No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-99342
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration Xen's map_guest_area() enforces that vcpu_info is aligned to sizeof(xen_ulong_t). KVM has no such check, allowing a guest to register vcpu_info at an arbitrary byte alignment. Enforce unconditional 4-byte alignment regardless of the current shinfo mode. This is sufficient because subsequent commits ensure that all locked atomic operations on vcpu_info fields use at most 32-bit accesses. Return -ENXIO on failure, matching Xen's map_guest_area() behaviour for unaligned requests. Originally observed in review of an unrelated patch: https://lore.kernel.org/all/[email protected]/
-
CVE-2026-99343
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access.
-
CVE-2026-99344
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e. mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN unfortunately allows the nonsensical combination, i.e. doesn't fail, but KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME is set. Breaking that invariant can lead to a variety of issue, particularly in MMU code that keys off EFER.LMA when determining whether to emulate/virtualization 4/5-level paging versus PAE paging.
-
CVE-2026-99346
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch When the pCPU where the VMCB was most recently used is switched, reset the ASID generation in both VMCBs, triggering new ASID allocation for the immediate VMRUN as well as the next VMRUN on the other VMCB. The ASID is shared between vmcb01 and vmcb02, and gets flushed on every nested transition. However, since pCPU tracking is done per VMCB, it is possible for one VMCB to allocate a new ASID when migrated to a new pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can result in the same ASID being used by multiple vCPUs on the old pCPU. Example scenario: - vCPU runs on pCPU A, vmcb01 is active, asid=1. - vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2. - Another vCPU runs on pCPU A and allocates asid=2 as well. - vCPU migrates back to pCPU A, and then switches to vmcb02 before it runs again with vmcb01. - No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2. - Two vCPUs end up using asid=2 on the same pCPU. Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its pCPU does not change. Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested enablement as hardening, so that a new ASID allocation is always triggered when nested is disabled and re-enabled. No performance regression was noticed when overcommitting L1 vCPUs in L0 (to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a tight loop bouncing between 2 vCPUs in L2. An alternative (and perhaps more proper) fix would be tracking the ASID per-VMCB instead (e.g. [1]). However, that's a more involved change, and it would result in having different ASIDs for L1 and L2 without actually properly maintaining them. It would probably work because all TLB flushes target the current VMCB, and the other VMCB is always flushed on nested transitions, but the code ends up in an arguably more fragile state. Punt a proper clean fix to an incoming (and overdue) overhaul of SVM's ASID usage [2]. [1] https://lore.kernel.org/lkml/[email protected] [2] https://lore.kernel.org/kvm/[email protected]
-
CVE-2026-99347
In the Linux kernel, the following vulnerability has been resolved: ALSA: x86: hdmi: fix chmap array missing terminator entry had_build_channel_allocation_map() allocates a single struct snd_pcm_chmap_elem via kzalloc() and stores it as intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to be a zero-terminated array (see snd_pcm_std_chmaps[]), but had_register_chmap_ctls() never overrides the TLV callback installed by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from ALSA core is left in place. pcm_chmap_ctl_tlv() is reachable by any local user via SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and walks the array with "for (map = info->chmap; map->channels; map++)". Since the driver's single element is never terminated, this walks past the allocation. The same pointer is also freed on hot-unplug and rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback runs under card->controls_rwsem without that mutex, so the walk can also race a concurrent free of the array. Fix this by allocating a second, zeroed element so the array is properly terminated, and by dropping the inherited TLV callback entirely at registration time, since the driver never implements one of its own.
-
CVE-2026-99332
In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix out-of-bounds left shift by 32 in s32ton() Syzbot reported an out-of-bounds shift (32-bit integer shifted left by 32) in the s32ton() routine in the HID core. This routine converts a signed 32-bit integer to a signed n-bit integer, and it caps the value of n at 32. But when n == 32 there's no need to do anything; it can simply return the input value. This will avoid calculating (1 << n) when n is 32, which was the cause of the invalid shift.
-
CVE-2026-99333
In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports.
