copy_xattr() gives up if it can't read an attribute that listxattr() has named. An empty security.capability, which anybody has been able to store on any file for a long time, is such a case: it is listed, and getxattr() has nothing to return for it. A file in a lower layer that carries one can't be copied up: it can't be written to, renamed or have its mode changed. There is nothing to copy if there are no data. Go on with the next one. [amir: treat -EINVAL as no capability too, and do the same in ovl_copy_up_meta_inode_data()]
-
CVE-2026-99415
In the Linux kernel, the following vulnerability has been resolved: ovl: set the revalidate flags after d_instantiate() stat() of a file on an overlayfs mount triggers a kernel warning and fails with ECHILD if another task is creating that file at the same time. This happens on an overlay with a FUSE upper layer, which is the layer where overlayfs creates new files. Write access to a directory on such an overlay is all a user needs to run the two tasks. The revalidate flags are DCACHE_OP_REVALIDATE and DCACHE_OP_WEAK_REVALIDATE. They tell path walk to call ->d_revalidate() or ->d_weak_revalidate() on a dentry, so that the filesystem can check that the cached dentry is still valid. An overlay dentry only has one of these flags if a dentry in one of its layers has it. FUSE dentries have the first one. When a flag is set on an overlay dentry, path walk calls ovl_dentry_revalidate_common(). That function only expects a dentry without an inode in RCU walk, while the dentry is being destroyed. For such a dentry outside of RCU walk, it hits a WARN_ON() and returns -ECHILD. So a negative overlay dentry must never have the flags set. ovl_instantiate() breaks this rule. When a task creates a file, the overlay dentry for the new name is hashed but still negative. ovl_instantiate() then works in this order: - It copies the flags from the new upper dentry to the overlay dentry. - It calls ovl_get_inode(), which can sleep in a getxattr request to the FUSE server. - Only then does it call d_instantiate(). A second task that looks up the name between the first step and the last finds a negative dentry with the flags set and revalidates it. Reproduced with a FUSE server that delays its getxattr reply: stat() of a name that was being created hit the WARN_ON() and failed with ECHILD. Fix this by setting the flags after d_instantiate().
-
CVE-2026-99416
In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.
-
CVE-2026-99420
In the Linux kernel, the following vulnerability has been resolved: ovl: check that the parents of volatile/dirty are dirs An unprivileged user crashes the kernel by mounting overlayfs with the volatile option. A dentry that serves as the parent of a lookup must be a directory. ovl_create_volatile_dirty() walks work/incompat/volatile/dirty by name, and ovl_lookup_or_create() returns an existing entry whatever its type. A file or a symlink that another task creates during the mount becomes the parent of the next lookup, which calls a NULL ->lookup. An unprivileged user mounted overlayfs with "volatile" in a user namespace while a second process created a symlink named work/incompat, and the mount task oopsed on a NULL ->lookup call. Fix this by returning -ENOTDIR from ovl_lookup_or_create() when the caller asked for a directory and the existing entry is a non-dir.
-
CVE-2026-99421
In the Linux kernel, the following vulnerability has been resolved: ovl: always encode the origin fh when index is enabled On an overlay with index=on,nfs_export=on, copy up of a directory crashes the kernel once an LSM has started to deny CAP_DAC_READ_SEARCH to the mounter, the task that mounted the overlay. The mount and the LSM policy change require root. After that, any user who can write to a directory that exists only in a lower layer triggers the oops by doing so. Before a file or directory that exists only in a lower layer is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. On copy up, ovl_get_origin_fh() encodes the file handle of the lower inode, called the origin. It returns NULL if ovl_can_decode_fh() says that the lower filesystem cannot decode handles. Whether the callers can handle NULL depends on the index option: - Without an index, NULL is fine: the callers store an empty origin xattr. - With index enabled, overlayfs keeps entries for copied up inodes in an internal index directory. The name of an index entry is derived from the handle, so ovl_get_origin_fh() must return a handle or an error. The mount only enables the index if ovl_can_decode_fh() succeeds for all layers, but the result can change later. The function checks the export operations of the filesystem and capable(CAP_DAC_READ_SEARCH). Copy up runs with the mounter's credentials, and an LSM can start to deny the capability to those credentials after the mount. ovl_get_origin_fh() then returns NULL with index enabled. This goes wrong in two callers: - With nfs_export=on, copy up of a directory creates an index entry for the directory. ovl_create_index() passes the NULL handle to ovl_get_index_name_fh(), which dereferences it. - If the result changes while mount(2) is still running, ovl_get_indexdir() passes a NULL from ovl_get_origin_fh() to ovl_verify_set_fh() in the same way. Before the commit in the Fixes tag, these two callers encoded the handle themselves, without consulting ovl_can_decode_fh(). Reproduced with a BPF LSM program that started to deny the capability after the mount. An unprivileged touch in a directory that had not been copied up yet oopsed in ovl_get_index_name_fh(). With this patch the touch succeeds and the directory gets its index entry. Fix this by calling ovl_can_decode_fh() in ovl_get_origin_fh() only when index is disabled.
