No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-99508
In the Linux kernel, the following vulnerability has been resolved: media: ipu-bridge: Fix use-after-free in IVSC error path ipu_bridge_get_ivsc_acpi_dev() returns an ACPI device with a reference held. If no matching CSI device is found, ipu_bridge_check_ivsc_dev() drops that reference before passing the device to dev_err(). Concurrent CSI device and ACPI namespace removal can drop the other references, making this the final put. dev_err() then reads the freed struct acpi_device and its kobject name. This was reproduced without kprobes by racing normal CSI platform-device unregistration and ACPI configfs table removal against the production ipu_bridge_init() entry. KASAN reported the final free through device_release(), followed by invalid reads through _dev_err(). Emit the error message while the lookup reference is still held, then drop the reference as before. Source reproducers and vulnerable/fixed serial logs, with only the build hostname redacted, are available at: https://github.com/kimaiden1984-boop/linux-ipu-bridge-acpi-uaf-reproducer The fixed target builds with W=1 on x86-64. This was not tested on physical IPU hardware. The tests establish runtime reachability but do not measure occurrence frequency on shipping systems or establish exploitability.
-
CVE-2026-99509
In the Linux kernel, the following vulnerability has been resolved: media: imon: fix use-after-free in display_close via dev_dbg ictx->dev is a raw pointer to the usb_interface's embedded device. On disconnect, usb_disconnect() can drop the last reference on the interface and free it while a userspace fd for /dev/lcd0 is still open. When that fd is later closed, display_close() dereferences the now-freed ictx->dev via dev_dbg(), causing a use-after-free. Remove the dev_dbg() calls that dereference ictx->dev in display_close() and free_imon_context(), rather than taking a reference on the device.
-
CVE-2026-99510
In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix use-after-free in hackrf_alloc_urbs() error path hackrf_alloc_urbs() frees the URBs it allocated so far when one allocation fails, but leaves the entries in dev->urb_list[] and dev->urbs_initialized untouched. The caller, hackrf_start_streaming(), then calls hackrf_free_urbs() on the error path, which walks dev->urbs_initialized entries and calls usb_free_urb() a second time on the already-freed URBs, causing a use-after-free (slab-use-after-free Write in usb_free_urb()). Drop the redundant cleanup loop inside hackrf_alloc_urbs() and let hackrf_free_urbs(), which the caller already invokes on error, own the cleanup of the successfully allocated URBs.
-
CVE-2026-99511
In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix use-after-free in cx23885_finidev due to race condition In cx23885_v4l2_dev_notify_init, &dev->cx25840_work is bound with cx23885_av_work_handler, and &dev->ir_rx_work and &dev->ir_tx_work are bound with cx23885_ir_rx_work_handler and cx23885_ir_tx_work_handler. cx23885_irq can schedule these works on system_wq when an AV_CORE interrupt is received, and the IR subdevice can also schedule the IR works from its interrupt service routine via the v4l2_device notify callback. If we remove the device, cx23885_finidev makes cleanup and the memory allocated for dev is released by kfree(dev), while the works mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cx23885_irq | schedule_work(&dev->cx25840_work) cx23885_finidev | cx23885_input_fini(dev) | cx23885_ir_fini(dev) | cx23885_shutdown(dev) | free_irq(pci_dev->irq, dev) | pci_disable_device(pci_dev) | cx23885_dev_unregister(dev) | v4l2_device_unregister(v4l2_dev) | kfree(dev) | // dev is freed | | cx23885_av_work_handler | // use dev (use-after-free) Fix it by canceling the works after the IRQ handler that can schedule them has been stopped, and before proceeding with the remaining cleanup in cx23885_finidev. Note that the flush_work() calls in cx23885_input_ir_stop() do not close this race: they only wait for works that are already queued or running at that moment, they do not prevent the IRQ handler, which is still registered at that point, from scheduling the works again afterwards, and they are skipped entirely when dev->sd_ir is NULL. The cancel_work_sync() calls are therefore placed after free_irq(), the only point at which no new work can be scheduled.
-
CVE-2026-99512
In the Linux kernel, the following vulnerability has been resolved: media: au0828: fix use-after-free in bulk_timeout timer on disconnect start_urb_transfer() arms dev->bulk_timeout, whose callback au0828_bulk_timeout() queues dev->restart_streaming; that work in turn calls start_urb_transfer() and re-arms the timer. au0828_dvb_unregister() cancels restart_streaming on disconnect but does not sync bulk_timeout. au0828_usb_release() then frees dev with kfree(), so a timer still armed or pending at that point can fire after the free and dereference dev through timer_container_of(). Sync the timer with timer_shutdown_sync() before cancel_work_sync(). The timer callback queues the work, so the timer must be stopped first; the shutdown variant is needed because the work re-arms the timer through start_urb_transfer(). The dvb->frontend == NULL early return guards the register-failure path where the timer was never set up. This bug was found by static analysis.
-
CVE-2026-99513
In the Linux kernel, the following vulnerability has been resolved: lockd: Fix use-after-free in nlmsvc_retry_blocked nlmsvc_retry_blocked() examines the block at the head of nlm_blocked under nlm_blocked_lock, then releases the lock before calling nlmsvc_grant_blocked() or retry_deferred_block(). The nlm_blocked list reference is all that keeps the block alive across that window. nlmsvc_grant_blocked() does take one of its own, but not until after the lock has been dropped. Unmounting the nfsd filesystem while a lock request is still blocked reaches nlmsvc_traverse_blocks(), which drops the list reference and frees the block along with the nlm_rqst hanging off it. BUG: KASAN: slab-use-after-free in nlm_async_call+0xd6/0x230 Read of size 8 at addr ffff88811b04c808 by task lockd/8377 nlm_async_call+0xd6/0x230 nlmsvc_retry_blocked+0x61c/0x800 lockd+0x144/0x1c0 Freed by task 8392: nlmsvc_release_block+0x231/0x290 nlmsvc_traverse_blocks+0x139/0x1b0 nlm_traverse_files+0x1aa/0xa00 nlmsvc_free_host_resources+0x12/0x60 nlm_shutdown_hosts_net+0x127/0x280 lockd_down+0xd5/0x1c0 Take a reference before releasing nlm_blocked_lock and drop it once the retry has run.