-
CVE-2026-99334
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with preemption disabled, because it can return with HPTE_V_HVLOCK still held until the caller later unlocks the HPTE. Existing virtual-mode callers in book3s_64_mmu_hv.c already follow that rule. Two virtual-mode call paths do not: 1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode data-side and instruction-side faults after guest exit, with preemption already enabled. kvmppc_hpte_hv_fault() calls kvmppc_hv_find_lock_hpte() directly. 2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled. The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(), and H_ENTER also reaches kvmppc_do_h_enter(), which uses arch_spin_lock() on kvm->mmu_lock. That raw lock choice is intentional because kvmppc_do_h_enter() is also used by real-mode callers, so the correct fix is to establish the proper preemption context at the virtual-mode caller boundary. If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other thread on the same CPU trying to acquire the same bit-lock can spin indefinitely. The same applies to lock_rmap() users and to the H_ENTER path while holding the raw mmu_lock. Fix this by adding preempt_disable()/preempt_enable() pairs around the two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and around the kvmppc_pseries_do_hpt_hcall() invocation in kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that perform page faults, blocking memory allocations, or context switches.
-
CVE-2026-99335
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Establish memslot<=>guest_memfd bindings *after* memslot is ready Wait to bind a memslot to a guest_memfd instance until *after* the memslot is fully prepared, as creating the binding in guest_memfd will effectively expose the memslot to readers. As pointed out by Sashiko, binding the memslot before it's ready to be exposed to the rest of the world can break various memslot assumption and rules. E.g. x86 could observe a NULL rmap pointer if a PUNCH_HOLE hit the guest_memfd after the binding was created, but before KVM made it through kvm_prepare_memory_region().
-
CVE-2026-99336
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: take the invalidate lock when unbinding a dying file kvm_gmem_unbind() takes mapping->invalidate_lock only if the get_file_active() succeeds. When the guest_memfd file is dying, its reference count is already zero so get_file_active fails and the binding is removed without holding the invalidate lock. kvm_gmem_invalidate_{start,end}() checks f->bindings independently to decide whether to begin or end KVM MMU invalidation. So, the bindings must therefore remain stable between the two calls. Otherwise, unbind can remove a binding after start increments mmu_invalidate_in_progress, but before end finds the binding and decrements it. Example, unbind race with memory failure: CPU 0: memory failure CPU 1: memslot delete ---------------------------------- --------------------------- (guest_memfd file is dying) kvm_gmem_error_folio() kvm_gmem_invalidate_start() finds binding mmu_invalidate_in_progress++ kvm_gmem_unbind() get_file_active() fails removes binding kvm_gmem_invalidate_end() no binding found counter stays elevated mmu_invalidate_retry() then returns 1 forever, so guest page faults retry without ever installing a mapping and the guest hangs. Remove the distinction between live and dying files in the unbind path. Always use slot->gmem.file and take the invalidate lock when it's non-NULL. Normal unbind callers hold slots_lock, which prevents release from clearing the pointer or freeing the file state until unbind completes. Final VM teardown can only see a NULL pointer because guest_memfd pins the KVM until release has cleared all bindings.
-
CVE-2026-99337
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.
-
CVE-2026-99338
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.
-
CVE-2026-99339
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous.
-
CVE-2026-99323
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix invalid pointer dereference when get_inode_acl() fails When get_inode_acl() fails, it returns an ERR_PTR(), but ksmbd_acls_fattr() stored that pointer in smb_fattr without checking for errors. Later callers then passed the error pointer to security descriptor helpers or posix_acl_release(), resulting in an invalid pointer dereference. This was reproduced on an XFS-backed share when xfs_get_acl() returned ERR_PTR(-ENOMEM). Querying the SMB ACL from a CIFS client triggered the crash: BUG: unable to handle page fault for address: fffffffffffffff8 RIP: smb_acl_sec_desc_scratch_len+0x58/0x90 [ksmbd] Call Trace: smb2_query_info+0x40d/0x17c0 [ksmbd] handle_ksmbd_work+0x1ca/0x770 [ksmbd] Fix this by checking the return values from get_inode_acl() in ksmbd_acls_fattr(). Treat -EOPNOTSUPP as indicating that no ACL is available, and propagate all other errors to the callers. Update smb2_open() and smb2_get_info_sec() to handle these errors.
