CVE-20XX-?
agent?

No fix yet.

CVEs with no patch, advisory or fixed version linked, ranked by severity and exploit odds.

1,340 CVEs · updated 2026-11-20 20:55 UTC

Reset all
  1. CVE-2026-99696

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after defragmenting a bucket ocfs2_xattr_set_entry_bucket() hands loc.xl_entry to ocfs2_xa_set() twice: once for the bucket as it stands, and, if that reports -ENOSPC, once more after ocfs2_defrag_xattr_bucket() has packed the name/value pairs down. Defragmenting ends by sorting the entry array on xe_name_hash. Buckets are kept sorted, so the sort only permutes entries that share a hash, but lib/sort.c is an unstable heapsort and it does permute them. loc.xl_entry is an address inside xh_entries[], so afterwards it denotes whichever entry landed in that slot rather than the one the search found. The second ocfs2_xa_set() then works on the wrong entry. Nothing on that path compares the entry's name with xi->xi_name, so what happens depends on how the two entries compare in size: ocfs2_xa_reuse_entry() trips its BUG_ON() when the padded name sizes differ, and otherwise the new value is written into the neighbouring attribute's value slot while the attribute being set is left untouched. setxattr() reports success either way. Remember the entry's hash before defragmenting and look the entry up again afterwards, the way ocfs2_xattr_bucket_find() does. An entry that cannot be found again means the bucket no longer holds what the search found, so fail with -EFSCORRUPTED rather than writing through the stale pointer.

    Other OS & kernel Linux

    unscored No fix listed
  2. CVE-2026-99697

    In the Linux kernel, the following vulnerability has been resolved: mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg When memory.high is exceeded in non-task context, try_charge_memcg() schedules memcg->high_work without taking a reference on the memcg, and high_work_func() invokes reclaim_high() without pinning the memcg. With obj_cgroup reparenting, introduced in commit bf4f059954dc ("mm: memcg/slab: obj_cgroup API"), objects charged to a child memcg are reparented to its parent in mem_cgroup_css_offline() instead of holding a reference on the child until uncharged. Subsequent uncharges of those objects go to the parent, which can leave the child's memory use permanently above its high limit, so any later charge on the offlined memcg in non-task context schedules high_work. This was later widened from kernel memory to LRU folios when commit f1cf8d2f36dc ("mm: memcontrol: eliminate the problem of dying memory cgroup for LRU folios") converted LRU folios to use obj_cgroup reparenting. cancel_work_sync(&memcg->high_work) only runs at the end of teardown in mem_cgroup_css_free(), so high_work_func() can start or still be running reclaim_high() after mem_cgroup_css_released() or shrink_many() has called lru_gen_release_memcg() and unhashed lruvec->lrugen.list. If reclaim tries to rotate the memcg, lru_gen_rotate_memcg() dereferences a NULL pprev pointer. This issue is specific to MGLRU and was introduced with the memcg LRU in commit e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists"). With either traditional LRU or MGLRU, css_free_rwork_fn() calls css_rstat_exit() which frees per-CPU rstat data before calling mem_cgroup_css_free(). If reclaim_high() is still running, rstat updates via mod_lruvec_state() -> __css_rstat_updated() cause a use-after-free on the per-CPU rstat data. This was introduced when commit 5da3bfa029d6 ("cgroup: use separate rstat trees for each subsystem") moved css_rstat_exit() ahead of ss->css_free(). Fix both problems by acquiring a reference with css_tryget_online() in high_work_func() before calling reclaim_high(), and by resetting memory.high and swap.high to PAGE_COUNTER_MAX in mem_cgroup_css_offline() so that charges via references on an offlined memcg do not trigger high_work on the dead child and skip checking live ancestors in try_charge_memcg(). Acquiring the reference in high_work_func() rather than before scheduling high_work is safe because mem_cgroup_css_free() calls irq_work_sync() and cancel_work_sync() which cancels pending work and waits for an already running high_work_func() to complete before mem_cgroup_free() frees the memcg. css_tryget_online() uses percpu_ref_tryget_live() and is safe to call after percpu_ref_exit() before the cgroup is freed unlike css_tryget(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 27 Comm: kworker/1:0 Tainted: G B W 7.3.0-rc5-g2bba28e98578 #284 PREEMPT(full) Tainted: [B]=BAD_PAGE, [W]=WARN <-- Taint from lru_gen_rotate_memcg() VM_WARN_ON_ONCE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events high_work_func RIP: 0010:lru_gen_rotate_memcg+0x1a3/0xe90 Call Trace: <TASK> ? read_ctrl_pos+0x22f/0x3f0 shrink_lruvec+0x16cb/0x1b80 ? ret_from_fork_asm+0x1a/0x30 ? lapic_next_event+0x15/0x20 ? clockevents_program_event+0x2bb/0x6f0 ? lapic_next_event+0x15/0x20 ? __pfx_shrink_lruvec+0x10/0x10 ? __pfx_clockevents_program_event+0x10/0x10 ? _raw_spin_lock+0x84/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? kasan_save_stack+0x30/0x50 ? psi_group_change+0x381/0x740 ? __pfx_sched_clock_cpu+0x10/0x10 ? save_fpregs_to_fpstate+0xc4/0x2c0 ? finish_task_switch.isra.0+0x1de/0xac0 ? __schedule+0xf62/0x42c0 ? __pfx___schedule+0x10/0x10 ? __pfx___irq_work_queue_lo ---truncated---

    Memory safety OS & kernel Linux

    unscored No fix listed
  3. CVE-2026-99698

    In the Linux kernel, the following vulnerability has been resolved: mm/cma: accept memory of CMA areas reserved at a fixed address CMA areas allocated from memblock have their memory accepted by memblock_alloc_range_nid(), but areas reserved at a fixed address with memblock_reserve() are not. If a fixed CMA area is requested by the cma=<size>@<base> command line parameter, it may be in regular RAM and on TDX and SEV-SNP guests it must be accepted. Accept the memory of fixed CMA areas as well, so that all CMA areas are accepted regardless of how they were reserved.

