CVE-20XX-?
agent?

No fix yet.

CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.

7,533 CVEs · updated 2026-11-21 05:13 UTC

Reset all
  1. CVE-2026-99655

    In the Linux kernel, the following vulnerability has been resolved: mm/memory: reject remote COW faults on PFN mappings When handling a COW fault without a normal source page (PFN mappings), __wp_page_copy_user() copies from the faulting user address. For remote faults, this accesses the wrong address space, resulting in wrong data getting copied. For example, user_events updates an enable bit in the registering process's memory. If that memory needs to be faulted in, user_event_enabler_fault_fixup() calls fixup_user_fault() from a work item. Placing the enable bit in a private PFN mapping can trigger this remote COW path. Reject these faults with VM_FAULT_SIGBUS when the target mm differs from current->mm: remote faults. Ordinary (non-PFN) mappings are not affected. The user-address copy dates back to commit 6aab341e0a28 ("mm: re-architect the VM_UNPAGED logic"); likely, actual ways to get remote faults in there on COW PFN mappings appeared afterwards. But the fix is simple and straight forward. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ]

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  2. CVE-2026-99656

    In the Linux kernel, the following vulnerability has been resolved: mm/madvise: fix data loss from MADV_FREE on a KSM page MADV_FREE can clear the dirty flag of a singly mapped KSM folio. The folio remains in the stable tree and can gain new mappings without being dirtied again. Once marked lazyfree, reclaim can discard data that those mappings still need. KSM always marks a folio dirty when converting it to a KSM folio in try_to_merge_one_page(). Marking a folio lazyfree clears PG_swapbacked but leaves PG_dirty unchanged. Preserving PG_dirty makes reclaim restore PG_swapbacked instead of discarding the folio. This also protects folios that were already lazyfree when KSM converted them. Skip KSM folios before clearing their dirty flag, checking under the folio lock to serialize with KSM conversion.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  3. CVE-2026-99626

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref in dcn401_update_clocks_update_dtb_dto [Why] resource_get_otg_master_for_stream() can return NULL if no OTG master pipe is found for a given stream. The current code dereferences this pointer without a NULL check. This may lead to a possible NULL pointer dereference. [How] Add an explicit NULL check and skip the stream if the OTG master is not found. This is similar to dcn60_update_clocks_update_dtb_dto(). Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit ffde3d74c1faeeb645b66d02d02fdae3e073941b)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  4. CVE-2026-99628

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid closing unowned DDC pins [WHY] dal_ddc_open() cleans up pins it acquires on later failures. If the data-pin open fails, this attempt acquired nothing. If opening the clock pin or configuring fails, dal_ddc_open() closes the pins it opened. An extra dal_ddc_close() is unnecessary and unsafe: GPIO_RESULT_ALREADY_OPENED can mean AUX owns the existing handles, and closing them here would disrupt AUX. [HOW] Remove the extra dal_ddc_close() from the failed-open path. (cherry picked from commit 175ae7772b68757b4932f34ff862923cab7abe21)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  5. CVE-2026-99616

    In the Linux kernel, the following vulnerability has been resolved: ovl: look up the index by the decoded origin A file opened by file handle on an overlay with nfs_export=on can show the stale lower data of a file that was copied up to the upper layer. While the file opened this way stays in the inode cache, a lookup of the copied up file by path fails with ESTALE for all users. The open can also succeed for a file that was removed, where it has to fail with ESTALE. This happens with a handle that has one byte changed. The handle comes from an NFS client, or from a process that calls open_by_handle_at() with CAP_DAC_READ_SEARCH in the initial user namespace. When a file in a lower layer is about to be modified, overlayfs first copies it to the upper layer (copy up). With nfs_export=on, each copy up also creates an entry in the index directory, a directory that overlayfs keeps for itself on the upper filesystem. The handle of an overlay file that comes from a lower layer wraps the handle of its lower inode. Overlayfs calls this lower inode the origin. The overlay handle stays valid after a copy up. To decode such a handle, ovl_lower_fh_to_d() first decodes the wrapped handle to the origin. If no overlay inode is cached for the origin, it looks in the index directory: - An index entry there leads to the upper file. - A whiteout, the marker that overlayfs uses for a removed file, means that the overlay file was removed. The name of an index entry is the handle that copy up encoded for the origin, as a hex string. ovl_lower_fh_to_d() builds the name for this lookup from the bytes that the caller passed in. But handles with different bytes can decode to the same inode: - Overlayfs ignores some flag bits of the handle. - A lower filesystem can accept a different fid type, extra bytes, or generation 0 for any generation. Such a handle decodes to the origin but misses the index entry or the whiteout. So the decode returns an overlay inode that has only the lower file. While that inode is cached, a path lookup of a copied up file fails with ESTALE, since the upper file that the lookup finds does not match the cached inode, which has none. Reproduced on tmpfs and on ext4 with open_by_handle_at(), after a copy up and a mount cycle. A handle in which one flag bit, the fid type, the length or the generation was changed read the old lower data, and path lookups returned ESTALE. Fix this by re-encoding the decoded origin and building the index name from that handle.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  6. CVE-2026-99617

    In the Linux kernel, the following vulnerability has been resolved: arm64: mm: validate /dev/mem mmap ranges without overflow An arm64 syzkaller reproducer creates a FUSE character device with major:minor 1:1, so opening it uses the /dev/mem file operations. It maps one page from offset 0xfffffffffffff000 at user address zero. The next openat() with a NULL pathname triggers a synchronous external abort (SEA, ESR 0x96000010) in strncpy_from_user() via do_getname(), panicking the kernel. valid_mmap_phys_addr_range() checks the exclusive end by adding the mapping size to the starting address. For this offset, the sum wraps to zero and passes the PHYS_MASK test, allowing an out-of-range PFN to reach remap_pfn_range(). The inclusive-end overflow check in mmap_mem_prepare() does not catch it because the end is ULONG_MAX. Reject starting PFNs outside PHYS_MASK and compare the inclusive length against the remaining physical range without overflowing. This also allows mappings that end exactly at PHYS_MASK, which the old check incorrectly rejects. [[email protected]: changed the check to look more like __access_ok()]