-
CVE-2026-99407
In the Linux kernel, the following vulnerability has been resolved: xfs: don't repair fs summary counters with garbage LOLLM noticed that if we scan the filesystem and come up with totally garbage numbers for the summary counters, we don't actually mark the scan incomplete. Because we don't do this, repair can install the garbage values into the filesystem, making things worse. Don't do that.
-
CVE-2026-99408
In the Linux kernel, the following vulnerability has been resolved: xfs: don't proceed with xattr repair if the live update fails LOLLM observes that we ought to make one last check for failed live updates before replacing the xattr structure. Let's be cautious here.
-
CVE-2026-99409
In the Linux kernel, the following vulnerability has been resolved: xfs: don't fix the directory tree if live update fails LOLLM complains that we don't double-check dl->aborted one last time to before committing repairs to the filesystem. This is important because the live update handler could have set ->aborted if it encountered a runtime error.
-
CVE-2026-99410
In the Linux kernel, the following vulnerability has been resolved: xfs: always reset incore attr fork buffer when resetting fork LOLLM noticed that the local format attr fork verifier depends on if_bytes being set correctly. However, the fork reset function doesn't reset that correctly, which can cause post-repair verifier failures. Fix that.
-
CVE-2026-99533
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate AppInstanceId takeover target AppInstanceId lookup currently selects the first open with the matching identifier. CREATE for an unrelated share or path can therefore force-close another session's open before authorization of the new target. Matching only the base path also conflates alternate data streams with the unnamed stream. MS-SMB2 requires the old open to match the share and path, belong to a different ClientGuid, and be closed only when the requester has GENERIC_READ access. Search all opens with the ID and match share, resolved path, stream, and the current connection's client GUID. Retain a share configuration reference in ksmbd_file and reuse its name instead of allocating a name for every open. This keeps matching safe during tree connection teardown and preserves name-based matching across configuration updates. Refresh the share reference on durable reconnect and restore the old reference if reopening fails. Serialize connection and share comparisons with durable disconnect/reconnect, and recheck the target before closing it. Keep the original ClientGuid for durable replay and lease checks. Check AppInstanceVersion before querying access, even when GENERIC_READ is absent, and before disconnected delete-on-close cleanup. Rejected CREATE must leave other durable opens untouched. Calculate maximal access on the matched open's referenced path so a rename cannot substitute another file's authorization. Require read access with the effective VFS credentials as well as the NT DACL before takeover. Access denial only skips takeover and leaves CREATE to its normal access checks. Restore filesystem credentials before returning a takeover error. Handle takeover before checking FILE_CREATE collisions, and re-resolve the path after closing the old open. This lets delete-on-close remove the old file before a new one is created. Include SYNCHRONIZE in the baseline maximal-access mask so read-only files report GENERIC_READ correctly.
-
CVE-2026-99524
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a local reenq node left on an inactive cpu A local DSQ reenq is queued on the rq through a per-sched node and run from deferred work. When the reenq is requested from dispatch, the work is a balance callback queued once dispatch is done. A cpu going down installs balance push early in its teardown, and queue_balance_callback() refuses new callbacks from then on. ops.dispatch() keeps running on that cpu until the rq goes offline after an RCU grace period, so a reenq it requests in that window may never run. The IMMED handling in dispatch_one() requests one the same way. A reenq requested from elsewhere for a cpu that is already offline goes through irq_work_queue_on(), which warns, and its work doesn't run until the cpu comes back. Either way the node stays on the rq's list. When the scheduler is freed, scx_sched_free_rcu_work() warns and frees the pcpu with the node still linked, and the list is walked again once the cpu comes back. An inactive cpu's local DSQ holds only tasks that are bound to it or are being moved off, so the reenq is pointless. Ignore reenqs of an inactive cpu's local DSQ. The test is lockless. The hotplug thread of a cpu going down runs on that cpu, and it marks the cpu inactive before it installs balance push. A dispatch on the cpu runs to completion before that thread can run there, so a dispatch that saw the cpu active has queued its callback by then. Requests from outside dispatch run from the wakeup path or through irq_work, which balance push doesn't affect. The grace period after the cpu goes inactive waits for any requester that saw it active, so that irq_work is queued while the cpu is online.
