No fix yet.
CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.
-
CVE-2026-99594
In the Linux kernel, the following vulnerability has been resolved: arm64: kexec_file: Fix elf_headers memory leak in retry loop A retry allocates new elf headers and overwrites image->elf_headers, leaking the previous buffer. Free it before assigning. [[email protected]: drop the redundant NULL check before vfree()]
-
CVE-2026-99595
In the Linux kernel, the following vulnerability has been resolved: sched/fair: Clear throttle state when leaving the fair class Task-based CFS bandwidth throttling removes a task's fair sched_entity while the scheduler core still considers the task queued. p->throttled carries the fair-specific state across dequeue/enqueue operations. DEQUEUE_CLASS removes the task from cfs_rq->throttled_limbo_list but retains the bit. If the last finite CFS quota is disabled while the task runs in another class, it is absent from the unthrottle walk and the bit survives. Returning to fair while cfs_bandwidth_used() is false then performs a real fair enqueue with p->throttled still set. After bandwidth is re-enabled, a class-change dequeue treats the stale bit as limbo state and skips __dequeue_task(). p->se.on_rq therefore remains set, and put_prev_task_fair() places the entity in the EEVDF tree while the task moves to RT. On exit, the fair picker can select the TASK_DEAD task. __schedule() then returns to do_task_dead(), which hits BUG(). Keep p->throttled across migrations and group moves, but clear it on DEQUEUE_CLASS because fair-specific state must not outlive fair-class membership. A later return to fair uses the normal enqueue path. That path still respects a throttled cfs_rq. A KASAN, LOCKDEP and DEBUG_LIST v7.3 kernel reproduced the do_task_dead() BUG in 3/3 root and 3/3 delegated uid-1000 runs with CapPrm=CapEff=0 and RLIMIT_RTPRIO=1. The fix passed both matrices plus a 3/3 class-switch control with bandwidth continuously enabled, without a scheduler warning, KASAN report, lockdep splat or crash. An AI coding assistant analyzed the state mismatch and drafted the initial reproducer, fix candidate and this changelog. The source paths, trigger, controls and results were rechecked against the cited revisions.
-
CVE-2026-99596
In the Linux kernel, the following vulnerability has been resolved: nvme: wait for SRCU readers before splicing the namespace list Readers walk ctrl->namespaces under ctrl->srcu, and some of them sleep there, e.g. nvme_wait_freeze() waiting for I/O to drain. nvme_remove_namespaces() moves the list onto its on-stack ns_list with list_splice_init_rcu(), which only waits for RCU readers before relinking the entries. A reader still on the last namespace then follows its next pointer to ns_list instead of ctrl->namespaces and treats the stack as a namespace. Deleting a controller while a Format NVM passthrough waits for a delayed read on the last namespace gives: BUG: KASAN: stack-out-of-bounds in nvme_wait_freeze+0x102/0x120 Read of size 8 at addr ff110001d2f3fc38 by task nvme/4413 Call Trace: nvme_wait_freeze nvme_passthru_start nvme_submit_user_cmd nvme_user_cmd nvme_dev_ioctl BUG: unable to handle page fault for address: ffffffff8af04850 Use list_splice_init_srcu() instead, which waits for the SRCU readers. This also takes the RCU grace period out of every controller deletion. Deleting 64 tcp controllers with one namespace each, median of 3 runs on each of two boots per kernel: before after nvme disconnect-all (ms) 3491 / 3509 2996 / 3165 nvme_remove_namespaces() avg (ms) 39.0 / 40.5 31.9 / 34.7
-
CVE-2026-99597
In the Linux kernel, the following vulnerability has been resolved: srcu: Add list_splice_init_srcu() list_splice_init_rcu() makes a list look empty to new readers, waits for the current ones with the given sync function, and only then links the entries into the new list. The sync function takes no argument, so it can wait for RCU readers but not for the readers of an srcu_struct. Passing synchronize_rcu() for a list read under SRCU still builds, but leaves SRCU readers on the entries while the last one's next pointer is moved onto the new list head. nvme_remove_namespaces() does this today. Add list_splice_init_srcu(), which waits for the readers of the given srcu_struct instead.
-
CVE-2026-99598
In the Linux kernel, the following vulnerability has been resolved: MIPS: sgi-ip32: Leave MACE PCI control alone in config accesses mace_pci_read_config() clears the master abort interrupt enable in the MACE PCI control register around each config read. A register read followed by two register writes can hang CRIME 1.1 under DMA load. Ack master aborts in the error register instead, and follow every write with a read so back-to-back accesses cannot form that sequence.
-
CVE-2026-99599
In the Linux kernel, the following vulnerability has been resolved: udf: don't use eloc after the end of the unallocated space table When udf_next_aext() returns 0, its eloc, elen and etype outputs hold no defined value. Two walks of the unallocated space table still use eloc after the walk has reached the end of the table. udf_table_prealloc_blocks() looks for a free extent starting at first_block and decides whether it found one by comparing eloc with first_block after the walk. If the table's list ends in a continuation descriptor that leads to an empty allocation extent, eloc is then the block of that allocation extent, which is in use, and if that is first_block, the block is handed out as preallocation. Once udf_discard_prealloc() no longer frees the wrong block, this is what still makes fsx in generic/091 and generic/263 read back bad data on a table, in about one run in four. Only take the extent if the walk stopped at it. When udf_table_free_blocks() cannot merge the freed blocks into an existing extent, it appends a new one and sets only its block number, so the partition reference comes from whatever eloc held after the walk, and with long allocation descriptors it is written to disk. For a table without extents, eloc was never set. Take the partition reference from the freed blocks instead. Short allocation descriptors do not store the partition reference, which is why this half remains a latent long-descriptor fix rather than a reproduced failure.
-
CVE-2026-99600
In the Linux kernel, the following vulnerability has been resolved: udf: fix preallocation discarding before an empty allocation extent udf_discard_prealloc() finds the last extent of a file by peeking at the next one with udf_next_aext() and stopping when that returns 0. The peek reads into eloc and elen, and the code then uses them as the last extent. But when udf_next_aext() returns 0 they hold no defined value: if the extent list ends in a continuation descriptor that leads to an empty allocation extent, they describe that continuation, i.e. the block of the empty allocation extent, one block long. The kernel creates such lists itself: when udf_delete_aext() removes the only descriptor of the last allocation extent in a list, it leaves that allocation extent empty and the continuation to it in place. If the last extent is a preallocation, udf_discard_prealloc() deletes it with udf_delete_aext(), which finds the following allocation extent empty, so it also removes the continuation and frees that allocation extent's block. udf_discard_prealloc() then frees eloc and elen: that block a second time, instead of the preallocated blocks. On a space bitmap the preallocated blocks leak and the free block count drifts. On an unallocated space table the second free adds a second free extent for the same block, which is later handed out twice: fsx as run by generic/091 and generic/263 ends up with two parts of its test file in one block and reads back bad data. Peek into separate variables, so that eloc and elen keep the last extent that udf_next_aext() returned with 1.