    Other OS & kernel Linux

    unscored No fix listed
  4. CVE-2026-99700

    In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb_vmemmap: map the shared tail page writable page_ref_add_unless_zero() reads the refcount and then updates it with a cmpxchg. A lockless get, such as a page cache lookup or a PFN scanner, can read a non-zero refcount from a page that is then freed and reused as a hugetlb tail page. If HVO remaps its struct page to the shared tail page in between, the cmpxchg writes to read-only vmemmap: CPU0 (lockless get) CPU1 c = atomic_read(&page->_refcount) page freed page allocated as a hugetlb tail HVO remaps the struct page RO try_cmpxchg(&page->_refcount, &c, c + 1) -> write fault on read-only vmemmap The refcount is zero by then and the compare fails, but a compare-and-swap instruction needs write access whether or not it succeeds. The kernel oopses when hugetlb pages are allocated at runtime with HVO enabled while a lockless get races with it. Commit bd225530a4c7 ("mm/hugetlb_vmemmap: fix race with speculative PFN walkers") closed the window with RCU on both sides. The RCU was removed together with fake heads, on the wrong belief that it was only needed for them. Map the shared tail page writable instead of restoring the RCU. Every struct page on it is a tail with a zero refcount, so a late cmpxchg fails and leaves the page unchanged. RCU would put rcu_read_lock() back around every get and synchronize_rcu() back into hugetlb allocation and freeing. The cost is the protection against stray writes to tail struct pages. The shared page is shared by all hugetlb folios of the same order in the zone, so such a write now corrupts all of them instead of oopsing. Bootmem folios optimized when the memmap is set up keep their tails read-only. Nothing does a lockless get on them before hugetlb takes them over.

    Other OS & kernel Linux

    unscored No fix listed
  5. CVE-2026-99701

    In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix userfaultfd protection during merge and unmerge KSM loses userfaultfd protection when replace_page() builds a new PTE from vma->vm_page_prot. Dropping its uffd bit lets a subsequent write go through ordinary COW instead of userfaultfd write protection handling. For RWP, a merged page also becomes readable without faulting. Keeping the uffd bit and restoring PAGE_NONE fixes merging, but we also have to handle unmerging. An existing KSM page can be protected with RWP before MADV_UNMERGEABLE, so unmerging already needs fixing independently of preserving RWP during merging. Unsharing replaces a shared page with a private one and should leave userfaultfd protection in place, as do_wp_page() already does for write protection. Currently, an unshare fault reaches do_uffd_rwp() before it can proceed to do_wp_page(). - With synchronous RWP, handle_userfault() returns VM_FAULT_SIGBUS. break_ksm() then reports success with a KSM page still merged. - With asynchronous RWP, protection is cleared before unsharing. Preserve the uffd bit when merging, and restore PAGE_NONE for RWP. Let FAULT_FLAG_UNSHARE skip RWP fault handling and keep PAGE_NONE on each private copy as well. Unsharing can then complete with RWP still armed for a subsequent access.

    Other OS & kernel Linux

    unscored No fix listed
  6. CVE-2026-99702

    In the Linux kernel, the following vulnerability has been resolved: mm/vma: write lock source VMA before duplicating it in __split_vma() __split_vma() duplicates the source VMA before taking its VMA write lock, and until the VMA is write-locked, a concurrent thread might set VMA_MAYBE_GUARD_BIT, resulting in the duplication missing the flag. If this happens, then fork may fail to duplicate guard markers and, if a file-backed mapping, THP collapse may also discard the markers. Resolve this by taking the VMA write lock before vm_area_dup() and, since all callers of vm_area_dup() now hold the VMA write lock, assert that this is the case there, and add a comment to explain why it's needed. [[email protected]: add VMA write assert in vm_area_dup(), commit message touchup]

    Other OS & kernel Linux

    unscored No fix listed
  7. CVE-2026-99690

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released.

    Other OS & kernel Linux

    unscored No fix listed
  8. CVE-2026-99691

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: unlink socket containers before releasing resources A socket container's node and socket must remain alive while the container is on sock_containers. The debugfs formatter reads sc_node and sc_sock under o2net_debug_lock without taking their references, but sc_kref_release() releases both before taking that lock to unlink the container. With CONFIG_DEBUG_FS enabled, a synchronous sender can retain its last socket-container reference after o2net_disconnect_node() has detached the connection and flushed o2net_wq. The caller runs outside that workqueue. After the sender removes its configfs dependency, node removal can proceed without waiting for the sender's final sc_put(): Sender (final sc_put) Configfs rmdir Debugfs reader -------------------- -------------- -------------- o2nm_undepend_item() Drop node item refs o2nm_node_put() [node can be freed] sc_seq_show() Lock debug lock Read sc_node->nd_name Unlock debug lock sc_node = NULL o2net_debug_del_sc() The earlier socket release has a similar window. The container is still selectable while its socket has been released and sc_sock has not yet been cleared: Sender (final sc_put) Debugfs reader -------------------- -------------- sock_release(sc->sc_sock) [socket can be freed] sc_seq_show() Lock debug lock Read sc_sock->sk fields Unlock debug lock sc_sock = NULL ... o2net_debug_del_sc() Move o2net_debug_del_sc() before releasing either resource. Unlinking under the existing debug lock waits for an active formatter to finish and prevents later readers from selecting the container. This covers both socket fields and node fields, including nd_num in the stats formatter. KASAN report as below: BUG: KASAN: slab-use-after-free in string+0x42b/0x470 Read of size 1 at addr ffff88810f56fc90 by task python3/506 CPU: 0 UID: 0 PID: 506 Comm: python3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 kasan_report+0xe0/0x110 string+0x42b/0x470 vsnprintf+0x330/0x1110 seq_printf+0x1a8/0x260 sc_seq_show+0x604/0x9f0 seq_read_iter+0x480/0x1110 seq_read+0x362/0x5a0 full_proxy_read+0x11f/0x180 vfs_read+0x1a0/0xc20 ksys_read+0x111/0x200 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f (User register dump omitted.) </TASK> Allocated by task 497: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 o2nm_node_group_make_item+0xea/0x1a0 configfs_mkdir+0x762/0xca0 vfs_mkdir+0x399/0x7e0 filename_mkdirat+0x129/0x450 __x64_sys_mkdir+0x70/0xa0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 505: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 config_item_cleanup+0x14b/0x230 config_item_put+0x79/0x90 sc_put+0x454/0x6e0 o2net_send_message_vec+0x63d/0x1560 o2net_send_message+0xa6/0xe0 validation_send_write+0x17f/0x1d0 full_proxy_write+0x11f/0x180 vfs_write+0x25a/0x1010 ksys_write+ ---truncated---