-
CVE-2026-99518
In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix use-after-free unregistering kbd_led led kbd_led_update_all() registers asus->kbd_led with devm_led_classdev_register() on the platform device, but kbd_led is embedded in struct asus_wmi, which asus_wmi_remove() frees at its end. The driver core calls .remove() before devres_release_all(), so the deferred devres release runs led_classdev_unregister() on memory that has already been freed. Whether that faults depends on whether the slab has been reused in between, which makes the crash on module unload intermittent and silently corrupts the led classdev state in the remaining runs. Unregister the led classdev explicitly in asus_wmi_led_exit(), after the led workqueue has been destroyed: kbd_led_work can then neither run nor be queued anymore, since asus_ref.asus is NULL too, so kbd_led_registered is stable and the classdev can be released while the memory embedding it is still alive. devm_led_classdev_unregister() also drops the devres entry, leaving nothing to run at unbind cleanup time; it warns when no devres entry exists, hence the kbd_led_registered check.
-
CVE-2026-99519
In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix use-after-free of perf domain in netlink doit handlers The doit handlers dropped em_pd_list_mutex before dereferencing the perf domain, so a concurrent device unregister could free it while the reply was being built. Encode the reply from em_perf_domain_for_id() callbacks, which run under the mutex, and allocate the skb outside of it, like the dumpit path already does. This issue was found by an in-house static analysis tool.
-
CVE-2026-99523
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Fix DMABUF use-after-free during ufile cleanup The DMABUF release can race with ufile cleanup. When the cleanup holds hw_destroy_rwsem for write, uverbs_uobject_release() fails its trylock and leaves the uobject on the ufile list, but the dma_buf is freed as soon as the release returns. The cleanup then destroys the uobject and uses the freed dma_buf: BUG: KASAN: slab-use-after-free in uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 Read of size 8 at addr ff11000109cf14b0 by task repro/435 Call Trace: uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 destroy_hw_fd_uobject+0x3f/0x50 uverbs_destroy_uobject+0xc5/0x380 __uverbs_cleanup_ufile+0x1a8/0x260 uverbs_destroy_ufile_hw+0x54/0x160 ib_uverbs_close+0x34/0x110 Allocated by task 435: dma_buf_export+0x1b5/0x530 ib_uverbs_handler_UVERBS_METHOD_DMABUF_ALLOC+0x223/0x3f0 Freed by task 436: kfree+0x301/0x530 dentry_kill+0x14c/0x560 __fput+0x23a/0x4a0 rdma_user_mmap_entry_remove() dereferences the same pointer. Protect the stored dma_buf pointer with a mutex and clear it before release returns. Use a shared revoke helper so uobject destruction and mmap entry removal both skip a cleared pointer. Hold a temporary uobject reference across uverbs_uobject_release() and the pointer update. Use a separate mutex because uobject destruction can free the mmap entry before release finishes. Map and unmap use attachment->dmabuf directly, so they do not need to take the new mutex while holding the reservation lock.
-
CVE-2026-99500
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix resource leak in zpci MSI setup If airq_iv_create() fails in __alloc_airq(), the zpci_sbv bit allocated by airq_iv_alloc_bit() is never freed. This permanently leaks one of the ZPCI_NR_DEVICES summary bits, reducing system capacity with each failed device hotplug. In systems with repeated device insertion failures or under memory pressure, all summary bits can be exhausted, preventing new PCI devices from being added until reboot. Add proper error handling to free the zpci_sbv bit and reset zdev->aisb if the AIBV creation fails.
-
CVE-2026-99501
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix MSI directed-mode teardown IRQ bit count On s390 with directed interrupts enabled, zpci_msi_teardown_directed() frees the platform's maximum number of MSI bits (zdev->max_msi) instead of the actual allocated count (zdev->msi_nr_irqs). This corrupts the shared IRQ bitmap used by all PCI functions, causing lost interrupts and heap corruption. Fix zpci_msi_teardown_directed() to only free the actual allocated IRQ bit count.
-
CVE-2026-99502
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup zpci_remove_parent_msi_domain() dereferences zbus->msi_parent_domain unconditionally and does not clear it afterwards. zpci_bus_create_pci_bus() removes the domain when pci_create_root_bus() fails, then zpci_bus_release() removes it again on the last kref_put(), reading ->fwnode from the freed irq_domain and freeing it twice. If zpci_alloc_domain() or zpci_create_parent_msi_domain() fails, no domain is created at all; zbus is kzalloc'd, so the same release path dereferences NULL. Return early when there is no domain, and clear the pointer after removing one.