-
CVE-2026-99586
In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Handle ARM erratum for CONT under invalidation with SVA The erratum (MMU-700: #3777127, S3: #3673557) deals with under invalidation of a CONT PTE grouping in the SMMU. The recommended work around is to use a range invalidation that spans the entire CONT. The only user of CONT in the kernel right now is through SVA sharing a CPU page table that contains a CONT created by the mm. Previously it was thought that this errata was dealt with because the driver always uses range invalidation. However, there is a subtle detail in the errata that the invalidation range must fully enclose the entire CONT for it to work. It seems that two sequential range invalidations, with a split point falling inside a CONT grouping, will not prevent the errata. The SMMU's range invalidation generation algorithm does not produce a single invalidation for a single SVA invalidation request, nor does the mm carefully align the SVA invalidation ranges to accommodate the splitting of the invalidation into several ranges. Thus, when processing a SVA invalidation, the range invalidation splitting routine can generate a range invalidation that is split in the middle of the CONT and risk under invalidation from this errata. This condition could be triggered by a malicious userspace manipulating the TLB gathers via mmap/mprotect/munmap. Update the errata list to the include the S3 variation, detect the IOMMUs that have it, and then have SVA invalidations use a simplified version of the over invalidation algorithm from the tlbi rework series. This ensures that a single range invalidation is issued for a single MMU notifier callback and now the range invalidation is guarenteed to cover any posible CONT. Future work to add CONT to iommu_domain page tables should either use this one-invalidate/one-range invalidation algorithm or disable CONT support in the iommu_domain.
-
CVE-2026-99587
In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong.
-
CVE-2026-99588
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: only update flags for TT events In the first implementation of the translation table events, it was only possible to announce: * ADD: new locally detected client * DEL: disappeared local client If an ADD event was queued and then a DEL event was queued in the same timeslot, it is valid to destroy both events because nothing actually changed for remode nodes But with commit 3c4f7ab60cc2 ("batman-adv: improve the TT component to support runtime flag changes") and subsequent changes, it could also happen that there are extra ADD events: * ADD: _NEW_ locally detected client * ADD: already existing client with new flags * DEL: disappeared local client The first and the last type of event could in theory still be removed together from the (to be announced) events queue. But if the "update flags" ADD is dropped together with the DEL, it would still leave global translation table of a remote node in the incorrect state - believing that the client didn't disappear. If a detected client was previously announced, a DEL event must only overwrite the "update flags" ADD but the DEL itself must still continue to exist in the (to be anounced) events queue. For now, adjustment of the announced flags is used for everything instead of dropping already queued up events completely. Similarly, a DEL followed by an ADD caused both entries to be deleted. But the new ADD could announce flags changes which were not yet present for the client before it was marked for DELetion. The new ADD must therefore only overwrite the DEL - but still be kept.
-
CVE-2026-99589
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: clear ROAM flag when re-adding a pending local client When a ROAMING_ADV is received for an announced local client, batadv_tt_local_mark_removed() sets BATADV_TT_CLIENT_ROAM, queues a DEL|ROAM change and marks the entry as BATADV_TT_CLIENT_PENDING. If the client sends a frame again before the next TTVN commit, batadv_tt_local_add_existing() only clears the PENDING flag and returns early. The ADD cancels the queued DEL, but the entry keeps the ROAM flag: * batadv_is_my_client() reports the client as not served by this node * batadv_tt_local_client_is_roaming() reroutes unicast frames for it to the node which sent the ROAMING_ADV The ROAM flag is only removed with the next frame of the client. Since BATADV_TT_CLIENT_ROAM is set together with BATADV_TT_CLIENT_PENDING, it has to be cleared also at the same time with BATADV_TT_CLIENT_PENDING when the client roamed back.
-
CVE-2026-99590
In the Linux kernel, the following vulnerability has been resolved: ceph: clamp the inline data length in ceph_fill_inline_data() The MDS decides how much inline data to attach to a reply, and the client parses inline_len without any upper bound: ceph_decode_need() only verifies that the message actually carries that many bytes. ceph_fill_inline_data() then copies the data into a single folio with no length check, so a malicious or buggy MDS returning more inline data than the folio can hold writes past its end. Clamp the length to folio_size() so both callers, handle_cap_grant() and fill_inode(), are covered.
-
CVE-2026-99591
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Force device table to maximum size IOMMU can perform out-of-bounds read of the device table entry (DTE) that is adjacent to the last DTE and falls outside the device table. For example, if the device table can hold 0 to N-1 entries, then the IOMMU can be made to fetch the Nth entry, which falls outside the device table. The device table is owned by the hypervisor (HV) and is assigned in 4KB pages that are contiguous in system physical address (SPA). If the out-of-bound DTE falls on a guest-owned page, then the guest can exploit this bug to setup malicious table walks to corrupt HV pages and/or bring down the system. Note that this bug does not manifest when the device table size is set to its maximum size of 2MB. Therefore, force the device table size to the maximum 2MB on affected processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a (Zen5/BRH). This is a mitigation for CVE-2024-21963. kdump reuses the previous kernel's device table only when the size encoded in the IOMMU device-table register matches pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched kernel uses the IVRS-derived size and the patched kernel uses 2MB, so __reuse_device_table() rejects the table. On SNP-capable IOMMUs that rejection panics the kdump kernel. Kernels that both have this patch agree on 2MB and reuse succeeds. Update the production kernel and the crash kernel together.