    Memory safety OS & kernel Linux

    unscored No fix listed
  9. CVE-2026-99692

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: stop recovery before shutting down local allocators Recovery completion needs the local allocators until it has finished reclaiming a failed node's allocation window and truncate log. During unmount, quota recovery is stopped first, but that leaves recovery_state at OCFS2_REC_QUOTA_DISABLED. New non-quota recovery can still start. ocfs2_truncate_log_shutdown() drains existing completion work and releases osb_tl_bh before ocfs2_recovery_exit() closes that publication path: Unmount Recovery ------- -------- stop quota recovery; disable quotas truncate_log_shutdown() flush existing completion work recover another failed node queue completion flush local log; release buffer complete_truncate_log_recovery() use released osb_tl_bh recovery_exit(): disable and drain An extra buffer reference alone would still let completion append new records after the final truncate-log flush. Split stopping and draining recovery from freeing its state. Stop all recovery producers and drain completion work before shutting down either local allocator. Keep recovery-state release at its existing later point, so its lifetime relative to other teardown users stays unchanged. The second stop at recovery_exit() is harmless once recovery is disabled. KASAN report as below: BUG: KASAN: slab-use-after-free in ocfs2_truncate_log_needs_flush+0x23d/0x360 Read of size 8 at addr ffff8881093711e8 by task kworker/u16:3/53 CPU: 0 UID: 0 PID: 53 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ocfs2_wq ocfs2_complete_recovery Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? ocfs2_truncate_log_needs_flush+0x23d/0x360 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? ocfs2_truncate_log_needs_flush+0x23d/0x360 kasan_report+0xe0/0x110 ? ocfs2_truncate_log_needs_flush+0x23d/0x360 ocfs2_truncate_log_needs_flush+0x23d/0x360 ? __pfx_ocfs2_truncate_log_needs_flush+0x10/0x10 ? __pfx_down_write+0x10/0x10 ocfs2_complete_truncate_log_recovery+0x315/0x780 ? trace_hardirqs_on+0x18/0x160 ? __pfx_ocfs2_complete_truncate_log_recovery+0x10/0x10 ? ocfs2_complete_recovery+0x666/0x11b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? kfree+0x308/0x580 ocfs2_complete_recovery+0x676/0x11b0 ? __pfx_ocfs2_complete_recovery+0x10/0x10 ? reacquire_held_locks+0xdd/0x200 ? process_one_work+0x7c8/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x190/0x300 ? __pfx_autoremove_wake_function+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 538: kasan_save_stack+0x33/0x60 kasan ---truncated---

    Other OS & kernel Linux

    unscored No fix listed
  10. CVE-2026-99693

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: serialize migration MLE cleanup on failure A migration MLE has a base reference for the mastering answer and an in-use reference held by dlm_migrate_lockres(). The finishing assertion consumes the base reference, but migration failure drops it again without checking whether the assertion already consumed it. The target queues its migration worker before it acknowledges the ALL_DONE packet, so its finishing assertion can be handled while the sender still waits for the status. If the connection fails before the status arrives, dlm_send_one_lockres() returns an error for a migration that the target has already completed: Old-master sender Finishing assertion ----------------- ------------------- publish MLE; take in-use reference send ALL_DONE; wait for status take lookup reference unlink MLE put lookup and base references send returns a connection error put base reference again; free MLE put in-use reference; access freed MLE dlm_assert_master_handler() holds dlm->spinlock from the MLE lookup to the final puts, and it takes dlm->master_lock around the unlink and the puts. Decide under the same locks: if the MLE is already unhashed, the assertion consumed the base reference, so drop only the sender's in-use reference. Otherwise unlink it before consuming the base reference so a later assertion no longer finds it. An assertion that got there first has also made the target the owner and cleared DLM_LOCK_RES_MIGRATING. Treating the attempt as failed at that point would leave the lockres owned by the target while this node still holds the other nodes' locks and refmap bits, so it could neither be purged nor migrated again. Finish our side as a completed migration does instead: drop those locks under res->spinlock if the target still owns the lockres, and recalculate its usage. Use the same cleanup for the pre-send failure, the send failure and the target-death failure paths. The sender's in-use reference keeps the MLE alive until its final put outside the nested locks. Successful migration retains its existing in-use-only put. A target that has died cannot assert after the sender has seen its death. The o2net node-down callback runs before the DLM one; it disconnects the node and flushes the workqueue that runs the message handlers, so an assertion already received has been handled by the time the DLM removes the node from the domain map. A node that leaves the domain cleanly sends its exit message only after its assertions have been answered. Two windows of the hand-over itself are left as they are: the handler switches the owner and the sender drops the other nodes' locks moments later, and an assertion from a live target that arrives after the sender has given up still meets the owner check in the handler. Waiting for the target before giving up would only stretch the first window into the time in which recovery of the target can observe it. KASAN report, only the relevant frames are kept: BUG: KASAN: slab-use-after-free in dlm_put_mle_inuse+0xce/0xe0 Read of size 8 at addr ffff8881190e3c20 by task umount/593 Call Trace: <TASK> dlm_put_mle_inuse+0xce/0xe0 dlm_migrate_lockres+0x16af/0x20d0 dlm_empty_lockres+0x60a/0xbd0 dlm_unregister_domain+0x53b/0x11d0 o2cb_cluster_disconnect+0xa5/0x110 ocfs2_cluster_disconnect+0x73/0xc0 ocfs2_dlm_shutdown+0x311/0x440 ocfs2_dismount_volume+0x696/0x940 generic_shutdown_super+0x15f/0x490 kill_block_super+0x40/0xa0 deactivate_locked_super+0xae/0x120 deactivate_super+0xa2/0xc0 cleanup_mnt+0x217/0x450 task_work_run+0x144/0x230 </TASK> Allocated by task 593: kmem_cache_alloc_noprof+0x20b/0x5c0 dlm_migrate_lockres+0x20e/0x20d0 dlm_empty_lockres+0x60a/0xbd0 dlm_unregister_domain+0x53b/0x11d0 o2cb_cluster_disconnect+0xa5/ ---truncated---