-
CVE-2026-99495
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix and improve zcrypt reply message verification checks Add or improve checks related to buffer sizes and reply sizes to the handling of replies from the crypto cards for CCA, EP11 (AP message type 6) and ICA (AP type 50) messages. The verification code related to reply field length was not designed well and thus firmware deficiencies could lead to unexpected behavior in the zcrypt device driver. Thus improve the code to more closely inspect especially length fields at message replies. Add length validation before accessing reply message structures in zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and zcrypt_msgtype50_receive() to prevent out-of-bounds reads and potential kernel memory disclosure. Also rework these three functions to validate reply lengths more carefully before copying data back into the request buffer. Use size_t for length calculations, reject inconsistent reply sizes, and add defensive handling for short invalid replies. For XCRB replies, validate both reply segments and derive the effective message length from the covered range instead of trusting only the second segment. Additionally improve some of the later invoked evaluation functions which further check the payload. Add comments about length assumptions and for the type50 processing rework the payload processing completely with removing a misplaced BUG_ON().
-
CVE-2026-99499
In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix use-after-free race in zpci floating interrupt cleanup zpci_clear_irq() stops the adapter from raising new interrupts for the function, but a zpci_floating_irq_handler() already running on another CPU can still be scanning zdev->aibv when zpci_msi_teardown_floating() releases it. Clear the zpci_ibv[] entry so no further handler picks the vector up, then wait for a grace period before releasing it. The handler runs inside the rcu_read_lock() section that do_airq_interrupt() holds across airq->handler(), so synchronize_rcu() drains any handler still in flight. Release the vector and free the summary bit only after the grace period, so neither can be reused while a reader still holds the old pointer. zpci_ibv served both delivery modes, indexed by function under FLOATING and by cpu under DIRECTED. Only the floating vectors are published to and torn down under the interrupt handler, so split the directed vectors out into zpci_dibv and annotate zpci_ibv __rcu, which lets sparse check the accessors above.
-
CVE-2026-99485
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: clear the mailbox channel pointer when starting it fails aie2_create_context() allocates a mailbox channel, starts it, and on a failed start frees it again: hwctx->priv->mbox_chann = xdna_mailbox_alloc_channel(ndev->mbox); ... ret = xdna_mailbox_start_channel(hwctx->priv->mbox_chann, ...); if (ret) goto free_channel; ... free_channel: xdna_mailbox_free_channel(hwctx->priv->mbox_chann); hwctx->priv->mbox_chann keeps pointing at the freed channel. That pointer is the driver's own test for whether a hardware context has a usable channel: aie2_destroy_context() returns early on NULL, aie2_sched_job_run() refuses to run a job on NULL, and the message helpers return -ENODEV on NULL. A stale pointer passes all of them. It matters on the restart path. aie2_hwctx_restart() calls aie2_create_context() again on a hardware context that is already live, after aie2_hwctx_stop() has torn its channel down, and the context survives a failure there: aie2_sched_job_timedout() discards the return value entirely, and aie2_hwctx_resume() only propagates it. What is left is a live hardware context holding a freed channel, and every later user of it takes the non-NULL branch: - the next job submitted reaches xdna_mailbox_send_msg() on the freed channel, via the !mbox_chann guard in aie2_sched_job_run(), - a second command timeout reaches aie2_hwctx_stop() -> aie2_destroy_context(), - closing the device reaches aie2_hwctx_fini() -> aie2_release_resource() -> xrs_release_resource() -> aie2_xrs_unload() -> aie2_destroy_context(), and aie2_destroy_context() then calls xdna_mailbox_stop_channel() followed by xdna_mailbox_free_channel() on memory that was already freed: a use-after-free, and a second free of the same channel. The AIE4 management channel already does this correctly - aie4_mailbox_start() clears ndev->aie.mgmt_chann right after freeing it. Do the same here. The create path itself is not affected: when aie2_xrs_load() fails, xrs_allocate_resource() removes the solver node without calling ->unload, and aie2_hwctx_init() frees hwctx->priv, so the stale pointer never outlives the structure holding it. Starting a channel can fail today without this patch: the ring buffer sizes firmware reports are rejected unless both are powers of two, and request_irq() can fail.
-
CVE-2026-99476
In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().