-
CVE-2026-99324
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read when padding the final compound response Compound response handling pads the last response of a compound to an 8-byte boundary by growing the final iov and the RFC1002 length. smb2_allocate_rsp_buf() allocates exactly response_sz. A command can fill the response buffer to within 7 bytes of its end, for example a QUERY_INFO whose output is bounded only by the space left. The padding can then run past the allocation, and ksmbd_tcp_writev() reads those bytes when it sends the response. BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0 Call Trace: _copy_from_iter+0x744/0x10e0 tcp_sendmsg_locked+0x2290/0x3f80 ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd] Allocate room for the padding when the request is a compound, as smb2_read() and smb2_read_pipe() do for their payloads. response_sz is unchanged, so commands still fill only up to it, and kvzalloc() zeroes the padding.
-
CVE-2026-99325
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Add suspend function and gate access under bool. Currently a device can suspend while delayed work is pending or executing. Cancel delayed work if it was pending and restart it if it hasn't run yet. Gate access to show/store functions behind a bool to prevent access prior to cfg_setup() being completed.
-
CVE-2026-99326
In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup hid_gos_cfg_remove() calls a mutex before canceling delayed work. That delayed work function calls mcu_property_out(), which holds the same mutex. Prevent deadlock my removing the mutex prior to stopping the work. Additionally, since cancel_delayed_work has the potential to re-arm, switch to disable_delayed_work.
-
CVE-2026-99327
In the Linux kernel, the following vulnerability has been resolved: HID: roccat: kovaplus: reject short button reports The raw event callback runs before HID core validates and zero-pads the report. It passes the buffer to helpers which inspect data[0] and read a complete struct kovaplus_mouse_report_button for button reports. A truncated report can therefore cause an out-of-bounds read. Require enough data for the button report before calling either helper. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw-event length validation to hid-asus.
-
CVE-2026-99328
In the Linux kernel, the following vulnerability has been resolved: HID: picoLCD: check for fb_deferred_io_init() error fb_deferred_io_init() allocates deferred I/O state, populating info->fbdefio_state, or leaving it NULL if an error occurs. Currently picolcd_init_framebuffer() ignores its return value. Therefore if an error arises in fb_deferred_io_init() (for instance, due to an allocation failure) info->fbdefio_state is left NULL. When the file is subsequently opened, fb_open() will dereference a NULL pointer (calling fb_deferred_io_open()). Fix this by checking for the error. Also correct cleanup ordering - defio is initialised after the sysfs file, so cleanup defio first.
-
CVE-2026-99329
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research.
-
CVE-2026-99330
In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99331
In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus.
-
CVE-2026-99321
In the Linux kernel, the following vulnerability has been resolved: rust_binder: wake epoll on self-work queued to poll thread When a thread pushes work to its own todo list, InnerThread::push_work() returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four call sites in thread.rs discard this return value. As a result, a non-blocking BC_* write that enqueues work onto the calling thread's todo list without also reading will not wake epoll. Check the return value and call self.process.notify_poll(false) when PushWorkRes::OkNotifyPoll is returned. This is similar to commit 97830f3c3088 ("binder: signal epoll threads of self-work"), but in C Binder pending thread work also prevented subsequent process work from waking epoll, causing a permanent hang, which is not the case in Rust Binder. This means that in practice, it merely delays notifications rather than completely failing to send them.
-
CVE-2026-99322
In the Linux kernel, the following vulnerability has been resolved: ksmbd: rebind completed CREATE replays without draining the old channel A completed DurableHandleReqV2 CREATE can be replayed through another channel while its original channel is exiting. The existing replay path returns the open but leaves its connection and oplock references pointing at the old channel. Its open count also stays on that channel, and a later CLOSE through the surviving channel decrements the wrong counter. After checking the owner, lease key and persistent flag, verify that an active open is still published in the requesting session's file table. Do this even when no oplock was granted, and before processing a consumed replay. Do not read a borrowed opinfo session pointer for this check. Keep a healthy original binding. If the original channel is exiting or releasing, move the open and its own oplock references to the requesting channel. Serialize this with CLOSE using the session file-table lock, and with detach, reconnect and notification snapshots using m_lock. The earlier lock index and lease-table changes make their lifetimes independent of this connection change. No old-channel r_count wait is needed, including when an unrelated request remains active there. Account final close against fp->conn in one place, balance durable detach and reconnect, and transfer the count with a replay binding change. A final global lookup put may run after CLOSE has removed the volatile id; unlink the open from the inode list on that final close as well. A live completed CREATE replay may follow a break that lowered the durable open's batch oplock. Apply the batch eligibility check only to detached reconnects, while retaining the owner, lease key and persistent flag checks for active replays.