    Other OS & kernel Linux

    unscored No fix listed
  11. CVE-2026-99694

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not index before the entry array when dividing an empty bucket ocfs2_divide_xattr_bucket() appends an empty bucket carrying a sentinel hash when the source bucket has no divide position, taking that hash from xh_entries[start - 1]. ocfs2_xattr_find_divide_pos() returns count when every entry shares one hash, and its loop does not run at all for count < 2, so an empty bucket comes back with start == count == 0 and the read is xh_entries[-1]. That is outside the __counted_by_le(xh_count) bounds of xh_entries[] and lands on the header, so the value picked up is xh_count | xh_free_start << 16. One above it is written into the new bucket's xh_entries[0] and committed, which leaves a bucket whose first hash does not follow the bucket before it. ocfs2_xattr_bucket_find() binary searches on xh_entries[0], so the broken key hides the range the sentinel was meant to cover: getxattr() answers -ENODATA for an attribute that is stored, and an insert can go to the wrong bucket and leave two copies of a name. The cross cluster divide hands the same value back as a tree record's e_cpos, which then claims a hash range it does not cover. Read xh_entries[0] instead. The branch is only reached when every entry shares one hash, so for a non-empty bucket it holds the same value, and for an empty one it is the slot that carries the bucket key. An empty bucket reaches the divide from ocfs2_check_xattr_bucket_collision(), which reports no collision for one, through ocfs2_add_new_xattr_bucket() and ocfs2_extend_xattr_bucket(). It does not take a failed set to get there: a divide that finds no position is itself what leaves an empty sentinel bucket behind, and a later extend can pick it as the target.

    Memory safety OS & kernel Linux

    unscored No fix listed
  12. CVE-2026-99695

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after converting a block to a bucket ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set. Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there. Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block. The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again.

    Other OS & kernel Linux

    unscored No fix listed
  13. CVE-2026-99682

    In the Linux kernel, the following vulnerability has been resolved: virtio_blk: use synchronous quiesce in virtblk_freeze_priv() blk_mq_run_work_fn() can call blk_mq_sched_dispatch_requests() through blk_mq_run_dispatch_ops(). The dispatcher checks QUEUE_FLAG_QUIESCED while the flag is clear. It can then be preempted before it gets a request. At that time, it has no queue usage reference, so blk_mq_freeze_queue() does not wait for it. virtblk_freeze_priv() then calls blk_mq_quiesce_queue_nowait() and blk_mq_unfreeze_queue(). A new request can enter the queue. The old dispatcher can run again, use its old flag check, get the new request, and call virtio_queue_rq(). At the same time, virtblk_freeze_priv() can reset the device, delete the virtqueues, and free vblk->vqs. The old dispatcher can then use a deleted virtqueue or a NULL vblk->vqs, and the kernel can crash. Fix this by using blk_mq_quiesce_queue(), which waits for dispatch code that was already running. Keep the existing freeze and unfreeze order. The queue remains quiesced until virtblk_restore_priv() calls blk_mq_unquiesce_queue().

    Denial of service OS & kernel Linux

    unscored No fix listed
  14. CVE-2026-99683

    In the Linux kernel, the following vulnerability has been resolved: vduse: fix VA/PA confusion in the coherent page fault path vduse_domain_get_coherent_page() assumes that iotlb entries above bounce_size were installed by vduse_domain_alloc_coherent(), so it treats map->addr as a physical address. But vduse registers with use_va = true, and when the device is bound to vhost_vdpa, vhost_vdpa_va_map() stores a userspace virtual address in map->addr, which vduse_domain_set_map() then copies into the same iotlb. A process holding the domain file descriptor across a rebind can therefore fault in an arbitrary physical page with read/write access, ignoring the entry permissions. Additionally, since the domain file mmap lacks VM_IO, the domain file itself can be mapped and passed to vhost_vdpa_va_map(), producing self-referential entries that bypass the coherent path check. To fix, only translate entries whose backing file is the domain file itself in vduse_domain_get_coherent_page(), reject such entries in vduse_domain_set_map() since only external mappings should be imported, and set VM_IO on the domain file mmap so vhost_vdpa_va_map() refuses to map it in the first place.

    Other OS & kernel Linux

    unscored No fix listed
  15. CVE-2026-99684

    In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio - prevent use-after-free after a failed restore remove_common() frees the driver data during freeze, but does not clear vdev->priv, which points to freed memory. If probe_common() then fails during restore, a later remove or freeze can dereference the dangling pointer. Clear vdev->priv on the probe_common() error cleanup path and before freeing the driver data in remove_common(). Also reset the device and return early from remove_common() if vdev->priv is already NULL for a safe teardown after a failed restore.