-
CVE-2026-99478
In the Linux kernel, the following vulnerability has been resolved: filelock: keep superblock active through delegation wait A caller may drop its path after try_break_deleg() returns a delegated inode but before break_deleg_wait() finishes. The extra inode reference held in struct delegated_inode does not keep the superblock active. After a lazy unmount, closing the delegation holder can release the last mount reference and shut down the superblock while another task waits for the delegation break. The waiter's final iput() can then enter the filesystem's eviction code after its superblock-private state was freed. This has been observed as a KASAN use-after-free in shmem_evict_inode(). When try_break_deleg() saves a delegated inode, take an active reference to its superblock while the caller still pins the mount. Keep that reference through break_deleg_wait() and the final iput(), then release it with deactivate_super(). This protects every caller of the helpers, including the mknod, mkdir, symlink and rmdir paths that drop their path before waiting.
-
CVE-2026-99457
In the Linux kernel, the following vulnerability has been resolved: net: sched: prevent scheduling deactivated qdiscs TAPRIO can schedule a deactivated qdisc after some_qdisc_is_busy() has reported it idle. Commit 47e8dbb6e763 ("net/sched: do not reset queues in graft operations") made graft deactivation skip queue reset, leaving TAPRIO's timer armed. A late callback schedules NET_TX softirq work, whose dequeue path can race the unlocked child-queue reset in taprio_reset(). The same skb can be queued for deferred freeing by RTNL and dequeued for transmission. In the reproducer, the TAP reader frees it before __rtnl_unlock() reads its next pointer. KASAN reports a slab-use-after-free in __rtnl_unlock+0xa3/0xd0, with a read of size 8 from the freed skb. Reject deactivated qdiscs in __netif_schedule(). Callers' RCU protection lets the existing grace period join earlier scheduling calls before the busy check. Restart nonempty transmit queues on reactivation so suppressed scheduling does not strand packets.
-
CVE-2026-99458
In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: unlink discarded items before freeing mtd_virt_concat_destroy_items() frees each item without removing it from concat_node_list. list_for_each_entry_safe() protects the current traversal, but concat_node_list still points to the freed items afterward. The function also unwinds errors from mtd_virt_concat_node_create(). A later initialization can traverse a freed item in mtd_is_part_concat(), causing a use-after-free. Unlink each item before freeing it.
-
CVE-2026-99459
In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: detach poll waiter on POLLFREE MSHV_SET_POLL_FILE keeps a poll wait entry after the ioctl returns. A file reference does not always pin the registered waitqueue: signalfd_poll() uses current->sighand->signalfd_wqh, whose lifetime is tied to the task. signalfd_cleanup() sends POLLFREE before the sighand is freed. The MSHV callback currently leaves its entry linked, so __wake_up_pollfree() warns and a later replacement calls remove_wait_queue() through a stale wqh pointer. A source-equivalent KASAN run reproduced: BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave _raw_spin_lock_irqsave remove_wait_queue harness_ioctl [mshv_pollfree_harness] The object belonged to sighand_cache and had been released through slab_free_after_rcu_debug() after __cleanup_sighand(). On POLLFREE, unlink the entry under the provider waitqueue lock. Preserve the existing CPU cancellation before publishing a NULL wqh, since a NULL load lets a racing replacement reuse the persistent poll state. Use a matching acquire load under RCU when removing a normal registration. The callback takes no mutex and does not sleep, so the existing mutex-to-waitqueue-lock order is unchanged. An LLM assisted the source audit, fix development, and validation of this issue.
-
CVE-2026-99564
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: don't wait for RDMA_CM_EVENT_DISCONNECTED in smbdirect_socket_destroy_sync() smbdirect_socket_destroy_sync() waited for RDMA_CM_EVENT_DISCONNECTED after smbdirect_socket_cleanup_work() called rdma_disconnect(). That can take very long, e.g. if the peer just disappeared, until the rdma cm gives up, or forever if the event already happened, but the status was overwritten afterwards. This is not needed: smbdirect_socket_destroy() drains the qp under rdma_lock_handler(), destroys it and calls rdma_destroy_id(), which only waits for a currently running event handler and makes sure no further events are delivered. The rest of the disconnect protocol (DREQ/DREP and timewait for IB, abrupt close for iWarp) is handled by the rdma core asynchronously. drivers/nvme/host/rdma.c also just calls rdma_disconnect() and ib_drain_qp() before rdma_destroy_id(). So smbdirect_socket_destroy() now also accepts SMBDIRECT_SOCKET_DISCONNECTING and changes the status to SMBDIRECT_SOCKET_DISCONNECTED itself under rdma_lock_handler(). We could still get RDMA_CM_EVENT_DISCONNECTED in the small windows between rdma_unlock_handler() and rdma_destroy_id(), but in that case smbdirect_connection_rdma_event_handler() is basically a no-op.