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  7. CVE-2026-99618

    In the Linux kernel, the following vulnerability has been resolved: nvmet: don't return memory contents beyond valid data when reading ANA log page The host side does not know how much valid data will be returned by the target so it will typically provide a buffer larger than the amount of valid data in the ANA log page. The memory allocation used by the target does not guarantee that prior kernel memory contents will not be returned past the end of the valid page data. Fix this to ensure that the SGL is zeroed before copying the data.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  8. CVE-2026-99619

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't drop the gang dependency fence twice drm_sched_job_add_dependency() drops the fence reference when it fails, but amdgpu_cs_submit() drops it again, so the scheduled fence of a gang member loses a reference it still needs. A GFX+COMPUTE gang waiting for another context, with the xarray node allocation for the leader's dependency failed through failslab: WARNING: drivers/dma-buf/dma-fence.c:589 at dma_fence_release+0x34d/0x730, CPU#1: amd_uapi_regres/2993 drm_sched_job_cleanup+0x2c2/0x340 [gpu_sched] amdgpu_job_free+0xcb/0x3e0 [amdgpu] amdgpu_cs_parser_fini+0x435/0x710 [amdgpu] amdgpu_cs_ioctl+0xcd2/0x7a60 [amdgpu] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:dma_fence_signal_timestamp_locked+0x1b8/0x610 (cherry picked from commit 5aa070a83c8378810b906cc8bfc650ce69822a7c)

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  9. CVE-2026-99610

    In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: free the EP4 URB when input setup fails The three controllers that use the EP4 input URB allocate it before checking the endpoint type and before registering the input device. On failure they jump to exit_free_idev, which clears cdev->input_dev but leaves cdev->ep4_in_urb set. The card teardown then calls snd_usb_caiaq_input_free(), which returns early because input_dev is NULL, so the URB is never freed. Release the URB before dropping the input device on the error path.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  10. CVE-2026-99611

    In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Reject capture buffers smaller than two packets line6_capture_copy() splits the copy into the ALSA ring buffer once at the buffer end and wraps pos_done once, which is only correct when one packet holds at most buffer_size frames. The packet size comes from the device's endpoint, and the per-device hw structs allow 64-byte periods with periods_min 1, so a packet can be larger than the whole buffer. audio_in_callback() logs an oversized packet and then copies it anyway. The packet size is known at probe time, so constrain SNDRV_PCM_HW_PARAM_BUFFER_BYTES in snd_line6_capture_open() to at least twice the larger of the two endpoints' packet sizes. Two rather than one, because pos_done advances by the packet and wraps once, so a buffer of exactly one packet leaves the position unchanged after every packet. hw_params then rejects a buffer that cannot hold two packets, and the single wrap is valid for every configuration that gets through. Keep a guard in line6_capture_copy() that drops an oversized packet with a ratelimited error, for the case that should no longer be reachable. Reproduced on 7.3-rc7 with a USB/IP device presenting the GuitarPort interface layout and 1024-byte packets into a 128-byte buffer: ALSA logged "invalid position: pos = 224, buffer size = 32" and the driver logged "driver bug: len" on every following packet. With this patch a 1024-byte buffer is refused at hw_params, and a 2048-byte buffer streams for 30 s with no report and with the position moving inside the buffer.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  11. CVE-2026-99613

    In the Linux kernel, the following vulnerability has been resolved: ALSA: cs46xx: Handle SCB creation failures before dereferencing With CONFIG_PM_SLEEP enabled, cs46xx_dsp_create_scb() can return NULL if kmemdup() fails to allocate the SCB data saved for resume. cs46xx_dsp_scb_and_task_init() and _dsp_create_generic_scb() dereference the returned pointer without checking it, causing a NULL pointer dereference on allocation failure. Check both return values before accessing the SCB descriptors. Return -ENOMEM when creating the null SCB fails and propagate NULL from _dsp_create_generic_scb(). Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  12. CVE-2026-99594

    In the Linux kernel, the following vulnerability has been resolved: arm64: kexec_file: Fix elf_headers memory leak in retry loop A retry allocates new elf headers and overwrites image->elf_headers, leaking the previous buffer. Free it before assigning. [[email protected]: drop the redundant NULL check before vfree()]

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  13. CVE-2026-99593

    In the Linux kernel, the following vulnerability has been resolved: arm64: sdei: Preserve the interrupted context's exception registers An SDEI event is dispatched by firmware regardless of PSTATE.DAIF, so it can interrupt the kernel where the exception registers are live: - exception entry, before kernel_entry has saved ELR_EL1/SPSR_EL1 and before the C handler has read ESR_EL1/FAR_EL1; - exception return, after kernel_exit has loaded ELR_EL1/SPSR_EL1 and before the ERET. An IRQ or pseudo-NMI cannot arrive there with PSTATE.I set. Firmware saves only x0-x17, PC and PSTATE around an SDEI event, so a synchronous exception taken by the handler overwrites the interrupted context's ELR, SPSR, ESR and FAR. do_sdei_event() only notices that ELR changed, and warns. The interrupted context then carries on with the handler's state. A task interrupted on its way into the kernel can be sent SIGILL for the handler's kernel data abort. A task interrupted on its way back to user space ERETs to EL1, at the handler's fixup address, with user registers loaded. With SDEI delivering NMI backtraces, this happens in normal operation. The handler runs show_regs(), which reads through possibly-NULL pointers with the _nofault() accessors. print_worker_info() faults this way for a kworker that is not running a work item, and a single sysrq-l warned once per such kworker. Save ELR, SPSR, ESR and FAR in __sdei_handler() before irqentry_nmi_enter(), which can take an exception too, and restore them after irqentry_nmi_exit(). Once they are restored, a nested exception is harmless if its handler is safe in NMI context. That holds for EL1 data aborts on translation, permission and access-flag faults, which never take the mmap lock in NMI context, and for BRK. Warn once, with the syndrome, about any other exception class.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  14. CVE-2026-99574