-
CVE-2026-99319
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.
-
CVE-2026-99314
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.
-
CVE-2026-99315
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Fix NULL dereference at hwdep open and release usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of usb_ifnum_to_if() straight to usb_autopm_get_interface() and usb_autopm_put_interface(), without checking it for NULL. usb_ifnum_to_if() returns NULL once the device is gone, since usb_disable_device() clears udev->actconfig on disconnect. The hwdep file can outlive the disconnect: the card is released with snd_card_free_when_closed(), so a process that keeps the character device open reaches the driver's release callback after the USB configuration has been dropped, and interface_to_usbdev() then dereferences the NULL interface at offsetof(struct device, parent). The open callback has the same problem when it races with the disconnect. Check both lookups and fail the open with -ENODEV; in release, skip the runtime PM put when the interface is already gone and still run the rest of the per-file cleanup. Move the us122l->first bookkeeping after the checks so that a failed open no longer leaves a stale file pointer behind.
-
CVE-2026-99318
In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.
-
CVE-2026-99308
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
-
CVE-2026-99311
In the Linux kernel, the following vulnerability has been resolved: udf: fix return value for non-recorded-allocated extents in udf_map_block() When someone creates a corrupted UDF filesystem where symlink contains other extent type than EXT_RECORDED_ALLOCATED, it can leads to a crash like: Oops: general protection fault KASAN: maybe wild-memory-access RIP: 0010:page_get_link (fs/namei.c:6503) Call Trace: vfs_readlink (fs/namei.c:6419) do_readlinkat (fs/stat.c:583) __x64_sys_readlink (fs/stat.c:605 fs/stat.c:602 fs/stat.c:602) This is because in this case udf_map_block() fails to convert return value of inode_bmap() from 1 to 0. Returned '1' propagates through udf_bread() all the way up to __page_get_link() where it ends up being treated as a folio pointer with obvious results. Move the reset to 0 line outside the if, so udf_map_block() returns either 0 or -errno, even if the extent type is not EXT_RECORDED_ALLOCATED.
-
CVE-2026-99307
In the Linux kernel, the following vulnerability has been resolved: ceph: require the dentry lease record to cover struct ceph_mds_reply_lease parse_reply_info_lease() reads a 32-bit struct_len off the wire and only checks that many bytes are present, without requiring struct_len to cover sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can declare a shorter record and still get the pointer published: the following *p += sizeof(**lease) overshoot is undone by *p = lend, so nothing downstream rejects the reply. ceph_fill_trace() -> update_dentry_lease() then reads 10 bytes through that pointer on any lookup on a mounted CephFS, running past the end of the message front. Require the record to cover the structure, matching the sibling parse_reply_info_dir(). A conforming MDS always encodes the full 10 bytes. BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366 Workqueue: ceph-msgr ceph_con_workfn Call Trace: __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459) ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823) mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 357 bytes inside of allocated 360-byte region [ffff888026c63c00, ffff888026c63d68)
-
CVE-2026-99302
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)
-
CVE-2026-99303
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix NULL pointer dereference on VT switch + selection When selecting/pasting very quickly after VT switch, the tty is not set yet, leading to a NULL dereference. We can just abort the operation.
-
CVE-2026-99298
In the Linux kernel, the following vulnerability has been resolved: net: ipv4: add zero check for snd_cwnd_clamp When RTAX_CWND is locked, user is able to pass 0 into it. This could lead to writing 0 to tp->snd_cwnd, leading to a division by zero error. Oops: divide error: 0000 [#1] SMP KASAN NOPTI Call Trace: <IRQ> tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1)) tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440) tcp_rcv_established (net/ipv4/tcp_input.c:6685) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1)) ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1)) ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262) ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li) __netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4)) __netif_receive_skb (net/core/dev.c:6410) process_backlog (net/core/dev.c:6761) __napi_poll.constprop.0 (net/core/dev.c:7830) net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050) handle_softirqs (kernel/softirq.c:645) __irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758) irq_exit_rcu (kernel/softirq.c:775) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35)) RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482) Fix by checking if user pass in zero as parameter and if lock is present.