-
CVE-2026-99559
In the Linux kernel, the following vulnerability has been resolved: ARM: 9524/1: mm: align hugetlb mappings to the huge page size mmap(MAP_HUGETLB) on 32-bit Arm can return an address which is not aligned to the huge page size. In a QEMU virt guest, unmapping the VMA then hits the alignment check in __unmap_hugepage_range(): kernel BUG at mm/hugetlb.c:5213! Internal error: Oops - BUG: 0 [#1] SMP ARM PC is at __unmap_hugepage_range+0x540/0x584 LR is at __zap_vma_range+0x13a0/0x1410 Commit 7bd3f1e1a9ae ("mm: make hugetlb mappings go through mm_get_unmapped_area_vmflags") made hugetlb mappings use the architecture's arch_get_unmapped_area(). The generic implementations handle hugetlb alignment, but the Arm implementations only account for the optional SHMLBA cache-colouring constraint. A 4 KiB-page kernel can therefore align the mapping to 4 KiB or 16 KiB instead of the required 2 MiB. Set the alignment mask from the file's hstate for hugetlb mappings in both Arm implementations. Huge-page alignment also satisfies the SHMLBA constraint.
-
CVE-2026-99563
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release failed pending sockets of a listener A child of a listener only left the listen.pending or listen.ready list via smbdirect_socket_accept() or when the listener was destroyed. So every connection that failed before it was accepted (negotiate timeout, peer disconnect, invalid negotiate request, ...) stayed on the list and counted against the backlog until the listener was destroyed. After about backlog (10 for ksmbd) such connections smbdirect_listen_connect_request() rejected every new connection with -EBUSY, so an unauthenticated peer was able to permanently stop ksmbd from accepting SMB-Direct connections. Now a failed child moves itself to a new listen.orphaned list at the end of smbdirect_socket_cleanup_work(), after the disconnect was started, and queues listen.purge_orphaned_work, which releases it with smbdirect_socket_release(), without holding the listener's rdma_lock_handler() lock, in the same way smbdirect_socket_destroy() does for the remaining children. Orphaned sockets still count against the backlog until they are released. sc->accept.listener is now only changed under listener->listen.lock and whoever clears it is responsible for releasing the socket: smbdirect_socket_accept(), purge_orphaned_work or the destroy of the listener. In order to make that work: - a struct smbdirect_socket that is a listener is now freed via kfree_rcu(), so that a child can dereference sc->accept.listener under rcu_read_lock(), even if the listener is released concurrently. - smbdirect_listen_connect_request() adds nsc to the listen.pending list and sets nsc->accept.listener before it calls smbdirect_accept_connect_request(), and always returns 0 so the rdma_cm core keeps the connection id and nsc owns it. On a non-zero return it schedules nsc's teardown with smbdirect_socket_schedule_cleanup(), which orphans it off the listener so that purge_orphaned_work releases it; nsc destroys its own connection id with rdma_destroy_id() in that teardown. The teardown has to be deferred because the rdma_cm core holds nsc's id_priv->handler_mutex across the handler, so nsc->rdma.cm_id must not be destroyed synchronously from here. That same handler_mutex (and the listener's) also guarantees nsc can't go away under us, so setting the listener before the call is safe and lets a failure orphan nsc. - smbdirect_accept_negotiate_recv_work() no longer moves a socket to the ready list if it already failed or no longer belongs to the listener. Every accepting socket has a listener, so if sc->accept.listener is already cleared, it no longer sends a negotiate response, as the socket is about to be released. - smbdirect_socket_destroy() of the listener disables purge_orphaned_work and also releases the orphaned sockets.