    In the Linux kernel, the following vulnerability has been resolved: f2fs: bound the SIT/NAT bitmaps by the checkpoint pack sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy lengths into and out of sbi->ckpt, which is sized from cp_payload alone, and nothing compares either length against that allocation. sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which added them after a crafted image overran build_sit_info(). That check ties each length to a segment count; it never compares either against the allocation, which is the half this adds. Mounting over-reads in build_sit_info() and build_node_manager(), and the first checkpoint writes the same lengths back through the same pointers, so the over-read's contents reach the on-disk checkpoint. An unmount is enough; the filesystem does not have to be used. Bound both ends the way __bitmap_ptr() lays them out. The three branches differ, so a single sum of the two lengths would still admit a small overflow when cp_payload is non-zero.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  15. CVE-2026-99734

    In the Linux kernel, the following vulnerability has been resolved: mm/shmem: make shmem_file() check the file's inode shmem_file() only checks if file->f_mapping is a shmem mapping. This mapping can belong to another file, however, as with a Coda file backed by a tmpfs container after mmap(). So it does not guarantee that the file inode is an actual shmem inode. Seal handling and memfd preservation use this check before accessing shmem inode state, so they can access an inode of the wrong type. Let's make shmem_file() check the inode's file operations instead, to identify shmem inodes reliably. This will identify regular shmem inodes, including memfds and ordinary tmpfs files, independently of wrapper file operations. Use shmem_mapping() in collapse_file() instead to not change the behavior of collapse_file(): it operates on the page cache and uses mapping->host for shmem inode operations. Focusing on the file does not seem relevant.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  16. CVE-2026-99641

    In the Linux kernel, the following vulnerability has been resolved: ovl: fail the mount if the casefold flag has changed An unprivileged user in a user namespace can repeatedly trigger a kernel warning with their own overlay mounts. They do so by changing the casefold flag of the topmost layer's empty root, the top directory of that layer, after the layers are set and before the mount is created. The casefold flag of a directory makes name lookups in that directory case-insensitive. All layers of an overlay must agree on casefolding. ovl_mount_dir_check() reads the casefold flag of a layer root when fsconfig() sets that layer, and saves the result in ofs->casefold. The mount is created later, by another fsconfig() call with FSCONFIG_CMD_CREATE. The casefold flag of an empty directory can be changed. The casefold flag of the overlay root must match ofs->casefold. ovl_get_root() copies the flag from the topmost layer root, as it is when the mount is created. On a mismatch, ovl_get_root() only does a WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(), so each such mount warns again. An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the casefold option in their namespace. Reproduced by changing the casefold flag of the empty upper directory after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and ext4 layers, and as uid 1000 in a user namespace. Fix this by replacing the WARN_ON() with a check that fails the mount with -EINVAL.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  17. CVE-2026-99612

    In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/tas2781: Only accept CRC-less V1 data if all entries are valid Commit 408249089c48 ("ALSA: hda/tas2781: Accept V1 calibration data without CRC") only checked the first device entry. On machines where the BIOS populates fewer entries than p->ndev, the remaining all-zero entries are applied and tas2781_cali_preproc() divides by zero on playback open. Accept CRC-less V1 data only if every expected entry is non-zero and self-consistent (R0 * 1/R0 close to 1.0), otherwise reject it as before.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  18. CVE-2026-99581

    In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_usbpd_notify: Only use drvdata when parent is GOOG0004 cros_usbpd_notify_probe_acpi() takes the EC device pointer from dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device. That only holds when GOOG0003 is a child of GOOG0004. On older devices without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are siblings under the ACPI EC (PNP0C09): PNP0C09:00 (acpi-ec) |-- GOOG0003:00 (cros-usbpd-notify-acpi) `-- GOOG0004:00 (cros_ec_lpcs) Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform one") the parent platform device had no driver data, so the driver warned and continued without an EC pointer, as intended for these devices. Since that commit the ACPI EC driver stores its struct acpi_ec there, so the driver treats a struct acpi_ec as a struct cros_ec_device and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging or unplugging a charger then intermittently oopses, followed by soft lockups and a hung system: BUG: unable to handle page fault for address: ffffffff9cf03220 #PF: supervisor write access in kernel mode Hardware name: Google Nami/Nami, BIOS 09/19/2019 Workqueue: kacpi_notify acpi_os_execute_deferred RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330 Call Trace: _raw_spin_lock_irqsave+0x59/0x80 __mutex_lock.constprop.0+0x129/0x930 cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto] cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto] cros_ec_cmd+0xb7/0x140 [cros_ec_proto] cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify] acpi_ev_notify_dispatch+0x4e/0x70 acpi_os_execute_deferred+0x1a/0x30 Only read the parent's driver data when the parent's ACPI node is GOOG0004, and otherwise continue without an EC pointer. While at it, drop the reference taken by fwnode_get_parent().

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  19. CVE-2026-99674

    In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  20. CVE-2026-99752

    In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Handle buffer mapping failures when clearing a BO lsdc_bo_clear() ignores the return value from lsdc_bo_kmap() and writes to lbo->kptr unconditionally. When the first mapping of a newly allocated buffer fails, kptr is still NULL and the subsequent memset accesses it. Return the mapping error without touching the buffer and propagate it from lsdc_gem_object_create(). Install the GEM object functions before clearing so that drm_gem_object_put() can release the buffer correctly on failure. Do not add the failed object to the tracking list or return an uncleared buffer to the caller. Imported buffers still skip clearing, and successfully mapped buffers are cleared and unmapped as before. Tested on LS7A2000 with a one-shot range error in ttm_bo_kmap(). Its -EINVAL return reached userspace, the object was destroyed once, and no GEM handle was published. Normal create/map/zero/write/read/close cycles passed, with the tracked BO count and VRAM usage unchanged. AI assistance was used for the lifetime analysis, fix, fault-injection tools, build and test execution.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  21. CVE-2026-99753

    In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Fix double free on BO initialization failure If ttm_bo_init_validate() fails, it drops the buffer object's reference and cleans it up through the supplied destroy callback. lsdc_bo_destroy() releases the GEM object and frees the enclosing lsdc_bo, so freeing it again in lsdc_bo_create() causes a double free on a synchronous failure path. Let TTM own the cleanup after initialization has started and return the error directly. Keep the explicit free on drm_gem_object_init() failure, which occurs before ownership is passed to TTM. Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one selected dumb-buffer creation. The error reached userspace, the destroy callback ran once, and no handle was published or tracked BO retained. Normal buffer creation, zeroing, mapping, readback and release passed. AI assistance was used for the ownership analysis, fix, fault-injection tools, build and test execution.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  22. CVE-2026-99783