-
CVE-2026-99514
In the Linux kernel, the following vulnerability has been resolved: landlock: Fix superblock use-after-free in release_inode() Without this fix, release_inode() (task 1) can race with a umount operation in hook_sb_delete() (task 2). The order of operations in which the race occurs is: * task 2: hook_sb_delete() arrives at the end of the function, waiting for landlock_superblock(sb)->inode_refs to become zero. * task 1: release_inode(): does atomic_long_dec_and_test(), decrementing inode_refs to zero. * task 2: gets woken up through some other means, sees that inode_refs is zero and returns. The caller is the unmount operation and proceeds to release the superblock. * task 1: Runs wake_up_var(&landlock_superblock(sb)->inode_refs), *dereferencing the sb_security on the freed-up superblock*. Notably, wake_up_var() does not dereference the pointer passed to it, and only uses it to determine an overapproximated set of tasks to wake up. So while it's potentially possible for an attacker to provide a different value for that pointer, this only results in the wrong set of tasks getting woken up, and in this scenario, no further tasks are actually waiting. Nevertheless, KASAN detects it as a slab-use-after-free read on sb->s_security: BUG: KASAN: slab-use-after-free in release_inode+0x196/0x290 Read of size 8 at addr ffff888103b6c0a8 by task repro/217 release_inode+0x196/0x290 landlock_put_object+0x71/0x90 landlock_free_rules+0x38/0xc0 landlock_put_ruleset+0x47/0x130 fop_ruleset_release+0x33/0x40 __fput+0x305/0x780 Freed by task 54: kfree+0x11c/0x390 process_scheduled_works+0x766/0xe50 worker_thread+0x7bc/0xb20 The fix is to determine &landlock_superblock(inode->i_sb)->inode_refs only once earlier in release_inode(), and later use that precalculated address for the wake_up_var() call, without having to dereference through the superblock.
-
CVE-2026-99484
In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: Fix UAF of soundfont zones at note-on snd_emux_note_on() looks up the matching zones via snd_soundfont_search_zone(), which takes sflist->lock only during the lookup and returns the raw zone pointers after releasing it. The caller then stores them in vp->zone without any protection. Meanwhile, a concurrent SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES ioctl may unlink and free those zones in snd_soundfont_remove_unlocked(); this leads to a use-after-free in snd_emux_note_on(), and later at accessing the cached vp->zone, e.g. in snd_emux_send_effect(). Fix it by holding sflist->lock in snd_emux_note_on() over the whole zone lookup and voice setup, and let snd_soundfont_search_zone() require the caller to hold the lock, instead. snd_soundfont_lock_preset() takes sflist->lock for setting presets_locked, so the removal path now syncs with the note-on finish.
-
CVE-2026-99368
In the Linux kernel, the following vulnerability has been resolved: NFSD: Do not send CB_RECALL_ANY to NFSv4.0 clients deleg_reaper() sends CB_RECALL_ANY to every ACTIVE client holding delegations, but CB_RECALL_ANY is an NFSv4.1 operation. An NFSv4.0 client's callback service accepts only CB_GETATTR and CB_RECALL, so it replies OP_ILLEGAL. The decoder maps the unexpected opnum to -EIO, and nfsd4_cb_done() marks the client's callback channel down. Nothing brings the channel back. nfsd4_run_cb_work() sets NFSD4_CB_UP only for a minor version above zero, and the only nfsd4_probe_callback() call site an NFSv4.0 client reaches is nfsd4_setclientid_confirm(). One visit from the reaper therefore leaves the channel marked down until the client re-establishes its clientid. RENEW then returns NFS4ERR_CB_PATH_DOWN for as long as the client holds delegations. nfsd4_cb_channel_good() stops returning true, so the client is granted no further delegations. Skip clients at minor version zero.
-
CVE-2026-99357
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Copy the deferred RPC Call from the head buffer svc_defer() snapshots the RPC Call for replay once a pending cache upcall resolves. It copies the Call starting (rq_arg.len - head[0].iov_len) bytes before head[0].iov_base, a back-up that once covered a transport header. No transport has had one since commit 983084b2672c ("SUNRPC: Remove svc_rqst::rq_xprt_hlen"), so the two lengths are meant to be equal. An RPCSEC_GSS Call breaks that assumption. Unwrapping the integrity service truncates rq_arg.len by the length of the trailing checksum, and unwrapping the privacy service leaves rq_arg.len short by an amount the client sets with trailing bytes after the wrap token. Neither adjusts head[0].iov_len. Both lengths are size_t, so the subtraction underflows and the copy starts past head[0].iov_base. Every deferred integrity Call replays a shifted snapshot. A deferred replay skips GSS verification, so a shifted snapshot runs as an authenticated Call. With the privacy service the offset is client-chosen. A forged Call placed in that window, naming another user's GSS context handle, runs under that identity. Copy the Call from head[0].iov_base. Refuse to defer a Call whose length runs past the head buffer, so the copy cannot read out of bounds.
-
CVE-2026-99358
In the Linux kernel, the following vulnerability has been resolved: nfsd: zero NFSv4 COMPOUND tag padding nfs4svc_encode_compoundres() copies the tag bytes into reserved XDR space and skips directly to the aligned end of the field. xdr_reserve_space() rounds the reservation up but does not initialize the padding bytes. A remote client can choose a tag length that is not a multiple of four, causing one to three stale bytes from the response page to be returned in the COMPOUND reply. Use xdr_encode_opaque_fixed() to copy the tag and clear its XDR padding.
-
CVE-2026-99348
In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs to abort the rxrpc call on send error Fix afs_send_empty_reply() and afs_send_simple_reply() to always try to abort the rxrpc call rather than just aborting on -ENOMEM and otherwise abandoning it. If the call is already complete due to network failure or a received abort, this will do nothing. Also make afs_make_call() always abort on send error; again, it does nothing if the rxrpc call is already dead.