-
CVE-2026-99553
In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between client_info_show() and free_client() client_info_show() renders /proc/fs/nfsd/clients/<id>/info and walks clp->cl_sessions under clp->cl_lock to print each session's slot counts. free_client() tears down the same list without taking cl_lock, and is the only unlocked mutator of cl_sessions. A reader can observe a client mid-teardown because get_nfsdfs_clp() pins the nfs4_client but not its sessions: free_client() frees every session before calling nfsd_client_rmdir(), so an in-flight seq_file reader can follow a list_del()'d node whose ->next now holds LIST_POISON1 and take a general protection fault: Oops: general protection fault, probably for non-canonical address 0xdead00000000014c CPU: 1 UID: 0 PID: 132488 Comm: cat RIP: 0010:client_info_show+0x2bf/0x3d0 RAX: dead000000000100 Call Trace: seq_read_iter+0x12a/0x4b0 seq_read+0xf1/0x130 vfs_read+0xbf/0x350 ksys_read+0x6f/0xf0 do_syscall_64+0x8b/0xcb0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Kernel panic - not syncing: Fatal exception Detach cl_sessions onto a local reaplist under cl_lock, then free the sessions after dropping the lock. Removing entries from cl_sessions under cl_lock matches unhash_session(), and the detach-then-reap shape matches how __destroy_client() reaps cl_delegations. The sessions cannot be freed while cl_lock is held, since free_session() calls nfsd4_del_conns(), which re-acquires it.
-
CVE-2026-99411
In the Linux kernel, the following vulnerability has been resolved: xfs: actually lock the metafile reservation when adjusting after repair LOLLM reported that xrep_reset_metafile_resv performs unlocked loads and stores to the metadata file space reservation counters and thus can race with other threads. Fix this by taking the lock.
-
CVE-2026-99412
In the Linux kernel, the following vulnerability has been resolved: xfs: avoid cross-rtgroup reaping after a repair LOLLM notices that the extents stored in a xrtb_bitmap (aka xfs_rtblock bitmap) can span multiple rtgroups due to two circumstances. The first is that the size of an rtgroup is an exact power of two, which means that rtgroups are adjacent in the segmented xfs_rtblock_t address space. This is fairly common to reduce the amount of multiplication and division needed to handle space on the rt volume. The second is that (unlike in the original rtgroups design), rtgroups do not have fixed-location metadata like AGs do, which means that there's nothing to force a break between rtgroups. Therefore, we must loop through the rtgroups in xreap_rtmeta_extent to avoid running off the end of an rtgroup while reaping.
-
CVE-2026-99560
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask mt7925_irq_map sets wm2_complete_mask, but mt7925_dma_layout has no tx done ring, so the MT_RXQ_MCU_WA queue and its NAPI are never set up. On a chip reset, mt7925e_mac_reset() calls napi_disable() on that NAPI and crashes: BUG: kernel NULL pointer dereference, address: 0000000000000a40 Workqueue: mt76 mt7925_mac_reset_work [mt7925_common] RIP: 0010:mutex_lock+0x1c/0x50 Call Trace: napi_disable+0x1d/0x50 mt7925e_mac_reset+0x327/0x420 [mt7925e] mt7925_mac_reset_work+0x9a/0x1a0 [mt7925_common] Remove the WM2 mask from mt7925_irq_map and from MT7925_INT_RX_DONE_ALL.
-
CVE-2026-99562
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle An authenticated client with a writable tree connection can open a directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on a directory FILE_WRITE_DATA is the legitimate add-file right, so the check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the directory file, which has no FMODE_WRITE, and __kernel_write_iter() hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a panic_on_warn kernel. Before commit 25e414db7033 ("ksmbd: report holes in allocated range queries") the dense-file path used vfs_fallocate(), which rejects directories with -EISDIR. The kernel_write() loop that replaced it has no such check. Reject a directory handle in ksmbd_vfs_zero_data() before writing, as ksmbd_vfs_write() already does for SMB2_WRITE. WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: kernel_write+0x1ef/0x4d0 ksmbd_vfs_zero_data+0x413/0x590 smb2_ioctl+0x21fa/0x66a0 handle_ksmbd_work+0x61b/0x1ff0
-
CVE-2026-99558
In the Linux kernel, the following vulnerability has been resolved: blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key() Sashiko reported a possible NULL pointer dereference, triggered by the following flow: dm-inlinecrypt ctor # first use of the fallback ├─ blk_crypto_init_key() # succeeds, ctx->key.size != 0 ├─ blk_crypto_start_using_key() │ ├─ hw-wrapped key: -EOPNOTSUPP │ │ # profile never allocated (NULL) │ └─ raw key: fallback_start_using_mode() │ └─ blk_crypto_fallback_init() fails │ └─ kfree(profile) # not NULLed ├─ goto bad └─ inlinecrypt_dtr() # evicts whenever key.size is set └─ blk_crypto_evict_key() └─ blk_crypto_config_supported_natively() = false └─ blk_crypto_fallback_evict_key() └─ __blk_crypto_evict_key(blk_crypto_fallback_profile) └─ profile->num_slots # BOOM!!! This issue can be reproduced using the following