-
CVE-2026-99592
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix global ASID handed out to two processes On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE global ASID value. The two then hit each other's TLB entries, so each can read or corrupt the other's memory. The global ASID space is managed lazily. When a global ASID is freed, its bit is set in the global_asid_freed bitmap. Once the free ASID search reaches the end of the global_asid_used bitmap, a global flush is done to really reclaim the lazily freed global ASIDs. However, the current code can assign the same global ASID to two different processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in use) until the search wraps around again. At that point a third process could also get assigned MAX_ASID_AVAILABLE. the highest ASID stays in use, so it is not handed out again last_global_asid stays below it, so no reset the clear bits run out find_next_zero_bit() returns MAX_ASID_AVAILABLE global_asid_available > 0, so the failure is not caught MAX_ASID_AVAILABLE is handed out as an ASID A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that this value is in use. The next failed search hands it out again, even if the first process still holds it. The fix used here is to reset the global ASID space after a failed search, and to search again. If that search fails too, no global ASID is handed out. The test for !global_asid_available is removed, because use_global_asid() only calls allocate_global_asid() if global_asid_available > 0. The remaining test is for a condition that should be impossible. [ riel: simplify code, massage changelog and comment ]
-
CVE-2026-99593
In the Linux kernel, the following vulnerability has been resolved: arm64: sdei: Preserve the interrupted context's exception registers An SDEI event is dispatched by firmware regardless of PSTATE.DAIF, so it can interrupt the kernel where the exception registers are live: - exception entry, before kernel_entry has saved ELR_EL1/SPSR_EL1 and before the C handler has read ESR_EL1/FAR_EL1; - exception return, after kernel_exit has loaded ELR_EL1/SPSR_EL1 and before the ERET. An IRQ or pseudo-NMI cannot arrive there with PSTATE.I set. Firmware saves only x0-x17, PC and PSTATE around an SDEI event, so a synchronous exception taken by the handler overwrites the interrupted context's ELR, SPSR, ESR and FAR. do_sdei_event() only notices that ELR changed, and warns. The interrupted context then carries on with the handler's state. A task interrupted on its way into the kernel can be sent SIGILL for the handler's kernel data abort. A task interrupted on its way back to user space ERETs to EL1, at the handler's fixup address, with user registers loaded. With SDEI delivering NMI backtraces, this happens in normal operation. The handler runs show_regs(), which reads through possibly-NULL pointers with the _nofault() accessors. print_worker_info() faults this way for a kworker that is not running a work item, and a single sysrq-l warned once per such kworker. Save ELR, SPSR, ESR and FAR in __sdei_handler() before irqentry_nmi_enter(), which can take an exception too, and restore them after irqentry_nmi_exit(). Once they are restored, a nested exception is harmless if its handler is safe in NMI context. That holds for EL1 data aborts on translation, permission and access-flag faults, which never take the mmap lock in NMI context, and for BRK. Warn once, with the syndrome, about any other exception class.
-
CVE-2026-99579
In the Linux kernel, the following vulnerability has been resolved: mm/shmem: honour F_SEAL_EXEC when an ACL is set The owner of a memfd sealed with F_SEAL_EXEC can still change its execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL, this lets an unprivileged owner make a non-executable memfd executable, bypassing vm.memfd_noexec=2. simple_set_acl() updates i_mode directly, bypassing the seal check in shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode() in include/linux/memfd.h. Fix generated by an LLM and sent by Chris Mason in private. [ david: use common helper; simplify description ]
-
CVE-2026-99580
In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: only allocate anon_vma in CoW mappings find_vma_and_prepare_anon() can end up allocating an anon_vma in VMAs that are not CoW mappings, which is wrong. If we have a MAP_SHARED R/O file mapped, we lack VM_SHARED (but do have VM_MAYSHARE) and lack VM_MAYWRITE. While uffd later rejects such mappings (uffd registration requires VM_MAYWRITE, see comment in validate_dst_vma) find_vma_and_prepare_anon() still wrongly allocates an anon vma before it validates the vma. This in turn later confuses copy_page_range()->vma_needs_copy() such that we end up calling copy_hugetlb_page_range() with ranges that actually do not contain *any* per-pagetable information that would require copying, which is the basis for PMD-table sharing in the first place. copy_hugetlb_page_range() should not have to worry about shared PMD tables at all: it doesn't make any sense to copy page tables that are shared, as they can be fully recreated later. Ending up in the function with shareable page tables is the real issue. If a destination PMD table is shared in copy_hugetlb_page_range(), it might get concurrently unshared as we are not holding relevant locks, resulting in us using a page table that is no longer mapped and possibly freed after calling: dst_pte = huge_pte_alloc(dst, dst_vma, addr, sz); To fix it, do not allocate an anon_vma in non-CoW mappings and add a safety guard to copy_hugetlb_page_range(), making sure that we never end up messing with shared PMD tables in there. Before commit 867a43a34ff8a ("userfaultfd: use per-vma locks in userfaultfd operations") we would always validate the VMA before allocating an anon_vma, and consequently never wrongly allocate an anon_vma. As uffd_lock_vma() is part of the same lookup machinery and also contains a misleading VM_SHARED check, change that one as well directly for consistency. A follow-up cleanup will stop taking the hugetlb_vma_lock_read(src_vma) lock in copy_hugetlb_page_range() entirely. Further, the usage of VM_SHARED in userfaultfd code should be cleaned up later to focus on CoW vs. non-CoW mappings.
-
CVE-2026-99581
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_usbpd_notify: Only use drvdata when parent is GOOG0004 cros_usbpd_notify_probe_acpi() takes the EC device pointer from dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device. That only holds when GOOG0003 is a child of GOOG0004. On older devices without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are siblings under the ACPI EC (PNP0C09): PNP0C09:00 (acpi-ec) |-- GOOG0003:00 (cros-usbpd-notify-acpi) `-- GOOG0004:00 (cros_ec_lpcs) Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform one") the parent platform device had no driver data, so the driver warned and continued without an EC pointer, as intended for these devices. Since that commit the ACPI EC driver stores its struct acpi_ec there, so the driver treats a struct acpi_ec as a struct cros_ec_device and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging or unplugging a charger then intermittently oopses, followed by soft lockups and a hung system: BUG: unable to handle page fault for address: ffffffff9cf03220 #PF: supervisor write access in kernel mode Hardware name: Google Nami/Nami, BIOS 09/19/2019 Workqueue: kacpi_notify acpi_os_execute_deferred RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330 Call Trace: _raw_spin_lock_irqsave+0x59/0x80 __mutex_lock.constprop.0+0x129/0x930 cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto] cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto] cros_ec_cmd+0xb7/0x140 [cros_ec_proto] cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify] acpi_ev_notify_dispatch+0x4e/0x70 acpi_os_execute_deferred+0x1a/0x30 Only read the parent's driver data when the parent's ACPI node is GOOG0004, and otherwise continue without an EC pointer. While at it, drop the reference taken by fwnode_get_parent().
-
CVE-2026-99582
In the Linux kernel, the following vulnerability has been resolved: sctp: re-point retained control chunks on association migration sctp_sock_migrate() transfers DATA chunk ownership but leaves retained control chunks pointing at the old socket. A later retransmission can therefore access the socket after it has been freed. Extend the migration walk to cover retained control chunks and use sctp_control_set_owner_w() to assign their new owner. Reuse the DATA ownership check so each chunk is processed once per pass, even when it is reachable through multiple lists or retained pointers. Preserve a control chunk's existing authentication key across migration so its final release can still generate SCTP_AUTH_FREE_KEY when needed.
-
CVE-2026-99583
In the Linux kernel, the following vulnerability has been resolved: sctp: hold shkey across socket migration sctp_sock_migrate() transfers queued DATA skbs from the old socket to the new one. skb_orphan() invokes sctp_wfree() during that transfer and drops the skb-owned shared-key reference. If userspace has removed that key from the association, this can be the final reference. The following sctp_set_owner_w() then dereferences the freed chunk->shkey while trying to take the new owner reference. Take a temporary shared-key reference before orphaning the skb and release it after the new owner has taken its reference. This preserves the selected authentication key throughout the ownership transfer. Bug found and triaged by OpenAI Security Research and validated by Trail of Bits.