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: Fix use-after-free in disable_usb9pfs() disable_usb9pfs() frees the IN and OUT usb_request objects before it disables the corresponding endpoints. If either request is still queued, the later usb_ep_disable() call cancels the endpoint queue and the UDC driver can still access the already freed request. With dummy_hcd and KASAN, this is reproducible by queueing the OUT request and then disconnecting the configfs gadget: BUG: KASAN: slab-use-after-free in dummy_disable+0x2b4/0x300 Read of size 8 at addr ffff888009702400 by task sh/1 usb_ep_disable+0x8e/0x1f0 usb9pfs_func_unbind+0x193/0x350 gadget_dev_desc_UDC_store+0x135/0x280 dummy_free_request() also warns because the request is freed while its queue entry is still linked. Disable both endpoints before freeing the request objects. This lets usb_ep_disable() cancel any queued transfers and invoke the completion callback while the request storage is still valid. The request objects are then freed only after they have been removed from the endpoint queues.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  23. CVE-2026-99784

    In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix refcount leak in p9_xen_response() on wrong tag p9_xen_response() looks up the request for an incoming reply with p9_tag_lookup(), which takes a reference on the returned p9_req_t. When the tag does not resolve to a request in REQ_STATUS_SENT, the function warns and continues the loop without dropping that reference, permanently leaking the p9_req_t and its msize buffers. The reply header, including the tag, is supplied by the backend, so a malicious or buggy 9P backend can leak kernel memory on every crafted response. Drop the reference before continuing.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  24. CVE-2026-99785

    In the Linux kernel, the following vulnerability has been resolved: 9p/trans_virtio: reject mount tags longer than NAME_MAX at probe p9_virtio_probe() reads a 16-bit mount tag length (tag_len) from the device config and kzalloc()s tag_len + 1 bytes for chan->tag with no upper bound. A malicious or compromised host can present a tag of up to 65535 bytes; that tag is later copied into the single-page sysfs buffer by p9_mount_tag_show() (memcpy(buf, chan->tag, tag_len + 1)), a host-controlled out-of-bounds write of up to ~64 KiB past the PAGE_SIZE attribute buffer. Reject an overlong tag at probe time. A 9p mount tag is a name-like identifier, so bound it by NAME_MAX (255): that limit is independent of the sysfs/seq_file page size and is far above any legitimate mount tag, which keeps p9_mount_tag_show() safe at the root without hard-coding a seq_file implementation detail.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  25. CVE-2026-99786

    In the Linux kernel, the following vulnerability has been resolved: xfrm: retry inexact policy lookup after node reinsertion An inexact policy lookup first records pointers to candidate hlist heads and then traverses the lists. A concurrent policy insertion can merge inexact tree nodes between those operations: lookup policy insertion ------ ---------------- find inexact candidates save obsolete hlist head write_seqcount_begin(&bin->count) merge inexact tree nodes hlist_del_rcu(&policy->bydst) reinsert policy->bydst in survivor write_seqcount_end(&bin->count) evaluate saved candidate list miss the moved policy The merge immediately reinserts the same hlist node into the surviving tree node. RCU keeps the policy alive, but it does not provide a consistent view while its list node is moved. A lookup that selected the obsolete list can observe it empty. A lookup already traversing a moved policy can instead follow the next pointer rewritten by the reinsertion. Either case can return an incorrect IPsec policy result. The per-bin sequence counter already brackets calls to xfrm_policy_inexact_insert_node(), including node merges. The read side, however, currently validates the counter only while searching an individual rb-tree. A successful search returns without validation, and the later candidate-list traversal is outside that read-side section. Snapshot the per-bin sequence before discovering candidate heads and validate it after evaluating all candidate lists. Retry the lookup if the inexact policy tree changes while it is being searched.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  26. CVE-2026-99779

    In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: call disable_usb9pfs() from usb9pfs_disable() usb9pfs_disable() is the usb_function ->disable callback, invoked by the composite gadget core whenever the host resets or unconfigures the gadget. The gadget function API requires this callback to disable its endpoints; every other in-tree function driver does so from its ->disable hook. usb9pfs_disable() never called disable_usb9pfs(), so the IN/OUT endpoints and their usb_request objects were left active and allocated across a host-driven disable. When the host later reconfigures the device, enable_usb9pfs() calls alloc_requests() again and unconditionally overwrites usb9pfs->in_req/out_req, permanently leaking the previous allocations, while the endpoints themselves are left enabled underneath the function's own idea of being disabled. Call disable_usb9pfs() before reinit_completion(&usb9pfs->send), mirroring the same sequence already used in p9_usbg_close(). Placing it before the reinit_completion() also ensures usb_ep_disable() has synchronously flushed any requests still queued in hardware before the completion is reset, closing the same race that motivated resetting the completion here in the first place.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  27. CVE-2026-99747

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type() session_user_name() and session_account_type() dereference session->user without checking for NULL. A session can be published and exposed via the procfs session interface before authentication completes, during which session->user is NULL: show_proc_session() -> session_user_name(sess) -> user_guest(session->user) -> NULL->flags -> oops Guard both functions by treating a NULL session->user as an explicit not-yet-authenticated state rather than dereferencing it.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  28. CVE-2026-99787

    In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Select the frequency-invariance callback per CPU cppc_cpufreq_cpu_fie_init() initializes deferred work only for CPUs whose feedback counters use PCC. However, if any CPU in a shared policy uses PCC, it installs the PCC tick callback for the entire policy. With FIE enabled, a non-PCC CPU then queues an uninitialized irq_work and can call a NULL function pointer when that work runs. Choose the frequency-invariance callback separately for each CPU using the recorded work-initialization state. Processor removal can unpublish the CPC descriptor before callback registration, so querying its counter transport again can incorrectly select direct reads for a PCC CPU. Register the callbacks after all counter initialization has completed, so a failed initial read for an online CPU cannot leave a partially registered policy. PCC CPUs use their initialized deferred work, while non-PCC CPUs read their own counters directly from the tick.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  29. CVE-2026-99751