    Memory safety OS & kernel Linux

    unscored No fix listed
  16. CVE-2026-99685

    In the Linux kernel, the following vulnerability has been resolved: iommu/virtio: Reset device before deleting virtqueues on probe failure viommu_probe() marks the device DRIVER_OK before populating the event virtqueue and registering the IOMMU device in sysfs. viommu_fill_evtq() hands the device a set of device-writable buffers through virtqueue_add_inbuf(), so from that point on the device may write into them and into the rings. If either step fails, the error path deletes the virtqueues without resetting the device first. The event buffers are allocated with devm_kmalloc_array() and are released as probe unwinds, so the device can go on writing to memory that has been freed. Reset the device before deleting the virtqueues, the way viommu_remove() already does.

    Other OS & kernel Linux

    unscored No fix listed
  17. CVE-2026-99686

    In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1).

    Other OS & kernel Linux

    unscored No fix listed
  18. CVE-2026-99687

    In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands.

    Other OS & kernel Linux

    unscored No fix listed
  19. CVE-2026-99688

    In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: prevent aggregate self-replacement qfq_change_class() snapshots the current aggregate settings while holding the qdisc tree lock, but drops the lock before selecting the destination aggregate. During that gap, qfq_enqueue() can move the class to an aggregate matching the requested settings. When qfq_change_class() resumes, qfq_find_agg() then returns cl->agg. If it is a singleton, qfq_deact_rm_from_agg() frees the aggregate before qfq_add_to_agg() immediately accesses the same pointer, causing a use-after-free. While holding the tree lock, skip the replacement when the destination is already the current aggregate. Any estimator replacement has already completed, so the class change can finish normally.

    Memory safety OS & kernel Linux

    unscored No fix listed
  20. CVE-2026-99689

    In the Linux kernel, the following vulnerability has been resolved: xfs: fix temporary cursor leak in btree shift corruption paths In xfs_btree_lshift and xfs_btree_rshift, when XFS_IS_CORRUPT detects an invalid firstrec/lastrec result after xfs_btree_dup_cursor has successfully allocated a temporary cursor, the error path jumps to error0 which returns without freeing tcur. This leaks the cursor memory, the xfs_group reference, and the per-level buffer references held by the duplicated cursor. Jump to error1 instead, which calls xfs_btree_del_cursor(tcur, XFS_BTREE_ERROR) to properly release all resources.

    Memory safety OS & kernel Linux

    unscored No fix listed
  21. CVE-2026-99674

    In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs.

    Memory safety OS & kernel Linux

    unscored No fix listed
  22. CVE-2026-99675

    In the Linux kernel, the following vulnerability has been resolved: nvmet: reject keep-alive timeouts that would overflow nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000). The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above 4294966296 ms wraps around and rounds to 0 seconds. A Set Features command with KATO 0xffffffff then succeeds but disables the keep-alive timer: Get Features returns 0 and Keep Alive fails with Keep Alive Timeout Invalid. A Connect command with such a KATO creates a controller without a keep-alive timer. The converted value has more consumers that can overflow. Get Features multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits and arm a delay that must not exceed MAX_JIFFY_OFFSET. Reject a KATO whose rounded value does not fit all of these. Return Keep Alive Timeout Invalid from both Set Features and Connect. Validate Set Features before stopping the current timer so a failed update leaves its timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current meaning.

    Other OS & kernel Linux

    unscored No fix listed
  23. CVE-2026-99676

    In the Linux kernel, the following vulnerability has been resolved: net: restore refcount ordering for lockless socket access Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations of refcount_t"), default builds implemented refcount_inc_not_zero() using atomic_add_unless(), which provided full memory ordering on success. The commit removed that ordering on weakly ordered architectures, allowing accesses after a successful reference acquisition to be reordered before it. Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established lookups and in inet_twsk_purge(), where the socket is validated again after taking a reference. bpf_sk_assign() can receive a socket pointer obtained through BTF without a reference. Use acquire ordering when it takes its own reference for a refcounted socket. Use refcount_set_release() when setting refcounts in the SYN cookie, TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing TIME_WAIT smp_wmb(), which separately orders the refcount store before ehash publication.

    Other OS & kernel Linux

    unscored No fix listed
  24. CVE-2026-99677

    In the Linux kernel, the following vulnerability has been resolved: xfs: clamp the pNFS layout range to the maximum file size xfs_fs_map_blocks() lets two bad layout ranges through. An offset of 2^63 or more is negative and passes "offset > limit". A length above the limit, such as NFS4_UINT64_MAX, wraps "offset > limit - length" and stays unclamped. With NFS4_UINT64_MAX, a read layout is built from an uninitialized mapping. Reject a negative offset and one at the limit, and clamp the length. This needs "xfs: cap the block count of xfs_iomap_write_direct() at one extent".

    Other OS & kernel Linux

    unscored No fix listed
  25. CVE-2026-99678

    In the Linux kernel, the following vulnerability has been resolved: xfs: cap the block count of xfs_iomap_write_direct() at one extent xfs_iomap_write_direct() reserves blocks for the whole count in an unsigned int. For a pNFS layout the client chooses that count, and an RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down. xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap the count at that. nfsd asks again for the rest. The other callers get the same mapping as before.

    Other OS & kernel Linux

    unscored No fix listed
  26. CVE-2026-99679

    In the Linux kernel, the following vulnerability has been resolved: xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks A client can commit a hole in a LAYOUTCOMMIT, because nfsd does not check the extents against its layouts. xfs_iomap_write_unwritten() then allocates written blocks there. A large hole overruns the block reservation and shuts XFS down. A small one exposes stale data. Refuse such a range with -EIO, using XFS_BMAPI_CONVERT_ONLY.

    Other OS & kernel Linux

    unscored No fix listed
  27. CVE-2026-99680

    In the Linux kernel, the following vulnerability has been resolved: xfs: mark the inode preallocated for pNFS write layouts past EOF xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it allocates blocks for a write layout. A write layout past EOF can also hand out allocated blocks, such as speculative preallocation. blockgc then frees them under the layout, and another file may get them. Mark the inode whenever a write mapping ends past EOF.