-
CVE-2026-99353
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject a socket that already has an svc_sock attached Writing the same socket descriptor to /proc/fs/nfsd/portlist twice attaches a second svc_sock to one socket. svc_setup_socket() saves the socket's callbacks before installing its own, so the second attach records svc_write_space() as the old write_space callback. svc_udp_init() invokes that callback by way of svc_sock_setbufsize(), and svc_write_space() then calls itself until the kernel stack is exhausted: BUG: TASK stack guard page was hit at ffffc900037d7ff8 svc_write_space+0x90/0x2b0 net/sunrpc/svcsock.c:429 svc_write_space+0xe6/0x2b0 net/sunrpc/svcsock.c:430 ... 700 more ... svc_sock_setbufsize+0x18d/0x220 net/sunrpc/svcsock.c:386 svc_udp_init net/sunrpc/svcsock.c:854 [inline] svc_setup_socket+0xb2f/0x1090 net/sunrpc/svcsock.c:1498 svc_addsock+0x2fd/0x760 net/sunrpc/svcsock.c:1547 __write_ports_addfd fs/nfsd/nfsctl.c:742 [inline] write_ports+0xa5b/0xcc0 fs/nfsd/nfsctl.c:861 nfsctl_transaction_write+0x106/0x1a0 fs/nfsd/nfsctl.c:112 svc_data_ready() and svc_tcp_state_change() chain through their saved callbacks the same way, so a TCP descriptor added twice recurses on the next incoming segment instead. Reaching any of this takes a writer on portlist, and the nfsd filesystem sets no FS_USERNS_MOUNT, so the reproducer needs CAP_SYS_ADMIN in the initial user namespace. Reject a socket that already carries sk_user_data. svc_setup_socket() overwrites that field unconditionally, so a socket some other consumer has claimed is one NFSD would corrupt whether or not the callbacks recurse.
-
CVE-2026-99354
In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin gss module across auth_domain RCU free A gss auth_domain stores a raw pointer to svcauthops_gss in dom->flavour, and its release queues svcauth_gss_domain_release_rcu() via call_rcu(). Both live in auth_rpcgss.ko text, and nothing pins the module while a domain referencing it is reachable. rmmod auth_rpcgss can therefore unmap that text while an NFSD export still holds a reference to the domain. The export cache is one such holder. When the export is finally released, the domain reference drops from module text: svc_export_put() auth_domain_put(exp->ex_client) auth_domain_release() dom->flavour->domain_release(dom) /* into module text */ svcauth_gss_domain_release() call_rcu(&dom->rcu_head, svcauth_gss_domain_release_rcu) Once auth_rpcgss is unloaded, the domain_release call lands in unmapped memory. The rcu_barrier() in exit_rpcsec_gss() does not help: it waits only for callbacks already queued, and this one is not queued until the export goes away. NFSD's NFSv4 objects import symbols from auth_rpcgss.ko, so only a server built without CONFIG_NFSD_V4 can unload auth_rpcgss while exports still name a gss domain. Take a module reference in svcauth_gss_register_pseudoflavor() before publishing the domain and drop it at the end of svcauth_gss_domain_release_rcu(). The rcu_barrier() then holds the module image until this callback has returned. [ cel: rewrote description ]
-
CVE-2026-99355
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix oversized GSS proxy token copy gss_read_proxy_verf() allocates one page per token chunk, but it copies the entire linear head of an RPC request into in_token->pages[0]. A UDP datagram can leave more than PAGE_SIZE bytes in the linear head, so a large RPCSEC_GSS INIT token overwrites following pages. Copy the linear head in page-sized chunks before switching to the request page array. The linear head itself can span multiple pages.
-
CVE-2026-99343
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access.
-
CVE-2026-99344
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e. mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN unfortunately allows the nonsensical combination, i.e. doesn't fail, but KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME is set. Breaking that invariant can lead to a variety of issue, particularly in MMU code that keys off EFER.LMA when determining whether to emulate/virtualization 4/5-level paging versus PAE paging.
-
CVE-2026-99346
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch When the pCPU where the VMCB was most recently used is switched, reset the ASID generation in both VMCBs, triggering new ASID allocation for the immediate VMRUN as well as the next VMRUN on the other VMCB. The ASID is shared between vmcb01 and vmcb02, and gets flushed on every nested transition. However, since pCPU tracking is done per VMCB, it is possible for one VMCB to allocate a new ASID when migrated to a new pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can result in the same ASID being used by multiple vCPUs on the old pCPU. Example scenario: - vCPU runs on pCPU A, vmcb01 is active, asid=1. - vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2. - Another vCPU runs on pCPU A and allocates asid=2 as well. - vCPU migrates back to pCPU A, and then switches to vmcb02 before it runs again with vmcb01. - No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2. - Two vCPUs end up using asid=2 on the same pCPU. Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its pCPU does not change. Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested enablement as hardening, so that a new ASID allocation is always triggered when nested is disabled and re-enabled. No performance regression was noticed when overcommitting L1 vCPUs in L0 (to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a tight loop bouncing between 2 vCPUs in L2. An alternative (and perhaps more proper) fix would be tracking the ASID per-VMCB instead (e.g. [1]). However, that's a more involved change, and it would result in having different ASIDs for L1 and L2 without actually properly maintaining them. It would probably work because all TLB flushes target the current VMCB, and the other VMCB is always flushed on nested transitions, but the code ends up in an arguably more fragile state. Punt a proper clean fix to an incoming (and overdue) overhaul of SVM's ASID usage [2]. [1] https://lore.kernel.org/lkml/[email protected] [2] https://lore.kernel.org/kvm/[email protected]
-
CVE-2026-99496
In the Linux kernel, the following vulnerability has been resolved: s390/vmcp: Initialize full session info to zero The cma_alloc bit as well as the response can contain old data. cma_release will not free the kmalloced memory in that case and the response code might leak kernel stack data to CAP_SYS_ADMIN users.
-
CVE-2026-99482
In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: ps: fix snd_acp63_remove() teardown ordering The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM child platform devices, but snd_acp63_remove() unregisters them while the interrupt is still held by devres, which frees it only after remove returns. An interrupt in this window is a use-after-free. Mask the ACP interrupt sources and call devm_free_irq() before the first child device is unregistered. The masking goes through the new acp_hw_ops->disable_interrupts callback, keeping the remove path platform-agnostic. The interrupt line is shared, and acp_hw_deinit() clears the sources only after the children are gone, which would leave the line raised with no handler left to ack it. The window predates the tagged refactor, which only reshaped the dereferences. devm_free_irq() waits for in-flight handlers, but not for work the hardirq has already queued: acp63_irq_handler() schedules amd_sdw_irq_thread on the SoundWire manager. Draining that work in the manager's remove path is a soundwire-side change and follows separately. This issue was found by an in-house static analysis tool.