-
CVE-2026-99584
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping
-
CVE-2026-99585
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Use kvm_s2_fault_vma_info in gmem_abort() gmem_abort() maps at s2fd->fault_ipa, which HPFAR_EL2 holds at 4K granularity whatever the page size. The generic page-table code aligns it, but pkvm_pgtable_stage2_map() looks up existing mappings over [addr, addr + size), so on a pKVM host with pages larger than 4K a guest_memfd-backed guest that faults past the first 4K of a page can find its neighbour's mapping, get -EAGAIN and take the same fault forever. The memory fault exit reports s2fd->fault_ipa too, which for a nested guest's fault is the nested IPA rather than the canonical one kvm_gmem_get_pfn() failed on. Take the addresses from kvm_s2_fault_vma_info instead, as user_mem_abort() does, and report the canonical gfn in the memory fault exit. kvm_s2_fault_get_vma_info() itself isn't called: a guest_memfd memslot's userspace_addr doesn't need to be backed by a VMA.
-
CVE-2026-99571
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: Validate the queue state under the queue lock in the address attribute Reading the "address" sysfs attribute calls kernel_getsockname() on the admin queue socket, which can race with the queue teardown during connection error recovery: a reader can observe NVME_TCP_Q_LIVE set, then block on the queue lock while nvme_tcp_free_queue() releases the socket and clears queue->sock without holding the lock. Once the reader acquires the lock it dereferences the NULL socket pointer. Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during error recovery") had the queue liveness check inside the lock. Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock and destroy") moved it back out because the lock itself is destroyed in nvme_tcp_free_queue(), so a reader arriving late trips mutex_destroy(). Check the queue liveness inside the queue lock, and clear queue->sock under the same lock. The teardown clears NVME_TCP_Q_LIVE under the lock well before the socket is released, so a reader either sees the bit cleared or a socket that cannot be released while it holds the lock. To also close the lock lifetime race, the queue locks are now owned by the controller: they are initialized with the queue array and only destroyed when the controller is freed, which cannot happen while a sysfs attribute read is still in progress. The queue count is computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original connect options for both initialization and destruction, as reconnects may shrink ctrl->queue_count.
-
CVE-2026-99572
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential reference count leak in do_garbage_collect() In do_garbage_collect(), we have reserved reference counts on summary cache of all segments, once gc_thread encounter freezing, we need to release all reference counts.
-
CVE-2026-99573
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Stop the target vcpu when disabling LPIs Disabling LPIs is pretty nasty, as it directly messes with the AP list of the affected CPU, which could be running... This has the potential to lead to really bad behaviours, and we should not be doing that. Take example on the way the Active state is handled and simply pause the the vcpu so that we are sure it is in a quiescent state, and the state be safely manipulated. Nobody has any expectation of performance for this anyway.
-
CVE-2026-99574
In the Linux kernel, the following vulnerability has been resolved: f2fs: bound the SIT/NAT bitmaps by the checkpoint pack sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy lengths into and out of sbi->ckpt, which is sized from cp_payload alone, and nothing compares either length against that allocation. sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which added them after a crafted image overran build_sit_info(). That check ties each length to a segment count; it never compares either against the allocation, which is the half this adds. Mounting over-reads in build_sit_info() and build_node_manager(), and the first checkpoint writes the same lengths back through the same pointers, so the over-read's contents reach the on-disk checkpoint. An unmount is enough; the filesystem does not have to be used. Bound both ends the way __bitmap_ptr() lays them out. The three branches differ, so a single sum of the two lengths would still admit a small overflow when cp_payload is non-zero.
-
CVE-2026-99575
In the Linux kernel, the following vulnerability has been resolved: f2fs: return -EIO for a lost inode block after cp_error After cp_error, dirty node caches are dropped without being written. If such an inode was never written, its NAT entry is still NEW_ADDR, and reading its inode block returns -ENOENT. f2fs_get_dnode_of_data() passes that -ENOENT up, and callers take it as a hole. Since the inode block is missing, the next offset can only advance one block, so fiemap walks block by block up to maxbytes, about 2^30 blocks, while holding the inode lock. It took hours in a power-off recovery test after shutdown and blocked unlink and umount on the file. Return -EIO instead of -ENOENT when the inode block itself is missing after cp_error or shutdown. A missing direct or indirect node is still reported as -ENOENT.
-
CVE-2026-99576
In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid bio split on sequential zone In the block layer, bio_split_to_limits() splits a bio if it exceeds any underlying queue limits: 1. queue_max_sectors: Splits bios larger than the transfer limit. This limit is set by the device driver/DMA controller (max_hw_sectors) and device-mapper targets. When flushing dirty pages (governed by VFS writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges contiguous pages into bios up to 512KB (1024 sectors) or more without checking queue_max_sectors, which will be split if the device or DM target enforces a smaller limit. 2. queue_max_segments: Splits bios exceeding scatter-gather segment limits. f2fs allocates bios with up to 256 pages, exceeding the 128-segment limit of DM targets (dm-default-key/dm-crypt) if pages are discontiguous. 3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs, section_size strictly matches zone_size, and block allocation never spans across section boundaries, so bios never cross chunk_sectors. Crucially, when bio_split_to_limits() splits a bio, bio_submit_split() submits the tail half via submit_bio_noacct() before returning the head half to the caller. On a sequential zoned device, this causes the tail bio to arrive at the zone write plug before the head: dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048 != wp_offset 248, len 248 The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing f2fs_stop_checkpoint() and remounting the filesystem read-only: 2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5 2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work 2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace: 2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK> 2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70 2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0 2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0 2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0 2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0 2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70 2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140 2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10 2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70 2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30 2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK> 2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3 To prevent write bios destined for sequential zones from being split: 1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to sequential zone areas. 2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors() for sequential zone areas, so f2fs will not merge beyond the queue limits.
-
CVE-2026-99577
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: bound what the driver feeds the after-DTIM queue Frames routed to the high queue are transmitted right after DTIM beacons only, inside the ATIM window, while they wait in the shared TX page pool. The driver puts no limit on how many it hands over, so as long as one station dozes, any sustained broadcast or multicast traffic outruns the drain and empties the pool: measured on an RTL8822BU AP with a single client in power save and ~40 frames/s of mDNS chatter, the free page count at 0x240 goes from 1803 to 16 in about 100 seconds and stays there for as long as the traffic lasts. From that point every other transmit queues behind the backlog, authentication responses arrive too late for anyone to join, and the reserved page download fails ("error beacon valid"). The AP keeps beaconing and only a reboot recovers. Feed the high queue through a small budget that refills below the measured drain rate (about 3 frames per DTIM, ~15/s at dtim_period 2 on the default 2 TU ATIM window); whatever exceeds the budget leaves on its access category queue right away. The high queue backlog is now bounded by the burst size under any load, so the page pool cannot run dry, at the price that a dozing station may miss part of a broadcast storm.