-
CVE-2026-99299
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: reject audio endpoint with zero packet size em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize without checking it, so a USB device that declares a zero-sized audio endpoint divides by zero at probe time. Reject a zero-sized audio endpoint like a missing one; the caller already unwinds on a negative return. Oops: divide error: 0000 [#1] SMP NOPTI Workqueue: usb_hub_wq hub_event RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718) Call Trace: em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887) em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258) usb_probe_interface (drivers/usb/core/driver.c:396) ... usb_set_configuration (drivers/usb/core/message.c:2268) usb_generic_driver_probe (drivers/usb/core/generic.c:250) usb_probe_device (drivers/usb/core/driver.c:291) ... usb_new_device (drivers/usb/core/hub.c:2703) hub_event (drivers/usb/core/hub.c:5961) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99300
In the Linux kernel, the following vulnerability has been resolved: media: go7007: only set audio_enabled if go7007_snd_init() succeeded go7007_register_encoder() sets go->audio_enabled before calling go7007_snd_init() and discards its return value. go7007_snd_init() assigns go->snd_context only on success, so a failed ALSA setup leaves audio_enabled set with snd_context still NULL. The disconnect path tests audio_enabled and calls go7007_snd_remove(), which dereferences snd_context unconditionally. go7007_snd_init() returns -ENODEV once its never-decremented static card counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the next attach; no memory pressure is needed. Set go->audio_enabled only once go7007_snd_init() has succeeded. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: usb_hub_wq hub_event RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273) Call Trace: go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336) usb_unbind_interface (drivers/usb/core/driver.c:461) device_remove (drivers/base/dd.c:618) device_release_driver_internal (drivers/base/dd.c:1349) bus_remove_device (drivers/base/bus.c:664) device_del (drivers/base/core.c:3965) usb_disable_device (drivers/usb/core/message.c:1478) usb_disconnect hub_event (drivers/usb/core/hub.c:5966) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
-
CVE-2026-99301
In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.
-
CVE-2026-99293
In the Linux kernel, the following vulnerability has been resolved: fuse: don't BUG when the copy buffer is exhausted fuse_copy_fill() hits BUG_ON(!err) once the iterator backing the copy runs out of pages. Over io-uring the amount copied is not bounded by the payload buffer the server registered, so an unprivileged user can drain the iterator and panic the host - mount a FUSE filesystem with small payload buffers, then setxattr() a larger value: kernel BUG at fs/fuse/dev.c:1064! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 148 Comm: exploit Not tainted 7.3.0-rc1 #2 RIP: 0010:fuse_copy_fill (fs/fuse/dev.c:1033) Call Trace: <TASK> fuse_copy_args (fs/fuse/dev.c:1354 fs/fuse/dev.c:1380) fuse_uring_args_to_ring (fs/fuse/dev_uring.c:891) fuse_uring_prepare_send (fs/fuse/dev_uring.c:940 fs/fuse/dev_uring.c:1057) fuse_uring_send_in_task (fs/fuse/dev_uring.c:1745) tctx_task_work_run (io_uring/tw.c:96) tctx_task_work (io_uring/tw.c:133) task_work_run (kernel/task_work.c:233) io_run_task_work (io_uring/tw.h:84) io_cqring_wait (io_uring/wait.c:278) __do_sys_io_uring_enter (io_uring/io_uring.c:2676) do_syscall_64 (arch/x86/entry/syscall_64.c:61) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The reply path can drain it the same way, via the server-supplied payload_sz in fuse_uring_copy_from_ring(). Return -EIO instead. All three fuse_copy_fill() callers already propagate the error.