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix skb_pull() BUG in __bpf_redirect_neigh() The issue: This is a follow-up to the short link-layer header fixes from Eric. After vlan pop_eth, a privileged SCHED_ACT BPF program can call bpf_skb_change_head(skb, 1, 0) and then bpf_redirect_neigh(). __bpf_redirect_neigh() calls skb_pull(skb, sizeof(*ethh)) after checking only that mac_header < network_header. Nothing verifies that the MAC header is long enough, that it is linear, or that the IP header the redirect goes on to read is linear either. A SCHED_ACT BPF program can do: bpf_skb_change_head(skb, 1, 0); bpf_redirect_neigh(lo, NULL, 0, 0); after vlan pop_eth. The skb then has mac_len == 1 and only one byte of linear data; skb_pull(ETH_HLEN) trips the skb->len < skb->data_len BUG in __skb_pull(): kernel BUG at ./include/linux/skbuff.h:2839! RIP: skb_pull+0x40/0x50 Call Trace: skb_do_redirect -> packet_xmit -> packet_sendmsg Kernel panic - not syncing: Fatal exception in interrupt The v4 and v6 paths read ip_hdr() and ipv6_hdr() as soon as the MAC header is gone. On the AF_PACKET frame below that leaves headlen == 0 after the pull, so the network header sits at skb->tail and the route lookup reads ip4h->protocol, ip4h->saddr and ip4h->daddr past the linear area. The Fix: Use skb_network_offset(), which is the MAC header span, instead of skb->mac_len. mac_len is zero for locally generated tc egress and netkit packets, while the span still rejects the one-byte header produced by pop_eth + bpf_skb_change_head(skb, 1, 0). The single check also covers the mac_header >= network_header test it replaces. Use pskb_may_pull() to make the Ethernet header linear before it is read or pulled, and to make the IP header linear in both the v4 and the v6 path before ip_hdr()/ipv6_hdr() is read. The header pointers are taken after the pull, since pskb_may_pull() may reallocate skb->head. Conditions to recreate the bug: On x86-64 with 4 KiB pages, enable CONFIG_PACKET, CONFIG_BPF_SYSCALL, CONFIG_NET_SCH_INGRESS, CONFIG_NET_CLS_MATCHALL, CONFIG_NET_ACT_VLAN and CONFIG_NET_ACT_BPF. Run as root with BPF loading, network administration and raw-packet privileges. Bring lo up and attach a SCHED_ACT program that calls bpf_skb_change_head(skb, 1, 0), then returns bpf_redirect_neigh(skb->ifindex, NULL, 0, 0): ip link set lo up tc qdisc add dev lo clsact tc filter add dev lo egress matchall action vlan pop_eth pipe \ action bpf object-file neigh_chghead.o section action Send an untagged ETH_P_IP frame of ETH_HLEN + 8192 bytes through an AF_PACKET/SOCK_RAW socket bound to lo, without PACKET_VNET_HDR or PACKET_QDISC_BYPASS. Use a unicast destination MAC. The sender's skb has a 14-byte linear Ethernet prefix and a fragmented payload; pop_eth removes that prefix and change_head restores only one linear byte. The unfixed neighbor redirect then tries to pull 14 bytes and BUGs. Sending the same frame without pop_eth and change_head leaves the IP header in the frags, which is the route lookup reading past skb->tail.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  30. CVE-2026-99739

    In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate hang in large swap entry Truncating a tmpfs file or memfd to a page-aligned size inside a large swap entry can loop indefinitely in shmem_undo_range(). The task holds the inode lock and cannot be killed. A large swap entry represents a whole swapped-out folio. For example, truncate a file whose pages 0-7 share one swap entry to four pages: [ 0 1 2 3 | 4 5 6 7 ] keep | discard ^ new EOF, start = 4 i_size has already been updated when boundary handling asks shmem_get_partial_folio() for page 4. Since it is swapped out, the helper calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL because its starting offset equals i_size. Nothing is read back. The final scan cannot free the entry without losing pages 0-3. It skips it, restarts from start = 4, and finds it again indefinitely. An unaligned truncate avoids this particular failure because the requested page starts below i_size. Folios already in the page-cache cannot trigger it as the direct lookup will return them beyond EOF. Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio() directly for swap entries. This bypasses the read path's i_size check, allowing the existing boundary handling to zero and split the folio. If swap-in returns a smaller folio, it also splits the swap entry so the final scan can free the entries beyond EOF. Retry the lookup if the entry changes during swap-in. Handling swap-in allocation failures remains broken and is unchanged by this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM instead of -EEXIST, shmem_get_partial_folio() returns NULL and shmem_undo_range() skips boundary handling. If the large swap entry remains intact, truncation can still loop in the final scan, while hole punching can return without zeroing the boundary. This may read an entire large folio back from swap while holding i_rwsem, only to discard part of it. Avoiding that I/O would require splitting both the swap entry and any large folio still in the swap cache. That, however, is much bigger work.

    Denial of service OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  31. CVE-2026-99683

    In the Linux kernel, the following vulnerability has been resolved: vduse: fix VA/PA confusion in the coherent page fault path vduse_domain_get_coherent_page() assumes that iotlb entries above bounce_size were installed by vduse_domain_alloc_coherent(), so it treats map->addr as a physical address. But vduse registers with use_va = true, and when the device is bound to vhost_vdpa, vhost_vdpa_va_map() stores a userspace virtual address in map->addr, which vduse_domain_set_map() then copies into the same iotlb. A process holding the domain file descriptor across a rebind can therefore fault in an arbitrary physical page with read/write access, ignoring the entry permissions. Additionally, since the domain file mmap lacks VM_IO, the domain file itself can be mapped and passed to vhost_vdpa_va_map(), producing self-referential entries that bypass the coherent path check. To fix, only translate entries whose backing file is the domain file itself in vduse_domain_get_coherent_page(), reject such entries in vduse_domain_set_map() since only external mappings should be imported, and set VM_IO on the domain file mmap so vhost_vdpa_va_map() refuses to map it in the first place.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  32. CVE-2026-99579