-
CVE-2026-99578
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged.
-
CVE-2026-99566
In the Linux kernel, the following vulnerability has been resolved: assoc_array: keep gc's cleanup out of the live tree on allocation failure assoc_array_gc() builds a copy of the tree. Where the copy reaches a shortcut, it allocates the copy of the shortcut with kmalloc_flex(), fills it with memcpy(), links it into the new tree, and only then allocates the copy of the node after it. The memcpy() leaves the new shortcut's next_node pointing at the old tree's node, so if that second allocation fails, the cleanup, assoc_array_destroy_subtree() on the new tree, follows the new shortcut into the old tree, and the BUG_ON() on the old node's back pointer fires. Allocate the node first, and the shortcut once the node exists, freeing the node again if the shortcut cannot be allocated. A copied shortcut is then only linked into the new tree when the copy of its node is there to follow it. Nothing else changes: with no allocation failing, the trees gc builds are the same as before. Found by a userspace test that makes each allocation of each operation fail in turn.
-
CVE-2026-99567
In the Linux kernel, the following vulnerability has been resolved: assoc_array: don't chain a new shortcut onto an existing one When a full node's leaves and the new key all share the node's segment, assoc_array_insert_into_terminal_node() replaces the node with a shortcut to a pair of new nodes. If the node is itself the target of a shortcut, the new shortcut is installed as that shortcut's next node, and a shortcut leading to a shortcut is something nothing expects: assoc_array_walk() indexes the second one as a node, and assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts nr_leaves_on_branch, on that same insertion. Deletion gets a node there. When the subtree below a shortcut shrinks enough, assoc_array_delete() collapses it into one node below the shortcut, and the leaves it collects can all share that node's segment. The next key that shares it too takes this path. Eighteen insertions and a deletion are enough: sixteen keys that agree on bits 0-11, one that leaves them at bit 8 and is deleted again, and one more that agrees with the sixteen. Have the new shortcut replace the one in front of the node as well. assoc_array_insert_shortcut() gives it that shortcut's back pointer and parent slot, so the caller installs it where that one was, and excises the old shortcut along with the node, which takes a second entry in excised_meta[]. The new shortcut's index key comes from the new key up to the new skip level, so it covers what the old one did. Found by a userspace test doing random insertions and deletions on keys that share long prefixes; a targeted case builds a shortcut, deletes down to the collapse and inserts one more key.
-
CVE-2026-99568
In the Linux kernel, the following vulnerability has been resolved: iommufd/iova_bitmap: Ensure that iova_bitmap_set() handles the full IOVA Generally userspace is going to step the dirty bitmap through the IOVA space. However if the bitmap ends in the middle of a large PTE this is problematic. The first step will clear the dirty bit and report dirty to the end of its bitmap while the second step will see the clear'd dirty and report clean for the start of the bitmap. If it happens this ends up losing dirties. Further this function is missing bounds checking so if this does happen ther is a good chance it will write memory beyond what the userspace was expecting. Return an error code if this illegal condition happens.
-
CVE-2026-99569
In the Linux kernel, the following vulnerability has been resolved: f2fs: release a removed xattr node in roll-forward recovery When xattrs shrink enough to fit in the inline xattr area, write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If the file is then fsynced without a checkpoint, only the inode block is written, with i_xattr_nid of 0. Roll-forward recovery starts from the checkpointed inode, whose i_xattr_nid still points to the old xattr node. f2fs_recover_inline_xattr() copies only the inline xattr area, and f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps the stale xattr node: - The node block is never released, and fsck reports "nonzero bytes in xattr space after end of list". - If the inline xattr list ends exactly at the end of the inline area, its terminator is read from the stale node, and the removed xattrs come back after recovery. When the fsynced inode has no xattr node but the checkpointed one has, release the old xattr node as truncate_node() does: check its block address, invalidate the block and drop its node cache, which may still be dirty.
-
CVE-2026-99570
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to invalidate curseg if change_curseg() fails Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG: F2FS-fs (vdd): Stopped filesystem due to reason: 0 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3989! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI Workqueue: writeback wb_workfn (flush-253:48) RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0 Call Trace: <TASK> do_write_block+0x155/0xc10 f2fs_outplace_write_data+0x192/0x340 f2fs_do_write_data_page+0xc57/0x1880 f2fs_write_single_data_page+0xda9/0x15a0 f2fs_write_cache_pages+0x973/0x1f20 __f2fs_write_data_pages+0x6c4/0x1890 do_writepages+0x21e/0x560 __writeback_single_inode+0x119/0x11b0 writeback_sb_inodes+0x67d/0x17a0 wb_writeback+0x207/0x820 wb_workfn+0x128/0xc30 process_one_work+0x925/0x1600 worker_thread+0x60a/0xff0 kthread+0x35f/0x460 ret_from_fork+0x474/0x7e0 ret_from_fork_asm+0x1a/0x30 </TASK> The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi)) in f2fs_allocate_data_block(), next_blkoff was 512. The root cause is a race in between atomic write commit and shutdown as below: Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback) - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - __f2fs_commit_atomic_write - __replace_atomic_write_block - f2fs_replace_block - __f2fs_replace_block - f2fs_ioc_shutdown - f2fs_do_shutdown : F2FS_GOING_DOWN_METASYNC - f2fs_sync_fs - f2fs_write_single_data_page : pass f2fs_cp_error() check - f2fs_stop_checkpoint : set CP_ERROR_FLAG - change_curseg - reset_curseg : curseg->segno = new_segno : curseg->alloc_type = SSR : curseg->next_blkoff = __next_free_blkoff() which is BLKS_PER_SEG if there is no free slot in new_segno - f2fs_get_sum_cache : return -EIO due to f2fs_cp_error() : return error w/o restoring curseg : goto out_unlock, skip restoring old segno, blkoff and alloc_type - f2fs_do_write_data_page - f2fs_outplace_write_data - do_write_block - f2fs_allocate_data_block : curseg->segno is valid : f2fs_bug_on(next_blkoff >= BLKS_PER_SEG) Since commit 86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg has already been switched to the new segment, then the curseg is left in an inconsistent state: it points to a segment which may have no free slot, its summary block is zeroed, and the caller can not restore it. Subsequent block allocation on the curseg will trigger the BUG. Moreover, the writeback thread dies with curseg_lock, curseg_mutex and sentry_lock held, so the commit, shutdown and other I/O threads hang in D state. Since change_curseg() only fails once CP_ERROR_FLAG is set, no checkpoint will be committed afterward, let's invalidate the curseg via reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC, then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg instead of triggering BUG, and do_write_block() can handle the error since CP_ERROR_FLA ---truncated---
-
CVE-2026-99564
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: don't wait for RDMA_CM_EVENT_DISCONNECTED in smbdirect_socket_destroy_sync() smbdirect_socket_destroy_sync() waited for RDMA_CM_EVENT_DISCONNECTED after smbdirect_socket_cleanup_work() called rdma_disconnect(). That can take very long, e.g. if the peer just disappeared, until the rdma cm gives up, or forever if the event already happened, but the status was overwritten afterwards. This is not needed: smbdirect_socket_destroy() drains the qp under rdma_lock_handler(), destroys it and calls rdma_destroy_id(), which only waits for a currently running event handler and makes sure no further events are delivered. The rest of the disconnect protocol (DREQ/DREP and timewait for IB, abrupt close for iWarp) is handled by the rdma core asynchronously. drivers/nvme/host/rdma.c also just calls rdma_disconnect() and ib_drain_qp() before rdma_destroy_id(). So smbdirect_socket_destroy() now also accepts SMBDIRECT_SOCKET_DISCONNECTING and changes the status to SMBDIRECT_SOCKET_DISCONNECTED itself under rdma_lock_handler(). We could still get RDMA_CM_EVENT_DISCONNECTED in the small windows between rdma_unlock_handler() and rdma_destroy_id(), but in that case smbdirect_connection_rdma_event_handler() is basically a no-op.