-
CVE-2026-99287
In the Linux kernel, the following vulnerability has been resolved: xen-netback: Zero out sring pointers on unmap If xenvif_map_frontend_data_rings() fails when a ring is already mapped, it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the ring pointers unchanged. xenvif_connect_data()'s cleanup path calls xenvif_disconnect_queue() which in turn calls xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the pointers a second time. Zero out the ring pointers after they are unmapped to avoid this issue. This is XSA-532
-
CVE-2026-99286
In the Linux kernel, the following vulnerability has been resolved: xen-netback: Fix XenBus connection failure cleanup xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues under rcu_read_lock. We need to unpublish vif->num_queues before synchronize_net to ensure that readers that come afterwards will not read a non-zero vif->num_queues and attempt to access invalid queues. This is the same cleanup algorithm as used in backend_disconnect and added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus disconnect"). This is XSA-531
-
CVE-2026-99285
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_byteorder: remove multi-register support 64bit byteorder conversion is broken when several registers need to be converted because the source register array advances in steps for 4 bytes instead of 8: for (i = ... src64 = nft_reg_load64(&src[i]); ~~~~~ u32 *src nft_reg_store64(&dst64[i], Remove the multi-register support, it has other issues as well: Pablo points out that commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") alters semantics: before the loop operated on registers, i.e. for ( ... ) dst32[i] = htons((u16)src32[i]) .. but after the patch it will operate on bytes, which makes this useless to convert e.g. concatenations, which store each compound in its own register. Multi-convert of u32 has one theoretical application: ct mark . meta mark . tcp dport @intervalset Because ct mark and meta mark are host byte order, use with intervals has to convert the byteorder for ct/meta mark value to network byte order (bigendian). nftables emits this: [ meta load mark => reg 1 ] [ byteorder reg 1 = hton(reg 1, 4, 4) ] [ ct load mark => reg 9 ] [ byteorder reg 9 = hton(reg 9, 4, 4) ] ... I.e. two separate calls. Theoretically it could be changed to do: [ meta load mark => reg 1 ] [ ct load mark => reg 9 ] [ byteorder reg 1 = htonl(reg 1, 4, 8) ] ... But then all it would take to change the set to meta mark . tcp dport . ct mark ... and we'd be back to two "byteorder" calls. IOW, support to convert a range of registers is both dysfunctional and dubious. Simplify this: remove the feature. Pablo Neira Ayuso points out that nftables before 1.1.0 can generate incorrect byteorder conversions, see 9fe58952c45a, "evaluate: skip byteorder conversion for selector smaller than 2 bytes" in nftables.git). Affected rulesets fail to load with this change and old userspace due to 'len != size' check.
-
CVE-2026-59599
Android on supported Pixel devices before security patch level 2026-11-05 allows elevation of privilege in the hypervisor subcomponent in the kernel, aka A-519434175.
-
CVE-2026-99284
In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker in skb_zerocopy() skb_zerocopy() moves frag descriptors from @from into @to and takes a reference on each frag, but it does not copy skb_shinfo(from)->flags into skb_shinfo(to)->flags. A destination skb holding the same page-cache backed frags as the source therefore reports skb_has_shared_frag() as false. That breaks the invariant relied on by later in-place writers. ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is decrypted in place, letting an unprivileged user write into the page cache of a root-owned read-only file. Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for the other frag-transfer helpers.
-
CVE-2026-99283
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST matches exact sequence") keeps an established conntrack entry in ESTABLISHED when an in-window RST does not match the expected sequence number exactly, so the endpoint can validate the RST with a challenge ACK. The timeout selection nevertheless uses the CLOSE timeout for every RST packet. The bug is that timeout selection is based on the packet type, not on the state transition result: even when RST validation keeps new_state in ESTABLISHED, the timeout is still forced to TCP_CONNTRACK_CLOSE. Linux TCP independently rate limits challenge ACKs per socket. A second non-exact RST can therefore arrive after the first challenge ACK has restored the timeout but before the rate limit expires. The second RST lowers the timeout to 10 seconds again while the endpoint suppresses the second challenge ACK, allowing the conntrack entry to expire while both TCP endpoints remain established. Using the ESTABLISHED timeout for such RSTs would avoid this short expiration window, but it could also retain stale entries for the five-day default because conntrack cannot reliably match the endpoint's exact TCP state. Use the UNACK timeout for RST packets that leave the conntrack entry in TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet trains still fall through to timeouts[new_state], which preserves the CLOSE timeout when conntrack accepts the RST as closing the flow. This avoids the aggressive 10-second expiration window for non-exact RSTs while preserving the short timeout for RSTs that conntrack accepts as closing the flow.
-
CVE-2026-99278
In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.