-
CVE-2026-99350
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix update of call->tx_pending without holding lock Currently, rxrpc_send_data() updates call->tx_pending just before it returns - but it won't be holding the call->user_mutex when it does this if a wait was interrupted by a signal. This would allow a parallel sendmsg() to race. Further, both the callers of rxrpc_send_data() call it with the lock held, and then it returns an indication through the parameter list to say whether it has dropped the lock or not - after which the callers both just drop the lock if it's still held. Fix this by: (1) Moving the release of call->user_mutex down into rxrpc_send_data() and get rid of the indicator parameter. This makes it easier to see where the lock is held. (2) After waiting, if the attempt to reacquire the mutex is interrupted, just return directly there rather than going to out_unlock (3) Restricting the txb variable to inside the buffering loop and leaving ->tx_pending set until we've queued the buffer. Note that there's a slight change in behaviour in that wait_for_space failure now doesn't check for completion because it doesn't hold the call user_mutex. The caller, however, should re-issue the send and pick up any error at a second attempt.
-
CVE-2026-99504
In the Linux kernel, the following vulnerability has been resolved: ASoC: audio-graph-card2: Fix use-after-free in audio_graph2_link_c2c() of_graph_get_next_port() consumes the reference of its prev argument. port0 is only borrowed from the caller's iterator, so the call drops a reference the function does not own, and port0 is dereferenced again afterwards. Pass an extra reference, as graph_count_c2c() does, so the reference the callee consumes is the one taken here.
-
CVE-2026-99349
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix lack of short-send handling in rxrpc_kernel_send_data() Fix rxrpc_kernel_send_data() to loop around if it detects a short send. David Laight suggested doing it here rather than wrapping all the calls in loops. Further, remove the len argument and use the iterator count instead and return 0 on success, not the amount copied. Note this is also a prerequisite for changing the way rxrpc_send_data() works to return a short send rather than an error if some data was buffered.
-
CVE-2026-99347
In the Linux kernel, the following vulnerability has been resolved: ALSA: x86: hdmi: fix chmap array missing terminator entry had_build_channel_allocation_map() allocates a single struct snd_pcm_chmap_elem via kzalloc() and stores it as intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to be a zero-terminated array (see snd_pcm_std_chmaps[]), but had_register_chmap_ctls() never overrides the TLV callback installed by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from ALSA core is left in place. pcm_chmap_ctl_tlv() is reachable by any local user via SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and walks the array with "for (map = info->chmap; map->channels; map++)". Since the driver's single element is never terminated, this walks past the allocation. The same pointer is also freed on hot-unplug and rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback runs under card->controls_rwsem without that mutex, so the walk can also race a concurrent free of the array. Fix this by allocating a second, zeroed element so the array is properly terminated, and by dropping the inherited TLV callback entirely at registration time, since the driver never implements one of its own.
-
CVE-2026-99417
In the Linux kernel, the following vulnerability has been resolved: ovl: fix a torn path in ovl_get_redirect() A hard link of a metacopy file that races with a rename of an ancestor stores a redirect to the wrong lower file. Each component of an absolute redirect must be the name that a dentry has in the parent that the walk continues with. ovl_get_redirect() copies the name under d_lock and calls dget_parent() after the unlock, and the callers for a hard link hold no lock that stops a rename across directories. A rename between the two steps combines the old name with the new parent. With delays in ovl_get_redirect(), an unprivileged user hard-linked a metacopy file while renaming its ancestor to another directory, the stored redirect named another lower path, and after a remount the file showed the data of a root-only file. Fix this by taking the parent first and checking it again under d_lock.
-
CVE-2026-99418
In the Linux kernel, the following vulnerability has been resolved: ovl: do not copy up an xattr value that was never read Copy-up stores uninitialized kernel memory in an xattr of the upper file, where the user can read it. ovl_copy_xattr() may only pass bytes to ovl_do_setxattr() that ovl_do_getxattr() has read. When the read fails with -ERANGE the function asks for the size again, and if the new size fits the buffer it stores the buffer although nothing was read into it. The buffer comes from kvmalloc(), or it still holds the value of the previous xattr. A FUSE lower layer that answers every sized GETXATTR with -ERANGE made copy-up store 4096 bytes that the server never sent, with a kernel pointer in them, as an xattr of the upper file. Fix this by failing the copy-up with -EIO when the size that follows -ERANGE fits the buffer.
-
CVE-2026-99419
In the Linux kernel, the following vulnerability has been resolved: ovl: do not copy up a dentry that was removed A change to a removed file through an open descriptor replaces whatever has its old name in the upper layer. Copy up must only create a name in the upper directory, never replace one. After an unlink, an rmdir or a rename over a lower dentry, a dentry that an open file keeps alive still has its old parent and name, but in the upper directory that name is now a whiteout or a new object. ovl_copy_up_workdir() renames the copy over it, which brings back the removed object and destroys whatever took its name. An unprivileged user opened a lower FIFO and unlinked it, root created a file at that name, and fchmod on the old descriptor replaced the file of root with the FIFO. Fix this by looking up the target name of the rename in ovl_copy_up_workdir() with LOOKUP_EXCL, so that copy up fails with -EEXIST if the name is taken, as copy up with O_TMPFILE already does when it links the copy to the name. [amir: use LOOKUP_EXCL instead of relying on d_unhashed()]
-
CVE-2026-99431