    Other OS & kernel Linux

    unscored No fix listed
  28. CVE-2026-99681

    In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return.

    Memory safety OS & kernel Linux

    unscored No fix listed
  29. CVE-2026-99667

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp() try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the page table, and takes the PMD lock and the PTE lock to remove it. In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the page table. The pmd_same() check is supposed to handle this, but it is only done with CONFIG_SPLIT_PTE_PTLOCKS. Fix it by performing the check unconditionally. Fix generated by an LLM and sent by Josef Bacik in private. [ david: adjust description ]

    Other OS & kernel Linux

    unscored No fix listed
  30. CVE-2026-99668

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  31. CVE-2026-99669

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix truncate racing with PMD zapping zap_huge_pmd_folio() removes the rmap before calling folio_mark_dirty(). If this was the last mapping, truncation can skip unmapping the folio and proceed without waiting for the PMD lock, racing with dirtying. ifs_set_range_dirty() can oops if MADV_DONTNEED races with ftruncate() on XFS, when we get the folio set dirty after it was found to not be mapped anymore. Move folio_mark_dirty() and folio_mark_accessed() before rmap removal, matching the PTE zap path. This keeps the folio mapped while updating its state, so truncation must wait for the page table lock. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ]

    Other OS & kernel Linux

    unscored No fix listed
  32. CVE-2026-99670

    In the Linux kernel, the following vulnerability has been resolved: can: dev: can_fill_info(): don't wake up controller if interface is down If the interface is down, the CAN controller might be powered down and its clocks gated. Don't call do_get_berr_counter() to read the bus error counters if the interface is down, and adjust can_get_size() to match. This removes one trigger for a synchronous external abort seen on i.MX8QXP when "ip link show" is run on a flexcan interface that was never brought up. The underlying cause is platform-specific: on i.MX8QXP the CAN clocks are gated through the SCU LPCG and the subsystem shares the IMX_SC_R_CAN_0 power domain, and there is a window after pm_runtime_resume_and_get() returns where the clock has not reached the module yet. This patch avoids the netlink query path while the interface is down, but does not root-cause the LPCG window itself. As a result, IFLA_CAN_BERR_COUNTER is no longer reported for down interfaces. Userspace must treat the attribute as optional. The issue was triggered on an i.MX8QXP board by running "ip link show" without ever bringing the interface up: Internal error: synchronous external abort: 0000000096000210 pc : flexcan_read_le+0x0/0x18 lr : flexcan_get_berr_counter+0x4c/0x8c Call trace: flexcan_read_le+0x0/0x18 flexcan_get_berr_counter+0x4c/0x8c can_fill_info+0x1f8/0x434 rtnl_fill_ifinfo+0x8fc/0xbb4 rtnl_dump_ifinfo+0x364/0x448 This is the same class of problem fixed for m_can in commit 91a55c72a821 ("can: m_can: m_can_get_berr_counter(): don't wake up controller if interface is down").

    Other OS & kernel Linux

    unscored No fix listed
  33. CVE-2026-99671

    In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch.

    Other OS & kernel Linux

    unscored No fix listed
  34. CVE-2026-99672

    In the Linux kernel, the following vulnerability has been resolved: can: protect the receive lists with a per-device lock The receive lists of a CAN device are located in the device's can_ml_priv and travel with the device when it is moved to another network namespace. But they are protected by the per-netns rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the right lock and silently returns when the passed namespace does not match dev_net(dev) anymore. isotp_release() and bcm_release() leave their notifier list before they take any lock that serializes against the netdev notifier, which runs under RTNL. When the bound device is moved to another namespace in this window, the notifier skips the socket and the release path has to remove the filters itself. isotp_release() passes the socket's namespace, which does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev), which can_rx_unregister() reads again for its check, so a namespace change between both reads makes the check fail as well. In both cases can_rx_unregister() silently returns. As can_rx_register() stores rcv->sk without a reference, the remaining receivers point to the freed socket (isotp) or the freed op (bcm): BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0 Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578 can_rcv_filter+0x4af/0x8c0 can_receive+0x28d/0x3c0 can_rcv+0x2a9/0x310 __netif_receive_skb_one_core+0x21a/0x260 process_backlog+0x210/0x760 Besides this, the lists of a device are protected by the rcvlists_lock of the namespace that is passed in. Callers which pass dev_net(dev) read it at different times, so the same lists may be modified under the locks of different namespaces while the device is moved. Taking RTNL in these release paths is no option: raw_bind(), raw_setsockopt() and raw_release() already hold RTNL while adding and removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged users can trigger repeatedly and which makes RTNL a global bottleneck. Instead fix the root cause and add a spinlock to struct can_dev_rcv_lists, which protects the receive lists of a CAN device or the 'any' CAN device lists of a namespace. It is initialized in can_set_ml_priv(), which is used by all CAN network devices. With this, can_rx_unregister() finds the subscription independently of the current namespace of the device. The protocols keep the device valid with their tracked references. The per-netns rcvlists_lock only protects the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP pass the namespace that has been used for can_rx_register(). So isotp_release() and bcm_release() now remove their filters correctly without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and isotp_bind() do not need RTNL anymore and add and remove their filters under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind() publishes the device inside the RCU section of its lookup, and raw_notify() and isotp_notify() recheck the bound device under lock_sock(). As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks IFF_UP after publishing the bound device, with a barrier pair against raw_notify() and isotp_notify(), so a down transition during bind() is still reported with ENETDOWN.