-
CVE-2026-99275
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short SESSION_SETUP responses smb2_check_message() accepts frames shorter than struct smb2_pdu when the SMB2 status is non-zero, before the minimum-PDU check added by b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP response is therefore accepted even though it cannot contain the SecurityBufferOffset and SecurityBufferLength fields. The parser then reads those fields from stale bytes left in the reused receive buffer by an earlier frame. With a long stale SecurityBufferLength, decode_ntlmssp_challenge() copies up to about 64 KB from beyond the receive object and sends the data back to the server in the NTLMv2 AUTHENTICATE target info. Reject short MPR SESSION_SETUP responses before the short-error path, and validate SecurityBufferOffset + SecurityBufferLength against the received response length before decoding the challenge. The ordering bypass is not new: the short-error early return predates b4694f269e66d, and the unvalidated SecurityBufferLength read predates the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable trees are affected. Reproduced on 6.6.87.2; the path is unchanged on mainline.
-
CVE-2026-99282
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: fix use-after-free on lower qdisc drop The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return value against NETDEV_TX_OK alone. A slave that consumes the skb but returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated as if the skb were still owned, so the loop restores skb->dev and calls __skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit() from its ndo_start_xmit() (propagated since cbbef5e18307), and when the lower qdisc drops the packet that value is NET_XMIT_DROP after the skb has been freed, giving a use-after-free in teql_master_xmit(). The Fix: test for consumption with dev_xmit_complete(), which accepts NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps the packet counted in tx_packets/tx_bytes and advances the slave; a consumed result that is neither a success nor NET_XMIT_CN ends the attempt and is charged to tx_dropped, so lower-qdisc drops are no longer reported as good transmits. NET_XMIT_CN is counted like success because it can accompany acceptance of the current packet: pfifo_head_drop drops the old head, enqueues the current skb and returns NET_XMIT_CN. Conditions to recreate the bug: With CONFIG_NET_SCH_TEQL, CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0 and a teql0 root on lkrvlan0; bring teql0 up with an address and send one UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower qdisc while holding a freed skb.
-
CVE-2026-99271
In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Clear prev_fbuf on capture buffer release A KASAN slab-use-after-free read was reported in submit_audio_out_urb() when generating an impulse test signal: BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline] BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249 Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785 Allocated by task 11: kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144 line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158 line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329 line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728 Freed by task 7785: kfree+0xf8/0x390 mm/slub.c:6566 line6_buffer_release sound/usb/line6/pcm.c:176 [inline] line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170 __line6_pcm_release sound/usb/line6/pcm.c:305 [inline] line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313 snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183 line6pcm->prev_fbuf points into the capture PCM stream buffer (line6pcm->in.buffer), which is updated during audio_in_callback() to feed rate synchronization, software monitoring, and impulse test signal generation on playback side. When all capture streams are closed, line6_buffer_release() frees pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf. If playback is subsequently started (e.g. via impulse test signal volume control snd_line6_impulse_volume_put()), submit_audio_out_urb() dereferences the stale pointer line6pcm->prev_fbuf under in.lock, resulting in a slab-use-after-free read. Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing the capture stream buffer under in.lock, ensuring that no stale buffer pointer can be accessed by submit_audio_out_urb().
-
CVE-2026-99272
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the data area in SMB2_read() SMB2_read() copies le32_to_cpu(rsp->DataLength) bytes from (char *)rsp + rsp->DataOffset without checking that the range lies within the response actually received. A READ response with DataOffset == 0 makes smb2_get_data_area_len() zero the data length, so smb2_check_message() accepts a frame as short as the fixed response, while SMB2_read() still uses the server-supplied DataLength, capped only by CIFS_MAX_MSGSIZE and the caller's length. A malicious server can answer the synchronous read used by the mfsymlinks (or SFU) symlink parser with an 81-byte READ response carrying DataOffset 0 and DataLength 1067, making the client copy 1067 bytes from a 448-byte receive object (KASAN slab-out-of-bounds; up to 16 KiB in the general case). Clamp a zero (or header-overlapping) DataOffset to read_rsp_size, as handle_read_data() does for the asynchronous path, and reject the response unless DataOffset + DataLength fits within rsp_iov.iov_len. The SMB1 helper was fixed the same way in 5be5bdda5863.
-
CVE-2026-99273
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reserve space for the UTF-16 terminator in stream info smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the converted characters, but get_file_stream_info() budgets only sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing "::$DATA" entry. When an entry exactly fills the 448-byte small response buffer, the terminator is written two bytes past the allocation. Reserve one extra UTF-16 unit in both budget checks. The terminator is not part of the wire format, so the reported lengths are unchanged.
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.