In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel quota sync work before freeing quota info OCFS2 quota info owns dqi_sync_work and must outlive both its timer and qsync_work_fn(). ocfs2_local_free_info() frees that owner without cancelling the work, relying on the quota suspend/disable wrappers. Loading quotas on a read-only to read-write remount can successfully queue the work in ocfs2_global_read_info() and then fail while attaching a dquot to an existing inode in add_dquot_ref(). The quota core unwinds that failure directly through dquot_disable(), bypassing the OCFS2 wrapper: Remount task (s_umount write) Timer/workqueue ocfs2_global_read_info() schedules dqi_sync_work add_dquot_ref() returns an error dquot_disable() ocfs2_local_free_info() frees oinfo delayed-work timer expires qsync_work_fn() reads oinfo The timer core can then write to the freed embedded timer, or qsync_work_fn() can read oinfo->dqi_gqinode before its s_umount trylock. The outer ocfs2_disable_quotas() cleanup skips the failed type because dquot_disable() has already cleared its loaded state. Cancel dqi_sync_work synchronously at the start of ocfs2_local_free_info(), before dropping the global inode or freeing any owner state. The work is initialized whenever read_file_info() succeeds. dquot_disable() holds s_umount for write, so the callback skips its quota scan via down_read_trylock() and can finish without waiting for teardown. The synchronous cancel also handles its self-rearm. KASAN report as below: BUG: KASAN: slab-use-after-free in __run_timers+0x9e9/0xa10 Write of size 8 at addr ffff888111b0aad0 by task swapper/3/0 Call Trace: <IRQ> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? __run_timers+0x9e9/0xa10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? __run_timers+0x9e9/0xa10 kasan_report+0xe0/0x110 ? __run_timers+0x9e9/0xa10 __run_timers+0x9e9/0xa10 ? __pfx___run_timers+0x10/0x10 ? __lock_acquire+0x5a3/0x2140 ? __pfx_do_raw_spin_lock+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 timer_expire_remote+0xfa/0x160 ? __pfx_timer_expire_remote+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x160 tmigr_handle_remote_up+0x4ba/0x9d0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? tmigr_handle_remote+0x21a/0x340 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups_from+0x5a/0x160 tmigr_handle_remote+0x24f/0x340 ? __pfx_tmigr_handle_remote+0x10/0x10 ? lock_acquire+0x190/0x300 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 run_timer_softirq+0x222/0x270 ? __pfx_run_timer_softirq+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xb8/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0x1fa/0x8d0 ? __pfx_handle_softirqs+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __hrtimer_rearm_deferred+0x1fb/0x5d0 __irq_exit_rcu+0x113/0x1e0 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 ? ct_kernel_exit.constprop.0+0xc5/0xf0 ? do_idle+0x3ae/0x650 default_idle+0x9/0x10 default_idle_call+0x6c/0xb0 do_idle+0x3ae/0x650 ? cpuhp_online_idle+0x9c/0xb0 ? __pfx_do_idle+0x10/0x10 ? __entry_text_end+0x1020f6/0x1020f9 ? lockdep_hardirqs_on_prepare+0xeb/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x160 ? srso_a ---truncated---
-
CVE-2026-99493
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Guard domain index uses against speculative bypass The previous array_index_nospec() placement only covered the admin permission check, leaving ap_test_config_usage_domain() and ap_test_config_ctrl_domain() in the CCA path exposed to speculative execution. Move the sanitization to before all permission and config checks in both the CCA and EP11 paths. Hold the sanitized domain value in another variable so that the later use can choose to use either the original value (subject to speculative execution) or the sanitized value (which may in case of AUTOSEL_DOM reflect the wrong value). Before that, check the domain value to be either AUTOSEL_DOM or in range 0...AP_DOMAINS-1 and return with -EINVAL in case this check does not pass.
-
CVE-2026-99471
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls The virtual-mode HPT hcall handlers (H_ENTER, H_REMOVE, H_BULK_REMOVE, H_CLEAR_REF, H_CLEAR_MOD) call into book3s_hv_rm_mmu.c, which accesses memslots via kvm_memslots_raw(). kvm_memslots_raw() uses rcu_dereference_raw_check() to bypass SRCU lockdep annotation checking. This is safe in real mode because the entire guest entry/exit is wrapped in srcu_read_lock/unlock inside kvmppc_run_core() and kvmhv_run_single_vcpu(). However, since commit 6165d5dd99db ("KVM: PPC: Book3S HV: add virtual mode handlers for HPT hcalls and page faults"), these same handlers are also executed in virtual mode via kvmppc_pseries_do_hcall(), which runs after SRCU has already been released on guest exit. A concurrent KVM_SET_USER_MEMORY_REGION deletion or move can therefore call synchronize_srcu_expedited() — which does not wait for this thread — and then kfree(slot) and vfree(slot->arch.rmap) while the hcall handler still holds a raw pointer to the memslot. lock_rmap() then writes to freed vmalloc memory, leading to use-after-free and memory corruption. Because kvm_memslots_raw() suppresses lockdep checks, this race is entirely silent. Fix this by factoring out the 7 HPT hcall handlers (H_REMOVE, H_ENTER, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, H_BULK_REMOVE) into a helper function, kvmppc_pseries_do_hpt_hcall(), and wrapping its call site in srcu_read_lock(&kvm->srcu) / srcu_read_unlock(&kvm->srcu, idx). Targeting only the HPT hcalls avoids wrapping non-HPT hcalls that sleep (such as H_CONFER, H_REGISTER_VPA, H_PAGE_INIT) or handlers that already acquire SRCU internally (such as H_RTAS).
-
CVE-2026-99465
In the Linux kernel, the following vulnerability has been resolved: media: microchip-isc: take a reference on the parsed endpoints for_each_endpoint_of_node() drops the reference on the current node as it advances. xisc_parse_dt() and isc_parse_dt() store the node in subdev_entity->epn and release it later with of_node_put(), but never took their own reference, so the stored pointer refers to an already-released node. This underflows the refcount and can use-after-free, reachable through the camera device tree overlay. Take a reference with of_node_get() when storing the node, and drop it in microchip_isc_subdev_cleanup() so the entities the bind loop never reaches on an early exit do not leak it.
-
CVE-2026-99452
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: delete channel-context timers on deinit ath9k_deinit_channel_context() cancels chanctx_work but does not delete the offchannel and sched timers set up by ath9k_init_channel_context(). If either timer fires after deinit (e.g. during driver unload or suspend), it accesses sc->sc_ah which may already be freed by ath9k_hw_deinit(), causing a use-after-free. Delete both timers with timer_shutdown_sync() before cancelling the work item.
-
CVE-2026-99453
In the Linux kernel, the following vulnerability has been resolved: xen-blkfront: unbind irq before tearing down ring and shadow requests In blkif_free_ring(), the driver tears down the ring's persistent grants, shadow request arrays, and shared ring structure (xenbus_teardown_ring), and only calls unbind_from_irqhandler() at the very end. While blkif_free_ring() is freeing persistent grants and clearing the shadow array, the event channel interrupt (blkif_interrupt) is still registered and active. If an interrupt arrives from the backend during this teardown window, blkif_interrupt() reads rinfo->ring.sring and, via blkif_completion(), accesses rinfo->shadow[id].grants_used and rinfo->shadow[id].sg. blkif_free_ring() tears these structures down without holding rinfo->ring_lock, and the handler only checks info->connected at entry, so this is a real race resulting in a use-after-free or NULL pointer dereference. Fix this by moving unbind_from_irqhandler() to the beginning of blkif_free_ring(). Calling unbind_from_irqhandler() first frees the IRQ and synchronizes with any in-flight interrupt handlers on other CPUs before ring memory and shadow request structures are deallocated, matching the teardown order in drivers/net/xen-netfront.c.