-
CVE-2026-99565
In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared.
-
CVE-2026-99556
In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize directory emptiness checks with readdir SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir() on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same filp without that lock. iterate_dir()'s inode read lock permits concurrent readers and does not serialize per-file iterator state. ext4 stores its dx readdir cursor and fname RB tree in file->private_data. Concurrent reset or refill can therefore free a fname node while the other worker still traverses it or retains its RB-tree link, resulting in use-after-free accesses. An authenticated SMB client with list and delete rights on a directory in a writable KSMBD share backed by ext4 can trigger this when the directory takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION on one live FileId. In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at 171df27077fb, the unmodified kernel reported a cross-worker use-after-free before a panic. The first report's access and free stacks show the two request paths directly (trimmed): BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550 Read of size 8 by task kworker/2:0/29 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ext4_htree_store_dirent+0x488/0x550 htree_dirblock_to_tree+0x535/0x990 ext4_htree_fill_tree+0x319/0xba0 ext4_readdir+0x175a/0x2f40 iterate_dir+0x1b6/0x630 smb2_query_dir+0x1003/0x1cc0 Freed by task 279: free_rb_tree_fname+0x67/0xc0 ext4_readdir+0x13a9/0x2f40 iterate_dir+0x1b6/0x630 ksmbd_vfs_empty_dir+0xa2/0x100 smb2_set_info+0x2ffa/0x45d0 Take fp->readdir_lock across the entire emptiness check. This places both iterators over that handle's filp in the same lock domain while preserving the disposition status handling. The exact code change completed a warning-free x86_64 KASAN bzImage build. Tracing three request pairs showed that the two iterate_dir() calls no longer overlapped and the expected statuses were preserved. A further 1,600 reproducer iterations completed with expected statuses and no KASAN report, Oops, or panic. The reproducer and complete guest configuration are available privately to maintainers on request.
-
CVE-2026-99557
In the Linux kernel, the following vulnerability has been resolved: ceph: fail readdir when the MDS reply carries no dirfrag A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR request with a reply whose extra blob is empty. parse_reply_info() skips reply blobs whose length is zero, so parse_reply_info_readdir() never runs, r_reply_info.dir_dir stays NULL, and the reply still parses as successful. ceph_mdsc_do_request() returns 0 and ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check: /* extra */ ceph_decode_32_safe(&p, end, len, bad); if (len > 0) { ... err = parse_reply_info_extra(&p, p + len, req, features, s); ... } The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the mount root after an ms_mode=legacy mount, trimmed: BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:ceph_readdir+0xbff/0x3ea0 Call Trace: <TASK> ? __pfx_ceph_readdir+0x10/0x10 wrap_directory_iterator+0xa2/0xe0 iterate_dir+0x1da/0x5d0 __x64_sys_getdents64+0x13b/0x2a0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The unconditional frag read came in with 81c6aea5275ea ("ceph: handle frag mismatch between readdir request and reply"), so the bug is old. Treat a reply with no dirfrag as a protocol violation: warn once, drop the request and return -EIO, the same way ceph_readdir() already handles the two malformed-reply cases later in the function. Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the getdents64(2) above takes the machine down (oops=panic) on the first READDIR reply. With the patch it warns once and getdents64(2) returns -EIO, no oops, no hang. A conformant reply for an empty directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE — still lists "." and ".." and returns EOF on both kernels, so normal readdir behavior is unchanged. The oops is still present in v7.3-rc5 (72d3fcf802c45).
-
CVE-2026-99558
In the Linux kernel, the following vulnerability has been resolved: blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key() Sashiko reported a possible NULL pointer dereference, triggered by the following flow: dm-inlinecrypt ctor # first use of the fallback ├─ blk_crypto_init_key() # succeeds, ctx->key.size != 0 ├─ blk_crypto_start_using_key() │ ├─ hw-wrapped key: -EOPNOTSUPP │ │ # profile never allocated (NULL) │ └─ raw key: fallback_start_using_mode() │ └─ blk_crypto_fallback_init() fails │ └─ kfree(profile) # not NULLed ├─ goto bad └─ inlinecrypt_dtr() # evicts whenever key.size is set └─ blk_crypto_evict_key() └─ blk_crypto_config_supported_natively() = false └─ blk_crypto_fallback_evict_key() └─ __blk_crypto_evict_key(blk_crypto_fallback_profile) └─ profile->num_slots # BOOM!!! This issue can be reproduced using the following commands: dd if=/dev/zero of=/tmp/backing bs=1M count=64 LOOP=$(losetup -f --show /tmp/backing) SZ=$(blockdev --getsz $LOOP) KEY=$(head -c 64 /dev/urandom | od -An -tx1 | tr -d ' \n') dmsetup create ic --table "0 $SZ inlinecrypt aes-xts-plain64 \ $KEY 0 $LOOP 0 1 keytype:hw-wrapped" And the following oops is triggered: ================================================================== blk-crypto: loop0: no support for wrapped keys Oops: general protection fault, probably for non-canonical address 0xdffffc000000000b: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000058-0x000000000000005f] CPU: 5 UID: 0 PID: 901 Comm: dmsetup 7.3.0-rc3 #1 PREEMPT(lazy) RIP: 0010:__blk_crypto_evict_key+0x2e/0x3b0 Call Trace: blk_crypto_evict_key+0x24c/0x320 inlinecrypt_dtr+0xf6/0x160 inlinecrypt_ctr+0x2d3/0xbd0 dm_table_add_target+0x661/0xf40 table_load+0x1c4/0x490 ctl_ioctl+0x32f/0x5f0 dm_ctl_ioctl+0xe/0x20 ================================================================== dm-inlinecrypt is the only caller that can evict a key that was never started, as fscrypt frees such a key without evicting it. Fix this by returning early from blk_crypto_fallback_evict_key() when tfms_inited[] is not set for the key's mode. tfms_inited[] is only set after blk_crypto_fallback_init() has successfully initialized the profile, so the crash above is no longer reachable. The bug has been latent since commit c984ff1423ae ("blk-crypto: dynamically allocate fallback profile") was merged in v6.5, and only became actually triggerable when commit e7f57d2c47e2 ("dm-inlinecrypt: add target for inline block device encryption") was merged in v7.2.