    Other OS & kernel Linux

    unscored No fix listed
  35. CVE-2026-99673

    In the Linux kernel, the following vulnerability has been resolved: can: replace ARPHRD_CAN type checks with can_get_ml_priv() Commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") introduced an explicit way to assign the midlayer private pointer (dev->ml_priv) to named users like ML_PRIV_CAN. A valid pointer returned by can_get_ml_priv() therefore identifies a real CAN device. The referenced commit only converted the j1939 and proc code to this check, while the other parts of the CAN subsystem still rely on dev->type == ARPHRD_CAN. The TUNSETLINK ioctl allows a down TUN/TAP device to set its hardware type to ARPHRD_CAN while dev->ml_priv remains NULL. Such a repurposed netdevice passes the ARPHRD_CAN checks. Commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") already made can_rx_register() reject such devices. But can_rx_unregister() still only checks dev->type and dereferences the NULL ml_priv when it walks the receive lists of the device. CAN_ISOTP reaches this path: isotp_bind() ignores the return values of can_rx_register() and binds the socket anyway. When the socket is released or the device is unregistered, isotp_release() and isotp_notify() remove the filters that have never been registered and trigger the NULL pointer dereference in can_rx_unregister(). This only requires owning a TUN/TAP device or CAP_NET_ADMIN in an unprivileged user namespace. Convert the remaining ARPHRD_CAN checks in af_can, bcm, gw, isotp and raw to can_get_ml_priv().

    Other OS & kernel Linux

    unscored No fix listed
  36. CVE-2026-99660

    In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: write-lock the VMA before waking waiters when unregistering userfaultfd_unregister() wakes pending missing faults before clearing the VMA's userfaultfd registration. With per-VMA fault locking, holding mmap_lock for write does not prevent another fault from queuing after the wakeup but before userfaultfd_clear_vma() write-locks the VMA. That waiter can then remain asleep indefinitely. Call vma_start_write() before waking waiters. Existing fault handlers queue themselves before dropping the VMA read lock, and new readers are excluded until mmap_write_unlock().

    Other OS & kernel Linux

    unscored No fix listed
  37. CVE-2026-99661

    In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early.

    Memory safety OS & kernel Linux

    unscored No fix listed
  38. CVE-2026-99662

    In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Memory safety OS & kernel Linux

    unscored No fix listed
  39. CVE-2026-99663

    In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix clearing folios in memfd_pin_folios() memfd_pin_folios() pins folios obtained directly from the page cache without checking whether they are uptodate. However, shmem fallocate() can leave newly allocated folios uncleared and not uptodate. Callers such as udmabuf can then expose uninitialized memory to userspace. Clear non-uptodate folios and mark them uptodate under the folio lock before returning them to the caller. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description and comment ]

    Memory safety OS & kernel Linux

    unscored No fix listed
  40. CVE-2026-99664

    In the Linux kernel, the following vulnerability has been resolved: mm/gup: recheck the PUD under PTL in follow_pud_mask() follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes the lock and calls follow_huge_pud(), which reads the entry again, but only tests whether it is present. A leaf can be zapped concurrently and a page fault can fill the empty entry with a page table. This currently only applies when device-dax makes use of PUD entries, and the fault after e.g., MADV_DONTNEED would find THPs to be disabled. That requires a sequence like 1) Fault in the PUD 2) Disable THP 3) Have GUP race against concurrent MADV_DONTNEED + refault Which is rather unlikely to happen in practice, which is why we never received a report about such a problem. Before commit 1b1676180246 ("mm/gup: handle huge pud for follow_pud_mask()"), we performed that check in follow_devmap_pud() by testing for pud_devmap(). Let's fix it by just structuring follow_pud_mask() similar to follow_pmd_mask(), minus protnone stuff that does not apply and minus FOLL_SPLIT_PMD handling. That makes it much easier to spot any such inconsistencies. Perform the pud_bad() check early in follow_pmd_mask() and just forward the PUD value. We can drop the pud_present() check in follow_huge_pud(), just like we have in follow_huge_pmd(). Even though we are performing more changes than strictly necessary, the fix should be easy to backport.

    Other OS & kernel Linux

    unscored No fix listed
  41. CVE-2026-99665

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: preserve dirty bits when collapsing PTE-mapped THPs try_collapse_pte_mapped_thp() clears PTEs without transferring their dirty bits to the folio. A shmem read fault can map a clean folio writable, so a later store only dirties the PTE. Losing that dirty bit allows reclaim to discard modified data. The assumption that regular files are read-only is also obsolete since commit 1b6444331bebb ("mm/khugepaged: enable clean pagecache folio collapse for writable files"). In any case, transferring PTE dirty bits to the folio when removing mappings (and while the folio is still mapped) is the right thing to do. Use get_and_clear_ptes() to collect the dirty bits and mark the folio dirty before unmapping it. Update the comment. This was reproduced with shmem using MADV_COLLAPSE followed by MADV_PAGEOUT. Fix generated by an LLM and sent by Chris Mason in private. [ david: adjust comment; simplify description; cover file-thp as well ]

    Other OS & kernel Linux

    unscored No fix listed
  42. CVE-2026-99666

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]

    Other OS & kernel Linux

    unscored No fix listed
  43. CVE-2026-99653

    In the Linux kernel, the following vulnerability has been resolved: mm: fix unkillable fault loop on MAP_DROPPABLE memory handle_mm_fault() suppresses VM_FAULT_OOM for VM_DROPPABLE mappings. For user-mode faults, pending signals are processed before retrying the access. Kernel-mode faults on user buffers instead return directly to the faulting instruction. With persistent allocation failures (esp. memcg limits), a syscall, such as write(), can therefore loop while not dropping locks. Only suppress VM_FAULT_OOM when FAULT_FLAG_USER is set, allowing kernel-mode faults and GUP to fail and signal allocation errors. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  44. CVE-2026-99654