-
CVE-2026-99454
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix protected RX frame validation in decrypt path The RX software decrypt path mishandles crafted protected frames from a malicious AP in two ways: 1) decryptor() never checks that a protected frame is long enough to hold the 802.11 header plus the per-cipher trailer. All of rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute length = hdr.len - hdrlen - iv_len; and act on the result, and recvframe_chkmic() similarly computes datalen = hdr.len - hdrlen - iv_len - icv_len - 8; for TKIP (the 8-byte Michael MIC is not accounted for in icv_len). A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows these unsigned subtractions, turning into a ~4 GiB iteration count in aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le() length, causing out-of-bounds reads/writes of up to ~4 GiB starting from the rx skb. Reject such frames in decryptor() before touching the IV; this covers all three ciphers and the TKIP MIC check, and also keeps the unconditional iv[3] access within the frame. 2) validate_80211w_mgmt() keeps using the frame - two memcpys through the stale rx_data pointer and a pkt_len update - before checking whether decryptor() returned NULL. On decrypt failure (e.g. a unicast protected deauth/disassoc/action frame with a bad MIC, which this path always software-decrypts) the skb has already been freed, so this is a use-after-free read/write, and the caller's error path frees the frame a second time, drifting free_recvframe_cnt. Bail out immediately when decryptor() fails, freeing the temporary mgmt_DATA buffer first. Discovered by Atuin - Automated Vulnerability Discovery Engine.
-
CVE-2026-99444
In the Linux kernel, the following vulnerability has been resolved: power: supply: sbs-battery: disable polling before supply teardown The managed poll-work cancellation is registered before the power supply, so cleanup unregisters the supply before draining polling. A pending or running poller can then call power_supply_changed() on the released supply. Commit 8d59cf3887fb ("power: supply: sbs-battery: Fix use-after-free in power_supply_changed()") moved the IRQ request after supply registration, but did not change the poll-work cancellation order. Add a later managed action that disables and drains polling before supply teardown. Its retained disabled state prevents external-power callbacks from rearming the poll work after it has been drained. Keep the original autocancel to initialize work before supply callbacks can run and to cover failed supply registration. The teardown ordering issue was found by static analysis.
-
CVE-2026-99446
In the Linux kernel, the following vulnerability has been resolved: phy: core: Fix race-condition between _of_phy_get() and try_module_get() Sashiko asked during a patch review if the existing usage pattern had a race condition; specifically in of_phy_get() if it was possible between returning from _of_phy_get() and running try_module_get() that a module might be unbound leading to use-after-free. Looking at the code this appears to be so, there is no linkage between the phy and module under a synchronisation primitive. Using the phy_provider_mutex in phy_get() will ensure there is a link between the returned phy pointer and the module_get() bumping the module reference count. Amend phy_get(), of_phy_get() and devm_of_phy_get_by_index() to fix the same usage pattern. phy_provider_unregister() must take the phy_provider_mutex so amending phy_get()/of_phy_get() to take that same mutex guarantees there is no use-after-free.
-
CVE-2026-99448
In the Linux kernel, the following vulnerability has been resolved: ufs: use u64 for directory size in ufs_last_byte ufs1_read_inode() and ufs2_read_inode() copy the untrusted 64-bit on-disk size into inode->i_size. ufs_last_byte() then truncates that value to an unsigned int before calculating the valid extent of a directory folio. A directory size of exactly 4 GiB is truncated to zero. In ufs_find_entry(), subtracting the requested record length from that zero forms an endpoint almost 4 GiB beyond the mapped folio. A crafted UFS2 image produces: BUG: KASAN: use-after-free in ufs_find_entry+0x583/0x6e0 [ufs] Read of size 1 ... ufs_find_entry ufs_inode_by_name ufs_lookup __lookup_slow path_lookupat The KASAN classification reflects that the adjacent physical page was free; the source-level operation is an out-of-folio read. A controlled UFS1 test with CONFIG_UFS_FS_WRITE enabled also made ufs_find_entry() return a directory entry from an adjacent anonymous page. unlink() then passed that pointer to ufs_delete_entry(), which cleared the adjacent page's 3 2-bit d_ino. This write result reproduced three out of three times. UFS normally requires a privileged mount path. A relevant boundary is a privileged automounter or image-processing service handling an attacker-supplied filesystem. The write primitive additionally requires UFS1 to be mounted read-write with CONFIG_UFS_FS_WRITE enabled; the read is reachable with read-only UFS2. Keep the intermediate size arithmetic at 64 bits so non-final pages are bounded at PAGE_SIZE. With this change, the same controlled tests reach the real on-disk directory entry and produce no adjacent-page write or KASAN report. A reproducer and full validation logs are available on request. The vulnerable helper is present in v7.2-rc3, v7.1, v6.18.38, v6.12.95, v6.6.111, and upstream master at 1229e2e57a5c. Runtime reproduction and fix validation were performed in an x86-64 QEMU guest running v7.2-rc3 with generic KASAN.
-
CVE-2026-99451
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: unlink TWT flow if the MCU rejects the agreement mt7996_mac_add_twt_setup() links a new flow into dev->twt_list before asking the MCU to add the agreement, but exits without unlinking the flow if the request fails. The flow-ID and table masks are only committed after MCU success, so the still-linked flow is invisible to the mask-gated teardown paths. If the station retries the setup, the same slot is cleared and its embedded list node reinitialized while it is still linked, corrupting dev->twt_list. If the station disassociates instead, teardown skips the flow and station storage can be freed while the node remains linked. A later scheduling or debugfs twt_stats walk can then dereference the freed flow, resulting in a use-after-free. Unlink the flow when the MCU rejects the agreement. This restores the list to its pre-request state while leaving the unchanged mask and agreement accounting untouched.
-
CVE-2026-99436
In the Linux kernel, the following vulnerability has been resolved: media: rc: After rc_unregister_device() timers can be re-armed If rc_keydown() is called after rc_register_device(), then the timers can be re-armed. Delete them again for a final time.
-
CVE-2026-99437
In the Linux kernel, the following vulnerability has been resolved: media: rc: Use after free in ir_raw_event_handle() If rc_unregister_device() is called while IR is being processed, then ir_raw_event_handle() could call wake_up_process(dev->raw->thread) after kthread_stop(dev->raw->thread). Avoid use after free by using get_task_struct().