-
CVE-2026-99559
In the Linux kernel, the following vulnerability has been resolved: ARM: 9524/1: mm: align hugetlb mappings to the huge page size mmap(MAP_HUGETLB) on 32-bit Arm can return an address which is not aligned to the huge page size. In a QEMU virt guest, unmapping the VMA then hits the alignment check in __unmap_hugepage_range(): kernel BUG at mm/hugetlb.c:5213! Internal error: Oops - BUG: 0 [#1] SMP ARM PC is at __unmap_hugepage_range+0x540/0x584 LR is at __zap_vma_range+0x13a0/0x1410 Commit 7bd3f1e1a9ae ("mm: make hugetlb mappings go through mm_get_unmapped_area_vmflags") made hugetlb mappings use the architecture's arch_get_unmapped_area(). The generic implementations handle hugetlb alignment, but the Arm implementations only account for the optional SHMLBA cache-colouring constraint. A 4 KiB-page kernel can therefore align the mapping to 4 KiB or 16 KiB instead of the required 2 MiB. Set the alignment mask from the file's hstate for hugetlb mappings in both Arm implementations. Huge-page alignment also satisfies the SHMLBA constraint.
-
CVE-2026-99560
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask mt7925_irq_map sets wm2_complete_mask, but mt7925_dma_layout has no tx done ring, so the MT_RXQ_MCU_WA queue and its NAPI are never set up. On a chip reset, mt7925e_mac_reset() calls napi_disable() on that NAPI and crashes: BUG: kernel NULL pointer dereference, address: 0000000000000a40 Workqueue: mt76 mt7925_mac_reset_work [mt7925_common] RIP: 0010:mutex_lock+0x1c/0x50 Call Trace: napi_disable+0x1d/0x50 mt7925e_mac_reset+0x327/0x420 [mt7925e] mt7925_mac_reset_work+0x9a/0x1a0 [mt7925_common] Remove the WM2 mask from mt7925_irq_map and from MT7925_INT_RX_DONE_ALL.
-
CVE-2026-99561
In the Linux kernel, the following vulnerability has been resolved: fork: don't create io threads once PF_POSTCOREDUMP is set zap_process() skips every thread that already has PF_POSTCOREDUMP set. Such a thread is past synchronize_group_exit(), so a coredump can't catch it anymore. It isn't counted in core_state->threads_remaining and it isn't sent SIGKILL. do_exit() sets PF_POSTCOREDUMP in synchronize_group_exit() and calls io_uring_files_cancel() right after that. The cancellation runs task work and a create_worker_cb() that io-wq queued before the exit creates a new io-wq worker from there. If another thread started a coredump in the meantime that worker joins a thread-group which is already being dumped. zap_process() never saw it so it was never counted. But when it exits it sees signal->core_state in synchronize_group_exit() and decrements threads_remaining like any other thread. So the count reaches zero one thread early and the dumper leaves coredump_wait_inactive() while a thread it counted is still running. The task has no fatal signal pending because zap_process() deliberately didn't send it one, and it never went through get_signal() so it doesn't have PF_SIGNALED either. Refuse to create an io thread when the creator has PF_POSTCOREDUMP. That costs nothing. io_uring_files_cancel() raises IO_WQ_BIT_EXIT before it runs any task work, so a worker created from there only ever gets to exit again, and io_should_retry_thread() doesn't retry -EINTR. Clearing PF_POSTCOREDUMP for the new thread in copy_process() was the other option. It makes the worker a thread like any other, but it only helps while the dump hasn't started. A worker born after zap_process() has run is invisible to it whatever its flags say and still decrements threads_remaining on the way out. Refusing to create it covers both, and then no task is ever born with the flag, so there is nothing to clear. Moving io_uring_files_cancel() ahead of synchronize_group_exit() closes the same window. It runs the cancellation, and whatever that can block on, before the thread announces itself to the dumper. A thread that blocks there never reaches coredump_task_exit() at all, so the dumper ends up waiting for a thread that never parks. Refusing the creation leaves the cancellation where it is. But it's very ugly to run io_uring work even before we did all the generic exit work.
-
CVE-2026-99562
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle An authenticated client with a writable tree connection can open a directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on a directory FILE_WRITE_DATA is the legitimate add-file right, so the check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the directory file, which has no FMODE_WRITE, and __kernel_write_iter() hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a panic_on_warn kernel. Before commit 25e414db7033 ("ksmbd: report holes in allocated range queries") the dense-file path used vfs_fallocate(), which rejects directories with -EISDIR. The kernel_write() loop that replaced it has no such check. Reject a directory handle in ksmbd_vfs_zero_data() before writing, as ksmbd_vfs_write() already does for SMB2_WRITE. WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: kernel_write+0x1ef/0x4d0 ksmbd_vfs_zero_data+0x413/0x590 smb2_ioctl+0x21fa/0x66a0 handle_ksmbd_work+0x61b/0x1ff0
-
CVE-2026-99563
In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release failed pending sockets of a listener A child of a listener only left the listen.pending or listen.ready list via smbdirect_socket_accept() or when the listener was destroyed. So every connection that failed before it was accepted (negotiate timeout, peer disconnect, invalid negotiate request, ...) stayed on the list and counted against the backlog until the listener was destroyed. After about backlog (10 for ksmbd) such connections smbdirect_listen_connect_request() rejected every new connection with -EBUSY, so an unauthenticated peer was able to permanently stop ksmbd from accepting SMB-Direct connections. Now a failed child moves itself to a new listen.orphaned list at the end of smbdirect_socket_cleanup_work(), after the disconnect was started, and queues listen.purge_orphaned_work, which releases it with smbdirect_socket_release(), without holding the listener's rdma_lock_handler() lock, in the same way smbdirect_socket_destroy() does for the remaining children. Orphaned sockets still count against the backlog until they are released. sc->accept.listener is now only changed under listener->listen.lock and whoever clears it is responsible for releasing the socket: smbdirect_socket_accept(), purge_orphaned_work or the destroy of the listener. In order to make that work: - a struct smbdirect_socket that is a listener is now freed via kfree_rcu(), so that a child can dereference sc->accept.listener under rcu_read_lock(), even if the listener is released concurrently. - smbdirect_listen_connect_request() adds nsc to the listen.pending list and sets nsc->accept.listener before it calls smbdirect_accept_connect_request(), and always returns 0 so the rdma_cm core keeps the connection id and nsc owns it. On a non-zero return it schedules nsc's teardown with smbdirect_socket_schedule_cleanup(), which orphans it off the listener so that purge_orphaned_work releases it; nsc destroys its own connection id with rdma_destroy_id() in that teardown. The teardown has to be deferred because the rdma_cm core holds nsc's id_priv->handler_mutex across the handler, so nsc->rdma.cm_id must not be destroyed synchronously from here. That same handler_mutex (and the listener's) also guarantees nsc can't go away under us, so setting the listener before the call is safe and lets a failure orphan nsc. - smbdirect_accept_negotiate_recv_work() no longer moves a socket to the ready list if it already failed or no longer belongs to the listener. Every accepting socket has a listener, so if sc->accept.listener is already cleared, it no longer sends a negotiate response, as the socket is about to be released. - smbdirect_socket_destroy() of the listener disables purge_orphaned_work and also releases the orphaned sockets.