    In the Linux kernel, the following vulnerability has been resolved: mm/shmem: honour F_SEAL_EXEC when an ACL is set The owner of a memfd sealed with F_SEAL_EXEC can still change its execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL, this lets an unprivileged owner make a non-executable memfd executable, bypassing vm.memfd_noexec=2. simple_set_acl() updates i_mode directly, bypassing the seal check in shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode() in include/linux/memfd.h. Fix generated by an LLM and sent by Chris Mason in private. [ david: use common helper; simplify description ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  33. CVE-2026-99638

    In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  34. CVE-2026-99640

    In the Linux kernel, the following vulnerability has been resolved: ovl: do not let chattr change the casefold flag chattr +F or -F on an overlay directory can make the directory, or the whole mount, unusable. Lookups of the directory, and lookups in it, then fail. From code inspection, the caller only needs to own the directory. The upper filesystem must support casefolding: ext4 or f2fs with the casefold feature, or tmpfs with the casefold option. chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a directory. The flag enables casefolding (case-insensitive name lookup) for the directory. All directories of an overlay must match the casefold state that was recorded at mount time, and ovl_lookup_single() enforces this: - A lookup in a directory that does not match fails with -ESTALE. - A lookup of the directory itself fails with -EREMOTE. ovl_fileattr_set() copies the directory up, which creates it in the upper layer if it only existed in a lower layer. It then passes FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts the change if the upper directory is empty, regardless of what the merged directory contains. The merged directory is the one that the user sees, with the names from the upper and the lower directories. After the change the upper directory no longer matches the mount. If the directory is the root of the overlay, the whole mount is affected. The flag can also change without chattr +F or -F. chattr reads all flags of a directory, changes one and writes all of them back. For a directory that only exists in a lower layer, overlayfs reads the flags from the lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs compares with the mount. So its directories count as not casefolded. With a lower layer on such an xfs and an upper layer on ext4 with the casefold feature, chattr +A on a lower-only directory therefore sets FS_CASEFOLD_FL on the new, empty upper directory. Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an overlay directory whose upper directory was empty. Afterwards lookups below it failed with ESTALE, and lookups of the directory itself failed with EREMOTE. The chattr +A case was seen once, on a kernel with an earlier form of this patch that still passed the caller's flag on: lookups of the directory failed with EREMOTE. Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that can change the flag, asks for a casefold flag on a directory that does not agree with the casefold state of the mount. This also refuses the chattr +A case above. [amir: check the flag against the casefold state of the mount instead of reading back the flags]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  35. CVE-2026-99793

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Only accept connection responses to outstanding requests An outgoing channel waits in BT_CONNECT until security and the feature mask exchange complete, and only then sends its connection request. A peer can answer it before that with a connection response matching our source CID. The channel then moves to BT_CONFIG, completes configuration and becomes connected before security has completed. If security then fails, l2cap_security_cfm() leaves the connected channel alone, so it stays up on a link that did not reach the required security level. A connection response with a zero source CID is matched by identifier. Another channel can hold the same identifier for a response it still has to send, so the lookup can pick the wrong channel. Only accept a connection response while our request is outstanding, and only look at such channels when matching by identifier.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  36. CVE-2026-99742

    In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: charge shared policy nodes Any local user can bypass memory.max with mbind() on a tmpfs file, and allocate unbounded kernel memory. mbind() sets a NUMA memory policy for a range of a mapping. If the mapping is of a shmem and friends, the kernel also stores the policy on the inode, in a tree with one entry per range of the file. Each mbind() on a single page of a mapping can add one shared policy node (struct sp_node) and one struct mempolicy to that tree. They outlive the mapping and stay around until the inode is destroyed. The tree is not bounded by the file size, so the file can be empty. Memory that user space can allocate must be charged to a memory cgroup. A slab cache does that for all of its objects if it is created with SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both structs without SLAB_ACCOUNT, so they are not charged to any cgroup. Reproduced with mbind() on single pages of an empty tmpfs file, from a cgroup with memory.max=8M: the global OOM killer killed tasks owned by root, and the machine panicked. Fix this by creating both caches with SLAB_ACCOUNT. This change implies that mbind() can now fail when running into memcg limits. Further, the policy_cache also serves task and VMA policies, so they are similarly accounted now. Note that per-file limits are not really helpful, as the user could simply use many files; having limits per user is tricky as well. Fix generated by an LLM and submitted by Chris Mason in private. [ david: smaller description tweaks ]

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  37. CVE-2026-99766

    In the Linux kernel, the following vulnerability has been resolved: scsi: aic79xx: Fix NULL pointer dereference in device reset Since commit c67e63800446 ("scsi: aic79xx: Do not reference SCSI command when resetting device") the device reset SCB has no SCSI command, but ahd_linux_dev_reset() still sets its residual, and ahd_abort_scbs(), which completes it, sets its status. Seen on an AIC-7902 when a failing disk triggered a device reset, which killed the SCSI error handler: BUG: kernel NULL pointer dereference, address: 0000009c EIP: ahd_linux_dev_reset.cold+0xee/0x26e Add NULL command checks to the accessors in aic79xx_osm.h. Also skip autosense for an SCB without a command and complete it with ahd_done() right away: the REQUEST SENSE path can clear SCB_DEVICE_RESET, after which ahd_done() would dereference the missing command.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  38. CVE-2026-99758

    In the Linux kernel, the following vulnerability has been resolved: sctp: account for chunk padding in sctp_init_cause() sctp_init_cause() accepts a chunk when skb_tailroom() can hold the cause header and the payload. sctp_addto_chunk() then writes 0-3 bytes of padding before that header so the chunk stays 4-byte aligned. The check does not include the padding, and the following skb_put() calls skb_over_panic() from softirq. Count the padding sctp_addto_chunk() is about to write. The cause length on the wire stays the header plus the payload. Found by LLM inspection, triggered and tested the fix.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  39. CVE-2026-99759