-
CVE-2026-99438
In the Linux kernel, the following vulnerability has been resolved: media: rc: mce_kbd: Fix inconsistent locking of keylock data->keylock is taken with spin_lock() in ir_mce_kbd_decode(), which runs in the raw IR decode kthread with local interrupts enabled, but with spin_lock_irqsave() in mce_kbd_rx_timeout(), the rx_timeout timer callback, which runs in softirq context. If the decode kthread is holding keylock via spin_lock() when a timer interrupt fires on the same CPU and the softirq runs mce_kbd_rx_timeout(), the softirq spins forever waiting for a lock that only the now-preempted kthread can release, while the kthread cannot run again until the softirq gives up the CPU. This deadlocks the CPU.
-
CVE-2026-99439
In the Linux kernel, the following vulnerability has been resolved: media: rc: Ensure registered is cleared in error path If rc_register_device() fails, ensure that registered is not set to true. If lirc_register() succeeded, then userspace could have an open file descriptor open. This leads to a use-after-free. lirc_unregister() must be called with registered = false, else there is a possibility that an fd is open and polling, which would never return POLLERR unless registered is false. Note that registered must be changed under dev->lock, many functions read registered under lock (e.g. lirc_ioctl).
-
CVE-2026-99440
In the Linux kernel, the following vulnerability has been resolved: media: rc: Ensure that rc_unregister_device() does not free input device During or after rc_unregister_device(), IR may still be reported which results in a input event being reported. This could result in a null pointer deref in rc_keydown() or a use-after-free of the input device if the pointer was read before it is set to NULL.
-
CVE-2026-99442
In the Linux kernel, the following vulnerability has been resolved: nvmem: core: Fix OOB read for bit offsets of more than one byte When the bit offset is BITS_PER_BYTE or larger the read position is advanced by `bytes_offset`. This is not taken into account in the per-byte read loop which still reads `cell->bytes` resulting in an out of bounds read of `bytes_offset` bytes. The information read OOB does not leak directly as the erroneously read bits are cleared. Detected by KASAN while looking for a use-after-free in simplefb.c.
-
CVE-2026-99430
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix chunk number of the first chunk in a local quota file Mounting a crafted OCFS2 image can corrupt kernel memory. When the local quota file header of such an image claims zero chunks, the first quota entry allocated during the mount gets a chunk number taken from a kernel pointer, and releasing that entry clears a bit far outside the chunk bitmap. The write will corrupt the data stored at that address, and the corruption may lead to a system crash or damage unrelated data. Mounting requires CAP_SYS_ADMIN, so it takes an untrusted image, such as removable media or a loop mount of a file from elsewhere. Since the chunk number comes from a kernel pointer, the address of the bit that gets cleared differs from boot to boot, and the issue has been reported under several titles: - BUG: unable to handle kernel paging request in ocfs2_local_release_dquot - KASAN: use-after-free Write in ocfs2_local_release_dquot - KASAN: slab-out-of-bounds Write in ocfs2_local_release_dquot - KASAN: slab-use-after-free Write in ocfs2_local_release_dquot - KFENCE: use-after-free write in ocfs2_local_release_dquot Note that none of these is a use-after-free in the quota code: the chunk and its buffer head are alive. The bit that gets cleared lies far outside the bitmap. KASAN and KFENCE name each report based on the object occupying that address, which explains why the same issue is reported under so many different titles. In the report I sent, the address fell in a free page, which KASAN labels use-after-free. There are known reproducers. Both a syzkaller and a C reproducer are available from the Google Drive link [1] in my report thread. The issue was found by our modified syzkaller, not a theoretical thing found by an LLM. I have not seen it outside fuzzing, so it is not affecting me in the real world. The local quota file in OCFS2 is divided into chunks, and each chunk begins with a header block holding a bitmap of the quota entries that chunk has handed out. Chunks are numbered from zero, and that number is used to convert the file offset of an entry back into a bit position in the bitmap. ocfs2_local_quota_add_chunk() appends a new chunk to the in-memory list and numbers it one past the chunk that was last: list_add_tail(&chunk->qc_chunk, &oinfo->dqi_chunk); chunk->qc_num = list_entry(chunk->qc_chunk.prev, struct ocfs2_quota_chunk, qc_chunk)->qc_num + 1; The predecessor is looked up after the new chunk is added to the list, so if the list was empty, the prev pointer is the list head itself. The head is the dqi_chunk member of struct ocfs2_mem_dqinfo and is not a chunk, so reading qc_num through it lands 16 bytes past the start of the head, on the dqi_gqinode pointer that follows it. The first chunk of the file is then numbered with the lower half of a kernel pointer instead of 0. The list is empty when the local quota file header claims the file has no chunks. ocfs2_local_read_info() takes dqi_chunks from that header without validating it, so an image with dqi_chunks == 0 takes this path when the first quota entry is allocated. ocfs2_create_local_dquot() turns the bad number into a file offset with ol_dqblk_off(), which shifts a 32-bit block number left by the block size bits, so the top bits of such a large block number are lost. ocfs2_local_release_dquot() turns the offset back into a bit index with ol_dqblk_chunk_off(), using the full chunk number, so the lost bits push that index far outside the bitmap, and clearing it corrupts unrelated memory. Compute the chunk number before putting the chunk on the list, and use 0 when the list is empty.
-
CVE-2026-99432
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: hold the lookup reference across convert AST enqueue dlm_convert_lock_handler() drops the reference it took when it found the lock on res->granted at its leave label, one statement before it calls dlm_queue_ast(). dlm_free_dead_locks() takes res->spinlock and drops the list and base references, so a peer death landing in that gap leaves the handler's own put as the one that frees the lock, and __dlm_queue_ast() then reads lock->lockres from freed memory. The handler is registered next to dlm_create_lock_handler(), so a convert message buffered on a dying peer's socket arrives on the same o2net receive work that o2net_disconnect_node() does not wait for. The two can interleave as follows, with the reference counts as they are before this fix: Socket data-ready Node-down thread Receive worker ----------------- ---------------- -------------- o2net_data_ready() select sc under callback read lock o2net_disconnect_node() queue shutdown begin flush; new color queue sc_rx_work in the new color release callback lock shutdown socket flush returns read buffered convert_lock dlm_convert_lock_handler() find lock on res->granted dlm_lock_get() refs = 3 lock res->spinlock __dlmconvert_master() call_ast = 1 unlock res->spinlock DLM node-down cleanup lock res->spinlock dlm_free_dead_locks() unlink lock put list ref refs = 2 put base ref refs = 1 unlock res->spinlock dlm_lock_put() refs = 0 free lock dlm_queue_ast() __dlm_queue_ast() read lock->lockres (use-after-free) __dlmconvert_master() only moves the lock between lists, so the count entering the gap is base, list and lookup. Drop the lookup reference after the AST is queued instead of before it and the race ends with the one __dlm_queue_ast() took, which dlm_flush_asts() releases later with ast_pending cleared and ast_list unlinked. No extra get is needed, and the normal case ends with the same count as before. dlmconvert_master() has the same shape but is only reached from dlmlock() for a lock this node owns, which dlm_free_dead_locks() never matches.