    In the Linux kernel, the following vulnerability has been resolved: mm: fix unmap_mapping_range() beyond 4 GiB on 32-bit Commit 9eab0421fa94 ("mm: fix unmap_mapping_range high bits shift bug") made holebegin and holelen unsigned before they are shifted, by casting them to pgoff_t. That is an unsigned long: on a 32-bit kernel the cast cuts off the upper half of the two loff_t values, so a hole which begins at 4 GiB or beyond is taken for one in the first 4 GiB of the file. truncate_pagecache() passes the new size of the file and asks for private COWed pages to be unmapped as well. If a file of 6 GiB is truncated to 5 GiB, everything from 1 GiB on is unmapped, and what a process has written to a private mapping of the range between 1 GiB and 5 GiB is lost: it reads the contents of the file again. Where the range has an end, the wrong range is unmapped instead of the right one. The page cache copes with that, as it unmaps every folio that it removes. The callers which only have unmap_mapping_range() to get rid of user mappings do not, for example drm_vma_node_unmap(), whose fake offsets reach beyond 4 GiB on 32-bit, and revoke_iomem() with physical addresses of more than 32 bits. Cast to u64 instead. Nothing changes for 64-bit kernels. Fix generated by an LLM and sent by Josef Bacik in private.

    Memory safety OS & kernel Linux

    unscored No fix listed
  45. CVE-2026-99655

    In the Linux kernel, the following vulnerability has been resolved: mm/memory: reject remote COW faults on PFN mappings When handling a COW fault without a normal source page (PFN mappings), __wp_page_copy_user() copies from the faulting user address. For remote faults, this accesses the wrong address space, resulting in wrong data getting copied. For example, user_events updates an enable bit in the registering process's memory. If that memory needs to be faulted in, user_event_enabler_fault_fixup() calls fixup_user_fault() from a work item. Placing the enable bit in a private PFN mapping can trigger this remote COW path. Reject these faults with VM_FAULT_SIGBUS when the target mm differs from current->mm: remote faults. Ordinary (non-PFN) mappings are not affected. The user-address copy dates back to commit 6aab341e0a28 ("mm: re-architect the VM_UNPAGED logic"); likely, actual ways to get remote faults in there on COW PFN mappings appeared afterwards. But the fix is simple and straight forward. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ]

    Memory safety OS & kernel Linux

    unscored No fix listed
  46. CVE-2026-99656

    In the Linux kernel, the following vulnerability has been resolved: mm/madvise: fix data loss from MADV_FREE on a KSM page MADV_FREE can clear the dirty flag of a singly mapped KSM folio. The folio remains in the stable tree and can gain new mappings without being dirtied again. Once marked lazyfree, reclaim can discard data that those mappings still need. KSM always marks a folio dirty when converting it to a KSM folio in try_to_merge_one_page(). Marking a folio lazyfree clears PG_swapbacked but leaves PG_dirty unchanged. Preserving PG_dirty makes reclaim restore PG_swapbacked instead of discarding the folio. This also protects folios that were already lazyfree when KSM converted them. Skip KSM folios before clearing their dirty flag, checking under the folio lock to serialize with KSM conversion.

    Other OS & kernel Linux

    unscored No fix listed
  47. CVE-2026-99657

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  48. CVE-2026-99658

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: finish non-blocking interval invalidation on error When an ordinary MMU notifier rejects a non-blocking invalidation, the interval invalidation started beforehand is left unfinished: the caller skips mmu_notifier_invalidate_range_end(). Subsequent interval notifier operations can then wait forever. The only in-tree trigger is nouveau SVM, which uses both notifier types and rejects non-blocking invalidations. Reaping via the OOM reaper or process_mrelease() can therefore leave the GPU fault worker stuck, holding a reference that prevents the dying process's address space and memory from being freed. End the interval invalidation when an ordinary notifier fails a non-blocking invalidation, like mn_itree_invalidate() already does when an interval notifier fails. Make that handling clearer in the documentation of mmu_notifier_invalidate_range_start_nonblock(). Fix generated by an LLM and sent by Josef Bacik in private. [ david: simplify description, update function doc ]

    Other OS & kernel Linux

    unscored No fix listed
  49. CVE-2026-99659

    In the Linux kernel, the following vulnerability has been resolved: mm/mmu_gather: fix flushing ranges with 4 GiB or larger __tlb_adjust_range() takes the size of the range which has to be flushed as an unsigned int. Its callers, tlb_flush_{pte,pmd,pud,p4d}_range(), get and pass an unsigned long. Consequently, a range that is 4 GiB or larger gets truncated, possibly to 0. On arm64 with hugetlb, a 64k kernel can have 16 GiB hugetlb folios mapped contiguously at the PMD level and flush them when unmapping, and a 16k kernel can flush 64 GiB PUDs through tlb_unshare_pmd_ptdesc(). So at least these two scenarios are affected. Fix it by flushing the proper range instead of the truncated one by properly using "unsigned long" for range_size. Fix generated by an LLM and sent by Josef Bacik in private. [ david: use two-tab indent, simplify description ]

    Other OS & kernel Linux

    unscored No fix listed
  50. CVE-2026-99645

    In the Linux kernel, the following vulnerability has been resolved: mm/cma: don't release CMA pages still in use When a driver calls dma_free_contiguous() before quiescing DMA, the page might still have a reference from the device. put_page_testzero() there returns false, WARN fires, but the code proceeds to free_contig_frozen_range() putting a live page onto buddy and clearing the bitmap. A subsequent allocation can hand the same PFN to a new owner while the original holder still references it. A concurrent put_page() that drops the last reference between the testzero loop and free_contig_frozen_range() can double-queue the page via page->lru, corrupting buddy lists. Avoid the corruption by not freeing a CMA region if any of the pages inside are still in use. Make it explicit in the warning that the driver allowed a leak. While at it, use page_ref_freeze() to make the semantics clearer and switch to pr_warn_ratelimited(). [ david: use page_ref_freeze() + pr_warn_ratelimited() ]

    Memory safety OS & kernel Linux

    unscored No fix listed

CVEs for which no patch, fixed version or vendor advisory is linked in the CVE.org or NVD record. Treat these as exposed until the vendor says otherwise.