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: don't drop local events queued during TVLV update batadv_tt_tvlv_container_update() read the number of local changes without holding changes_list_lock. batadv_tt_local_event() is not serialized by the commit_lock and can queue new events before the changes_list is flushed: CPU0 CPU1 batadv_tt_tvlv_container_update() num = ...local_changes; batadv_tt_local_event() list_add_tail(...); ...local_changes++; spin_lock_bh(&...changes_list_lock); /* only num events copied but all freed */ The additional events were freed without ever being sent. Other nodes will only notice this via a CRC mismatch and must request the full table. The number of changes and the changes_list must therefore be taken atomically. Events queued afterwards then stay in the tt.changes_list for the next TT round. The changes can no longer be kept for the next round when the TVLV buffer allocation fails. But they would be sent with a skipped TTVN anyway, so the other nodes have to request the full table in this case either way. The last changeset is only dropped in this case when the TTVN was incremented. Without new changes, it still describes the current TTVN. Previously, the unconsumed changes caused a retry of the TVLV container update in the next commit round. Since the changes are now consumed, the next round would only take the path without changes and wait for BATADV_TT_OGM_APPEND_MAX rounds before updating the container again. Until then, the outdated container with the previous TTVN would still be announced. The ogm_append_cnt is therefore reset on failure to retry the update in the next OGM interval. This doesn't make the CRC consistent with the announced changeset. The local table modifications are still not serialized with the commit and batadv_tt_local_transition_new() can still make a client part of the CRC for which the event is only part of the next TT round. Such an inconsistency is detected by the CRC check of the other nodes and solved via a full table request.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  40. CVE-2026-99760

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: ignore ROAM flag of received ADD changes A received TT change (OGM diff or full table response) with the ROAM flag but without DEL is handled by batadv_tt_global_add() like a ROAMING_ADV: * a newly created global entry gets BATADV_TT_CLIENT_ROAM and is therefore excluded from the global CRC. The sender has it in its local CRC and the receiver has to request the full table again * batadv_tt_global_purge_local() removes the local entry of the receiver. The receiver's own client is considered as roamed to the sender and frames for it are rerouted The ROAM flag only has a meaning together with DEL. Drop it on reception to keep it from populating the global table with a temporary ROAMING entry which is not part of the CRC - and therefore causing a CRC mismatch.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  41. CVE-2026-99761

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  42. CVE-2026-99762

    In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: validate tracker padding before forwarding A multicast tracker with an even number of destinations needs two padding bytes after its destination list. batadv_mcast_forw_packet() currently only checks that the count field and the addresses fit in the tracker TVLV. If an unpadded even tracker is compacted to an odd number of destinations, batadv_mcast_forw_shrink_update_headers() includes those missing padding bytes in the amount to remove. The subsequent memmove can then write two bytes past the old packet tail. With no tailroom, this corrupts skb_shared_info. Include the required padding in the existing tracker length check. This rejects the malformed tracker before either received or locally generated packets can reach the compactor.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  43. CVE-2026-99763

    In the Linux kernel, the following vulnerability has been resolved: 9p: don't decrement a server-owned zero nlink A 9P2000.L server can report nlink=0 for a regular file that still exists. On a cache=loose or cache=fscache mount, lookup stores that value with set_nlink(). A later successful unlink calls v9fs_dec_count(), which still calls drop_nlink() for a non-directory. drop_nlink() warns, and the unsigned link count wraps to 4294967295. fstat() on a descriptor opened before the unlink shows 0 before and 4294967295 after. The warning on the unpatched kernel, trimmed: WARNING: fs/inode.c:408 at drop_nlink+0xac/0xd0, CPU#1: trigger/188 CPU: 1 UID: 0 PID: 188 Comm: trigger Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:drop_nlink+0xac/0xd0 Call Trace: <TASK> v9fs_remove+0x529/0x750 vfs_unlink+0x2f0/0xbd0 filename_unlinkat+0x340/0x6c0 __x64_sys_unlink+0x46/0x70 do_syscall_64+0xe8/0x4f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- Directories whose cached nlink is at most 2 already skip this decrement, because the exported filesystem may not maintain nlink (commit ac89b2ef9b559). cache=none skips it as well (commit 574aa0b479947). cache=mmap does not take this path: it sets neither CACHE_META nor CACHE_LOOSE. A regular file on cache=loose or cache=fscache still does. Its count came from GETATTR and may already be zero, so skip the decrement when i_nlink is already 0. Verified on 7.3-rc4-00537-ga3ff15db6820 with only this change. A server that advertises nlink=0 and accepts the unlink no longer warns, and the open descriptor stays at nlink 0. An honest server on the same mount still goes from 1 to 0. A rejected unlink leaves the count unchanged. cache=none is unchanged. With panic_on_warn the unpatched kernel panics on the warning; the patched kernel does not.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  44. CVE-2026-99764

    In the Linux kernel, the following vulnerability has been resolved: 9p/xen: validate the response size from the backend p9_xen_response() takes the length of an incoming response from the ring -- the first field of the 9p header, which the Xen transport reuses as its framing header -- and uses it to advance the consumer index, but never checks that it is at least the header size or no larger than the number of bytes the backend has actually produced. A malicious or buggy backend can post a response whose size is smaller than the header (for example 0). The consumer index then never advances, so the response work re-reads the same ring contents instead of making progress. In testing this raced with the teardown that the malformed reply triggers and dereferenced a freed p9_client: 9pfs 9pfs-0: Wrong req tag=ffff BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Workqueue: events p9_xen_response RIP: 0010:idr_find+0x4/0x10 RSP: 0018:ffffbf5d80063de8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffa229c21195a0 RCX: ffffa229c2400000 RDX: ffffa229c11c2200 RSI: 000000000000ffff RDI: 0000000000000050 RBP: 000000000000ffff R08: 3fffffffffffdfff R09: ffffffffffffffff R10: 3fffffffffffdfff R11: ffffffff87a60e80 R12: 0000000000000050 R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000100000 FS: 0000000000000000(0000) GS:ffffa22a7661c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000003ac34002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> p9_tag_lookup+0x2b/0x90 p9_xen_response+0x17c/0x2e0 process_one_work+0x16a/0x3a0 worker_thread+0x172/0x2e0 kthread+0xdd/0x110 ret_from_fork+0x18b/0x240 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000060 ---[ end trace 0000000000000000 ]--- Reject a response whose size is outside [sizeof(header), queued] before using it, matching the validation the backend already applies to incoming requests.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  45. CVE-2026-99754