-
CVE-2026-99548
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix early procfs exposure race Currently, init_cifs() calls cifs_proc_init() near the beginning of the function, before INIT_LIST_HEAD, leading to a momentarily uninitialized, but exposed, procfs. If a userspace process reads this empty procfs, iterating over a zeroed list_head leads to a NULL pointer dereference and a kernel oops/panic. For example, if a delay is added between cifs_proc_init() and INIT_LIST_HEAD, and a userspace process is polling /proc/fs/cifs/DebugData, the following oops occurs: BUG: kernel NULL pointer dereference, address: 0000000000000608 Oops: Oops: 0000 [#1] SMP PTI CPU: 0 UID: 0 PID: 3477 Comm: cat Not tainted 7.3.0-02212-g4df4d2a577db-dirty #6 PREEMPT(lazy) RIP: 0010:cifs_debug_data_proc_show+0x103/0xd80 [cifs] Call Trace: <TASK> ? seq_read_iter+0x86/0x400 ? seq_read_iter+0x86/0x400 seq_read_iter+0x183/0x400 proc_reg_read_iter+0x62/0x90 copy_splice_read+0x215/0x310 splice_file_to_pipe+0xec/0x1c0 do_splice+0x4b8/0x780 __se_sys_splice+0x18f/0x250 do_syscall_64+0x109/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by moving cifs_proc_init() down in init_cifs(), ensuring it runs only after all internal lists, locks, counters, and workqueues are fully ready, but before registering the filesystem. Update the error cleanup ladder and exit_cifs() to maintain proper LIFO order.
-
CVE-2026-99549
In the Linux kernel, the following vulnerability has been resolved: smb: client: do not pass a NULL buf to is_oplock_break() receive_encrypted_read() sets *num_mids = 1 and never writes the caller's bufs[]. Offload returns -1 with *num_mids = 0, so the demultiplex thread skips the frame. The inline decrypt path returns 0 even when smb2_find_mid() fails. cifs_demultiplex_thread() then treats mids[i] == NULL as an oplock break and calls is_oplock_break(bufs[i], server) with bufs[i] still NULL. smb2_is_valid_oplock_break() reads hdr.Command at offset 12 and oopses. A large encrypted READ whose MessageId does not match is enough to panic cifsd. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 100 Comm: cifsd RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs] cifs_demultiplex_thread Kernel panic - not syncing: Fatal exception Return -1 when inline decrypt finds no mid, and skip is_oplock_break() plus the unknown-frame dump when bufs[i] is NULL. receive_encrypted_standard() already assigns bufs[*num_mids].
-
CVE-2026-99550
In the Linux kernel, the following vulnerability has been resolved: ocfs2: pin owning modules for open debugfs files The OCFS2 debugfs file operation tables do not set owner. The full debugfs proxy obtains real_fops with fops_get() at open and keeps it until final release. Without an owner, this does not acquire a reference to the module containing the table and its callbacks. Removing the debugfs entries does not drain retained open files. An open connected_nodes file can therefore outlive ocfs2_nodemanager and make full_proxy_release() read real_fops->release from freed module memory. Heming also reproduced the issue with fs_state and asked for the other OCFS2 debugfs operation tables to be checked. Set owner to THIS_MODULE in all eleven explicit debugfs operation tables: five in ocfs2_nodemanager, four in ocfs2_dlm, and two in ocfs2. The existing debugfs get/put pair then holds the appropriate module until final release. Leave the open, read and release callbacks unchanged. The blockcheck table already sets owner through DEFINE_DEBUGFS_ATTRIBUTE(), so it needs no change. The original controlled test used an unloadable OCFS2 module and case-local probe filters without changing the candidate open, unload or release logic. Closing a retained connected_nodes file after normal unload produced: BUG: unable to handle page fault for address: fffffbfff804cfef Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0xbf/0x190 Call Trace: <TASK> __fput+0x39a/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Modules linked in: [last unloaded: ocfs2_nodemanager]
-
CVE-2026-99551
In the Linux kernel, the following vulnerability has been resolved: ocfs2: drain quorum work before removing the cluster The configured cluster must remain available until an in-flight quorum decision has finished using its fencing method. o2quo_make_decision() drops qs_lock before calling o2quo_fence_self(), which marks heartbeat regions for unclean stop and then reads o2nm_single_cluster->cl_fence_method. Cluster removal clears the singleton without waiting for this independent system-workqueue item. When a failed-quorum decision overlaps removal of the heartbeat regions, nodes and cluster through configfs, the worker can be preempted after marking the regions and resume after the singleton has been cleared: Quorum worker Configfs removal select fence; drop qs_lock o2hb_stop_all_regions() remove regions; join heartbeat threads remove nodes; stop o2net clear singleton; release cluster read cl_fence_method The resumed read dereferences NULL instead of applying the configured fencing method. The heartbeat thread's dependency protects the local node only until the thread exits, and draining o2net does not wait for qs_work. Add o2quo_flush_work() to drain pending or running quorum decisions before clearing the singleton in o2nm_cluster_group_drop_item(). By this point the heartbeat regions and nodes have been removed, so their work publishers are stopped. The worker can finish while the cluster and its configured fencing method remain available. It does not acquire the configfs mutex held by the removal path. Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown and initialization failure, and have it call the same drain helper. Cluster removal uses only the explicitly named drain operation. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df] CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events o2quo_make_decision RIP: 0010:o2quo_fence_self+0x65/0x200 Register dump omitted. Call Trace: <TASK> o2quo_make_decision+0x345/0x3a0 ? __pfx_o2quo_make_decision+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---
-
CVE-2026-99552
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---
CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.