-
CVE-2026-99433
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: hold a lock reference across grant AST enqueue A newly granted remote lock must remain alive until its grant AST is queued. dlmlock_master() publishes the lock on res->granted with its base and queue references, then drops res->spinlock before calling dlm_queue_ast(). The resource's reserved AST count does not retain the lock itself. This can fail when a peer dies with an immediately grantable CREATE buffered on its socket. O2NET's node-down callback flushes receive work before DLM cleanup, but the flush only waits for work queued on entry. A data-ready callback that already selected the socket container can queue new receive work after the flush advances its work color. Socket shutdown does not discard bytes already queued for TCP receive. The late receive work and DLM node-down cleanup can interleave as follows (the lock reference operations shown are before this fix): Socket data-ready Node-down thread Receive worker ----------------- ---------------- -------------- o2net_data_ready() select sc under callback read lock o2net_disconnect_node() queue shutdown begin flush; new color queue sc_rx_work in the new color release callback lock shutdown socket flush returns read buffered CREATE dlmlock_master() lock res->spinlock add lock to granted unlock res->spinlock DLM node-down cleanup lock res->spinlock dlm_free_dead_locks() unlink lock put queue/base refs free lock unlock res->spinlock dlm_queue_ast() __dlm_queue_ast() read lock->lockres (use-after-free) DLM cleanup holds res->spinlock while dlm_free_dead_locks() drops the queue and base references. The CREATE handler no longer holds that spinlock when __dlm_queue_ast() reads the lock, before taking its AST list reference. Take a temporary lock reference under res->spinlock when a grant AST will be queued, and drop it after dlm_queue_ast(). This keeps the lock alive across cleanup until the AST path has taken its own reference, without reversing the existing AST/resource lock order. KASAN report as below: BUG: KASAN: slab-use-after-free in __dlm_queue_ast+0x8a4/0xc00 Read of size 8 at addr ffff88810ead5940 by task kworker/u16:3/52 CPU: 3 UID: 0 PID: 52 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-bt-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: o2net o2net_rx_until_empty Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? __dlm_queue_ast+0x8a4/0xc00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? __dlm_queue_ast+0x8a4/0xc00 kasan_report+0xe0/0x110 ? __dlm_queue_ast+0x8a4/0xc00 __dlm_queue_ast+0x8a4/0xc00 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_lock+0x130/0x270 ? __pfx___dlm_queue_ast+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x45/0x60 ? srs ---truncated---
-
CVE-2026-99434
In the Linux kernel, the following vulnerability has been resolved: ocfs2/heartbeat: unlink live slots when their node is missing o2hb_shutdown_slot() returns immediately when its node is no longer in the configfs registry. A slot can still be linked in o2hb_live_slots when that lookup fails. Region teardown or startup-error cleanup then frees the slot array without removing its embedded list member. With the same peer live in another region, the next list update can follow a predecessor into the freed array. Reusing the node number can also make a later insertion encounter that stale member. Always remove the slot under o2hb_live_lock, even when node lookup fails. Preserve aggregate membership accounting and the last-region DOWN callback: the existing callback interface explicitly permits a NULL node for DOWN events. Only drop the node reference when lookup returned one. This closes both normal release and startup-abort paths without changing the publication or callback locking protocol. Also require a configured node before admitting a new live slot in o2hb_check_slot(). The early live-bitmap check is not held through admission: the last live slot in another region can be removed in between. Without a node, admission can then queue an UP event with a NULL argument and hit the event helper's BUG_ON. Existing live slots can still leave and generate NULL-node DOWN events. A controlled probe-instrumented test reproduced this while stopping one of two regions after removing the peer from configfs. Its KASAN report includes: BUG: KASAN: slab-use-after-free in __list_del_entry_valid_or_report+0x1e0/0x210 Read of size 8 at addr ffff888106a4ac60 by task o2hb-pmbd0058_b/497 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 kasan_report+0xe0/0x110 __list_del_entry_valid_or_report+0x1e0/0x210 o2hb_do_disk_heartbeat+0x1591/0x2c50 o2hb_thread+0x1ed/0xe70 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 491: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x2de/0x780 o2hb_region_dev_store+0x7c2/0x1b60 configfs_write_iter+0x2f9/0x4f0 vfs_write+0x639/0x1010 ksys_write+0x111/0x200 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 491: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 o2hb_unmap_slot_data+0x1db/0x330 o2hb_region_release+0x14b/0x4f0 config_item_cleanup+0x14b/0x230 config_item_put+0x79/0x90 configfs_rmdir+0x58a/0x910 vfs_rmdir+0x2e8/0x820 filename_rmdir+0x3b1/0x520 __x64_sys_rmdir+0x4b/0x70 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f
-
CVE-2026-99435
In the Linux kernel, the following vulnerability has been resolved: media: rc: Fix use after free in bpf progs Since commit dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks"), rcdev->raw is no longer set to NULL after device unregister. raw->progs could point to stale data.
-
CVE-2026-99425
In the Linux kernel, the following vulnerability has been resolved: ovl: hold a reference on the parent in readdir Listing a directory on an overlay uses a freed dentry and crashes the kernel when a lookup moves the directory at the same time. Code that can sleep may only use d_parent without a reference while something stops a move of the dentry. ovl_iterate_real(), ovl_need_adjust_d_ino() and ovl_cache_update() use the d_parent of the listed directory and hold only the lock of that directory. When a lookup finds the directory under another parent after a change to a layer, d_splice_alias() moves it without that lock and drops its reference on the old parent. With a delay in ovl_iterate_real(), getdents64 on an overlay directory raced a rename in the lower layer and a lookup that moved its dentry, and after an rmdir of the old parent KASAN reported a use-after-free in security_inode_getattr(). Fix this by using dget_parent() in the three functions. [amir: fix comments in ovl_need_adjust_d_ino()]
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.