    In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  46. CVE-2026-99755

    In the Linux kernel, the following vulnerability has been resolved: ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then list_first_entry() without holding ptp->tsevqs_lock, the spinlock that "protects tsevqs from concurrent access". Every other accessor of the list honours it: ptp_open() (list_add_tail), ptp_release() (list_del followed by kfree of the per-fd queue), ptp_clock_release() and ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only one that does not. A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and removed and freed on close(), both under tsevqs_lock: scoped_guard(spinlock_irq, &ptp->tsevqs_lock) list_del(&queue->qlist); bitmap_free(queue->mask); kfree(queue); So a read of /sys/class/ptp/ptpN/fifo running concurrently with a close() of a /dev/ptpN fd can have list_count_nodes() walk into the queue that close() is removing and freeing, dereferencing freed memory (use-after-free) or a poisoned list pointer. Take tsevqs_lock around the list walk. The fifo only ever draws from the first queue, which is the registration-time queue created in ptp_clock_register() and freed only in ptp_clock_release(); that cannot run while the sysfs attribute is being read, so the dequeue from queue->buf under queue->lock may stay outside tsevqs_lock and the lock order is unchanged.

    Memory safety OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  47. CVE-2026-99757

    In the Linux kernel, the following vulnerability has been resolved: btrfs: sysfs: restore NOFS context on early return in btrfs_sysfs_add_block_group_type() btrfs_sysfs_add_block_group_type() sets up a NOFS context with memalloc_nofs_save() because kobject_add() performs GFP_KERNEL allocations deep in its call chain, and the function may be called while holding a transaction handle or a lock required for a transaction commit, where reclaim could deadlock. Every other return path of this function calls memalloc_nofs_restore() except the early return taken when another thread has already created the kobject for the same raid index (this can happen when restriping). Taking that path leaves PF_MEMALLOC_NOFS set on the calling task, so all subsequent memory allocations performed by that task remain restricted to the NOFS scope, which may lead to unexpected allocation failures or deadlocks later on. Restore the NOFS context before returning from that path.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  48. CVE-2026-99743

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: grant a POSIX ACL group entry only to the group's members When no ACE of the DACL matches the caller, Everyone or Authenticated Users, smb_check_perm_dacl() falls back to the file's POSIX ACL. It takes the first ACL_USER or ACL_GROUP entry whose id equals the caller's uid. For ACL_GROUP, this compares a gid with the caller's uid. A numerical match grants the group's permissions even when the caller is not a member. Match a group entry only when the caller is also in the group.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed
  49. CVE-2026-99744

    In the Linux kernel, the following vulnerability has been resolved: net: atl1c: drop oversized RX frames instead of panicking atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2 overheads, which comes to 1522 bytes at the default MTU. A link partner that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe, whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500 - makes the length reported by the RX return descriptor exceed what the hardware wrote, and skb_put() then either includes bytes that were never received or trips skb_over_panic and takes the host down. Compare the descriptor length against buffer_info->length, the length the hardware was given, rather than against skb_tailroom(): the skb carries 64 bytes of slack for the DMA erratum, so tailroom is larger than the DMA buffer and a frame in between would pass the check and still be delivered with a tail the device never wrote. The same test rejects frames shorter than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below ETH_FCS_LEN underflowed in skb_put(). The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so drop_monitor and the kfree_skb tracepoint see it, and counted through dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats() overwriting the hardware counters on every read. It also counts as work: atl1c_clean_rfd() has already recycled the RFD, and the refill at the end of the poll only runs when work_done is non-zero, so sustained oversized traffic would otherwise drain the ring and stop RX. Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host, with atl1c built from a DKMS tree carrying this change: the l2mtu-1600 traffic that panics the stock driver is dropped and counted with the patch applied, and received normally once the host MTU is raised to match. This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on out-of-range tpd_cons read"), which fixed the TX side of the same "host dies while the card resets" problem.

    Other Network gear Linux

    unscored 0.2% exploit odds No fix listed
  50. CVE-2026-99750

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: require DELETE access for delete-on-close opens smb2_open() accepts FILE_DELETE_ON_CLOSE on an existing file without DELETE in DesiredAccess. When the request asks only for FILE_READ_ATTRIBUTES or READ_CONTROL, it also skips inode_permission() and the parent directory MAY_WRITE | MAY_EXEC check that delete-on-close is meant to get. The file is then marked for deletion by a caller who could not delete it. The unlink happens later, in __ksmbd_inode_close(), when the last handle on the inode is closed, and it runs with the credentials of that handle. If the caller closes last, the unlink fails. If another user who can write the parent directory, such as the file's owner, still has the file open, the file is deleted when that user closes it. Until then new opens of the file fail with STATUS_DELETE_PENDING. So a user with only search permission on a directory can delete a file in it, or block opens of it, while the owner has it open. A MAXIMUM_ALLOWED open that also requests DELETE has the same problem. The requested access is replaced with the maximal access, which does not include DELETE when the caller cannot write the parent directory, and the later permission checks are skipped as already done. MS-FSA 2.1.5.1 requires an open with FILE_DELETE_ON_CLOSE and without DELETE in DesiredAccess to fail with STATUS_INVALID_PARAMETER, and Samba does the same. Add that check to the CreateOptions validation, using the generic-mapped DesiredAccess so that GENERIC_ALL still qualifies. This also refuses MAXIMUM_ALLOWED with FILE_DELETE_ON_CLOSE but no explicit DELETE, as MS-FSA and Samba do. When MAXIMUM_ALLOWED is requested with DELETE but the maximal access does not include DELETE, fail with STATUS_ACCESS_DENIED. With DELETE requested, delete-on-close opens go through the existing parent directory check.

    Other OS & kernel Linux

    unscored 0.2% exploit odds No fix listed

CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.