commands: dd if=/dev/zero of=/tmp/backing bs=1M count=64 LOOP=$(losetup -f --show /tmp/backing) SZ=$(blockdev --getsz $LOOP) KEY=$(head -c 64 /dev/urandom | od -An -tx1 | tr -d ' \n') dmsetup create ic --table "0 $SZ inlinecrypt aes-xts-plain64 \ $KEY 0 $LOOP 0 1 keytype:hw-wrapped" And the following oops is triggered: ================================================================== blk-crypto: loop0: no support for wrapped keys Oops: general protection fault, probably for non-canonical address 0xdffffc000000000b: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000058-0x000000000000005f] CPU: 5 UID: 0 PID: 901 Comm: dmsetup 7.3.0-rc3 #1 PREEMPT(lazy) RIP: 0010:__blk_crypto_evict_key+0x2e/0x3b0 Call Trace: blk_crypto_evict_key+0x24c/0x320 inlinecrypt_dtr+0xf6/0x160 inlinecrypt_ctr+0x2d3/0xbd0 dm_table_add_target+0x661/0xf40 table_load+0x1c4/0x490 ctl_ioctl+0x32f/0x5f0 dm_ctl_ioctl+0xe/0x20 ================================================================== dm-inlinecrypt is the only caller that can evict a key that was never started, as fscrypt frees such a key without evicting it. Fix this by returning early from blk_crypto_fallback_evict_key() when tfms_inited[] is not set for the key's mode. tfms_inited[] is only set after blk_crypto_fallback_init() has successfully initialized the profile, so the crash above is no longer reachable. The bug has been latent since commit c984ff1423ae ("blk-crypto: dynamically allocate fallback profile") was merged in v6.5, and only became actually triggerable when commit e7f57d2c47e2 ("dm-inlinecrypt: add target for inline block device encryption") was merged in v7.2.
-
CVE-2026-99536
In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent session binding in compound requests A failed multichannel binding can retain its target session on the work item so that the error response can be signed. Subsequent compound commands can then use that session together with a tree connection left over from an earlier command. Limit binding SESSION_SETUP requests to standalone messages during message validation, before smb2_sess_setup() can replace work->sess. Check both NextCommand and the current request offset to cover binding in the first, middle and last positions of a compound. The existing validation error path returns STATUS_INVALID_PARAMETER and stops processing the remaining commands. This intentionally limits support for compounded binding. It is not a protocol requirement that binding be standalone. Standalone binding and non-binding compounds retain their existing behavior, without changing session, tree or response encryption handling.
-
CVE-2026-128667
A Cross-Site Request Forgery (CSRF) vulnerability in the admin panel of PHPGurukul News Portal Project V4.1 allows remote attackers to hijack the authentication of administrators and perform unauthorized state-changing actions, such as adding, editing, or deleting posts and sub-admins, or changing passwords, via crafted HTTP requests. This occurs because the application fails to implement anti-CSRF tokens for admin actions and permits destructive operations via HTTP GET requests.
-
CVE-2026-128661
PHPGurukul Employee Leaves Management System v2.1 contains an insufficient verification vulnerability in the password recovery functionality in forgot-password.php. The application allows an unauthenticated user to access the password-change workflow by providing a valid employee ID and corresponding email address without requiring an additional out-of-band verification mechanism.
-
CVE-2026-128658
PHPGurukul Beauty Parlour Management System V1.1 uses a non-cryptographic function to generate security-sensitive appointment and invoice identifiers. The identifiers are generated within a restricted numeric range and are subsequently used in record lookup operations. This implementation exposes the application to identifier prediction or guessing attacks under conditions where the identifiers are relied upon as a security boundary.
-
CVE-2026-119673
MongoDB Database Tools mongofiles does not resolve existing parent-directory symlinks when validating output paths for get_regex. An unauthorized user who can both upload a GridFS file and place a symlink in the operator's download working directory can cause a later retrieval to create a file containing unauthorized user-controlled data outside that directory, using the operator process's filesystem permissions. The issue can occur with default traversal and overwrite settings. Exploitation requires an operator to retrieve matching files from the affected working directory; the demonstrated default behavior creates a new file rather than overwriting an existing file. This issue affects MongoDB Database Tools versions 100.2.0 through versions before 100.20.1.
-
CVE-2026-128719
An issue in PHPGurukul Employee Leaves Management System (ELMS) Version 2.1 allows a remote attacker to escalate privileges via the password recovery functionality
-
CVE-2026-116337
Uncontrolled resource consumption vulnerability in the Qt Framework HTTP response handling functionality of the Qt Network module.
-
CVE-2026-99319
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.